Items where Division is "Malaysia-Japan International Institute of Technology" and Year is 2023

Article

Mafroos, Mahroof Mohamed and Nur Ameelia, Nur Ameelia and Jameela, Husni Hani and Hamzah, Azura (2023) Characterizing passively Q-switched fiber laser in LIDAR application. International Journal of Integrated Engineering, 15 (3). pp. 170-176. ISSN 2229-838X

Khairi, Ahmad Adzlan Fadzli and Yassin, Abdullah and Abang Kamaruddin, Abang Mohammad Nizam and Mat Ali, Mohamed Sukri and Maruai, Nurshafinaz (2023) Numerical simulation of drying process within a novel rotary drying machine for palm oil sludge. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 33-42. ISSN 2289-7895

Mohamad Rashid, Nur Nadhirah and Ahmad, Harith and Ismail, Mohammad Faizal and Zuikafly, Siti Nur Fatin and Nordin, Nur Azmah and Koga, Tsuyoshi and Yahya, Wira Jazair and Yahaya, Hafizal and Ahmad, Fauzan (2023) Passively Q-switched thulium-holmium doped fibre laser with electrochemical exfoliation graphene in chitin based passive saturable absorber. Journal of Advanced Research in Micro and Nano Engineering, 11 (1). pp. 1-14. ISSN 2756-8210

Xiao, Xiong and Kim, Dongchan and Jiao, Fuyu and Yang, Xiaoxian and Al Ghafri, Saif and Siahvashi, Arman and Tsuji, Tomoya and Yukumoto, Atsuhiro and Seiki, Yoshio and Stanwix, Paul L. and May, Eric F. (2023) Viscosity, thermal conductivity, and interfacial tension study of CO2+difluoromethane (R32). International Journal of Refrigeration, 152 (NA). pp. 331-342. ISSN 0140-7007

A. Ghafar, Nawal and Che Jusoh, Nurfatehah Wahyuny and Jamian, Nor Ruwaida (2023) Effect of gas compositions on binary CO2-N2 adsorption of pomelo peel-based activated carbon. Chemical Engineering Transactions, 106 (NA). pp. 1099-1104. ISSN 2283-9216

Abd. Ghafar, Nawal and Jamian, Norruwaida and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny (2023) Binary carbon dioxide and nitrogen adsorption on pomelo peel-derived porous sorbent. Chemical Engineering Research and Design, 199 (NA). pp. 21-32. ISSN 0263-8762

Abd. Rahman, Amirah and Kamardin, Kamilia and Yamada, Yoshihide and Takahashi, Masaharu (2023) Near-field microwave focusing evaluation of dielectric lens antenna for human body model. Indonesian Journal of Electrical Engineering and Computer Science, 29 (1). pp. 161-173. ISSN 2502-4752

Abdul Aziz, Nur’Afiqah and Zuikafly, Siti Nur Fatin and Lokman, Muhammad Quisar and Harun, Sulaiman Wadi and Ahmad, Fauzan (2023) Zinc oxide nanoparticles-poly(vinyl) alcohol thin film for generation Q-switched erbium-doped fiber laser. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 228-237. ISSN 2462-1943

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2023) Hydrogen fuel cell technology revolution and intervention using TRIZ S-curve analysis for automotive system innovation. Chemical Engineering and Technology, 46 (12). pp. 2590-2599. ISSN 0930-7516

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2023) Innovation process of hydrogen fuel cell storage technology using the theory of inventive problem solving (TRIZ). Chemical Engineering and Technology, 46 (12). pp. 2635-2643. ISSN 0930-7516

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib (2023) Patented technology innovation portfolio in producing biofuel using the theory of inventive problem solving (TRIZ) methodology. Chemical Engineering and Technology, 46 (12). pp. 2654-2660. ISSN 0930-7516

Abdul Rahim, Zulhasni and Iqbal, Muhammad Saqib and Abdul Rahim, Nor Azian and Ohshima, Naoki (2023) Sustainable industrial revolution competency framework for 5G technology applications using TRIZ. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 336-344. ISSN 2462-1943

Abdul Rahman, Hasbullah and Rahman, Md. Mujibur and Yahya, Wira Jazair and Kaonain, Tamanna E. and Abd Kadir, Hasannuddin and Mohd. Tamam, Mohamad Qayyum and Ithnin, Ahmad Muhsin and Ahmad, Fauzan and Abdullah, Mohd. Fareez Edzuan and Noge, Hirofumi and Hong, Chungpyo and Otaka, Takeshi (2023) Implementation of a non-surfactant water-in-diesel emulsion fuel in a common rail direct injection diesel vehicle. International Journal of Automotive Technology, 24 (5). pp. 1349-1358. ISSN 1229-9138

Abu Bakar, Shahirah and Md. Arifin, Norihan and Pop, Ioan (2023) Stability analysis on mixed convection nanofluid flow in a permeable porous medium with radiation and internal heat generation. Journal of Advanced Research in Micro and Nano Engineering, 13 (1). pp. 1-17. ISSN 2756-8210

Adiputra, Dimas and Asfari, Ully and Ubaidillah, Ubaidillah and Abdul Rahman, Mohd. Azizi and Harun, Ahmad Mukifza (2023) Immediate effect evaluation of a robotic ankle–foot orthosis with customized algorithm for a foot drop patient: a quantitative and qualitative case report. International Journal of Environmental Research and Public Health, 20 (4). pp. 1-13. ISSN 1661-7827

Ahmad, Imran and Abdullah, Norhayati and Koji, Iwamoto and Yuzir, Ali and Ahmad, Mohd. Danish and Nova Rachmadona, Nova Rachmadona and Al-Dailami, Anas and Show, Pau Loke and Khoo, Kuan Shiong (2023) Micro and macro analysis of restaurant wastewater containing fat, oil, grease (fog): an approach based on prevention, control, and sustainable management. Chemosphere, 325 (NA). NA-NA. ISSN 0045-6535

Ahmad, Imran and Ibrahim, Natasha Nabila and Abdullah, Norhayati and Iwamoto, Koji and Mohamad, Shaza Eva and Khoo, Kuan Shiong and Cheah, Wai Yan and Ling, Tau Chuan and Show, Pau Loke (2023) Bioremediation strategies of palm oil mill effluent and landfill leachate using microalgae cultivation: An approach contributing towards environmental sustainability. Chinese Chemical Letters, 34 (5). NA-NA. ISSN 1001-8417

Ahmad, Nurul ‘Uyun and Mad Nordin, Mariam Firdhaus and Mokhtar, Norrashidah and Mohamad Abdul Wahab, Izzati and Mohamad, Mardawani and Tan, Ka Liong and Mohd. Amir, Siti Nur Khairunisa (2023) Zingiber zerumbet: pharmacological values of zerumbone and the extraction technology evolution. Jurnal Teknologi, 85 (2). pp. 21-30. ISSN 0127-9696

Ahmad Asmadi, Adilah and Tamunaidu, Pramila and Goto, Masafumi and Utsumi, Motoo (2023) Effects of rice husk and rice straw hydrochar as soil amendment. Chemical Engineering Transactions, 106 (NA). pp. 1225-1230. ISSN 2283-9216

Ahmad Sukri, Ikmal Alif and Fukuda, Kanao and Kamis, Shahira Liza and Mat Tahir, Noor Ayuma (2023) Tribological properties improvement of 3D-printed parts by in-process addition of graphite particles into the top layer. Jurnal Tribologi, 39 (NA). pp. 134-142. ISSN 2289-7232

Aiman Rosol, Ahmad Haziq and Hamzah, Azura and Zulkipli, Nur Farhanah and Harun, Sulaiman Wadi (2023) Ti3C2Tx saturable absorber (SA) as Q-switched initiator in passive neodymium doped fiber laser (NDFL). Optical Fiber Technology, 81 (NA). NA. ISSN 1068-5200

Al Rizeiqi, Nasser and Azzouz, Amirah and Liew, Peng Yen (2023) Multi-criteria evaluation of large-scale hydrogen storage technologies in oman using the analytic hierarchy process. Chemical Engineering Transactions, 106 (NA). pp. 1117-1122. ISSN 2283-9216

Alhassan, Yusuf and Kunya, Bashir Isyaku and Che Sidik, Nor Azwadi (2023) Numerical analysis of wind turbine performance using different blade materials under wind load deflection. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 103 (2). pp. 1-11. ISSN 2289-7879

Ali, N. A. and Ismail, M. and Nasef, M. M. and Jalil, A. A. (2023) Enhanced hydrogen storage properties of NaAlH4 with the addition of CoTiO3 synthesised via a solid-state method. Journal of Alloys and Compounds, 934 (167932). NA-NA. ISSN 0925-8388

Ali Khorsand Zak, Ali Khorsand Zak and Hashim, Abdul Manaf and Esmaeilzadeh, Javad (2023) XPS studies and Kramers-Kronig analysis of the optical properties of ZnO/SnO2 nanocomposites synthesized by gelatin-based sol-gel method. Optical Materials, 142 (NA). NA. ISSN 0925-3467

Amzah, Nur Faiqah and Mohamad, Shaza Eva and Md. Akhir, Fazrena Nadia and Othman, Fatin Syahirah and Suzuki, Iwane and Maeda, Yoshiaki (2023) Effect of agitation on growth and fatty acid composition of green microalgae acutodesmus obliquus Q2-12E. Chemical Engineering Transactions, 106 (NA). pp. 1231-1236. ISSN 2283-9216

Aswadi, Muhammad Aisar Harraz and Abdul Halim, Hairul Nazirah and Nasaruddin, Nur Farhana Najwa and Mahmad Rozi, Siti Khalijah and Mokhtar, Zulfakar and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny (2023) Kinetics and Effects of Process Parameters on Oil Adsorption using Activated Carbon from Rubber Seed Kernels (Hevea brasiliensis). Chemical Engineering Transactions, 106 (NA). pp. 991-996. ISSN 2283-92161

Awang Lah, Airull Azizi and Sulaiman, Abdul Hadi and Abdullah, Fairuz and Ambran, Sumiaty and Ng, Eng Khoon and Alresheedi, Mohammed Thamer and Mahdi, Mohd. Adzir and Md. Yusoff, Nelidya (2023) Stable triple-wavelength random fiber laser based on fiber Bragg gratings. Photonics, 11 (8). pp. 1-10. ISSN 2304-6732

Azhar, Aisyah Alya Nureena and Abdul Manaf, Norhuda and Yabar, Helmut F. (2023) Artificial neural network model for palm oil biomass gasification process prediction. Chemical Engineering Transactions, 106 (NA). pp. 1237-1242. ISSN 2283-9216

Baharom, Bazilah and Sugimoto, Yoshiki and Bakar, Rohani and Kunio, Sakakibara and Nobuyoshi, Kikuma and Abd. Rahman, Nurul Huda (2023) 2 × 2 Lens array antenna using square-bottom concave-convex lens in 300-GHz band. IEEE Open Journal of Antennas and Propagation, 4 . pp. 1074-1086. ISSN 2637-6431

Batool, Uzma and Shapiai, Mohd. Ibrahim and Mostafa, Salama A. and Ibrahim, Mohd. Zamri (2023) An attention-augmented convolutional neural network with focal loss for mixed-type wafer defect classification. IEEE Access, 11 . pp. 108891-108905. ISSN 2169-3536

Bulya Nazim, Nur Julia Nazim and Abdullah, Mohd. Faizol and Mat Hussin, Mohd. Rofei and Mohamad Badaruddin, Siti Aishah and Hashim, Abdul Manaf (2023) Maximizing the thermal hotspot reduction by optimizing the thickness of multilayer hBN heat spreader. Materials Science in Semiconductor Processing, 158 (NA). NA. ISSN 1369-8001

Chang, Seong Hong and Tan, Sin Jin and Diblawe, Abdulkadir Mukhtar and Tiu, Zian Cheak and Cheng, Xiau San and Ahmad, Fauzan and Harun, Sulaiman Wadi (2023) Optical modulation in Er-doped fiber laser delivering dark pulse utilizing side polished fiber coated with Ti3AlC2 as saturable absorber. Materials Research Express, 10 (9). pp. 1-7. ISSN 2053-1591

Chong, Jun Wei Roy and Khoo, Kuan Shiong and Chew, Kit Wayne and Vo, Dai-Viet N and Balakrishnan, Deepanraj and Banat, Fawzi and Heli Siti Halimatul Munawaroh, Heli Siti Halimatul Munawaroh and Koji, Iwamoto and Show, Pau Loke (2023) Microalgae identification: Future of image processing and digital algorithm. Bioresource Technology, 369 (NA). NA-NA. ISSN 0960-8524

Choo, Hau Sim and Ooi, Chia Yee and Ismail, Nordinah and Inoue, Michiko and Kok, Chee Hoo (2023) Improving hardware trojan detection coverage by utilizing features at different abstraction levels. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 73-86. ISSN 2462-1943

Cimr, Dalibor and Busovsky, Damian and Fujita, Hamido and Studnicka, Filip and Cimler, Richard and Hayashi, Toshitaka (2023) Classification of health deterioration by geometric invariants. Computer Methods and Programs in Biomedicine, 239 (NA). pp. 1-9. ISSN 0169-2607

Cimr, Dalibor and Fujita, Hamido and Tomaskova, Hana and Cimler, Richard and Selamat, Ali (2023) Automatic seizure detection by convolutional neural networks with computational complexity analysis. Computer Methods and Programs in Biomedicine, 229 (NA). NA-NA. ISSN 0169-2607

Deng, Tingquan and Yang, Ge and Huang, Yang and Yang, Ming and Fujita, Hamido (2023) Adaptive multi-granularity sparse subspace clustering. Information Sciences, 642 (119143). NA-NA. ISSN 0020-0255

Dhamanti, Inge and Suwantika, Auliya A. and Adlia, Amirah and Yamani, Laura Navika and Yakub, Fitri (2023) Adverse reactions of COVID-19 vaccines: a scoping review of observational studies. International Journal of General Medicine, 16 (NA). pp. 609-618. ISSN 1178-7074

Dhamanti, Inge and Suwantika, Auliya A. and Adlia, Amirah and Yamani, Laura Navika and Yakub, Fitri (2023) Assessment of the potential of tidal range energy in Malaysian Exclusive Economic Zone (EEZ) using multi-mission satellite altimetry data. International Journal of General Medicine, 16 (NA). pp. 609-618. ISSN 1178-7074

Eissa, Noureldin and Khairuddin, Uswah and Yusof, Rubiyah and Ahmed Madani, Ahmed Madani (2023) A metaheuristic technique for cluster-based feature selection of DNA methylation data for cancer. Computers, Materials and Continua, 74 (2). pp. 2817-2838. ISSN 1546-2218

El-Saleh, Ayman A. and Alhammadi, Abdulraqeb and Shayea, Ibraheem and Hassan, Wan Haslina and Honnurvali, Mohamed Shaik and Daradkeh, Yousef Ibrahim (2023) Measurement analysis and performance evaluation of mobile broadband cellular networks In a populated city. Alexandria Engineering Journal, 66 (NA). pp. 927-946. ISSN 1110-0168

Fang, Jin and Guo, Xin and Liu, Yujia and Chang, Xiaokun and Fujita, Hamido and Wu, Jian (2023) An attention-based deep learning model for multi-horizon time series forecasting by considering periodic characteristic. Computers and Industrial Engineering, 185 (NA). NA-NA. ISSN 0360-8352

Fitriady, M. A. and Rahmat, N. A. and Mohammad, A. F. (2023) Vertical and spanwise wake flow structures of a single spire over smooth wall surface in a wind tunnel. Journal of Applied Fluid Mechanics, 16 (12). pp. 2459-2470. ISSN 1735-3572

Gorment, Nor Zakiah and Selamat, Ali and Cheng, Lim Kok and Krejcar, Ondrej (2023) Machine learning algorithm for malware detection: taxonomy, current challenges, and future directions. IEEE Access, 11 . pp. 141045-141089. ISSN 2169-3536

Grace Erlinda Harimisa, Grace Erlinda Harimisa and Che Jusoh, Nurfatehah Wahyuny and Tan, L. S. and Ghafar, N. A. (2023) Influence of furnace atmospheres and potassium hydroxide activation on the properties of bamboo activated carbon and its adsorption towards 4-nitrophenol. Chemical Engineering Research and Design, 198 (NA). pp. 325-339. ISSN 0263-8762

Halimi, Siti Nur Atiqah and Abdul Rahman, Mohd. Azizi and Mohammed Ariff, Mohd. Hatta and Abu Husain, Nurulakmar (2023) Monocular distance estimation-based approach using deep artificial neural network. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 107-119. ISSN 2462-1943

Halimi, Siti Nur Atiqah and Susijanto Tri Rasmana, Susijanto Tri Rasmana and Dimas Adiputra, Dimas Adiputra and Yahya, Wira Jazair and Abdul Rahman, Mohd. Azizi and Mohammed Ariff, Mohd. Hatta and Abu Husain, Nurulakmar and Abu Kassim, Khairil Anwar (2023) A review of safety test methods for new car assessment program in Southeast Asian countries. Open Engineering, 13 (1). pp. 1-16. ISSN 2391-5439

Harun, Aizul Nahar and Maspo, Nur Adib and Md. Issa, Nurhayati and Matsuura, Yoshiyuki and Chuprat, Suriayati and Mohd. Mahadzir, Akbariah and Haron, Nuzul Azam and Mohd. Nawi, Mohd Nasrun (2023) Automotive technology and patent assignee in Malaysia: an exploratory patent. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 417-432. ISSN 2462-1943

Harun, Mohamad Haniff and Abdullah, Shahrum Shah and Mohd. Aras, Mohd. Shahrieel and Bahar, Mohd. Bazli and Ali, Fariz (2023) 3D collision avoidance system for unmanned aerial vehicle (UAV) with decentralized approach. IIUM Engineering Journal, 24 (2). pp. 373-390. ISSN 1511-788X

Hashim, Hasnatul Azwani and Jamian, Nor Ruwaida and Yusuf, Sara Yasina and Dewika Naidu, Dewika Naidu and Mohd. Paad, Khairunnisa and Ishak, Nur Fatiha (2023) Evaluation of deposited atmospheric microplastic characteristic within Malaysia cities airshed. Chemical Engineering Transactions, 106 (NA). pp. 1105-1110. ISSN 2283-9216

Hayashi, Toshitaka and Cimr, Dalibor and Fujita, Hamido and Cimler, Richard (2023) Image entropy equalization: a novel preprocessing technique for image recognition tasks. Information Sciences, 647 (119539). NA-NA. ISSN 0020-0255

Hong, Chua Kiang and Abu, Mohd. Azlan and Shapiai, Mohd. Ibrahim and Haniff, Mohamad Fadzli and Mohamad, Radhir Sham and Abu, Aminudin (2023) Analysis of wind speed prediction using artificial neural network and multiple linear regression model using tinyml on Esp32. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 107 (1). pp. 29-44. ISSN 2289-7879

Hong, Chungpyo and Katanoda, Hiroshi and Asako, Yutaka and Faghri, Mohammad (2023) Temperature recovery factor for gaseous nitrogen flow in a microtube. International Journal of Heat and Mass Transfer, 202 (123688). pp. 1-23. ISSN 0017-9310

Ilmasari, Dhaneswara and Yuniarto, Adhi and Khen, Chanlyda and Purba, Laila Dina Amalia and Lei, Zhongfang and Yuzir, Ali (2023) Microalgal-bacterial aerobic granular sludge for old leachate treatment: development, performance, and lipid production. Journal of Cleaner Production, 417 (138053). NA-NA. ISSN 0959-6526

Ilmiawan, Fakhrizal Akbar and Zaki, Sheikh Ahmad (2023) Application of flywheel energy storage on generator-set. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 78-87. ISSN 2289-7879

Iqbal, Muhammad Saqib and Abdul Rahim, Zulhasni (2023) Understanding the potential of hydrogen as a game-changing energy source. Chemical Engineering and Technology, 46 (12). pp. 2577-2582. ISSN 0930-7516

Iqbal, Muhammad Saqib and Abdul Rahim, Zulhasni and Ohshima, Naoki (2023) Enhancing workforce performance and applications toward industry 5.0 with the 5G conceptual framework in Malaysia. Journal of Advanced Research in Applied Sciences and Engineering Technology, 31 (3). pp. 282-289. ISSN 2462-1943

Jaafar, Afiza Nur and Ja'afar, Hajar and Yamada, Yoshihide and Sadeghikia, Fatemeh and Ibrahim, Idnin Pasya and Mahmood, Mohd. Khairil Adzhar (2023) Design of an axial mode helical antenna with buffer layer for underwater applications. International Journal of Electrical and Computer Engineering, 13 (1). pp. 473-482. ISSN 2088-8708

Johar, Farah Ain and Mohamad, Shaza Eva and Koji, Iwamoto and Suzuki, Iwane and Yoshiaki, Maeda (2023) Effect of pre-treatment for lipid extraction from Tisochrysis lutea (T-iso). Chemical Engineering Transactions, 106 (NA). pp. 1177-1182. ISSN 2283-9216

Kamarudin, Mohd. Hider and Ismail, Zool Hilmi and Saidi, Noor Baity and Hanada, Kousuke (2023) An augmented attention-based lightweight CNN model for plant water stress detection. Applied Intelligence, 53 (18). pp. 20828-20843. ISSN 0924-669X

Kamaruzaman, Ahmad Fitry and Ahmad Tarmizi, Zatil Izzah (2023) Acceptance of the low carbon initiatives in the local government project implementation in Malaysia. Chemical Engineering Transactions, 106 (NA). pp. 1243-1248. ISSN 2283-9216

Kamaruzaman, Nursyuhada' and Abdul Manaf, Norhuda and Milani, Dia and Abbas, Ali (2023) Assessing the current state of biomass gasification technology in advancing circular economies: A holistic analysis from techno-economic-policy perspective in Malaysia and beyond. Chemical Engineering Research and Design, 199 (NA). pp. 593-619. ISSN 0263-8762

Kamaruzaman, Nursyuhada’ and Abdul Manaf, Norhuda (2023) Digitalization of biomass gasification plant in capturing and translating the technical and economic uncertainties – A review. Chemical Engineering Transactions, 106 (NA). pp. 1369-1374. ISSN 2283-9216

Kamis, Shahira Liza and Mat Tahir, Noor Ayuma and Yaakob, Yazid and Md. Ghazazi, Nur Afieqah (2023) Surface refinement of aluminium oxide by carbon-based reinforcement. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 28-40. ISSN 2289-7895

Kar, Fei Chan and Mohd. Zaid, Mohd. Hafiz and Mamat, Md. Shuhazlly and Tanemura, Masaki and Miyazaki, Hidetoshi and Kamis, Shahira Liza and Maruyama, Takahiro and Sako, Katsuya and Sharma, Kamal Prasad and Osman, Nurul Huda and Mazu, Nurul Najiha and Yaakob, Yazid (2023) Simultaneously improved surface hardness and thermal diffusivity of carbon nanotube/zinc silicate composites via colloidal processing. Materials Chemistry and Physics, 309 (NA). NA. ISSN 0254-0584

Khandakar, Amith and Chowdhury, Muhammad E. H. and Ibne Reaz, Mamun and Kiranyaz, Serkan and Hasan, Anwarul and Rahman, Tawsifur and Md. Ali, Sawal Hamid and Shapiai At. Abd. Razak,, Mohd. Ibrahim and A. Bakar, Ahmad Ashrif and Podder, Kanchon Kanti and Chowdhury, Moajjem Hossain and Faisal, Md. Ahasan Atick (2023) DSPnet: a self-onn model for robust DSPN diagnosis from temperature maps. IEEE Sensors Journal, 23 (5). pp. 5370-5381. ISSN 1530-437X

Kong, Leangkim and Anuar, Aznah N. and M.Yuzir, Ali and C. Ros, Faizah and Said, Nur F. and Asanuma, Jun (2023) Impact of earthquake on river water quality parameters. Chemical Engineering Transactions, 106 (NA). pp. 1171-1176. ISSN 2283-9216

Krishnan, S. A. Gokula and Gumpu, Manju Bhargavi and Arthanareeswaran, G. and Goh, P. S. and Aziz, F. and Ismail, A. F. (2023) Electrochemical quantification of atrazine-fulvic acid and removal through bismuth tungstate photocatalytic hybrid membranes. Chemosphere, 31 (NA). NA-NA. ISSN 10045-6535

Lee, Yan Kang and Liew, Chia Pao and Kiew, Peck Loo and Foo, Braedan Chuan Yi and Yeoh, Wei Ming and Ho, Mui Yen (2023) Orange peel-derived activated carbon as a potential electrode material for supercapacitor application. Chemical Engineering Transactions, 106 (NA). pp. 1285-1290. ISSN 2283-9216

Lee, Yit Kwan and Yeap, Swee Pin and Sum, Jing Yao and Abu Bakar, yu Haslija and Tan, Lian See and Abbas Jawad, Zeinab (2023) Immobilization of NanoFe3O4 onto fabric material through in situ co-precipitation as a flexible catalyst for humic acid degradation. Chemical Engineering Transactions, 106 (NA). pp. 1009-1014. ISSN 2283-9216

Loh, Zhi Wei and Mohd. Zaid, Mohd. Hafiz and Matori, Khamirul Amin and Awang Kechik, Mohd. Mustafa and Fen, Yap Wing and Mayzan, Mohd. Zul Hilmi and Shahira Liza, Shahira Liza and Cheong, Wei Mun (2023) Phase transformation and mechanical properties of new bioactive glass-ceramics derived from Cao–P2O5–Na2O–B2O3–Sio2 glass system. Journal of the Mechanical Behavior of Biomedical Materials, 143 (NA). pp. 1-11. ISSN 1751-6161

Lye, An Jie and Liew, Peng Yen and Mohd. Fadzil, Hidayah and Foong, Chan Choong (2023) Effect of emotional intelligence and demographic characteristics on psychological capital among chemical engineering students. Journal of Chemical Education, 100 (2). pp. 479-488. ISSN 0021-9584

Lye, An Jie and Mohd. Fadzil, Hidayah and Foong, Chan Choong and Liew, Peng Yen (2023) Modification and validation of a questionnaire for measuring the psychological capital of engineering students. Chemical Engineering Transactions, 106 (NA). pp. 997-1002. ISSN 2283-9216

M'hamed Beriache, M'hamed Beriache and Cherki, Brahim Hicham and Mokhtar Saidia, Leila and Che Sidik, Nor Azwadi and Rizalman, Mamat (2023) Heat transfer enhancement through different heat sink/impinging air jet parameters an experimental approach. Mechanika, 29 (1). pp. 27-33. ISSN 1392-1207

M. Aris, Alijah and Yuzir, Ali M. and Anuar, Aznah N. and Hara, Hirofumi (2023) Identification of facultative anaerobic bacteria for low-cost nutrient removal in treating domestic wastewater. Chemical Engineering Transactions, 106 (NA). pp. 1201-1206. ISSN 2283-9216

M. Dewika, M. Dewika and Markandan, Kalaimani and Ahmad Irfan, N. and Mohd. Abdah, Muhammad Amirul Aizat and Jamian, Nor Ruwaida and Y. Y., Sara and Mohammad Khalid, Mohammad Khalid (2023) Review of microplastics in the indoor environment: Distribution, human exposure and potential health impacts. Chemosphere, 324 (NA). NA-NA. ISSN 0045-6535

M. Kassim, Norazah and Anuar, Aznah N. and Sharani, Noor A. and M. Aris, Alijah and Khor, Bee C. (2023) Aerobic sludge granulation process in a 4-h sequencing batch reactor for treating low strength wastewater. Chemical Engineering Transactions, 106 (NA). pp. 1153-1158. ISSN 2283-9216

M. Rasid, Nur I. and Md. Akhir, Fazrena Nadia and Abd. Aziz, Azila and Iwane, Suzuki and Shinya, Takahashi (2023) Bioactive compound potential of brassicaceae sprouts and the effect of UV-B radiation on their antioxidant activity. Chemical Engineering Transactions, 106 (NA). pp. 1261-1266. ISSN 2283-9216

Madkour, Dina M. and Shapiai, Mohd. Ibrahim and Mohamad, Shaza Eva and Aly, Hesham Hamdy and Ismail, Zool Hilmi and Ibrahim, Mohd. Zamri (2023) A systematic review of deep learning microalgae classification and detection. IEEE Access, 11 . pp. 57529-57555. ISSN 2169-3536

Mansor, Muliani and Budiman, Siti Noorleila and Mohd. Paad, Khairunnisa and Surib, Nur Atiqah and Mohd. Zainoodin, Azran (2023) Physicochemical characterization of candle soot functionalized with nitric acid. Chemical Engineering Transactions, 106 (NA). pp. 1135-1140. ISSN 2283-9216

Maresova, Petra and Krejcar, Ondrej and Maskuriy, Raihan and Abu Bakar, Nor Azlina and Selamat, Ali and Truhlarova, Zuzana and Horak, Jiri and Joukl, Miroslav and Vítkova, Lucie (2023) Challenges and opportunity in mobility among older adults - key determinant identification. BMC Geriatrics, 23 (1). pp. 1-29. ISSN 1471-2318

Masturina Nazurah, Masturina Nazurah and Shaffiei, Zatul Amilah and Daud, Nor Aziah and Ahmad, Nor Diana and Shaffiei, Zatul Alwani (2023) Healthyheart data visualization: predicting heart condition using machine learning. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 41-57. ISSN 2289-7895

Md. Mansor, Mohamad Naqiuddin and Tasnim, Rahayu and Alias, Roslinda and Mohd. Norman, Abdullah Muaz and Dasiman, Razif (2023) Disabled but determined: challenges faced by entrepreneurs in Selangor, Malaysia during the COVID-19 pandemic. Malaysian Journal of Public Health Medicine, 23 (1). pp. 65-71. ISSN 1675-0306

Meraj, Aatikah and Jawaid, M. and Singh, Surendra Pratap and Nasef, Mohamed Mahmoud and Ariffin, Hidayah and Haafiz, M.K. Mohamad (2023) Effect of natural deep eutectic solvents on properties of micro crystalline cellulose isolated from kenaf fibre. Industrial Crops and Products, 203 (117129). ISSN 0926-6690

Mohamad Rashid, Nur Nadhirah and Ahmad, Harith and Ismail, Mohammad Faizal and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Yahaya, Hafizal and Nordin, Nur Azmah and Wan Nawawi, Wan Mohd. Fazli and Ahmad, Fauzan (2023) Nanotubes in chitin mode locker for passive mode-locked fibre laser in 2.0 µm region. Photonics, 10 (3). pp. 1-14. ISSN 2304-6732

Mohamad Rashid, Nur Nadhirah and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Nordin, Nur Azmah and Yahaya, Hafizal and Ismail, Mohammad Faizal and Ahmad, Harith and Wan Nawawi, Wan Mohd Fazli and Ahmad, Fauzan (2023) Passively Q-switched erbium-doped fibre laser based on graphene-chitin saturable absorber. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 44-52. ISSN 2462-1943

Mohamed Shoani, Mohamed Shoani and Ribuan, Mohamed Najib and Mohd. Faudzi, Ahmad Athif and Mohamaddan, Shahrol (2023) Reducing actuators in soft continuum robots and manipulators. Applied Sciences (Switzerland), 13 (1). pp. 1-13. ISSN 2076-3417

Mohammad Arafat, Mohammad Arafat and Ishak, Izuan Amin and Mohammad, Ahmad Faiz and Khalid, Amir and Mohmad Jaát, Md. Norrizam and Yasak, Mohd. Fuad (2023) Effect of Reynolds number on the wake of a next-generation high-speed train using CFD analysis. CFD Letters, 15 (1). pp. 76-87. ISSN 2180-1363

Mohanadas, Hemanth Ponnambalath and Nair, Vivek and Abbas, Akbar and Mohd. Faudzi, Ahmad Athif and Tucker, Nick and Ismail, Ahmad Fauzi and Ramakrishna, Seeram and Saidin, Syafiqah and Jaganathan, Saravana Kumar (2023) A systematic analysis of additive manufacturing techniques in the bioengineering of in vitro cardiovascular models. Annals of Biomedical Engineering, 51 (11). pp. 2365-2383. ISSN 0090-6964

Mohd. Halim, Siti Nabilah and Mohamad Taib, Mohamad Fariz and Zuikafly, Siti Nur Fatin and Sapingi, Husni Hani Jameela and Mat Ali, Mohamed Sukri and Yahaya, Hafizal and Ahmad, Fauzan (2023) Ab-Initio and experimental study of the electronic and optical properties of layered 2D molybdenum disulphide. Journal of Advanced Research in Applied Mechanics, 107 (1). pp. 11-19. ISSN 2289-7895

Mohd. Hami, Siddratul Sarah and Nor Affandi, Nor Dalila and Mohd., Ahmad Faiza and Harun, Ahmad Mukifza and Abdul Rahman, Mohd. Azizi and Indrie, Liliana and Ahmad, Mohd. Rozi (2023) The effects of different concentrations of nanoclay in polyvinyl alcohol (PVA) nanofibres-polyester bilayer on morphological structure, mechanical properties, and filtration of direct red dye. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 359-367. ISSN 2462-1943

Mohd. Mokhtar, Mohamad Aizad and Rasit Ali, Roshafima and Lei, Zhongfang and Che Jusoh, Nurfatehah Wahyuny and Ahmad Tarmizi, Zatil Izzah (2023) Efficiency of low-Ag-content biosynthesized ZnO/Ag on photodegradation of paracetamol. Chemical Engineering Transactions, 106 (NA). pp. 1051-1056. ISSN 2283-9216

Mohd. Noor Shah, Nurul Fathihin and Azmi, Riswadi and Ghazali, Masitah and Othman, Nur Zuraifah Syazrah (2023) Users experience perspective in exploring an ancient manuscript using augmented reality application. International Journal of Innovative Computing, Information and Control, 19 (6). pp. 1679-1695. ISSN 1349-4198

Mohd. Razali, Nazirah and Yahaya, Hafizal and Lokman, Muhammad Quisar and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan (2023) Simulation of trenched coreless silica fiber sensor for refractive index measurement. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 87-94. ISSN 2462-1943

Mohd. Shadzalli, Z. F. and Kamaruzaman, N. and Abdul Manaf, N. (2023) Flexible feedstock analysis of biomass gasification process for carbon-negative energy technology via aspen plus simulation. ASM Science Journal, 18 (NA). pp. 1-6. ISSN 1823-6782

Mohd. Sobran, Nur Maisarah and Ismail, Zool Hilmi (2023) A systematic literature review of unsupervised fault detection approach for complex engineering system. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 43-60. ISSN 2289-7895

Mohd. Yusuf, Shahir and Mazlan, Nurainaa and Musa, Nur Hidayah and Zhao, Xiao and Chen, Ying and Yang, Shoufeng and Nordin, Nur Azmah and Mazlan, Saiful Amri and Gao, Nong (2023) Microstructures and hardening mechanisms of a 316L stainless steel/Inconel 718 interface additively manufactured by multi-material selective laser melting. Metals, 13 (2). pp. 1-21. ISSN 2075-4701

Muhammad Nasir, Mohd. Nizar and Mohd. Nordin, Ili Najaa Aimi and Mohd. Faudzi, Ahmad Athif and Muftah, Mohamed Naji and Mhd. Yusoff, Mohd. Akmal and Mohamaddan, Shahrol (2023) Modeling and position control of fiber braided bending actuator using embedded system. Applied Sciences (Switzerland), 13 (5). pp. 1-15. ISSN 2076-3417

Muhsin, M. and Kamardin, Kamilia and Yamada, Yoshihide (2023) Focal region ray tracing of conventional and shaped lens antenna. International Journal of Integrated Engineering, 15 (3). pp. 131-139. ISSN 2229-838X

Murshida, Ghulam and Al-Khayaria, Shaima and Tan, Lian See (2023) Measurement of carbon dioxide (CO2) absorptive capacity in a secondary amine based aqueous mixture: Experimental and modelling study. Chemical Engineering Transactions, 106 (NA). pp. 979-984. ISSN 2283-9216

Musa, Zulkifli and Ibrahim, Zuwairie and Shapiai, Mohd. Ibrahim and Tsuboi, Yusei (2023) Cubature kalman optimizer: A novel metaheuristic algorithm for solving numerical optimization problems. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 333-355. ISSN 2462-1943

Musthafa, Kawther M. and Musthafa, Azura and Musthafa, xOoi Wei and Rosol, Ahmad Haziq Aiman and Mohamed, Norliza and Mafroos, Mahroof Mohamed and Harun, Sulaiman (2023) Synthesisation, fabrication, and incorporation techniques of max phase and mxene saturable absorber in passively q-switched and mode-locked all-fibre laser cavities: a review. Journal of Advanced Research in Applied Sciences and Engineering TechnologyOpen AccessVolume 32, Issue 2, Pages 119 - 141October 2023, 32 (2). pp. 119-141. ISSN 2462-1943

Ngui, Wai Keng and Leong, Mohd. Salman and Shapiai, Mohd. Ibrahim and Lim, Meng Hee (2023) Blade fault localization with the use of vibration signals through artificial neural network: a data-driven approach. Pertanika Journal of Science and Technology, 31 (1). pp. 51-68. ISSN 0128-7680

Nguyen, Hoang Ly and Nguyen, Binh Nguyen and Huynh, Nhu Tran and Thi Thuy, Hang Hoang and Joo, Sang-Woo and Vasseghian, Yasser and Kamyab, Hesam and Chelliapan, Shreeshivadasan and Jirí, Jaromír Klemeš (2023) Metal-organic framework nanopesticide carrier for accurate pesticide delivery and decrement of groundwater pollution. Journal of Cleaner Production, 402 (136809). NA-NA. ISSN 0959-6526

Nugroho, Rizki Susetyo and Bahiuddin, Irfan and Prabakara, Hafizh Arsa and Chazim, Ryandhi Rofifu and Leman, Zulkarnain Ali and Mohammed Ariff, Mohd. Hatta (2023) A dynamic modelling of forklift hydraulic actuator internal leakage using bond graph method. International Journal of Heavy Vehicle Systems, 30 (3). pp. 380-399. ISSN 1744-232X

Nurul Izzati, Nurul Izzati and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Rijal, Hom Bahadur and Ardila Rey, Jorge Alfredo and Hagishima, Aya and Nurizzatul Atikha, Nurizzatul Atikha (2023) Investigation of thermal adaptation and development of an adaptive model under various cooling temperature settings for students' activity rooms in a university building in Malaysia. Buildings, 13 (1). pp. 1-25. ISSN 2075-5309

Omar, Nurizan and Abdullah, Ezzat Chan and Aaron Petrus, Ashley and Mubarak, Nabisab Mujawar and Mohammad Khalid, Mohammad Khalid and Agudosi, Elochukwu Stephen and Numan, Arshid and Aid, Siti Rahmah (2023) Single-route synthesis of binary metal oxide loaded coconut shell and watermelon rind biochar: Characterizations and cyclic voltammetry analysis. Biomass Conversion and Biorefinery, 13 (3). pp. 2279-2291. ISSN 2190-6815

Othman, Intan Sharhida and Munawar, Rose Farahiyan and Jun, Liew Pay and Abd. Razak, Jeefferie and Suandi, Syahrul Azwan Sundi and Mohamad Zin, Mohd. Rody and Kamis, Shahira Liza and Ahsan, Qumrul (2023) Wear scar characteristics of thermal power plant waste reinforced nickel matrix composite coatings. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 21-31. ISSN 2289-7895

Phuang, Zhen Xin and Woon, Kok Sin and Mong, Guo Ren and Mohd. Hanafiah, Marlia and Liew, Peng Yen (2023) Assessing plastic waste green economy management via integrated life cycle environmental and costing framework. Chemical Engineering Transactions, 106 (NA). pp. 109-114. ISSN 2283-9216

Raja Azam Shah, Raja Nur Atikah and Mohd. Redzuan, Farah Liana and Zaki, Sheikh Ahmad and Mohammad, Ahmad Faiz and Mohammad, xFitri (2023) A review on thermoelectric generators: structural optimization and economic analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 99-114. ISSN 2289-7879

Roslan, Shairatul Akma and Yakub, Fitri and Rambat, Shuib and Munawwarah, Sharifah and Saidin, Mokhtar and Liana, Farah and Mohd. Maruai, Nurshafinaz and Mat Ali, Mohamed Sukri and Mohammad, Ahmad Faiz (2023) The novel method in validating the spectral wavelength optimization to determine archaeological proxies by the integration of aerial and ground platforms. Journal of Advanced Research in Applied Mechanics, 108 (1). pp. 1-15. ISSN 2289-7895

Roslan, Siti Amni Husna and Rasid, Zainudin A. and Ariffin, Ahmad Kamal (2023) Extended blade element momentum theory for the design of small-scale wind turbines. Journal of Advanced Research in Applied Mechanics, 101 (1). pp. 62-75. ISSN 2289-7895

Sahat, Nur Shakira and Mohd. Jusoh, Yanti Maslina and Hashim, Zanariah and Muhamad, Ida Idayu and Dailin, Daniel Joe and Zainol, Noorazwani and Aman Nor, Farahiyah and Mohd. Kassim, Angzzas Sari and Abang Zaidel, Dayang Norulfairuz (2023) Physicochemical properties and crystallisation behaviour of fat blends for a margarine formulation. Chemical Engineering Transactions, 106 (NA). pp. 1039-1044. ISSN 2283-9216

Saidin, Hamidi and Abd. Razak, Azli and Mohamad, Mohd. Faizal and Ul-Saufie, Ahmad Zia and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Othman, Nor’azizi (2023) Hazard evaluation of indoor air quality in bank offices. Buildings, 13 (3). pp. 1-18. ISSN 2075-5309

Salameh, Anas A. and Abu-AlSondos, Ibrahim A. and Abu, Noor Hidayah and Harun, Aizul Nahar (2023) Current knowledge and future possibilities of medical digital technologies based on mobile health. International Journal of Interactive Mobile Technologies, 17 (17). pp. 134-147. ISSN 1865-7923

Sasmitha Aulia Zahra, Sasmitha Aulia Zahra and Purba, Laila Dina Amalia and Abdullah, Norhayati and Yuzir, Ali and Koji, Iwamoto and Lei, Zhongfang and Joni Hermana, Joni Hermana (2023) Characteristics of algal-bacterial aerobic granular sludge treating real wastewater: effects of algal inoculation and alginate-like exopolymers recovery. Chemosphere, 329 (NA). NA-NA. ISSN 0045-6535

Selamat, Hazlina and Haniff, Mohamad Fadzli and Abu, Aminudin and Abu, Mohd. Azlan and Mohamad, Radhir Sham and Azizuddin, Muhammad Nur Azam (2023) Development of web-based IoT comfort index and electricity consumption estimation monitoring microcontroller system with wireless sensor modules for air-conditioning system. Journal of Advanced Research in Applied Mechanics, 104 (1). pp. 12-24. ISSN 2289-7895

Selamat, Hazlina and Islam, Tahmida and Haniff, Mohamad Fadzli and Alimin, Ahmad Jais (2023) Design and implementation of hybrid exoskeleton for oil palm harvester to reduce muscle strain. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 1-11. ISSN 2289-7895

Shaffiei, Zatul Alwani and Amir Hamzah, Amir Syafiq Syamin Syah and Rashid, Shaikh Mariyam Harunor and Oshima, Naoki (2023) Role of text mining in extracting valuable information from text data. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 263-271. ISSN 2462-1943

Shafie, N. F. A. and Hamzah, M. Y. and Ali, R. R. (2023) Tuneable poly(N-Isopropyl acrylamide)-based thermo-responsive nanogels: a review on polymerisation method. International Journal of Nanotechnology, 11 (12). pp. 917-935. ISSN 1475-7435

Shaharuddin, Shanahs and Abdollah, Mohd. Fadzli and Amiruddin, Hilmi and Kamis, Shahira Liza and Ramli, Faiz Redza (2023) Applied normal load and printing layer thickness relationship on the tribological properties of novel 3D-printed PLA-PCU polymer blend. Jurnal Tribologi, 39 (NA). pp. 1-16. ISSN 2289-7232

Shahdan, Nadhilah Aqilah and Balasundram, Vekes and Ibrahim, Norazana and Isha, Ruzinah (2023) Thermogravimetric and kinetic studies on pyrolysis of empty fruit bunch over metal-impregnated rice husk ash catalysts. Biomass Conversion and Biorefinery, 13 (18). pp. 16441-16451. ISSN 2190-6815

Shamsudin, Nur Hazahsha and Shafie, S. and Ab. Kadir, Mohd. Zainal Abidin and Ahmad, Fauzan and Sulaiman, Yusran and Mohd. Chachuli, Siti Amaniah and Che Razali, Mashitah (2023) Flexible back-illuminated dye sensitised solar cells (DSSCs) with titanium dioxide/silver nanoparticles composite photoanode for improvement of power conversion efficiency. Optik, 272 (NA). NA. ISSN 0030-4026

Sithambaranathan, Paveswari and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Abbasi, Amin and Ting, T. M. (2023) Composite proton-conducting membrane with enhanced phosphoric acid doping of basic films radiochemically grafted with binary vinyl heterocyclic monomer mixtures. Membranes, 13 (1). pp. 1-20. ISSN 2077-0375

Surib, Nur Atiqah and M. P., Khairunnisa and I. Wuled Lenggoro, I. Wuled Lenggoro and Kamis, Shahira Liza and Wong, Yew Hoong (2023) Conductive particulate films fabricated by electrospray deposition of candle soot suspensions with acid treatment. Advanced Powder Technology, 34 (9). NA-NA. ISSN 0921-8831

Tan, Chen Tung and Khairuddin, Uswah and Shapiai, Mohd. Ibrahim and Md. Nor, Norhariani and Wen, Mark Han Hiew and Mohd. Suhaimie, Nurul Aisyah (2023) Calf posture recognition using convolutional neural network. Computers, Materials and Continua, 74 (1). pp. 1493-1508. ISSN 1546-2218

Tan, Kai Wen and Liew, Peng Yen and Gan, Cheng Ling and Woon, Kok Sin and Mohammad Rozali, Nor Erniza and Ho, Wai Shin (2023) Peer-to-peer trading for multi-utility energy systems in Eco- industrial park. Chemical Engineering Transactions, 103 (NA). pp. 823-828. ISSN 2283-9216

Tanavarotai, Karn and Nor Anuar, Aznah and Yuzir, Ali and Ab. Halim, Mohd. Hakim and Mohd. Aris, Alijah and Khor, Bee Chin and Lei, Zhongfang and Yuniarto, Adhi (2023) The storage of dried aerobic granular sludges under ambient condition. Journal of Cleaner Production, 383 (135401). NA-NA. ISSN 0959-6526

Tasin, Muhammad Asyraf and Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Johari, Mohd. Aidy Faizal and Nordin, Nur Azmah and Mohd. Yusuf, Shahir Yasin and Choi, Seung Bok and Irfan Bahiuddin, Irfan Bahiuddin (2023) Magnetostriction enhancement in midrange modulus magnetorheological elastomers for sensor applications. Micromachines, 14 (4). pp. 1-15. ISSN 2072-666X

Tsuji, Tomoya and Kiew, Peck Loo and Matsukawa, Hiroaki and Hoshina, Taka Aki and Otake, Katsuto (2023) Measurements and correlation of saturated vapor pressure of a new sulfur-free odorant for liquefied petroleum gas, 2-Hexyne, and bubble point pressure for three binaries, Ehtane-2-Hexyne, Propane-2-Hexyne, and Butane-2-Hexyne. Journal of the Japan Petroleum Institute, 66 (3). pp. 69-80. ISSN 1346-8804

Wan Aina Syahirah, Wan Abdullah and Mardhiah, Wahab and Zeyu, Yang and Itoi, Kazane and Torimaru, Sumire and Abdul Manaf, Norhuda (2023) A reality check on the large scale of solar energy technology via integrated SWOT-PESTLE-AHP analysis. Chemical Engineering Transactions, 106 (NA). pp. 511-516. ISSN 2283-9216

Wu, Xuemei and He, Jie and Huang, Qionghao and Huang, Changqin and Zhu, Jia and Huang, Xiaodi and Fujita, Hamido (2023) FER-CHC: Facial expression recognition with cross-hierarchy contrast. Applied Soft Computing, 145 (NA). NA-NA. ISSN 1568-4946

Xin Lai, Andrea Jia and Tsuji, Tomoya and Tochigi, Katsumi and Tan, Lian See and Matsuda, Hiroyuki and Kurihara, Kiyofumi (2023) Prediction of phase equilibria and transport properties using ASOG and PRASOG group contribution methods: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (2). pp. 66-80. ISSN 2289-7879

Yee, Lai Kok and Mohd. Yusoff, Muhammad Syahmi and Ken, Tan Lit and Asako, Yutaka and Quen, Lee Kee and Kang, Hooi-Siang and Siang, Gan Yee and Chuan, Zun-Liang and Tey, Wah Yen and Zahari, Abdul Muhaimin and Hoo, Kok Chee (2023) Velocity analysis on moving objects detection using multi-scale histogram of oriented gradient. Journal of Advanced Research in Applied Mechanics, 109 (1). pp. 35-43. ISSN 2289-7895

Yusuf, Yusnita and Shafie, Suhaidi and Ismail, Ismayadi and Ahmad, Fauzan and Hamidon, Mohd. Nizar and Sudhir, Pandey Shyam and Wei, Lei (2023) Highly conductive graphenated-carbon nanotubes sheet with graphene foliates for counter electrode application in dye-sensitized solar cells. Pertanika Journal of Science and Technology, 31 (3). pp. 1325-1333. ISSN 0128-7680

Zak, Ali Khorsand and Hashim, Abdul Manaf (2023) Synthesis, characterization and cytotoxicity studies of Au-decorated graphene oxide nanosheets. Ceramics International, 49 (11). pp. 18577-18583. ISSN 0272-8842

Zhou, Mi and Zhou, Ya-Jing and Liu, Xin-Bao and Wu, Jian and Fujita, Hamido and Herrera-Viedma, Enrique (2023) An adaptive two-stage consensus reaching process based on heterogeneous judgments and social relations for large-scale group decision making. Information Sciences, 644 (119280). NA-NA. ISSN 0020-0255

Zuikafly, Siti Nur Fatin and Ahmad, Harith and Ismail, Mohd. Faizal and Abdul Rahman, Mohd. Azizi and Yahya, Wira Jazair and Abu Husain, Nurulakmar and Abu Kassim, Khairil Anwar and Yahaya, Hafizal and Ahmad, Fauzan (2023) Dual regime mode-locked and Q-switched erbium-doped fiber laser by employing graphene filament-chitin film-based passive saturable absorber. Micromachines, 14 (5). pp. 1-17. ISSN 2072-666X

Zulkifli, Nur Aszreen and Shahira Liza, Shahira Liza and Hiroki, Akasaka and Kanao, Fukuda and Mohd. Rawian, Nur Adilah and Md. Ghazazi, Nur Afieqah and Mat Tahir, Noor Ayuma and Yaakob, Yazid (2023) Surface and tribology characterization of diamond-like carbon flakes reinforced oxide film by pulse anodizing. Ceramics International, 49 (21). pp. 34205-34222. ISSN 0272-8842