Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2003

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | C | D | E | H | I | J | L | M | N | O | P | Q | R | S | T | V | W | Y | Z
Number of items: 134.

A

A. Khalil, Ehab and Khalid, Marzuki and Kekre, H. B. (2003) A switch node architechture for multimedia environment. In: IEEE TENCON '03, 2003.

A. Wahab, A. and Nadzri, M.F. (2003) The study of induced velocity on helicopter main rotor blade. In: Simposium Kebangsaan Sains dan Technologi, 2003, Pan Pacific Glenmarie, Kuala Lumpur.

A. Wahab, A. and Nor, M. Z. M. and Tan, M. T. and Ismai, M. H. (2003) The design of high-lift foldable wing for low take off speed seaplane. In: Simposium Kebangsaan Sains dan Technologi, 2003, Pan Pacific Glenmarie, Kuala Lumpur.

A. Wahab, A. and Shamsuddin, R. A. and Halim, M. A. A. and Won, Y. S. (2003) motorised atomiser for aerial crop spraying using microlight. In: Simposium Kebangsaan Sains dan Technologi, 2003, Pan Pacific Glenmarie, Kuala Lumpur.

Abd. Jalil, M. Kasim and C. K., Kong and H. S., Kang (2003) Development of virtual reality based driving simulator. In: Proceedings Of The 7th Southeast Asian Ergonomic Society and 4th Malaysian Ergonomic Conference Malaysia, 2003, Kuching, Sarawak.

Abd. Kader, Ab. Saman and Ramasamy, Arulmaran (2003) Integrated inland water transportation system for Klang Valley. In: Malaysian Science And Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abd. Kader, Ab. Saman (2003) Freshwater management in relation to inland water transport activies. In: International Freshwater Management Conference And Exhibition, 2003, Kuching, Sarawak.

Abd. Rahman, Roslan and Zubair, Mazlan and Amin, Norsham (2003) Finite element modeling, correlation and model updating of stiffened plate. Jurnal Mekanikal (16). pp. 91-106. ISSN 0127-3396

Abd. Wahab, Abas and Jungan, Jawan and Songip, Ahmad Rahman (2003) Capacity building in aeronatics. In: National Sympossium on Science and Technology , 2003, Palace of the golden Horses, The Mines Resort City. Selangor.

Abd.Rahim, Abd.Rahman and Nabi Baksh, Mohd Shariff (2003) Critical succes factors and conceptual framework for new product development for engineer to order company. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Abdul Aziz, Azhar and Mohd. Nasir, Zakaria and Mat Yamin, Ahmad Kamal (2003) Compound-Piston, two-stroke multi-cylinder (500cc) lean burn engine. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Abdul Rahim, Abd. Rahman and Nabi Baksh, Mohd. Shariff (2003) Case study method for new product development in engineer to order organisations. Work Study, 52 (1). pp. 25-36. ISSN 0043-8022

Abdul Rani, Mat Rebi (2003) Managing ergonomics reisk factors at workplace. In: 6th National Conference & Exhibition On Occupational Safety & Health, 2003, China National Convention Center (CNCC).

Abdul Rani, Mat Rebi (2003) Roles of the mangement and safety committee in the implementation of safety management system in industries. In: Seminar On Occupational Safety & Health, 2003, Hotel Selesa. Pasir Gudang, Johor.

Abdul Talib, Hayati and Jamaludin, Khairur Rijal (2003) Aplikasi teknologi maklumat (IT) dalam pengurusan organisasi : sorotan kajian. Jurnal teknikal dan kajian sosial, 1 (2). pp. 89-105. ISSN 1675-2228

Abdullah, Hayati and Mohd. Jaafar, Mohammad Nazri, and Ani, Farid Nasir (2003) Low emission incinerator by staged combustion. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Abu, Risal and Md. Tap, Masine (2003) Automatic feature recognition for machining features. In: 3rd International Conference On Advenced Manufacturing Technology, 2003, Kuala Lumpur.

Abu Bakar, A R. and OUYANG, H and Cao, Q (2003) Interface pressure distributions through structural modifications. SAE 2003 Transactions, Journal of Passenger Cars: Mechanical Systems , Vol. 1 (No. 6). pp. 2387-2392.

Abu Bakar, Rosli (2003) Preliminary design of digital engine controller. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Bakar, Rosli and Ramasamy, Devarajan and Chen Wee, Chew (2003) Analysis of scavenging process in a new two stroke cross-scavenged engine. In: The 3rd International Conference On Advances In Strategic Technologies Malaysia, 2003, Kuala Lumpur, Malaysia.

Abu Bakar, Rosli and Abd. Rahim, Mohd. Fadzil and Gan, Leong Ming (2003) Effect of heat transfer on cylinder wall during cooling process using computational fluid dynamic. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Bakar, Rosli and Chong, Chin Lee and Indraguna, Vannebula E. (2003) An investigation of RSM approach in calibrating the ignition control module spark timing look-up table. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Bakar, Rosli and Leong, S.K. and M.A., Sera (2003) Effects of swirl device in a Compressed Natural Gas (CNG) engine. In: 3rd International Conference On Recent Advances in Materials, Minerals, and Environment 2003, 2003, Penang, Malaysia.

Abu Bakar, Rosli and Ramasamy, Devarajan and Chiew, Chen Wee (2003) Heat transfer in the cylinder of a new two stroke cross-scavenge engine. In: Malaysian Science and Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abu Hassan, Shukur and Mohd. Sam, Abdul Rahman and Ismail, Yob Saed and Tan, Chin Han and Tan, Sek Lin (2003) Bond behaviour of CFRP plate bonded to concrete. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Abul Hossain, Khandoker and Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Babu Appalanidu, Kiran and Nasir Ani, Farid (2003) Emission of air pollutants from an industrial oil burner used for small scale application. In: 17th Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Tanjung Bungah. Penang.

Ahmad, Mohd. Haris and Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohamad Shaiful (2003) Pengaruh nombor pusar ke atas pengurangan emisi NOx dari pembakar berbahan api cecair menggunakan pemusar udara aliran paksi. Jurnal Mekanikal (16). pp. 79-90. ISSN 0127-3396

Ahmad, Zair Asrar and Syahrom, Adiyanshah and Abd. Latif, Ainollotfi and Musa, Md. Nor (2003) Study on the stressing of a new symmetrical wobble plate compressor: kinematics and forces. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Ahmad , Rabiah (2003) Cox regression and genetic algorithms for analizing risk factor for all-cause mortality in older people. In: Proceedig of Conference on Management Science and Operations Research 2003, 2003, UKM, Bangi.

Aqida, S. N. and Ghazali, M. I. and Hashim, J. (2003) The effects of stirring speed and reinforcement particles on porosity formation in cast MMC. Jurnal Mekanikal (16). pp. 22-30. ISSN 0127-3396

Ariyono, Sugeng and Jamaluddin, Hishamuddin and Tawi, Kamarul Baharin (2003) A trend of present continuously variable transmission controls. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Ayob, Amran (2003) Stress analysis of piping elbows using FEM. The Journal of the Institution of Engineers, Malaysia (IEM), 64 (3). pp. 13-19. ISSN 012-513X

Azmi, Azwan Iskandar and Mohd. Taib, Jamaludin and Muhammad, Zulkepli (2003) Feature extraction from step AP224 file sets. Jurnal Mekanikal (16). pp. 31-46. ISSN 0127-3396

Azmi, Azwan Iskandar (2003) A study on implementation of step AP224 for process planning. In: Advanced Technology Congress 2003, 2003, Putrajaya, Selangor.

C

Chuan Chin, Wong and Ani, Farid Nasir and Mohd. Nor, Hussin Hussin (2003) Quantification of extracted pyrolysis oil from oil palm shells. In: International Conference On Chemical And Bioproses Engineering-ICCBPE 2004, 2003.

D

Dahalan, Md. Nizam and Mohd Jaafar, Mohd Nazri and Wan Ali, Wan Khairuddin and Mamat, Rizalman and Abd. Ghani, Mohd Shaiful Azman (2003) Determining Potassium Nitrate performance as solid rocket propellant for rocket engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Daud, Mohd Fadzil and Hanafiah, Khairul Anwar and Wan Hussin, Wan Nazdah (2003) Mechanical Design And Fabrication Of A Prototype Motorized Tricycle For The Disable. Project Report. Universiti Teknologi Malaysia. (Unpublished)

E

Eng Eng , Quek and Yusof , Sha'ri (2003) A survey of TQM practices in the Malaysian electrical and electronic industry. Quality Assurance & Total Quality Management, 14 (1). pp. 63-77. ISSN 0954-4127

H

H. Idris, M. and Ourdjini, A. and Hamzah, E. and J. Clegg, A. (2003) Grain refinement of an investment cast magnesium based alloy using inmould and vibration techniques. In: 14th Sceintific Conference & 13th Annual General Meeting Electrin Microscopy Society of Malaysia, 2003, The City Bayview Hotel. Langkawi, Kedah.

Hamzah, E. and Suardi, Khairmen and Ourdjini, A. (2003) Corrosion behavior of heat treated gamma-based titanium aluminide after hydrogen attack under immersion In 1.0M sulphuric acid solution. In: 13th Sceintific Conference & 13th Annual General Meeting Electrin Microscopy Society of Malaysia, 2003, The City Bayview Hotel. Langkawi, Kedah.

Hashim, Jasmi (2003) Glosari kejuruteraan bahan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0304–0

Hashim, Jasmi (2003) Pemprosesan bahan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0306–7

Hashim, Jasmi (2003) Pengenalan komposit matriks logam. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0318–0

Hassan, A. and Nabi Bakhs, M.Sharisff and Shaharoun, A.M and Jamaluddin, H. (2003) Improved SPC chart pattern recognition using statistical features. International Journal of Production Research, 41 (7). pp. 1587-1603. ISSN 1366-588X

Hassan, Azman and Wahit, Mat Uzir and Chee, Ching Yern (2003) Mechanical and morphological properties of PP/NR/LLDPE ternary blend - Effect of HVA-2. Polymer Testing, 22 (3). 281 -290. ISSN 0959–8103/2006

Hassan, Mohamad Zaki and Darus, Amer Nordin (2003) A thermoeconomic analysis for home air conditioning system. Jurnal teknikal dan kajian sosial, 1 (2). pp. 48-56. ISSN 1675-2228

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd. Husin, Mohd. Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie and Ani, Farid Nasir (2003) Carbon adsorbent from waste materials (coconut shell, oil palm shell, plastic bag) for hydrocarbon gas storage. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Herawan, Safarudin Ghazali (2003) Utilization of oil palm sell by converting into carbon molecular sieve for separation of methane from carbon dioxide as a waste minimization. In: Proceedings Environments 2003-Environmental Management And Sustainable Developmant For Better Future Growth, 2003, The Bayview Beach Resort. Batu Feringghi Beach. Penang.

Hudha, Khisbullah (2003) Moving Centre Point (MCP): Preliminary Study of A New Modified Search Method for Parameters Optimizaion. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Hudha, Khisbullah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan (2003) Handling analysis of a passenger car based on simulation and experimental studies. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Husain, Abdul Rashid (2003) Development of dental material testing equipment. Masters thesis, University of Newcastle Upon Tyne, United Kingdom, School of Mechanical and Systems Engineering.

I

Idris, Jamaliah and Salim, Farid and Suliman, Zahrulail and Osman, Edynoor (2003) Kajian sifat kehausan dan kekerasan komposit matriks aluminium. Jurnal Teknologi A (38A). pp. 11-24. ISSN 0127-9696

Ismail, Yob Saed and Mohd. Sam, Abdul Rahman and Abu Hassan, Shukur (2003) The Study Of Bonding Behavior Between Fiber Reinforced Polymer Composite Plate And Concrete Prism Under Tropical Climate. Project Report. Universiti Teknologi Malaysia. (Unpublished)

J

Jasmi Hashim, Jasmi Hashim (2003) Glosari Kejuruteraan Bahan. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0304-0

Jasmi Hashim, Jasmi Hashim (2003) Pengenalan Komposit Matriks Logam. Penerbit UTM, Johor,Malaysia. ISBN 983-52-0318-0

L

Lee, Lai Kin (2003) Thermal analysis of a vertically based fin array in a bounded region : a numerical experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Meng Hee (2003) A laboratory and field study of industrial gas turbine blade faults diagnosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. G., Normah (2003) New Technology: Thermoacoustic Heat Engine. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Ma'aram, Azaniwati (2003) Quality assessment of hollow prototypes model in fused deposit modeling. In: International Conference On CAD/CAM, Robotics and Factories of Future, 2003.

Mailah, Musa and Low, Hook Jong (2003) Intelligent active force control of a three-link manipulator using fuzzy logic. Jurnal Mekanikal (16). pp. 57-78. ISSN 0127-3396

Mailah, Musa and Purnomo, Setyo (2003) Control of a nonholonomic mobile robot with adaptive active force control strategy. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Mailah, Musa and Tang, H. H. (2003) A simulation study on the hybrid intelligent active force control of a two-link planar robot. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Cars and Fof 2003-Malaysia, 2003, Kuala Lumpur, Malaysia.

Maimun, Adi and Setyawan, Dony and Tan , Chun Chai (2003) Time domain simulation of damage stability assessment for Sarawak long boat using matlab. In: Marine Technology, 2003, UTM, Skudai.

Mat Darus, Intan Zaurah and Tokhi, M. O. (2003) Direct neuro-AVC modelling and control strategy for vibration suppression of a flexible plate structure. In: The 9th IEEE International Conference on Emerging Technologies and Factory Automation, ETFA2003, 16 - 19 September, Lisbon, Portugal.

Mat Lazim, Tholudin and Huong, Yu Saint, and Mat, Shabudin (2003) Computational Fluid Dynamic (CFD) to determine the aerodynamic interference of subsonic fighter aircraft. In: National Symposium On Science & Technology, 2003, Palace of the golden Horses, The Mines Resort City. Selangor.

Mat Rejab, Mohd. Rozainee and Alias, Amran and Saed Ismail, Yob (2003) The effect of compaction of polymeric structural foam. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Md. Palil, Md. Dan and Md. Yusuf, Md. Affendi and Wan Abdul Rahman, Wan Aizan (2003) Parafin wax application for product modelling. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Md. Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Mad Tap, Masine (2003) Implementation Of Design For Assembly (DFA)-between theory and practice. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Md. Tap, Masine and Daud, Mohd. and Wan Hussin, Wan Nazdah and Hanafiah, Khairul Anwar (2003) Anthropometri factors in the design of a mootorised tricycle for wheelchair users. In: Proceedings Of The 7th Southeast Asian Ergonomic Society and 4th Malaysian Ergonomic Conference Malaysia, 2003, Kuching, Sarawak.

Md. Tap, Masine and Mohamed Shaharoun, Awaluddin and Wan Hussin, Wan Nazdah (2003) Determination of felxible measures in advanced manufacturing system and their effect in productivity and responsiveness. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohamed Shaharoun, Awaluddin (2003) Modelling approaches to the design of manufacturing information systems. In: Engineering & Technology Conference, 2003, Crowne Plaza Riverside. Kuching, Sarawak.

Mohd Yusof, Sha'ri and Aspinwall , Elaine (2003) Total quality management implementation frameworks: comparison and review. Total Quality Management, 11 (34). pp. 281-294. ISSN 0954-4127, 1360-0613

Mohd Yusof, Noordin (2003) Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Mohd. Deros, Baba (2003) A framework for benchmarking implementation in manufacturing SMIs. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Mohd. Deros, Baba and Mohd Yusof, Sha'ri and Md. Salleh, Azhari (2003) Kajian mengenai peranan, definisi dan ciri industri kecil dan sederhana. In: Prosiding Penyelidikan Dan Pengembangan, 2003.

Mohd. Deros, Baba and Mohd.Yusof, Sha'ri and Md. Salleh, Azhari (2003) Kajian literatur untuk kerangka kerja pelaksanaan ukur rujuk bagi industri kecil dan sederhana. In: Prosiding Penyelidikan Dan Pengembangan, 2003.

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamed Shukri (2003) Mengkaji keberkesanan aplikasi pemusar udara ram bilah rata dalam mengurangkan emisi dari pembakar berbahan api cecair. Jurnal Teknologi F (39F). pp. 11-22. ISSN 0127-9696

Mohd. Jaafar, Mohamad Nazri and Sulian, Mohd. Sharul (2003) Kajian keberkesanan kaedah pembakaran udara berperingkat ke atas pembakar berbahan api gas. Jurnal Mekanikal (15). pp. 86-96. ISSN 0127-3396

Mohd. Jaafar, Mohamed Nazri and Abdul Mookmin, Muhamad and Samat, Ismail (2003) The effect of varying the swirler blade angle on reducing emission from liquid fuel burner. In: International Symposium On Transport Phenomena, 2003, Bali, Indonesia.

Mohd. Jaafar, Mohamed Nazri and Abdullah, Hayati and Salihin, Muhd. Azhar (2003) of noxious emission by staged combustion for better management of the natural resources. In: Proceedings Environments 2003-Environmental Management And Sustainable Developmant For Better Future Growth, 2003, The Bayview Beach Resort, Batu Feringghi Beach, Penang.

Mohd. Jaafar, Mohamed Nazri and Ani, Farid Nasir and Abdullah, Hayati and Salihin, Muhd. Azhar and Shaiful , Mohamad (2003) of noxious emissions by staged combustion for agricultural residues using a fluidized bed combuster. In: Recent Progress In Transport Phenomenon-The 14th International Sympossium on Transport Phenomenon (ISTP-14)-Indonesia, 2003, Indonesia.

Mohd. Noor, Alias and Abu Bakar, Rosli and Rajoo, Srithar and Ali Sera, Mardani (2003) Design and development of pumps for power plant and cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Rohani, Jafri (2003) Maintenance process improvement using Failure Made Analysis (FMEA): a case study. In: Reliability for Asia Plants, 2003, Kuala Lumpur.

Mohd. Saad, Rozaimi (2003) Kajian pembentukan tegasan dan anjakan pada matalat pemotong disebabkan oleh parameter pemotong menggunakan kaedah unsur tak terhingga (FEA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sam, Abdul Rahman and Ramasamy, Devarajan and Chiew, Chen Wee (2003) Tensile behaviour of fibre reinforced polymer. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Mohd. Yusof, Noordin and Venkatesh, V.C. and Abdullah, A. and Sharif, S. (2003) Turning of hardened tool steel using coated TiCN based cermet tool. In: 12th Sceintific Conference & 13th Annual General Meeting Electrin Microscopy Society of Malaysia, 2003, The City Bayview Hotel. Langkawi, Kedah.

Muhaimin, Abdul Halim (2003) Development of an automotive suspension system using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad, Pauziah and Darus, Amer Nordin (2003) An exergy analysis of an air conditioning system. Jurnal teknikal dan kajian sosial, 1 (2). pp. 34-47. ISSN 1675-2228

Muhamad, Sallehuddin and Hamid, Khairul Azura (2003) A four-seat light airplane design. In: 10th Australian International Aerospace Congress incorporating the 14th National Space Engineering Symposium 2003, 29 July – 1 August 2003, Brisbane, Queensland, Australia.

Musa, Hamidon (Penterjemah) and Che Ismail (Penterjemah), Che Abas (Penterjemah) (2003) Pembuatan tersepadu komputer: dari konsep menjadi kenyataan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0295–8

N

Nabi Baksh, Mohamed Shariff (2003) A comparison of jit with conventional inventory strategies in supply chain. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Nasution, Henry and Wan Hassan, Mat Nawi (2003) Saving energy for air conditioning with variable speed and proportional control system. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Ng, Chuan Huat (2003) Sistem rekabentuk corak dan acuan pinggan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Eng Peng (2003) Numerical study of flow in a diverging rectangular channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nusyirwan, Istas Fahrurrazi and Dahalan, Md Nizam (2003) Using Composite Materials To fabrication UAV Wing. Project Report. Universiti Teknologi Malaysia. (Unpublished)

O

Omar, Mohd. Nizam and Maarof, Mohd. Aizaini (2003) Ke arah pengurangan jurang masa sistem penindakbalasan pencerobohan melalui penggunaan pendekatan penjejakan pencerobohan pantas. In: Conference in Conjuction with The Public Institutions of Higher Learning R&D Exposition 2003, 2003, UPM, Serdang.

Omar, Zamri and Mailah, Musa (2003) A preliminary study into the application of active force control strategy to an automotive suspension system. Jurnal Mekanikal (15). pp. 42-57. ISSN 0127-3396

P

Patel Maganlal, Jayesh M. and Sahibuddin, Shamsul (2003) Group communication using spread over wireless netwrok. In: En Tech, 2003, Kuching, Sarawak.

Pitowarno, Endra and Mailah, Musa (2003) A disturbance cancellation method of a differntially driven non-holonomic mobile robot using active force control with optimized crude approximation. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Purnomo, Didik Setyo and Mailah, Musa (2003) of the membership function in a fuzzy logic based active force control applied to wheeled mobile. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Purnomo, Didik Setyo and Mailah, Musa (2003) Trajectory tracking control of a nonholonomic mobile robot using adaptive active force control with fuzzy logic. In: Advanced Technology Congress 2003, 2003, Putrajaya, Selangor.

Q

Quek, Eng Eng and Mohd. Yusof, Sha'ri (2003) A survey of TQM practices in the Malaysian electrical and electronic industry. Total Quality Management, 14 (1). pp. 63-77. ISSN 1478-3363

R

Rahmat, Mohd. Fua´ad and Ibrahim, Sallehuddin (2003) Instrumentasi. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0305–9

Rajoo, Srithar and Mohd Noor, Alias and Abdul Aziz, Azhar (2003) Performance Analysis of Turbocharger Effect on Engine in Local Cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Rashid, Roslina and Jamaluddin, Hishamuddin and Saidina Amin, Nor Aishah (2003) Application of multi-layer perceptron in modeling tapioca starch hydrolysis. In: AIAI2003: Book Of Abstract Malaysian-Japan Seminar On Artificial Intelligence Application In Industry, 2003, Kuala Lumpur, Malaysia.

Rozainee, M. and W. Ali, W. Khairuddin and G. Tan, K. and T. Wong, C. (2003) Comparison of sludge drying performance between microwave spouted bed and microwave fixed bed dryer. In: 17th Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Tanjung Bungah. Penang.

Rozainee, M. and W. Ali, W. Khairuddin and Tan, K. G. and Wong, C. T. (2003) Microwave spoted bed dryer for sludge waste. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

S

S. Kang, H. and Jalil, M. K. and Mailah, M. (2003) A robot interface using virtual reality technology. In: Engineering & Technology Conference, 2003, Crowne Plaza Riverside. Kuching, Sarawak.

S. Sharif, Rival (2003) Investigation on the effect of machining parameters in EDMing of titanium alloy. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Salleh, Mohamed Najib and Md. tap, Masine and Mohd. Shaharom, Awaluddin (2003) Assessment of methods for 3D garment design. In: Engineering & Technology Conference, 2003, Crowne Plaza Riverside. Kuching, Sarawak.

Shah Ishak, Iskandar (2003) Boundary layer measurement for UTM-List. In: National Symposium On Science & Technology, 2003, Palace of the golden Horses, The Mines Resort City. Selangor.

Sheikh Salim, Sheikh Ahmad Zaki and Wan Hassan, Mat Nawi (2003) Simulasi aerodinamik kenderaan dengan menggunakan fluent. Jurnal teknikal dan kajian sosial, 1 (2). pp. 9-33. ISSN 1675-2228

Suardi, Khairmen and Hamzah, E. and Ourdjini, A. (2003) Effect of alpha-2 and gamma phases on the susceptibility to hydrogen attack of gamma-base titanium aluminide. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Sulaiman, Sarina and Abdullah, Ismail and Shaari, Nadza (2003) Speech processing technology in intercative english language : a formal evaluation. In: Conference on Information Technology In Asia, 2003, Kuching, Sarawak, Malaysia.

Syahrom, Adiyansyah and Musa, Md. Nor and Wan Mat, Wan Ali (2003) Pembangunan Pemampat Berperingkat Simetri Berplat Wobal Untuk Gas Asli. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

T

Tai, Siew Fong (2003) Materials interaction during soldering and isothermal ageing of Sn-Pb and Sn-Ag-Cu solders on electroless Ni/Au surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Jaan Soon and Ani, Farid Nasir (2003) Diffusional behavior and absorption capacity of palm shell chars for oxygen and nitrogen - the effect of carbonization temperature. Carbon, 41 (4). pp. 840-842. ISSN 0008-6223

Tan, Jaan Soon and Ani, Farid Nasir (2003) Diffusional behavior and adsorption capacity of palm shell chars for oxygen and nitrogen—the effect of carbonization temperature. Carbon, 41 (4). pp. 840-842. ISSN 00086223

Tang, Howe Hing and Mailah, Musa and A. Jalil, Md. Kasim (2003) Collision free global path planning for a holonomic point mobile robot in a known stationary virtual environment. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Tawi, Kamarul Baharin and Yunus, Rohaizad and Talib@Charlie, Mohamad Husni (2003) Valve train investigation for CNG engine application. Jurnal Mekanikal, 15 . pp. 32-41. ISSN 0127-3396

V

Venkatesh, Vasisht, C. (2003) Precision manufacture of spherical and aspheric surfaces on plastics, glass, silicon and germanium. Current Sciences, 84 (9). pp. 1211-1219.

Venkatesh, V. C. and Izman, S. and Sharif, S. and Mon, T.T. and Konnoh, M. (2003) Assessment of partial ductile mode grinding of optical glass. In: Workshop on High Speed Machining of Hard/Super Hard Material, 2003, Copthorne Orchid Hotel, Singapore.

Venkatesh, V. C. and Izman, S. and Sharif, S. and Mon, T. T. and Konneh, K. (2003) Ductile Streaks in Precision Grinding of Hard and Brittle Materials. Academy Proceedings in Engineering Sciences, 28 (5). pp. 915-924. ISSN none

W

Wan Hamid, Wan Harun and Mohd Rohani, Jafri and Abu Bakar, Zailis (2003) Simulating an integrated ABC and six sigma : a tutorial. In: 19th International Conference On CAD/CAM Robotics And Factories Of The Future Malaysia, 2003, Kuala Lumpur, Malaysia.

Wan Hussin, Wan Nazdah and Daud, Mohd Fadzil and Abdul Majid, Fadzilah Adibah (2003) Design, Fabricate And Testing Of Stationary Magnetic Stirrer Bar For Uniform Mixing Of Cell Culture. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Nik, Wan Sani and Ani, Farid Nasir and Hassan, Masjuki (2003) Rheological properties of palm oil and palm-mineral oil blend. Jurnal Mekanikal (16). pp. 107-116. ISSN 0127-3396

Wan Nik, Wan Sani and Ani, Farid Nasir and Hasan, Masjuki (2003) Effect of lubrizol 7652 inhibitor on thermal oxidation of vegetable oil during heating at 95 degree celcius. In: International Conference On Chemical And Bioproses Engineering-ICCBPE 2005, 2003.

Wan Nik, Wan Sani and Ani, Farid Nasir and Hasan, Masjuki (2003) Newtonian and non-newtonian flow behavior of plant and mineral based oil using a coaxial viscometer. In: International Conference On Chemical And Bioproses Engineering-ICCBPE 2003, 2003.

Wong, Kim Seng (2003) Time domain simulation approach for the safe design of small vessels. Masters thesis, Universiti Teknologi Malaysia, Department of Mechanical Engineering.

Wong, Chuan Chin and Ani, Farid Nasir and Mohd Nor, Hussin (2003) A choice of renewable energy or uograded material from oil palm solid wastes. In: International Symposium On Renewable Energy-Environment Protection And Energy Solution for Sustainable Development, 2003, Kuala Lumpur.

Y

Yaakob, Omar and Daman, Daut and Bade, Abdullah (2003) Full scale measurement of wave and vessel motions. In: Marine Technology, 2003, UTM, Skudai.

Yeak, Su Hoe and Maimun, Adi (2003) Source distribution method and hydrodynamics coefficients of vessel. Jurnal Mekanikal, 15 . pp. 72-85. ISSN 0127-3396

Yusof, Yusri (2003) Disassemblability evaluation method (DEM) for green product. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Z

Zakaria, Khidzir and Shariff, Safian and Nabi Baksh, M. Shariff (2003) Development of pilot application. In: Workshop On Advanced Product Support Technologies Design, CAD/CAM, Rapid Prototyping And Virtual Manufacturing, 2003, UTM, Kuala Lumpur.

This list was generated on Wed Sep 17 18:01:47 2014 MYT.