Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 197.

A

A., Fereidouni Lotfabadi and H., R. Bakhsheshi-Rad and Idris, Mohd. Hasbullah and Hamzah, Esah and Asgarani, M. Kasiri (2016) The role of solution heat treatment on corrosion and mechanical behaviour of Mg-Zn biodegradable alloys. Canadian Metallurgical Quarterly, 55 (1). pp. 53-64. ISSN 0008-4433

Abdi, Behzad and Azwan, S. and Abdullah, Mohamed Ruslan and Ayob, Amran and Yahya, Mohd. Yazid (2016) Comparison of foam core sandwich panel and through-thickness polymer pin-reinforced foam core sandwich panel subject to indentation and flatwise compression loadings. Polymer Composites, 37 (2). pp. 612-619.

Abdoulmohammad, Gholamzadeh Chofreh and Feybi, Ariani Goni and Ismail, Syuhaida and Awaluddin, Mohamed Shaharoun and Jiri, Jaromir Klemes and Zeinalnezhad, Masoomeh (2016) A master plan for the implementation of sustainable enterprise resource planning systems (part I): concept and methodology. Journal of Cleaner Production, 136 . pp. 176-182. ISSN 0959-6526

Abdul Aziz, Ahmad Fawwaz and Abdul Hamid, Mohd. Kameil (2016) External particle shape analysis and its effect on tribological performance of disc brake. Jurnal Teknologi, 78 (9). pp. 29-33. ISSN 0127-9696

Abdul Aziz, Azhar and Sumeru, Kasni and Muhammad Said, Mohd. Farid and Mohd. Perang, Mohd. Rozi and Nasution, Henry (2016) Single-cylinder 125 cc stepped-piston engine for mobility and portable power generation applications. International Journal of Technology, 7 (2). pp. 352-361. ISSN 2086-9614

Abdul Halim, Zulhelmi Alif and Mat Yajid, Muhamad Azizi and Idris, Mohd. Hasbullah and Hamdan, Halimaton (2016) Thermal properties of unsaturated polyester composites filled with rice husk derived - silica aerogel. Polymers Research Journal, 10 (3). pp. 1-8. ISSN 1935-2530

Abdul Jalil, Mohamad Kasim and Mohd. Taib, Jamaludin and Nima, Fouladi Nejad and Fouladinejad, Nariman (2016) Development of a surrogate-based vehicle dynamic model to reduce computational delays in a driving simulator. Simulation: Transaction of The Society for Modelling and Simulation International, 92 (12). pp. 1087-1102. ISSN 0037-5497

Abdul Rahim, Norwazan and Mohd. Jaafar, Mohammad Nazri and Sapee, Syazwan and Abdelraheem Elhaj, Hazir Farouk (2016) Effect on particulate and gas emissions by combusting biodiesel blend fuels made from different plant oil feedstocks in a liquid fuel burner. Energies, 9 (8). pp. 1-18. ISSN 1996-1073

Abdulwahid, R. T. and Abdullah, O. G. and Aziz, S. B. and Hussein, S. A. and Muhammad, F. F. and Yahya, M. Y. (2016) The study of structural and optical properties of PVA:PbO2 based solid polymer nanocomposites. Journal of Materials Science: Materials in Electronics, 27 (11). pp. 12112-12118. ISSN 0957-4522

Afrizal, Efi and Koto, Jaswar (2016) Study on development of ice-ship. In: Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering- Isomase, 07 Nov, 2016.

Alexandrov, Sergei and Mustafa, Yusof and Ahmad, Zaini and Nguyen-Dinh, Kien (2016) Effect of white layer on residual autofrettage stresses and strains in open - end cylinders. International Journal of Pressure Vessels and Piping, 144 . pp. 49-55. ISSN 0308-0161

Ali, M. A. H. and Mailah, M. and Yussof, W. A. B. and Hamedon, Z. B. and Yussof, Z. B. and Majeed, A. P. P. (2016) Sensors fusion based online mapping and features extraction of mobile robot in the road following and roundabout. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

Alwan, R. A. and Wahid, M. A. and Sies, M. M. and Yasin, M. F. M. (2016) Effects of air entry of swirling flameless combustion in a low NOx burner. International Review of Mechanical Engineering, 10 (2). pp. 87-94. ISSN 1970-8734

Amran, Ahmad Zulkhairie and Abdul Latiff, Zulkarnain and Nasution, Henry and Mohd. Perang, Mohd. Rozi and Mohd. Jamil, Hishammudin and Misseri, Mohd. Nazri (2016) Development and evaluation of an automotive air-conditioning test rig. Jurnal Teknologi, 78 (10-2). pp. 55-60. ISSN 0127-9696

Ani, Farid Nasir (2016) Sustainable biofuels and other related bio-products from palm cultivations. In: 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016), 2016.

Anshar, Muhammad and Ani, Farid Nasir and Kader, Ab. Saman (2016) Electrical energy potential of rice husk as fuel for power generation in Indonesia. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3616-3624. ISSN 1819-6608

Aparow, Vimal Rau and Hudha, Khisbullah and Megat Ahmad, Megat Mohamad Hamdan and Jamaluddin, Hishamuddin (2016) Development and verification of a 9-DOF armored vehicle model in the lateral and longitudinal directions. Jurnal Teknologi, 78 (6). pp. 117-137. ISSN 0127-9696

Ariffudin, Muhammad Hafidz and Mohd. Zawawi, Fazila and Mohamed Kamar, Haslinda and Kamsah, Nazri (2016) Effectiveness of blade tip on low speed horizontal axis wind turbine performance. Jurnal Teknologi, 78 (8-4). pp. 31-39. ISSN 0127-9696

Arifin, Nurulhuda and Yusoff, Hafizzal and Sudin, Izman and Abdul Kadir, Aini Zuhra and Ali, Rafidah and Yacob, Suhaila and Arsyad, Azrina and Ismail, Shaiful Anwar (2016) Study the effect of CNC milling parameter on surface roughness of POM material. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6611-6614. ISSN 1819-6608

Athirah, Nadia Nordin and Mohd. Rohani, Jafri and Zainal Abidin, Norsheila and Raemy, Md. Zein (2016) Knowledge, attitude and practice of MSD injuries from Malaysian employer perspective. In: 4th Scientific Conference on Occupational Safety and Health, 14-17 Nov, 2016, Johor Bahru, Malaysia.

B

Bahador, A. and Saud, S. N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M. K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding In The World, 60 (6). pp. 1133-1139.

Bakhsheshi-Rad, H. R. and Abdellahi, M. and Hamzah, E. and Ismail, A. F. and Bahmanpour, M. (2016) Modelling corrosion rate of biodegradable magnesium-based alloys: the case study of Mg-Zn-RE-xCa (x = 0, 0.5, 1.5, 3 and 6 wt%) alloys. Journal of Alloys and Compounds, 687 . pp. 630-642.

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Kasiri-Asgarani, M. and Daroonparvar, M. and Parham, S. and Iqbal, N. and Medraj, M. (2016) Novel bi-layered nanostructured SiO2/Ag-FHAp coating on biodegradable magnesium alloy for biomedical applications. Ceramics International, 42 (10). pp. 11941-11950. ISSN 0272-8842

Bakhsheshi-Rad, H. R. and Hamzah, E. and Kasiri-Asgarani, M. and Jabbarzare, S. and Daroonparvar, M. and Najafinezhad, A. (2016) Fabrication, degradation behavior and cytotoxicity of nanostructured hardystonite and titania/hardystonite coatings on Mg alloys. Vacuum, 129 . pp. 9-12. ISSN 0042-207X

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Daroonparvar, M. and Yajid, M. A. M. and Medraj, M. (2016) Preparation and characterization of NiCrAlY/nano-YSZ/PCL composite coatings obtained by combination of atmospheric plasma spraying and dip coating on Mg-Ca alloy. Journal of Alloys and Compounds, 658 . pp. 440-452. ISSN 0925-8388

Bakhsheshi-Rad, H. R. and Hamzah, E. and Kasiri-Asgarani, M. and Jabbarzare, S. and Iqbal, N. and Abdul Kadir, M. R. (2016) Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications. Materials Science and Engineering C, 60 . pp. 526-537. ISSN 0928-4931

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Asgarani, Masoud Kasiri and Jabbarzare, Saeid and Iqbal, N. and Abdul Kadir, Mohammed Rafiq (2016) Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications. Materials Science and Engineering C, 60 . pp. 526-537. ISSN 0928-4931

C

Che Daud, Z. H. and Chrenko, D. and Dos Santos, F. and Aglzim, E. H. and Keromnes, A. and Le Moyne, L. (2016) 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. International Journal of Energy Research, 40 (8). pp. 1144-1154. ISSN 0363-907X

Che Sidik, Nor Azwadi and Adamu, Isa Muhammad and Muhammad, Mahmud Jamil and R. Kefayati, G. H. and Mamat, Rizalman and Najafi, G. (2016) Recent progress on hybrid nanofluids in heat transfer applications: a comprehensive review. International Communications in Heat and Mass Transfer, 78 . pp. 68-79. ISSN 0735-1933

Cheng, S. -Y. and Mansor, S. (2016) Influence of rear-roof spoiler on the aerodynamic performance of hatchback vehicle. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Chiong, M. S. and Rajoo, S. and Romagnoli, A. and Costall, A. W. and Martinez-Botas, R. F. (2016) One-dimensional pulse-flow modeling of a twin-scroll turbine. Energy, 115 . pp. 1291-1304. ISSN 0360-5442

Chong, Cheng Tung and Lam, Su Shiung and Hochgreb, Simone (2016) Effect of mixture flow stratification on premixed flame structure and emissions under counter-rotating swirl burner configuration. Applied Thermal Engineering, 105 . pp. 905-912. ISSN 1359-4311

Chong, W. W. F. and Chidlow, S. J. (2016) Analysing the effects of sliding, adhesive contact on the deformation and stresses induced within a multi-layered elastic solid. Mechanics of Materials, 101 . pp. 1-13.

Chong, W. W. F. and Ng, J. H. (2016) An atomic-scale approach for biodiesel boundary lubricity characterisation. International Biodeterioration & Biodegradation, 113 . pp. 34-43.

D

Damirchi, H. and Najafi, G. and Alizadehnia, S. and Mamat, R. and Nor Azwadi, C. S. and Azmi, W. H. and Noor, M. M. (2016) Micro Combined Heat and Power to provide heat and electrical power using biomass and Gamma-type Stirling engine. Applied Thermal Engineering, 103 . pp. 1460-1469. ISSN 1359-4311

Dasht Arzhandi, Masood Rezaei and Ismail, Ahmad Fauzi and Goh, Pei Sean and Wan Azelee, Ihsan and Abbasgholipourghadim, Mohammad and Ghani, Ur Rehman and Matsuura, T. (2016) Zeolite zsm5-filled pvdf hollow fiber mixed matrix membranes for efficient carbon dioxide removal via membrane contactor. Industrial and Engineering Chemistry Research, 55 (49). pp. 12632-12643. ISSN 0888-5885

Daud, Z. H. C. and Chrenko, D. and Dos Santos, F. and Aglzim, E. and Keromnes, A. and Le Moyne, L. (2016) 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. International Journal of Energy Research, 40 (8). pp. 1144-1154.

Derakhshan Asl, Ali and Wong, Kuan Yew and Tiwari, Manoj Kumar (2016) Unequal-area stochastic facility layout problems: solutions using improved covariance matrix adaptation evolution strategy, particle swarm optimisation, and genetic algorithm. International Journal of Production Research, 54 (3). pp. 799-823. ISSN 0020-7543

E

Elsiti, Nagwa Mejid and Mohd. Yusof, Noordin and Adam, Umar Alkali (2016) Fabrication of high aspect ratio micro electrode by using EDM. In: IOP Conference Series: Materials Science and Engineering, 12-14 Nov, 2015, Kuala Lumpur, Malaysia.

F

Faghirinejadfard, Amir and Mahdiyar, Amir and Marsono, Abdul Kadir and Mohandes, Saeed Reza and Omrany, Hossein and Tabatabaee, Sanaz and Md. Tap, Masine (2016) Economic comparison of industrialized building system and conventional construction system using building information modeling. Jurnal Teknologi, 78 (1). pp. 195-207. ISSN 0127-9696

Farahany, S. and Ghandvar, H. and Nordin, N. A. and Ourdjini, A. and Idris, M. H. (2016) Effect of primary and eutectic Mg2Si crystal modifications on the mechanical properties and sliding wear behaviour of an Al–20Mg2Si–2Cu–xBi composite. Journal of Materials Science and Technology, 32 (11). pp. 1083-1097. ISSN 1005-0302

Faraji, Soheila and Ani, Farid Nasir (2016) Electroless nano zinc oxide-activate carbon composite supercapacitor electrode. Journal of Electroceramics, 36 (42373). pp. 122-128. ISSN 385-3449

Fatihhi, S. J. and Abdul Rahim, Rabiatul Adibah and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Kamarul, T. and Syahrom, Ardiyansyah (2016) Effect of torsional loading on compressive fatigue behaviour of trabecular bone. Journal of the Mechanical Behavior of Biomedical Materials, 54 . pp. 21-32. ISSN 1751-6161

Fouladinejad, N. and Fouladinejad, N. and Abdul Jalil, M. K. and Mohd. Taib, J. (2016) Development of a surrogate-based vehicle dynamic model to reduce computational delays in a driving simulator. Simulation, 92 (12). pp. 1087-1102. ISSN 0037-5497

G

Galankashi, M. R. and Helmi, S. A. and Hashemzahi, P. (2016) Supplier selection in automobile industry: a mixed balanced scorecard-fuzzy AHP approach. Alexandria Engineering Journal, 55 (1). pp. 93-100. ISSN 1110-0168

Galankashi, Masoud Rahiminezhad and Fallahiarezoudar, Ehsan and Moazzami, Anoosh and Helmi, Syed Ahmad and Rohani, Jafri Mohd. and Yusof, Noordin Mohd. (2016) An efficient integrated simulation–Taguchi approach for sales rate evaluation of a petrol station. Neural Computing and Applications . pp. 1-13. ISSN 0941-0643 (In Press)

Galankashi, Masoud Rahiminezhad and Fallahiarezoudar, Ehsan and Moazzami, Anoosh and Mohd. Yusof, Noordin and Syed Hassan, Syed Ahmad Helmi (2016) Performance evaluation of a petrol station queuing system: a simulation-based design of experiments study. Advances in Engineering Software, 92 . pp. 15-26. ISSN 0965-9978

Galankashi, Masoud Rahiminezhad and Syed Ahmad Helmi, Syed Hassan (2016) Assessment of hybrid Lean-Agile (Leagile) supply chain strategies. Journal of Manufacturing Technology Management, 27 (4). pp. 470-482. ISSN 1741-038X

Ganesan, Poo Balan and Islam, Md. Tariqul and Sahu, Jaya Narayan and Sandaran, Shanti C. (2016) Effect of column angles to rise velocity of a single bubble: a CFD study. Progress in Computational Fluid Dynamics, 16 (5). pp. 288-299. ISSN 1468-4349

Ganjehkaviri, A. and Mohd. Jaafar, M. N. and Hosseini, S. E. and Barzegaravval, H. (2016) On the optimization of energy systems: Results utilization in the design process. Applied Energy, 178 . pp. 587-599.

Gholami, A. and Wahid, M. A. and Mohammed, H. A. and Saat, A. and Mohd. Yasin, M. F. and Sies, M. M. and Kamaruzaman, N. and Rahman, M. M. (2016) Numerical evaluation of thermo-hydraulic performance in fin-and-tube compact heat exchangers with different tube cross-sections. Jurnal Teknologi, 78 (8-4). pp. 113-118. ISSN 0127-9696

Gholami, H. and Rezaei, G. and Saman, M. Z. M. and Sharif, S. and Zakuan, N. (2016) State-of-the-art Green HRM System: sustainability in the sports center in Malaysia using a multi-methods approach and opportunities for future research. Journal of Cleaner Production, 124 . pp. 142-163. ISSN 0959-6526

Gholamzadeh Chofreh, A. and Goni, F. A. and Ismail, S. and Mohamed Shaharoun, A. and Klemeš, J. J. and Zeinalnezhad, M. (2016) A master plan for the implementation of sustainable enterprise resource planning systems (part I): concept and methodology. Journal of Cleaner Production, 136 . pp. 176-182. ISSN 0959-6526

H

Hamid, Izwan and Muhamad Said, Mohd. Farid and Mohamed Soid, Shahril Nizam and Nasution, Henry (2016) Effect of cylinder deactivation strategies on engine performances using one-dimensional simulation technique. Jurnal Teknologi, 78 (8-4). pp. 49-55. ISSN 0127-9696

Hanipah, M. H. and Abdullah, A. H. and Sidik, N. A. C. and Yunus, R. and Yasin, M. N. A. and Muhammad Yazid, M. N. A. W. (2016) Assessment of outdoor thermal comfort and wind characteristics at three different locations in Peninsular Malaysia. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Harun, M. Y. and Che Yunus, M. A. and Ismail, M. H. S. and Morad, N. A. (2016) A comparative investigation on the effect of thermal treatments on the mechanical properties of oil palm fruitlet components. Journal of the Taiwan Institute of Chemical Engineers, 60 . pp. 582-587. ISSN 1876-1070

Haryono, A. P. and Sumeru, K. and Aziz, A. A. and Nasution, H. (2016) Numerical investigation on ejector as an expansion device using R290 in residential air conditioner for various cooling capacity. ARPN Journal Of Engineering And Applied Sciences, 11 (2). pp. 805-808. ISSN 1819-6608

Hassan, A. W. and Mohd. Yusof, Noordin and Sudin, Izman and Zakiah, K. (2016) Effect of carburizing process in enhancing nickel interlayer adhesion to WC-6% Co-substrate and promoting diamond nucleation and growth. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 230 (2). pp. 620-626. ISSN 1464-4207

Hassan, M. and Ani, F. N. and Syahrullail, S. (2016) Tribological performance of refined, bleached and deodorised palm olein blends bio-lubricants. Journal of Oil Palm Research, 28 (4). pp. 510-519. ISSN 1511-2780

Hastuti, Kurnia and Hamzah, Esah and Hashim, Jasmi (2016) Effect of annealing on the microstructures and deformation behaviour of Ti-50.7at.%Ni shape memory alloy. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 230 (2). pp. 436-445. ISSN 1464-4207

Hong, Liu and Mcbride, J. W. and Mohd. Yusop, Mohd. Zamri (2016) Surface characterization of a Au/CNT composite for a MEMS switching application. In: 16th International Conference on Nanotechnology - IEEE NANO 2016, 2016, Japan.

Hosseini, S. E. and Bagheri, G. and Wahid, M. A. (2016) Impacts of inlet step on the performance of a micro-combustor. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Huang, Wei and Mohd. Samin, Pakharuddin and Tawi, Kamarul Baharin (2016) Feasibility investigation on novel concept of clutched train system to substitute for vehicular friction clutch. Journal of Advanced Mechanical Design, Systems and Manufacturing, 10 (1). ISSN 1881-3054

Hui, Kar Hoou and Ooi, Ching Sheng and Lim, Meng Hee and Leong, M. Salman (2016) A hybrid artificial neural network with dempster-shafer theory for automated bearing fault diagnosis. Journal of Vibroengineering, 18 (7). pp. 4409-4418. ISSN 1392-8716

I

Imani Yengejeh, S. and Kazemi, S. A. and Ivasenko, O. and \xD6chsner, A. (2016) A refined finite element analysis on the vibrational properties of ideal and degenerated carbon nanostructures. Solid State Communications, 231-23 . pp. 36-42. ISSN 0038-1098

Imani Yengejeh, Sadegh and Kazemi, Seyedeh Alieh and Ochsner, Andreas (2016) Advances in mechanical analysis of structurally and atomically modified carbon nanotubes and degenerated nanostructures: a review. Composites Part B: Engineering, 86 . pp. 95-107. ISSN 1359-8368

Ishak, M. R. and Abu Bakar, A. R. and Belhocine, A. and Taib, J. M. and Omar, W. Z. W. (2016) Brake torque analysis of fully mechanical parking brake system: theoretical and experimental approach. Measurement: Journal of the International Measurement Confederation, 94 . pp. 487-497. ISSN 0263-2241

Isvandzibaei, M. R. and Jamaluddin, H. and Raja Hamzah, R. I. (2016) Vibration analysis of supported thick-walled cylindrical shell made of functionally graded material under pressure loading. JVC/Journal of Vibration and Control, 22 (4). pp. 1023-1036. ISSN 1077-5463

Isvandzibaei, M. R. and Jamaluddin, H. and Raja Hamzah, R. I. (2016) Vibration analysis of supported thick-walled cylindrical shell made of functionally graded material under pressure loading. JVC/Journal of Vibration and Control, 22 (4). pp. 1023-1036. ISSN 1077-5463

Izhan, I. M. and Syahrullail, S. and Yong, S. Y. and Nurul, M. A. (2016) Investigation of micro-pits formation on billet surfaces in plane strain extrusion. Jurnal Teknologi, 78 (10-2). pp. 39-45. ISSN 0127-9696

J

Jafari, H. and Hessam, H. and Shahri, S. M. G. and Assadian, M. and Shairazifard, S. H. P. and Idris, M. H. (2016) Characterizing sintered nano-hydroxyapatite sol-gel coating deposited on a biomedical Ti-Zr-Nb alloy. Journal of Materials Engineering and Performance, 25 (3). pp. 901-909. ISSN 1059-9495

Jahanshaloo, Leila and Che Sidik, Nor Azwadi and Fazeli, Alireza and Mahmoud, Pesaran Hajiabbas (2016) An overview of boundary implementation in lattice boltzmann method for computational heat and mass transfer. International Communications in Heat and Mass Transfer, 78 . pp. 1-12. ISSN 0735-1933

Jannati, M. and Sutikno, T. and Idris, N. R. N. and Aziz, M. J. A. (2016) High performance speed control of single-phase induction motors using switching forward and backward EKF strategy. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 17-27. ISSN 2088-8694

K

Kafuku, J. M. and Saman, M. Z. M. and Yusof, S. M. and Mahmood, S. (2016) A holistic framework for evaluation and selection of remanufacturing operations: an approach. International Journal of Advanced Manufacturing Technology, 87 (5-8). pp. 1571-1584. ISSN 0268-3768

Kamaruzaman, Anis Farhan and Mohd. Zain, Azlan and Mohd. Yusof, Noordin and Najarian, Farhad (2016) Optimization of machining parameters for minimization of roundness error in deep hole drilling using minimum quantity lubricant. In: MATEC Web Of Conferences, 01-02 May, 2016, Phuket, Thailand.

Kamaruzaman, N. B. and Saat, A. (2016) Characterization of a short microchannel device for surface cooling. Jurnal Teknologi, 78 (8-4). pp. 25-30. ISSN 0127-9696

Kaviri, A. G. and Jaafar, M. N. M. (2016) Effects of air compressor pressure ratio on exergy efficiency, cost and environment of a Combined Cycle Power Plant. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Kchaou, Mohamed and Mat Lazim, Ahmad Razimi and Abu Bakar, Abd. Rahim and Fajoui, Jamal and Elleuch, Riadh and Jacquemin, Frédéric (2016) Effects of steel fibers and surface roughness on squealing behavior of friction materials. Transactions of the Indian Institute of Metals, 69 (6). pp. 1277-1287. ISSN 0972-2815

Keong, Woo Tze and Ahmad, Faiz and Sharif, Safian and Moinser, Mohd. Azuwan (2016) Response surface methodology integrated modeling of glass fiber reinforced polymer delamination in high speed drilling. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4176-4185. ISSN 1819-6608

Khan, R. and Alderliesten, R. and Badshah, S. and Khattak, M. A. and Khan, M. S. and Benedictus, R. (2016) Experimental investigation of the microscopic damage development at mode i fatigue delamination tips in carbon/epoxy laminates. Jurnal Teknologi, 78 (11). pp. 33-40. ISSN 0127-9696

Khattak, M. A. and Zareen, N. and Mukhtar, A. and Kazi, S. and Jalil, A. and Ahmed, Z. and Jan, M. M. (2016) Root cause analysis (RCA) of fractured ASTM A53 carbon steel pipe at oil & gas company. Case Studies in Engineering Failure Analysis, 7 . pp. 1-8. ISSN 2213-2902

Kherbeet, A. S. and Mohammed, H. A. and Ahmed, H. E. and Salman, B. H. and Alawi, O. A. and Safaei, M. R. and Khazaal, M. T. (2016) Mixed convection nanofluid flow over microscale forward-facing step — effect of inclination and step heights. International Communications in Heat and Mass Transfer, 78 . pp. 145-154. ISSN 0735-1933 (In Press)

L

Lam, S. S. and Liew, R. K. and Lim, X. Y. and Ani, F. N. and Jusoh, A. (2016) Fruit waste as feedstock for recovery by pyrolysis technique. International Biodeterioration and Biodegradation, 113 . pp. 325-333. ISSN 0964-8305

Lam, S. S. and Wan Mahari, W. A. and Cheng, C. K. and Omar, R. and Chong, C. T. and Chase, H. A. (2016) Recovery of diesel-like fuel from waste palm oil by pyrolysis using a microwave heated bed of activated carbon. Energy, 115 . pp. 791-799. ISSN 0360-5442

Lazim, A. R. M. and Kchaou, M. and Hamid, M. K. A. and Bakar, A. R. A. (2016) Squealing characteristics of worn brake pads due to silica sand embedment into their friction layers. Wear, 358-35 . pp. 123-136. ISSN 0043-1648

Li, Xin and Yahya, Mohd. Yazid and Nia, Amin Bassiri and Wang, Zhihua and Lu, Guoxing (2016) Dynamic failure of fibre-metal laminates under impact loading - experimental observations. Journal of Reinforced Plastics and Composites, 35 (4). pp. 305-319. ISSN 0731-6844

Lim, L. W. and Aziz, F. and Muhammad, F. F. and Supangat, A. and Sulaiman, K. (2016) Electrical properties of Al/PTB7-Th/n-Si metal-polymer-semiconductor Schottky barrier diode. Synthetic Metals, 221 . pp. 169-175. ISSN 0379-6779

Lotfi, M. and Jahanbakhsh, M. and Akhavan Farid, A. (2016) Wear estimation of ceramic and coated carbide tools in turning of Inconel 625: 3D FE analysis. Tribology International, 99 . pp. 107-116. ISSN 0301-679X

Lu, Alex Chia Yang and Ani, Farid Nasir (2016) Controlled microwave-induced pyrolysis of waste rubber tires. International Journal of Technology, 7 (2). pp. 314-322. ISSN 2086-9614

Lu, Alex Chia Yang and Ani, Farid Nasir (2016) Controlled microwave-induced pyrolysis of waste rubber tires. International Journal of Technology, 7 (2). pp. 314-322. ISSN 2086-9614

M

M'hamed, B. and Che Sidik, N. A. and Akhbar, M. F. A. and Mamat, R. and Najafi, G. (2016) Experimental study on thermal performance of MWCNT nanocoolant in Perodua Kelisa 1000cc radiator system. International Communications in Heat and Mass Transfer, 76 . pp. 156-161. ISSN 0735-1933

M'hamed, Beriache and Che Sidik, Nor Azwadi and Muhammad Yazid, Muhammad Noor Afiq Witri and Mamat, Rizalman and Najafi, G. and R. Kefayati, G. H. (2016) A review on why researchers apply external magnetic field on nanofluids. International Communications in Heat and Mass Transfer, 78 . pp. 60-67. ISSN 0735-1933

M. R., Yavari and dris, Mohd. Hasbullah (2016) Effect of surface roughness and taper angle on junction strength of modular biomedical implant. International Journal of Mechanical and Mechatronics Engineering, 16 (2). pp. 42-47. ISSN 2227-2771

Mahtaba, Assadian and Hassan, Jafari and Seyed Mortezaa, Ghaffari Shahri and Idris, Mohd. Hasbullah and Davooda, Almasi (2016) Topography, wetting, and corrosion responses of electrodeposited hydroxyapatite and fluoridated hydroxyapatite on magnesium. Bio-Medical Materials and Engineering, 27 (2-3). pp. 287-303. ISSN 0959-2989

Mamat, Aman Mohd. Ihsan and Martinez-Botas, Ricardo F. and Rajoo, Srithar and Hao, Liu and Romagnoli, Alessandro (2016) Design methodology of a low pressure turbine for waste heat recovery via electric turbocompounding. Applied Thermal Engineering, 107 . pp. 1166-1182. ISSN 1359-4311

Mare, Thierry and Estelle, Patrice and Halelfadl, Salma and Mohd. Ghazali, Normah (2016) Consideration of carbon nanotube-based nanofluid in thermal transfer. Jurnal Teknologi, 78 (8-4). pp. 41-48. ISSN 0127-9696

Marwah, Omar Mohd. Faizan and Sharif, Safian and Ibrahim, Mustaffa and Mohamad, Elmy Johana and Idris, Mohd. Hasbullah (2016) Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (5). pp. 949-958. ISSN 1464-4207

Masoud, Rahiminezhad Galankashi and Syed Hassan, Syed Ahmad Helmi and Hashemzahi, Pooria (2016) Supplier selection in automobile industry: a mixed balanced scorecard- fuzzy AHP approach. Alexandria Engineering Journal, 55 (1). pp. 93-100. ISSN 1110-0168

Mat Junoh, Muhammad and Ibrahim, Zaharah and Ani, Farid Nasir (2016) Activated carbon from Mukah coal for textile wastewater bioremediation treatment. Jurnal Teknologi, 78 (9-2). pp. 1-7. ISSN 0127-9696

Maziar, Reza and Kasni, Sumeru and Senawi, Mohd. Yusoff and Ani, Farid Nasir (2016) Performance of ejector refrigeration cycle for automotive air conditioning. In: Applied Mechanics and Materials, 2015.

Md. Saad, Amir Putra and Noor Jasmawati, Noor Jasmawati and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Nur, Hadi and Hermawan, Hendra and Syahrom, Ardiyansyah (2016) Dynamic degradation of porous magnesium under a simulated environment of human cancellous bone. Corrosion Science, 112 . pp. 495-506. ISSN 0010-938X

Mehrez, O. and Zyada, Z. and Abbas, H. S. and Abo Ismail, A. A. (2016) Non-prehensile manipulation planning of a three-rigid-link object using two cooperative robot arms. International Journal Of Modelling, Identification And Control, 26 (1). pp. 19-31. ISSN 1746-6172

Mohamad @ Asmara, Ahmad Alham and Francis Nordin, Norlisa and Mohd. Yusof, Nor Fasiha (2016) Male and female designers cognitive pattern based on linkography approach. In: The First Multidisciplinary Conference on Mechanical Engineering, MCME, 2016, Skudai, Johor.

Mohamed Kamar, Haslinda and Kamsah, Nazri and Alhamid, Muhammad Idrus and Sumeru, Kasni (2016) Effect of regeneration air temperature on desiccant wheel performance. International Journal of Technology, 7 (2). pp. 281-287. ISSN 2086-9614

Mohamed Kamar, Haslinda and Kamsah, Nazri and Sabri, Intan Sabariah and Musa, Md. Nor (2016) Reducing soak air temperature inside a car compartment using ventilation fans. Jurnal Teknologi, 78 (8-4). pp. 155-166. ISSN 0127-9696

Mohd. Ahyan, Nurul Aini and Samion, Syahrullail (2016) Influence of micro-pits indentation and palm based-oil on taper die sliding contact surface in cold extrusion process. International Journal of Precision Engineering and Manufacturing, 17 (7). pp. 917-930. ISSN 2234-7593

Mohd. Ghazali, N. and Fa, L. K. (2016) Numerical simulation of flow surrounding a thermoacoustic stack:single-stack against double-stack plate domain. Jurnal Teknologi, 78 (8-4). pp. 119-125. ISSN 0127-9696

Mohd. Ghazali, Normah and Fa, Liew Kim (2016) Numerical simulation of flow surrounding a thermoacoustic stack: single-stack against double-stack plate domain. Jurnal Teknologi, 78 (8-4). pp. 119-125. ISSN 0127-9696

Mohd. Yusof, Noordin and Razavykia, Abbas and Farahany, Saeed and Esmaeilzadeh, Alireza (2016) Effect of modifier elements on machinability of AL-20%Mg2Si metal matrix composite during dry turning. Machining Science and Technology, 20 (3). pp. 460-474. ISSN 1091-0344

Mohebbi, M. and Hashemi, M. and Mailah, M. (2016) Implementing active force control to reduce vibration of a short length drive shaft. Jurnal Teknologi, 78 (10). pp. 167-174. ISSN 0127-9696

Mohsenizadeh, S. and Alipour, R. and Ahmad, Z. and Alias, A. (2016) Influence of auxetic foam in quasi-static axial crushing. International Journal of Materials Research, 107 (10). pp. 916-924. ISSN 1862-5282

Muhammad, F. F. and Yahya, M. Y. and Ketuly, K. A. and Muhammad, A. J. and Sulaiman, K. (2016) A study on the spectroscopic, energy band, and optoelectronic properties of α,ω-dihexylsexithiophene/tris(8-hydroxyquinolinate) gallium blends; DH6T/Gaq3 composite system. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 169 . pp. 144-151. ISSN 1386-1425

Muhammad, Yasar Javaid and Ovinis, Mark and Fakhruldin, Mohd. Hashim and Abdul Malik, Adi Maimun and Yasser, M. Ahmed and Ullah, Barkat (2016) Effect of water current on underwater glider velocity and range. Jurnal Teknologi, 78 (10-4). pp. 47-53. ISSN 0127-9696

Muhamad, W. A. W. and Ngah, R. and Jamlos, M. F. and Soh, P. J. and Jamlos, M. A. and Lago, H. (2016) Antenna array bandwidth enhancement using polymeric nanocomposite substrate. Applied Physics A: Materials Science and Processing, 122 (4). pp. 1-9.

N

Nikmat Leong, Siti Asma and Mohd. Samin, Pakharuddin and Idris, Ani and Mazlan, Saiful Amri and A. Rahman, Azura Hanis (2016) Synthesis, characterization and magnetorheological properties of carbonyl iron suspension with superparamagnetic nanoparticles as an additive. Smart Materials and Structures, 25 (2). ISSN 0964-1726

Nakisa, M. and Behrouzi, F. and Mobasher Amini, A. (2016) Different failure modes assessment to improve the sandwich composite panel stiffness with honeycomb core for marine structures application. Jurnal Teknologi, 78 (11). pp. 183-189. ISSN 0127-9696

Nasution, Henry and Dahlan, Afiq Aiman and Abdul Aziz, Azhar and Azmi, Ulul and Sumeru, Sumeru and Shodiya, Sulaimon (2016) Energy efficiency of a variable speed of the centralized air conditioning system using PID controller. Jurnal Teknologi, 78 (8-4). pp. 65-71. ISSN 0127-9696

Ngadiman, N. H. A. and Mohd. Yusof, N. and Idris, A. and Kurniawan, D. (2016) Mechanical properties and biocompatibility of co-axially electrospun polyvinyl alcohol/maghemite. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (8). pp. 739-749. ISSN 0954-4119

Nilda Tri Putri, Nilda Tri Putri and Retha, Frastia and Mohd. Yusof, Sha'ri (2016) Design of quality system documentation in hydrotiller production unit as improvement of quality management system in small and medium enterprise. International Journal of Productivity and Quality Management, 19 (1). pp. 116-138. ISSN 1746-6474

Noman, Fawaz Ghaleb and Kamsah, Nazri and Mohamed Kamar, Haslinda (2016) Improvement of thermal comfort inside a mosque building. Jurnal Teknologi, 78 (8-4). pp. 9-18. ISSN 0127-9696

Noor Adila, A. S. and Norafifah, H. and Noordin, M. Y. and Wong, K. Y. and Izman, S. (2016) Modeling of preparation conditions of PES ultrafiltration hollow fiber membranes using statistical regression techniques. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9718-9724. ISSN 1819-6608

Noorawzi, N. and Samion, S. (2016) Tribological effects of vegetable oil as alternative lubricant: a pin-on-disk tribometer and wear study. Tribology Transactions, 59 (5). pp. 831-837. ISSN 1040-2004

Norafifah, H. and Noor Adila, A. S. and Noordin, M. Y. and Wong, K. Y. and Izman, S. (2016) Clarification of factors that affect the flux performance of hollow fiber membranes during ultrafiltration using design of experiments. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10750-10756. ISSN 1819-6608

Nur Syazana, Nur Syazana and Sukmana, Irza (2016) Electrospun-based fibrous scaffold for cardiovascular engineering applications: a review. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4778-4781. ISSN 1819-6608

Nuraliza, N. and Syahrullail, S. and Razak, D. M. and Azwadi, C. S. N. (2016) Influence of micro-pits on sliding motion under low speeds for block-on-disk tribotester. Particulate Science and Technology, 34 (6). pp. 754-763. ISSN 0272-6351

Nurul, M. A. and Syahrullail, S. and Teng, H. W. (2016) Alternative lubricants: study on palm oil-based lubricants in metal forming process. Journal of Oil Palm Research, 28 (1). pp. 93-103.

Nurul, M. A. and Syahrullail, S. and Teng, H. W. (2016) Alternative lubricants: study on palm oil-based lubricants in metal forming process. Journal of Oil Palm Research, 28 (1). pp. 93-103. ISSN 1511-2780

Nusyirwan, I. F. and Kung, Z. Y. (2016) Aircraft nonlinear optimal control using fuzzy gain scheduling. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Naffouti, T. and Zinoubi, J. and Che Sidik, N. A. and Maad, R. B. (2016) Applied thermal lattice Boltzmann model for fluid flow of free convection in 2-D enclosure with localized two active blocks: heat transfer optimization. Journal of Applied Fluid Mechanics, 9 (1). pp. 419-430.

O

Ohka, M. and Nomura, R. and Yussof, H. and Zahari, N. I. (2016) Development of human-fingertip-sized three-axis tactile sensor based on image data processing. In: 9th International Conference on Sensing Technology, ICST 2015, 8-11 Dec 2015, Auckland, New Zealand.

Oktaviandri, M. and Hassan, A. and Shaharoun, A. M. (2016) Generation of look-up tables for dynamic job shop scheduling decision support tool. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

P

Permatasari, Rosyida and Mohd. Jaafar, Mohammad Nazri (2016) The carbon monoxides reduction and temperature profile of palm shell and palm fiber combustion in fluidized bed combustor. In: AIP Conference Proceedings, 2016, Indonesia.

Piroozfard, H. and Wong, K. Y. and Asl, A. D. (2016) A hybrid harmony search algorithm for the job shop scheduling problems. In: 8th International Conference on Advanced Software Engineering and Its Applications, ASEA 2015, 25-28 Nov 2015, Jeju Island, South Korea.

Piroozfard, Hamed and Wong, Kuan Yew and Wong, Wai Peng (2016) Minimizing total carbon footprint and total late work criterion in flexible job shop scheduling by using an improved multi-objective genetic algorithm. Resources, Conservation and Recycling . ISSN 0921-3449 (In Press)

Pourtousi, M. and Poo, Balan Ganesan and Sandaran, Shanti Chandran and Sahu, J. N. (2016) Effect of ring sparger diameters on hydrodynamics in bubble column: a numerical investigation. Journal Of The Taiwan Institute Of Chemical Engineers, 69 . pp. 14-24. ISSN 1876-1070

Putri, N. T. and Sha'Ri Mohd., Y. and Irianto, D. (2016) Comparison of quality engineering practices in Malaysian and Indonesian automotive related companies. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

R

Rahim, S. Z. A. and Sharif, S. and Zain, A. M. and Nasir, S. M. and Mohd Saad, R. (2016) Improving the quality and productivity of molded parts with a new design of conformal cooling channels for the injection molding process. Advances in Polymer Technology, 35 (1). ISSN 0730-6679

Rahman, M. M. and Paatero, J. V. and Lahdelma, R. and Wahid, M. A. (2016) Multicriteria-based decision aiding technique for assessing energy policy elements-demonstration to a case in Bangladesh. Applied Energy, 164 . pp. 237-244. ISSN 0306-2619

Rahman, Md. Mizanur and Paatero, Jukka V. and Landelma, Risto and Wahid, Mazlan A. (2016) Multicriteria-based decision aiding technique for assessing energy policy elements-demonstration to a case in Bangladesh. Applied Energy, 164 . pp. 237-244. ISSN 0306-2619

Razak, D. M. and Samion, S. and Noorawzi, N. and Azli, Y. (2016) A new tribological approach for lubricated sliding contact of pitted metallic curvature cup. Tribology Transactions, 59 (5). pp. 876-882. ISSN 1040-2004

Razak, D. M. and Syahrullail, S. and Sapawe, N. and Azli, Y. and Nuraliza, N. (2016) A new tribological approach on metal cup with optimized pits model using spark discharge machine. Particulate Science and Technology, 34 (2). pp. 209-216. ISSN 0272-6351

Reza Hassanzadeh, A. and Yaakob, O. B. and Ahmed, Y. M. and Arif Ismail, M. (2016) Numerical simulation for unsteady flow over marine current turbine rotors. Wind and Structures, An International Journal, 23 (4). pp. 301-311. ISSN 1226-6116

Rezaei, Ghasem and Mardani, Abbas and Senin, Aslan Amat and Wong, Kuan Yew and Sadeghi, Laleh and Najmi, Manoochehr and Shaharoun, Awaluddin Mohamed (2016) Relationship between culture of excellence and organisational performance in Iranian manufacturing companies. Total Quality Management and Business Excellence . pp. 1-22. ISSN 1478-3363 (In Press)

Rezaei-Dashtarzhandi, M. and Ismail, A. F. and Goh, P. S. and Wan Azelee, I. and Abbasgholipourghadim, M. and Ur Rehman, G. and Matsuura, T. (2016) Zeolite ZSM5-filled PVDF hollow fiber mixed matrix membranes for efficient carbon dioxide removal via membrane contactor. Industrial and Engineering Chemistry Research, 55 (49). pp. 12632-12643. ISSN 0888-5885

S

Sadeghi, Omidreza and Mohammed, Hussein A. and Bakhtiari-Nejad, Marjan and Wahid, Mazlan Abdul (2016) Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts. International Communications in Heat and Mass Transfer, 71 . pp. 234-244. ISSN 0735-1933

Sadiq, T. O. and Fadara, T. G. and Aiyedun, Aiyedun and Idris, J. (2016) Numerical estimation of rolling load and torque for hot flat rolling of Hcss316 at low strain rates based on mean temperature. International Journal Of Engineering Research In Africa, 26 . pp. 11-29. ISSN 1663-3571

Salleh, Sideq and Izman, Sudin and Awang, Arobi (2016) Effects of non-spherical colloidal silica slurry on Al-NiP hard disk substrate CMP application. Applied Surface Science, 360 . pp. 59-68. ISSN 0169-4332

Salman, B. H. and Mohammed, H. A. and Kherbeet, A. Sh. (2016) Numerical Study of Three Different Approaches to simulate nanofluids flow and heat transfer in a microtube. Heat Transfer-Asian Research, 45 (1). pp. 46-58. ISSN 1099-2871

Samiran, N. A. and Jaafar, M. N. M. and Ng, J. H. and Lam, S. S. and Chong, C. T. (2016) Progress in biomass gasification technique - with focus on Malaysian palm biomass for syngas production. Renewable and Sustainable Energy Reviews, 62 . pp. 1047-1062. ISSN 1364-0321

Samiran, N. A. and Ng, J. H. and Mohd. Jaafar, M. N. and Valera-Medina, A. and Chong, C. T. (2016) H2-rich syngas strategy to reduce NOx and CO emissions and improve stability limits under premixed swirl combustion mode. International Journal of Hydrogen Energy, 41 (42). pp. 19243-19255. ISSN 0360-3199

Sapawe, N. and Samion, S. and Zulhanafi, P. and Nor Azwadi, C. S. and Hanafi, M. F. (2016) Effect of addition of tertiary-butyl hydroquinone into palm oil to reduce wear and friction using four-ball tribotester. Tribology Transactions, 59 (5). pp. 883-888. ISSN 1040-2004

Saud, Safaa Najah and Hamzah, Esah and Abu Bakar, Tuty Asma and Bakhsheshi-Rad, Hamid Reza and Hosseinian, Raheleh (2016) X-phase precipitation in aging of Cu-Al-Ni-xTi shape memory alloys and its influence on phase transition behavior. Journal of Thermal Analysis and Calorimetry, 123 (1). pp. 377-389. ISSN 1388-6150

Saud, S. N. and Hamzah, E. and Abubakar, T. and Bakhsheshi-Rad, H. R. and Mohammed, M. N. (2016) Influence of tin additions on the phase-transformation characteristics of mechanical alloyed Cu-Al-Ni shape-memory alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (10). pp. 5242-5255. ISSN 1073-5623

Saud, S. N. and Raheleh Hosseinian, S. and Bakhsheshi-Rad, H. R. and Yaghoubidoust, F. and Iqbal, N. and Hamzah, E. and Ooi, C. H. R. (2016) Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid. Materials Science and Engineering C, 68 . pp. 687-694. ISSN 0928-4931

Saud, Safaa and Hosseinian S., Raheleh and Bakhsheshi-Rad, Hamid Reza and Yaghoubi Doust, Fatemeh and Iqbal, Nida and Hamzah, Esah and Ooi, C. H. Raymond (2016) Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid. Materials Science and Engineering C, 68 . pp. 687-694. ISSN 0928-4931

Senawi, M. Y. and Mahmod, F. W. (2016) Simulation of a simple vapour-compression refrigeration system using R134a. Jurnal Teknologi, 78 (9-2). pp. 25-31. ISSN 0127-9696

Senawi, Mohd. Yusoff and Mahmod, Farah Wahidah (2016) Simulation of a simple vapour-compression refrigeration system using R134a. Jurnal Teknologi, 78 (9-2). pp. 25-31. ISSN 0127-9696

Shafie, N. A. M. and Said, M. F. M. and Aziz, A. A. and Latiff, Z. A. and Yamin, A. K. M. and Tamaldin, N. (2016) Steady flow and dynamic analyses comparison of an air intake breathing capacity. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Shafie, N. E. A. and Kamar, H. M. and Kamsah, N. (2016) Effects of air supply diffusers and air return grilles layout on contaminants concentration in bus passenger compartment. International Journal of Automotive Technology, 17 (5). pp. 751-762. ISSN 1229-9138

Sharif, Nik Mohamad and Mohd. Ghazali, Normah (2016) Performance of a multi-stack microchannel heat sink. Jurnal Teknologi, 78 (10-2). pp. 61-68. ISSN 0127-9696

Sharif, N. M. and Ghazali, N. M. (2016) Performance of a multi-stack microchannel heat sink. Jurnal Teknologi, 78 (10-2). pp. 61-68. ISSN 0127-9696

Shin, Chin Yung and Mohd. Ghazali, Normah (2016) CFD simulation of a plate heat exchanger with trapezoidal chevron. Jurnal Teknologi, 78 (8-4). pp. 19-24. ISSN 0127-9696

Shirdar, Mostafa Rezazadeh and Izman, Sudin and Taheri, Mohammad Mahdi and Assadian, Mahtab and Abdul Kadir, Mohammed Rafiq (2016) Effect of electrophoretic deposition parameters on the corrosion behavior of hydroxyapatite-coated cobalt–chromium using response surface methodology. Arabian Journal for Science and Engineering, 41 (2). pp. 591-598. ISSN 1319-8025

Shirdar, Mostafa Rezazadeh and Izman, Sudin and Taheri, Mohammad Mahdi and Assadian, Mahtab and Abdul Kadir, Mohammed Rafiq (2016) Effect of electrophoretic deposition parameters on the corrosion behavior of hydroxyapatite-coated cobalt-chromium using response surface methodology. Arabian Journal for Science And Engineering, 41 (2). pp. 591-598. ISSN 1319-8025

Sidik, N. A. C. and Samion, S. and Musa, M. N. and Muhammad, M. J. and Muhammad, A. I. and Yazid, M. N. A. W. M. and Mamat, R. (2016) The significant effect of turbulence characteristics on heat transfer enhancement using nanofluids: a comprehensive review. International Communications in Heat and Mass Transfer, 72 . pp. 39-47. ISSN 0735-1933

Sing, N. B. and Mostavan, A. and Hamzah, E. and Mantovani, D. and Hermawan, H. (2016) Degradation behavior of biodegradable Fe35Mn alloy stents. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 103 (3). pp. 572-577. ISSN 1552-4973

Singh, S. and Olugu, E. U. and Musa, S. N. and Mahat, A. B. and Wong, K. Y. (2016) Strategy selection for sustainable manufacturing with integrated AHP-VIKOR method under interval-valued fuzzy environment. International Journal of Advanced Manufacturing Technology, 84 (1-4). pp. 547-563. ISSN 0268-3768

Siow, Chee Loon and Koto, Jaswar (2016) Wave energy for electricity generation in Malaysia - Merang shore, Terengganu. International Journal of Environmental Research & Clean Energy, 4 (1). pp. 8-18. ISSN 2502-3888

Siswanto, W. A. and Nagentrau, M. and Mohd. Tobi, A. L. and Tamin, M. N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30 (11). pp. 5093-5101. ISSN 1738-494X

Souf Aljen, Atef Salem Meftah and Abdul Malik, Adi Maimun and Rahimuddin, Rahimuddin and Mohamad, Noor Zairie (2016) Port capacity forecasting and the impact of the dredging works on port sea operations using discrete event simulation. Jurnal Teknologi, 78 (9-4). pp. 31-40. ISSN 01279696

Suhaimi, Mohd. Azlan and Mat Ghani, Firdaus and Mohd. Taib, Jamaludin and Md. Tap, Masine (2016) Generalization of mathematical representation for tool path based on boundary representation (BREPS) data structure. Jurnal Teknologi, 78 (1). pp. 159-167. ISSN 0127-9696

T

Tafti, Atefeh Ayatollahi and Idris, Jamaliah (2016) Microwave assisted hydroxyapatite deposition coating on AZ31 magnesium alloy. In: Fourth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM, 2016, United Kingdom.

Taheri, Mohammad Mahdi and Rezazadeh Shirdar, Mostafa and Keyvanfar, Ali and Shafaghat, Arezou (2016) Evaluating hydrothermal synthesis of fluorapatite nanorods: pH and temperature. Journal of Experimental Nanoscience . pp. 1-11. ISSN 1745-8080 (In Press)

Thangavelu, S. K. and Ahmed, A. S. and Ani, F. N. (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 40 (12). pp. 1704-1711. ISSN 0363-907X

Thangavelu, Saravana Kannan and Ahmed, Abu Saleh and Ani, Farid Nasir (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 40 (12). pp. 1704-1711. ISSN 0363-907X

Ting, Rickey Pek Eek and Mat Darus, Intan Zaurah and Sahlan, Shafishuhaza and Mohd. Samin, Pakharuddin and Shaharuddin, Nik Mohd Ridzuan (2016) Implementation of swarm algorithm in modeling a flexible beam structure. Journal of Vibroengineering, 18 (8). pp. 4914-4934. ISSN 1392-8716

V

van der Heiden, P. and Pohl, C. and Mansor, S. and van Genderen, J. (2016) Necessitated absorptive capacity and metaroutines in international technology transfer: a new model. Journal of Engineering and Technology Management - JET-M, 41 . pp. 65-78. ISSN 0923-4748

Vanaki, Sh. M. and Ganesan, R. and Mohammed, H. A. (2016) Numerical study of convective heat transfer of nanofluids: a review. Renewable & Sustainable Energy Reviews, 54 . pp. 1212-1239. ISSN 1364-0321

W

Wong, K. J. and Gong, X. J. and Aivazzadeh, S. and Tamin, M. N. (2016) Moisture effects on patch bonded composite repairs. In: International Conference on Materials Engineering and Nanotechnology, ICMEN 2016, 21 - 23 May 2016, Taipei, Taiwan.

Wong, K. J. and Khoo, S. J. and Low, K. O. (2016) Influence of alkali treatment on the interfacial properties of bamboo/polyester composites. Recent Patents on Mechanical Engineering, 9 (3). pp. 247-254. ISSN 1874-477X

Wong, K. J. and Low, K. O. and Israr, H. A. and Tamin, M. N. (2016) Thickness-dependent non-Fickian moisture absorption in epoxy molding compounds. Microelectronics Reliability, 65 . pp. 160-166. ISSN 0026-2714

Y

Y. M., Fadzli and Mohd. Yusof, Nor Fasiha and F. N., Norlisa (2016) Relationship between eye behaviour during conceptual stage design process and the level of creativity. In: First Multidisciplinary Conference on Mechanical Engineering (MCME2016), 29 Nov 2016, Johor, Malaysia.

Yahaya, Bashir and Izman, Sudin and Idris, Mohd. Hasbullah and Dambatta, Murtala Sule (2016) Effects of activated charcoal on physical and mechanical properties of microwave dewaxed investment casting moulds. CIRP Journal of Manufacturing Science and Technology, 13 . pp. 97-103. ISSN 1755-5817

Yengejeh, Mortaza Azizi and Amiri, Mojtaba Maali and Mehdigholi, Hamid and Seif, Mohammad Saeed and Yaakob, Omar (2016) Numerical study on interference effects and wetted area pattern of asymmetric planing catamarans. Proceedings Of The Institution Of Mechanical Engineers Part M-Journal Of Engineering For The Maritime Environment, 230 (2). pp. 417-433. ISSN 1475-0902

Yousif, Q. A. and Mohd. Ghazali, N. and Zolpakar, N. A. and Novianto, S. and Pamitran, A. S. and Ahmad, R. (2016) Modeling of the minimized two-phase flow frictional pressure drop in a small tube with different correlations. Jurnal Teknologi, 78 (6-11). pp. 109-115. ISSN 0127-9696

Yusof, N. M. and Razavykia, A. and Farahany, S. and Esmaeilzadeh, A. (2016) Effect of modifier elements on machinability of Al-20Mg2Si metal matrix composite during dry turning. Machining Science and Technology, 20 (3). pp. 460-474. ISSN 1091-0344

Yusri, I. M. and Mamat, R. and Azmi, W. H. and Najafi, G. and Sidik, N. A. C. and Awad, O. I. (2016) Experimental investigation of combustion, emissions and thermal balance of secondary butyl alcohol-gasoline blends in a spark ignition engine. Energy Conversion and Management, 123 . pp. 1-14. ISSN 0196-8904

Z

Zahari, Siti Norazila and Mohd. Sani, Mohd. Shahrir and Abu Husain, Nurulakmar and Ishak, Mahadzir and Zaman, Izzuddin (2016) Dynamic analysis of friction stir welding joints in dissimilar material plate structure. Jurnal Teknologi, 78 (42530). pp. 57-65. ISSN 0127-9696

Zahraee, Seyed Mojib (2016) A survey on lean manufacturing implementation in a selected manufacturing industry in Iran. International Journal of Lean Six Sigma, 7 (2). pp. 136-148. ISSN 2040-4166

Zainal, M. T. and Mohd. Yasin, M. F. and Wahid, M. A. (2016) Investigation of the coupled effects of temperature and partial pressure on catalytic growth of carbon nanotubes using a modified growth rate model. Materials Research Express, 3 (10). ISSN 2053-1591

Zainal, Muhammad Thalhah and Mohd. Yasin, Mohd. Fairus and Abdul Wahid, Mazlan (2016) Optimizing flame synthesis of carbon nanotubes: experimental and modelling perspectives. Jurnal Teknologi, 78 (8-4). pp. 133-145. ISSN 0127-9696

Zainol, I. and Yaakob, O. (2016) Use of diesel engine and surface-piercing propeller to achieve fuel savings for inshore fishing boats. Journal of Marine Science and Application, 15 (2). pp. 214-221. ISSN 1671-9433

Zainol, Z. N. and Tap, M. M. (2016) Heat transfer through fire fighter's protective clothing exposed to thermal radiation. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 - 10 Mac 2016, Kuala Lumpur, Malaysia.

Zamberi, M. M. and Ani, F. N. and Abdollah, M. F. (2016) Heterogeneous transesterification of rubber seed oil biodiesel production. Jurnal Teknologi, 78 (6-10). pp. 105-110. ISSN 0127-9696

Zolfagharian, Ali and Valipour, Peiman and Ghasemi, Seyed Ebrahim (2016) Fuzzy force learning controller of flexible wiper system. Neural Computing and Applications, 27 (2). pp. 483-493. ISSN 0941-0643

Zolpakar, Nor Atiqah and Mohd. Ghazali, Normah (2016) Optimization of a thermoacoustic refrigerator with an evolutionary algorithm approach. Jurnal Teknologi, 78 (9-2). pp. 19-24. ISSN 0127-9696

Zuan, A. M. S. and Yong, S. Y. and Nurul, M. A. and Syahrullail, S. and Rahim, E. A. (2016) The effects of the die half angle of taper die on plane strain extrusion. Jurnal Teknologi, 78 (9-2). pp. 45-51. ISSN 0127-9696

This list was generated on Thu Nov 23 06:12:48 2017 +08.