Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y
Number of items: 155.

A

Abd. Malik, Adi Maimin and Jamei, Saeed and Priyanto, Agoes and Che Sidik, Nor Azwadi (2010) Aerodynamic characteristics of wing of WIG catamaran vehicle during ground effect. WSEAS Transactions on Fluid Mechanics, 5 (3). 196 - 205. ISSN World Scientific and Engineering Academy and Society

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran (2010) Using imperialist competitive algorithm to find the optimum shape design of internally pressurized torispherical dome ends based on buckling pressure. International Journal of Engineering (IJE), 4 (5). pp. 387-398. ISSN 1985-2312 (Online)

Abdolahi , Hamed (2010) Effects of annealing on structure and magnetic properties of semiconductors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azliza (2010) Development of a ducted horizontal axis marine current turbine rotor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kadir, Aini Zuhra and Xua, Xun and Hämmerle, Enrico (2010) Virtual machine tools and virtual machining-a technological review. Robotics and Computer-Integrated Manufacturing, 27 (3). pp. 494-508. ISSN 0736-5845

Abdul Kadir, Mohammed Rafiq (2010) Biomechanics of a lumbar section after disc arthroplasty. European Journal of Scientific Research, 39 (1). 22 - 28.

Abdul Rahim, Nurul Ataillah and Ahmad, Robiah (2010) Biomechanical study and analysis on human motion using piezoelectric sensor for scavenging energy. Jurnal Mekanikal (31). pp. 30-45. ISSN 0127-3396

Abdullah, Arman Shah (2010) Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abraham, Arimokwu (2010) Numerical simulation of standing wave in an acoustic chamber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Abd. Rahim and Ouyang, Huajiang and Lee, Chiing Khaia and Abdullah, Mohd. Shahrulizam (2010) Thermal analysis of a disc brake model considering a real brake pad surface and wear. International Journal of Vehicle Structures & Systems , 2 (1). pp. 20-27. ISSN 0975-3060

Adnan, Fadzilah (2010) Work improvement at an engine assembly line at car manufacturing plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Mohamed Shaharoun, Awaluddin (2010) EDAS: software for end-of-life disassembly analysis. International Journal of Sustainable Design, 1 (3). 257 . ISSN 1743-8284 (Print); 1743-8292 (Electronic)

Afrooz, Iman Eslami (2010) Numerical investigation of composite materials with short fibers made of carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Fauzi and Hudha, Khisbullah and Imaduddin, Fitrian and Jamaluddin, Hishammudin (2010) Modelling, validation and adaptive pid control with pitch moment rejection of active suspension system for reducing unwanted vehicle motion in longitudinal direction. International Journal of Vehicle Systems Modelling and Testing (IJVSMT), 5 (4). pp. 312-345. ISSN 1745-6444

Ahmad, Robiah and Mohd. Nor, Mohamad Fitri (2010) Parameter estimation of nonlinear discrete-time dynamic systems using genetic algorithm. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 97-120. ISBN 978-983-52-0545-3

Ahmad , Nurul Huda (2010) Finite element simulation of preforated hollow sphere composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahrari, Ayoob (2010) Application of design of experiment technique in the nickel-chromium electroplating process on WC-Co substrate prior HFCVD diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alir , Kartini (2010) The effects of musculoskeletal disorder on drivability among compact car drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alizadeh , Mina (2010) Biomechanical evaluation of spine posterior rigid fixations : a finite element study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ang, Liqi (2010) Simulation of sequencing rules in a five-similar-machine job shop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arshad Adam, Salema and Ani, Farid Nasir (2010) Microwave pyrolysis of oil palm fibres. Jurnal Mekanikal : An International Journal (30). pp. 77-86. ISSN 0127-3396

Azraie, Salahuddin (2010) Numerical simulation of heat transfer in blood vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Baharanchi , Ahmadreza Abbasi (2010) Simulation of turbulent swirling multiphase flow inside a pressure -swirl atomizer using volume of fluid model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behnam , Sarah (2010) Development of biomechanical risk assessment technique in patient handling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Boo, Nan Shing (2010) Interfacial reactions between lead- free solders and electroless nickel/ immersion gold (ENIG) surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Che Ani , Mohd. Norzaimi (2010) Implementations of lean production system in manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidik, Nor Azwadi and Nor Hamizan, M. S. and Ammar, N. M. (2010) Assessment of lattice boltzmann simulation scheme in predicting two-phase (Solid-Fluid) flow. Jurnal Mekanikal (31). pp. 11-16. ISSN 0127-3396

Cherraghizanjani, Alireza (2010) Development of measurement and behavior classification in tremor patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chong, Kuan Eng (2010) Technology entrepreneur development at graduate training in Malaysia institute of higher learning. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Chong , Ban Hwa (2010) Sustainable furniture design concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ch’Ng Emily, Huey Ling (2010) Musculoskeletal disorders among offshore-structure fabrication yard workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

E

Eldrainy, Yehia A. and Aly, Hossam S. and Saqr, Khalid M. and Mohd. Jaafar, Mohammad Nazri (2010) A multiple inlet swirler for gas turbine combustors. International Journal of Mechanical Systems Science and Engineering, 2 (2). pp. 106-109. ISSN 1307-7473

Elia, Zulkifli (2010) Performance evaluation of lightning protection design software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Esfroshani, Mahdi Ramezanzadeh (2010) Analytical method for noise reduction of tire using wave propagation approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Eslami Harandi, Shervin (2010) The effect of calcium content and forging parameters on the properties of biodegradable MG-CA alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Etminan, Payam (2010) Design and development of diamond grinding wheel for ultra precision applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

F

Fallahiarezoodar , Ali (2010) Design and kinematic analysis of high flex knee implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farsadi, Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes wav. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farsadi , Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes waviness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fiedler, Thomas and Belova, Irina V. and Ochsner, Andreas and Murch, Graeme E. (2010) Review on thermal lattice Monte Carlo analysis. In: Current Trends in Chemical Engineering. Studium Press LLC, USA, pp. 105-130. ISBN 193-369-975-2

Fouladinejad, Nariman (2010) Visual database design for driving simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fouladinejad , Nima (2010) Intelligent traffic flow simulation system on a small scale environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G

Gan, Teik Kun (2010) Decision making for capacity planning in a make-to-order company using mixed integer programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghosh, Pradip and Yusop, M. Zamri and Satoh, Syunsaku and Subramanian, Munisamy and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2010) Transparent and flexible field electron emitters based on the conical nanocarbon structures. Journal of the American Chemical Society, 132 (12). pp. 4034-4035. ISSN 0002-7863

Golrang, Mehdi (2010) Design for recycling methodology for rapid manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

H

Halim , Shamsul Azwan (2010) Simulation of plastic injection moulding part using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haminudin, Nor Faizah (2010) Center pressure for bio-based lubricant in elastohydrodynamic lubrication of rectangular conjuction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Harudin , Nolia (2010) Preventive maintenance improvement at epoxy cure operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemi Dehkordi , Sayed Mahdi (2010) Friction induced vibration and its prevention using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemiyan, Zahra (2010) Develop single frequency in bioelectric impedance analysis device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Mohd. Hanifah (2010) Development of energy harvesting device using piezoelectric material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim , Ahmad Safwan (2010) Roll reduction device for small fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heidari , Milad (2010) Development of elbow prosthesis for total elbow arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hermawan, Hendra and Dube, D. and Mantovani, D. (2010) Degradable metallic biomaterials for cardiovascular applications. In: Metals for Biomedical Devices. Woodhead Publishing Limited, Oxford, United Kingdom, pp. 379-404. ISBN 978-1-84569-434-0

Hosseini, S. M. H. and Ochsner, Andreas and Merkel, M. and Fiedler, T. (2010) Predicting the effective thermal conductivity of Perforated Hollow Sphere Structures (PHSS). In: Current Trends in Chemical Engineering. Studium Press LLC, India, pp. 131-151. ISBN 1933699752

Hosseini , Nima Babazadeh (2010) Simulation of microchannel heat sink with hotspot(s). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husain , Mohamad Fazli (2010) Microbiology influenced corrosion of carbon steel and stainless steel by bacterium, pseudomonas aeruginosa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, Fadi Faris (2010) Effect of strontium modification and and AL-TI-B grain refiner on microstructure and properties of cast LM6 alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussin, M. H. and Abu Bakar, A. R. and Jamaluddin, M. R. and Szlapka, R. (2010) Effects of lining thickness on squeal in drum brake assembly: experimental investigations. Int. J. Vehicle Structures & Systems, 2 (2). 69 -73. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Hussin, Norasikin (2010) Occupational safety and health improvement at casting plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

Ibrahim, Alia (2010) Elastohydrodynamic lubrication for bio-based lubricants in rectangular conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

J

Jafari, Sajjad (2010) Hydroxyapatite coating on metallic biomaterials prepared by sol-gel method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahangiri , Amirreza (2010) Investigation on A1-Mg2Si MMC TIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahwie , Nurasyikin (2010) Study on car body kit design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Rahman, M. N. A. and Murtadhahadi, Murtadhahadi and Ahmad, S. and Ibrahim, M. H. I. and Nor, N. H. M. (2010) Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction. Advanced Materials Research, 83-86 . pp. 945-952. ISSN 1022-6680

K

Kamaruddin, Aisyah Nabilah (2010) Mixed integer programming (mip) model for production scheduling in an automotive part company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khoei, Mohammadreza (2010) Supply chain management information system (SCMIS) a case study in vamco (Axle Manufacturing Factory). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

King Jye, Wong and B. F., Yousif and K. O., Low (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Koleini, Shahriar (2010) The properties of hot rolled binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Krishnan, Subramaniam and Ahn, Sang-Hee and Lee, Choong-Won (2010) Design and development of a hydrogen-peroxide rocket-engine facility. Jurnal Mekanikal : An International Journal (30). pp. 24-36. ISSN 0127-3396

L

Lai, Cing Xin (2010) Transient solution to fluid flow in cavity with stretched coordinae system using constrained interpolated profile navier stokes equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lani, Norziana (2010) High speed nickel plating on difficult to plate metal(Aluminium). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Meng Hee (2010) Application of wavelet transform analysis for the diagnosis of blade faults in rotating machinery. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loghmanian, Sayed Mohammad Reza (2010) Structure optimization of dynamic system model using multi - objective genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loh, Chee Kin (2010) Simulation of natural convection heat transfer in an enclosed cavity using Constrained Interpolated Profile Navier-Stokes Equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Low , Kok Wai (2010) Reliability of passive hull systems on floating production system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lv, Ya (2010) Development of simulation software for simulating the interactive control of manipulators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. Yusup, Eliza (2010) Evaluation of an active force control for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Madhloom Al-Khafaji, Ali Abdulhussain (2010) System identification of flexible plate structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahmod, Hamzah (2010) Design of a low cost concrete rooftile making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (3). pp. 336-355. ISSN 1450-216X

Mat Darus, Intan Zaurah and Lokaman, Zainul Aman (2010) Dynamic modelling of twin rotor multi system in horizontal motion. Jurnal Mekanikal (31). pp. 17-29. ISSN 0127-3396

Mat Dzahir, Mohd. Azwarie (2010) Remote control of hand arm robotic system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Dzahir , Mohd. Azuwan (2010) Development of assistive robotic arm for stroke rehabilitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Nuri @ Md. Din , Nur Rashid (2010) Numerical simulation of aerodynamics effect on an automotive side mirror. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Sahat, Idris (2010) A numerical analysis of two dimensional lid driven cavity flow using cubic interpolated pseudo-particle method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, Muhamad Zameri and Afrinaldi, Feri and Zakuan, Norhayati and Blount, Gordon and Goodyer, Jane and Jones , Ray and Jawaid, Ashraf (2010) Strategic guidance model for product development in relation with recycling aspects for automotive products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063 (Print);1913-9071 (Electronic)

Mat Yajid, Muhamad Azizi and Bagshaw, H. and Mobus, G. (2010) In situ and ex situ transmission electron microscopy investigation of Cu-Al-Cu-Ti reactive metallic multilayer coatings. Journal Of Materials Research, 25 (6). 1196 - 1203. ISSN 0022-2461

Md. Lazin @ Md. Lazim , Md. Norazlan (2010) Natural ventilation tropical greenhouse (nvtg) modeling and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, Mohd. Zarhamdy and As’arry, Azizan and Kazi, Suhail and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus (2010) Development of experimental-rig for human postural tremor behaviour. International Journal of Human Factors Modelling and Simulation, 1 (3). pp. 339-351. ISSN 1742-5549

Milani , Kaveh (2010) Operational competitivness index for Malaysian container ports. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirshahi, Mohammad (2010) The properties of hot extruded binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Mohd. Nazri (2010) Simulation and experimental study of vibration control using smart material for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Ali Mohammed Sultan, (2010) Techno-economic analysis of compressed natural gas carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Nazari, Munira (2010) Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Badri , Mohd. Najib (2010) Simulation of plastic injection moulding of family mould using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jamir, Mohd. Ridzuan (2010) Experimental investigation of minimum quantity lubricant (MQL) in cold forward extrusion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Rohani, Jafri and Mohd. Yusof, Sha’ri and Mohamad, Ismail (2010) The development of a survey instrument for measuring a relationship between statistical process control success factors and performance. Jurnal Mekanikal : An International Journal (30). pp. 1-16. ISSN 0127-3396

Mohd. Salleh, Zuan Azhary (2010) Heat stress on 500-660 mm pipe workers in oil rig jackets assembly welding works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Salleh, Zuliazura (2010) Analysis on the flow and pressure distribution for actual stenosis in trachea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Samin, Pakharuddin (2010) Hybrid stability augmentation system-force control of semi-active suspension with magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohd. Samsuri, Saiful Farhan (2010) Modeling of environmental climates inside naturally ventilated tropical greenhouse. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Senusi, Shahrullizam (2010) Solar absorption thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yahya, Nur Hayati (2010) The effect of visual viewing geometry on computer monitor user. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusoff, Sabariah (2010) Ergonomic assessment in an assembly plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokhtar, Kamran (2010) Application of clad/unclad optical fiber in the corrosion studies of reinforced concrete rebars. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mozafari, Hamid and Abdi, Behzad and Ayob, Amran (2010) Optimization of composite plates based on imperialist competitive algorithm. International Journal on Computer Science and Engineering, 2 (9). pp. 2816-2819. ISSN 2229-5631 (Print); 0975-3397 (Online)

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Influence of thickness variation on the buckling load in plates made of functionally graded materials. European Journal of Scientific Research, 47 (3). pp. 422-435. ISSN 1450-216X

Mozafari, Hamid and Hassanipour, Meysam and Ayob, Amran (2010) Investigation of thickness and thermal treatments on the deep drawing process for the aluminum plate. International Journal of Engineering Science and Technology, 2 (10). pp. 5915-5920. ISSN 0975-5462

N

Niakan , Ali Asghar (2010) Lost foam casting of LM6-A1-Si cast alloy under pressure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

O

Ochsner, Andreas (2010) Plasticity of three-dimensional foams. In: Cellular and Porous Materials in Structures and Processes. CISM International Centre for Mechanical Sciences, 521 . Springer Vienna, New York, pp. 107-166. ISBN 978-3-7091-0296-1

Ochsner, Andreas and Hosseini, Seyed Mohammad Hossein (2010) Constitutive modeling of the mechanical behavior of trabecular bone - continuum mechanical approaches. In: Biomechanics of Hard Tissues: Modelling, Testing, and Materials. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp. 159-191. ISBN 978-352-732-431-6

P

Poh, Ping Em and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2010) Automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Advanced Mechatronic Systems, 2 (5/6). pp. 350-368. ISSN 1756-8412 (Print); 1756-8420 (Electronic)

Prawoto, Yunan and Jern, Phye Tan and Choon, Yong Loh (2010) Effect of microstructures and material compositions on blister formation. Materials Sciences and Applications, 1 (3). pp. 158-161. ISSN 2153-117X (Print); 2153-1188 (Electronic)

R

Rafati , Mahdi Zhaleh (2010) Numerical simulation of fluid flow and heat transfer in a trapezoidal microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). 59 - 71. ISSN 17456436

Ramli, Yahaya (2010) Introduction to compressed air systems. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0728–0

Rasul, Mohamad Sattar and Ismail, Mohd. Yusof and Ismail, Napsiah and Rajuddin, Muhammad Rashid and Abd. Rauf, Rose Amnah (2010) Development of employability skills assessment tool for manufacturing industry. Jurnal Mekanikal : An International Journal (30). pp. 48-61. ISSN 0127-3396

S

S. Alyami, Saad Rabia (2010) The effect of coconut dust addtion on the properties of green sand and investment casting moulds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saad Elmunafi, Mohamed Handawi (2010) Performance evaluation of wiper coated ceramic tool when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Saaran, Idris (2010) Effect of different pretreatment parameters on silicon nitride substrate surface roughness prior to diamond deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safari, Habiballah (2010) Effect of two-step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said Ali @ Syed Ali, Sharifah Aznee (2010) Analysis of slips and falls among workers at workplace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saleh, Alireza Tavakolpour (2010) Mechatronic design of intelligent active vibration control systems for flexible structures. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Salimnezhadghareziaeddini, Aida (2010) Information system in out-patient clinic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salimon , Norhidayah (2010) Optimum strategy for the implementation of a decentralized distribution network for industrialised building system (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samion, Syahrullail and Kamitani, S. and Nakanishi, K. (2010) Experimental evaluation of RBD palm olein as lubricant in cold metal forming. Jurnal Mekanikal (31). pp. 1-10. ISSN 0127-3396

Sari , Mehdi Mohammadzadeh (2010) Machinablity of aisih 13 tool steel when using the edm process with carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaari, Mohd. Rosmani (2010) Effect of edge preparation when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahani , Pouria (2010) Implementation of composite bar and beam element into a commercial finite element code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shayganpour, Amirreza (2010) Evaluation of significant factors in aluminum lost foam casting using doe approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirazi, Arash Nasrollahi (2010) Finite element simulation of three surgical treatments of distal radius intra-articular fracture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sivalinggam, Thibagaran (2010) Yield improvement in glass manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soleimani, Mohammad (2010) Numerical and experimental investigation of synthetic biogas pulse combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, O. and Abd Kader, Ab Saman and Saharuddin, A. H. and Wan Nik, W. B. and Samo, K. B. (2010) Safety and environmental risk and reliability modeling process for sustainable inland water transportation. Journal of Marine Environmental Engineering , 9 (2). pp. 145-173. ISSN 1061-026X

Sulaiman , Mohd. Hafis (2010) Numerical simulation of cold forward extrusion for aluminum A 1100. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman , Syazana (2010) Process improvement at an engine assembly production line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suprayogi, Dedy Triawan (2010) Savonius rotor vertical axis marine current turbine for renewable energy application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

T

Taghavisangdehi, Seyedhamed (2010) Effect of adding carbon nano tube into dielectric when edming titanium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Boon Ann (2010) The characteristics of impinging flame and its effects on the heat transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Joon Shyan (2010) Effects of interaction between strontium,antimony and titanium-boron on microstructure and properties of alumium alloy ai-11%(LM6). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Teh , Irene Hui Lynn (2010) Combustion and emission investigations of a diesel engine operating on palm oil derived fuels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Thien, Yung Fatt (2010) Control of piezoelectric actuator on human-like hand model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tyurebekov, Yermek (2010) Experimental study of the flow forces in the hydraulic poppet valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

U

Udoncy Olugu, Ezutah and Kuan, Yew Wong and Mohamed Shaharoun, Awaludin (2010) A comprehensive approach in assessing the performance of an automobile closed-loop supply chain. Sustainability, 2 (4). pp. 871-889. ISSN 2071-1050

W

Wai, Peng Wong and Kuan, Yew Wong (2010) Intermediate measures consideration for a value chain or multistage system: an efficiency analysis using DEA approach. In: Advances in Measurement Systems. InTech, Rijeka, Croatia, 561-574 . ISBN 978-953-307-061-2

Wan Mahmud, Wan Musa (2010) An approach of rib resign for injection moulded characteristics of a hand phone casing part by using simulation of moldflow and design of experiments (doe). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Mohamad , Wan Zulfadli (2010) Recognition of cylindrical features from 2.5D and 3D prismatic model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Yu Cheng (2010) A lean manufacturing implementation framework for the Malaysian electrical and electronics industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong , Ling Shuang (2010) Improvement techniques for reducing human error. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong , Yi Kang (2010) Field and laboratory vibration analysis for structural degradation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Y

Yaakob, Omar and Zainudin, Norazimar and Samian, Yahya and Abdul Malik, Adi Maimun and Palaraman, Robiahtul Adawiah (2010) Presentation and validation of remote sensing ocean wave data. International Journal of Research and Reviews in Applied Sciences (IJRRAS), 4 (4). pp. 373-379. ISSN 2076-734X

Yap, Gabriel Wei Phing (2010) Recognition of isolated prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yu, Zheng (2010) Recognition of interacting prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusoff , Mohd. Huzaifah (2010) Personal traits and emotions in behavioral patterns for young motorcyclist riders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

This list was generated on Wed Nov 22 23:00:03 2017 +08.