Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2004

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 85.

Ab. Wahab, Abas (2004) Establishing the wind map for Sabah and Sarawak, Malaysia. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Jamil, Saiful Bahri (2004) Performance evaluation of ceramic and PCBN cutting tools when turning hardened steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Kader, Ab. Saman (2004) Professional Engineer's Roles and Responsibility. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abd. Razak, Azli (2004) Numerical simulation of adiabatic acoustic waves in a closed rectangular chamber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azhar (2004) Cadangan bagi membangunkan sistem pengangkutan ringan halaju rendah jenis "articulating" bagi kegunaan membawa pelawat di UTM. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Rani, Mat Rebi (Penterjemah) and Bahak, Mohd. Zubil (Penterjemah) (2004) Melaksanakan pengurusan keselamatan menyeluruh: keselamatan, kesihatan, dan daya saing dalam pasaran global. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0342–3

Abdullah, Ahmad Baharuddin and Razali, Norhamimi and Mohd. Ripin, Zaidi (2004) Kajian kepuasan pelanggan terhadap produk pengguna untuk menyokong seni bina produk modular. Jurnal Mekanikal (17). pp. 1-14. ISSN 0127-3396

Abu, Risal (2004) Recognition of single machining features using rule-based technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Hossain, Khandoker and Mohd. Jaajar, Mohammad Nazri and Ani, Farid Nasir (2004) Promoted selection non-catalytic reduction: prospective technology for nitrogen oxide reduction. Asean Journal of Chemical Engineering, 4 (1). pp. 19-24. ISSN 1655-4418

Abul Hossain, Khandoker and Mohd Jaafar, Mohammad Nazri and Mustafa, Azeman and Appalanidu, Kiran Babu and Ani, Farid Nasir (2004) Application of selective non-catalytic reduction of NOx in small-scale combustion systems. Atmospheric Environment, 38 (39). pp. 6823-6828. ISSN 1352-2310

Abul Hossain, Khandoker (2004) Study of urea based selective non-catalytic reduction of NOx in small scale combustion applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Affandi, Marwan (2004) Energy saving in an air-conditioning system using an inverter and a temperature-speed controller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Norhayati and Hussin, Munirah (2004) Kesan bahan mangkin ke atas proses pengawetan resin isopoliester dalam penghasilan komposit matrik polimer. Jurnal Mekanikal (17). 15 -35. ISSN 0127-3396

Ahmad, Robiah and Jamaluddin , Hishamuddin and Hussain, Mohd. Azlan (2004) Model structure selection for a discrete-time non-linear system using genetic algorithm. Proc. Instn Mech. Engrs, J. Systems and Control Engineering, 218 (12). pp. 85-98.

Ahmad, R. and Jamaluddin, H. and Hussain, M. A. (2004) Model structure selection for a discrete-time non-linear system using a genetic algorithm. Journal of Systems and Control Engineering, 218 (12). pp. 85-98. ISSN 0959-6518

Ahmad, R. and Jamaluddin, H. and Hussain, M. A. (2004) Model structure selection for a discrete-time non-linear system using a genetic algorithm. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 218 . pp. 85-98. ISSN 0959-6518

Ahmad, Robiah (2004) Identification of discrete-time dynamic systems using modified genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Rozie Nani (2004) Development of spreadsheet analysis (SAS) for DFA house methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Sera, Mardani (2004) Development of intake system for improvement of performance of compressed natural gas spark ignition engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ani, Farid Nasir and Tan, Jaan Soon and Mansor, Muhd. Ridzuan and Yusof, Ahmad Anas (2004) Energy conversation in gas separation application using carbon absorption & pressure swing adsorption (PSA) system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Aqida, S. N. and Ghazali, M. I. and Hashim, J. (2004) Effects Of Porosity On Mechanical Properties Of Metal Matrix Composite: An Overview. Jurnal Teknologi A (40A). pp. 17-32. ISSN 0127-9696

Ashrul Ishak, Mohamad Shaiful and Mohd. Jaafar, Mohammad Nazri (2004) The effect of swirl number on discharge coefficient for various orifice sizes in a burner system. Jurnal Mekanikal (17). pp. 99-108. ISSN 0127-3396

Awang, Dzulkifli (2004) Rekabentuk Industri Dalam Kejuruteraan Mekanikal. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Beh, Keh Shin (2004) Substrate Warpage analysis During Solger Reflow Process. Masters thesis, UTM Skudai, Mekanikal.

Beh , Keh Shin (2004) Substrate warpage analysis during solder reflow process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cheng , Chin Fook (2004) Numerical study of acoustic waves in a rectangular chamber with binary gas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

How , Wei Ming (2004) Manufacturing strategy and its implementation for press brake machine manufacturer in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, Mohd. Nasir (2004) Rekabentuk Industri Dalam Menjana Kretiviti Jurutera. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Ismail, Yob Saed and Abu Hassan, Shukur and Abd. Kader, Abd. Saman and Chong, Chin Lee (2004) The mode II interlaminar fracture testing of glass fibre reinforces thermoset composites. Jurnal Mekanikal (17). pp. 87-98. ISSN 0127-3396

Ismail, Napsiah and Abu Bakar, Nooh and Juri, Abdul Hakim (2004) Recognition of cylindrical-based features using edge boundary technique for integrated manufacturing. Robotics and Computer-Integrated Manufacturing, 20 (5). pp. 417-422. ISSN 07365845

J. R., Ayu Bidiawati and Mohd. Yusof, Sha'ri and Nabi Baksh, Mohamed Shariff (2004) Penjadualan preemption menggunakan aturan pelepasan berprioriti dalam sistem bergangguan. Jurnal Mekanikal (17). pp. 48-55. ISSN 0127-3396

Jamaludin, Khairur Rijal (2004) Reka bentuk sistem: kuasa bendalir. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0337–2

Joesni Ralin, Ayu Bidiawati (2004) Penjadualan pengeluaran menggunakan aturan pelepasan berprioriti dalam sistem bergangguan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kang, H. S. and Jalil, M. K. A. and Musa, M. (2004) A PC-based driving simulator using virtual reality technology. In: Proceedings VRCAI 2004 - ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Applications in Industry, 16-18 June 2004, Singapore.

Kang, Hooi Siang and Abdul Jalil, Mohamad Kasim and Mailah, Musa (2004) A PC-based driving simulator using virtual reality technology. In: Proceedings VRCAI 2004 - ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Applications in Industry. ACM, New York, pp. 273-277. ISBN 1-58113-884-9

Khandoker, Abul Hossain (2004) Study of Urea Based Selective Non-Catalytic Reduction of NOx in Small Scale Comburtion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koh, Yee Kan (2004) A unified constitutive model for solder materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kong, Kim Fong (2004) Pengurusan sistem sungai bagi tujuan pengangkutan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kumar Mandal, Nirmala and Abd. Rahman, Roslan and Leong, Mohd Salman (2004) Experimental study on loss factor for corrugated plates by bandwidth method. Ocean Engineering, 31 (10). pp. 1313-1323. ISSN 0029-8018

Kwek, L. C. and Loo, Chu Kiong and Wong, E. K. and Rao, M. V. C. and Mailah, Musa (2004) Active Force Control of a 5-link biped robot. In: Proceedings VRCAI 2004-ACM SIGGRAPH International Conference on Virtual Reality Continuum and its Application in Industry, 28-31 Oct. 2002.

Loh, Sheau Ping (2004) Hydrodynamic coefficients of manoeuvring for small vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malik, Mukhtar (2004) Turning modified titanium with AL2O3 coated cemented carbide (WIDIA DCMT 11304). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masood, Ibrahim (2004) SPC charting procedure for monitoring of small and large shifts in process mean. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Darus, Intan Zaurah and Tokhi, Mohammad Osman (2004) Parametric modeling of a flexible 2D structure. Journal of Low Frequency Noise Vibration and Active Control , 23 (2). pp. 115-131. ISSN 1461-3484

Mat Darus, Intan Zaurah and Tokhi, Mohd. 0sman and Mohd. Hashim, Siti Zaiton (2004) Modelling and control of a flexible structure using adaptive neuro-fuzzy inference system algorithm. In: Icm '04: Proceedings Of The Ieee International Conference On Mechatronics 2004. Institute of Electrical and Electronics Engineers, New York, pp. 159-164. ISBN 0780385993

Mat Lazim, Tholudin and Mat, Shabudin and Huong , Yu Saint (2004) Computational Fluid Dynamic Simulation (CFD) and Experimental Study on Wing-external Store Aerodynamic Interference of subsonic Fighter Aircraf. Journal of Advanced Engineering, 44 (2). pp. 9-14. ISSN 1210-2709

Mat Rejab, Mohd. Ruzaimi (2004) Polymeric foam as core of side-door impact beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Deros, Baba (2004) Development of a benchmarking implementation framework for small and medium sized enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Naiem, Mohd. Azzeri (2004) Viability study on the application of advance blasting method in Malaysian shipbuilding industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Md. Sam, Yahaya (2004) Modeling and control of active suspension system using proportional integral sliding mode control. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, Mohd. Zarhamdy and Tokhi, M. O. and Mailah, Musa and Mohamed, Zaharuddin (2004) Improving perfomance in single-link flexible manipulator using hybrid learning control. Jurnal Mekanikal (18). pp. 13-28. ISSN 0127-3396

Mohamad, Maziah (2004) Vibration control of mechanical suspension system using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, N. (2004) Thermoacoustic Heat Engine. Jurnal Teknologi A (40A). pp. 67-78. ISSN 0127-9696

Mohd. Hashim, Siti Zaiton and Mat Darus, Intan Zaurah and Tokhi, Mohd. 0sman (2004) Nonlinear dynamic modelling of flexible beam structures using neural networks. In: ICM '04: Proceedings of the IEEE International Conference On Mechatronics 2004. IEEE, USA, pp. 171-175. ISBN 0780385993

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam (2004) Development of solid rocket propulsion system at UTM. Jurnal Mekanikal, 18 . pp. 111-121. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mamat, Rizalman (2004) Development of solid rocket propulsion system at UTM. Jurnal Mekanikal (18). pp. 111-121. ISSN 0127-3396

Mohd. Yusof, Noordin (2004) Performance evaluation of coated carbide and coated cermet tools when turning hardened tool steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noordin, M. Y. and Venkatesh, V. C. and Sharif, S. and Elting, S. and Abdullah, A. (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1). pp. 46-58. ISSN 09240136

Noordin, Mohd Yusof and Venkatesh, Vasisht C. and Sharif, Safian and Elting, S. and Abdullah, A. (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1). pp. 46-58. ISSN 09240136

Nordin, M. Y. and Venkatesh, V. C. and Sharif, S. and Elting, S. and Abdullah, A. (2004) Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel. Journal of Materials Processing Technology, 145 (1). pp. 46-58. ISSN 09240136

Ong, K. L. and Musa, Md. Nor and Abdul Latif, Ainullotfi (2004) A state approach to the management of concurrent design task design of symmetrical woble plate compressor. In: International Seminar And Workshop on Engineering Design In International product Development, 2004, Zielona Gora, Rydzyna, Poland.

Phuan, Yoong Jiann (2004) Fe evaluation of thermal property of mould wall material for investment casting and the effect of layers on the hardness of the casting product. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Purnomo, Didik Setyo (2004) Active force control of an nonholonomic wheeled mobile robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramdan, Raden Dadan (2004) Development of cubic boron nitride coating on cutting tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sa'ude, Nasuha (2004) Development of computer aided reprocessability index (CARPI) system for rotational parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saad, Idris (2004) Experimental investigation on the performance of nonaxisymmetric car radiator fan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salehun, Md Amirul Khair (2004) Comparison of Five Alternative Manufacturing Strategies For increasing Job Shop Capacity and Their Impact on Manufacturing Performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sia, Chee Kiong (2004) Non-CFC refrigerants ; first and second law efficiencies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sudin, I. (2004) Investigation into Some Aspects of Partial Ductile Mode in Wet and Dry Grinding of optical Glass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sudin, I. (2004) Investigation into some aspects of partial ductile mode in wet andd dry grinding of optical glass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Susanti, Oknovia (2004) Microstructure and mechanical properties of as-cast and heat treated Ti-48A1 intermettallic alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Soon Tan and Ani, Farid Nasir (2004) Carbon molecular sieves produced from oil palm shell for air separation. Separation and Purification Technology, 35 (1). pp. 47-54. ISSN 1383-5866

Tang, Howe Hing (2004) Implementation of motion planning and active force control to a virtual wheeled mobile robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tang , Howe Hing (2004) Implementation of motion planning and active force control to a virtual wheeled mobile robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tay , Kho Jim (2004) A knowledge based system for preliminary ship design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Venkatesh, Vasisht C. and Sudin, Izman and Mahadevan, S. C. (2004) Electro-chemical mechanical polishing of copper and chemical mechanical polishing of glass. Journal of Materials Processing Technology, 149 (1-3). pp. 493-498. ISSN 09240136

Yaakob, Mohd. Shafiek (2004) Identification of non-linear dynamic systems using fuzzy system with constrained membership functions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yaakob, Omar and Shamsuddin, Suhaili and Koh, Kho King (2004) Stern Flap for resistance reduction of planing hull craft: a case study with a fast crew boat model. Jurnal Teknologi A (41A). pp. 43-52. ISSN 0127-9696

Yusof, Ahmad Anas (2004) The development of microwave absorber from oil palm shell carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, Ahmad Anas (2004) The Develpment of Microwave Absorber From Oil Palm Shell Carbon. Masters thesis, UTM Skudai, Mekanikal.

Yusof, Mustafa and Abdul Rahman, Roslan (2004) Development of an automotive seat for ride comfort. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yusoff, Lukeman (2004) The effect of pressurized induced flow on downdraft gasifire performance with low emission burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zain, M Z M and Tokhi, M O and Mohamed, Z (2004) Hybrid learning control with input shaping for input tracking and vibration suppression of a flexible manipulator. 7th Biennial ASME Conference Engineering Systems Design and Analysis .

Zain, M Z M and Tokhi, M O and Mohamed, Z and Mailah, M (2004) Hybrid iterative learning control of a flexible manipulator. Proceedings of the 23rd IASTED International Conference Modelling, Identification and Control . pp. 313-318.

Zubaidi, Fikri (2004) Prestasi kincir air jenis sentuhan bawah dengan bilah lurus dan bilah lengkung. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

This list was generated on Thu Mar 28 21:52:22 2024 +08.