Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 76.

Article

Abdul Raman, Norazmein and Jamaludin, Khairur Rijal Implementing Toyota Production System (TPS) concept in a small automotive parts manufacturer. ICME 2008 . (Unpublished)

Pesetskaya, Ekaterina and Öchsner, Andreas and Rogosin, Sergei The effective conductivity of 2D porous materials with temperature dependent material properties. Materials Science Forum, 553 . pp. 112-117.

Pesetskaya, Ekaterina and Öchsner, Andreas and Rogosin, Sergei The effective conductivity of 2D porous materials with temperature dependent material properties. Materials Science Forum, 553 (1). pp. 112-117.

Book Section

Abdul Kadir, Mohammed Rafiq and N. , Kamsah and M. , Salim Effect of metal back geometry on the stability of cementless acetabular cup. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 410-413. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Aziz, Z. Eccentric loading on the tibial plate after knee replacement. In: IFMBE Proceedings. Springer Berlin Heidelberg, Germany, pp. 403-406. ISBN 1680-0737

Kazi, S. and As'arry, A. and Md Zain, M. Z. and Mailah, M. and Hussein, M. and Mat Darus, I. Z. Biodynamic response of the human hand-arm models under vibration. In: ACMOS '08: Proceedings Of The 10Th Wseas International Conference On Automatic Control, Modelling And Simulation. Electrical And Computer Engineering . World Scientific And Engineering Acad And Soc, Athens, Grece, pp. 237-242. ISBN 978-960-6766-63-3

Shamsul, Sarip Model pepejal 3D. In: Lukisan Kejuruteraan dan Berbantu Konputer. Pearson, pp. 1-52.

Monograph

Md. Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Md. Tap, Masine Application of design for assembly (DFA) in small and medium industries (SMI). Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Syahrom, Ardiyansyah Design And Development Of Multistage Symmetrical Wobble Compressor. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Conference or Workshop Item

Abd Rahman, Roslan Artificial neural network model for prediction of dynamical behavior in spray boom. In: International Conference on Man Machine System (ICoMMS 2012).

Abd Rahman, Roslan Bus seat suspension modification for pregnant women. In: 2012 International Conference on Biomedical Engineering (ICoBE 2012).

Abdul Aziz, Azhar Controlled Auto-Ignition (CAI) combustion in a two-stroke cycle engine using hot burned gases. In: UNSPECIFIED.

Abdul Hamid, Mohd. Foad Application of probability and statistics in constructing likelihood of failure bands for RBI approach in structural integrity management. In: UNSPECIFIED.

Abdul Latiff, Zulkarnain Design a four-stroke Homogeneous Charge Compression Ignition (HCCI) engine. In: UNSPECIFIED.

Abdul Latiff, Zulkarnain The effect of fuel additives on gasoline heating value and spark ignition engine performance: case study. In: The 5th IMAT International on Advances in Thermo-fluids.

Abdul Malik, Adi Maimun The effects of bank and shallow water on the flow pattern around hull of LNG carrier using CFD. In: 14th Marine Industries Conference (MIC2012).

Abdul Rahman, Roslan Active force control applied to spray boom structure. In: ICAMME 2012 : International Conference on Applied Mechanics and Mechanical Engineering.

Abdul Rahman, Roslan Bus seat suspension modification for pregnant women. In: UNSPECIFIED.

Abdul Rahman, Roslan Off-road seat suspension optimization by particles swarm algorithm. In: ICAMME 2012 : International Conference on Applied Mechanics and Mechanical Engineering.

Abu Bakar, Tuty Asma The effects of quenching media on the microstructures and properties of Cu-Al-Ni shape memory alloys. In: 21st Scientific Conference Of The Microscopy Society Malaysia.

Adnan, Faizul Amri and Hironori, Yasukawa Experimental investigation of wave-induced motions of an obliquely moving ship. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ahmad, Mohd Zamani and Yaakob, Omar and Abd. Kader, Ab. Saman and Sinha, R.P. and Olanrewaju, Oladokun Sulaiman An analysis of technological development in propulsion and transportation. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ahmad, Arshad Analysis of the fuel properties of palm oil waste for gasification. In: UNSPECIFIED.

Ahmad, Arshad Analysis of the pyrolytic fuel properties of empty fruit bunch briquettes. In: UNSPECIFIED.

Ahmad, Arshad A semicontinuous approach for azeotropic distillation. In: UNSPECIFIED.

Ahmad, Mohd. Zamani The concept of hybrid ballast free system. In: The 6th Asia-Pacific Workshop on Marine Hydrodymics-APHydro2012.

Ahmad, Mohd. Zamani Draft, trim and heel control for LNG ship with hybrid ballast free system. In: UNSPECIFIED.

Ahmad, Norhayati The effect of laser cutting parameters on the aerospace structure panel of CFRP composite material. In: AEROTECH IV-2012 conference .

Ammoo, Mohd. Shariff and Mohd Nayan, Mohd Idham and Hussain, Mohd Nasir Conceptual design of UTM 4-seater helicopter. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ani, Farid Nasir Bio-char and pyroligneous liquid from oil palm leaf stem. In: UNSPECIFIED.

Ani, Farid Nasir Characteristic of bio-oils from oil palm biomass using different pyrolysis processing techniques. In: UNSPECIFIED.

Awang, I M and C , Y Leong and Abu Bakar, Abd Rahim and Abdul Ghani, Badri and Abd. Rahman, Roslan and Md. Zain, Mohd. Zarhamdy Modeling and simulation of automotive wiper noise and vibration using finite element method. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Che Sidik, Nor Azwadi Numerical prediction of heat transfer from heated thin plate in a square cavity by using LBM. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012).

Daud, Mohd. Fadzil Conceptual knowledge in three dimensional computer aided design (3D CAD) modeling: A literature review and conceptual framework. In: UNSPECIFIED.

Hamzah, Esah Analysis of Nucleation and bond morphology of nanocrystalline diamonds deposited on tungsten carbide using HFCVD. In: UNSPECIFIED.

Idris, Mohd. Hasbullah Effect of flux on in-situ melting shell investment casting of AZ91D magnesium alloy. In: International Conference on Thermal, Material and Mechanical Engineering (ICTMME'2012).

Ishak, Iskandar Shah and Mansor, Shuhaimi and Mat Lazim, Tholudin Experimental research on helicopter tail shake phenomenon. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ishak, Iskandar Shah and Mat Lazim, Tholudin and Mansor, Shuhaimi Wind tunnel tests on a generic eurocopter 350Z helicopter. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ismail, Nasrudin Development of ICT-based training module to enhance the awareness of Malaysian fishermen on engineering, science, technology, quality, and safety. In: UNSPECIFIED.

K, Li Wei and Mat Saman, Muhamad Zameri and L, Meng Chiao Development of green design framework for Malaysian automotive industries. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Krishnan, S and Lee, Choong-Won Development of a 100-n hydrogen peroxide rocket engine. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kurdi, Ojo and Abd. Rahman, Roslan and Tamin, Mohd. Nasir Stress analysis of heavy duty truck chassis using finite element method. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kurniawan, Denni Effect of process parameters on qualityof cold spinned tube head. In: 3rd International Conference on Mechanical & Manufacturing Engineering (ICME2012).

Mailah, Musa Robust active heave compensated winch-driven overhead crane system for load transfer in marine operation. In: 4th International Conference on Intelligent and Advanced Systems (ICIAS2012).

Mailah, Musa Winch driven active heave compensation for load transfer in overhead crane system. In: International Conference on Intelligent and Advanced Systems (ICIAS2012).

Maimun, Adi Assesment of bank effect in restricted water using computational fluid dynamics. In: UNSPECIFIED.

Mat Darus, Intan Zaurah Active vibration control using pole placement method of a flexible plate structure optimized by genetic algorithm. In: 2012 IEEE Conference on Control, System & Industrial Informatics (ICCSII2012).

Mat Darus, Intan Zaurah Application of multiplayer perceptron and radial basis funtion neural network IN steady state modeling of automotive air conditioning system. In: 2012 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2012).

Mat Darus, Intan Zaurah Effect of front double wishbone strut position on vehicle steering and suspension performance. In: 2012 IEEE Conference on Control, System & Industrial Informatics (ICCSII2012).

Mat Darus, Intan Zaurah Fuzzy PID controller simulation for a quarter-car semi active suspension system uisng magnetorheological damper. In: 2012 IEEE Conference on Control, System & Industrial Informatics (ICCSII2012).

Mat Saman, Muhamad Zameri Life cycle assessment of membrane system for wastewater treatment : a review and further research. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012).

Mat Yajid, Muhamad Azizi Effects of annealing on structural, chemical and electrical properties of Al-Cu bilayer thin film deposited on silicon substrates by Rf magnetron sputtering. In: 21st Scientific Conference of the Microscopy Society Malaysia (MSM).

Mohamed, Yasser Aerodynamic characteristics of a wig craft by numerical simulation. In: UNSPECIFIED.

Mohamed, Yasser Assessment of ship-bank interactions On LNG tanker in shallow water. In: UNSPECIFIED.

Mohamed Kamar, Haslinda The use of mechanical ventilation system in an electric car of a double-storey residential house in Malaysia. In: Imat 2012, The 5th International Meeting Of Advances In Thermo-Fluids, Bintan Island, Indonesia..

Mohamed Shaharom, Awaluddin A proposed maintenance performance measures for manufacturing companies. In: UNSPECIFIED.

Mohd. Rohani, Jafri Development of a holistic backpack-back pain model for school children. In: UNSPECIFIED.

Mohd. Rohani, Jafri The reaction of Nigerian schoolchildren to back pain due to backpack usage. In: Scientific Conference on Occupational Safety and Health (SCI-COSH).

Mohd. Yusof, Sha'ri Drivers and barriers to sustainable manufacturing initiatives in Malaysian automotive companies. In: UNSPECIFIED.

Musa, Md. Nor Design and development of vertical axis wind turbine. In: UNSPECIFIED.

Mustaffar , Mushairry Automated prediction of noise from construction sites. In: UNSPECIFIED.

Mustaffar , Mushairry A sustainable tourism area – in a way to preserve the environment: an overview. In: UNSPECIFIED.

Nasution, Henry Determination of motive nozzle and constant-area diameters: numerical study of ejector as an expansion device in split-type air conditioner. In: UNSPECIFIED.

Ourdjini, Ali Thermal analysis and microscopic characterisation of the Al-20%Mg2Si in-situ composite. In: 21st Scientific Conference of the Microscopy Society Malaysia (MSM).

Ourdjini, Ali Thermal analysis and microscopic characterization of the AL-20%Mg2Si IN-SITU composite. In: The 21 Scientific Conference of The Microscopy Society of Malaysia.

Priyandoko, Gigih and Musa, Mailah and Jamaluddin, Hishamuddin Practical implementation of skyhook and adaptive active force control to an automotive suspension system. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Priyanto, Agoes and Erwandi, Erwandi and Samudro, Samudro Surge forces of a FPSO at Lee side of submerged plate in regular waves. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Priyanto, Agoes Simulation on LNG tanker track-keeping autopilot in canal water. In: 2012 International Conference on System Engineering and Technology.

Rahmat, Mohd Zaki Yamani and Mohd. Jaafar, Mohammad Nazri and Abdul-Latif, Ainullotfi and Wan Ali, Wan Khairuddin and Mat Yajid, Zuriana Mariati and Kimsin, Intan Noryanah Propellant development for small rockets. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Saat , Aminuddin Characterisation of aerosol combustible mixtures generated using condensation process. In: UNSPECIFIED.

Supriyo, Bambang Development of electro-mechanical actuation system for continuously variable transmissions in automotive applications. In: UNSPECIFIED.

Syahrom, Ardiyansyah and Wan Mat, Wan Ali and Abdul-Latif, Ainullotfi and Musa, Md Nor Optimized design of home refueling appliance (HRA) with novel multi-stage symmetrical wobble-plate compressor. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Syahrom, Ardiyansyah Coefficient of restitution in badminton racket. In: UNSPECIFIED.

Syahrom, Ardiyansyah Comparison fatigue life time prediction of femoral ball and condyle bovine trabecular bone. In: UNSPECIFIED.

Tamin, Mohd Nasir and Hamzah, Esah and Ong, Wei Rex Effects of chromium content on fatigue crack growth behavior of Ti-48Al-xCR alloys. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Wan Ali, Wan Khairuddin Application of X-rays in non-destructive evaluation of solid propellant in aerospace industry. In: UNSPECIFIED.

This list was generated on Sun Nov 23 04:29:11 2014 MYT.