Items where Division is "Mechanical Engineering" and Year is 2017

Khalajabadi, S. Z. and Ahmad, N. and Izman, S. and Haji Abu, A. B. and Haider, W. and Abdul Kadir, M. R. (2017) In�vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2nanocomposite for biomedical applications. Journal of Alloys and Compounds, 696 . pp. 768-781. ISSN 0925-8388

Md. Saad, Amir Putra (2017) Dynamic degradation of porous magnesium under simulated environment of human cancellous bone. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behrouzi, Fatemeh (2017) Vertical axis current turbine using arm and self-adjusting blade angle for low speed current. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Lazim, Ahmad Razimi (2017) Squealing occurrence of worn brake pads to foreign particles embedment into the friction layers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Yasir Hassan (2017) Prediction, classification and diagnosis of spur gear conditions using artificial neural network and acoustic emission. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhammad, Fahmi F. and Yahya, Mohd. Yazid and Sulaiman, Khaulah (2017) Improving the performance of solution-processed organic solar cells by incorporating small molecule acceptors into a ternary bulk heterojunction based on DH6T:Mq3:PCBM (M = Ga, Al). Materials Chemistry and Physics, 88 . pp. 86-94. (Unpublished)

Nasef, M. M. and Fujigaya, T. and Lotf, E. A. and Nakashima, N. (2017) Electrospinning of poly(vinylpyrrodine) template for formation of ZrO2 nanoclusters for enhancing properties of composite proton conducting membranes. International Journal of Polymeric Materials and Polymeric Biomaterials, 66 (6). pp. 289-298. ISSN 0091-4037

Khoo, S. J. and Johar, M. and Low, K. O. and Wong, K. J. (2017) Interfacial shear strength characterisation of alkali treated bamboo bundle–polyester composites using an improved technique. Plastics, Rubber and Composites, 46 (10). pp. 450-457. ISSN 1465-8011

Negmeldin, Amr (2017) Modelling and control of two-link flexible manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chen, King Sing (2017) Prediction of meso-scale combustion using different turbulence model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malik, Fawad Rahim (2017) System design of a hydrogen-powered fuel cell for all terrain-vehicles (ATVs). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Go, Yen Ny (2017) The evaluation of lift and drag force for solid body with micro dimple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamat Yain, Nursahliza (2017) Marine riser vortex induced vibration (VIV) suppression device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Johar, M. and Israr, H. A. and Low, K. O. and Wong, K. J. (2017) Numerical simulation methodology for mode II delamination of quasi-isotropic quasi-homogeneous composite laminates. Journal of Composite Materials, 51 (28). pp. 3955-3968. ISSN 0021-9983

Farahany, Saeed and Low, Hai Tat and Hamzah, Esah and Hamid, Reza Bakhsheshi-Rad and Cho, M. H. (2017) Microstructure development, phase reaction characteristics and properties of quaternary Zn-0.5Al-0.5Mg-xBi hot dipped coating alloy under slow and fast cooling rates. Surface and Coatings Technology, 315 . pp. 112-122. ISSN 0257-8972

Arifin, N. and Yusoff, H. and Izman, S. and Khadir, A. Z. A. and Ali, R. and Yacob, S. (2017) Polyoxymethylene (POM) integrity resulting from its dependencies on material geometries and processing methodology. International Journal of Advanced and Applied Sciences, 4 (3). pp. 41-44. ISSN 2313-626X

Shirdar, M. R. and Izman, S. and Kheimehsari, H. M. and Ahmad, N. and Ma’aram, A. (2017) Evaluation of mechanical and electrochemical properties of FHA-coated Co–Cr implant. Surface Innovations, 5 (2). pp. 90-96. ISSN 2050-6252

Wan Mahari, W. A. and Zainuddin, N. F. and Chong, C. T. and Lee, C. L. and Lam, W. H. and Poh, S. C. (2017) Conversion of waste shipping oil into diesel-like oil via microwave-assisted pyrolysis. Journal of Environmental Chemical Engineering, 5 (6). pp. 5836-5842. ISSN 2213-3437

Ab. Talib, M. H. and Mat Darus, I. Z. (2017) Intelligent fuzzy logic with firefly algorithm and particle swarm optimization for semi-active suspension system using magneto-rheological damper. JVC/Journal of Vibration and Control, 23 (3). pp. 501-514. ISSN 1077-5463

Ab. Talib, Mat Hussin (2017) Intelligent controllers for vechicle suspension system using magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Abas, Muhamad Ariff (2017) Fractal theory of a propagating crack in austenitic stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Jalil, Nurhanafifi (2017) Active vibration control of flexible beam incorporating recursive least square and neural network algorithms. PhD thesis, Universiti Teknologi Malaysia.

Abd. Kader, Ab. Saman and Md. Zin, Nor Azlina and Jalal, M.Rajali (2017) Improvement of shipberth capacity for a container port. Journal of Transport System Engineering, 4 (2). pp. 1-7. ISSN 2289–9790

Abd. Latiff, Nor Zaihan (2017) Development of a job rotation model for a noise hazard reduction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - Faculty of Engineering - School of Mechanical Engineering.

Abd. Rahman, Nur Ain (2017) Effect of air cushion on the resistance reduction of Multi-purpose Amphibious Vehicle (MAV) in calm and waves water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdollahi, A. and Mohammed, H. A. and Vanaki, S. M. and Osia, A. and Golbahar Haghighi, M. R. (2017) Fluid flow and heat transfer of nanofluids in microchannel heat sink with V-type inlet/outlet arrangement. Alexandria Engineering Journal, 56 (1). pp. 161-170. ISSN 1110-0168

Abdollahi, A. and Mohammed, H. A. and Vanaki, S. M. and Osia, A. and Golbahar Haghighi, M. R. (2017) Fluid flow and heat transfer of nanofluids in microchannel heat sink with V-type inlet/outlet arrangement. Alexandria Engineering Journal, 56 (1). pp. 161-170. ISSN 1110-0168

Abdollahi, A. and Sharma, R. N. and Mohammed, H. A. and Vatani, A. (2017) Heat transfer and flow analysis of Al2O3-Water nanofluids in interrupted microchannel heat sink with ellipse and diamond ribs in the transverse microchambers. Heat Transfer Engineering . pp. 1-9. ISSN 0145-7632 (In Press)

Abdul Awal, Ziad (2017) Unmanned Rotorcraft In Aggressive Environment: Aerodynamic Flow Performance Against Wind Gust. International Journal Of Geomate, 13 (40). pp. 173-182. ISSN 2186-2982

Abdul Aziz, Azhar and Mohebbi, Mostafa and Arman, Hamidi and Alireza, Hajialimohammadi and Vahid, Hosseini (2017) Modeling of pressure line behavior of a common rail diesel engine due to injection and fuel variation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (3). pp. 661-669. ISSN 1678-5878

Abdul Halim, Z. A. and Mat Yajid, M. A. and Idris, M. H. and Hamdan, H. (2017) Dispersion of polymeric-coated–silica aerogel particles in unsaturated polyester composites: effects on thermal-mechanical properties. Journal of Dispersion Science and Technology . pp. 1-9. ISSN 0193-2691 (In Press)

Abdul Halim, Z. A. and Mat Yajid, M. A. and Idris, M. H. and Hamdan, H. (2017) Effects of silica aerogel particle sizes on the thermal–mechanical properties of silica aerogel–unsaturated polyester composites. Plastics, Rubber and Composites, 46 (4). pp. 184-192. ISSN 1465-8011

Abdul Hanan, Umar and Abu Hassan, Shukur and Wahit, Mat Uzir and Yusof, Rohana and Omar, Balqis and Jamal, Siti Khalijah (2017) Mechanical properties of recycled glass fibre reinforced nanoclay/unsaturated polyester composites. International Journal of Advanced And Applied Sciences (IJAAS), 4 (3). pp. 1-6. ISSN 2313-3724

Abdul Majid, M. M. and Abu Bakar, S. A. and Mansor, S. and Abdul Hamid, M. K. and Ismail, N. H. (2017) Modelling and PID value search for antilock braking system (ABS) of a passenger vehicle. Journal of the Society of Automotive Engineers Malaysia (JSAEM), 1 (3). pp. 228-236. ISSN 2600-8092

Abdul Rahim, Erween and Talib, Norfazillah and Abdul Sani, Amiril Sahab and Syahrullail, Samion and Mohid, Zazuli (2017) Tribological evaluation on various formulation of modified RBD palm olein as sustainable metalworking fluids for machining process. In: 7th International Conference on Manufacturing Science and Technology, ICMST 2016, 16 - 18 July 2016, Sarawak, Malaysia.

Abdul Rahim, Norwazan (2017) Performance and emission of swirl burner with different swirl numbers using palm, coconut and jatropha oil biodiesel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Razak, Siti Nur Faezah (2017) Effect of heating temperatures and mould thickness on the geometry shape of in-situ melting magnesium investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Sani, A. S. and Rahim, E. A. and Samion, S. (2017) Tribological performance of modified jatropha oil containing oil-miscible ionic liquid for machining applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1738-494X

Abdul Wahab, Abdul Hadi and Abdul Kadir, Mohammed Rafiq and Harun, Muhamad Noor and Tunku Zainol Abidin, Tunku Kamarul Zaman and Syahrom, Ardiyansyah (2017) Number of pegs influence focal stress distributions and micromotion in glenoid implants: a finite element study. Medical & Biological Engineering & Computing, 55 (3). pp. 439-447. ISSN 0140-0118

Abdul Wahid, Mazlan and Seyed Ehsan, Hosseini and Hussen, Hasanen M. and Hussein, Jassim Akeiber and Saud, Safaa Najah and Mohammad, Abdulrahman Th. (2017) An overview of phase change materials for construction architecture thermal management in hot and dry climate region. Applied Thermal Engineering, 112 . pp. 1240-1259. ISSN 13594311

Abdullah, Hayati (2017) An enhanced temperature control strategy for energy saving in building air-conditioning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, M. A. and Abdul Rahim, E. and Abu Bakar, A. R. and Akop, M. Z. (2017) Analysis of the effectiveness of brake insulator in decreasing the brake squeal noise. Journal of Mechanical Engineering and Technology, 9 (1). pp. 87-102. ISSN 2180-1053

Abdullah, Muhamad Adlan (2017) Optimisation of palm oil biodiesel combustion in common rail for small car engine. PhD thesis, Universiti Teknologi Malaysia.

Abdullah, Muhamad Adlan (2017) Optimisation of palm oil biodiesel combustion in common rail for smalll car engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, N. A. Z. and Sani, M. S. M. and Husain, N. A. and Rahman, M. M. and Zaman, I. (2017) Dynamics properties of a Go-kart chassis structure and its prediction improvement using model updating approach. International Journal of Automotive and Mechanical Engineering, 14 (1). pp. 3887-3897. ISSN 2229-8649

Abdullahi, T. and Harun, Z. and Othman, M. H. D. (2017) A review on sustainable synthesis of zeolite from kaolinite resources via hydrothermal process. Advanced Powder Technology, 28 (8). pp. 1827-1840. ISSN 0921-8831

Abioye, A. M. and Ani, F. N. (2017) Advancement in the production of activated carbon from biomass using microwave heating. Jurnal Teknologi, 79 (3). pp. 79-88. ISSN 0127-9696

Abioye, A. M. and Faraji, S. and Ani, F. N. (2017) Effect of heat treatment on the characteristics of electroless activated carbon-nickel oxide nanocomposites. Jurnal Teknologi, 79 (7-3). pp. 61-67. ISSN 0127-9696

Abioye, A. M. and Noorden, Z. A. and Ani, F. N. (2017) Synthesis and characterizations of electroless oil palm shell based-activated carbon/nickel oxide nanocomposite electrodes for supercapacitor applications. Electrochimica Acta, 225 . pp. 493-502. ISSN 0013-4686

Abioye, Adekunle Moshood (2017) Characterization and supercapacitive performance of nanocomposite electrodes made of nickel oxide and activated carbon frpm oil palm shell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, T. A. and Rosly, M. F. and Mohamad Jafar, N. S. A. (2017) Eggshell coated grey cast iron for corrosion applications. Jurnal Teknologi, 79 (7-4). pp. 1-6. ISSN 0127-9696

Abu Shah, Ismail (2017) Damage mechanics based approach in failure predication of draw forming procecesses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abubakar, M. and Basheer, U. and Ahmad, N. (2017) Mesoporosity, thermochemical and probabilistic failure analysis of fired locally sourced kaolinitic clay. Journal of the Association of Arab Universities for Basic and Applied Sciences, 24 . pp. 81-88. ISSN 1815-3852

Adeyemi, A. J. and Rohani, J. M. and Abdul Rani, M. R. (2017) Backpack-back pain complexity and the need for multifactorial safe weight recommendation. Applied Ergonomics, 58 . pp. 573-582. ISSN 0003-6870

Adnan, M. A. and Mohd. Fuad, M. A. H. and Hasan, M. F. (2017) Oxidative torrefaction for pulverized palm biomass using air. Jurnal Teknologi, 79 (7-4). pp. 7-14. ISSN 0127-9696

Afifah, A. N. and Syahrullail, S. and Amirrul Amin, M. (2017) Mechanical properties of palm kernel oil- copper oxide nanolubricant. Jurnal Teknologi, 79 (7-4). pp. 61-66. ISSN 0127-9696

Afifah, A. N. and Syahrullail, S. and Amirrul Amin, M. and Faizal, H. M. (2017) Mechanical properties of palm kernel oil-copper oxide nanolubricant. Jurnal Teknologi, 79 (7-4). pp. 61-66. ISSN 0127-9696

Ahmad, A. and Yunos, M. Z. and Harun, Z. and Hassan, M. F. and Adzila, S. and Arifin, A. M. T. and Rahman, M. N. A. and Haq, R. H. A. and Baharulrazi, N. (2017) Performance of polysulfone/PANI membrane for humic acid separation. Chemical Engineering Transactions, 56 . pp. 703-708. ISSN 2283-9216

Ahmad, N. and Rasman, M. S. and Wan Hussin, W. N. (2017) Heat resistant and tensile properties of glass fiber reinforced polymer composites. Jurnal Teknologi, 79 (7-4). pp. 29-35. ISSN 0127-9696

Ahmad, N. A. and Md. Tap, M. and Syahrom, A. and Mohd. Rohani, J. (2017) Conclusion. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 39-41. ISBN 978-981103285-1

Ahmad, N. A. and Md. Tap, M. and Syahrom, A. and Mohd. Rohani, J. (2017) Factors leading to slip-and-fall incidents. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 13-19. ISBN 978-981103285-1

Ahmad, N. A. and Md. Tap, M. and Syahrom, A. and Mohd. Rohani, J. (2017) Human perception of slipperiness through measured COF. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 33-37. ISBN 978-981103285-1

Ahmad, N. A. and Md. Tap, M. and Syahrom, A. and Mohd. Rohani, J. (2017) Quantitative and qualitative factors that leads to slip and fall incidents. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, iv-v. ISBN 978-981103285-1

Ahmad, N. A. and Md. Tap, M. and Syahrom, A. and Mohd. Rohani, J. (2017) The relationship between coefficient of friction (COF) with floor slipperiness and roughness. In: SpringerBriefs in Applied Sciences and Technology. Springer Verlag, pp. 21-31. ISBN 978-981103285-1

Ahmad, S. and Wong, K. Y. and Elahi, H. (2017) Sustainability assessment and analysis of Malaysian food manufacturing sector—a move towards sustainable development. Advanced Science Letters, 23 (9). pp. 8942-8946. ISSN 1936-6612

Ahmad Fuad, Ahmad Faizal and Osnin, Noor Apandi and Fadzil, Mohd Naim and Ahmad, Mohd Zamani (2017) Proposed minimum luminous range for existing lighthouses in this age of global navigation satellite systems by using the correlation between light intensity and luminous range. International Journal of e-Navigation and Maritime Economy, 6 . pp. 29-36.

Ahmad Seri, M. A. and Hamzaha, E. and Ahdasha, A. and Mamat, M. F. (2017) Anticorrosion performance of self-healing polymeric coatings on low carbon steel substrates. Jurnal Teknologi, 79 (7-4). pp. 73-81. ISSN 0127-9696

Ahmadipourroudposht, Mohaddeseh (2017) A product design framework for one-of-a-kind production using integrated quality function deployment and operational research techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Ghaleb, Fawaz (2017) Effect of ventilation fan on thermal comfort in a medium size mosque. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aiman, Y. and Syahrullail, S. (2017) Development of palm oil blended with semi synthetic oil as a lubricant using four-ball tribotester. JURNAL TRIBOLOGI, 13 . pp. 1-20.

Aiman, Y. and Syahrullail, S. and Yahya, W. J. (2017) Tribological performance of palm kernel oil with addition of pour point depressants as a lubricant using four-ball tribotester under variable load test. Jurnal Teknologi, 79 (7-3). pp. 43-52. ISSN 0127-9696

Akeiber, H. J. and Hosseini, S. E. and Hussen, H. M. and Wahid, M. A. and Mohammad, A. T. (2017) Thermal performance and economic evaluation of a newly developed phase change material for effective building encapsulation. Energy Conversion and Management, 150 . pp. 48-61. ISSN 0196-8904

Akeiber, Hussein Jassim (2017) Experimental evaluation of paraffin based phase change material on thermal performance in building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Al asadi, M. T. and Mohammed, H. A. and Kherbeet, A. S. and Al aswadi, A. A. (2017) Numerical study of assisting and opposing mixed convective nanofluid flows in an inclined circular pipe. International Communications in Heat and Mass Transfer, 85 . pp. 81-91. ISSN 0735-1933

Ali, Arifah (2017) Effects of fin stabilizer configurations on semi swath resistance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, H. F. M. and Fath El-Bab, A. M. R. and Zyada, Z. and Megahed, S. M. (2017) Estimation of landmine characteristics in sandy desert using neural networks. Neural Computing and Applications, 28 (7). pp. 1801-1815. ISSN 0941-0643

Ali, Mohammed A. H. and W. Yusoff, Wan Azhar and Hamedon, Zamzuri and M. Yussof, Zulkifli and Mailah, Musa (2017) Mechatronic design and development of an autonomous mobile robotics system for road marks painting. In: 2016 IEEE Industrial Electronics and Applications Conference, IEACon 2016, 20 - 22 November 2016, Kota Kinabalu, Sabah.

Alimin, A. J. and Kuang, He Y. and Sapit, A. and Selamat, H. (2017) A study on a swirl type multi-hole fuel injector for a PFI system to improve air-fuel mixture formation. In: 2nd International Conference on Computational Fluid Dynamics in Research and Industry, CFDRI 2017, 3 - 4 August 2017, Songkhla, Thailand.

Alipour, Roozbeh (2017) Impulsive sheet metal forming based on standoff charge for conical geometry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aliyu, A. A. A. and Rohani, J. M. and Rani, A. M. A. and Musa, H. (2017) Optimization of electrical discharge machining parameters of SiSiC through response surface methodology. Jurnal Teknologi, 79 (1). pp. 119-129. ISSN 0127-9696

Aliyu, Abubakar Sadiq (2017) Bio-butanol production from permentation of oil palm frond liquid extract as potential fuel for spark ignition engines. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amin, N. L. M. and Yusof, S. Z. and Kahar, M. N. A. and Bakar, T. A. A. and Fadil, N. A. (2017) Tin whiskers formation and growth on immersion sn surface finish under external stresses by bending. In: Joining and Welding Symposium 2017, 11 July 2017, Pahang, Malaysia.

Amir Paisal, Muhammad Sufyan and Wahab, Muhamad Azmi and Taib, Ishkrizat and Mat Isa, Norasikin and Ramli, Yahaya and Md. Seri, Suzairin and Darlis, Nofrizalidris and Osman, Kahar and Md. Khudzari, Ahmad Zahran and Nordin, Normayati (2017) Flow behaviour in normal and Meniere's disease of endolymphatic fluid inside the inner ear. In: 2nd International Conference on Computational Fluid Dynamics in Research and Industry, CFDRI 2017, 3 - 4 August 2017, Songkhla, Thailand.

Amiril, S. A. S. and Rahim, E. A. and Syahrullail, S. (2017) A review on ionic liquids as sustainable lubricants in manufacturing and engineering: Recent research, performance, and applications. Journal of Cleaner Production, 168 . pp. 1571-1589. ISSN 0959-6526

Andwari, A. M. and Aziz, A. A. and Said, M. F. M. and Esfahanian, V. and Latiff, Z. A. and Said, S. N. M. (2017) Effect of internal and external EGR on cyclic variability and emissions of a spark ignition two-stroke cycle gasoline engine. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3004-3014. ISSN 2289-4659

Ang, Kiang Long (2017) Ballistic properties of a polybutadiene propellant for rocket application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anjomshoae, Ali and Hassan, Adnan and Kuan, Yew Wong and Samuel, Cherian (2017) Effect of information sharing and capacity adjustment on the healthcare supply chain: a case of flood disaster. Journal of Applied Environmental and Biological Sciences, 7 (3S). pp. 57-64. ISSN 2090-4274

Anshar, M. and Ani, F. N. and Kader, A. S. (2017) Co-pyrolysis of rice straw with high density polyethylene bag. Chiang Mai Journal of Science, 44 (3). pp. 977-987. ISSN 0125-2526

Anshar, M. and Ani, F. N. and Kader, A. S. and Makhrani, Makhrani (2017) Electrical energy potential of corn cob as alternative energy source for power plant in Indonesia. Advanced Science Letters, 23 (5). pp. 4184-4187. ISSN 1936-6612

Anshar, M. and Ani, F. N. and Kader, S. (2017) Co-combustion modeling of rice husk and plastic bag as energy source in Indonesia. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3105-3111. ISSN 1819-6608

Arezoudar, Ehsan Fallahi (2017) Nanofiber based scaffold fabrication, characterization and optimization for tissue engineering aortic heart valve. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arriaza, Oscar Velasquez and Kim, Dong-Won and Dong, Yoon Lee and Suhaimi, Mohd. Azlan (2017) Trade-off analysis between machining time and energy consumption in impeller NC machining. Robotics and Computer-Integrated Manufacturing, 43 . pp. 164-170. ISSN 0736-5845

Arvin Rao, S. and Jusoh, M. A. and Abu Bakar, A. R. and Abdul Hamid, M. K. and Zakaria, K. (2017) Reduction of disc brake squeal noise using constrained layer dampers. Jurnal Teknologi, 79 (7-4). pp. 83-87. ISSN 0127-9696

As'arry, A. and Rezali, K. A. M. and Jalil, N. A. A. and Samin, R. and Zulkefli, Z. A. and Zain, M. Z. M. (2017) Tremor suppression for 4-DOFs biodynamic hand model using genetic algorithm. International Journal of Advanced Mechatronic Systems, 7 (3). pp. 151-157. ISSN 1756-8412

As'Arry, Azizan and Naseer, Fahad Mohammad and Rahman, Tuan A. Z. and Md. Rezali, Khairil Anas and Md. Zain, Mohd. Zarhamdy (2017) Semi-active suspension control for formula SAE car using magneto-rheological fluid. In: 2017 IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2017, 24 - 25 April 2017, Langkawi Island, Kedah.

Asmawi, A. M. and Allauldin, S. and Yaacob, N. and Saat, A. and Radzi, A. A. and Ahmad, M. Z. and Fuad, A. F. A. (2017) The effect of N550 carbon black in polyester resin for fire-retardant application in marine composite. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 1304-1308. ISSN 1819-6608

Assalah, Muhamad Aminuddin (2017) Business performance evaluation through integration of business model canvas (BMC) with analytic hierarchy process (AHP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Atiqah Zolpakar, N. and Mohd. Ghazali, N. and Ahmad, R. (2017) Optimization of the stack unit in a thermoacoustic refrigerator. Heat Transfer Engineering, 38 (4). pp. 431-437. ISSN 0145-7632

Awang, N. A. and Kamar, H. M. and Kamsah, N. (2017) Energy saving potential of an air-conditioner - ice thermal storage (AC-ITS) system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 31 (1). pp. 1-10. ISSN 2289-7879

Ayo, S. A. and Mohd. Ghazali, N. and Mansor, S. (2017) Response to the comments on the paper “Outdoor ventilation performance of various configurations of a layout of two adjacent buildings under isothermal conditions". Building Simulation, 10 (2). pp. 279-281. ISSN 1996-3599

Ayo, S. A. and Mohd. Ghazali, N. and Mansor, S. (2017) Response to the comments on the paper “Outdoor ventilation performance of various configurations of a layout of two adjacent buildings under isothermal conditions”. Building Simulation, 10 (2). pp. 279-281. ISSN 1996-3599

Ayu, H. Mas and Daud, R. and Shah, A. and Faiz, M. Y. Mohd and Hazwan, H. M. and Salwani, M. S. and Tomadi, S. H. and Reza, M. S. (2017) Thermal oxidation process improved corrosion in cobalt chromium molybdenum alloys. INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES, 4 (9). pp. 144-149.

Azaman, A. and Isa, N. A. M. and Dzahir, M. A. M. and Xiang, K. K. (2017) Effects of baby carrier on wearer's posture stability. Journal of Mechanical Engineering, SI 4 (1). pp. 107-118. ISSN 1823-5514

Azman, N. F. and Samion, S. and Rahim, E. A. and Shunpei, K. (2017) The influence of zinc-dialkyl-dithiophosphate (ZDDP) additives on the tribological performance of RBD palm kernel. Journal of Mechanical Engineering (Specia). pp. 65-77. ISSN 1823-5514

Azman, Nurul Farhanah and Samion, Syahrullail (2017) Improvement of the lubrication performance of RBD palm stearin as an alternative lubricant under different sliding speeds. Strojniski Vestnik/Journal of Mechanical Engineering, 63 (1). pp. 15-24. ISSN 0039-2480

Baba, Aliyu Adamu (2017) Rural electrification through renewable resources in a rural/remote area in Nigeria: design, optimization and techno-economic evaluation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Badar Sharif, Siti Khadijah (2017) Real time implementation of PID and active force control for feedrate control of a syringe fluid dispenser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagaber, S. A. and Abdullahi, T. and Harun, Z. and Daib, N. and Othman, M. H. D. (2017) The Effect of Lanthanum Addition on the Microstructure and Mechanical Properties of A390 Aluminium Alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4559-4564. ISSN 1319-8025

Bagheri, Mohammad Reza and Seif, Mohammad Saeed and Mehdigholi, Hamid and Yaakob, Omar (2017) Analysis of noise behaviour for marine propellers under cavitating and non-cavitating conditions. Ships and Offshore Structures, 12 (1). pp. 1-8. ISSN 1744-5302

Bahador, A. and Hamzah, E. and Kondoh, K. and Abu Bakar, T. A. and Yusof, F. and Imai, H. and Saud, S. N. and Ibrahim, M. K. (2017) Effect of deformation on the microstructure, transformation temperature and superelasticity of Ti–23 at% Nb shape-memory alloys. Materials and Design, 118 . pp. 152-162. ISSN 0264-1275

Bahador, A. and Hamzah, E. and Kondoh, K. and Kawahito, Y. and Junko, U. and Bakar, T. A. A. (2017) Mechanical and superelastic properties of laser welded Ti-Ni shape-memory alloys produced by powder metallurgy. Journal of Materials Processing Technology, 248 . pp. 198-206. ISSN 0924-0136

Bahador, A. and Hamzah, E. and Kondoh, K. and Kawahito, Y. and Junko,, U. and Bakar, T. A. A. (2017) Mechanical and superelastic properties of laser welded Ti–Ni shape-memory alloys produced by powder metallurgy. Journal of Materials Processing Technology, 248 . pp. 198-206. ISSN 0924-0136

Bahri, B. and Shahbakhti, M. and Aziz, A. A. (2017) Real-time modeling of ringing in HCCI engines using artificial neural networks. Energy, 125 . pp. 509-518. ISSN 0360-5442

Bakhsheshi-Rad, H. R. and Hamzah, E. and Tok, H. Y. and Kasiri-Asgarani, M. and Jabbarzare, S. and Medraj, M. (2017) Microstructure, in vitro corrosion behavior and cytotoxicity of biodegradable Mg-Ca-Zn and Mg-Ca-Zn-Bi alloys. Journal of Materials Engineering and Performance, 26 (2). pp. 653-666. ISSN 1059+9495

Bakhsheshi-Rad, H. R. and Hamzah, E. and Dias, G. J. and Saud, S. N. and Yaghoubidoust, F. and Hadisi, Z. (2017) Fabrication and characterisation of novel ZnO/MWCNT duplex coating deposited on Mg alloy by PVD coupled with dip-coating techniques. Journal of Alloys and Compounds, 728 . pp. 159-168. ISSN 0925-8388

Bakhsheshi-Rad, H. R. and Hamzah, E. and Joy Yii, S. L. and Mostafa, A. and Ebrahimi-Kahrizsangi, R. and Medraj, M. (2017) Characterisation and thermodynamic calculations of biodegradable Mg–2.2Zn–3.7Ce and Mg–Ca–2.2Zn–3.7Ce alloys. Materials Science and Technology (United Kingdom), 33 (11). pp. 1333-1345. ISSN 0267-0836

Bakhsheshi-Rad, H. R. and Hamzah, E. and Joy Yii, S. L. and Mostafa, A. and Ebrahimi-Kahrizsangi, R. and Medraj, M. (2017) Characterisation and thermodynamic calculations of biodegradable Mg–2.2Zn–3.7Ce and Mg–Ca–2.2Zn–3.7Ce alloys. Materials Science and Technology (United Kingdom), 33 (11). pp. 1333-1345. ISSN 0267-0836

Bakhsheshi-Rad, H. R. and Hamzah, E. and Low, H. T. and Cho, M .H. and Kasiri-Asgarani, M. and Farahany, S. and Mostafa, A. and Medraj, M. (2017) Thermal characteristics, mechanical properties, in vitro degradation and cytotoxicity of novel biodegradable Zn-Al-Mg and Zn-Al-Mg-xBi alloys. Acta Metallurgica Sinica (English Letters), 30 (3). pp. 201-211. ISSN 1006-7191

Bakhsheshi-Rad, H. R. and Hamzah, E. and Low, H. T. and Kasiri-Asgarani, M. and Farahany, S. and Akbari, E. and Cho, M. H. (2017) Fabrication of biodegradable Zn-Al-Mg alloy: mechanical properties, corrosion behavior, cytotoxicity and antibacterial activities. Materials Science and Engineering C, 73 . pp. 215-219. ISSN 0928-4931

Basha, M. and Sidik, N. A. C. and Beriache, M. (2017) Numerical simulation of fluid flow and heat transfer in rotating channels using parallel lattice Boltzmann method. International Journal of Heat and Mass Transfer, 115 . pp. 158-168. ISSN 0017-9310

Belhocine, A. and Omar, W. Z. W. (2017) Three-dimensional finite element modeling and analysis of the mechanical behavior of dry contact slipping between the disc and the brake pads. International Journal of Advanced Manufacturing Technology, 88 (1-4). pp. 1035-1051. ISSN 0268-3768

Belhocine, A. and Wan Omar, W. Z. (2017) An analytical method for solving exact solutions of the convective heat transfer in fully developed laminar flow through a circular tube. Heat Transfer - Asian Research, 46 (8). pp. 1342-1353. ISSN 1099-2871

Belhocine, A. and Wan Omar, W. Z. (2017) Computational fluid dynamics (CFD) analysis and numerical aerodynamic investigations of automotive disc brake rotor. International Journal on Interactive Design and Manufacturing . pp. 1-17. ISSN 1955-2513 (In Press)

Belhocine, Ali and Omar, Wan Z. W. (2017) Exact Graetz problem solution by using hypergeometric function. International Journal Of Heat And Technology, 35 (2). pp. 347-353. ISSN 0392-8764

Beng, S. W. and Aziz Japar, W. M. A. (2017) Numerical analysis of heat and fluid flow in microchannel heat sink with triangular cavities. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 34 (1). pp. 1-8. ISSN 2289-7879

Che Ku Hitam, Che Ku Nor Liana (2017) Electrosynthesis of copper oxide supported on amorphous titanum dioxide nanoparticles based catalysts for photocatalytic oxidative desulfurization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidik, N. A. and Witri Mohd. Yazid, M. N. A. and Mamat, R. (2017) Recent advancement of nanofluids in engine cooling system. Renewable and Sustainable Energy Reviews, 175 . pp. 137-144. ISSN 1364-0321

Chong, C. T. and Hochgreb, S. (2017) Flame structure, spectroscopy and emissions quantification of rapeseed biodiesel under model gas turbine conditions. Applied Energy, 185 . pp. 1383-1392. ISSN 0306-2619

Ci, W. Y. and Bakar, T. A. A. and Hamzah, E. and Saud, S .N. (2017) Study of X-phase formation on Cu-Al-Ni shape memory alloys with Ti addition. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2770-2779. ISSN 2289-4659

Constontine, Dunsten and Shaharuddin, Nik MohdRidzuan and Yaakob, Omar (2017) Theoretical and experimental study of small scale magneto-hydrodynamic (MHD) ship propulsion. Journal of Transport System Engineering, 4 (2). pp. 15-20. ISSN 2180–3722

Dahalan, M. N. and Suni, A. F. and Ishak, I. S. and Mohd., N. A. R. N. and Mat, S. (2017) Aerodynamic study of air flow over a curved fin rocket. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1). pp. 46-58. ISSN 2289-7879

Dahalan, Md. Nizam (2017) Effectiveness of synthetic jet actuators for separation control on an airfoil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dahlan, A. A. and Shahrafi, M. and Muhamad Said, M. F. (2017) Simulation of intake and exhaust valve timing on internal combustion engine. Jurnal Teknologi, 79 (7-4). pp. 47-52. ISSN 0127-9696

Dambatta, M. S. and Izman, S. and Kurniawan, D. and Hermawan, H. (2017) Processing of Zn-3Mg alloy by equal channel angular pressing for biodegradable metal implants. Journal of King Saud University - Science, 29 (4). pp. 455-461. ISSN 1018-3647

Darminesh, S. P. and Sidik, N. A. C. and Najafi, G. and Mamat, R. and Ken, T. L. and Asako, Y. (2017) Recent development on biodegradable nanolubricant: A review. International Communications in Heat and Mass Transfer, 86 . pp. 159-165. ISSN 0735-1933

Dawood, H. K. and Mohammed, H. A. and Sidik, N. A. C. and Munisamy, K. M. and Alawi, O. A. (2017) Heat transfer augmentation in concentric elliptic annular by ethylene glycol based nanofluids. International Communications in Heat and Mass Transfer, 82 . pp. 29-39. ISSN 0735-1933

Dehghan Pir, M. M. and Rahmandoust, M. and Ochsner, A. (2017) Obtaining global equations for the Young's modulus of perfect and defective carbon nanotubes. Materials Research Express, 4 (12). ISSN 2053-1591

Delavarii, Saeed (2017) Photoreduction of carbon dioxide and methane to formate, acetate derivatives and hydrogen over immobilized titania nanoparticles and nitrogen-doped titania nanotube arrays. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Derakhshan Asl, A. and Wong, K. Y. (2017) Solving unequal-area static and dynamic facility layout problems using modified particle swarm optimization. Journal of Intelligent Manufacturing, 28 (6). pp. 1317-1336. ISSN 0956-5515

Dzahir, M. A. M and Nor, N. S. M. and Azaman, A. and Hussein, M. and Mat Dzahir, M. A. (2017) Pneumatic muscles actuated lower-limb orthosis model verification with actual human muscle activation patterns. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2017, 22 - 23 July 2017, Langkawi, Kedah.

Dzahir, M. A. M. and Nor, N. S. M. and Azaman, A. and Hussein, M. and Mat Dzahir, M. A. (2017) Antagonistic mono- and bi-articular lower-limb muscle activities' model characterization at different speeds. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2017, 22 - 23 July 2017, Langkawi Island, Kedah.

Eek, Rickey Ting Pek and Mohd. Yatim, Hanim and Mat Darus, Intan Z. and Sahlan, Shafishuhaza (2017) Development of controller graphical user interface for vibration suppression of flexible beam. In: 2014 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2014, 28 September - 1 October 2014, Kota Kinabalu, Sabah.

Emhemed, Abdulrahman A. A. and Mamat, Rosbi and Faudzi, Ahmad'Athif Mohd. (2017) Development Of Predictive Control Strategy Using Self-Identification Matrix Technique (SMT). Journal Of Engineering Science And Technology, 12 (7). pp. 1915-1929.

Faheem, Muhammad Asim (2017) The effects of workplace incivility and deviance on turnover intention and job performance among nurses in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Fahmi, Fariq Muhammad and Yahya, Mohd. Yazid and Sulaiman, Khaulah (2017) Improving the performance of solution-processed organic solar cells by incorporating small molecule acceptors into a ternary bulk heterojunction based on DH6T:Mq3:PCBM (M = Ga, Al). Materials Chemistry and Physics, 188 . pp. 86-94. ISSN 0254-0584

Fallahiarezoudar, E. and Ahmadipourroudposht, M. and Yusof, N. M. and Idris, A. and Ngadiman, N. H. A. (2017) 3D biofabrication of thermoplastic polyurethane (TPU)/poly-L-lactic acid (PLLA) electrospun nanofibers containing maghemite (γ-Fe2O3) for tissue engineering aortic heart valve. Polymers, 9 (11). ISSN 2073-4360

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Yusof, Noordin Mohd. and Idris, Ani and Ngadiman, Nor Hasrul Akhmal (2017) 3D Biofabrication of Thermoplastic Polyurethane (TPU)/Poly-l-lactic Acid (PLLA) Electrospun Nanofibers Containing Maghemite (-Fe2O3) for Tissue Engineering Aortic Heart Valve. POLYMERS, 9 (11).

Fallahpour, A. and Wong, K. Y. and Olugu, E. U. and Musa, S. N. (2017) A predictive integrated genetic-based model for supplier evaluation and selection. International Journal of Fuzzy Systems, 19 (4). pp. 1041-1057. ISSN 1562-2479

Fallahpour, Alireza and Ezutah, Udoncy Olugu and Siti, Nurmaya Musa and Wong, Kuan Yew and Noori, Samira (2017) A decision support model for sustainable supplier selection in sustainable supply chain management. Computers and Industrial Engineering, 105 . pp. 391-410. ISSN 0360-8352

Farahany, S. and Ghandvar, H. and Nordin, N. A. and Ourdjini, A. (2017) Microstructure characterization, mechanical, and tribological properties of slow-cooled Sb-treated Al-20Mg2Si-Cu in situ composites. Journal of Materials Engineering and Performance, 26 (4). pp. 1685-1700. ISSN 1059-9495

Farhanah, A. N. and Syahrullail, S. and Ajruddin, M. A. (2017) Evaluation of RBD palm stearin as alternative lubricant for cold forward extrusion process. In: International Conference on Applications and Design in Mechanical Engineering 2017, ICADME 2017, 21 - 22 August 2017, Penang, Malaysia.

Farouk, H. and Zahraee, S. M. and Atabani, A. E. and Mohd. Jaafar, M. N. and Alhassan, F. H. (2017) Optimization of the esterification process of crude jatropha oil (CJO) containing high levels of free fatty acids: a Malaysian case study. Biofuels . pp. 1-8. ISSN 1759-7269 (In Press)

Fatima, N. and Ahmed, M. M. and Karimov, K. S. and Ahmad, Z. and Muhammad, F. F. (2017) Optical sensors based on the NiPc-CoPc composite films deposited by drop casting and under the action of centrifugal force. Chinese Physics B, 26 (6). ISSN 1674-1056

Fouladinejad, N. and Fouladinejad, N. and Jalil, M. K. A. and Taib, J. M. (2017) Decomposition-assisted computational technique based on surrogate modeling for real-time simulations. Complexity, 2017 . ISSN 1076-2787

Ganesan, P. B. and Tariqul Islam, M. and Pokrajac, D. and Hamad, F. A. and Sandaran, S. C. (2017) Coalescence and rising behavior of co-axial and lateral bubbles in viscous fluid: a CFD study. Asia-Pacific Journal of Chemical Engineering, 12 (4). pp. 605-619. ISSN 19322135

Ganjehkaviri, A. and Mohd. Jaafar, M. N. and Hosseini, S. E. and Barzegaravval, H. (2017) Genetic algorithm for optimization of energy systems: Solution uniqueness, accuracy, Pareto convergence and dimension reduction. Energy, 119 . S125-S127. ISSN 0360-5442

Ganjehkaviri, A. and Yusof, M. and Mohd. Jaafar, M. N. (2017) Effects of duct burner on bottoming cycle in a combined cycle power plant. Jurnal Teknologi, 79 (7-3). pp. 27-32. ISSN 0127-9696

Ghaderian, J. and Sidik, N. A. C. (2017) An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector. International Journal of Heat and Mass Transfer, 108 . pp. 972-987. ISSN 0017-9310

Ghaderian, J. and Sidik, N. A. C. and Kasaeian, A. and Ghaderian, S. and Okhovat, A. and Pakzadeh, A. and Samion, S. and Yahya, W. J. (2017) Performance of copper oxide/distilled water nanofluid in evacuated tube solar collector (ETSC) water heater with internal coil under thermosyphon system circulations. Applied Thermal Engineering, 121 . pp. 520-536. ISSN 1359-4311

Ghaderian, Javad and Che Sidik, Nor Azwadi (2017) An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector. International Journal of Heat and Mass Transfer, 108 . pp. 972-987. ISSN 0017-9310

Ghadimi, P. and Dargi, A. and Heavey, C. (2017) Sustainable supplier performance scoring using audition check-list based fuzzy inference system: A case application in automotive spare part industry. Computers and Industrial Engineering, 105 . pp. 12-27. ISSN 0360-8352

Ghanaati, A. and Muhamad Said, M. F. and Darus, I. Z. M. (2017) Comparative analysis of different engine operating parameters for on-board fuel octane number classification. Applied Thermal Engineering, 124 . pp. 327-336. ISSN 1359-4311

Ghanaati, Ali (2017) Application of artificial neural network to classify fuel octane number using essential engine operating parameters. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghandvar, H. and Idris, M. H. and Ahmad, N. and Moslemi, N. (2017) Microstructure development, mechanical and tribological properties of a semisolid A356/xSiCp composite. Journal of Applied Research and Technology, 15 (6). pp. 533-544. ISSN 1665-6423

Ghani, I. A. and Kamaruzaman, N. and Sidik, N. A. C. (2017) Heat transfer augmentation in a microchannel heat sink with sinusoidal cavities and rectangular ribs. International Journal of Heat and Mass Transfer, 108 . pp. 1969-1981. ISSN 0017-9310

Ghani, I. A. and Sidik, N. A. C. and Kamaruzaman, N. (2017) Hydrothermal performance of microchannel heat sink: The effect of channel design. International Journal of Heat and Mass Transfer, 107 . pp. 21-44. ISSN 0017-9310

Ghani, Ihsan Ali (2017) Heat transfer analysis in multi-configuration microchannel heat sink. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghani Al-Mashhadani, Ihsan Ali and Che Sidik, Nor Azwadi and Kamaruzaman, Natrah and Yahya, Wira Jazair and Mahian, Omid (2017) The effect of manifold zone parameters on hydrothermal performance of micro-channel heatsink: a review. International Journal of Heat and Mass Transfer, 109 . pp. 1143-1161. ISSN 0017-9310

Ghani Al-Mashhadani, Ihsan Ali and Kamaruzaman, Natrah and Che Sidik, Nor Azwadi (2017) Heat transfer augmentation in a microchannel heat sink with sinusoidal crossmark cavities and rectangular ribs. International Journal of Heat and Mass Transfer, 108 . pp. 1969-1981. ISSN 0017-9310

Gholami, A. and Wahid, M. A. and Mohammed, H. A. (2017) Thermal–hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns. International Journal of Heat and Mass Transfer, 106 . pp. 573-592. ISSN 0017-9310

Gholami, Ahmadali and Abdul Wahid, Mazlan and Hussein, A. Mohammed (2017) Thermal-hydraulic performance of fin-and-oval tube compact heat exchangers with innovative design of corrugated fin patterns. International Journal of Heat and Mass Transfer, 106 . pp. 573-592. ISSN 0017-9310

Gholami, Hamed (2017) Student relationship management factors for higher education sustainability using novel multi-method approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gholampour, Gholamreza (2017) Strategic and operational performance framework for automotive supply chain in Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hadi, M. Sukri and Mat Darus, Intan Zaurah and Eek, R. T. Pek and Mohd. Yatim, H. (2017) Swarm intelligence for modeling a flexible plate structure system with clamped-clamped-free-free boundary condition edges. In: 2014 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2014, 28 September - 1 October 2014, Kota Kinabalu, Sabah.

Hamdan, S. H. and Chong, W. W. F. and Ng, J. H. and Chong, C. T. and Rajoo, S. (2017) A study of the tribological impact of biodiesel dilution on engine lubricant properties. Process Safety and Environmental Protection, 112 . pp. 288-297. ISSN 0957-5820

Hamdan, S. H. and Chong, W. W. F. and Ng, J. H. and Ghazali, M. J. and Wood, R. J. K. (2017) Influence of fatty acid methyl ester composition on tribological properties of vegetable oils and duck fat derived biodiesel. Tribology International, 113 . pp. 76-82. ISSN 0301-679X

Hamedan, Hazrel (2017) Improvement on pressure distribution for venturi tube flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, M. H. and Sidik, N. A. C. and Ken, T. L. and Mamat, R. and Najafi, G. (2017) Factors affecting the performance of hybrid nanofluids: A comprehensive review. International Journal of Heat and Mass Transfer, 115 . pp. 630-646. ISSN 0017-9310

Harun, Zambri and Hashim, Hashimah and Mansor, Shuhaimi and Mohamed, Zamri and Mahmud, Abdus Samad and Ahmad, Kamarul Arifin (2017) A survey on engineering ethics and technological advancement among Malaysian public university students. In: 8th IEEE International Conference on Engineering Education, ICEED 2016, 7 - 8 December 2016, Kuala Lumpur, Malaysia.

Hasan, Mohd. Faizal and Mohd. Salleh, Abdul Halim and Shamsuddin, Hielfarith Suffri and Mohd. Fuad, Muhammad Ariff Hanaffi and Abdul Latiff, Zulkarnain and Abdul Rahman, Mohd. Rosdzimin (2017) Torrefaction of pulverized empty fruit bunch and polyethylene plastics waste mixture. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 29 (1). pp. 1-9. ISSN 2289-7879

Hassan, A. W. and Noordin, M. Y. and Izman, S. and Denni, K. (2017) Effect of carburizing and annealing processes in improving the Ni/WC–Co adhesion strength. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering . ISSN 0954-4089 (In Press)

Hassan, M. F. and Saman, M. Z. M. and Mahmood, S. and Nor, N. H. M. and Rahman, M. N. A. (2017) Sustainability assessment methodology in product design: a review and directions for future research. Jurnal Teknologi, 79 (1). pp. 37-44. ISSN 0127-9696

Hassan, Mohd. Fahrul and Mahmood, Salwa and Mat Saman, Muhamad Zameri and Sharif, Safian and Sapuan, Syarfa Zahirah (2017) Application of product sustainability evaluation tool (ProSET) on car seat design configurations. Page 1 International Journal of Mechanical & Mechatronics Engineering, 17 (3). pp. 88-97. ISSN 2227-2771

Hassen, N. S. and Sidik, N. A. C. (2017) Assessment of atomization parameters for flat fan nozzles based on wind tunnel measurements. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 38 (1). pp. 1-9. ISSN 2289-7879

Hazwan, M. H. M. and Shayfull, Z. and Sharif, S. and Nasir, S. M. and Rashidi, M. M. (2017) Warpage optimisation on the moulded part using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO). In: 2016 Engineering Technology International Conference, ETIC 2016, 5 - 6 August 2016, Ho Chi Minh City, Vietnam.

Hazwan, M. H. M. and Shayfull, Z. and Sharif, S. and Nasir, S. M. and Rashidi, M. M. (2017) Warpage optimisation on the moulded part with conformal cooling channels using Response Surface Methodology (RSM) and Glowworm Swarm Optimisation (GSO). In: 2016 Engineering Technology International Conference, ETIC 2016, 5 - 6 August 2016, Ho Chi Minh City, Vietnam.

Helmi, Syed Ahmad and Nordin, Nur Nashwa and Hisjam, Muhammad (2017) Errors prevention in manufacturing process through integration of Poka Yoke and TRIZ. In: 3rd International Materials, Industrial and Manufacturing Engineering Conference, MIMEC 2017, 6 - 8 December 2017, Miri, Sarawak.

Herman, S. and Ismail, K. (2017) Single camera object detection for self-driving vehicle: a review. Journal of the Society of Automotive Engineers Malaysia (JSAEM), 1 (3). pp. 198-207. ISSN 2600-8092

Ho, G. S. and Faizal, H. M. and Ani, F. N. (2017) Microwave induced plasma for solid fuels and waste processing: A review on affecting factors and performance criteria. Waste Management, 69 . pp. 423-430. ISSN 0956-053X

Hochgreb, Simone and Chong, Cheng Tung (2017) Flame structure, spectroscopy and emissions quantification of rapeseed biodiesel under model gas turbine conditions. Applied Energy, 185 . pp. 1383-1392. ISSN 0306-2619

Hooi-Siang, K. and Jalil, M. K. A. and Kee-Quen, L. (2017) Virtual reality for low-cost automotive driving simulator in vehicle engineering research. Jurnal Teknologi, 79 (7). pp. 71-81. ISSN 0127-9696

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and Mamat, R. and Sidik, N. A. C. and Azmi, W. H. (2017) The effect of combustion management on diesel engine emissions fueled with biodiesel-diesel blends. Renewable and Sustainable Energy Reviews, 73 . pp. 307-331. ISSN 1364-0321

Hoseini, S. S. and Najafi, G. and Ghobadian, B. and Rahimi, A. and Yusaf, T. and Mamat, R. and Sidik, N. A. C. and Azmi, W. H. (2017) Effects of biodiesel fuel obtained from Salvia macrosiphon oil (ultrasonic-assisted) on performance and emissions of diesel engine. Energy, 131 . pp. 289-296. ISSN 0360-5442

Hosseini, S. E. and Barzegaravval, H. and Ganjehkaviri, A. and Wahid, M. A. and Mohd. Jaafar, M. N. (2017) Modelling and exergoeconomic-environmental analysis of combined cycle power generation system using flameless burner for steam generation. Energy Conversion and Management, 135 . pp. 362-372. ISSN 0196-8904

Hourmand, M. and Sarhan, A. A. D. and Noordin, M. Y. (2017) Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine. Measurement: Journal of the International Measurement Confederation, 97 . pp. 64-78. ISSN 0263-2241

Hudzori, Afzan (2017) Optimization model of large scale rainwater harvesting system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hwa, L. C. and Rajoo, S. and Noor, A. M. and Ahmad, N. and Uday, M. B. (2017) Recent advances in 3D printing of porous ceramics: A review. Current Opinion in Solid State and Materials Science, 21 (6). pp. 323-347. ISSN 1359-0286

Ibrahim, Fatin Athirah (2017) System dynamics in project management: assessing the impacts of quality failure on project performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, N. I. and Al Sulaiman, F. A. and Ani, F. N. (2017) Performance characteristics of a solar driven lithium bromide-water absorption chiller integrated with absorption energy storage. Energy Conversion and Management, 150 . pp. 188-200. ISSN 0196-8904

Ishak, I. S. and Mougamadou Zabaroulla, M. F. (2017) Effects of helicopter horizontal tail configurations on aerodynamic drag characteristics. Jurnal Teknologi, 79 (7-4). pp. 67-72. ISSN 0127-9696

Ismail, Nur Suhaili (2017) Development of transparent and flexible graphene coated electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Israr, H. A. and Wong, K. J. and Tamin, M. N. (2017) Cohesive zone modelling of mode III delamination using the edge crack torsion test. Journal of Mechanical Engineering and Sciences, 11 (1). pp. 2526-2538. ISSN 2289-4659

Jaafar, M. N. M. and Rahim, M. R. and Salleh, M. N. M. (2017) Kajian prestasi penggunaan bahan api envo-diesel dalam sistem pembakaran. Jurnal Teknologi, 79 (3). pp. 39-44. ISSN 0127-9696

Jamal, Siti Khalijah and Abu Hassan, Shukur and Wong, King Jye and Abdul Hanan, Umar and Roslan, Mohd. Nazrul (2017) The influence of woven density on tensile properties of hybrid kenaf/glass composites. Journal of Applied Environmental and Biological Sciences, 7 (7). pp. 1460-166. ISSN 2090-4274

Jamal, Siti Khalijah and Abu Hassan, Shukur and Wong, King Jye and Yahya, Mohd. Yazid (2017) Flexural and interlaminar shear study of hybrid woven kenaf/recycled GFRP (rGFRP) composites subjected to bending load. International Journal of Advanced And Applied Sciences (IJAAS), 4 (3). pp. 45-50. ISSN 2313-3724

Jamaluddin, M. S. and Rahman, M. M. and Hasan, M. F. and Saat, A. and Wahid, M. A. (2017) Performance evaluation of a small-scale solar driven refrigeration system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 36 (1). pp. 10-20. ISSN 2289-7879

Jamaludin, Fahd Ezadee (2017) Fatigue analysis of catenary offset buoyant riser assembly(COBRA) concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jauhari, W. A. and Mayangsari, S. and Kurdhi, N. A. and Wong, K. Y. (2017) A fuzzy periodic review integrated inventory model involving stochastic demand, imperfect production process and inspection errors. Cogent Engineering, 4 (1). ISSN 2331-1916

Javaid, M. Y. and Ovinis, M. and Hashim, F. B. M. and Maimun, A. and Ahmed, Y. M. and Ullah, B. (2017) Effect of wing form on the hydrodynamic characteristics and dynamic stability of an underwater glider. International Journal of Naval Architecture and Ocean Engineering, 9 (4). pp. 382-389. ISSN 2092-6782

Javaid, M. Y. and Ovinis, M. and Thirumalaiswamy, N. and Hashim, F. B. M. and Ullah, B. and Maimun, A. (2017) Numerical investigation on the hydrodynamic characteristics of an autonomous underwater glider with different wing layouts. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2588-2592. ISSN 1819-6608

Jeyabalan, Harindharan and Ooi, Ching Sheng and Hui, Kar Hoou and Lim, Meng Hee and Leong, Mohd. Salman (2017) An improved turbomachinery conditionmonitoring method using multivariate statistical analysis. International Journal of Mechanical Engineering and Technology, 8 (5). pp. 1147-1159. ISSN 0976-6340

Jimat, Nur Shaqilah (2017) Safety improvement at shipyard practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jomehzadeh, Fatemeh and Nejat, Payam and John, Kaiser Calautit and Mohd. Yusof, Mohd. Badruddin and Shaikh Salim, Sheikh Ahmad Zaki and Ben, Richard Hughes and Muhammad Yazid, Muhammad Noor Afiq Witri (2017) A review on windcatcher for passive cooling and natural ventilation in buildings, part 1: indoor air quality and thermal comfort assessment. Renewable and Sustainable Energy Reviews, 70 . pp. 736-756. ISSN 1364-0321

Jumari, Rozazila (2017) Determination of work-rest schedule based on fatigue among welders at construction of marine facility Pengerang project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, M. S. M. and Yahya, M. Y. M. and Mustafa, Z. and Ahmad, H. A. I. (2017) Effect of layering pattern on mechanical and water absorption properties of glass/flax reinforced epoxy. Jurnal Teknologi, 79 (5-2). pp. 89-93. ISSN 0127-9696

Kafuku, John Mbogo (2017) A decision making tool for remanufacturing operations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamar, H. M. and Kamsah, N. and Liq, K. J. (2017) Indoor air of a double-storey residential house in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 31 (1). pp. 11-18. ISSN 2289-7879

Kamaruddin, Samira Albati and Mustafa, M. Bob and Wan Ishak, Wan Mohd Faizal and Ngien, Su Kong and Motasem, Alazaiza Y. D. (2017) Assessment of the behaviour of soil structure in double-porosity kaolin media using light transmission visualization (LTV) method. International Journal of Geotechnical Engineering, 11 (3). pp. 316-320. ISSN 1938-6362

Kamaruzaman, Anis Farhan and Mohd. Zain, Azlan and Mustaffa, Noorfa Haszlinna and Mohd. Yusof, Noordin and Najarian, Farhad (2017) Roundness error in deep hole drilling using twist drills and cold mold steel 718. Indian Journal of Science and Technology, 10 (17). ISSN 0974-6846

Kanamuthy, Dharma Raj (2017) Experimental determination of damping property of structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kang, H. S. and Kim, M. H. and Aramanadka, S. S. B. (2017) Tension variations of hydro-pneumatic riser tensioner and implications for dry-tree interface in semisubmersible. Ocean Systems Engineering, 7 (1). pp. 21-38. ISSN 2093-6702

Kang, H. S. and Kim, M. H. and Aramanadka, S. S. B. and Kang, H. Y. and Lee, K. Q. (2017) Suppression of tension variations in hydro-pneumatic riser tensioner by using force compensation control. Ocean Systems Engineering, 7 (3). pp. 225-246. ISSN 2093-6702

Kang, H. S. and Tang, C. H. H. and Quen, L. K. and Steven, A. and Yu, X. (2017) Parametric resonance avoidance of offshore crane cable in subsea lowering operation through A* Heuristic planner. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2422-2433. ISSN 0975-1033

Kang, Hooi Siang and Tang, Howe Hing and Lee, Kee Quen and Steven, Adelina and Yu, Xiaochuan (2017) Prediction on parametric resonance of offshore crane cable for lowering subsea structures. In: IEEE International Conference on Underwater System Technology: Theory and Applications (USYS) 2016, 2016, Penang, Malaysia.

Kang, Hooi-Siang and Shaharuddin, Mohd. Qisti Hakim and Lee, Kee-Quen and Steven, Adelina and Md. Arif, Ummul Ghafir and Khaliddin, Nurhaslinda and Siow, Chee-Loon (2017) Numerical analysis of point absorber for wave energy conversion in Malaysian seas. Progress in Energy and Environment, 1 (1). pp. 25-39. ISSN 2600-7762

Kar, Hoou Hui and Meng, Hee Lim and Ali Al-Obaidi, Salah Mahdi and Leong, Mohd. Salman @ Yew Mun (2017) Dempster-shafer evidence theory for multi-bearing faults diagnosis. Engineering Applications of Artificial Intelligence, 57 . pp. 160-170. ISSN 0952-1976

Kasim, Khushairi Amri (2017) Propeller locations study on delta-winged unmanned aerial vehicle (UAV) model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kchaou, M. and Mat Lazim, A. R. and Abdul Hamid, M. K. and Abu Bakar, A. R. (2017) Experimental studies of friction-induced brake squeal: Influence of environmental sand particles in the interface brake pad-disc. Tribology International, 110 . pp. 307-317. ISSN 0301-679X

Keat, K. C. and Mohd. Yasin, M. F. and Wahid, M. A. and Saat, A. and Md. Yudin, A. S. (2017) Computational study on combustion and emission characteristic of piloted flames by varying composition CO2 of simulated biogas. Jurnal Teknologi, 79 (7-3). pp. 89-95. ISSN 0127-9696

Keng, Yinn Wong and Mohamed Kamar, Haslinda and Kamsah, Nazri and Mohd. Zawawi, Fazila and Deris, Muhd. Suhaimi (2017) Clean room performance testing in hospital's vascular interventional radiology laboratory. International Journal of Mechanical And Production Engineering, 5 (10). pp. 86-91. ISSN 2320-2092

Keng, Yinn Wong and Mohamed Kamar, Haslinda and Kamsah, Nazri and Tan, Huiyi and Deris, Muhd. Suhaimi (2017) Real-time measurements of relative humidity and temperature in hospital operating room. International Journal of Mechanical And Production Engineering, 5 (10). pp. 92-95. ISSN 2320-2092

Khairuddin, M. H. and Bahri, M. F. S. and Dahlan, A. A. and Mohammad, M. and Muhamad Said, M. F. (2017) Simulation analysis of spark ignition engine intake manifold for better performance. Jurnal Teknologi, 79 (7-4). pp. 15-21. ISSN 0127-9696

Khalajabadi, S. Z. and Ahmad, N. and Izman, S. and Abu, A. B. and Haider, W. and Abdul Kadir, M. R. (2017) In vitro biodegradation, electrochemical corrosion evaluations and mechanical properties of an Mg/HA/TiO2 nanocomposite for biomedical applications. Journal of Alloys and Compounds, 696 . pp. 768-781. ISSN 0925-8388

Khattak, M. A. and Mukhtar, A. and Anjum, M. W. and Afaq, S. K. and Ahad, M. A. and Khan, M. and Kazi, S. and Badshah, S. and Khan, R. (2017) Performance evaluation of four-stroke SI (spark ignition) engine using ethanol-gasoline blend E50 at variable load and compression ratio. Jurnal Teknologi, 79 (1). pp. 63-68. ISSN 0127-9696

Khoo, S. J. and Johar, M. and Low, K. O. and Wong, K. J. (2017) Interfacial shear strength characterisation of alkali treated bamboo bundle\x96polyester composites using an improved technique. Plastics, Rubber and Composites, 46 (10). pp. 450-457. ISSN 1465-8011

Khushairi, M. T. M. and Sharif, S. and Jamaludin, K. R. and Mohruni, A. S. (2017) Effects of metal fillers on properties of epoxy for rapid tooling inserts. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1155-1161. ISSN 2088-5334

Kianpour, E. and Sidik, N. A. C. (2017) A comparison of cylindrical and row trenched film-cooling holes on a combustor endwall surface at high blowing ratio. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 30 (1). pp. 1-11. ISSN 2289-7879

Kianpour, Ehsan and Che Sidik, Nor Azwadi (2017) A detailed study of effects of row trenched holes at the combustor exit on film cooling effectiveness. Journal of the Serbian Society for Computational Mechanics, 11 (1). pp. 59-68. ISSN 1820-6530

Kiu, S. S. K. and Yusup, S. and Soon, C. V. and Arpin, T. and Samion, S. and Kamil, R. N. M. (2017) Tribological investigation of graphene as lubricant additive in vegetable oil. Journal of Physical Science, 28 . pp. 257-267. ISSN 1675-3402

Koloor, S. S. R. and Ayatollahi, M. R. and Tamin, M. N. (2017) Elastic-damage deformation response of fiber-reinforced polymer composite laminates with lamina interfaces. Journal of Reinforced Plastics and Composites, 36 (11). pp. 832-849. ISSN 0731-6844

Kori, M. I. and Osman, K. and Taib, I. (2017) Hemodynamic prediction in patent ductus arteriosus morphologies. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3156-3160. ISSN 1819-6608

Kyung, Hee Park and Suhaimi, Mohd. Azlan and Yang, Gi-Dong and Lee, Dong-Yoon and Seok, Woo Lee and Kwon, Patrick (2017) Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing, 18 (1). pp. 5-14. ISSN 2234-7593

Lam, Jostinah and Supriyanto, Eko and Yahya, Faris and Satria, Muhammad Haikal and Kadiman, Suhaini and Azan, Aizai and Soesanto, Amiliana (2017) Online adaptive coronary heart disease risk prediction model. In: 21st International Conference on Circuits, Systems, Communications and Computers, CSCC 2017, 14 - 17 July 2017, Heraklion, Crete.

Lam, S. S. and Wan Mahari, W. A. and Jusoh, A. and Chong, C. T. and Lee, C. L. and Chase, H. A. (2017) Pyrolysis using microwave absorbents as reaction bed: An improved approach to transform used frying oil into biofuel product with desirable properties. Journal of Cleaner Production, 147 . pp. 263-272. ISSN 0959-6526

Lee, C. S. and Wong, K. Y. (2017) A fuzzy logic-based knowledge management performance measurement system for SMEs. Cybernetics and Systems, 48 (4). pp. 277-302. ISSN 0196-9722

Lee, Cheng Sheng (2017) A knowledge management performance measurement system for small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Kee Quen and Abu, Aminudin and Muhamad, Pauziah and Sahekhaini, Asnizah and Tan, Lit Ken and Kang, Hooi Siang (2017) Prediction of vortex-induced vibration of bare cylinder and cylinder fitted with helical strakes. In: The 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), 2016, China.

Lee, Kee Quen and Tang, Howe Hing and Hooi, Siang Kang and Gang, Ma (2017) Neural-network prediction of riser top tension for vortex induced vibration suppression. In: IEEE International Conference on Underwater System Technology: Theory and Applications (USYS), 2016, Penang, Malaysia.

Leong, Swee Kim (2017) Microwave-assisted pyrolysis of crude glycerol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Leong, Swee Kim and Ani, Farid Nasir and Chong, Cheng Tung (2017) Production of syngas from controlled microwave-assisted pyrolysis of crude glycerol. In: International Conference on Material Science and Engineering, ICMSE 2016, 24 - 26 June 2016, Guangzhou, China.

Li, X. and Yahya, M. Y. and Nia, A. B. and Wang, Z. (2017) Dynamic failure of basalt/epoxy laminates under blast—Experimental observation. International Journal of Impact Engineering, 102 . pp. 16-26. ISSN 0734743X

Li, X. and Zhang, X. and Zhang, H. and Yang, J. and Nia, A. B. and Chai, G. B. (2017) Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets. Composite Structures, 163 . pp. 21-31. ISSN 0263-8223

Li, Xin and Amin, Bassiri Nia and Ma, Xiaomin and Yahya, Mohd. Yazid and Wang, Zhihua (2017) Dynamic response of kevlar (R) 29/epoxy laminates under projectile impact- experimental investigation. Mechanics of Advanced Materials and Structures, 24 (2). pp. 114-121. ISSN 1537-6494

Liew, P. J. and Shaaroni, A. and Sidik, N. A. C. and Yan, J. (2017) An overview of current status of cutting fluids and cooling techniques of turning hard steel. International Journal of Heat and Mass Transfer, 114 . pp. 380-394. ISSN 0017-9310

Lotfi, M. and Ashrafi, H. and Amini, S. and Akhavan Farid, A. and Jahanbakhsh, M. (2017) Characterization of various coatings on wear suppression in turning of Inconel 625: a three-dimensional numerical simulation. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231 (6). pp. 734-744. ISSN 1350-6501

Lu, Alex Chia Yang (2017) Microwave pyrolysis of scrap tires and its pyrolysis oil performance in diesel engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Madadi, Najmeh and Ma'aram, Azanizawati and Kuan, Yew Wong (2017) A simulation-based product diffusion forecasting method using geometric Brownian motion and spline interpolation. Cogent Business and Management, 4 (130099). pp. 1-16. ISSN 2331-1975

Maharam, A. R. (2017) Erosion prediction of bypass seat in oil well auto-fill equipment using CFD approach. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 34 (1). pp. 9-18. ISSN 2289-7879

Mahmud, Amirul Haniff and Che Daud, Zul Hilmi and Asus, Zainab (2017) The impact of battery operating temperature and state of charge on the lithium-ion battery internal resistance. Jurnal Mekanikal, 40 (1). pp. 1-8. ISSN 2289-38763

Mahzun, Ahmad Ajruddin (2017) The effect of different lubricating oil on billet in cold work extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malik, A. A. and Ahmad Fuad, A. F. and Ahmad, M. Z. and Osnin, N. A. (2017) The establishment of minimum luminous range for existing lighthouses in the age of global navigation satellite system by limiting the luminous range within geographical range. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1922-1925. ISSN 1819-6608

Malik, M. S. A. and Mohamad Shaiful, A. I. and Mohd. Ismail, M. S. and Mohd. Jaafar, M. N. and Sahar, A. M. (2017) Combustion and emission characteristics of coconut-based biodiesel in a liquid fuel burner. Energies, 10 (4). ISSN 1996-1073

Maliki, A. Yazid and Musa, M. Azlan and Ahmad, M. F. and Zamri, I. and Omar, Y. (2017) Comparison Of Numerical And Experimental Results For Overtopping Discharge Of The Obrec Wave Energy Converter. Journal Of Engineering Science And Technology, 12 (5). pp. 1337-1353. ISSN 1823-4690

Mamat, Mohd. Iqmal (2017) Design and simulation of a dental implant for the Indonesian population. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Manaf, M. Z. A. and Mat, S. and Mansor, S. and Nasir, M. N. and Lazim, T. M. and Ali, W. K. W. and Omar, W. Z. W. and Ali, Z. M. and Abdullatif, A. and Wahid, M. A. and Dahalan, M. N. and Othman, N. (2017) Influences of external store on aerodynamic performance of UTM-LST generic light aircraft model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 39 (1). pp. 36-46. ISSN 2289-7879

Mansor, Shuhaimi and Nogoud, Yasser and Mat, Shabudin and Dahalan, Md. Nizam and Abdul-latif, Ainullotfi (2017) Superaugmented pitching motion of UTM CAMAR UAV using advanced flying handling qualities. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1). pp. 27-37. ISSN 2289-7879

Mas Rosemal Hakim, Mas Omar and Mailah, Musa (2017) Heat-based automated on-the-road painting machine. Jurnal Mekanikal, 40 (1). pp. 53-70. ISSN 2289-3873

Mas Rosemal Hakim, Mas Omar (2017) Development of a semi-automated on-the-road painting machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Daut, Mohammad Azhar and Hassan, Mohammad Yusri and Abdullah, Hayati and Abdul Rahman, Hasimah and Abdullah, Md. Pauzi and Hussin, Faridah (2017) Building electrical energy consumption forecasting analysis using conventional and artificial intelligence methods: a review. Renewable and Sustainable Energy Reviews, 70 . pp. 1108-1118. ISSN 1364-0321

Mat Dzahir, Mohd. Azwarie (2017) System identification and speed control of electro- mechanical dual acting pulley continuously variable transmission. PhD thesis, Universiti Teknologi Malaysia.

Mazalan, Nor Azizi and Abdul Malek, Azlan and Abdul Wahid, Mazlan and Mailah, Musa (2017) Sensitivity analysis on neural network algorithm for primary superheater spray modeling. Heat Transfer Engineering, 38 (4). pp. 417-422. ISSN 0145-7632

Mazali, I. I. and Tawi, K. B. and Supriyo, B. and Husain, N. A. and Kob, M. S. C. and Kob, M. S. C. (2017) Transmission ratio calibration for electro-mechanically actuated continuously variable transmission. International Journal of Advanced Mechatronic Systems, 7 (3). pp. 127-133. ISSN 1756-8412

Md. Ali, Muhammad Nasir (2017) Heat transfer characterization of air circulation inside a system of stackable electronic devices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Saad, A. P. and Abdul Rahim, R. A. and Harun, M. N. and Basri, H. and Abdullah, J. and Abdul Kadir, M. R. and Syahrom, A. (2017) The influence of flow rates on the dynamic degradation behaviour of porous magnesium under a simulated environment of human cancellous bone. Materials and Design, 122 . pp. 268-279. ISSN 0264-1275

Md. Sirat, Rozlina (2017) Relationship between ergonomics and safety culture among safety and health officers in manufacturing companies in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Meng, Weijun and Xu, Xiangnan and Cheng, Kian Kai and Xu, Jingjing and Shen, Guiping and Wu, Zhidan and Dong, Jiyang (2017) Geographical Origin Discrimination of Oolong Tea (TieGuanYin, Camellia sinensis (L.) O. Kuntze) Using Proton Nuclear Magnetic Resonance Spectroscopy and Near-Infrared Spectroscopy. Food Analytical Methods, 10 (11). ISSN 1936-9751

Mesbah, R. (2017) Software dynamic pricing by an optimization deterministic model in a monopolistic market. Cogent Engineering, 4 (1). ISSN 2331-1916

Mispan, Ainol Izzat (2017) Micro vibration of rubber tip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moen, Muhammad Amirrul Amin (2017) Experimental evaluation on the tribological properties of palm kernel oil by adding copper oxide nanoparticle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Azizah and Mohd. Zain, Azlan and Ahmad, Nor Bahiah and Mohd. Yusof, Noordin and Najarian, Farhad (2017) Roundness error study in deep hole drilling of cold mold steel 718. Indian Journal of Science and Technology, 10 (13). ISSN 0974-6846

Mohamad, Norlizaa (2017) The impact of work-rest scheduling on prolonged standing activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Shafie, N. A. and Muhamad Said, M. F. and Abdul Latiff, Z. and Rajoo, S. (2017) Discharge and flow coefficient analysis in internal combustion engine using computational fluid dynamics simulation. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2598-1603. ISSN 1819-6608

Mohamed Elshwaini, Amad Elddein Issa (2017) Performance of coolant strategies when turning hardened martensitic stainless steel using tialn coated carbide tool. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad, M. and Buang, M. M. A. and Dahlan, A. A. and Khairuddin, M. H. and Muhamad Said, M. F. (2017) Simulation of automotive exhaust muffler for tail pipe noise reduction. Jurnal Teknologi, 79 (7-4). pp. 37-45. ISSN 0127-9696

Mohammad, Tahir (2017) Mixed-mode II + III delamination behaviour of flax / epoxy laminated composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Arqam, Mohammad Arqam (2017) Performance simulation of pem fuel cell powertrains for all-terrain vehicles (ATVs). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed, F. and Selim, S. Z. and Hassan, A. and Syed, M. N. (2017) Multi-period planning of closed-loop supply chain with carbon policies under uncertainty. Transportation Research Part D: Transport and Environment, 51 . pp. 146-172. ISSN 1361-9209

Mohd., N. A. R. N. and Barakos, G. (2017) Performance and wake analysis of rotors in axial flight using computational fluid dynamics. Journal of Aerospace Technology and Management, 9 (2). pp. 184-193. ISSN 1984-9648

Mohd. Dahuri, Mohd. Khairulanwar and Hussain, Mohd. Nasir and Mohd. Yusof, Nor Fasiha and Abdul Jalil, Mohamad Kasim (2017) Factors, effects, and preferences on vehicle driving modification for the Malaysia independent disabled driver. Journal of the Society of Automotive Engineers Malaysia, 1 (2). pp. 103-110. ISSN 2550-2239

Mohd. Noor, S. F. and Ahmad, N. and Khattak, M. A. and Khan, M. S. and Mukhtar, Anique and Kazi, S. and Badshah, Saeed and Khan, Rafiullah (2017) Application of sayong ball clay membrane filtration for Ni (II) removal from industrial wastewater. Journal of Taibah University for Science, 11 (6). pp. 949-954. ISSN 1658-3655

Mohd. Rofi, Mohd. Ramdan and Sukmana, Irza and Rashidi, Nur Syazana and Mat Noor, Noor Jasmawati and Abdul Kadir, Mohammed Rafiq and Syahrom, Ardiyansyah (2017) Three-dimensional advance dynamic culture system promotes microvessel development from cultured endothelial cells in vitro. ARPN Journal of Engineering and Applied Sciences, 12 (2). pp. 371-376. ISSN 1819-6608

Mohd. Said, Muhammad Ehsan and Md. Arif, Ummul Ghafir and Kamaruddin, Muhammad Hanis and Lee, Kee-Quen and Kang, Hooi-Siang (2017) Suppression of sloshing in liquefied natural gas during ocean-going transportation by using spherical floaters and blanket. Journal of Transport System Engineering, 4 (2). pp. 1-8. ISSN 2289-9790

Mohd. Sokri, Mohd. Naif Hanis (2017) Corrosion performance of zn-al-mg coated steel wire rod for offshore application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yamin, Ahmad Hafizal and Mat Darus, Intan Zaurah and Mohd. Nor, Nur Safwati and Ab. Talib, Mat Hussin (2017) Semi-active suspension system using MR damper with PSO skyhook and sensitivity analysis of PID controller. Journal of Advanced Research in Applied Mechanics, 33 (1). pp. 1-8. ISSN 2289-7895

Mohd. Yatim, Hanim and Mat Darus, Intan Z. and Hadi, Muhamad Sukri (2017) Modeling of flexible manipulator structure using particle swarm optimization with Explorer. In: 2014 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2014, 28 September - 1 October 2014, Kota Kinabalu, Sabah.

Mohd. Yusof, Adibah Fatihah (2017) The optimization of turret location on FPSO in Malaysia seawater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusop, Zulkifli (2017) Passive and active assistive writing devices in suppressing hand tremor. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zain, Nadhirah and Mat, Shabudin and Kasim, Khushairi Amri and Mansor, Shuhaimi and Dahalan, Md. Nizam and Othman, Norazila (2017) Wind tunnel experiments on a generic sharp-edge delta wing UAV model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 40 (1). pp. 18-26. ISSN 2289-7879

Mohebbi, M. and Abdul Aziz, A. and Hosseini, V. and Ramzannezhad, M. and Shafaghat, R. (2017) Evaluation of the main operating parameters of a homogeneous charge compression ignition engine for performance optimization. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231 (8). pp. 1001-1021. ISSN 0954-4070

Mohebbi, M. and Hashemi, M. (2017) Designing a 2-degree of freedom model of an unbalanced engine and reducing its vibrations by active control. International Journal Of Technology, 8 (5). pp. 858-866. ISSN 2086-9614

Mohebbi, M. and Reyhanian, M. and Ghofrani, I. and Aziz, A. A. and Hosseini, V. (2017) Availability analysis on combustion of n-heptane and isooctane blends in a reactivity controlled compression ignition engine. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering . ISSN 0954-4070 (In Press)

Mokhtar, I. and Yahya, M. Y. and Abd. Kader, A. S. and Hassan, S. A. and Santulli, C. (2017) Transverse impact response of filament wound basalt composite tubes. Composites Part B: Engineering, 128 . pp. 134-145. ISSN 1359-8368

Muarat, N. F. and Hussein, M. and Hamzah, R. I. R. and Ahmad, Z. A. and Mohamad, M. and Isa, N. M. and Zain, M. Z. M. (2017) Utilizing deformable origamic geometries in varying room acoustics characteristics. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-4). pp. 145-149. ISSN 2180-1843

Muhammad, F. F. and Yahya, M. Y. and Aziz, F. and Rasheed, M. A. and Sulaiman, K. (2017) Tuning the extinction coefficient, refractive index, dielectric constant and optical conductivity of Gaq3 films for the application of OLED displays technology. Journal of Materials Science: Materials in Electronics, 28 (19). pp. 14777-14786. ISSN 0957-4522

Muhammad, F. F. and Yahya, M. Y. and Hameed, S. S. and Aziz, F. and Sulaiman, K. and Rasheed, M. A. and Ahmad, Z. (2017) Employment of single-diode model to elucidate the variations in photovoltaic parameters under different electrical and thermal conditions. PloS one, 12 (8). e0182925. ISSN 1932-6203

Muhammad, F. F. and Yahya, M. Y. and Sulaiman, K. (2017) Improving the performance of solution-processed organic solar cells by incorporating small molecule acceptors into a ternary bulk heterojunction based on DH6T:Mq3:PCBM (M\xA0=\xA0Ga, Al). Materials Chemistry and Physics, 188 . pp. 86-94. ISSN 0254-0584

Muhammad Azmi, Mohd. Azlan Fahmi (2017) Ergonomics of quay crane workstation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhammad Azmin, Nurasmida (2017) Experimental studies on tribological properties of RBD palm olein using copper pin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muniapan, Kathiravan (2017) Personal rain protection device for pedestrian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Musa, Nur Amalina (2017) Transient aerodynamics effect on v-tail aircraft in lateral stability. PhD thesis, Universiti Teknologi Malaysia.

Mustafa, Khaleel Ibrahim and Hamzah, Esah and Saud, Safaa N. and Bahador, Abdollah and Engku Abu Bakar, Engku Mohammad Nazim (2017) Microwave sintering effects on the microstructure and mechanical properties of ti-51at%ni shape memory alloys. International Journal of Minerals, Metallurgy and Materials, 24 (3). pp. 280-288. ISSN 1674-4799

Mustapa, M. A. and Yaakob, O. B. and Ahmed, Y. M. and Rheem, C. K. and Koh, K. K. and Adnan, F. A. (2017) Wave energy device and breakwater integration: A review. Renewable and Sustainable Energy Reviews, 77 . pp. 43-58. ISSN 1364-0321

Nakisa, M. and Maimun, A. and Ahmed, Y. M. and Behrouzi, F. and Tarmizi, A. (2017) Numerical estimation of shallow water effect on multipurpose amphibious vehicle resistance. Journal of Naval Architecture and Marine Engineering, 14 (1). pp. 1-8. ISSN 1813-8535

Nakisa, Mehdi and Behrouzi, Fatemeh and Maimun, Adi and Samad, Rahimuddin and M.Ahmed, Yasser (2017) Numerical study on propeller performance for a vessel in restricted water. In: 10th International Conference on Marine Technology, MARTEC 2016, 9 - 10 December 2016, Dhaka, Bangladesh.

Nasrudin, Nurul Athirah and Weng, Howe Chan and Mohamad, Mohd. Saberi and Deris, Safaai and Napis, Suhaimi and Kasim, Shahreen (2017) Pathway-based analysis with support vector machine (SVM-LASSO) for gene selection and classification. International Journal on Advanced Science, Engineering and Information Technology, 7 (4-2). pp. 1609-1614. ISSN 2088-5334

Ng, Boon Chiang and Mat Darus, Intan Zaurah and Mohamed Kamar, Haslinda and Norazlan, Mohamed (2017) Multi objective optimization of an evolutionary feedforward neural network for the automotive air conditioning system performance prediction. In: 2014 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2014, 28 September - 1 October 2014, Kota Kinabalu, Sabah.

Ng, J. H. and Leong, S. K. and Lam, S. S. and Ani, F. N. and Chong, C. T. (2017) Microwave-assisted and carbonaceous catalytic pyrolysis of crude glycerol from biodiesel waste for energy production. Energy Conversion and Management, 143 . pp. 399-409. ISSN 0196-8904

Ng, J.-H. and Teh, J. X. and Wong, K. Y. and Wu, K. H. and Chong, C. T. (2017) A techno-economical and automotive emissions impact study of global biodiesel usage in diesel engines. Journal of the Society of Automotive Engineers Malaysia (JSAEM), 1 (2). pp. 124-136. ISSN 2600-8092

Ng, Wing Chun (2017) Simulation study on the effect of fuel-inlet angle on the swirling combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngadiman, N. H. A. and Noordin, M. Y. and Idris, A. and Kurniawan, D. (2017) A review of evolution of electrospun tissue engineering scaffold: From two dimensions to three dimensions. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 231 (7). pp. 597-616. ISSN 0954-4119

Ngadiman, N. H. A. and Yusof, N. M. and Idris, A. and Misran, E. and Kurniawan, D. (2017) Development of highly porous biodegradable γ-Fe2O3/polyvinyl alcohol nanofiber mats using electrospinning process for biomedical application. Materials Science and Engineering C, 70 . pp. 520-534. ISSN 0928-4931

Ngui, W. K. and Leong, M. S. and Shapiai, M. I. and Lim, M. H. (2017) Blade fault diagnosis using artificial neural network. International Journal of Applied Engineering Research, 12 (4). pp. 519-526. ISSN 0973-4562

Nikfarjam, M. and Yaakob, O. B. and Seif, M. S. and Koto, J. (2017) Investigation of wedge water-entry under symmetric impact loads by experimental tests. Latin American Journal of Solids and Structures, 14 (5). pp. 861-873. ISSN 1679-7817

Nogoud, Y. A. and Jonker, A. and Mansor, S. and Abuelnuor, A. A. A. (2017) Real-time modeling of retractable self-launching glider using spreadsheets. Aircraft Engineering and Aerospace Technology, 89 (6). pp. 791-796. ISSN 1748-8842

Nogoud, Yasser Abdullah Mahjoub (2017) Superaugmentation and stability augmentation control system for unmanned aerial vehicle. PhD thesis, Universiti Teknologi Malaysia.

Nordin, Nur Azmah (2017) effect of cerium and barium additions and superheating melt treatment on the morphology and hardness of al-mg2si-cu composite. PhD thesis, Universiti Teknologi Malaysia.

Nordin, Nur Azmah (2017) Effect of cerium and barium additions and superheating melt treatment on the morphology and hardness of al-mg2si-cu composite. PhD thesis, Universiti Teknologi Malaysia.

Nur, R. and Noordin, M. Y. and Izman, S. and Kurniawan, D. (2017) Machining parameters effect in dry turning of AISI 316L stainless steel using coated carbide tools. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231 (4). pp. 676-683. ISSN 0954-4089

Nurul, M. A. and Syahrullail, S. (2017) A new approach to cold extrusion process: Dimples indentation on sliding contact surface and palm oil as an alternative lubricant. Scientia Iranica, 24 (6). pp. 2875-2886. ISSN 1026-3098

Nurul, M. A. and Syahrullail, S. (2017) Surface texturing and alternative lubricant: tribological study of tapered die sliding contact surface in cold extrusion process. Tribology Transactions, 60 (1). pp. 176-186. ISSN 1040-2004

Nusyirwan, I. F. and Mohd. Rohani, J. (2017) Study of air traffic over KLFIR. In: 1st AEROS Conference 2017, 12 December 2017, Putrajaya, Malaysia.

Olanrewaju, S. O. and Magee, A. and Kader, A. S. A. and Tee, K. F. (2017) Simulation of offshore aquaculture system for macro algae (seaweed) oceanic farming. Ships and Offshore Structures, 12 (4). pp. 553-562. ISSN 1744-5302

Olugu, E. U. and Wong, K. Y. and Awaluddin, M. S. and Abdul Rashid, S. H. and Ghazilla, R. A. B. R. (2017) Sustainable supply chain management in Malaysian SMEs: Perspectives from practitioners. Environmental Engineering and Management Journal, 16 (9). pp. 2123-2132. ISSN 1582-9596

Oluwole, Arowolo Matthew (2017) Development of relationship between risk factors and road safety practices among bus drivers using structural model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osman, H. and Nor, F. M. and Hamdan, Y. M. and Tamin, M. N. (2017) Creep ruptures of AISI 347 austenitic stainless steel foils at elevated temperature of 750 °c. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (6). pp. 516-522. ISSN 1464-4207

Othman, Norazila (2017) Prediction of aerodynamic derivatives using computational fluid dynamics (CFD) at transonic speed. Journal of Transport System Engineering, 4 (1). pp. 11-28. ISSN 2289–9790

Othman, M. and Wan Ramli, W. F. F. and Ahmad Zubir, I. and Ain, M. F. and Ahmad, Z. A. (2017) A novel homogeneous stacked yttrium ion garnet resonator antenna for wideband application. Microwave and Optical Technology Letters, 59 (12). pp. 3036-3041. ISSN 0895-2477

Pillay, D. S. and Sidik, N. A. C. (2017) Tribological properties of biodegradable nano-lubricant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 33 (1). pp. 1-13. ISSN 2289-7879

Putri, N. T. and Yusof, S. M. and Hasan, A. and Darma, H. S. (2017) A structural equation model for evaluating the relationship between total quality management and employees’ productivity. International Journal of Quality and Reliability Management, 34 (8). pp. 1138-1151. ISSN 0265-671X

Rabiatul Adawiyah, M. A. and Othman, Saliza Azlin and Fadil, Nor Akmal and Aisha, Siti Rabiatull and Mohamed Ariff, Azmah Hanim (2017) Electroless and immersion plating process towards structures and IMC formation. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2558-2570. ISSN 2319-8613

Rad, Mozafar Shokri and Mohsenizadeh, Saeid and Ahmad, Zaini (2017) Finite element approach and mathematical formulation of viscoelastic auxetic honeycomb structures for impact mitigation. Journal of Engineering Science and Technology, 12 (2). pp. 471-490. ISSN 1823-4690

Rahim, M. R. and Mohd. Jaafar, M. N. (2017) Kesan sudut pusaran terhadap pembentukan emisi menggunakan dwi pemusar udara aliran jejarian. Jurnal Teknologi, 79 (2). pp. 137-146. ISSN 0127-9696

Rahim, M. R. and Yusof, M. and Azman, A. H. and Jaafar, M. N. M. (2017) Prestasi pembakaran minyak jatropha sebagai bahan api cecair biodiesel pada sistem pembakar berbahan api cecair. Jurnal Teknologi, 79 (6). pp. 177-183. ISSN 0127-9696

Rahim, M. R. and Mohd. Jaafar, M. N. (2017) Kesan pembakaran pada keadaan nisbah kesetaraan ɸ=0.8333 menggunakan dwi pemusar aliran jejarian. Jurnal Teknologi, 79 (2). pp. 147-154. ISSN 0127-9696

Rahman, A. H. A. and Mohd, N. A. R. N. and Lazim, T. M. and Mansor, S. (2017) Aerodynamics of harmonically oscillating aerofoil at low Reynolds number. Journal of Aerospace Technology and Management, 9 (1). pp. 83-90. ISSN 1984-9648

Rahman, M. M. and Hasan, M. F. and Saat, A. and Wahid, M. A. (2017) Economics of biogas plants and solar home systems: for household energy applications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 33 (1). pp. 14-26. ISSN 2289-7879

Rahman, M. M. and Mostafiz, S. B. and Wahid, M. A. (2017) Widespread production of bioenergy: land and water availability factors. Biofuels, 8 (5). pp. 623-632. ISSN 1759-7269

Rashid, Zuli'zam (2017) Ergonomic design parameters for Malaysian car driverseating position. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razak, D. M. and Syahrullail, S. and Nuraliza, N. and Azli, Y. and Sapawe, S. (2017) Surface modification of biomaterial embedded with pits using die sinker machine. Scientia Iranica, 24 (4). pp. 1901-1911. ISSN 1026-3098

Razzaq, A. M. and Abang Abdul Majid, D. L. and Ishak, M. R. and Uday, M. B. (2017) Microstructural characterization of fly ash particulate reinforced AA6063 aluminium alloy for aerospace applications. In: IOP Conference Series: Materials Science and Engineering, 12 December 2017, Putrajaya, Malaysia.

Razzaq, A. M. and Majid, D. L. and Ishak, M. R. and Basheer, U. M. (2017) Effect of fly ash addition on the physical and mechanical properties of AA6063 alloy reinforcement. Metals, 7 (11). ISSN 2075-4701

Rezaei, G. and Gholami, H. and Shaharou, A. B. M. and Zameri Mat Saman, M. and Sadeghi, L. and Zakuan, N. (2017) Shared knowledge mediated correlation between cultural excellence and organisational performance. Total Quality Management and Business Excellence, 28 (3-4). pp. 427-458. ISSN 1478-3363

Romagnoli, A. and Vorraro, G. and Rajoo, S. and Copeland, C. and Martinez-Botas, R. (2017) Characterization of a supercharger as boosting & turbo-expansion device in sequential multi-stage systems. Energy Conversion and Management, 136 . pp. 127-141. ISSN 0196-8904

Saad, S. M. and Andrew, A. M. and Shakaff, A. Y. M. and Dzahir, M. A. M. and Hussein, M. and Mohamad, M. and Ahmad, Z. A. (2017) Pollutant recognition based on supervised machine learning for Indoor Air Quality monitoring systems. Applied Sciences (Switzerland), 7 (8). ISSN 2076-3417

Saad, S. M. and Shakaff, A. Y. M. and Hussein, M. and Mohamad, M. and Dzahir, M. A. M. and Ahmad, Z. (2017) Analysis of feature selection with K-nearest neighbour (KNN) to classify indoor air pollutants. Malaysian Journal of Industrial Technology, 2 (2). pp. 1-5. ISSN 2462-2540

Saad, S. M. and Shakaff, A. Y. M. and Hussein, M. and Mohamad, M. and Dzahir, M. A. M. and Ahmad, Z. (2017) Smell index for indoor air quality system based on multilayer perceptron (MLP). Malaysian Journal of Industrial Technology, 2 (1). pp. 20-24. ISSN 2462-2540

Sabrudin, M. A. S. and Said, M. F. M. and Latiff, Z. A. (2017) Effects of asymmetric intake valve lift configuration towards in-cylinder air flow behavior. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2380-2384. ISSN 1819-6608

Safiullahi, Safiullahi (2017) Physical and combustion characteristics of rice bran oil biodiesel in an oil burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saleh, A. and Idris, M. H. (2017) Viability of using argon gas in investment casting of pure aluminium granules by in-situ melting. Advanced Science Letters, 23 (5). pp. 4509-4513. ISSN 1936-6612

Salema, A. A. and Ani, F. N. and Mouris, J. and Hutcheon, R. (2017) Microwave dielectric properties of Malaysian palm oil and agricultural industrial biomass and biochar during pyrolysis process. Fuel Processing Technology, 166 . pp. 164-173. ISSN 0378-3820

Salim, W. S. I. W. and Mahdi, A. A. M. and Ismail, M. I. and Abas, M. A. and Martinez-Botas, R. F. and Rajoo, S. (2017) Benefits of spark-ignition engine fuel-saving technologies under transient part load operations. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3027-3037. ISSN 2289-4659

Salleh, M. A. A. and Abdul Hamid, M. K. and Che Daud, Z. H. and Abu Bakar, A. R. and Abu Bakar, S. A. (2017) Tribological analysis on palm fatty acid distillate as alternative transmission fluid for clutch application. Jurnal Teknologi, 79 (7-4). pp. 23-27. ISSN 0127-9696

Salleh, M. F. M. and Wahid, M. A. and Ghazanfari, S. A. (2017) The effect of vortex generator base length on thermal hydraulic performance across fin-and-tube heat exchanger. Jurnal Teknologi, 79 (7-3). pp. 53-59. ISSN 0127-9696

Salleh, M. F. M. and Wahid, M. A. and Saat, A. and Kamaruzaman, N. and Sies, M. M. and Abidin, U. (2017) Flow visualization of flat and curved trapezoidal winglet vortex generator in fin-and-tube channel in inline arrangement. International Review of Mechanical Engineering, 11 (2). pp. 101-107. ISSN 1970-8734

Salleh, Mohd. Hafidzul (2017) Mode II + III delamination behaviour of flax fabric reinforced polymer composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salleh, S. and Abdullah, M. A. and Abdulhamid, M. F. and Tamin, M. N. (2017) Methodology for reliability assessment of steel wire ropes under fretting fatigue conditions. Journal of Mechanical Engineering and Sciences, 11 (1). pp. 2488-2502. ISSN 2289-4659

Salleh, Z. M. and Osman, K. and Kadir, M. R. A. (2017) Comparative study ofthe computational fluid dynamics and fluid structure interaction analysis in human airways flow. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3151-3155. ISSN 1819-6608

Salleh, Z. M. and Osman, K. and Yamamoto, T. (2017) Investigation on the effect of stenosis in respiratory airflow in human airway by particle image velocimetry. Advanced Science Letters, 23 (5). pp. 4467-4471. ISSN 1936-6612

Samiran, N. A. and Ng, J. H. and Mohd. Jaafar, M. N. and Valera Medina, A. and Chong, C. T. (2017) Swirl stability and emission characteristics of CO-enriched syngas/air flame in a premixed swirl burner. Process Safety and Environmental Protection, 112 . pp. 315-326. ISSN 0957-5820

Samiran, Nor Afzanizam (2017) Combustion performance of various syngas compositions in swirl combustor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sani, A. S. A. and Rahim, E. A. and Talib, N. and Kamdani, K. and Rahim, M. Z. and Samion, S. (2017) Performance evaluation of palm-olein TMP ester containing hexagonal boron nitride and an oil miscible ionic liquid as bio-based metalworking fluids. Journal of Mechanical Engineering, SI 4 (1). pp. 223-234. ISSN 1823-5514

Sapawe, N. and Samion, S. and Ibrahim, M. I. and Daud, M. R. and Yahya, A. and Hanafi, M. F. (2017) Tribological testing of hemispherical titanium pin lubricated by novel palm oil: evaluating anti-wear and anti-friction properties. Chinese Journal of Mechanical Engineering (English Edition), 30 (3). pp. 644-651. ISSN 1000-9345

Sari, Emelia (2017) Sustainable maintenance performance measurement system for automotive industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saud, S. N. and Hamzah, E. and Bakhsheshi Rad, H. R. and Abubakar, T. (2017) Effect of ta additions on the microstructure, damping, and shape memory behaviour of prealloyed Cu-Al-Ni shape memory alloys. Scanning, 2017 . ISSN 0161-0457

Seaw Chian, N. and A. H., Nor Aziati and Mohd. Yusof, Sha'ri (2017) Factors affecting implementation of green manufacturing for Malaysian automobile manufacturers: a literature review from 2010 until 2015. The Social Sciences, 12 (7). pp. 1293-1298. ISSN 1818-5800

Selamat, U. and Osman, K. and Rashid, A. M. and Kusnin, N. H. A. (2017) Evaluation of integrated Malaysian meteorological data atmospheric dispersion software (IMMDADS). Advanced Science Letters, 23 (5). pp. 4399-4404. ISSN 1936-6612

Shafie, N. A. Mohamad and Said, M. F. Muhamad (2017) Cold flow analysis on internal combustion engine with different piston bowl configurations. Journal of Engineering Science and Technology, 12 (4). pp. 1048-1066. ISSN 1823-4690

Shah, A. and Izman, S. and Abdul Kadir, M. R. and Mas Ayu, H. (2017) Influence of substrate temperature on adhesion strength of TiN coating of biomedical Ti–13Zr–13Nb alloy. Arabian Journal for Science and Engineering, 42 (11). pp. 4737-4742. ISSN 1319-8025

Shah, S. M. A. and Khattak, M. A. and Asad, M. and Iqbal, J. and Badshah, S. and Khan, M. S. (2017) Numerical modeling of phase transformation during grinding process. Jurnal Teknologi, 79 (5). pp. 33-41. ISSN 0127-9696

Shaharuddin, N. M. R. and Darus, I. Z. M. and Samin, P. M. and Wahid, M. A. (2017) Fuzzy iterative PID-type control of vortex induced vibration suppression. Journal of Vibroengineering, 19 (7). pp. 5137-5148. ISSN 1392-8716

Shaharuddin, N. M. R. and Mat Darus, I. Z. (2017) Implementation of active control on flexibly mounted pipe exposed to vortex induced vibration using rotating rod. Meccanica . pp. 1-13. ISSN 0025-6455 (In Press)

Shahidin, S. A. M. and Fadil, N. A. and Yusop, M. Z. and Tamin, M. N. and Osman, S. A. (2017) Effect of etching as pre-treatment for electroless copper plating on silicon wafer. Jurnal Teknologi, 79 (7). pp. 61-69. ISSN 0127-9696

Shahri, S. M. G. and Assadian, M. and Idris, M. H. (2017) Hydroxyapatite and fluoridated hydroxyapatite coatings and their effects on commercially pure magnesium corrosion response. Transactions of the Indian Institute of Metals, 70 (6). pp. 1511-1518. ISSN 0972-2815

Sharif, S. and Sadiq, I. O. and Yusof, N. M. and Mohruni, A. S. (2017) A review of minimum quantity lubrication technique with nanofluids application in metal cutting operations. International Journal on Advanced Science, Engineering and Information Technology, 7 (2). pp. 587-593. ISSN 2088-5334

Sharif, S. K. B. and Mailah, M. (2017) Real-time implementation of feed rate active force control of a syringe fluid dispenser. Jurnal Teknologi, 79 (5). pp. 117-123. ISSN 0127-9696

Shariffudin, Solehan Imran (2017) Study of physical workload and heat stress among housing construction workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sidik, N. A. C. and Muhamad, M. N. A. W. and Japar, W. M. A. A. and Rasid, Z. A. (2017) An overview of passive techniques for heat transfer augmentation in microchannel heat sink. International Communications in Heat and Mass Transfer, 88 . pp. 74-83. ISSN 0735-1933

Sidik, N. A. C. and Samion, S. and Ghaderian, J. and Yazid, M. N. A. W. M. (2017) Recent progress on the application of nanofluids in minimum quantity lubrication machining: A review. International Journal of Heat and Mass Transfer, 108 . pp. 79-89. ISSN 0017-9310

Siew, Tien Yeow (2017) Computer simulation on natural ventilation design of a warehouse. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soib, Muhammad Erizuwan (2017) Development of improvement initiative selection framework for business excellence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soleimaninanadegany, A. and Hassan, A. and Galankashi, M. R. (2017) Product allocation of warehousing and cross docking: A genetic algorithm approach. International Journal of Services and Operations Management, 27 (2). ISSN 1744-2370

Suhaimi, Mohd. Azlan and Park, Kyung-Hee and Sharif, Safan and Kim, Dong-Won and Mohruni, Amrifan Saladin (2017) Evaluation of cutting force and surface roughness in high-speed milling of compacted graphite iron. In: 1st Sriwijaya International Conference on Engineering, Science and Technology, SICEST 2016, 9 - 10 November 2016, Bangka Island, Indonesia.

Sukri, Mohamad Firdaus (2017) Simulation and analysis of a direct current operated automotive air-conditioning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Maizan (2017) Parametric studies of capillary flow front velocity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Syabillah (2017) Modelling and control of semi active suspension system incorporating magnetorheological damper for generic vehicle. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suliman, A. H. A. and Mat Darus, I. Z. and Katimon, A. (2017) GIS-based rainfall-runoff neuro model for streamflow prediction. International Review of Civil Engineering, 8 (5). pp. 235-240. ISSN 2036-9913

Sundaram, Sornambikai and Abdul Kadir, Mohammed Rafiq (2017) A new highly conducting carbon black (CL-08) modified electrode functionalized with syringic acid for sensitive and selective L-cysteine electrocatalysis at low potential. Electrochimica Acta, 224 . pp. 475-486. ISSN 0013-4686

Syed Pauzi, Syed Mohd. Ridzuan (2017) Effect of alkali treatment on the water absorption of hybrid pineapple leaf/ glass fibre reinforced epoxy composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tahmasebi, M. and Gohari, M. and Mailah, M. and Abd. Rahman, R. (2017) Vibration suppression of sprayer boom structure using active torque control and iterative learning. Part II: experimental implementation. JVC/Journal of Vibration and Control, 24 (20). pp. 4740-4750. ISSN 1077-5463 (In Press)

Tahmasebi, M. and Mailah, M. and Gohari, M. and Abd. Rahman, R. (2017) Vibration suppression of sprayer boom structure using active torque control and iterative learning. Part I: modelling and control via simulation. JVC/Journal of Vibration and Control, 24 (20). pp. 4689-4699. ISSN 1077-5463 (In Press)

Taib, M. F. M. and Bahn, S. and Yun, M. H. and Taib, M. S. M. (2017) The effects of physical and psychosocial factors and ergonomic conditions on the prevalence of musculoskeletal disorders among dentists in Malaysia. Work, 57 (2). pp. 297-308. ISSN 1051-9815

Tajuddin, N. and Mat, S. and Said, M. and Mansor, S. (2017) Flow characteristic of blunt- edged delta wing at high angle of attack. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 39 (1). pp. 17-25. ISSN 2289-7879

Tan, Foo Chuan (2017) Heat load calculation and analysis for commercial building air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, L. P. and Wong, K. Y. (2017) A neural network approach for predicting manufacturing performance using knowledge management metrics. Cybernetics and Systems, 48 (4). pp. 348-364. ISSN 0196-9722

Tan, Shy Ching (2017) Derivation of safety climate model in East Malaysia chemical processing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Win Hon (2017) Synthesis and characterisation of carbon nanotubes from hydrocarbon-rich flames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Win Hon and Lee, Siew Ling and Chong, Cheng Tung (2017) TEM and XRD analysis of carbon nanotubes synthesised from flame. In: International Conference on Material Science and Engineering, ICMSE 2016, 24 - 26 June 2016, Guangzhou, China.

Tavalaei, J. and Habibuddin, M. H. and Khairuddin, A. and Mohd. Zin, A. A. (2017) Fault location and classification of combined transmission system: Economical and accurate statistic programming framework. Journal of Electrical Engineering and Technology, 12 (6). pp. 2106-2117. ISSN 1975-0102

Valera-Medina, A. and Vigueras-Zuniga, M. O. and Baej, H. and Syred, N. and Chong, C. T. and Bowen, P. J. (2017) Outlet geometrical impacts on blowoff effects when using various syngas mixtures in swirling flows. Applied Energy, 207 . pp. 195-207. ISSN 0306-2619

Vijeyan, V. and Rahman, M. M. and Hasan, M. F. and Saat, A. and Wahid, M. A. (2017) Renewable resource based decentralized power system to a remote village in Malaysia: Optimization and technoeconomic evaluation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 37 (1). pp. 1-17. ISSN 2289-7879

Wang, P. and Yang, J. and Li, X. and Liu, M. and Zhang, X. and Sun, D. and Bao, C. and Gao, G. and Yahya, M. Y. and Xu, S. (2017) Modification of the contact surfaces for improving the puncture resistance of laminar structures. Scientific Reports, 7 (1). ISSN 2045-2322

Wong, A. A. and Abu, A. and Mansor, S. and Rudin, N. F. M. N. and Johar, A. H. and Yatim, N. H. M. (2017) Effect of different automobile cabin geometry to acoustic cavity mode analysis. Advanced Science Letters, 23 (5). pp. 3824-3828. ISSN 1936-6612

Wong, K. J. and Israr, H. A. and Tamin, M. N. (2017) Crack length dependence of mode III delamination using edge crack torsion test. International Journal of Mechanical Engineering and Robotics Research, 6 (3). pp. 219-225. ISSN 2278-0149

Wong, K. J. and Low, K. O. and Israr, H. A. (2017) Impact resistance of short bamboo fibre reinforced polyester concretes. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 231 (8). pp. 683-692. ISSN 1464-4207

Xin, Li and Yahya, Mohd. Yazid and Nia, Amin Bassiri and Zhihua, Wang and Jinglei, Yang and Guoxing, Lu (2017) Dynamic failure of basalt/epoxy laminates under blast-experimental observation. International Journal of Impact Engineering, 102 . pp. 16-26. ISSN 0734-743X

Yaacob, A. and Mokri, K. N. and Puteri Zarina, M. K. and Mun'aim, M. A. and Idrus, M. and Zakaria, Z. A. and Koto, J. (2017) Comparative mechanical properties study of resin infusion versus hand laminating for the construction of 12-ft fishing boat. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1954-1960. ISSN 1819-6608

Yaacob, N. and Asmawi, A. M. and Saat, A. and Fuad, A. F. A. and Ahmad, M. Z. and Radzi, A. A. (2017) Carbonization cbn550 effect on tensile properties of composite for marine structure application. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 1319-1323. ISSN 1819-6608

Yaakub, F. and Wahab, A. and Abdullah, A. and Nik Mohd., N. A. R. and Shamsuddin, S. S. (2017) Aerodynamic prediction of helicopter rotor in forward flight using blade element theory. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2711-2722. ISSN 2289-4659

Yap, Calvin Thai Ming and Wong, King Jye and Israr Ahmad, Haris Ahmad (2017) Mechanical properties of bamboo and bamboo composites: a review. Journal of Advanced Research in Materials Science, 35 (1). pp. 7-26. ISSN 2289-7992

Yazid, M. N. A. W. M. and Sidik, N. A. C and Yahya, W. J. (2017) Heat and mass transfer characteristics of carbon nanotube nanofluids: A review. Renewable and Sustainable Energy Reviews, 80 . pp. 914-941. ISSN 1364-0321

Yong, Jonathan Chung Ee (2017) Agent-based model for sustainable equipment expansion with co2 reduction of a container port. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Younus, M. H. and Ameen, O. F. and Ibrahim, R. K. R. and Redzuan, N. (2017) Fuel detection system using OTDR with multimode fiber. Jurnal Teknologi, 79 (3). pp. 107-112. ISSN 0127-9696

Yousefi, M. and Yousefi, M. and Martins Ferreira, R. P. and Darus, A. N. (2017) A swarm intelligent approach for multi-objective optimization of compact heat exchangers. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 231 (2). pp. 164-171. ISSN 0954-4089

Yusof, Ismail and Abdul Rahim, Abd. Rahman (2017) Aircraft acquisition conceptual framework. Asian Social Science, 13 (4). ISSN 1911-2017

Yusof, N. S. M. and Dewi, D. E. O. and Salih, N. M. and Supriyanto, E. and Syahrom, A. and Faudzi, A. A. M. (2017) Epoxy resin characterization for imaging phantom : X - ray, textural, and mechanical properties. In: 2016 IEEE-EMBS Conference on Biomedical Engineering and Sciences, IECBES 2016, 4 - 8 December 2016, Kuala Lumpur, Malaysia.

Zahari, S. N. and Latif, M. J. A. and Rahim, N. R. A. and Kadir, M. R. A. and Kamarul, T. (2017) The effects of physiological biomechanical loading on intradiscal pressure and annulus Stress in lumbar spine: a finite element analysis. Journal of Healthcare Engineering, 2017 . ISSN 2040-2295

Zaharuddin, M. F. A. and Kim, D. and Rhee, S. (2017) An ANFIS based approach for predicting the weld strength of resistance spot welding in artificial intelligence development. Journal of Mechanical Science and Technology, 31 (11). pp. 5467-5476. ISSN 1738-494X

Zainal, Nurezayana and Mohd. Zain, Azlan and Sharif, Safian and Abdul Hamed, Haza Nuzly (2017) A study of dimensional accuracy on die sinking electrical discharge machining of Ti-6AL-4V. Indian Journal of Science and Technology, 10 (12). ISSN 0974-6846

Zainal Abidin, Norsheila (2017) The total direct cost and knowledge, attitude and practices to musculoskeletal disorder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zainol, I. and Ahmad Fuad, A. F. and Zaifulrizal, M. Z. and Nuraihan, I. and Adam, S. A. M. and Zoolfakar, M. R. (2017) Fuel saving analysis and stability assessments of malaysian offshore fishing vessels fitted with dual fuel diesel and compressed natural gas. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3352-3356. ISSN 1819-6608

Zainul, M. N. M. and Jaafar, M. N. M. and Lazim, T. M. (2017) Effect of varying the double radial swirler configuration on the fluid dynamic and emissions performances in a can combustor. Jurnal Teknologi, 79 (7-3). pp. 33-41. ISSN 0127-9696

Zaki, Nurul Zubaidah (2017) Study of flutter on a composite UAV wing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zaman, H. A. and Sharif, S. and Idris, M. H. and Kurniawan, D. (2017) Effect of high speed end milling of Co-28Cr-6Mo cobalt chromium molybdenum alloy using uncoated and coated carbide tools. Journal of Engineering and Applied Sciences, 12 (4). pp. 945-949. ISSN 1816-949X

Zaman, H. A. and Sharif, S. and Kim, D. W. and Idris, M. H. and Suhaimi, M. A. and Tumurkhuyag, Z. (2017) Machinability of cobalt-based and cobalt chromium molybdenum alloys - a review. Procedia Manufacturing, 11 . pp. 563-570. ISSN 2351-9789

Zaman, Munawar (2017) Control chart patterns recognition using run rules and fuzzy classifiers considering limited data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zuan, A. M. S. and Syahrullail, S. and Arif, M. D. and Kamitani, S. (2017) Tribological performance of palm kernel oil at various load using pin-on-disk tribotester. Journal of Mechanical Engineering (Specia). pp. 91-102. ISSN 1823-5514

Zuan, A. M. S. and Syahrullail, S. and Yahya, W. J. and Shafiq, M. N. and Fawwaz, Y. M. (2017) Tribological properties of potential bio-based lubricants from RBD palm stearin and palm fatty acid distillate. Jurnal Teknologi, 79 (7-3). pp. 21-26. ISSN 0127-9696

Zuan, A. M. S. and Syahrullail, S. and Zaminain, M. D. (2017) Tribological properties of mineral oil mix with RBD palm stearin using four-ball tribotester at various loads. Advanced Science Letters, 23 (5). pp. 4725-4727. ISSN 1936-6612

Zulhanafi, P. and Syahrullail, S. and Faridzuan, M. M. (2017) Tribological performance of palm kernel oil added with nanoparticle copper oxide using fourball tribotester. Jurnal Teknologi, 79 (7-4). pp. 53-59. ISSN 0127-9696

Zulkiflee, Mohamad Amar Shahmin (2017) Physical and combustion properties of torrefied empty fruit bunch after densification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.