Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Civil Engineering" and Year is 2006

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 236.

Abd. Kadir, Aslila (2006) Risiko dan pengurusannya dalam pembinaan : perspektif kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Latif Azmi, Noraziah Azmin (2006) The study of problems faced by property management in managing the high rise condominium in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Majid, Muhd. Zaimi and Azmi, Ade (2006) Knowledge management and project performance in Malaysian construction consulting companies. In: International Conference on Computing and Decision Making in Civil and Builiding Engineeering, 2006.

Abd. Manan, Fazilah (2006) Achieving sustainable food industries: good practices in environmental management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Ahmad Baharuddin and Omar, Wahid (2006) Issues and challenges in the implementation of Industrialised Building Systems in Malaysia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abd. Rahman, Ahmad Baharuddin and Chan, Dennis Paul Leong and Saim, A. Aziz and Osman, Mohd. Hanim (2006) Hybrid beam-to-column connections for precast concrete frames. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abd. Rahman, Norhan and Othman, Mohamad Abd. Rashid and Othman, Mohamad @ Abd. Rashid and Alias, Noraliani and Mohd. Salleh, Siti Salhawati and Othman, Norasman and Mohamad, Ahmad Faisal and Ansari, Kamran (2006) Evaluation of design criteria for inflow & infiltration of medium scale sewerage catchment system. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Abd. Rahman, Zanariah (2006) Evaluation on properties of tender mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelalim, A. M. K. and Abdelaziz, G. E. and Fawzy, Y. A. (2006) Effectiveness and mechanism of corrosion inhibiting admixtures. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5 - 6 September 2006, Kuala Lumpur, Malaysia.

Abdelaziz, G. E. (2006) Effect of application time of water-based curing compound on strength, hardness, sorptivity and porosity of blending concretes. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdu Samad, Norlizawaty (2006) Treatment of cyanide and phenol of corn wet milling industry effluent using sequencing batch reactor (SBR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abdul Ghani, Norhisham (2006) The importance of preliminaries items. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Hamid, Mohd. Faisal (2006) Project monitoring systems (PMS II) - case study on the constraints and problems facing at users level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Latif, Marhana (2006) Penentuan kestabilan cerun disebabkan oleh penyusupan hujan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahiman, Nafisah (2006) Managing construction project risks; case study: contractors in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Redzuan (2006) Significant usage of slab and wall form technique in industrialised building systems (IBS) for low cost highrise apartments construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, A. and Thai, O. B. (2006) Personal digital assistants as a mobile inspection system at construction site. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdullah, K. and Hussin, M. W. and Zakaria, F. and Muhamad, R. and Abdul Hamid, Z. (2006) POFA : a potential partial cement replacement material in aerated concrete. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdullah, Azhar (2006) Development of common work breakdown structure (WBS) for school project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Mohd. Yazid (2006) Urban stormwater management for property development projects in Selangor and Negeri Sembilan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Muhammad Sofian (2006) Determination of optimum concentration of lime slurry for soil stabilisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Rini Asnida (2006) A study on stress-strain behaviour of granite and sandstone using closed-circuit servo-controlled testing machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Redzuan and Abd. Hamid, Hazlan (2006) An investigation on the feasibility of the use of dry floor system for low cost construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Adanan, Hadiatul Aida (2006) Client satisfaction on contractors' work performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Azlan and Alih, Sophia C. and Mirasa, Karim (2006) Bridge evaluation through nondestructive testing in comparison with visual inspection. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Adnan, Azlan and Hendriyawan, Hendriyawan and Marto, Aminaton and Irsyam, Masyhur (2006) Development of synthetic time histories at bedrock for Kuala Lumpur. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Adnan, Azlan and Sunaryati, Jati (2006) Mechanical characteristics of circular elastomeric hollow rubber bearing. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Adnan, Azlan and Suradi, Suhana and Selvanayagam, P. N. and Darus, Zamri (2006) Vulnerability of public buildings subjected to earthquake by finite element modelling. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ahamad Nordin, Noor Ida Amalina (2006) Leachate treatment using constructed wetland with magnetic field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Kamarudin and Kassim, Khairul Anuar and Taha, Mohd. Raihan (2006) Electroosmotic flows and electromigrations during electrokonetic processing of tropical residual soil. Malaysian Journal of Civil Engineering, 18 (2). pp. 74-88. ISSN 1823-7843

Ahmad, Mohd. Redzuan (2006) Comparison between predicted and observed settlement of vertical drain treated road embankment on soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Zainudin (2006) Pembangunan sistem pengkalan data perolehan bahan latihan di Institut Latihan Perindustrian Muar (ILP Muar). Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Ahmad Kamar, Fazleen Hanim (2006) The application of package plant system in upgrading the existing sewage treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Memon, Zubair and Abd. Majid, Muhd Zaimi and Mustaffar, Mushairry (2006) The use of photogrammetry techniques to evaluate the construction project progress. Jurnal Teknologi B (44B). pp. 1-15. ISSN 0127-9696

Ahmed Memon, Zubair and Abd. Majid, Muhd. Zaimi and Mustaffar, Mushairry (2006) Digitalizing Construction Monitoring (DCM): an overview of Malaysian construction industry and proposing prototype software. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Akbar, Nor Azliza (2006) Flood damage assessment model using cost-benefit analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alashwal, Ali Mohammed (2006) Optimizing production line of IBS by using simulation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Aminudin (2006) Exploitation of contract document for construction project planning and controlling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering : Construction Management.

Ali Bashah, Azli Shah (2006) Effect of silica fume to the strength and permeability of high performance ground granulated blastfurnace slag concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Idris (2006) Faktor-faktor kelewatan dalam projek pembinaan bangunan pendidikan MARA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alisibramulisi, Anizahyati (2006) Analysis of corrugated web beam to column extended end plate connection using LUSAS software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anggraini, Vivi (2006) Shear strength improvement of peat soil due to consolidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aripin, Syahida (2006) Database management inventory system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aris, A. and Sharratt, P. N. (2006) Influence of initial dissolved oxygen concentration on fenton's reagent degradation. Environmental Technology, 27 (10). pp. 1153-1161. ISSN 0959-3330

Aris, Rozita (2006) Maintenance factors in building design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arreshvhina, N. and Fadhadli, Z. and Mohd Warid, H. and Zuhairy, A. H. and Roswadi, Roswadi (2006) Microstructural behavior of aerated concrete containing high volume of GGBFS. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Awang Morshaidi, Awang Mortaza (2006) Project communication at construction stage. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Ayop, Sallehuddin Syah and Mohamad Zin, Rosli and Ismail, Mohammad (2006) Condition assessment of marine structures using functional condition index approach. Malaysian Journal of Civil Engineering, 18 (2). pp. 129-138. ISSN 1823-7843

Aziz Memon, Naeem (2006) Comparison between superpave gyratory and Marshall laboratory compaction methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakhary, Norhisham (2006) Vibration-based damage detection of slab structure using artificial neural network. Jurnal Teknologi B (44B). pp. 17-30. ISSN 0127-9696

Bakri, Ahmadon and Mohd. Zin, Rosli and Misnan, Mohd. Saidin and Mohammed, Abdul Hakim (2006) Occupational Safety and Health (OSH) management systems: towards development of safety and health culture. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Benson, Yannie (2006) Effect of raw water quality on coagulant dosage and optimum pH. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Berahim @ Ibrahim, Siti Khairizan (2006) Development of database management system (DBMS) based on elemental cost analysis (ECA) methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Boussabaine, A. Halim and Yahya, Khairulzan (2006) Eco-costing of construction waste. Management of Environmental Quality: An International Journal, 17 (1). pp. 6-19. ISSN 1477-7835

Chan, Chee Han (2006) Comparison between BS 5950: part 1: 2000 & Eurocode 3 for the design of multi-storey braced steel frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Chee Hing (2006) Investigation of watershed cumulative effects by up scaling of model parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Chan, Dennis Paul Leong (2006) Behaviour of pinned beam-to-column connections for precast concrete frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Munaaim, Muhammad Ehsan (2006) Payment woes among Malaysian contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chee, Khoon Ng and Soon, Wah Loo and Yan, Phing Bong (2006) Reinforced concrete beams at ultimate flexural limit state: comparison of BS 8110 and Eurocode 2. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Chew, Ai Ling (2006) Nutrient removal from leachate using horizontal subsurface constructed wetlands. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chew, We-sen (2006) Corrosion management of steel reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chin, Kai San (2006) Application of fiber bragg grating sensors in monitoring civil engineering structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Chuan Yee (2006) The implementation of quality management system (ISO 9001) in analysing the workmanships performance in selected projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Elizabeth Eu Mee (2006) The effects of nominal maximum aggregate size on the properties of hot mix asphalt using gyratory compactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chuang, Kuang Hong (2006) Development of a decision support system for drinking water treatment process design (WATER-DSS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eh Rak, Aweng (2006) Water quality and shellfish related gastrointestinal disease cases in Kota Bharu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Erica Dina, Erica Dina (2006) Pengesanan proses pengaratan dan perubahan PH dalam konkrit bertetulang menggunakan serabut optik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fong, Shiau Ween (2006) Secondary bending moment of trapezoid web beam under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foong, Kok Li (2006) Scheduling on transportation for industrialized building systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gofar, Nurly and Lee, Min Lee and Asof, Marwan (2006) Transient seepage and slope stability analysis for rainfall induced landslide: a case study. Malaysian Journal of Civil Engineering, 18 (1). pp. 1-13. ISSN 1823-7843

Gofar, Nurly and Lee, Min Lee and Kassim, Azman (2006) Effect of surface boundary condition on rainfall infiltration. Jurnal Teknologi B (44B). pp. 63-70. ISSN 0127-9696

Gofar, Nurly and Kassim, Khairul Anuar (2006) Determination of coefficient of rate of horizontal consolidation of peat soil. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Goh, Kai Chen (2006) A groupware system in monitoring construction project planning approval. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gu, Haosheng and Itoh, Yoshito (2006) Ageing effects on high damping bridge rubber bearing. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Hainin, Mohd. Rosli and Brown, E. Ray (2006) Determination of maximum in place air void for impermeable hot mix asphaly pavement. Malaysian Journal of Civil Engineering, 18 (1). pp. 46-58. ISSN 1823-7843

Hamid, Roszilah and Mohamed, Ramizi and Mohd. Nayan, Khairul Anuar and Osman, Siti Aminah and Mohd. Yusof, Kamarudin (2006) Automatic mapping of concrete strength in structural element. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Hamood Al-Harthy, Amur Salim (2006) The consultancy fee for structural design changes of reinforced concrete buildings in Oman. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Muzamir (2006) The correlations of engineering characteristics of Johor coastal clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Ahmad Riza (2006) Maintenance management and servises (case study: PERKESO building's in penisular of Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Md. Nasir (2006) Comparative stiffness analysis between conventional and IBS construction method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hossain, M. Z. and Sakai, T. (2006) Flexural behavior of carbon fiber cement composites. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5 – 6 September 2006, Kuala Lumpur, Malaysia. (Submitted)

Hossain, M. Z. and Sakai, T. (2006) Flexural behavior of carbon fiber cement composites. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ibrahim, Fadzilah (2006) Faktor-faktor kritikal bagi pemulihan projek perumahan terbengkalai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Nor Hayati (2006) Variation orders in Universiti Teknologi Malaysia (UTM) construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Ramzi (2006) The performance of Felda Plantations Sdn. Bhd. contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Idrissou, Moumouni Moussa (2006) Reliability in interpreting non-destructive testing (NDT) results of concrete structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Imran, Iswandi and Mujiman, Mujiman (2006) Shear strengthening of R/C beams using AFRP sheet with anchored ends. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ismail, Adnan (2006) Pembentukan corak resipan disebabkan oleh penyusupan hujan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering : Department of Geotechnics.

Ismail, Azizee (2006) Masalah yang dihadapi dalam penyediaan perumahan Polis Diraja Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Ilyani (2006) Assessment of safety level in performing building maintenance work in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Muhamad Aqmarr Norhakim (2006) Modelling of tidal effect on suspended sediment dispersion at Sungai Batu Pahat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Sarina (2006) Finite element modeling and analysis of sandwich dry floor slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ismail, Mohamed A. and Soleymani, Hamid and Ohtsu, Masayasu (2006) Early detection of corrosion activity in reinforced concrete slab by AE technique. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ismail, Tarmizi and Demun, Amat Sairin and Fadzil @ Zulkifly, Abu Bakar and Hashim, Noor Baharim (2006) Hydraulic investigation of channel under tidal influence. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Jatnika, Asep Wawan and Sinaga, Anggiat and Munaf, Dicky R. (2006) The construction of science and technology culture on the development of Suramadu bridge. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Jhatial, Irfan Khan (2006) Evaluation of properties of cold in place recycling material : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Julkarnain, Abdul Aziz (2006) A case study on concrete problems in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarudzaman, Ain Nihla (2006) Leachate treatment using subsurface flow and free water surface constructed wetland systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kang, Lap Hoong (2006) A study on chemical precipitation and electrochemical precipitation as a pre-treatment on electroplating wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kasan, Nor Azman (2006) Kualiti air sungai berdasarkan analisis kimia dan kepelbagaian alga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kassim, Azman and N., Gofar and Lee, M. L. (2006) A Study of infiltration on unsaturated layered soil column. In: SEPKA 2006- National Seminar on Civil Engineering Research- Engineering and Scientific Research Towards a Better and Sustainable Future Development, 2006, UTM Skudai, Johor.

Kassim, Khairul Anuar and Mohamad, Edy Tonnizam and Mohd. Amin, Mohd. For and Kassim, Azman (2006) Engineering properties of weathered granities for excavation purpose. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Khoo, Hui Kiang (2006) Development of creep and shrinkage prediction model for Malaysian normal strength concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koo, Chai Hoon (2006) A study of the plastic life cycle assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kung, Teck Li (2006) The application of MI pro in the management of air quality and noise pollution at construction sites. Masters thesis, Univeriti Teknologi Malaysia, Faculty of Civil Engineering.

Lam, Chee Siang (2006) Criteria of acceptance for constant rate of strain consolidation test for cohesive soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lau, Hui Seng (2006) The selection of construction project manager by using analytical hierarchy process (AHP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Chee Siang (2006) Biodegradation of oil and grease in upflow anaerobic sludge blanket reactor for palm oil mill effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Kuet Fah (2006) Integrated modelling for coastal alluvium aquifer at Kg. Tekek, Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Chai Heng (2006) System performance of a composite stepped-slope floating breakwater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, H. S. and Wee, T. H. and Mansur, M. A. and Kong, K. H. (2006) Flexural behavior of reinforced lightweight aggregate concrete beams. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Lim, Pui Chung (2006) Implementation strategy for industrialised building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, S. K. and Zakaria, F. and Hussin, M. W. and Muhamad, R. (2006) Effect of GGBFS as filler in polyester grout on strength development and flowability. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Lim, S. K. and Zakaria, F. and Hussin, M. W. and Muhamad, R. (2006) Effect of slag content to cement grout on the compressive strength development in tropical weather environment. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ling, Tung Chai and Md. Nor, Hasanan (2006) Plant trial production process and monitoring of crumb rubber concrete paver. In: National Seminar on Civil Engineering Research (SEPKA 2006), 19th - 20th December 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Ling, Tung Chai and Hainin, Mohd. Rosli and Ming, Fai Chow (2006) Highway accelerated loading instrument (HALI) for concrete block pavement. In: National Seminar on Civil Engineering Research (SEPKA 2006), 19th - 20th December 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Ling, Tung Chai and Mudiyono, Rachmat (2006) The effect of cement and water cement ratio on concrete paving block. In: Regional Postgraduate Conference on Engineering and Science (RPCES 2006), 26th - 27th July 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Mahazir, Mashanim (2006) Pemilihan sistem perparitan sementara untuk diaplikasi di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Majid, Ibnu Abbas (2006) Causes and effect of delays in Aceh construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mak, Wai Kin (2006) California bearing ratio correlation with soil index properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansur, M. A. and Tan, King Hwee and Weng, W. (2006) Analysis of concrete beams with circular web openings using strut and tie models. Malaysian Journal of Civil Engineering, 18 (2). pp. 89-98. ISSN 1823-7843

Mansur, M. A. (2006) Design of reinforced concrete beams with web openings. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mansur, Shaiful Amri and Mohamad Zin, Rosli and Sea, E. N. (2006) Impact of unplanned schedule compression on project cost. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Manzur, Tanvir and Ahmed Noor, Munaz (2006) Displacement based fragility curves for R.C.C. frame structures in context of Dhaka, Bangladesh. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Marjuki, Mofti (2006) Computerised building cost estimating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marsono, Abdul Kadir and Md. Tap, Masine and Ng, Soon Ching and Makhtar, Ahmad Mahir (2006) Simulation of Industrialised Building System components production. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Marsono, Abdul Kadir and Lee, Siong Wee (2006) Nonlinear finite element analysis of reinforced concrete tube in tube of tall buildings. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Md. Din, M. F. and Ujang, Zaini and Van Loosdrecht, M. C. M. and Ahmad, A. and Sairan, M. F. (2006) Optimization of nitrogen and phosphorus limitation for better biodegradable plastic production and organic removal using single fed-batch mixed cultures and renewable resources. Water Science and Technology, 53 (6). pp. 15-20. ISSN 0273-1223

Md. Din, Mohd. Fadhli and Ujang, Zaini and Loosdrecht, Mark Van and Mohd. Yunus, Salmiati and Ahmad, Mohd. Azlan (2006) Polyhydroxyalkanoates (PHAs) production from aerobicmixed cultures. Malaysian Journal of Civil Engineering, 18 (2). pp. 109-128. ISSN 1823-7843

Md. Hassan, Ruhaidah and Pung, Astley and Salim, Razma and Salledh, Zulkhairin and Ide, Hisao (2006) Application of hipolka KM as a bio-remediation in Bandara Seri Alam oxidation pond. The Ingenieur, 28 . pp. 58-61. ISSN 0128-4347

Md. Noor, Norhazilan and Yahaya, Nordin (2006) Statistical analysis of seawater ballast tank corrosion data. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Md. Nor, Hasanan and Ismail, Che Ros (2006) The effect of thickness and laying pattern of paver on concrete block pavement. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Sa'at, Siti Kamariah (2006) Subsurface flow and free water surface flow constructed wetland with magnetic field for leachate treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Sukimin, Syahrulnizam @ Helmi (2006) Numerical modelling study for application of hydraulic structures for flood control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Tahir, Mahmood and Mohammad, Shahrin and Yahaya, Nordin and Saad, Sarifuddin and Abd. Rahman, Ahmad Baharuddin (2006) Economic aspects of the use of partial and full strength joints on multi-storey unbraced steel frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Tahir, Mahmood and Tan, Cher Siang and Shek, Poi Ngian (2006) Typical tests on cold-formed steel structures. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Memon, Noor Ahmed and Radin Sumadi, Salihuddin and Ramli, Mahyuddin (2006) Strength and behaviour of lightweight ferrocement-aerated concrete sandwich blocks. Malaysian Journal of Civil Engineering, 18 (2). pp. 99-108. ISSN 1823-7843

Mohamad, Mohamad Ibrahim and Madon, Zulkifli (2006) Understanding contract documentation. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamad @ Ahmad, Khairil Azizi (2006) Faktor-faktor kejayaan perlaksanaan sistem kualiti ISO9000 di dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Yatim, Jamaludin and Tapsir, Siti Hamisah and Mohamed, Zainai (2006) Effects of tropical weather on the compression properties of pultruded gfrp composites. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamad Zin, Rosli and Mansur, S. A. and Bakri, A. and Tan, Caren Cai Loon (2006) Predicting the performance of traditional general contract projects: A neural network based approach. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamed Safian, Mohd. Aznan Shukri (2006) Integrity assessment of corroded pipeline using in-line inspection data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Akhir, Norliza (2006) The aggregate degradation characteristics of stone mastic asphalt (SMA) mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ariffin, Mohd. Azreen (2006) Sistem pengurusan penyenggaraan bangunan bagi struktur konkrit bertetulang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nasira, Siti Rashidah and Abd. Majid, Muhd. Zaimi (2006) Project cost performance forecasting system. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Nazir, Noor Zarina (2006) Late payment problems among contractors in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sam, Abdul Rahman and Ishak, M. Y. and Abu Hassan, S. (2006) Advanced composites in Malaysian construction industry. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Tajuddin, Ramlah (2006) Development of hollow fiber ultrafiltration membrane reactor for palm oil mill effluent tertiary treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohd. Yassin, Airil Yasreen and Nethercot, D. A. (2006) Representation of the cross-sectional stress distribution using fourier's series. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Yusof, Mohd. Badruddin and Othman, Fadil and Mohd. Din, Fadhil and Azman, Shamila (2006) Air pollution levels in Pasir Gudang commercial, residential, and industrial areas. In: SEPKA 2006- National Seminar on Civil Engineering Research- Engineering and Scientific Research Towards a Better and Sustainable Future Development, 2006, UTM Skudai, Johor.

Mohd. Yusof, Mohd. Badruddin and Salim, Mohd. Razman and Othman, Fadil (2006) A note on the influence of household behavior on the generation of municipal solid waste in Johor Bahru Tengah. Malaysian Journal of Civil Engineering, 18 (1). pp. 70-73. ISSN 1823-7843

Mohd. Yusof, Zulkifli and Sivadass, T. (2006) Construction management of power transmission lines - logistics and challenges. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Yusoff, Che Som (2006) Finite element analysis on flush end plate connection using LUSAS software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mok, Yew Cheong (2006) Maintenance management for batching plant. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Mokhtar, Mohd. Zaki (2006) Kerosakan dan kemerosotan struktur konkrit di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mokhtar, Nadiah (2006) Treatment of acidic raw water using limestone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Motsa, Caleb Dumisa (2006) Managing construction disputes. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Motsa, Caleb Dumisa (2006) Managing contruction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mudiyono, Rachmat and Md. Nor, Hasanan and Ling, Tung Chai (2006) The effect of joint width between blocks in concrete block pavement. In: Regional Postgraduate Conference on Engineering and Science (RPCES 2006), 26th - 27th July 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Mudiyono, Rachmat (2006) Performance of concrete block pavement on sloped road section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Muhamad Nor, Nur Syahriza (2006) Permeability in Malaysian hot mix asphalt mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Murugun @ Arokiasamy, Michael Angelo (2006) A comparison between static load test and high strain dynamic test on bored piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustaffar, Mushairry and Katimon, Ayob and Hanapi, Muhammad Nassir and Sa'ari, Radzuan (2006) Hydrological and hydraulic study of water management system study for PT Bhumireksa Nusasejati, Sumatera, Indonesia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Narayanan Nair, Purushothaman Nair (2006) Alternative design of foundations subjected to uplift for transmission line tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nex Betin, Timothy (2006) Assessing cumulative watershed effects by zig-zag pebble count method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Boon Chong (2006) Numerical simulation of supercritical flow in open channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Soon Ching (2006) Simulation of industrialised building system components production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Weng Seng and Md. Yusof, Aminah (2006) The success factors of design and build procrement method: a literature visit. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ng, Zee Sum (2006) Performance of stainless steel purlin in bending. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nguee, Ching Seng (2006) Case studies on forensic structural engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noruzman, Ainul Haezah (2006) Evaluation of waste water as mixing water in concrete lower strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Omar, Wahid and Awang, Abdullah Zawawi (2006) A fundamental study of improving ductility of reinforced high-strength concrete (HSC) members. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ong, Boon Thai (2006) Personal digital assistants as a mobile inspection system at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Chee Huat (2006) Performance of concrete containging metakaolin as cement replacement material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering ; Structure.

Ong, Heng Yau (2006) Behaviour of filled joint under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ooi, Boon Siew (2006) Treatment of palm oil mill secondary effluent (POMSE) using fenton oxidation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Alwee (2006) Kelakuan pemandu ketika masa amber dalam kawasan taman perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Naim (2006) Perlaksanaan ISO 9000: kajian ke atas firma kontraktor di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pitt, M. and Goyal, S. and Sapri, M. (2006) Innovation in facilities maintenance management. Building Services Engineering Research and Technology, 27 (2). pp. 153-164. ISSN 0143-6244

R. Alrowaimi, Mohamed Muftah (2006) The compressibility of fill subjected to applied stress and inundation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering ; Civil-Geotechnic.

R. H. Harisan, Alison Shreenawathi (2006) Repair index method to evaluate the condition of reinforced concrete structures exposed to reinforcement corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

R. Periasamy, Jayaselvi (2006) Development of civil and structural consultant's performance evaluation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Radin Sumadi, Salihuddin and Chan, Poh Chin and Jasmin, Lenny Sheryme (2006) Blended cement for waterproofing applications. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ramli, Mohd. Zamri (2006) Response of existing rubber bearing and designed base isolator for malaysian highway bridges. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ramli, Muhd. Harris (2006) A comparison of pile performance base on static formulas and dynamic load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasit, Nazaitulshila (2006) Landfill leachate treatment using subsurface flow constructed wetlands enhanced with magnetic field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rhasbudin Shah, Shahreena Melati (2006) Evaluation on aggregate effective specific gravity as related to Marshall volumetric properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rilling, Dirk and Saik, Han Siang and Soh, Hui Siang (2006) Thermal behaviour of residential buildings in South-East Asia through dynamic simulation. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Rosli, Siti Hafsah (2006) Penilaian dan pemilihan pengurus projek. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Rusli, Norharnila (2006) Salah urus risiko dalam projek pembangunan projek perumahan: kajian ke atas projek perumahan terbengkalai di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sagun, Aysu and J. Anumba, Chimay and Bouchlaghem, Dino (2006) Coping with extreme events in the built environment: ICT for disaster mitigation and collaboration. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Sahdan, Ahmad Yusof (2006) Penggunaan penyepadanan imej berdasarkan kawasan dalam fotogrametri jarak dekat bagi pengukuran permukaan struktur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saleh, Abd. Latif and Abu Bakar, Suhaimi and Mohamed, Zainai and Khin, Maung Zaw (2006) Ultimate strength prediction of DRM timber beams by plastic approach: Experimental results and discussions. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Salleh @ Mohamed Salleh, Jazlan (2006) Construction of precast segmental box girder bridge using overhead gantry - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samion, Mohd. Kamarul Huda (2006) Evaluation of design criteria for inflow and infiltration in sewerage system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sarpin, Norliana (2006) Risk assessment process of hazards in construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shafii, Faridah and Arman Ali, Zainab and Othman, Mohamed Zahry (2006) Achieving sustainable construction in the developing countries Of Southeast Asia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Shafiq, Nasir and Nuruddin, Muhd. Fadhil and Kamaruddin, Ibrahim (2006) Effectiveness of used engine oil on improvement of properties of fresh and hardened concrete. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Shahin, Mohamed M. (2006) Effect of central pile in increasing the bearing capacity of bored pile groups. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Shahin, Mohamed M. (2006) Shaft resistance of model pile in dry silt. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5 – 6 September 2006, Kuala Lumpur, Malaysia.

Shamsuddin, Supiah and Hashim, Noor Baharim and Ab. Rahman, Azmi (2006) Putrajaya river system ranking using fuzzy composite programming. Malaysian Journal of Civil Engineering, 18 (1). pp. 29-37. ISSN 1823-7843

Shukla, Mukesh and Choubey, U. B. (2006) Behaviour of steel fibre reinforced concrete under cyclic compressive loading. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Siddique, Mohammad Al Amin and Rouf, Md. Abdur (2006) Effect of material properties on ductility factor of singly rc beam sections. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Sinang, Som Cit (2006) The effectiveness of different grass types for pollutants removal in level spreader system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subramaniam, Suthagaran (2006) Evaluation of the compactive effort on the stripping characteristic of hot mix asphalt (HMA) mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Supar, Mohd. Farizal (2006) Self evaluation system for construction project manager's performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Tahir, M. M. and Shek, P. N. and Tan, C. S. and Saggaff, A. (2006) Application of wind moment method on the design of multi-storey unbraced steel frames with partial and full strength connections. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Tan, Caren Cai Loon (2006) Predicting the performance of design-bid-build projects: a neural-network based approach. Masters thesis, Universiti Teknologi Malaysia.

Tay, Allan Eng Mian (2006) Industrialised building system formation scheduling for public buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Te, Chei Yean (2006) Load carrying capacity of dry floor panel system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teo, D. C. L. and Mannan, M. A. and Kurian, V. J. (2006) Structural behaviour of singly reinforced OPS beams. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Toh, Tien Choon (2006) Developing a construction industry web-based learning system in construction management education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Toh, Yik Fung (2006) Modeling of shear bond in composite slab using interface element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Toriman, Mohd. Ikhwan and Yusop, Zulkipli and Mokhtar, Mazlin and Juahir, Hafizan (2006) Application GIS for detecting changes of Sungai Langat channel. Malaysian Journal of Civil Engineering, 18 (1). pp. 59-70. ISSN 1823-7843

Tung, Chai Ling and Md. Nor, Hasanan (2006) Granulated waste tyres in concrete paving block. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Wan Mansor, Wan Salida (2006) Effect of magnetic fields on heavy metal and nutrient removal in leachate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wee, Aida Sze Chia (2006) Software development for water pricing model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wiyono, Sugeng (2006) Application of road deterioration simulation model for prediciting initiation and progression of cracks on road pavement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Wong, Charng Chen (2006) Prediction of ultimate load bearing capacity of driven piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Woon, Kai Siong (2006) Integrating construactability into the design process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap, Ean Mei (2006) Extended overtime and the effect to labour productivity in construction : workers perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yekong, Wai (2006) Impact load theory - a new theory in pile driving and its compatibility study compared to hiley and case methods. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Yip, Desmond Teck Wing (2006) The application of mapinfo in managing material and waste at construction sites. Masters thesis, Univeriti Teknologi Malaysia, Faculty of Civil Engineering.

Yong, Hong Lee (2006) Home buyers requirements for housing development within districts in Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Youceff, Berreksi (2006) Implementation of ISO 9001:2000 quality management system for construction biddings procedures in construction management practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yow, Soon Keong (2006) The current practice and problems of contractual arrangement in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yulindasari, Yulindasari (2006) Compressibilty characteristics of fibrous peat soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Suraya (2006) Pembangunan sistem pangkalan data bagi proses penilaian tender di dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusop, Zulkifli and Douglas, Ian and Nik, Abdul Rahim (2006) Export of dissolved and undissolved nutrients from forested catchments in Peninsular Malaysia. Forest Ecology and Management, 224 (1-2). pp. 26-44. ISSN 0378-1127

Zackaria, Nor Hamiza and Fell, Robin (2006) Design and construction of an embankment dam in New South Wales, Australia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Zainal Abideen, Muzaaffar and Ahmad, Mohd. Azlan and Razak, Rohani and Md. Din, Mohd. Fadhil and Ujang, Zaini and Loosdrecht, M.C.M. Van and Ismail, Mohd. Nasir and Husin, Aishah (2006) Polyhydroxyalkanoates (PHA) production from palm oil mill effluent (POME) using mixed culture in sequencing batch reactor (SBR). Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Zainal Abidin, Mohd. Hazreek (2006) Pendekatan penilaian untuk analisa cerun tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainon, Othman and Jaadil, Jamilah and Radin Supathan, Radin Jayakasuma and Basiron, Sakdiah (2006) The application of the geotechnical methods and satellite tracking data for landslide studies. Project Report. Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Zainuddin, Sabri (2006) The sufficiency of current training curricullum for different industries and adequacy of the minimum academic requirement for safety and health officer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zawawi, Umi Adzmira (2006) Sensor technologies in monitoring of civil engineering structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zularisam, A. W. and Ismail, A. F. and Salim, Razman (2006) Behaviours of natural organic matter in membrane filtration for surface water treatment : a review. Desalination, 194 (1-3). pp. 211-231.

This list was generated on Fri Mar 29 05:48:09 2024 +08.