Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Civil Engineering" and Year is 2005

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 233.

Article

Abdul Rahim, Ruzairi and Pang, Jon Fea and Chan, Kok San and Leong, Lai Chean (2005) Real-time image reconstruction for various flow regimes using an optical tomography sensor in a gravity flow conveyor. Advanced Powder Technology, 16 (4). pp. 399-411. ISSN 0921-8831

Abdul-Talib, Suhaimi and Ujang, Zaini and Vollertsen, Jes and Hvitved-Jacobsen, Thorkild (2005) Model concept for nitrate and nitrite utilization during anoxic transformation in the bulk water phase of municipal wastewater under sewer conditions. Water Science and Technology, 52 . pp. 181-189. ISSN 02731223

Abu Bakar, Suhaimi and Saleh, Abd Latif (2005) Verification of weibull's theory of brittle fracture to meranti's timber loaded in tension parallel to the grain. Jurnal Teknologi B (43B). pp. 27-34. ISSN 0127-9696

Adnan, Azlan and Hendriyawan, Hendriyawan and Marto, Aminaton and Irsyam, Masyhur (2005) Seismic Hazard Assessment For Peninsular Malaysia Using Gumbel Distribution Method. Jurnal Teknologi B (42B). pp. 57-73. ISSN 0127-9696

Ahrnad, Kamarudin and Kassimi, Khairul Anuar and Taha, Mohd. Raihan (2005) Influence of electrokinetic processing of a tropical soil on the PHs of the electrolytes. Jurnal Kejuruteraan Awam, 17 (1). pp. 39-48. ISSN 0128-0147

Aris, Azmi and Sharratt, Paul N. (2005) Decolourisation of reactive dyestuff using Fenton's reagent. Jurnal Kejuruteraan Awam, 17 (2). pp. 1-17. ISSN 0128-0147

Brown, E. R. and Hainin, M. R. and Cooley, L. A. (2005) Determining minimum lift thickness for hot mix asphalt (HMA) mixtures. Journal of the Association of Asphalt Paving Technologists, 74 . 23 -66. ISSN 0270-2932

Gerusu, Geoffery James and Yusop, Zulkifli (2005) Bed load transport from a regenerated forest catchment in Sarawak. Jurnal Kejuruteraan Awam, 17 (2). pp. 69-72. ISSN 0128-0147

Ismail, Mohammad and Erica Dina, Erica Dina and Abdul Rahman, Rosly and Ikhsan, Sabirin (2005) Observation of corrosion process of reinforcing steel. Jurnal Kejuruteraan Awam, 17 (1). pp. 13-22. ISSN 0128-0147

Jeevaragagam, Ponselvi (2005) Application of fuzzy logic in the assessment of river flow characteristics at the pier scour. Jurnal Teknologi . pp. 41-48.

Jitno, Hendra and Gofar, Nurly (2005) Stability and deformation analysis of failed embankments founded on soft clays. Jurnal Kejuruteraan Awam, 17 (1). pp. 1-12. ISSN 0128-0147

K.Mandal, Nirmal and Leong, M.Salman and Abd.Rahman, Roslan (2005) Experimental investigation of vibration power flow in thin technical orthotropic plates by the method of vibration intensity. Journal of Sound and Vibration, 285 . pp. 669-695. ISSN 0022-460X

Kassim, Khairul Anuar and Hamir, R. B. and Kok, K. C. (2005) Modification and stabilization of Malaysian cohesive soils with lime. Geotechnical Engineering, 36 (2). 123 -132. ISSN 0046-5828

Khin, Maung Zaw and Mohamed, Zainai and Saleh, Abd. Latif and Abu Bakar, Suhaimi (2005) A modified stress model to predict the ultimate bending strength of solid timber beams using plastic approach. Jurnal Kejuruteraan Awam, 17 (2). pp. 30-45. ISSN 0128-0147

Md. Din, Mohd. Fadhil and Aris, Azmi and Salim, Mohd. Razman and Abu Bakar, Wan Azlee (2005) Heterogeneous photodegradation of orange G under the influence of added oxidising agents using TiO2 thin film. Jurnal Kejuruteraan Awam, 17 (2). pp. 60-68. ISSN 0128-0147

Md. Tahir, Mahmood and Tan, Cher Siang and Thong, Chin Mun (2005) Application of partial strength connection in the design of multi-storey braced steel frame using trapezoidal web profiled section. Jurnal Kejuruteraan Awam, 17 (1). pp. 23-38. ISSN 0128-0147

Md. Tahir, Mahmood and Shek, Poi Ngian (2005) Performance of cruciform column using universal beam sections under axial compression load. Jurnal Teknologi B, 43 (B). pp. 51-66. ISSN 0127-9696

Md. Tahir, Mahmood and Thong, Chin Mun and Tan, Cher Siang (2005) Performance of locally produced cold-formed steel sections for roof truss system. Jurnal Teknologi B (42B). pp. 11-28. ISSN 0127-9696

Mohamad, Edy Tonnizam and Kassim, Khairul Anuar and Komoo, Ibrahim (2005) An overview of existing rock excavatability assessment techniques. Jurnal Kejuruteraan Awam, 17 (2). pp. 46-59. ISSN 0128-0147

Mohd. Amin, Mohd. For and Chua, Jerry Kuo Sheng and Ismail, Fauzilah and Mohamad, Edy Tonnizam (2005) Classification and rippability of duricrusts. Jurnal Kejuruteraan Awam, 17 (2). pp. 18-29. ISSN 0128-0147

Mohd.Sam, Abdul Rahman and Swamy, R. Narayan (2005) Flexural behaviour of concrete beams reinforced with glass fibre reinforced polymer bars. Jurnal Kejuruteraan Awam, 17 (1). pp. 49-57. ISSN 0128-0147

Naeeni, S. T. O. and Narayanan, R. (2005) Influence of plane bed on the force exerted on a cylinder oscillating in still water. Ocean Engineering, 32 . pp. 2217-2230. ISSN 00298018

Ng Meng, Wai and Alejandro, Camerlengo and Abdul Wahab, Ahmad Khairi (2005) A Study Of Global Warming In Malaysia. Jurnal Teknologi F (42F). pp. 1-10. ISSN 0127-9696

Tapsir, Siti Hamisah and Yatim, J. M. and Usman, F. (2005) Towards better housing management : service life planning in achieving sustainability for affordable housing. Not specified . pp. 1-7. (Unpublished)

Tapsir, Siti Hamisah and Mohd. Noor, Norliza (2005) Women engineers in Malaysia. Jurutera . pp. 14-18. ISSN 0126-9909

Ujang, Zaini and Ng, S. S. and Nagaoka, Hiroshi (2005) Package plant of extended aeration membrane bioreactors: A study on aeration intensity and biofouling control. Water Science and Technology, 51 . pp. 335-342. ISSN 02731223

Vigny, Christophe and Simons, William J. F. and Abu , S. Haji and Bamphenyu, Ronnachai and Satirapod, Chalermchon and Choosakul, Nithiwatthn and Subarya, C., Subarya, C. and Socquet, A, Socquet, A and Omar , K. H. and Abidin, H. Z. I. and Ambrosius, B. A. C. (2005) Insight into the 2004 Sumatra-Andaman earthquake from GPS measurements in southeast Asia. Nature, 436 . pp. 201-206. ISSN 00280836

Yunus, S. and Ujang, Zaini and M. R., Salim and Ahmad, A. and Marpongahtun, Marpongahtun (2005) A complete analysis on PHA production and their rates usingsunflower oil and mixed cultures : hydraulic retention times (HRT) effects. Jurnal Sains Kimia, 9 (3). pp. 31-41. ISSN 1410-5152

Book Section

O'Brien, Paul Edmond and Colomb, Robert M. (2005) Generic context driven situation detection and management. In: Proceedings of the IASTED International Conference on Internet and Multimedia Systems and Applications, EuroIMSA. Elsevier, pp. 101-106. ISBN 0889864861

Monograph

Abd Rahman, Ahmad Baharuddin and Rais, Ahmad Zaidon (2005) The Effects of Diaphragm Components in Resisting Lateral Stability of Precast Concrete Frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Gofar, Nurly and Kassim, Khairul Anuar (2005) Study of Compressibility Characteristics of Peat Soil Using Large Strain Consolidometer. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ismail, Che Ros and Hainin, Mohd. Rosli and Chik, Abdul Aziz (2005) Evaluation of Fundamental Properties of Compacted Mixes Used as Patching Materials for Low Volume Roads. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Kassim, Azman and Mohd. Amin, Mohd. For and Mohamad, Edy Tonnizam and Sa'afar, Nurul Azean and Abu Bakar, Mohd Najid (2005) Laboratory Studies Weathered Granites for Excavation Purposes. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Katimon, Ayob and Demun, Amat Sairin (2005) A Study of Flow Theory Towards The Different Degree of tropical Peat Decomposition. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohammad, Mohammad Ibrahim and Abdullah, Arham (2005) Determining the basic principles in managing project schedule for construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mustaffar, Mushairry and Ahmad, Azhar and Sa'ari, Radzuan (2005) Investigating the Feasibility of Photogrammetric Area-based Image Matching Technique in The Measurement of Three-Dimensional Deflections of Structures. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ramli, Mohd Zamri and Ahmad, Baderul Hisham and Abdul Rahman, Azlan (2005) Theoretical Assessment Of Bridge Structural Integrity From Vibration Signature Analysis. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Conference or Workshop Item

Abd Kadir, Aeslina (2005) Leachate treatibility study in subsurface flow constructed wetlands. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Abd Rahman, Norhan (2005) Evaluation study of infiltration in sewerage system. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd Rahman, Norhan (2005) Groundwater study for alluvial aquifer in tioman island. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd Rahman, Norhan (2005) Kajian keberkesanan kaedah takungan keatas kawalan air larian perbandaran. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd. Hamid, Abd. Rahim (2005) Accident investigation at construction sites. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd. Hamid, Abd. Rahim (2005) Kitaran semula bahan pembaziran binaan. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd. Rahman, Ahmad Baharuddin (2005) The importance of floor slabs in providing stability during erection of multi-storey precast concrete frames. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abdul Majid, M. Z. (2005) Classification of information technology infrastructure capability framework in malaysian construction consulting companies. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abdullah, Arham (2005) Designing a new framework for contractors tender evaluation. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abdullah, Arham (2005) Maintenance management (case study: UTM multi storey student hostel). In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Abdullah, Redzuan (2005) Web curling and end constraint effect on bending test of composite slab. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abu, Noorazman (2005) Drying shrinkage of slag cement based grout. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abu Bakar, Siti Nurhidayu (2005) Stormflow quality and non point source pollutant loadings from oil palm. In: Seminar Kebangsaan Pengurusan Persekitaran 2005,UKM, 2005, Bangi, Selangor.

Abu Bakar, Siti Nurhidayu (2005) Water quality ad non-point source pollutant liadings from oil palm catchments. In: Annual Fundamental Science Seminar, 2005, Ibnu Sina Institute for Fundamental Science Studies.

Ahmad, Kamarudin (2005) Compresssibility of H3PO4-treated soils. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Ahmad, Yusof (2005) Effect of different truss shapes to the design of plane truss strustures. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Ahmat Nor, Nor Irwan (2005) A comparison between 3 layer and 4 layer multilayer perceptron (MLP) for daily flow prediction. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Alel, Mohd. Nur Asmawisham (2005) Aplikasi dan keberkesanan E-dagang di dalam industri pembinaaan. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Alias, Noraliani (2005) Influence of volume and type of spillage on light nonaqueous phase liquid (LNAPL) migration. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Amerudin, Shahabuddin (2005) Flood extend nodelling using threshold method. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Anif, Bahrul (2005) Kesan daripada mengguakan bahan gantian jermang keluli relau arka elektrik pada sifat-sfat konkrit. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Aris, Azmi (2005) Degradation of a reactive dyestuff using poto-fenton oxidation. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

C. H., Chan (2005) Rainfall-runoff characteristics and modelling for an oil palm catchment. In: Seminar Kebangsaan Pengurusan Persekitaran 2005,UKM, 2005, Bangi, Selangor.

Che Abas, Mohd. Rosaidi (2005) The development of the seismographs. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Fathi, Mohamad Syzli (2005) The structure behaviour of ungrouted interlocking block wall masonry. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Fatimah, Eldina (2005) Preliminary investigations on wave structure interactions of an Artificial Mangrove Root System (ARMS). In: Proceedings 7th Annual IEM Water Resource Colloquium, 2005, Petaling Jaya, Selangor.

Gofar, Nurly (2005) Engineering properties of fibrous peat. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Gofar, Nurly (2005) Evaluation of the beginning of secondary compression of peat. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Hainin, Mohd. Rosli (2005) Compaction studies of hot mix aspahlt mixtures as related to permeability. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Hashim, Noor Baharim (2005) Simplified water quality analytical solution for upper langat river. In: MSTC 2005, 2005, Tidak Berkaitan.

Hashim, Noor Baharim (2005) Simulation of flushing in skudai river estuary using 1-D and 3-D models. In: The 2nd Regional Symposium On Environment And Natural Resources,Kuala Lumpur, Malaysia, 2005, Kuala Lumpur.

Hashim, Noor Baharin (2005) Modeling ciculation and salinity transport in the escata WPA river estuary. In: The 2nd Regional Symposium On Environment And Natural Resources,Kuala Lumpur, Malaysia, 2005, Kuala Lumpur.

Hashim, Noor Baharin (2005) A numerical model study of hypoxia in the tidal escata WPA river estuary. In: The 2nd Regional Symposium On Environment And Natural Resources,Kuala Lumpur, Malaysia, 2005, Kuala Lumpur.

Hashim, Noor Baharin (2005) A numerical study of hypoxia in langat river estuarine system. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Hendriyawan, Hendriyawan (2005) The development of software for seismec hazard study. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Hezmi, Muhammad Azril (2005) Relationship between geotechnical engineering properties of remolded residual soil with plasticity index. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Ishak, Mohd. Yunus (2005) Fibre reinforced polymer composites in construction. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Ishak, Mohd. Yunus (2005) Flexural behaviour of reinforced concrete beams strengthened with CFRP plates. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Ismail, Che Ros (2005) Development of hot mix patching guidelines for Jalan Kampung. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Jamal, M. Hidayat (2005) The effect of increasing the depth of a navigation channel on the rate of sediment deposition. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Jasmin, Lenny Sheryme (2005) The development of multi-blended cement (MBC) mortar on strength, water absorption and total porosity. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Jin Charles, Bong Hoo (2005) Non-darcian hydraulic characteristics of Malaysian peat soil: a laboratory investigation. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Kang, Lim Siong (2005) Effect of binder sand ration on fresh and hardened properties of grout. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Kang, Lim Siong (2005) Effect of slag on the basic properties of cement based grout. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Kang, Lim Siong (2005) Introduction to resin system in repairing. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Kasim, Fauziah (2005) Correlation regression between soil compaction parameters and atterberg limits. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Kassim, Azman (2005) Failure mode from back analysis of deformed cantilever sheet pile wall. In: IEM-GSM Oktoberforum2005' Case Histories in Engineering Geology and Geotechnical Engineering, Petaling jaya, 2005, Petaling Jaya, Selangor.

Mansur, Shaiful Amri (2005) Perbandingan kaedah pengukuran kemajuan kerja. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Marto, Aminaton (2005) Bearing capacity of soil overlaid by sand with interfacial bamboo-geotextile composite reinforcement. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Marto, Aminaton (2005) Some microstructure and index properties of southern penisular malaysia lateritic soils stabilised cement and palm oil clinker. In: Malaysian Science & Technology Congress, 2005, Kuala Lumpur.

Mat Sam, Abd. Rahman (2005) Flexural performances of strengthened RC beam exposed to tropical climate. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Md. Nor, Hasanan (2005) The construction of concrete block pavement on sloping road section using anchor beam. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Md. Rohani, Munzilah (2005) Analisis kiraan penjanaan perjalanan dan tahap perkhidmatan jalan menggunakan sistem maklumat geografi. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Memon, Noor Ahmed (2005) Flow characteristic of mortar mix for ferrocement. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Memon, Z. A. (2005) The DCM model: an expert system for evaluating the construction progress. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mesir, Baharin (2005) Penggunaan realiti maya di dalam bidang kejuruteraan awam. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohamad, Edy Tonnizam (2005) Assessment of groundwater by using 2D resistivity imaging. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohamad, EdyTonnizam (2005) Determination of weathering grade of granite by using uniaxial compressive strength test. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohamad Zin, Rosli (2005) Faktor-faktor penyenggaraan dalam rekabentuk. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Nasir, Kamarul Azlan (2005) Stormwater modelling using hec-hms in an urbanised catchment. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Noor, Fatimah (2005) Endurance testing of domestic water meters. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Noor, Fatimah (2005) A subsurface drainage system for a golf course. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Tajuddin, Ramli (2005) A study of oxygen transfer i pome aerated with air of different oxygen concentrations. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Yatim, Jamaluddin (2005) Effects of fibre orientation on single lap bolted joint of pultruded GFRP plates under tensile loading. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Yatim, Jamaluddin (2005) Properties of pultruded GFRP composites for structures: experimental study. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Yunus, Mohd. Zulkifli (2005) Pengendalian data spatial SMG dalam meramal keruntuhan cerun. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mohd. Yusof, Mohd. Badruddin (2005) Solid waste management and composition in rural areas: a case study of Johor Bharu, Malaysia. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Mustaffar, Mushairry (2005) Determination beam deflection using stereo digital images. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Omar, W. (2005) Improving the ductility of high strength concrete using steel straps confinement. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Omar, Wahid (2005) Pre chamber in post-tensioned I-beam: comparison between site and prediction values. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Osman, Mohd. Hanim (2005) Masalah tiang condong didalam keselamatan struktur. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Othman, Fadil (2005) Effect of pH and magnetic exposure time in enhancement of leachate sedimentation. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Othman, Fadil (2005) Electrocoagulant process for wastewater treatment. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Rahmat, Siti Nazahiyah (2005) Modeling of storm water runoff from residential and commercial catchments in Skudai, Johor using Storm Water Management6 Model (SWMM). In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Ramli, Mohd. Zamri (2005) Gempabumi-tugas berat untuk jurutera. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Ramli, Mohd. Zamri (2005) Information tecnology in civil engineering education. In: Konvensyen Teknologi Pendidikan Ke-18, 2005, Kuala Terengganu.

Rasiah, Kumarason (2005) Safety culture in construction. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Saad, Sariffuddin (2005) An investigation for the static strength of tubular T-joints using lusas software. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Saim, A. Aziz (2005) Structural performance of wellguard system for slope protection. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Sairan, F. M. and Ujang, Zaini and Md. Din, M. F. (2005) WASDA as a decision support system for membrane process : the case of MBR and RO. In: 1st IWA-ASPIRE Conference & Exhibition, 10 - 15 July 2005, Pan-Pacific Hotel, Singapore.

Sakri, Afidah Murni (2005) Laboratory investigation on co-flow and cross-flow thermal effluent discharges in open water channel flow. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Saleh, Abd Latif (2005) Application of steel fibre reinforced concrette for slab and wall panel as structural element. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Sari, Sri Adelila (2005) Development of decision support system riskas (version 1) for health risk assessment. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Shamsudin, Supiah (2005) Rainfall relationship of Putrajaya lake. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Singh, Bachan (2005) Maintenance management of repair works in tropical climate. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Yook, Lee Fun (2005) Efect of rainfall on the performance of subsurface flow constructed wetlands for leachate treatment. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Yusof, Zulkifli (2005) Estimation of soil and nutrient losses for quantifying watershed services. In: Rehabilitation of Degraded Tropical Forests, Southeast Asia 2005, 2005, Tsukuba, Japan.

Yusop, Zulkifli (2005) Hydrological properties of forested and oil palm catchments. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Zakaria, Fadhadli (2005) Turning waste into financial success-material engineer's experience. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Zakria, Fadhadli (2005) Microstructural investigations on slag cement based aerated lightweight concrete. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Thesis

A. Rashid, Ahmad Safuan (2005) Determination of plastic limit of soil using modified cone penetration method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Norashidah (2005) Static strength of tubular DT joints using LUSAS finite element software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Razak, Abdul Syukor (2005) Kajian guna semula efluen domestik untuk siraman tumbuhan lanskap. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty Of Civil Engineering.

Abdul Kudus, Baharuddin (2005) Variation orders in transmission projects of Tenaga Nasional Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Sukor, Nur Sabahiah (2005) Evaluation of laboratory compactive effort on asphaltic concrete mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Azliza (2005) Effect of impact load on the tubular steel members of offshore structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abdullah, Faridah (2005) Kajian pemulihan projek pembangunan kediaman terbengkalai di dalam Wilayah Persekutuan Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Mohd. Ezree (2005) Level of service (LOS) for multilane highway and road accident information system development of Batu Pahat area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah @ Mohd. Asmoni, Mat Naim (2005) A case study on quality management system in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Mohd. Azmir (2005) Behaviour of reinforced concrete frame at ultimate limit state. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Talib, Zaihasra (2005) Compressibilty and Young's modulus of filled joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Che Husni (2005) Non-linear analysis of a symmetric flush end plate bolted beam-to-column steel connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Fatimah Shafinaz (2005) Penggunaan sistem maklumat geografi untuk meramal keruntuhan cerun di Pulau Pinang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Abdul Ghani, Nadiatul Adilah (2005) Groundwater study for alluvial aquifer in Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ahmad Radzi, Ahmad Safuan (2005) The study of causes and effects of change order to engineering consultant practitioners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmat Nor, Nor Irwan (2005) Rainfall-runoff modelling using artificial neural network method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahyat, Abdul Kadir (2005) Analysis and design of hammerhead bridge pier using a strut and tie method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amin Abdullah @ Abu Bakar, Md. Hanafiah (2005) The effectiveness of natural ventilation design in low cost housing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arman Ali, Zainab (2005) Properties of Malaysian fired clay bricks and their evaluation with international masonry specifications - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Abd. Rahim (2005) Keupayaan galas tanah liat lembut bertetulang menggunakan gabungan buluh - geotekstil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azmi, Mastura (2005) Static load test - a comparison of ultimate load between statnamic and maintained load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Badrealam, Sabariah (2005) Numerical modelling of volatile organic compounds for multiphase flow and pollutant transport in nonisothermal porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Bong, Charles Hin Joo (2005) Non-darcian hydraulic characteristics Malaysian peat soil : a laboratory investigation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Che Ibrahim, Nor Adilah (2005) Kajian terhadap projek perumahan di Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Cheok, Hou Seng (2005) Development of a pc-based tank model real-time flood forecasting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gan, Ming Ong (2005) Lateral stability of high-rise building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gan, Sim Keat (2005) The effects of floor diaphragms to the lateral stability of multi-storey frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Govidasamy, Jayakumaran (2005) The effect of over dosage of concrete retarder daratard 40 in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hameed, Aftab (2005) Resource-driven scheduling : barriers to implementation. Masters thesis, University Teknologi Malaysia, Faculty Of Civil Engineering.

Hassan, Siti Hafizan (2005) Design phase constructability concepts in highway projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Sitti Asmah (2005) Driver's overtaking behavior on single carriageway road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Mohd. Fakhrurrazi (2005) Kesesuaian ujikaji-ujikaji makmal bagi menilai kebolehrobekan in-situ Batu Pasir dan Syal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Dzulkarnaen (2005) Services provided by project management consultant in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Fadzida (2005) Pengurusan insurans dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Neza (2005) Design considerations, practices and problems : a survey of private consultant firm perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Noor Akmal Adillah (2005) Keberkesanan sistem anggaran kos yang dipraktikkan oleh jurukur bahan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nurul Adzura (2005) Aggregation simulation model of flow and rainfall series. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaafar, Abu Almohtar (2005) Kajian terhadap sistem pengurusan penyelenggaran Jabatan Perumahan dan Pembinaan Angkatan Tentera Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamal, Mohamad Hidayat (2005) Prediction of sedimentation rates in a navigation channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Jeyaraman, Vadivelu (2005) Finite element analysis of reinforced concrete normal beam with web opening. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Johari, Zuraimi (2005) Mechanical properties of high strength concrete at high temperature loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jopely, Juliana (2005) Pengaruh kekuatan konkrit ke atas gayalaku sambungan rasuk-tiang luaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Kamarudin, Faizah (2005) Estimation of soil compaction parameters based on Atterberg limits. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamran, Kamran (2005) Evaluation of inflow/infiltration and flow characteristics for design of sanitary sewers in Skudai, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koh, Cheo Poh (2005) The causes of construction dispute on client organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kong, Chak Hing (2005) The behaviour of shear walls in global skeletal frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Koothayan, Yugabalan (2005) Probabilistic based design for connecting links in single point mooring system subjected to dynamic spectral fatigue line tension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ku Ahmad Ezham, Ku Azril Ridzhie (2005) Cadangan rekabentuk rangkakerja bagi pemilihan kontraktor binaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kumar, Guna (2005) Reliability analysis of prestressed concrete bridge girder beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kusuma, Iwan Permadi (2005) Load distribution in edge-stiffening beam of a simply supported bridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lam, Yuen Siong (2005) Earthwork activities in private housing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Ming Kai (2005) The behaviour of pinned beam-to-column connection in precast concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Lee, Poh Huat (2005) Case study to determine the camber of post- tensioned 'I' beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Siong Wee (2005) Nonlinear finite element analysis (NLFEA) of reinforced concrete tube in tube tall building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ling, Tieng Kooi (2005) Behaviour of precast concrete beam-to-column connection with hidden corbel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ling, Tung Chai (2005) Evaluation of cracks and disintegrations using close-range digital photogrammetry and image processing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Madon, Zulkifly (2005) The understanding of contract documentation in project implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Manoharan, Ravichandran (2005) Subcontractor selection method using analytic hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Masalamy @ Navaratnam, Visvan (2005) A survey of demolition works in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Zin, Mohamad Alwi (2005) Pengurusan bahan buangan pembinaan : satu kajian kes projek pembinaan Jalan Simpang Pulai Lojing - Gua Musang-Kuala Berang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mazri, Irma Azreen (2005) Critical success factors for the construction organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Ludin, Omar (2005) Faktor kejayaan kaedah reka dan bina : kajian terhadap kontraktor kerjasama. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Nor, Noorsuhada (2005) Remote data transfer for structural health monitoring of bridges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Md.Yusoff, Nur Izzi (2005) Kajian kelakuan pasir penyambung turapan penguncian blok konkrit pada jarak sambungan dan kecerunan yang berbeza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Memon, Irfan Ali (2005) Application of geographic information system in transportation for road network analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohamad, Musfa (2005) The use of limestone aggregate in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohamad Bhkari, Norshariza (2005) Modal analysis of concrete bridge decks subjected to free vibration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Nurul Hidayati (2005) A case study on the management of UTM new hostel based on design and build arrangement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ali, Ahmad Zurisman (2005) The effect of eccentricity at beam support to beam stiffness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hashim, Mohd. Hisbany (2005) Coconut fiber reinforced wall panelling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohd. Yunus, Khairul Nizam (2005) Penggunaan kaca buangan sebagai agregat halus dalam turapan asfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohd. Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing azo acid orange 7 by electricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohsan, Nor Maslina (2005) The creep behaviour of normal strength concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Musa, Sabariah (2005) Peramalan siri masa aliran sungai dengan kaedah arima dan pelicinan eksponen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mustakim, Fajaruddin (2005) Treating hazardous locations at federal route 50. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Kim Aik (2005) Survey on electronic procurement implementation in Malaysia construction companies. Masters thesis, University Technology Malaysia, Faculty of Civil Engineering.

Ng, Kok Shien (2005) Reliability analysis on the stability of slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Pui Ling (2005) Determination of optimum concentration of lime solution for soil stabilization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngui, Yeang Lin (2005) Behavior of beam-to-column connection in precast concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Oh, Chai Lian (2005) Stability of reinforced concrete structure on elastic (perfectly plastics) soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Othman, Norasman (2005) Simulation of saltwater intrusion in alluvial aquifer at Kg. Tekek, Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Rahmat, Siti Nazahiyah (2005) Modeling of non point source pollution from residental and commercial catchments in Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samad, Zaiton (2005) Study on iron and manganese removal in river water for textiles industry usage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sandra, Nevy (2005) Strut-and-tie method : analysis and its application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Shamsuddin, Siti Mazzuana (2005) A comparison between traditional pavement rehabilitation method as compared to recycling method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siah, Bee Yong (2005) The roles of manufacturers in achieving effective ISO 14001 certification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Silas Tirau, Larry (2005) Evaluation of hot mix asphalt(HMA) properties compacted at various temperatures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sim, Lee Gaik (2005) Mapping approach for examining waste management within construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sim, Lin Lin (2005) Microbial community analysis in upflow anaerobic sludge blanket for the treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syed Ali, Sharifah Rahimatul-Hana (2005) Pre-talent management for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty Of Civil Engineering.

Talib @ Harun, Juhaizah (2005) Waste auditing implementation system (WAIS) version 1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Tan, Cher Siang (2005) Buckling analysis of compression member with trapezoidal web profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Tan, Han Leng (2005) Human resource planning and human resource development in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Yu Chai (2005) Warping behaviour of cantilever steel beam with openings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tatiana Rina Puspasari, Tatiana Rina Puspasari (2005) Factors causing the poor performance of construction project. Masters thesis, Universiti Technologi Malaysia, Faculty of Civil Engineering.

Te, Shu Harn (2005) Assessment of longitudinal dispersion in QUAL2E and its application for Sungai Tebrau. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Tee, Bun Pin (2005) Strengthening of concrete slab with opening using external fiber reinforced polymer (FRP) strip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Then, Dennis Choo Khun (2005) Development of contractor's proposal process model in design-build procurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thian, Siaw Hui (2005) Leachate treatment by floating plants in constructed wetland. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Ahmad Kamal, Wan Ikram Wajdee (2005) Comparison of bridge design in Malaysia between American codes and British codes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Leong Sing (2005) Laboratory evaluation of horizontal coefficient of consolidation, Ch of fibrous peat soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yacob, Syamilah (2005) Maintenance management system through strategic planning for public school in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty Of Civil Engineering.

Yap, Sze Jeat (2005) Performance of the constructed wetlands for domestic wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Zakaria, Siti Fairus (2005) Introducing environment management system within construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

This list was generated on Thu Nov 27 04:37:30 2014 MYT.