Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | F | I | J | K | L | M | N | O | P | Q | R | S | T | U
Number of items at this level: 35.

A

Abdul Hanan, M. R. and Nasution, A. K. and Hussain, R. and Saidin, S. (2018) Fabrication of poly(lactic-co-glycolic acid)/calcium phosphate bone cement composite: synthesization of calcium phosphate from crab shells. Jurnal Teknologi, 80 (4). pp. 103-109. ISSN 0127-9696

Abubakar, Bashir Mohammed (2018) DNA barcoding and chemical analysis for evaluation of authenticity of selected herbal medicinal products in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Alzaidi, A. I. and Yahya, A. and Swee, T. T. and Idris, N. (2018) Development of high frequency generator for bipolar electrosurgical unit. International Journal of Engineering and Technology(UAE), 7 (2). pp. 20-23. ISSN 2227-524X

Arif, Muhammad Fadli (2018) Rehabilitation application program for obesity adolescent using structural equation modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Aziz, Nur Azian (2018) Shoot induction of abrus precatorius. Masters thesis, Universiti Teknologi Malaysia.

B

Binte Mostafiz, S. and Wagiran, A. (2018) Efficient Callus Induction and Regeneration in Selected Indica Rice. Agronomy, 8 (5). ISSN 2073-4395

D

Deba, Abdulkarim Ali (2018) Biosugar production from oil palm mesocarp fiber using crude lignocellulosic degrading enzymes from rhizomucor pusillus AK2. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Deba, A. A. and Mohd. Zain, N. A. and Salleh, M. (2018) Recent trend in residual palm oil recovery in a solid state fermentation. Jurnal Teknologi, 80 (3). pp. 9-21. ISSN 0127-9696

F

Fadzil, N. F. and Wagiran, A. and Salleh, F. M. and Abdullah, S. and Izham, N. H. M. (2018) Authenticity testing and detection of Eurycoma longifolia in commercial herbal products using bar-high resolution melting analysis. Genes, 9 (8). ISSN 2073-4425

I

Ismail, Siti Nurul Fasehah (2018) Characterization of a novel bacterial dehalogenase from cow dung. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

J

Jaganathan, S. K. and Prasath, M. M. (2018) UV induced surface modification on improving the cytocompatibility of metallocene polyethylene. Anais da Academia Brasileira de Ciencias, 90 (1). pp. 195-204. ISSN 0001-3765

K

Kamdi, Nurul Hafifi (2018) Antioxidant activity and antioxidant proteins dynamic simulation of Malaysia upland rice genotypes. Masters thesis, Universiti Teknologi Malaysia.

Keyvanfar, A. and Shafaghat, A. and Muhammad, N. Z. and Ferwati, M. S. (2018) Driving behaviour and sustainable mobility-policies and approaches revisited. Sustainability (Switzerland), 10 (4). ISSN 2071-1050

L

Lim, Aik Siang (2018) Bioinformatics analysis and molecular cloning of an extracellular serine protease from acinetobacter baumannii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lee, L. S. and Goh, K. M. and Chan, C. S. and Annie Tan, G. Y. and Yin, W. F. and Chong, C. S. and Chan, K. G. (2018) Microbial diversity of thermophiles with biomass deconstruction potential in a foliage-rich hot spring. MicrobiologyOpen, 7 (6). ISSN 2045-8827

Liew, K. J. and Teo, S. C. and Shamsir, M. S. and Sani, R. K. and Chong, C. S. and Chan, K. G. and Goh, K. M. (2018) Complete genome sequence of Rhodothermaceae bacterium RA with cellulolytic and xylanolytic activities. 3 Biotech, 8 (8). ISSN 2190-572X

M

Mad Salim, Mashitah (2018) Synthesis and characterization of cethyltrimethyl ammonium bromide and silver supported Nay zeolites for antibacterial applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mahmud, Nazriah (2018) Stabilize machining condition of electrical discharge machining to minimize friction of hip implant. PhD thesis, Universiti Teknologi Malaysia.

Mohammad, Norhasmira (2018) Automated detection of aortic annulus sizing based on decision level fusion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Aris, Siti Amirah (2018) Effect of heat pre-treatment on biohydrogen production by starch-degrading bacteria. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Zawai, Nurain Najwa (2018) Processed meat profiling using DNA barcoding. Masters thesis, Universiti Teknologi Malaysia.

N

Nadiha, Nor Azrini (2018) Virgin coconut oil based nanostructured lipid carrier loaded with ficus deltoidea extract for skin barrier improvement. Masters thesis, Universiti Teknologi Malaysia.

Narayanan, Leela T. (2018) Incentive spirometry prescription and inspiratory capacity recovery guideline for the early period after open heart surgery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Narayanan, Leela T. (2018) Incentive spirometry prescription and inspiratorycapacity recovery guideline for early period after open heart surgery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

O

Omar, Nur Amalina (2018) Influence of microbial inoculant on the oviposition and completion of life cycle of chrysomya megacephala and chrysomya rufifacies infesting rabbit carcasses. Masters thesis, Universiti Teknologi Malaysia.

P

Parjo, N. B. and Mohamed Zulkifli, R. and Md. Salleh, M. and Tencomnao, T. (2018) Antidandruff potential of Kaempheria galanga ethanolic extracts for hair cream formulation. Jurnal Teknologi, 80 (3). pp. 41-46. ISSN 0127-9696

Q

Qi, J. and Zhang, H. and Wang, Y. and Mani, M. P. and Jaganathan, S. K. (2018) Development and blood compatibility assessment of electrospun polyvinyl alcohol blended with metallocene polyethylene and plectranthus amboinicus (PVA/mPE/PA) for bone tissue engineering. International Journal of Nanomedicine, 13 . pp. 2777-2788. ISSN 1176-9114

R

Ramli, Amiladziffar (2018) Low cost temporary immersion bioreactor for micropropagation of local pineapple (Ananas comosus L.). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Renggu, Christine Rika (2018) The effects of lightweight macrocomposite on the treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Rifa’i, Muhaimin and Satwika, Dewi and Widodo, Nashi and Soewondo, Aris and Huyop, Fahrul Zaman and Tsuboi, Hideo (2018) Acid pH of saliva in dental caries of pre-school children repressed phagocytic capacity of neutrophil. Journal of Applied Pharmaceutical Science, 8 (2). ISSN 2231-3354

S

Sabaruddin, Muhamad Firdaus (2018) Acid red 27 biodecolourisation and biogenic electricity generation in stacked microbial fuel cell by citrobacter freundii a1 and enterococcus casseliflavus c1. Masters thesis, Universiti Teknologi Malaysia.

Singh, O. P. and Howe, T. A. and Malarvili, M. B. (2018) Real-time human respiration carbon dioxide measurement device for cardiorespiratory assessment. Journal of Breath Research, 12 (2). ISSN 1752-7155

T

Tapsir, Zafirah (2018) Incorporation of bioactive collagen type I and biomineralised hydroxyapatite on polydopamine grafted stainless steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Thevarajoo, S. and Selvaratnam, C. and Chan, K. G. and Goh, K. M. and Chong, C. S. (2018) Draft genome sequence of Vitellibacter aquimaris D-24T isolated from seawater. Brazilian Journal of Microbiology, 49 (1). ISSN 1517-8382

U

Utom, S. L. and Mohamad, E. J. and Ameran, H. L. M. and Kadir, H. A. and Muji, S. Z. M. and Rahim, R. A. and Pusppanathan, J. (2018) Non-Destructive Oil Palm Fresh Fruit Bunch (FFB) grading technique using optical sensor. International Journal of Integrated Engineering, 10 (1). pp. 35-39. ISSN 2229-838X

This list was generated on Thu Sep 19 03:35:40 2019 +08.