Items where Subject is "V Naval Science > VM Naval architecture. Shipbuilding. Marine engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | F | I | J | K | L | M | N | O | P | R | S | T | W | Y
Number of items at this level: 58.

A

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan (2015) Navigational safety model in port operation. In: The 2nd International Conference on Ocean Mechanical and Aerospace - Science & Engineering, 21 Okt, 2015, Indonesia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan and Wan Shamsuri, Wan Nurulhuda (2015) Design of lifeboat releasing system for ship board operation. In: The 2nd International Conference on Ocean Mechanical and Aerospace, 21-22 Okt, 2015, Indonesia.

Abd. Malik, Adi Maimin and Jamei, Saeed and Priyanto, Agoes and Che Sidik, Nor Azwadi (2010) Aerodynamic characteristics of wing of WIG catamaran vehicle during ground effect. WSEAS Transactions on Fluid Mechanics, 5 (3). 196 - 205. ISSN World Scientific and Engineering Academy and Society

Abd. Samad, Faisal Ikram (2009) Performance of catenary mooring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Samad, Faisal Ikram and Mohd. Yusop, Mohd. Yuzri and Shaharuddin, Nik Mohd. Ridzuan and Ismail, Nasrudin and Yaakob, Omar (2021) Slamming impact accelerations analysis on small high speed passenger crafts. Brodogradnja, 72 (1). pp. 79-94. ISSN 0007-215X

Abdul Hamid, Shamsul Effendy (2009) Fuzzy expert system package for the assessment of marine technology training programs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Malik, Adi Maimun and Priyanto, Agoes and Khairul Anuar, Khairul Anuar (2008) Manoeuvring control for pusher barge in restricted water. In: Advances In Marine Technology. Penerbit UTM, Johor, pp. 129-150. ISBN 978-983-52-0548-4

Abdul Malik, Asmawi (2009) Legal framework governing the carriage of liquified natural gas (LNG) within coastal water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Intan Fariza (2011) Fuzzy multi criteria decision making model for the selection of marine antifouling paints. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Mohd. Zamani and Abdul Mukti, Mohd. Afifi (1998) Marine technology education for the changing Malaysia : the role of marine technology laboratory at Universiti Teknologi Malaysia. Jurnal Mekanikal (5). ISSN 0127-3396

Ahmad, Nurulnatisya (2008) Development of fast craft seakeeping design methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Shaharudin (2001) Strength of longitudinally framed vessels and their components using analytical approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Abdel Razak, Yasser Mohamed and Yaakob, Omar and Elbatran, A. H. and Mazukee, U. J. A. (2014) Wells turbine for wave energy conversion for Malaysian ocean. Journal of Ocean, Mechanical and Aerospace-Science and Engineering-, 8 . pp. 12-16. ISSN 2354-7065

Andalas, Ronny (2005) Application of accuracy control system in Batam shipyard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Balaji, Rajoo and Yaakob, Omar (2014) Ballast water management triad: administration, ship owner and the seafarer. International Journal of Environmental, Ecological, Geological and Mining Engineering, 8 (8). pp. 474-477.

Bero, Anuar (2009) Performance prediction for high speed craft. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Che Wan Othman, Che Wan Mohd. Noor (2009) Manoeuvring prediction of offshore supply vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

F

Fahmie, Mohd. and Koto, J. and Tasri, Adek and Kamil, Insannul and Arief, Dodi Sofyan and Taufik, Taufik (2018) Offshore ocean thermal energy conversion in Layang-Layang Island, Sabah-Malaysia. Journal Of Subsea And Offshore -Science And Engineering-, 13 (1). pp. 12-23. ISSN 2442-6415

Feng, Aichun and Kang, Hooi Siang and Zhao, Binbin and Jiang, Zhiyu (2020) Two-dimensional numerical modelling of a moored floating body under sloping seabed conditions. Journal of Marine Science and Engineering, 8 (6). pp. 1-22. ISSN 2077-1312

Fitriadhy, Ahmad and Dewa, Syarifuddin and Mansor, Nurul Aqilah and Adam, Nur Amira and Ng, Cheng Yee and Kang, Hooi Siang (2021) CFD investigation into seakeeping performance of a training ship. CFD Letters, 13 (1). pp. 19-32. ISSN 2180-1363

I

Ismail, Azman (2009) Small boat identification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Tarmizi and Demun, Amat Sairin and Fadzil @ Zulkifly, Abu Bakar and Hashim, Noor Baharim (2006) Hydraulic investigation of channel under tidal influence. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

J

Jusoh, Iberahin and Wolfram, Julian (1996) Effects of marine growth and hydrodynamic loading on offshore structures. Jurnal Mekanikal, 1 (1). pp. 77-96. ISSN 0127-3396

K

Koh, Kho King (2002) Model-ship correlation study : a case study on Malaysian purse-seiner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

L

Lee, Kee Quen and Abu, Aminudin and Kato, Naomi and Muhamad, Pauziah and Lit, Ken Tan and Hooi, Siang Kang (2018) Performance of two- and three-start helical strakes in suppressing the vortex-induced vibration of a low mass ratio flexible cylinder. Ocean Engineering, 166 . pp. 253-261. ISSN 0029-8018

Lim, Joon Chai (2000) Pembangunan pangkalan data carta panduarah elektronik (ENC) S-57 edisi 3 untuk perairan Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Loh, Sheau Ping (2003) Hydrodynamic coefficients of manoeuvring for small vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

Maimun, Adi and Priyanto, Agoes and Muhammad, A. H. and Scully, C. C. and Awal, Z. I. (2011) Manoeuvering prediction of pusher barge in deep and shallow water. Ocean Engineering, 38 (3). pp. 1291-1299. ISSN 0029-8018

Mainal, Mohd. Ramzan and Kamil, Mohd. Salim (1996) Estimation of ship manoeuvring characteristics in the conceptual design stage. Jurnal Mekanikal, 1 (1). pp. 44-60. ISSN 0127-3396

Mansor, Muhammad Nasuha (2009) Initial investigation of ship resistance at river mouth area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mariasusai, Stephen (2009) IT security requirement analysis for maritime industry – commercial shipping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mat Saad, Khairul Anuar (2007) Manoeuvring control for pusher barge in inland waterway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Naiem, Mohd. Azzeri (2004) Viability study on the application of advance blasting method in Malaysian shipbuilding industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Md. Sap, Mohd. Noor and Mohebi, Ehsan (2008) An overview of outlier detection methods. Jurnal Teknologi Maklumat, 20 (1). pp. 87-105. ISSN 0128-3790

Mohd. Ayob, Amirul Adzhar and Yaakob, Omar (2015) Roll mitigation of small fishing boat. Journal Of Transport System Engineering, 2 (2). pp. 46-60. ISSN 2289-9790

Mohd. Sidek, Abdul Razak (1999) Hull design of dual function military craft using glass fibre-reinforced plastics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Morshidi, Mohammad (2009) Reliability of marine transportation in Miri oil and gas activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mostofa Kamal, Md. Abu Hena (2007) Seakeeping analysis of a Malaysian fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mukhtar, Zaimi Zainal (2009) A comparison of fatigue levels among Malaysian seafarers of different maritime sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustaffa Kamal, Iwan Zamil (2009) Further development of ship added resistances in head waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

N

Nababan, Bisman and Mastu, La Ode Khairum and Idris, Nurul Hazrina and Panjaitan, James P. (2021) Shallow-water benthic habitat mapping using drone with object based image analyses. Remote Sensing, 13 (21). pp. 1-23. ISSN 2072-4292

O

Olanrewaju, Oladokun Sulaiman (2006) Sustainable maintenance of navigation channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

P

Patrick, Bayo-Philip (2013) Application of low cost air drying model in traditimol shipbuilding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

R

Radzakrishnan, Loganathan (2014) System identification of offshore marine riser due to vortex induced vibration (VIV). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahimuddin, Rahimuddin (2013) Seakeeping performance of semi-swath in following sea using controlled fins stabilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Muhamad (2009) Alternative strip method for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Roslee, Ahmad Azmeer (2009) Productivity measurement in Malaysia shipbuilding industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

Saputra, Hendra (2013) Estimation and distribution of exhaust ship emission from marine traffic in the Straits of Malacca and Singapore using Automatic Identification System (AIS) data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Setyo Adi, Delint Ira (2011) Evalutionary algorithms for ship hull skinning approximation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shabara, H. M. and Yaakob, O. B. and Ahmed, Y. M. and Elbatran, A. H. (2015) CFD simulation of water gravitation vortex pool flow for mini hydropower plants. Jurnal Teknologi, 74 (5). pp. 77-81. ISSN 0127-9696

Shabara, H. M. and Yaakob, O. B. and Ahmed, Y. M. and Elbatran, A. H. and Faddir, M. S. M. (2015) CFD validation for efficient gravitational vortex pool system. Jurnal Teknologi, 74 (5). pp. 97-100. ISSN 1279-696

Shukri, Nurul 'Alyaa' (2013) Grammar systems in simple splicing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

T

Tay , Kho Jim (2004) A knowledge based system for preliminary ship design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

W

Wan Shamsuri, Wan Nurulhuda and Abd. Kader, Ab. Saman and Oladokun, Sulaiman (2015) Liquefied natural gas (LNG) safe loading and unloading model in port operation. Journal Of Ocean, Mechanical & Aerospace - Science And Engineering, 23 . pp. 7-15. ISSN 2354-7065

Y

Yaakob, O. B. and Ahmed, Y. M. and Abd. Rahman, M. M. and Elbatran, A. H. (2015) Development of low wake wash hull form. Jurnal Teknologi, 74 (5). pp. 101-104. ISSN 0127-9696

Yaakob, Omar and Majid, Zulkepli and Mohd. Ariff, Mohd. Farid and M. Idris, Khairulnizam and Ahmad, Badruzzaman (2014) Measuring small boats using non-contact method. Journal of Transport System Engineering, 1 (1). pp. 38-45. ISSN 2289-9790

Yeak, Su Hoe (1998) The effect of diffraction on large amplitude simulation of a fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, Y. and Sarmin, N. H. and Fong, W. H. and Goode, T. E. and Ahmad, M. A. (2013) An analysis of four variants of splicing system. In: AIP Conference Proceedings.

This list was generated on Tue Jul 5 03:44:02 2022 +08.