Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TP Chemical technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 3621.

A

Abu Bakar, Suraya H. and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and A. Manan, Zainuddin (2015) Initial analysis on heat exchanger networks of fatty acid fractionation plant to optimize energy recovery and controllability. Chemical Engineering Transactions, 45 . pp. 97-102. ISSN 2283-9216

Alias, N. and Zaini, M. A. A. and Kamaruddin, M. J. (2017) Relationships between dielectric properties and characteristics of impregnated and activated samples of potassium carbonate-and sodium hydroxide-modified palm kernel shell for microwave-assisted activation. Carbon Letters, 24 (1). pp. 62-72. ISSN 1976-4251

Amer Shah, Amalina (2017) In-silico structural analysis affecting thermostability in recombinant psychrophilic chitinase (CHI II) from Glaciozyma antarctica PI12. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar, Mohamad Hafizi (2015) Cellular functional roles of celastrol on mitochondrial dysfunction-induced insulin resistance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Azelan, Noor Amirah (2017) Optimization of hydrodistillation extraction conditions of zerumbone from Zingiber zerumbet rhizome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abd. Rahman, Noor Hidayah (2016) Xylitol production of recombinant escherichia coli immobilized on multi walled carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Manas, Nor Hasmaliana (2016) Reaction control and protein engineering of bacillus lehensis G1 maltogenic amylase for higher malto-oligosaccharide synthesis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar, Norshamiza (2016) Alpha mangostin optimized extraction by supercritical carbon dioxide technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abbasabadi, Reza Hassanzadeh (2015) A modified savonius turbine with moveable blades for higher efficiency. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Jamil, Syazwani (2014) Fabric for biomedical application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Alias @ Che Rashid, Noor Izawati\ (2010) Isolation, expression and characterization of recombinant α-L-arabinofuranosidase from Aspergillus niger ATCC 120120 IN Pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmad, Nor Azlina (2012) Anti-tyrosinase and cytotoxic activities of synthetic compound 2’-hydroxy-3,4,3’,4’-tetramethoxychalcone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ab. Rahman, Nur Syukriah (2014) Antioxdant, antimicrobial and wound healing properties of quercus infectoria gall extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abd. Talib, Norfahana (2017) Silica removal from rice straw for animal feed application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

A. Rahman, Azura Hanis (2015) Polyvinyl alcohol-alginate ferro photo gels for mercury (II) removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abdul Wahab, Mohd. Khairul Hakimi and Jonet, Mohd. Anuar and Md. Illias, Rosli (2016) Thermostability enhancement of xylanase aspergillus fumigatus rt-1. Journal of Molecular Catalysis B: Enzymatic, 134 . pp. 154-163. ISSN 1381-1177

A, Zuraida and Khalid, A. A. and Ismail, A. F. (2007) Performance of hybrid filament wound composite tubes subjected to quasi static indentation. Materials and Design, 28 . pp. 71-77.

A-Jalil, S. and Hashim, Haslenda and Hassim, Mimi Haryani and Johari, Anwar (2012) Fugitive emission reduction through optimization. Computer Aided Chemical Engineering, 31 . pp. 485-489. ISSN 1570-7946

A., Farizul and H. K., H. K. and N. A. S., Amina and D., Suhardy and S., Saiful Azhar and S., Mohd. Nazry (2006) Catalytic conversion of RBD palm oil to gasoline: the effect of silica- alumina ratio in HZSM-5. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

A. Ahmed Al-Dulaimi, Ahmed (2010) Evaluation of polyaniline composites and nanostructures as anti-corrosive pigments for carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

A. F., Rugayah and Abdul Aziz, Astimar and Ngadi, Norzita (2014) Preparation and characterisation of activated carbon from palm kernel shell by physical activation with steam. JOURNAL OF OIL PALM RESEARCH, 26 (3). p. 264. ISSN 1511-2780

A. Hamid, A. and W. Yusof, W. M. and M. Illias, R. and Nadarajah, K. (2001) Pengasingan Strain Baru Kulat Dari Tanah Di Malaysia Untuk Penghasilan Asid γ-Linolenik (GLA). Jurnal Teknologi C (34C). pp. 1-8. ISSN 0127-9696

A. Hamid, Khairedza Rahmi (2015) Optimization of cultivation medium for levan production using bacillus subtilis in semi-industrial scale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

A. Jalani, Jihan and Kidam, Kamarizan and Shahlan, Siti Suhaili and Kamarden, Hamidah and Hassan, Onn and Hashim, Haslenda (2015) An analysis of major accident in the US chemical safety board (CSB) database. Jurnal Teknologi, 75 (6). pp. 53-60. ISSN 2180–3722

A. Jalil, Aishah and Triwahyono, Sugeng and Adam, S. Hazirah and Rahim, N. Diana and A. Aziz, M. Arif and H. Hairom, N. Hanis and M. Razali, N. Aini and A. Z. Abidin, Mahani and A. Mohamadiah, M. Khairul (2010) Adsorption of methyl orange from aqueous solution onto calcined Lapindo volcanic mud. Journal of Hazardous Materials, 181 (1-3). pp. 755-762. ISSN 0304-3894

A. Jalil, Aishah and Triwahyono, Sugeng and M. Razali, N. Aini and H. Hairom, N. Hanis and Idris, Ani and M. Muhid, M. Nazlan and Ismail, Azlyana and M. Yahaya, N. Aisyah and L. Ahmad, N. Akma and Dzinun, Hazlini (2010) Complete electrochemical dechlorination of chlorobenzenes in the presence of various arene mediators. Journal of Hazardous Materials, 174 (1-3). pp. 581-585. ISSN 0304-3894

A. M., Mimi Sakinah and Ismail, Ahmad Fauzi and Mohd Illias, Rosli and Hassan, Osman (2007) Fouling characteristics and autopsy of a PES ultrafiltration membrane in cyclodextrins separation. Desalination, 207 (1-3). pp. 227-242. ISSN 0011-9164

A. M., Sakinah and Ismail, Ahmad Fauzi and Illias, Md Rosli and Hassan, Osman (2007) Development of enzymatic member reactor (EMR) for cyclodextrins production. Journal of Applied Science, 7 (15). 2028 -2032. ISSN 1812-5654

A. Manan, Muhammad (2006) Microscopic study of emulsion flow in porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

A. Manan, Muhammad and Ismail, Issham (1997) Pengurusan makmal berkualiti bagi makmal amali pelajar: pengalaman makmal pengujian petroleum, UTM. Seminar Kebangsaan Teknologi Makmal .

A. Manan, Muhammad and Othman, Ariff and Ismail, Issham and Ikhsan, Azman (1997) Petroleum fluid components that naturally formed. In: Properties of petroleum fluid. Penerbit UTM, Skudai, Johor Bahru, Malaysia. ISBN 983-52-0081-5

A. N, Kabbashi and Z. A, MD. and Othan, Ahmadi (2006) Biocomposting process for utilization agro-industrial wastes. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

A. Rahman, M. and Ismail, A. F. and Mustafa, A. (2007) The effect of residence time on the physical characteristics of PAN-based fibers produced using a solvent-free coagulation process. Materials science and engineering A, 448 . pp. 275-280. ISSN 0921-5093

A. Shirazi, Mohammad Mahdi and Kargari, Ali and Bazgir, Saeed and A. Shirazi, Mohammad Javad and Abdullah, Mohd. Sohaimi and Tabatabaei, Meisam and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2013) Characterization of electrospun polystyrene membrane for treatment of biodiesel's water-washing effluent using atomic force microscopy. Desalination, 329 . pp. 1-8. ISSN 0011-9164

A. Suleiman, Abu Bakar and Muhamad, Nor Asiah (2011) A case for the establishment of Malaysian standard for biodegradable insulation oil in Malaysia transformers. International Review on Modelling and Simulations (I.Re.Mo.S), 4 (6). pp. 2756-2763. ISSN 1974-9821

A.Rahman, Azura Hanis and Azman, Hassan (2007) The mechanical properties ofacrylonitrile-butadiene-styrene (abs) / nylon 6 / talc composites. Other thesis, Universiti Teknologi Malaysia.

Ab Kader, A. S. and Olanrewaju, O. S. (2013) River transportation master plan study for environmental enhancement. In: Marine Technology and Sustainable Development: Green Innovations. IGI Global, pp. 178-184. ISBN 978-146664318-5

Ab. Aziz, Muhammad Arif (2011) Preparation of platinum and nanosized nickel promoted HY zeolite for isomerization of n-pentane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Aziz, Muhammad Arif and Puad, Khalidah and Triwahyono, Sugeng and Abd. Jalil, Aishah and Khayoon, M. S. and Atabani, A. E. and Ramli, Zainab and Abdul Majid, Zaiton and Prasetyoko, D. and Hartanto, D. (2017) Transesterification of croton megalocarpus oil to biodiesel over WO3 supported on silica mesoporous-macroparticles catalyst. Chemical Engineering Journal, 316 . pp. 882-892. ISSN 1385-8947

Ab. Karim, Rozaliana (2015) Biochemical and morphological changes of UVB-Irradiated human skin fibroblast (HSF1184) cells on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Muis, Zarina (2014) Optimal planning of hybrid power generation system towards low carbon development. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Muis, Zarina (2012) Optimal solar-electricity generation for Iskandar Malaysia. In: 2nd Malaysian International Conference on Trends In Bioprocess Engineering (MICOTriBE 2012), 3-5 Jul 2012, Langkawi, Kedah.

Ab. Muis, Zarina and Hashim, Haslenda and Abd. Manan, Zainuddin and Douglas, P. L. (2011) Effect of fossil fuel price fluctuations on electricity planning comprising renewable energy. Asia-Pacific Journal of Chemical Engineering, 6 . pp. 552-562. ISSN 1932-2143

Ab. Muis, Zarina and Hashim, Haslenda and Abd. Manan, Zainuddin and Douglas, Peter L. (2011) Green power planning for energy security and sustainability. In: Proceedings Of The 3rd (2011) Cutse International Conference.

Ab. Muis, Zarina (2011) Feed-in tariff and fossil fuel price fluctuations on electricity planning. In: Postgraduate Colloquium For Environmental Research (Pocer 2011).

Ab. Rahim , Reehan Adne (2007) Development and characterization of polyethersulfone blends with polyimide mixed matrix membrane for oxygen and nitrogen gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ab. Rahman, Nur Syukriah (2014) Antioxidant, anti microbial and wound healing properties of quercus infectoria gall extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Ab. Rashid, Siti Fairuz and Abdul Majid, Zaiton and Attan, Nursyafreena (2015) Decolorizaton of methylene blue dye using magnetic ananas comosus leaf. In: Proceedings PSM Jabatan Kimia 2014/2015, 1 Apr-31 Dec, 2015, Johor Bahru, Johor.

Abang Hasbollah, Dayang Zulaika (2017) Evaluation and classification of potential sedimentary basins in Malaysia for carbon dioxide storage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abang Hasbollah, Dayang Zulaika and Junin, Radzuan (2017) Assessment of geological CO2 storage potential in central Luconia province. International Journal of Advanced And Applied Sciences (IJAAS), 4 (2). pp. 44-48. ISSN 2313-3724

Abang Mahmod, Dayang Salyani (2011) Preparation and characterization of polyacrylonitrile fiber precusor using multi-hole spinneret. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abang Zaidel, Dayang Norulfairuz and Chin, Nyuk L. J. and Yusof, Yushaizad A. M. and Abdul Rahman, R. N. Z. A. (2009) Analysis and correlation studies on gluten quantity and quality during production. Journal of Applied Sciences , 9 (9). pp. 1686-1694. ISSN 1812-5654

Abang Zaidel, Dayang Norulfairuz and Muhamad, Ida Idayu and Zainal Alam, Muhd. Nazrul Hisham and Sahat, Nur Shakira (2014) Stability study of water-in-oil emulsion containing anthocyanins from red cabbage. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 1-5. ISSN 0127-9696

Abang Zaidel, Dayang Norulfairuz and Sahat, Nur Shakira and Mohd. Jusoh, Yanti Maslina and Muhamad, Ida Idayu (2014) Encapsulation of anthocyanin from roselle and red cabbage for stabilization of water-in-oil emulsion. 2nd International Conference on Agricultural and Food Engineering (CAFE 2014) - New Trends Forward, 2 . pp. 82-89. ISSN 2210-7843

Abang Zaidel, Dayang Norulfairuz and Zainudin, Nurul Nadia and Mohd. Jusoh, Yanti Maslina and Muhamad, Ida Idayu (2015) Extraction and characterisation of pectin from sweet potato (ipomoea batatas) pulp. Journal of Engineering Science and Technology, 10 (3). pp. 22-29. ISSN 1823-4690

Abba, A. H. and Noor, Z. Z. and Aliyu, A. and Medugu, N. I. (2013) Assessing sustainable municipal solid waste management factors for Johor-Bahru by analytical hierarchy process. In: Advanced Materials Research.

Abba, A. H. and Rashid, M. and Hasfalina, C. M. and Noor, Zainura Zainon and Whei, T. B. (2010) Quantification of chlorine and hydrogen chloride in air using chemically treated filter. The IUP Journal of Environmental Sciences, 4 (4). pp. 65-80. ISSN 0973-9912

Abba, Ahmad Halilu (2014) Assessment of municipal solid waste disposal options using analytical hierarchy process and life cycle analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abba, Ahmad Halilu (2009) Catalytic ozonation of pharmaceuticals using activated carbon-metal loaded catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abba, Ahmad Halilu and Zainon Noor, Zainura and Yusuf, Rafiu O. and M. D. Din, Mohd. Fadhil and Abu Hassan, Mohd. Ariffin (2013) Assessing environmental impacts of municipal solid waste of Johor by analytical hierarchy process. Resources Conservation and Recycling, 73 . pp. 188-196. ISSN 0921-3449

Abba, Ahmad Halilu and M. Din, Moh’d Fadhil and Yusuf, Rafiu Olasunkanmi and Noor, Zainura Zainon (2011) Greenhouse gas emissions in Malaysia quantifying methane emissions from livestock. In: United Kingdom-Malaysia-Ireland Engineering Science Conference 2011.

Abbas, A. H. and Jaafar, M. Z. and Ismail, A. R. and Sulaiman, W. R. W. (2017) Adsorption of aerosol-OT on sand and shale at high sodium salt concentration. Chemical Engineering Transactions, 56 . pp. 151-156. ISSN 2283-9216

Abbasi, Ali (2016) Amine-bearing electrospun nanfibrous adsorbent using radiation induced grafting for carbon dioxide capturing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abbasi, Ali and El-Sayed Nasef, Mohamed Mahmoud and Takeshi, Matsuura and Majidi, Reza Faridi (2014) Electrospinning of nylon-6,6 solutions into nanofibers: rheology and morphology relationships. Chinese Journal of Polymer Science, 32 (6). pp. 793-804. ISSN 0256-7679

Abbasi, Mohammad Reza (2013) A mathematical model for water and energy networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abbaszadeh, Sahar and Wan Alwi, Sharifah Rafidah and Ghasemi, Nahid and Nodeh, Hamid Rashidi and Webb, Colin and Muhamad, Ida Idayu (2015) Use of pristine papaya peel to remove Pb(II) from aqueous solution. Chemical Engineering Transactions, 45 . pp. 961-966. ISSN 1974-9791

Abd Hamid, Mohd. Kamaruddin (2006) Gas processing and petroleum refining technology. [Teaching Resource] (Unpublished)

Abd Hamid, Mohd. Kamaruddin (2007) HYSYS: an introduction to chemical engineering simulation for UTM Degree++ program. Manual. Universiti Teknologi Malaysia. (Unpublished)

Abd Hamid, Mohd Kamaruddin and Mohd Yusof, Khairiyah and Hassim, Mimi Haryani and Baderon, Ahmad Kamal (2005) SKC 5771 Process Control Laboratory Student's Manual. Second Edition and Revised. [Teaching Resource] (Unpublished)

Abd Mutalib, M. and Othman, M. H. D. and Aziz, M. and A. Rahman, M. and Jaafar, J. and Ismail, A. F. and Mohamed, M. A. (2016) The influence of PEEK as a pore former on the microstructure of brush-painted LSCF cathodes. Journal of Solid State Electrochemistry, 20 (10). pp. 2895-2905. ISSN 1432-8488

Abd Mutalib, M. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. (2017) Scanning electron microscopy (SEM) and energy-dispersive x-ray (EDX) spectroscopy. In: Membrane Characterization. Elsevier Inc., pp. 161-179. ISBN 978-044463776-5

Abd. Alsaheb, Ramzi Ata (2016) Optimization of medium and cultivation conditions for D-lactic acid production using cassva starch. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abd. Aziz, Azila (2009) Mathematical modeling of an amperometric glucose sensor: the effect of membrane permeability and selectivity on performance. Jurnal Teknologi (Kejuruteraan) (51F). pp. 77-94. ISSN 0127-9696

Abd. Aziz, Azila (2009) Quantitative analysis of performance of a hydrogen peroxide-based glucose biosensor. Jurnal Teknologi (Kejuruteraan) (51F). pp. 96-106. ISSN 0127-9696

Abd. Aziz, Azila (2009) Systematic selection of material for an amperometric glucose biosensor. Jurnal Teknologi F (51F). pp. 107-120. ISSN 0127-9696

Abd. Aziz, Mustafa Kamal and Morad, Noor Azian and Mohd. Yunus, Sabariah and Abd. Razak, Abdul Syukor (2003) The study of heat penetration in palm oil fruitlets by developing a new technique for measuring oil content in fruiltlets during sterilization process. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Abd. Aziz, Azila and Abd. Rahman, Badarulhisam and Idris, Ani (2006) The Development and oprimization of process for the expression of sialylated recombinant human therapeutic glycoprotein in insect cell-baculovirus system. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Abd. Elhameed, Ahmed Bakheit Ahmed (2013) Production of biodiesel from jatropha oil by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Fatah, Rugayah (2017) Pome polishing treatment using palm kernel shell activated carbon produced via industrial kiln. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abd. Ghani, Amsal (2013) Lignin biodegradation by thermomyces lanuginosus EFB2 and aspergillus flavus EFB4 co-culture and pure culture in solid state fermentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abd. Hamid, Hazirah (2015) Combination of low pressure steam heating and dilute acid pretreatment of palm biomass for fermentable sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Hamid, Mohd. Kamaruddin (2006) Computer aided chemical engineering (Excel/VBA). [Teaching Resource] (Unpublished)

Abd. Hamid, Mohd. Kamaruddin (2004) Multiple faults detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abd. Hamid, Mohd. Kamaruddin and Abu Bakar, Suraya Hanim and Wan Alwi, Sharifah Rafidah and A. Manan, Zainuddin (2012) Development of a new model-based integrated process design and control for heat exchanger networks. In: 26th Symposium of Malaysian Chemical Engineers (SOMchE-2012) in conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), 21-23 Nov 2012, Kota Kinabalu, Sabah.

Abd. Hamid, Mohd. Kamaruddin and Ibrahim, Norazana and Ibrahim, Kamarul Asri and Ahmad, Arshad (2006) Simulation of hydrogen production for mobile fuel cell applications via autothermal reforming of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Abd. Hamid, Mohd. Kamaruddin and Ibrahim, Norazana and Sadikin, Aziatul Niza and Rasit Ali, Roshafima and Hasbullah, Hasrinah and Md. Kasmani, Rafiziana (2015) Production of biogas via anaerobic digestion from coconut copra waste and cow manure. In: GEASC 2015, 2-4 Dec, 2015, Japan.

Abd. Hamid, Nur Atiqah (2011) Polysulfone-titanium dioxide ultrafiltration membrane with enhanced fouling resistance for humic acid removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Hamid, Mohd. Kamaruddin and Gani, Rafiqul (2007) Integration of modeling, design and control for efficient operation of chemical processes. Graduate Schools Yearbook 2007 . pp. 3-6.

Abd. Jalil, Muhammad Fauzi (2014) In vitro lipid activity of eurycoma longifolia jack extracts loaded liposome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Jalil, Nurain (2016) Simple washing technique for removal of pesticides and heavy metals from vegetables and mussels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Kadir, Abd. Aziz and Hassan, Zulkafli (1991) Pencirian minyak mentah berlilin melalui kajian fizikal dan hubungannya dengan masalah parafin. Jurnal Teknologi, 18 . pp. 55-63. ISSN 2180-3722

Abd. Khari, Nurul Fatin (2017) Hydrogen adsorption on platinum doped activated carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Majid, Fadzilah@Adibah (2012) Basic research: aetiology and pathogenesis. In: europerio7, 2012, Autria.

Abd. Manan, Zainuddin (2011) Targeting the maximum carbon recovery for a total industrial site. In: International Conference Of Chemical Engineering And Industrial Biotechnology In Conjunction With 25th Symposium Of Malaysia Chemical Engineers 2011 (Icceib-Somche 2011).

Abd. Mutalib, Muhazri (2015) Structural characteristics of pore former assisted cathode layer in micro-tubular solid oxide fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abd. Rahim, Hazwan Faiz (2012) Methanation of simulated natural gas using alumina supported managanese doped ruthenium and palladium oxide catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Rahim, Siti Hajar and Mohd. Yusof, Mohd. Rashid and Andenan, Nurnadia and Ammar, M. R. (2015) Performance of a newly formulated filter aids material on particle penetration. In: Malaysia Japan Join International Conference, MJIIC 2015, 13-15 Nov, 2015, Japan.

Abd. Rahim, Siti Hajar and Mohd. Yusof, Mohd. Rashid and Andenan, Nurnadia and Ammar, M. R. (2015) Prekotac as a new filter aids material for fabric filter in air filtration system. In: Third International Postgraduate Conference, 24-26 Feb,2015, Johor Bahru, Johor.

Abd. Rahman, Faridah and Othman, Mohd. Fauzi (2015) Real time eye blink artifacts removal in electroencephalogram using Savitzky-Golay referenced adaptive filtering. In: International Conference for Innovation in Biomedical Engineering and Life Sciences, 6-8 Dec, 2015, Putrajaya, Malaysia.

Abd. Rahman, Nur Syuhada (2012) Solubility model of palm oil extraction from palm fruit using sub-critical R134a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Nurulaini (2014) Identification of protein from Eurycoma Longifolia root extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Roshanida and Md. Illias, Rosli and Mohd Ghazali, Mohd Nawawi and Ismail, Ahmad Fauzi and Hassan, Osman and Kamaruddin, Kamarulzaman (2004) Optimisation of growth medium for the production of cyclodextrin glucanotransferase from Bacillus stearothermophilus HR1 using response surface methodology. Process Biochemistry, 39 . pp. 2053-2060. ISSN 0032-9592

Abd. Rahman, Roshanida and Molla, Abul Hossain and Ahmadun, Fakhru'l Razi (2014) Assessment of sewage sludge bioremediation at different hydraulic retention times using mixed fungal inoculation by liquid-state bioconversion. Environmental Science and Pollution Research, 21 (2). pp. 1178-1187. ISSN 0944-1344

Abd. Rahman, Roshanida (2001) Siklodekstrin glukanotransferase (CGTase) daripada 'Bacillus Stearothermophilus' HR1 : pencirian separa dan pengoptimuman media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Sharifah Fahsuhaizam (2012) The physical properties and direct current conductivity of titanium (IV) dioxide ceramic doped lithium (II) nickel dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Rahman, Sunarti (2004) Development of defect-free and hyperthin-skinned of asymmetric cellulose acetate membrane from binary dope system for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abd. Rahman, Roshanida (2006) Synthesis of 2-O-a-D-glucopyranosyl L-ascorbic acid by cyclomaltodextrin glucanotransferase from bacillus sp. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Abd. Razak, Razif (2001) Assessment of potential oil and gas exploration investments : management perspective. Jurnal Teknologi E (34E). pp. 25-38. ISSN 0127-9696

Abd. Razak, Saiful Izwan and Ahmad Sharif, Noor Fadzliana and Mat Nayan, Nadirul Hasraf and Muhamad, Ida Idayu and Yahya, Mohd. Yazid (2015) Impregnation of poly(lactic acid) on biologically pulped pineapple leaf fiber for packaging materials. Bioresources, 10 (3). pp. 4350-4359. ISSN 1930-2126

Abdel-Fattah, Y. R. and El-Enshasy, Hesham Ali and Soliman, Nadia A. and El-Gendi, Hebah (2009) Bioprocess development for production of alkaline protease by bacillus pseudofirmus Mn6 through statistical experimental designs. Journal of Microbiology and Biotechnology, 19 (4). pp. 378-386. ISSN 10177825

Abdol Azis, Mohd. Hazmil Syahidy and Che Sidik, Nor Azwadi (2012) Analysis of bouyancy-aided convection heat transfer from horizontal cylinder at low Reynolds number. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 49-56. ISSN 0094-243X

Abdollahi, Y. and Zakaria, A. and Said, S. B. M. and Sabri, M. F. B. M. and Sairi, N. A. and Rezayi, M. and Abouzari Lotf, E. and Dorraj, M. and Islam, A. (2016) Modeling of photodegradation process to remove the higher concentration of environmental pollution. Desalination and Water Treatment, 57 (1). pp. 191-201. ISSN 1944-3994

Abdoulmohammad, Gholamzadeh Chofreh and Feybi, Ariani Goni and Ismail, Syuhaida and Awaluddin, Mohamed Shaharoun and Jiri, Jaromir Klemes and Zeinalnezhad, Masoomeh (2016) A master plan for the implementation of sustainable enterprise resource planning systems (part I): concept and methodology. Journal of Cleaner Production, 136 . pp. 176-182. ISSN 0959-6526

Abdui Majid, Zulkifli (1991) The reasons and problems for the renewed interest in natural gas and liquefied natural gas (LNG) world wide during the late 1980s and early 1990s. Jurnal Teknologi, 18 . pp. 43-53. ISSN 2180-3722

Abdul Awal, A. S. M. and Hussin, M. Warid (2011) Effect of palm oil fuel ash in controlling heat of hydration of concrete. Procedia Engineering, 14 . pp. 2650-2657. ISSN 1877-7058

Abdul Aziz, Azhar and Yahya, Adibah and Abdul Latiff, Zulkarnain and Aliyu, Abubakar Sadiq (2015) Biobutanol Production from the fermentation of oil palm frond extract using Clostridium acetobutylicum (ATCC4259). In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015) (JAKARTA, INDONESIA), 11-12 Nov, 2015, Indonesia.

Abdul Aziz, Azila and Jusoh, Norhana and Ashari, Mohd. Azizul and Hassan, Norhasliza (2010) Immobilization of glucose oxidase in freeze - thawed PVa and PVa/TMOS membranes. Jurnal Teknologi, 52 . pp. 181-192. ISSN 0127-9696 (Print); 2180-3722 (Electronic)

Abdul Aziz, Ezah (2015) An integrated pinch analysis framework for low carbon industrial site planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Aziz, Mustafa Kamal and Morad, Noor Azian and Mohd. Sulong, Mohd. Sulong (2003) Evaporation and distillation red oil from palm pressed fibres in semi-continuous structured packing pilot plant : experimental an economics factors. In: Malaysian Palm Oil Board International Palm Oil Congress (PIPOC), 2003, Putrajaya, Selangor.

Abdul Aziz, Nur Azmyra (2015) Mechanical, thermal and characterization of chitosan, nano precipitated calcium carbonate single and hybrid filler/ poly (vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Aziz, Nur Azmyra and Abu Bakar, Aznizam and Hassan, Azman and Azmi, Nurulhusna (2014) Synthesis of chitosan-grafted-poly(methyl methacrylate) with Fenton's Reagent (Fe2+-H2O2) as a redox initiator. Malaysian Journal of Analytical Sciences, 18 (2). pp. 415-422. ISSN 1394-2506

Abdul Aziz, Azila and Mat Daud, M. Nazri and Kassim, M. Hafiz (2005) Development of biosensor technology for detecting specific contaminants in environment and agriculture. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Abdul Fatah, Nor Aiza (2017) n-Heptane isomerization over platinum and phosphorus supported on modified molybdenum oxide-mesoporous silica. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abdul Fatah, Nor Aiza and Triwahyono, Sugeng and Abdul Jalil, Aishah (2016) Effect of support on molybdenum oxide acidity for n-heptane isomerization. Jurnal Teknologi, 78 (8-3). pp. 19-23. ISSN 0127-9696

Abdul Fattah, S. S. and Mohamed, R. and Jahim, J. M. and Illias, R. M. and Abu Bakar, F. D. and Murad, A. M. A. (2016) Commercial cellulases and hemicellulase performance towards oil palm empty fruit bunch (OPEFB) hydrolysis. In: 2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016, 13 April 2016 through 14 April 2016, Faculty of Science and Technology, Universiti Kebangsaan MalaysiaSelangor; Malaysia.

Abdul Gaffar, R. and Sazali, N. E. S. and Abdul Majid, F. A. (2008) Colour reduction and anti-microbial evaluation of pre-treated cashew leaves extract. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp ed.). pp. 1-9. ISSN 1823-5255

Abdul Gani, Madihah (2011) In vitro inhibition of human ovarian and colon cancer cell lines using crude bromelain in Ananas comosus juice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Ghani, Siti Waqina (2014) Characterization of chitosan/montmorillonite hybrid filled tapioca starch nanocomposite films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Ghani, Siti Waqina and Abu Bakar, Aznizam and Samsudin, Sani Amril (2013) Mechanical properties of chitosan modified montmorillonite filled tapioca starch nanocomposite films. In: Advanced Materials Research (Volume 686).

Abdul Halim, Khairul Azhar and Soloi, Sabrina and A. Majid, Rohah (2014) Synthesis of palm oil based polyol via glycerolysis and transamidation reactions for polyurethane foam production. In: 5th International Graduate Conference on Engineering Science & Humanity 2014 (IGCESH 2014), 19-21 August, 2014, Skudai, Johor.

Abdul Halim, Khairul Azhar (2013) Renewable resources polyol as chain extenders for waterborne polyurethane dispersion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Halim, Khairunnisa (2016) Two-stage anaerobic process coupled with single-stage aerobic process for raw palm oil mill effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Halim Yun, Hafizah (2013) Hydrogen production from glycerol using copper and nickel loaded zeolite based catalyst. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Hamid, Mariani (2007) The effect of feed composition on the solubility and dispersibility of coconut-based non-dairy creamer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Hamid, T. H. T. and Hamid, A. A. A. and Zulkifly, A. H. and Hamdan, S. and Ariffin, S. H. Z. and Huyop, Fahrul Zaman (2011) Purification and properties of a new dehalogese enzyme from pseudomos sp. b6p grow in 3-chloropropiote (3CP). African Journal of Biotechnology, 10 (4). pp. 610-614. ISSN 1684-5315

Abdul Hamza, Taha Mahdi (2015) Enhanced separation of azeotropic mixtures by ultrasound-assisted distillation process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Haq, R. H. and Wahab, M. S. and Wahid, M. U. (2016) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. Advanced Structured Materials, 61 . pp. 23-32. ISSN 1869-8433

Abdul Haq, R. H. and Wahab, M. S. and Wahit, M. U. B. (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). In: Applied Mechanics And Materials.

Abdul Jalil, Aishah and M. A., Hartini and S., Normala and A. M., Norhuda and M. H., N. Hanis and H. M., Razif and T., Sugeng (2007) Carbon dioxide fixation method for electrosynthesis of benzoic acid from chlorobenzene. Journal of Natural Gas Chemistry, 16 (3). pp. 273-277. ISSN 1003-9953

Abdul Jalil, Aishah and Nobuhito, K. and Tokuda, M. (2004) Synthesis of precursor of anti-inflammatory agents by using highly reactive zinc. Medical Journal of Malaysia , 59 . pp. 210-211. ISSN 03005283 (Submitted)

Abdul Jalil, Aishah and Abdullah, Zalizawati and Triwahyono, Sugeng (2006) The effect of sulfate ion on the synthesis of high octane fuel. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Abdul Jalil, Aishah and Triwahyono, Sugeng and Karim, Abdellah H. and Nordin, Norazzizi K. and Asli, Umi Aishah and Hassim, Mimi Haryani and Prasetyoko, Didik (2015) Grape-like mesostructured silica nanoparticle-decorated single-walled carbon nanotubes: silica growth and dye adsorptivity. RSC Advances, 5 (88). pp. 71796-71804. ISSN 2046-2069

Abdul Jalil, Aishah and Triwahyono, Sugeng and Yaakob, M. R. and Azmi, Zahra and Sapawe, Norzahir and Kamarudin, Noraziahtulhidayu and Setiabudi, Herma Dina and Nik Jaafar, Nik Fazlin Hiryati and M. Sidik, Saima and Adam, Siti Hazirah and Hameed, Bassim Hamid (2012) Utilization of bivalve shell-treated Zea mays l. (Maize) husk leaf as a low-cost biosorbent for enhanced adsorption of malachite green. Bioresource Technology, 120 . pp. 218-224. ISSN 0960-8524

Abdul Kadir, Abdul Aziz and Ismail, Issham (1997) Determination of crystallization of waxy crude and the influence of diluents. Proceedings of Regional Symposium on Chemical Engineering 1997 (2). pp. 316-325.

Abdul Kadir, Abdul Aziz and Ismail, Issham and Hamid, Mohd. Fauzi (1998) The formation of paraffin wax crystal in flow. Proceedings of International Conference on Mixing and Crystallization .

Abdul Kadir, Abdul Aziz and Ismail, Issham and Sengodan, Papathy (1999) Managing paraffin wax deposition in oilwell. Proceeds of World Engineering Congress .

Abdul Karim, Azila (2004) Re-refining of base oil from spent lubricant : a comparative study between laboratory and pilot scale study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Karim, Siti Kartina (2006) Effect of temperature and hydrogen on palm oil cracking over MCM-41/ZSM-5 composite catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Khalil, H. P. S. and Firoozian, P. and Jawaid, M. and Akil, H. M. and Hassan, Azman (2012) Preparation of activated carbon filled epoxy nanocomposites Morphological and thermal properties. Journal of Thermal Analysis and Calorimetry, 113 (2). pp. 623-631. ISSN 1388-6150 (Print); 1572-8943 (Electronic)

Abdul Latif, Azuan (2015) Optimization of biomass production of pseudomonas fluorescens in a stirred tank bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abdul Latif, Azuan and Hanapi, Siti Zulaiha and Abd. Malek, Roslinda and Velayutham, Sasidharan and Syed Mohamed, Syed Yassin and Lim, Pek Boon and Mohd. Aris, Alijah and Othman, Nor Zalina and Aziz, Ramlan and El Enshasy, Hesham (2014) Enhanced biomass production of pseudomonas flourescens for waste water treatment in shake flask and semi industrial scale bioreactor. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Abdul Latif, Fazilah and Salim, Norizah (1993) Kegunaan antikoagulan hirudin dari lintah dalam perubatan. Jurnal Teknologi, 21 . pp. 78-81. ISSN 2180-3722

Abdul Latiff, Norliza (2015) Fractionation and characterization of polyphenols rich extract from labisia pumila leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Supriyo, Bambang and Said, Mazlan (2008) Viability study of ethylene (C2H4) as an alternative fuel for gasoline engine. Jurnal Mekanikal (26). pp. 151-161. ISSN 0127-3396

Abdul Majid, Azri and Maarof, Mohd. Aizaini (2004) Real valued negative selection for anomaly detection in wireless ad hoc networks. In: Proceedings of the Postgraduate Annual Research Seminar 2006 (PARS 2006), 24 - 25 May 2006, Postgraduate Studies Department FSKSM, UTM Skudai.

Abdul Majid, Fadzilah Adibah and Abdul Gani, Madihah and Talib, Siti Zalita and Hasyim, Khadijah Khairillah (2008) Stability of bromelain-polyphenol complex in pineapple juice. Jurnal Teknologi F (49F). pp. 27-38. ISSN 0127-9696

Abdul Majid, Zulkifli and Yaacob, Zulkefli (2001) Alternative Piping Material For Malaysian Fuel Gas Distribution. Jurnal Teknologi F (35F). pp. 41-54. ISSN 0127-9696

Abdul Majid, F. A. and Teh, L. C. and Yap, L. F. and Poh, S. S. and Mashudin, M. and Abdul Gani, M. (2016) Pineapple is a super fruit, but how much can it be consumed? Acta Horticulturae, 1111 . pp. 203-212. ISSN 0567-7572

Abdul Majid, Fadzilah Adibah and Shian, L. P. (2008) Evaluating pre-treatment methods in the isolation and purification of monoclonal IgG antibody. Journal of Chemical & Natural Resources Engineering, 2 (Sp.Ed.). pp. 1-10. ISSN 1823-5255

Abdul Majid, N. F. and Ismail, I. and Hamid, M. F. (2016) Using durian rind as bridging material to overcome fluid loss and lost circulation problems in drilling operations. Jurnal Teknologi, 78 (8). pp. 109-115. ISSN 0127-9696

Abdul Majid, Z. and Mohsin, R. and Omar, F. (2008) Water jetting impact on natural gas pipeline. Journal of Chemical & Natural Resources Engineering, 2 . pp. 80-89. ISSN 1823-5255

Abdul Majid, Zulkifli (2017) Integrity assessment of buried pipe in erosive environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abdul Majid, Zulkifli and Mohsin, Rahmat (2012) Failure investigation of natural gas pipeline. Arabian Journal for Science and Engineering, 37 (4). pp. 1083-1088. ISSN 1319-8025

Abdul Majid, Zulkifli and Mohsin, Rahmat and Nasri, Noor Shawal (2016) Effect of bioethanol on engine performance and exhaust emissions of a diesel fuel engine. International Journal of Technology, 7 (6). pp. 972-980. ISSN 2086-9614

Abdul Majid, Fadzilah Adibah and Sarmidi, Mohamad Roji and Ramli, Mohd. Khairul Anuar (2005) Basic in vitro studies of human skin culture: melastoma malabathricum extract on fibroblasts growth. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Majid, Fadzilah Adibah (2002) Mammalian Cell Culture Technology. [Teaching Resource] (Unpublished)

Abdul Majid, Fadzilah Adibah and M, Butler and M, Al-Rubeai (2006) Glycosylation of an Immunoglobulin Produced From a Murine Hybridoma Cell Line: The Effect of Culture Mode and the Anti-Apoptotic Gene, bcl-2. Glycosylation of an Immunoglobulin Produced From a Murine Hybridoma Cell Line: The Effect of Culture Mode and the Anti-Apoptotic Gene, bcl-2, Biotechnology and Bioengineering, Vol. 97, No. 1, May 1, 2007 . pp. 1-14.

Abdul Majid, Zulkifli and Yaacob, Zulkefli and Ahmad Khan, Yasmin (2006) The use of natural gas as fuel for motorcycles. Gasteg. (Submitted)

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2007) Water pinch analysis evolution towards a holistic approach for water minimization. Asia-Pacific Journal of Chemical Engineering, 2 (6). pp. 544-553. ISSN 1547-5905

Abdul Manan, Zainuddin and Lim, Fang Yee (2004) Maximizing utility savings through appropriate implementation of combined heat and power scheme. Jurnal Teknologi A (41A). pp. 53-62. ISSN 0127-9696

Abdul Manan, Siti Najihah and Mohamad, Zurina (2014) The effect of blending ratio on mechanical properties of polylactic acid (PLA)/ethylene vinyl acetate (EVA). Applied Mechanics and Materials, 554 . pp. 194-198. ISSN 1660-9336

Abdul Manan, Siti Najihah and Mohamad, Zurina (2014) Tensile properties and morphology of polylactic acid (PLA)/ethylene vinyl acetate (EVA). In: Applied Mechanics and Materials, 19-21 August, 2014, Kuala Lumpur, Malaysia.

Abdul Manan, Zainuddin and Foo, C. Y. (2003) Assessing options for process changes via water cascade analysis. Journal of the Institute of Materials Malaysia . pp. 21-32.

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2006) Towards sustainable development using pinch analysis. In: SOMChe 2006, 19-20 December 2006, UiTM, Shah Alam.

Abdul Manan, Zainuddin and Yin, Ling Tan and Foo, Dominic Chwan Yee and Swee, Yin Tea (2007) Application of the water cascade analysis technique for water minimisation in a paper mill plant. International Journal of Environment and Polution, 29 (1-3). pp. 90-103. ISSN 0957-4352

Abdul Manan, Zainuddin (2006) Consider the bigger picture during energy audit to maximise energy savings. Jurutera (03). pp. 16-24. ISSN 0126-9909

Abdul Manan, Zainuddin (2004) Maximizing energy efficiency and minimizing environmental emissions in the process industry using thermal pinch analysis. ASEAN Journal of Chemical Engineering (AJChE), 4 (2). pp. 32-39. ISSN 1655-4418

Abdul Manan, Zainuddin and Foo, Sheek Hian (2000) Combining pinch and energy analysis for process improvement - a case study on an aromatics complex. Jurnal Teknologi F (33F). pp. 9-16. ISSN 0127-9696

Abdul Manan, Zainuddin and Hashim, Haslenda and Mansor, Shuhaimi (2000) Exergo-economic analysis of a batch chemical plant. Jurnal Teknologi F (32F). pp. 1-14. ISSN 0127-9696

Abdul Manan, Zainuddin and René, Bañares-Alcántara (2006) A Waste Minimization Approach for Process Design to Promote Opportunistic Recycling (Dept. of Chem Eng). Chemical Technology . pp. 5-7.

Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Samingin, Mohd Hisham and Misran , Norrazi (2006) Assess your plant’s true water-savings potential. Chemical Engineering, 113 (13). pp. 42-49.

Abdul Manan, Zainuddin and Ying, Ronald Chieh Ling (2003) A system design approach for overcoming heat exchanger fouling bottlenecks - a study on a refinery preheat train. Jurnal Jurutera Kimia Malaysia, 3 . pp. 21-32. ISSN 1675-8307

Abdul Manas, Nor Hasmaliana and Pachelles, Samson and Mahadi, Nor Muhammad and Md. Illias, Rosli (2014) The characterisation of an alkali-stable maltogenic amylase from bacillus lehensis G1 and improved malto-oligosaccharide production by hydrolysis suppression. Plos One, 9 (9). ISSN 1932-6203

Abdul Mudalip, Siti Kholijah (2007) Effects of ultrasonic waves on vapor-liquid equilibrium of normal binary and azeotropic mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Rahman, Anis Farhana (2016) Synthesis of titanium dioxide supported on mesostructured silica nanoparticles for photocatalytic decolourization of congo red. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Rahman, Anis Farhana and Abd. Jalil, Aishah and Triwahyono, Sugeng and Ripin, Adnan and Abd. Aziz, Fazilah Farhana and Abdul Fatah, Nor Aiza and Jaafar, Nur Farhana and Che Ku Hitam, Che Ku Nor Liana and Muhamad Salleh, Nur Fatien and Hassan, Nurul Sahida (2017) Strategies for introducing titania onto mesostructured silica nanoparticles targeting enhanced photocatalytic activity of visible-light-responsive Ti-MSN catalysts. Journal of Cleaner Production, 143 (1). pp. 948-959. ISSN 0959-6526

Abdul Rahman, Azmil (2006) Simulation and optimization of methanol autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Abdul Rahman, Roshanida and Amira, R. Dayana and Mohd. Setapar, Siti Hamidah and Rosli, Md. Illias (2013) Biodegradation of oil palm residues into compost using filamentous fungi. Advanced Science Letters, 19 (12). pp. 3529-3533. ISSN 1936-6612

Abdul Rahman, Mohd. Yaccob Khan and Mohd. Yusoff, Mohd. Rashid and Mustapha, Saari and Fernandes, Alan A. (1989) Design of industrial baghouse : Computer simulation technique. In: 5th. Chemical Engineering Symposium , 27-28 June 1989, Kuala Lumpur.

Abdul Razak, N. C. and Inuwa, I. M. and Hassan, Azman and Samsudin, S. A. (2013) Effects Of compatibilizers on mechanical properties of Pet/Pp blend. In: 8th Asian-Australasian Conference on Composite Materials (ACCM-8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Abdul Razak, Nor Erma Shuhadah (2016) Synthesis and characterization of hydroxyl terminated epoxidized natural rubber as a binder for solid rocket propellant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Razak, Rahmat and Rahman, Wahab A. and Sin, Lee Tin and Yussuf, Abdirahman A. (2009) Approaches to improve compatibility of starch filled polymer system : a review. Materials Science and Engineering C , 29 (8). pp. 2370-2377. ISSN 09284931

Abdul Shukor Lim, Nor Hasanah and Hussin, Mohd. Warid and Mohd. Sam, Abdul Rahman and Rafique Bhutta, Muhammad Aamer and Ariffin, Nur Farhayu and Abd. Khalid, Nur Hafizah and Samadi, Mostafa (2015) Properties of mortar containing high volume palm oil biomass waste. In: Advanced Materials Research, 20-22 Aug, 2014, Kuala Lumpur, Malaysia.

Abdul Sukor, Nur Sabahiah and Hassan, Sitti Asmah (2014) En route to a sustainable campus-an analysis of university students’ travel patterns via 7 day travel diary. Jurnal Teknologi, 70 (4). pp. 9-16. ISSN 0127-9696

Abdul Wahab, Mohd Khairul Hakimi and Jonet, Mohd Anuar and Md. Illias, Rosli (2016) Thermostability enhancement of xylanase aspergillus fumigatus rt-1. Journal Of Molecular Catalysis B: Enzymatic, 134 . pp. 154-163. ISSN 1381-1177

Abdul Wahab Baqr, Rebaz (2013) Studies to investigate the effects of nitrogen sources on androgenesis and carbon sources on shoot regeneration of aroma and non-aromatic types in indica rice (Oryza Sativa L). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdul Wahid, Mazlan and Ahmad Faiz, M. Z. and M. Saqr, Khalid (2012) Direct thrust force measurement of pulse detonation engine. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1257-1263. ISSN 0094-243X

Abdul-Aziz, A. and Hamid, M. A. and Noor, N. M. and Yaakob, H. and Hasham, R. and Sarmidi, M. R. (2014) Development of natural cosmeceuticals: harnessing Asia's biodiversity. In: Novel Plant Bioresources: Applications in Food, Medicine and Cosmetics. Wiley Blackwell, pp. 425-432. ISBN 978-111846056-6

Abdul-Aziz, A. and Yaakob, H. and Aziz, R. and Rahman, R. A. and Ngadiran, S. and Muhammad, M. F. and Harun, N. H. and Zamri, W. M. W. and Rosly, E. S. (2013) Case study: Statistical analysis of eurycomanone yield using a full factorial design. In: Mathematical and Statistical Methods in Food Science and Technology. wiley, pp. 43-54. ISBN 978-111843463-5

Abdul-Malek, Z. and Azzin, A. M. and Arief, Y. Z. and Aulia, Aulia and Lau, K. Y. and Jaafar, M. (2011) Influence of nanonasilica filler content in LDPE composites on partial discharge characteristics. Gaodianya Jishu/High Voltage Engineering, 37 (11). pp. 2629-2635. ISSN 1003-6520

Abdulbari, Abdulbari and Ahmad, A. and Hameed, Bassim H. and Aziz, N. (2006) Basic dye removal from synthetic wastewater by adsorption on palm ash. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Abdulhameed, M. A. and Othman, M. H. D. and Ismail, A. F. and Matsuura, T. and Harun, Z. and Rahman, M. A. and Puteh, M. H. and Jaafar, J. (2017) Preparation and characterisation of inexpensive porous kaolin hollow fibre as ceramic membrane supports for gas separation application. Journal of the Australian Ceramic Society, 53 (2). pp. 645-655. ISSN 0004-881X

Abdulhameed, M. A. and Othman, M. H. D. and Joda, H. N. A. A. and Ismail, A. F. and Matsuura, T. and Harun, Z. and Rahman, M. A. and Puteh, M. H. and Jaafar, J. (2017) Fabrication and characterization of affordable hydrophobic ceramic hollow fibre membrane for contacting processes. Journal of Advanced Ceramics, 6 (4). pp. 330-340. ISSN 2226-4108

Abdulhameed, Mohammed Abdulmunem (2017) Development of superhydrophobic ceramic hollow fibre membrances from Malaysian koalin for efficient carbon dioxide capture in membrance contactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Abdullah, Mohammad Sharir and Hasbullah, Hasrinah and Ibrahim, Norzana and Abd. Hamid, Kamaruddin (2007) Simulation and optimization of a butane autothermal reformer for fuel cell. Journal of Chemical and Natural Resources Engineering, 2 . pp. 1-13. ISSN 1823-5255

Abdullah, A. H. and Mat, R. and Aziz, A. S. A. and Roslan, F. (2017) Use of kaolin as adsorbent for removal of hydrogen sulphide from biogas. Chemical Engineering Transactions, 56 . pp. 763-768. ISSN 2283-9216

Abdullah, Abdullah and Mat, H. B. (2017) The characteristic of pineapple waste from canning industry. Advanced Science Letters, 23 (6). pp. 5691-5693. ISSN 1936-6612

Abdullah, Alwthinani Sarhan (2011) Effect of pani/epoxy on the corrosion resistance of 304 stainless steel and BS 1387 carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Arman Shah (2010) Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, F. I. and Chua, L. S. and Rahmat, Z. (2017) Comparison of protein extraction methods for the leaves of ficus deltoidea. Journal of Fundamental and Applied Sciences, 9 (2). pp. 908-924. ISSN 1112-9867

Abdullah, F. I. and Chua, L. S. and Rahmat, Z. (2017) Prediction of C-glycosylated apigenin (vitexin) biosynthesis in Ficus deltoidea based on plant proteins identified by LC-MS/MS. Frontiers in Biology, 12 (6). pp. 448-458. ISSN 1674-7984

Abdullah, F. I. and Chua, L. S. and Rahmat, Z. and Samad, A. A. and Wagiran, A. (2016) Plant genomic DNA extraction for selected herbs and sequencing their internal transcribed spacer regions amplified by specific primers. Natural Product Communications, 11 (10). pp. 1491-1496. ISSN 1934-578X

Abdullah, Mohd. Shahir (2006) Simulation and optimization of butane autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Abdullah, N. and Gohari, R. J. and Yusof, N. and Ismail, Ahmad Fauzi and Juhana, J. and Lau, W. J. and Matsuura, T. (2016) Polysulfone/hydrous ferric oxide ultrafiltration mixed matrix membrane: preparation, characterization and its adsorptive removal of lead (II) from aqueous solution. Chemical Engineering Journal, 289 . pp. 28-37. ISSN 1385-8947

Abdullah, N. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. and Aziz, A. A. (2016) Preparation and characterization of self-cleaning alumina hollow fiber membrane using the phase inversion and sintering technique. Ceramics International, 42 (10). pp. 12312-12322. ISSN 0272-8842

Abdullah, N. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. (2016) Preparation and characterization of dual layer thin layer lanthanum strontium cobalt ferrite /alumina hollow fiber membrane using dip-coating and brush-coating techniques. Sains Malaysiana, 45 (11). pp. 1715-1721. ISSN 0126-6039

Abdullah, N. and Yusof, N. and Jaafar, J. and Ismail, A. and Othman, F. E. C. and Hasbullah, H. and Salleh, W. N. W. and Misdan, N. (2016) Preparation of polyacrylnitrile (PAN)/ Manganese oxide based activated carbon nanofibers (ACNFs) for adsorption of Cadmium (II) from aqueous solution. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, The Pacific Sutera HotelKota Kinabalu, Sabah; Malaysia.

Abdullah, N. and Yusof, N. and Jaafar, J. and Ismail, A. F. and Che Othman, F. E. and Hasbullah, H. and Salleh, W. N. W. and Misdan, N. (2015) Preparation of polyacrylonitrile/ manganese dioxide- based activated carbon nanofibers for adsorption of cadmium ions from aqueous solution. In: 5th International Conference on Chemical and Bioprocess Engineering (ICCBPE), 9-12 Dec, 2015, Kota Kinabalu, Malaysia.

Abdullah, Norfadhilatuladha and Abu Shah, Mohamad Hafizuddin and Yusof, Norhaniza and Ismail, Ahmad Fauzi and Jaafar, Juhana and Lau, Woei Jye and Wan Salleh, Wan Norharyati (2015) Adsorption of chromium (VI) via adsorptive PES-HFO ultrafiltration mixed matrix membrane. In: 2nd International Conference on Desalination using Membrane Technology, 26-19 July, 2015, Singapore.

Abdullah, Norfadhilatuladha and Yusof, Norhaniza and Jaafar, Juhana and Ismail, Ahmad Fauzi and Che Othman, Faten Ermala and Misdan, Nurasyikin (2015) Preparation of composite activated carbon nanofibers (ACNFs) for adsorption of heavy metals. In: International Conference on Low Carbon Asia (ICLCA 2015), 11-12 Oct, 2015, Johor Bahru, Malaysia.

Abdullah, Norfazliana (2016) Preparation and characterization of dual layer lanthanum strontium cobalt ferrite/alumina hollow fibre membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Norhanisah (2017) Elastase and inflammation inhibitory from Labisia pumila. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdullah, Z. B. and Razani, W. A. S. S. B. W. M. and Chyang, P. J. and Hisam, R. B. H. (2016) The cytotoxicity effect of Nephelium lappaceum leaves extract on human cancer cells. In: 2016 International Conference on Applied System Innovation, IEEE ICASI 2016, 28 May 2016 through 1 June 2016, Okinawa Convention Center4-3-1 MashikiGinowan City Okinawa; Japan.

Abdullah Hisham, Nur Syafiqah and Abdul Razak, Saiful Izwan and Mat Nayan, Nadirul Hasraf and Wan Ab. Rahman, Wan Aizan (2015) Influence of polyaniline coated kenaf fiber on kenaf paper sheet. In: 4th International Conference on Engineering and Innovative Materials (ICEIM 2015), 3-4 Sept, 2015, Pulau Pinang, Malaysia.

Abdullah Sani, Nur Aimie (2015) Performance of polyphenylsulfone/copper benzenetricarboxylate framework nanofiltration membrane for organic solvents separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abdullah Sani, Nur Syazana and Arsad, Agus and Rahmat, Abdul Razak (2014) Synthesis of a compatibilizer and the effects of monomer concentrations. Applied Mechanics and Materials, 554 . pp. 96-100. ISSN 1660-9336

Abdullahi, Mohammed Evuti and Abu Hassan, Mohd. Ariffin and Noor, Zainura Zainon and Raja Ibrahim, Raja Kamarulzaman (2014) Application of a packed column air stripper in the removal of volatile organic compounds from wastewater. Reviews in Chemical Engineering, 30 (5). pp. 431-451. ISSN 0167-8299

Abdurahim, Mohd. Ezzad Iskandar (2010) Curing characteristics and tensile properties of natural rubber/expoxidized natural rubber-50 nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abel, Stashia Eleaness Roland (2013) The extraction of essential oil from Quercus Infectoria galls using supercritical carbon dioxide pressure swing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abidin, Z.R.Z. and Ismail , A.F. and Aziz, M. and Sanip, S.M. and Buang, N. (2003) Pre-Treatment Of Natural Graphite As Starting Material For Carbon Nanotube Synthesis. Proceedings of Advances in Malaysian Fuel Cell Research and Development .

Abidin, M. N. Z. and Goh, P. S. and Ismail, A. F. and Othman, M. H. D. and Hasbullah, H. and Said, N. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2017) The Effect of PCA-g-MWCNTs loading on the performance of PES/MWCNTs hemodialysis membrane. Chemical Engineering Transactions, 56 . pp. 1609-1614. ISSN 2283-9216

Abidin, M. N. Z. and Goh, P. S. and Ismail, A. F. and Othman, M. H. D. and Hasbullah, H. and Said, N. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2017) Development of biocompatible and safe polyethersulfone hemodialysis membrane incorporated with functionalized multi-walled carbon nanotubes. Materials Science and Engineering C, 77 . pp. 572-582. ISSN 0928-4931

Abidin, Mahani A. Z. and Abd Jalil, Aishah and Triwahyono, Sugeng and Adam, S. Hazirah and Kamarudin, N. H. Zirah (2011) Recovery of gold (iii) from an aqueous solution onto a durio zibethinus husk. Biochemical Engineering Journal, 54 . pp. 124-131. ISSN 1369-703X

Abidin, M. N. Z. and Goh, P. S. and Ismail, A. F. and Othman, M. H. D. and Hasbullah, H. and Said, N. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2016) Antifouling polyethersulfone hemodialysis membranes incorporated with poly (citric acid) polymerized multi-walled carbon nanotubes. Materials Science and Engineering C, 68 . pp. 540-550.

Abioye, Adekunle Moshood and Ani, Farid Nasir (2015) The characteristics of oil palm shell biochar and activated carbon produce via microwave heating. In: Applied Mechanics and Materials, 2015.

Abouzari Lotf, E. and Nasef, M. M. and Zakeri, M. and Ahmad, A. and Ripin, A. (2017) Composite membranes based on heteropolyacids and their applications in fuel cells. In: Organic-Inorganic Composite Polymer Electrolyte Membranes: Preparation, Properties, and Fuel Cell Applications. Springer International Publishing, pp. 99-131. ISBN 978-331952738-3

Abouzari-Lotf, E. and Ghassemi, H. and Nasef, M. M. and Ahmad, A. and Zakeri, M. and Ting, T. M. and Abbasi, A. and Mehdipour-Ataei, S. (2017) Phase separated nanofibrous anion exchange membranes with polycationic side chains. Journal of Materials Chemistry A, 5 (29). pp. 15326-15341. ISSN 2050-7488

Abouzari lotf, E. and Jacob, M. V. and Ghassemi, H. and Ahmad, A. and Nasef, M. M. and Zakeri, M. and Mehdipour Ataei, S. (2016) Enhancement of fuel cell performance with less-water dependent composite membranes having polyoxometalate anchored nanofibrous interlayer. Journal of Power Sources, 326 . pp. 482-489. ISSN 0378-7753

Abouzari-lotf, E. and Mehdipour-Ataei, S. and Nasef, M. M. and Ghassemi, H. and Zakeri, M. and Ahmad, A. and Ripin, A. (2015) Sandwich structure polymer electrolyte membranes containing phosphotungstic acid immobilized electospun nanofibers. In: 5th International Conference on Fuel Cell & Hydrogen Technology 2015, 1-3 Sept, 2015, Kuala Lumpur, Malaysia.

Abouzari-lotf, Ebrahim Abouzari and Nasef, Mohamed Mahmoud and Ghassemi, Hossein and Zakeri, Masoumeh and Ahmad, Arshad and Abdollahi, Yadollah (2015) Improved methanol barrier property of Nafion hybrid membrane by incorporating nanofibrous interlayer self-immobilized with high level of phosphotungstic acid. ACS Applied Materials and Interfaces, 7 (31). pp. 17008-17015. ISSN 1944-8244

Abron, Khatereh and Wahit, Mat Uzir and Bahraeian, Sobhan (2011) A study on thermal and electrical properties of high density polyethylene/high density polyethylene grafted maleic anhydride/montmorillonite/polypyrrole blend. Scientific Research and Essays, 6 (30). pp. 6285-6292. ISSN 1992-2248

Abu Bakar, Aznizam and Hassan, Azman (2003) Impact properties of oil palm empty fruit bunch filled impact modified unplasticised poly (vinyl chloride) composites. Jurnal Teknologi Siri Khas A (39A). pp. 73-82. ISSN 0127-9696

Abu Bakar, A. and Subre, A. (2008) Optimized conditions for grafting reaction of poly (methyl methacrylate) onto talc filler. Journal of Chemical and Natural Resources Engineering, 2 . pp. 72-79. ISSN 1823-5255

Abu Bakar, Aznizam (2006) Mechanical, thermal and processing properties of oil palm empty fruit bunch-filled impact modified unplasticised poly (vinyl chloride) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Bakar, Aznizam and Hassan, Azman and Mohd. Yusof, Ahmad Fuad (2010) Comparative study of the effects of chlorinated polyethylene and acrylic impact modifier on the thermal degradation of poly(vinyl chloride) compounds and poly(vinyl chloride)/(oil palm empty fruit bunch) composites. Journal of Vinyl & Additive Technology, 16 (2). 135 - 140. ISSN 1548-0585

Abu Bakar, Aznizam and Hassan, Azman and Mohd. Yusof, Ahmad Fuad (2010) A comparative study on the mechanical properties between acrylic and chlorinated polyethylene impact modified poly (vinyl chloride)/oil palm empty fruit bunch composites: effect of accelerated weathering. Polymer-Plastics Technology And Engineering, 49 (4). 359 - 366. ISSN 0360-2559 print = 1525-6111 online

Abu Bakar, Aznizam and Hassan, Azman and Mohd. Yusof, Ahmad Fuad (2006) The effect of oil extraction of the oil palm empty fruit bunch on the processability, impact, and flexural properties of PVC-U composites. International Journal of Polymeric Materials , 55 (9). pp. 627-641. ISSN 0091-4037

Abu Bakar, Aznizam and Samsudin, Sani Amril and Azmi, Nurulhusna and Abdul Aziz, Nur Azmyra (2014) Preparation and characterization of tapioca starch filled polycaprolactone composite films. Malaysian Journal of Analytical Sciences, 18 (3). pp. 612-617. ISSN 1394-2506

Abu Bakar, Aznizam and Tham, Boon Keat and Hassan, Azman (2010) Tensile properties of a poly(vinyl chloride) composite filled with poly(methyl methacrylate) grafted to oil palm empty fruit bunches. Journal of Applied Polymer Science, 115 (1). 91 -98. ISSN 1097-4628

Abu Bakar, M. H. and Sarmidi, M. R. and Tan, J. S. and Mohamad Rosdi, M. N. (2017) Celastrol attenuates mitochondrial dysfunction and inflammation in palmitate-mediated insulin resistance in C3A hepatocytes. European Journal of Pharmacology, 799 . pp. 73-83. ISSN 0014-2999

Abu Bakar, Noor Fitrah and Ujang, Zaini (2004) Membrane Bioreactor For Leachate Treatment. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Abu Bakar, Siti Maryam (2016) Environmental sustainability index for palm oil mill industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2014) Controllability analysis on delta temperature minimum to obtain operable and flexible heat exchanger network. In: 5th Annual Conference International Graduate Conference on Engineering, Science and Humanities 2014 (IGCESH2014), 19-21 August, 2014, Johor Bahru, Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2016) An industrial case study application in synthesizing a feasible heat exchanger network. In: Regional Conference on Chemical Engineering 2016, 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2015) Initial analysis on heat exchanger networks of fatty acid fractionation plant to optimize energy recovery and controllability. In: 18th Conference of Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction (PRES'15), 23-27 Aug, 2015, Sarawak, Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2016) Sensitivity analysis of industrial heat exchanger network design. In: Regional Conference on Chemical Engineering 2016, 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Abu Bakar Sidik, Dilaeleyana (2013) Synthesis and characterization of renewable carbon cryogel beads from empty fruit bunch for adsorption of ethyl orange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar Sidik, Dilaeleyana and Alias, Hajar and Ngadi, Norzita and Ishak, Siti Aktar (2011) Production of biodiesel from palm and soybean oils. In: Universiti Malaysia Terengganu 10Th International Annual Symposium (Umtas 2011).

Abu Ghalia, Mustafa A. (2011) Mechanical, rheological, and thermal properties of calcium carbonate filled polypropylene / linear low density polyethylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Hassan, Mohd. Ariffin and Lim, Soo Hui and Noor, Zainura Zainon (2009) Removal of boron from industrial wastewater by chitosan via chemical precipitation. Journal of Chemical and Natural Resources Engineering, 4 (1). pp. 1-11. ISSN 1823-5255

Abu Hassan, Mohd. Ariffin and Tan, Pei Li and Noor, Zainura Zainon (2009) Coagulation and flocculation treatment of wastewater in textile industry using chitosan. Journal of Chemical and Natural Resources Engineering, 4 (1). pp. 43-53. ISSN 1823-5255

Abu Hassan, Mohd. Ariffin and Kim, Jung K. and Metcalfe, Ian S. and Mantzavinos, Dionissios (2006) Kinetics of low frequency sonodegradation of linear alkylbenzene sulfonate solutions. Chemosphere, 62 (5). pp. 749-755. ISSN 0045-6535

Abu Hassan, Muhd. Hafiz and Wan Abdul Rahman, Wan Aizan (2007) Palm leaves reinforced calcium carbonate/adhesive/polyaluminium chloride as a potential roofing material. Other thesis, Universiti Teknologi Malaysia.

Abu Hassan, Shukur (1998) Kaedah-kaedah proses pembuatan menghasilkan produk berasaskan bahan rencam (komposit) plastik bertetulangkan gentian kaca (GFRP). Jurnal Mekanikal, 1 (5). pp. 31-47. ISSN 0127-3396

Abu Hassan, Mohd. Ariffin (2008) Wet Air Oxidation (WAO) treament of wastewater from textile industries. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Abu Hassan , Mohd. Ariffin and Mantzavinos, Dionissios and Metcalfe, Ian S. (2007) Ultrasonic irradiaton of the removal of linear alkylbenzena sulphonates (LAS) from wastewater. Jurnal Teknologi , 46 (F). pp. 27-40. ISSN 0217-9696 (Print); 2180-3722 (Electronics)

Abu Hassan, Mohd. Ariffin and Mohd. Yunus, Rosli and Khamis, Aidee Kamal (2006) The effect of homogeneous catalyst for the degradation of sodium dodecylbenzene sulfonate in water by means of ultrasonic irradiation. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abu Samah, Rozaimi and Nik Mahmood, Nik Azmi and Goh, Kian Mau and Hassan, Osman and Md Illias, Rosli (2008) Production of thermostable pullulanase from Bacillus flavothermus KWF-1: medium development using experimental design with data transformation. Jurnal Teknologi (49F). pp. 383-396. ISSN 0127-9696

Abu Samah, Khamisah (2012) Physical and mechanical properties of clay recycle glass-paper ceramic by slip casting technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abubakar, Umar Isah (2016) Optimization and kinetics of green pressurized-liquid extraction for andrographolide from Andrographis Paniculata. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abubakar, Umar Isah and Chua, Lee Suan and Aziz, Ramlan (2015) Kinetics of green solid-liquid extraction of andrographolide from Andrographis paniculata: effects of particle size and solid-liquid ratio. Green Processing And Synthesis, 4 (5). pp. 399-410. ISSN 2191-9542

Adam, Ahmad 'Akif (2015) Ultrasonic instrumentation system for detecting liquefied petroleum gas level in 14 kilogram cylinders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Adam, M. R. and Othman, M. H. D. and Puteh, M. H. and Pauzan, M. A. B. and Rahman, M. A. and Jaafar, J. (2017) A fabrication of a low-cost zeolite based ceramic membrane via phase inversion and sintering technique. Malaysian Journal of Analytical Sciences, 21 (2). pp. 391-401. ISSN 1394-2506

Adam, Siti Hazirah (2011) Removal of cationic, anionic and non-ionic dyes from aqueous solutions using Durio zibethinus husk. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Adam Ali, O. M. and Ahmad Zaini, M. A. and Mohammed Danlami, J. (2016) Oxidation stability of castor oil in solvent extraction. Jurnal Teknologi, 78 (6). pp. 239-244. ISSN 0127-9696

Adamu, Aliyu and Shamsir, Mohd. Shahir and Abdul Wahab, Roswanira and Parvizpour, Sepideh and Huyop, Fahrul (2016) Multi-template homology-based structural model of L-2-haloacid dehalogenase (DehL) from Rhizobium sp. RC1. Journal of Biomolecular Structure and Dynamics . pp. 1-12. ISSN 0739-1102 (In Press)

Adamu, A. and Wahab, R. A. and Shamsir, M. S. and Aliyu, F. and Huyop, F. (2017) Deciphering the catalytic amino acid residues of L-2-haloacid dehalogenase (DehL) from Rhizobium sp. RC1: An in silico analysis. Computational Biology and Chemistry, 70 . pp. 125-132. ISSN 1476-9271

Adelnia, Hossein and Bidsorkhi, Hossein Cheraghi and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2015) Gas permeability and permselectivity properties of ethylene vinyl acetate/sepiolite mixed matrix membranes. Separation and Purification Technology, 146 . pp. 351-357. ISSN 1383-5866

Adeniran, J. A. and Yusuf, R. O. and Amole, M. O. and Jimoda, L. A. and Sonibare, J. A. (2017) Air quality impact of diesel back-up generators (BUGs) in Nigeria’s mobile telecommunication base transceiver stations (BTS). Management of Environmental Quality: An International Journal, 28 (5). pp. 723-744. ISSN 1477-7835

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Robiah (2012) Cooling of a rectangular microchannel heat sink with ammonia gas. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 57-64. ISSN 0094-243X

Aditya Kiran, S. and Lukka Thuyavan, Y. and Arthanareeswaran, Gangasalam and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2016) Impact of graphene oxide embedded polyethersulfone membranes for the effective treatment of distillery effluent. Chemical Engineering Journal, 286 . pp. 528-537. ISSN 1385-8947

Adnan, Noorazlina (2009) Flame retardancy and mechanical properties of poegmah compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Adnan, Nur Ardawati (2014) Thermal treatment effect on the biochemical composition of honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Adrus, Nadia and Ayuba, Nur Farizah and Ulbricht, Mathias (2014) Poly (N-Isopropylacrylamide) hydrogel networks and sieving characteristics. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 7-10. ISSN 0127-9696

Adrus, Nadia and Rasit Ali, Roshafima and Jamaluddin, Jamarosliza and Ghazali, Siti Khairunisah (2015) Curing behaviour of uv-led curable urethane acrylate coating. In: Malaysia Polymer International Conference 2015 (MPIC 2015), 10-11 Jun, 2015, Putrajaya, Malaysia.

Adrus, Nadia and Ulbricht, Mathias (2012) Molecularly imprinted stimuli-responsive hydrogels for protein recognition. Polymer (United Kingdom), 53 (20). pp. 4359-4366. ISSN 0032-3861

Adrus, Nadia and Ulbricht, Mathias (2013) The rubber elasticity of poly(n-isopropylacrylamide) hydrogel networks. In: Advanced Materials Research.

Adrus, Nadia and Wan Ab. Rahman, Wan Aizan and Abdul Razak, Saiful Izwan and Abdullah Hisham, Nur Syafiqah (2015) Evaluation of polyaniline coated kenaf fiber as conductive fiber in kenaf based paper. In: Malaysia Polymer International Conference, 10-11 Jun, 2015, Putrajaya, Malaysia.

Affandi, Iezzat Emeer (2014) Oil and grease treatment using indigenous bacterial biofilm system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Afshoun, H. R. and Chenar, M. P. and Ismail, A. F. and Matsuura, T. (2017) Effect of support layer on gas permeation properties of composite polymeric membranes. Korean Journal of Chemical Engineering, 34 (12). pp. 3178-3184. ISSN 0256-1115

Aftab, A. and Ismail, A. R. and Ibupoto, Z. H. (2017) Enhancing the rheological properties and shale inhibition behavior of water-based mud using nanosilica, multi-walled carbon nanotube, and graphene nanoplatelet. Egyptian Journal of Petroleum, 26 (2). pp. 291-299. ISSN 1110-0621

Afzali, Afsaneh (2014) Trends and prediction of air pollutants in Pasir Gudang Industrial Area, Johor, Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Agrawal, Pushpa and R., Hema and S., Mahesh Kumar (2006) Experimental investigation on biological hydrogen production using different biomass. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ahmad, Mohd. Haris and Mohd. Jaafar, Mohammad Nazri and Ashrul Ishak, Mohamad Shaiful (2003) Pengaruh nombor pusar ke atas pengurangan emisi NOx dari pembakar berbahan api cecair menggunakan pemusar udara aliran paksi. Jurnal Mekanikal (16). pp. 79-90. ISSN 0127-3396

Ahmad, A. and Khatoon, A. and Mohd-Setapar, S. H. and Kumar, R. and Rafatullah, M. (2016) Chemically oxidized pineapple fruit peel for the biosorption of heavy metals from aqueous solutions. Desalination and Water Treatment, 57 (14). pp. 6432-6442. ISSN 1944-3994

Ahmad, A. and Piang, L. W. (2008) Estimation of fatty acid composition using PLS based model. Journal of Chemical & Natural Resources Engineering, 2 . pp. 59-71. ISSN 1823-5255

Ahmad, Aimi Ana (2011) Treatment of palm oil mill effluent using oil palm fiber filter media enriched with chitosan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Akil M. and Mohd. Setapar, Siti Hamidah and Chuo, Sing Chuong and Khatoon, Asma and Wani, Waseem A. and Kumar, Rajeev and Rafatullah, Mohd. (2015) Recent advances in new generation dye removal technologies: novel search for approaches to reprocess wastewater. RSC Advances, 5 (39). pp. 30801-30818. ISSN 2046-2069

Ahmad, Anisa (1998) Biotransformation of 6-amninopenicillanic acid and 7-aminodesacetoxycephalosporanic acid to ampicillin and cephalexin in batch stirred tank reactor and recirculated packed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Anuar (2012) Analysis of the fuel properties of palm oil waste for gasification. In: International Science Postgraduate Conference 2012 (ISPC 2012), 27-30 Nov 2012, Johor Bahru, Johor.

Ahmad, Arshad and Abd. Hamid, Mohd. Kamaruddin (2001) Neural networks for process monitoring, control and fault detection: Application to Tennessee Eastman Plant. In: Malaysian Science and Technology Congress, 2001, Melaka.

Ahmad, Arshad and Abd. Hamid, Mohd. Kamaruddin (2003) Pipeline leak detection system in a palm oil fractionation plant using artificial neural network. In: International Conference on Chemical and Bioprocess Engineering (ICCBPE 2003), August 2003, Kota Kinabalu.

Ahmad, Arshad and El-Sayed Nasef, Mohamed Mahmoud and Ripin, Adnan and Abdulhamza, Taha Mahdi (2014) State-of-the-art technologies for separation of azeotropic mixtures. Separation and Purification Reviews, 44 (4). pp. 308-330. ISSN 1542-2119

Ahmad, Arshad and Hongyang, Yu and Khan, Faisal and Garaniya, Vikram (2014) Self-organizing map based fault diagnosis technique for non-gaussian processes. IOP Industrial & Engineering Chemistry Research, 53 (21). pp. 8831-8843. ISSN 1520-5045

Ahmad, Arshad and Leong, Wah Heng (2001) Model-based fault detection using hierarchical artificial neural network. In: Regional Symposium on Chemical Enginering, 29-31 October 2001, Bandung.

Ahmad, Arshad and Mahdi, Taha H. and Ripin, Adnan and El-Sayed Nasef, Mohamed Mahmoud (2014) Ultrasonic enhancement of separation azeotropic mixtures via single distillation column. Advanced Materials Research, 909 . pp. 83-87. ISSN 1022-6680

Ahmad, Arshad and Ripin, Adnan and El-Sayed Nasef, Mohamed Mahmoud and Abdulhamza, Taha Mahdi (2014) Simulation and analysis of process behavior of ultrasonic distillation system for separation azeotropic mixtures. Applied Mechanics and Materials, 625 . pp. 677-679. ISSN 1660-9336

Ahmad, Arshad and Yeoh, Phooi Ling and W. Ali, Mohamad and Ripin, Adnan and Haron, Saharudin (2013) Human factor in equipment safety of hard disk manufacturing. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 9-14. ISSN 0127-9696

Ahmad, Arshad and Abd. Hamid, Mohd. Kamaruddin (2002) Detection of multiple sensor faults in a palm oil fractionation plant using artificial neural network. In: Regional Symposium on Chemical Engineering in conjunction with Symposium of Malaysian Chemical Engineers, June 2002, Petaling Jaya.

Ahmad, Arshad and Abd. Hamid, Mohd. Kamaruddin (2002) Detection of sensor failure in a palm oil fractionation plant using artificial neural network. In: International Conference on Artificial Intelligence Applications in Engineering and Technology ICAIET 2002, 17-18 June 2002, Kota Kinabalu.

Ahmad, Kamarudin (2004) Improvement of a tropical residual soil by electrokinetic process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, M. M. and Alwi, S. R. W. and Jamaludin, R. and Chua, L. S. and Mustaffa, A. A. (2017) Quantitative structure-Activity relationship model for antioxidant activity of flavonoid compounds in traditional Chinese herbs. Chemical Engineering Transactions, 56 . pp. 1039-1044. ISSN 2283-9216

Ahmad, M. S. and Mohamad, Z. and Ratnam, C. T. and Rudin, A. K. (2016) Tensile properties and morphology of irradiated EVA/ENR-50/sepiolite nanocomposites. In: 24th Scientific Conference of the Microscopy Society Malaysia, SCMSM 2015, 2-4 Dec 2015, Melaka, Malaysia.

Ahmad, M. Z. and Hashim, H. and Yunus, N. A. (2016) Solvent design for post combustion chemical absorption process. In: Computer Aided Chemical Engineering. Elsevier B.V., pp. 1683-1688. ISBN 978-044463428-3

Ahmad, Mazatusziha and Wahit, Mat Uzir and Abdul Kadir, Mohamed Rafiq and Mohd. Dahlan, Khairul Zaman (2011) Influence of processing aids and hydroxypatite as fillers on flow behaviour and mechanical properties of ultra high molecular weight polyethylene/high density polyethylene composites. Key Engineering Materials, 471-47 . pp. 827-832. ISSN 1013-9826

Ahmad, Mohd. Azlan (2016) Anaerobic digestion of crude glycerol for biohydrogen production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Mohd. Shahrulnizam (2015) Characterization of irradiated epoxidized natural rubber/polyvinyl chloride/carbon nanotubes nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmad, Mohd. Shahrulnizam and Ratnam, Chantara Thevy and Mohamad, Zurina and Rozaki, Nur Zahida (2015) Electron beam irradiation of ENR-50/PVC/CNTs nanocomposites: effect of sonication. In: Malaysian Polymer International Conference 2015, 10-11 Jun, 2015, Kuala Lumpur, Malaysia.

Ahmad, Muhammad Akmal (2016) Preparation and characterization of polylactic acid / modified rock stone / strach biocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Nor Azimah (2015) Nickel removal from electroless wastewater by using coagulation flocculation and ion exchange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmad, Nor Azimah and Abu Hassan, Mohd. Ariffin and Zainon Noor, Zainura and Mohammed Evuti, Abdullahi and Mohammed Danlami, Jibrin (2014) Optimization of nickel removal from electroless plating industry wastewater using response surface methodology. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 33-40. ISSN 2180-3722

Ahmad, Norhayati and Idris, Mohd. Hasbullah and Moslemi, Navid and Farahany, Saeed and Ghandvar, Hamidreza (2015) Evaluation of the effect of sicp ratio on microstructural and dry sliding wear behavior of a356/xsicp composites. In: 4th International Conference on Advanced Manufacturing Technology, 18-20 Dec, 2015, United States.

Ahmad, Rabiatul Adawiyah and Sayid Abdullah, Sharifah H. A. and Serati-Nouri, Hamed and Abd. Majid, Fadzilah Adibah and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2014) Antiproliferative activity of coumarin and cinnamon water extracts on human ovarian cancer cells. Latin American Journal of Pharmacy, 33 (6). pp. 960-965. ISSN 0326-2383

Ahmad, S. I. and Hashim, H. and Hassim, M. H. (2016) A graphical method for assessing inherent safety during research and development phase of process design. Journal of Loss Prevention in the Process Industries, 42 . pp. 59-69. ISSN 0950-4230

Ahmad, S. I. and Hashim, H. and Hassim, M. H. (2017) Inherent safety assessment technique for preliminary design stage. Chemical Engineering Transactions, 56 . pp. 1345-1350. ISSN 2283-9216

Ahmad, S. I. and Hashim, H. and Hassim, M. H. and Muis, Z. A. (2016) Inherent safety assessment of biodiesel production: flammability parameter. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Ahmad, S. H. and Jamil, S. M. and Othman, M. H. D. and Rahman, M. A. and Jaafar, J. and Ismail, A. F. (2017) Co-extruded dual-layer hollow fiber with different electrolyte structure for a high temperature micro-tubular solid oxide fuel cell. International Journal of Hydrogen Energy, 42 (14). pp. 9116-9124. ISSN 0360-3199

Ahmad, Siti Halimah (2016) Structural study of co-extruded dual-layer hollow fibre for micro-tubular solid oxide fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmad, Siti Nur Sakinah (2009) Study of stepped lap repairs for composite materials applicable to sheet moulding compound water tank panels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ahmad, Syaza I. and Hashim, Haslenda and Hassim, Mimi Haryani and Abu Muis, Zarina (2015) Inherent safety assessment technique for separation equipment in preliminary engineering stage. Chemical Engineering Transactions, 45 . pp. 1123-1128. ISSN 2283-9216

Ahmad, Syaza Izyanni (2017) Inherent safety assessment framework for process design using numerical and graphical techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Ahmad, Syaza Izyanni and Hashim, Haslenda and Hassim, Mimi Haryani (2015) Inherent safety assessment of separation equipment in preliminary engineering phase. In: The 18th Conference of Process Integration, Modelling And Optimisation for Energy Saving and Pollution Reduction 2015 (PRES 2015), 22-27 Aug, 2015, Sarawak, Malaysia.

Ahmad, Syaza Izyanni and Hashim, Haslenda and Hassim, Mimi Haryani and Asli, Umi Aisah (2015) I-Grand method for graphical and numerical based technique for inherent safety assessment. In: 4th Conference on Emerging Energy and Process Technology 2015 (CONCEPT 2015), 15-16 Dec, 2015, Melaka, Malaysia.

Ahmad, Umi Kalthom and Singh, Jagjit (2003) Forensic analysis of shoe polish stains on several fabrics. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ahmad, Umi Kalthom and Wong, Jun Wei and Ibrahim, Roliana (2012) Analysis of household water-based paints for forensic purposes [analiza porównawcza próbek farb stosowanych w gospodarstwach domowych]. Z Zagadnien Nauk Sadowych, 91 . pp. 185-194. ISSN 1230-7483

Ahmad, Wan Azlina and Zakaria, Zainul Akmar and Razali, Firdausi and Samin, Jefri (2009) Evaluation of the combined Cr(VI) removal capacity of sawdust and sawdust-immobilized acinetobacter haemolyticus supplied with brown sugar. Water, Air, and Soil Pollution, 204 (1-4). pp. 195-203. ISSN 0049-6979

Ahmad, Z. and Sarmidi, M. R. and Hasham, R. (2017) Evaluation of wound closure activity of cocos nucifera oil on scratched monolayer of human dermal fibroblasts. Chemical Engineering Transactions, 56 . pp. 1657-1662. ISSN 2283-9216

Ahmad, Zunairah and Hasham @ Hisam, Rosnani and Aman Nor, Nor Farahiyah and Sarmidi, Mohamad Roji (2015) Physico-chemical and antioxidant analysis of virgin coconut oil using West African tall variety. In: Journal of Advanced Research in Materials Science, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Ahmad Junaidi, Norhafizah and Suwa, Tohru (2015) Solar-powered adsorption refrigeration cycle optimization. In: 2015 Advanced Research in Electrical and Electronic Engineering Technology, 24-26 Nov, 2015, Indonesia.

Ahmad Kamal, Qistina (2013) Production of itaconic acid from palm oil mill effluent (POME) using Aspergillus Terreus nrrl 1960 immobilized in PVA-alginate sulfate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Khairuddin, N. B. and Wahab, H. A. and Samian, M. R. and Najimudin, N. (2008) Structure prediction on large protein using the combination of knowledge based and physics based approaches method validation on cholesterol esterase. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp ed.). pp. 141-154. ISSN 1823-5255

Ahmad Khairuddin, Nurulbahiyah and Mohamed Tap, Fatahiya and Ishak, Ameera and Hussam, Ragheed (2012) Molecular dynamics folding simulation of β-hairpins from protein G. In: International Conference on Biomedical Engineering (ICoBE 2012), 27-28 Feb 2012, Bayview Beach Resort, Penang.

Ahmad Khairudin, N. B. and Wahab, H. A. and Samian, M. R. and Najimudin, N. (2008) The effects of gas phase on the protein conformation a molecular dynamics study on Eotaxin-3 Cytokine. Journal of Chemical and Natural Resources Engineering - Modeling Innovation, 2 (Sp ed.). pp. 18-28. ISSN 1823-5255

Ahmad Khairudin, Nurulbahiyah and A. Wahab, Habibah (2011) A new approach in protein folding studies revealed the protential site for nucleation center. In: International Conference On Bioinformatics, Computational And Systems Biology (ICBCSB 2011).

Ahmad Khairudin, Nurulbahiyah and A. Wahab, Habibah (2011) Protein structure prediction using gas phase molecular dynamics simulation : eotaxin-3 cytokine as a case study. In: International Conference On Mathematical And Computational Biology 2011 (ICMCB 2011).

Ahmad Mutamim, Noor Sabrina and Zainon Noor, Zainura and Abu Hassan, Mohd. Ariffin and Olsson, Gustaf (2012) Application of membrane bioreactor technology in treating high strength industrial wastewater: a performance review. Desalination, 305 . pp. 1-11. ISSN 0011-9164

Ahmad Nasir, Izzah Athirah and Alis, Adilah and Mohamad, Zurina and A. Majid, Rohah (2016) Rigid polyurethane foam-based palm oil polyol/polyepropylene glycol blend. In: International of Global Network for Innovative Technology (IGNITE 2016), 27-29 Jan, 2016, Pulau Pinang, Malaysia.

Ahmad Nasir, Nor Atikah Husna (2013) Immobilisation of phanerochaete chrysosporium in PVA-Alginate-sulphate beads for decolourization of textile effluents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Ahmad Pauzi, Safwan (2011) A cullet-kaolin ceramic from recycle glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Rifa’I, Aqilah (2017) Effect of reaction temperatures on synthesis of poly(acrylamide-co-acrylic acid) grafted poly(styrene-co- methyl methacrylate) microgels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmad Rusmili, Siti Haslina (2014) Nanosized sodalite as support for titanium and zinc oxides in photocatalytic conversion of n-hexane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Sharif, Noor Fadzliana and Abd. Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan (2014) Cassava leaves as packaging materials. Cellulose Chemistry and Technology, 48 (6). p. 590. ISSN 0576-9787

Ahmad Zaini, Muhammad Abbas and Amano, Yoshimasa and Machida, Motoi (2010) Adsorption of heavy metals onto activated carbons derived from polyacrylonitrile fiber. Journal of Hazardous Materials, 180 (1-3). 552 - 560. ISSN 0304-3894

Ahmad Zaini, Muhammad Abbas and Takayuki, Watanabe and Yoshimasa, Amano and Motoi, Machida (2014) Removal of 2-methylisoborneol from aqueous solution by cattle manure compost (CMC) derived activated carbons. Journal of Water Supply Research and Technology-Aqua, 63 (4). pp. 239-247. ISSN 0003-7214

Ahmad Zaini, Muhammad Abbas and Ting, Chiew Ngiik and Kamaruddin, Mohd. Johari and Mohd. Setapar, Siti Hamidah and Che Yunus, Mohd. Azizi (2014) Zinc chloride-activated waste carbon powder for decolourization of methylene blue. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 37-44. ISSN 0127-9696

Ahmad Zaini, Muhammad Abbas and Wong, Lily Chai Li and Kamaruddin, Mohd. Johari and Mohd. Setapar, Siti Hamidah and Che Yunus, Mohd. Azizi (2014) Irradiated water-activated waste tyre powder for decolourization of reactive orange 16. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 95-100. ISSN 2180-3722

Ahmad, A. L. and Mariadas, A. and Zulkali, M. M. D. (2004) Reduction of membrane fouling using a helical baffle for cross flow microfiltration. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia. (Unpublished)

Ahmad, A. L. and Ooi, B. S. and Zulkali, M. M. D. and Choudhury, J. P. (2004) Characteristic Of Co-Polyamide Nanofiltration Membrane : Effect Of Reaction Time. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ahmad, Mazatusziha and Hassan, Azman and Rahmat, Abdul Razak (2004) Mechanical Properties of Rice Husk Filled Impact Modified PVC-U Composite. In: Malaysian Chemical Congress 2004 (MCC 2004), 27-29 September 2004, Sunway Pyramid Convention Centre, Petaling Jaya.. (Unpublished)

Ahmada, M. Z. and Hashim, H. and Yunusa, N. A. and Lima, J. S. and Hoa, W. S. and Siong, H. C. (2017) A physical absorption assessment of a new alternative solvent for carbon capture. Chemical Engineering Transactions, 56 . pp. 625-630. ISSN 2283-9216

Ahmed, Amal Gasim (1998) Flavour volatile constituents and the roasting of selected spices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmed, Iqbal and Kormin, Faridah and Idris, Ani and Mohd. Yunus, Rosli and Hassan, Zulkafli and Prasad, Reddy (2010) Preparation of PES ultrafiltration membrane using novel modified microwave casting solution technique. Journal of Applied Sciences, 10 (21). 2733 -2736. ISSN 1812-5654

Ahmed, Ishtiaque and Abdulameer, Ahmed Z. and Puan, Othman Che and Minhans, Anil (2014) Trip generation at fast–food restaurants in Johor Bahru, Malaysia. Jurnal Teknologi, 70 (4). pp. 91-95. ISSN 0127-9696

Ahmed, Ishtiaque and Ramli, Izzul and Hainin, Mohd. Rosli (2014) Parking generation by "pharmacy" land use type in Johor Bahru, Malaysia. Jurnal Teknologi (Sciences and Engineering), 69 (2). pp. 23-26. ISSN 2180-3722

Ahmed, Israil (1998) Innovative technique of separating commingled thermoplastics to enhance materials recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmed, Kamal and Shahid, Shamsuddin and Harun, Sobri and Wang, Xiao Jun (2016) Characterization of seasonal droughts in Balochistan Province, Pakistan. Stochastic Environmental Research and Risk Assessment, 30 (2). pp. 747-762. ISSN 1436-3240

Ahmed, Nor Rashidah (2016) Optimization of extraction and spray drying parameters on ficus deltoidea extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmed, Saeed Isa and Johari, Anwar and Hashim, Haslenda and Mat, Ramli and Lim, Jeng Shiun and Jusoh, Mazura and Alkali, Habib and Hafshar, Siti Shamsi (2015) Optimization approach for greenhouse gas to green energy for a low carbon region of Iskandar Malaysia. Jurnal Teknologi, 75 (6). pp. 7-16. ISSN 2180-3722

Ahmed, Sayed M. and Al-Dosari, Mohammad A. and Al-Mouallimi, Nadia and Kamal, Hussein M. and Mohamed, Wael S. and Elmarzugi, Nagib Ali (2015) ZnO coated nanoparticles based on acrylic copolymer for protecting historic calcareous stone monuments. In: Seventh International Conference on Nano-Technology in Construction, 27-31 March, 2015, Egypt.

Ahmed Muherei, Mazen and Junin, Radzuan (2009) Equilibrium adsorption isotherms of anionic, nonionic surfactants and their mixtures to shale and sandstone. Modern Applied Science, 3 (2). pp. 158-167. ISSN 1913-1844 (Print); 1913-1852 (Electronic)

Ahmed Muherei, Mazen and Junin, Radzuan (2008) Mixing effect of anionic and nonionic surfactants on micellization, adsorption and partitioning of nonionic surfactant. Modern applied science, 2 (3).

Ahmed Salahudeen, Shafaat and Rahmat, Abdul Razak (2015) Design parameter to develop secondary flow in twin screw extruder. In: Applied Mechanics and Materials, 22-26 Sept, 2015, Kuala Lumpur, Malaysia.

AI-Amin, Abul Quasem and Alam, Gazi Mahabubul and Yap, Su Fei and Mohammad Azam, Nurul and Karim, Yousif Osman (2015) Price and trade mechanism for palm and soybean oils: a comparative analysis of economic development between Asia and contemporary world. Asian Journal of Agricultural Research, 9 (1). pp. 1-11. ISSN 1819-1894

Ajchariyapagorn, Araya and Douglas, Supaporn and Douglas, Peter L. and Pongamphai, Suwassa (2006) Simulation of safe processes using aspen plus: an economic evaluation. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Akbari, A. and Tehrani, M. A. and Cherghibidsorkhi, H. (2014) Polysterene layered silicate nanocomposites. In: Handbook of Polymernanocomposites. Processing, Performance and Application: Volume A: Layered Silicates. Springer Berlin Heidelberg, pp. 205-221. ISBN 978-364238649-7

Akbari, Abozar and Jawaid, M. and Hassan, Azman and Balakrishnan, Harintharavimal (2014) Epoxidized natural rubber toughened polylactic acid/talc composites: mechanical, thermal, and morphological properties. Journal of Composite Materials, 48 (7). pp. 769-781. ISSN 1530-793X

Akbari, Elnaz and Yusof, Rubiyah and Ahmadi, Mohammad Taghi and Enzevaee, Aria and Kiani, Mohammad Javad and Karimi, Hediyeh and Rahmani, Meisam (2014) Bilayer graphene application on NO2 sensor modelling. Journal of Nanomaterials . ISSN 1687-4110

Akbari, Saeed (2011) Estimating Asphaltene precipitation in the presence of co2 injection in oil reservoirs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Akbari, Vahid and Borhani, Tohid Nejad Ghaffar and Aramesh, Roya and Abd. Hamid, Mohd. Kamaruddin and Shamiri, Ahmad and Hussain, Mohamed Azlan (2015) Evaluation of hydrodynamic behavior of the perforated gas distributor of industrial gas phase polymerization reactor using CFD-PBM coupled model. Computers and Chemical Engineering, 82 . pp. 344-361. ISSN 0098-1354

Akbari, Vahid and Borhani, Tohid Nejad Ghaffar and Shamiri, Ahmad and Mohd. Abd. Hamid, Kamaruddin (2015) A CFD-PBM coupled model of hydrodynamics and mixing/segregation in an industrial gas-phase polymerization reactor. Chemical Engineering Research and Design, 96 . pp. 103-120. ISSN 0263-8762

Akbarivakilabadi, Abozar (2010) Effect of epoxidized natural rubber on mechanical, thermal and morphological properties of polylactid/talc composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Akhondzadeh, Hamed and Fattahi, Ali and Zare, Ali Reza and Derahman, Mohd. Nawi and Idriss, Ahmad Kamal (2012) Promising approaches to enhance SAGD performance in uneconomical tar-sands. In: Society of Petroleum Engineers - North Africa Technical Conference and Exhibition 2012, NATC 2012: Managing Hydrocarbon Resources in a Changing Environment. Society of Petroleum Engineers, Texas, pp. 1104-1111. ISBN 978-162276050-3

Akhtar, J. and Amin, N. S. and Hayyat, U. (2017) Effectiveness of granular activated carbon for removal of sulfamethoxazole during ozonation. Chiang Mai Journal of Science, 44 (3). pp. 1040-1048. ISSN 0125-2526

Akhtar, J. and Idris, A. (2017) Oil palm empty fruit bunches a promising substrate for succinic acid production via simultaneous saccharification and fermentation. Renewable Energy, 114 . pp. 917-923. ISSN 0960-1481

Akhtar, J. and Imran, M. and Zahoor, M. K. and Amin, N. S. (2016) Granular activated carbon assisted ozonation of cephalexin antibiotic. Journal of the Chemical Society of Pakistan, 38 (6). pp. 1056-1063. ISSN 0253-5106

Akhtar, Javaid and Saidina Amin, Nor Aishah (2012) A review on operating parameters for optimum liquid oil yield in biomass pyrolysis. Renewable and Sustainable Energy Reviews, 16 (7). pp. 5101-5109. ISSN 1364-0321

Akhtar, Javaid and Saidina Amin, Nor Aishah and Aris, Azmi (2011) Combined adsorption and catalytic ozonation for removal of sulfamethoxazole using fe2o3/ ceo2 loadeed activated carbon. Chemical Engineering Journal, 170 (1). pp. 136-144. ISSN 1385-8947

Akhtar, Javaid and Soo, Kim Kuang and Saidina Amin, NorAishah (2009) Catalyzed liquefaction of empty palm fruit bunch (EPFB) in sub-critical water. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Akhtar, Junaid and Chee, Loong Teo and Long, Wee Lai and Hassan, Nursia and Idris, Ani and Abd. Aziz, Ramlan (2015) Factors affecting delignification of oil palm empty fruit bunch by microwave-assisted dilute acid/alkali pretreatment. BioResources, 10 (1). pp. 588-596. ISSN 1930-2126

Al Hamdani, Y. and Hassim, M. H. and Salim, S. M. (2017) Occupational health risk assessment and control of fugitive emissions in chemical processes. Chemical Engineering Transactions, 56 . pp. 817-822. ISSN 2283-9216

Al-Fakih, Abdo Mohammed Ali (2017) Experimental and computational studies of furan derivatives in corrosion inhibition of mild steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Al-Haddad, Ahmad Yaser (2013) Development of multiplexed microcontroller based system for microbioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al-Jumaily, Amer Ali Saoud (1999) Hydrogen absorption and desorption characteristics of ferro titanium manganese alloy as hydrogen storage media using new metal hydride test system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Al-Khateeb, Ismail K. and Flaih, Hanan H. and Al-Marsomi, Sabri (2006) Polarization functions of Pb-Sn-Cd alloys treated with sulfuric acid. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Al-Muraisy, S. A. A. and Ali, N. and Hassan, O. and Sabeen, A. H. (2017) Alkali pretreatment and acid hydrolysis of oil palm mesocarp fiber (OPMF) to produce glucose. Advanced Science Letters, 23 (9). pp. 8832-8836. ISSN 1936-6612

Al-Shanini, Ali and Ahmad, Arshad and Khan, Faisal (2014) Accident modelling and analysis in process industries. Journal of Loss Prevention in the Process Industries, 32 . pp. 319-334. ISSN 0950-4230

Al-shanini, Ali and Ahmad, Arshad and Khan, Faisal and Hassim, Mimi and Al-shatri, Ali (2015) Modeling the impact of natural and security hazards in an LNG processing facility. Jurnal Teknologi, 75 (6). pp. 17-25. ISSN 2180-3722

Al-shanini, Ali and Ahmad, Arshad and Khan, Faisal and Oladokun, Olagoke and Mohd. Nor, Shadiah Husna (2015) Alternative prediction models for data scarce environment. Computer Aided Chemical Engineering, 37 . pp. 665-670. ISSN 1570-7946

Al-shanini, Ali Hassan Ali (2015) Comprehensive quantitative dynamic accident modelling framework for chemical plants. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Al-Turaihi, Riyadh S. and Hussein, Ahmed Kadhim and Al-Kayiem, Hussain H. and Mohammed, H. A. (2013) Experimental investigation of various solid particle materials on the steady state gas-solid fluidized bed system. Journal of Basic and Applied Scientific Research, 3 (7). pp. 293-304. ISSN 2090-4304

Alam, Md. Zahangir and Abd. Karim, M. Ismail and Hamisan, Ahmad Fadhlan and Jamal, Parveen and Jalal, K.C.A. (2006) Liquid state bioconversion of palm oil mill effluent for cellulase production: statistical optimization of process conditions. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Alexander, Jock Asanja and Ahmad Zaini, Muhammad Abbas and Abdulsalam, Surajudeen and El-Nafaty, Usman Aliyu and Aroke, Umar Omeiza (2016) Physicochemical characteristics of surface modified Dijah-Monkin bentonite. Particulate Science and Technology . pp. 1-11. ISSN 0272-6351 (In Press)

Alexander, J. A. and Ahmad Zaini, M. A. and Surajudeen, A. and Aliyu, E. N. U. and Omeiza, A. U. (2017) Insight into kinetics and thermodynamics properties of multicomponent lead(II), cadmium(II) and manganese(II) adsorption onto Dijah-Monkin bentonite clay. Particulate Science and Technology . pp. 1-9. ISSN 0272-6351 (In Press)

Alhamdani, Y. A. and Hassim, M. H. and Ng, R. T. L. and Hurme, M. (2017) The estimation of fugitive gas emissions from hydrogen production by natural gas steam reforming. International Journal of Hydrogen Energy, 42 (14). pp. 9342-9351. ISSN 0360-3199

Ali, Abdul Kun (2016) Al-Makassari's (1626-1699) thought on Al-Insan Al-Kamil in 17th century. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Ali, Asmadi and Mohd. Yunus, Rosli and Awang, Mohamad and Che Yunus, Mohd. Azizi (2015) Influence of hydrophilic polymer on proteins separation, molecular weight cut-off (MWCO) and average pore size of polysulfone blend membrane. Jurnal Teknologi, 74 (7). pp. 53-56. ISSN 2180-3722

Ali, Asmadi and Mohd. Yunus, Rosli and Awang, Mohamad and Mat, Ramli (2014) The effects of evaporation time on morphological structure of polysulfone/cellulose acetate phthalate/polyvinylpyrrolidone (PSf/CAP/PVP) blend membranes. Applied Mechanics and Materials, 19 (1). pp. 251-270. ISSN 1360-2357

Ali, Esfandiari Bayat and Rajaei, Kourosh and Junin, Radzuan (2016) Assessing the effects of nanoparticle type and concentration on the stability of CO2 foams and the performance in enhanced oil recovery. Colloids and Surface A: Physicochemical and Engineering Aspects, 511 . pp. 222-231. ISSN 0927-7757

Ali, Fattahi and Hamed, Akhondzadeh and Derahman, Mohd. Nawi and Yunan, Mat Hussin and Soheil, Namazi (2012) Impact of reservoir heterogeneity on steam assisted gravity drainage in heavy oil fractured reservoirs. Energy Exploration and Exploitation, 30 (4). pp. 553-566. ISSN 0144-5987

Ali, M. Abbas and Sayeed, M. Abu and Alam, M. Shahinur and Yeasmin, Mst. Sarmina and Mohal Khan, Astaq and Muhamad, Ida Idayu (2012) Characteristics of oils and nutrient contents of nigella sativa linn. and trigonella foenum-graecum seeds. Bulletin Of The Chemical Society Of Ethiopia, 26 (1). pp. 55-64. ISSN 1011-3924

Ali, Md. Abbas and Sayeed, Md. Abu and Ghosh, Sandip Kumar and Yeasmin, Sarmina and Khan, Astaq Mohal and Abdul Majid, Fadzilah Adibah (2011) Comparative study of the characteristics of seed oil and seed nutrient content of three varieties of cucumis sativus l. Pakistan Journal of Scientific and Industrial Research, 54 (2). pp. 68-74. ISSN 0309-0885

Ali, Md. Imtiaj and Schneider, Philip A. (2006) Development and commissioning of controlled struvite crystallization in pilot scale. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ali, Md. Imtiaj and Schneider, Philip A. (2006) Modelling of struvite chemistry. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ali, Mohamed Abbas and Mesran, Hadi and Abd. Latip, R. and Othman, Nor Hidayu and Nik Mahmood, Nik Azmi (2016) Effect of microwave heating with different exposure times on the degradation of corn oil. International Food Research Journal, 23 (2). pp. 842-848. ISSN 1985-4668

Ali, N. S. M. and Yusof, K. M. (2017) Fuzzy logic model development for troubleshooting at degumming and bleaching process. Chemical Engineering Transactions, 56 . pp. 859-864. ISSN 2283-9216

Ali, Noorhalieza and Che Aziz, Che Afifi and Hassan, Onn (2015) Alkali pretreatment and acid hydrolysis of coconut pulp and empty fruit bunch to produce glucose. Jurnal Teknologi, 74 (7). pp. 7-11. ISSN 1279-696

Ali, Nurain (2014) The dermatoxicological profile of Labisia pumila extract for cosmetic application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ali, R. R. and Rahman, W. A. W. A. and Ibrahim, N. B. and Kasmani, R. M. (2013) Starch-based biofilms for green packaging. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 347-354. ISBN 978-146146208-8

Ali, Roshafima Rasit (2015) Low density polyethylene tapioca starch degradable biofilms with palm oil based processing aid for blown film extrusion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ali, Susiwi M. W. and Ripin, Adnan and Ahmad, Arshad (2010) Adsorption of heavy metal from recovered base oil using zeolite. Journal of Applied Sciences, 10 (21). 2688 - 2691. ISSN 8125654

Ali, Umar and Abd. Karim, Khairil J. and Buang, Nor A. (2016) Modification of pristine multiwalled carbon nanotube by grafting with poly(methyl methacrylate) using benzoyl peroxide initiator. Journal of Applied Polymer Science, 133 (14). pp. 1-6.

Ali, Umar and Abd. Karim, Khairil Juhanni and Buang, Nor Aziah (2015) A review of the properties and applications of poly (Methyl Methacrylate) (PMMA). Polymer Reviews, 55 (4). pp. 678-705. ISSN 1558-3724

Ali @ Mahmud, Asmadi (2000) Direct conversion of methane to liquid hydrocarbons over Ga-HZSM-5 zeolite catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali Badaruddin, Ila Najaa (2014) Preparation and properties of poly(acrylamide)-grafted-kenaf fiber biodegradable hydrogel with slow release urea fertilizer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ali Mohsin, Mohammed Ehtesham (2014) Influence of montmorillonite as secondary filler on the properties of carbon nanotube / high density polyethylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali Mohsin, Muhammad E. and Arsad, Agus and Fouad, Hassan and Jawaid, Mohammad and Alothman, Othman Y. (2014) Enhanced mechanical and thermal properties of CNT/HDPE nanocomposite using MMT as secondary filler. Times of Polymers (TOP) and Composites 2014, 1599 . pp. 206-209. ISSN 1551-7616

Ali Mohsin, Muhammad E. and Arsad, Agus and Gulrez, Syed K. H. and Muhamad, Zurina and Fouad, Hassan and Alothman, Othman Y. (2015) Enhanced dispersion of carbon nanotubes in high density polyethylene matrix using secondary nanofiller and compatibilizer. Fibers and Polymers, 16 (1). pp. 129-137. ISSN 1229-9197

Ali Sidahmed, Heyam Mohamed and Mohd. Hashim, Najihah and Mohan, Syam Morali and Abdelwahab, Siddig Ibrahim and Taha, Manal Mohamed Elhassan and Dehghan, Firouzeh and Yahayu, Maizatulakmal Akmal and Cheng, Gwendoline Lian Ee and Loke, Mun Fai and Vadivelu, Jamuna (2016) Evidence of the gastroprotective and anti-helicobacter pylori activities of β-mangostin isolated from Cratoxylum arborescens (Vahl) blume. Drug Design, Development and Therapy, 10 . pp. 297-313. ISSN 1177-8881

Ali, Nora'aini and Mohammad, Abdul Wahab (2004) The Development Of Predictive Modeling Of Nanofiltration Membrane Properties : A Review. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Alias, H. and Ani, M .F. C. (2017) Thermal characteristic of nanofluids containing titanium dioxide nanoparticles in ethylene glycol. Chemical Engineering Transactions, 56 . pp. 1459-1464. ISSN 2283-9216

Alias, N. and Kamaruddin, M. J. and Zaini, M. A. A. (2017) Dielectric properties of sodium hydroxide-impregnated and activated cempedak peel samples at microwave frequencies. Chemical Engineering Transactions, 56 . pp. 931-936. ISSN 2283-9216

Alias, N. H. and Kamarudin, Khairul Sozana Nor and Bhatti, I. (2010) CO2 separation using modified MCM-41 in PSA. International Journal of Chemical and Environmental Engineering, 1 (2). pp. 85-90. ISSN 2078-0737

Alias, Nadiawati (2007) Cloning and expression of endochitinase gene from trichoderma virens UKM-1 IN Escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Alias, Noor Izawati and Mahadi, N. M. and Murad, A. M. A. and Bakar, F. D. A. and Rabu, A. and Illias, R. M. (2011) Expression optimisation of recombinantα-l-arabinofuranosidase from aspergillus niger ATCC 120120 in pichia pastoris and its biochemical characterisation. African Journal of Biotechnology, 10 (35). pp. 6700-6710. ISSN 1684-5315

Alias, Norulaina and Ahmad Zaini, Muhammad Abbas and Kamaruddin, Mohd. Johari and You, Kok Yeow (2017) Dielectric properties of potassium carbonate-impregnated cempedak peel for microwave-assisted activation. Asia-Pacific Journal of Chemical Engineering, 12 (1). pp. 173-181. ISSN 1932-2135

Alir, Afizah and Johari, Anwar and Tuan Abdullah, Tuan Amran and Kamaruddin, Mohd. Johari (2015) Characterization of the fuel properties of ananas comosus leaf for thermal application. In: International Conference on Fuel Cell and Hydrogen Technology (ICFCHT) 2015, 1-3 Sept, 2015, Kuala Lumpur, Malaysia.

Aliyu Bello, A. and Ahmad, Arshad and Ripin, Adnan and Oladokun, Olagoke (2016) Numerical estimation of moisture content in spray dried juice powder. Jurnal Teknologi, 78 (8-3). pp. 65-70. ISSN 0127-9696

Alizadeh, Abdolhamid and Khodaei, Mohammad M. and Kanjouri, Tayyebeh and Shamsuddin, Mustaffa (2015) Electro-generated ortho-quinoide intermediates: templates for feasible construction of a series of novel imidazo[2,1-b]thiazole derivatives through one-pot five-step domino hetero-annulation process. Research on Chemical Intermediates, 41 (9). pp. 6185-6197. ISSN 1568-5675

Alizadeh, Mostafa (2017) Prediction of fracture dip using artificial neural networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Alizadeh, Mostafa and Junin, Radzuan and Mohsin, Rahmat and Movahed, Zohreh and Alizadeh, Mehdi and Alizadeh, Mohsen (2015) Application of artificial neural networks in fracture characterization and modeling technology. In: 17th International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE '15), 23-25 April, 2015, Kuala Lumpur, Malaysia.

Alizadeh, Mostafa and Movahed, Zohreh and Junin, Radzuan and Mohsin, Rahmat and Alizadeh, Mehdi and Alizadeh, Mohsen (2015) Fracture modeling in oil and gas reservoirs using image logs data and petrel software. Jurnal Teknologi, 75 (11). pp. 25-32. ISSN 2180-3722

Alizadeh, Mostafa and Movahed, Zohreh and Junin, Radzuan and Wan Sulaiman, Wan Rosli and Jaafar, Mohd. Zaidi (2014) Fault interpretation using image logs. In: Applied Mechanics and Materials, 16 Nov, 2014, Kuala Lumpur, Malaysia.

Almaki, Javad Hamzehalipour and Nasiri, Rozita and Idris, Ani and Abdul Majid, Fadzilah Adibah and Salouti, Mojtaba and Wong, Tet Soon and Dabagh, Shadab and Marvibaigi, Mohsen and Amini, Neda (2016) Synthesis, characterization and in vitro evaluation of exquisite targeting SPIONs-PEG-HER in HER2+ human breast cancer cells. Nanotechnology, 27 (10). ISSN 0957-4484

Almasi, D. and Sadeghi, M. and Lau, W. J. and Roozbahani, F. and Iqbal, N. (2016) Functionally graded polymeric materials: a brif review of current fabrication methods and introduction of a novel fabrication method. Materials Science and Engineering C, 64 . pp. 102-107. ISSN 0928-4931

Alsagayar, Zyad Salem and Rahmat, Abdul Razak and Arsad, Agus and Fakhari, Alireza and Khalili, Amirali (2014) Characterization and mechanical properties of epoxidized palm oil/epoxy resin blend. In: Advanced Materials Research, International Conference Global Sustainability and Chemical Engineering (ICGSCE), August 20-22, 2014, Kuala Lumpur, Malaysia, 20-22 Aug, 2014, Kuala Lumpur, Malaysia.

Alsagayar, Zyad Salem and Rahmat, Abdul Razak and Arsad, Agus and Fakhari, Alireza and Wan Tajulruddin, Wan Nurhayati (2015) Mechanical properties of epoxidized palm oil / epoxy resin blend. In: Applied Mechanics and Materials World Virtual Conference on Advanced Research In Materials And Engineering Applications, September 22-26, 2014, Kuala Lumpur, Malaysia, 2015.

Alsagayar, Zyad Salem and Rahmat, Abdul Razak and Arsad, Agus and Mustapha, Siti Noor Hidayah (2015) Tensile and flexural properties of montmorillonite nanoclay reinforced epoxy resin composites. In: Advanced Materials Research, 2015.

Alsobaai, Ahmed Mubarak and Bassim, H. Hameed and Ridzuan, Zakaria (2006) Hydrocracking of gas oil using USY-zeolite-based catalyst. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Altaee, A. and Ismail, A. F. and Sharif, A. and Zaragoza, G. (2016) Dual stage PRO process: impact of the membrane materials of the process performance. Desalination and Water Treatment, 57 (14). pp. 6172-6183. ISSN 1944-3994

Altaee, A. and Ismail, A. F. and Sharif, A. and Zaragoza, G. and Carvalho, P. C. (2016) Two-stage FO-BWRO/NF treatment of saline waters. Desalination and Water Treatment, 57 (11). pp. 4842-4852. ISSN 1944-3994

Altaee, Ali and Sharif, Adel and Zaragoza, Guillermo and Ismail, Ahmad Fauzi (2015) Evaluation of FO-RO and PRO-RO designs for power generation and seawater desalination using impaired water feeds. Desalination, 368 . pp. 27-35. ISSN 0011-9164

Aluhwal, O. K. H. and Junin, R. B. and Nasri, N. S. B. (2017) Surfactant alternating carbonated water injection (SACW) is a new process for enhanced oil recovery. Advanced Science Letters, 23 (9). pp. 9085-9089. ISSN 1936-6612

Alwaan, Ismaeel and Hassan, Azman (2014) Effects of zinc borate loading on thermal stability, flammability, crystallization properties of magnesium oxide/(90/10) mLLDPE/(NR/ENR-50) blends. Iranian Polymer Journal (English Edition), 23 (4). pp. 277-287. ISSN 1735-5265

Alwi, Sharifah Rafidah Wan and Manan, Zainuddin A. and Samingin, Mohd. Hisham and Misran, Norrazi (2006) Retrofit water systems the SHARPS way. Chemical Engineering Progress, 102 (11). pp. 20-27. ISSN 0360-7275

Aly Ibrahim, Amgad Ahmed (2012) Proton conducting membrane by radiation-induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetrafluoro ethylene) film and phosphoric acid doping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aman Nor, Nor Farahiyah (2015) Influence of churning and thawing temperatures on yield and quality of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Amanda, Eviomitta Rizki and Sanagi, Mohd. Marsin and Wan Ibrahim, Wan Aini and Raharjo, Yanuardi (2015) Gelatin-alginate coated cellulose acetate membrane for the extraction of heavy metal ions from water samples. In: 3rd International Science Postgraduate Conference 2015, 24-26 Feb,2015, Johor Bahru, Johor.

Ambrose, Angelina F. and Al-Amin, Abul Quasem (2015) An assessment of hydrogen fuel cell vehicles in Malaysia. In: 5th International Conference on Fuel Cell and Hydrogen Technology (ICFCHT), 1-3 Sept, 2015, Kuala Lumpur, Malaysia.

Amilia, Linggawati and Lang, Dorothea and Mohammad, Abdul Wahab (2004) Synthesis and characterization of clay filled polysulfone membran: the effect of composition and calcination of clay. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Amin, Nor Aishah Saidina and Istadi, Istadi (2006) Selective Conversion Of Methane To C2 Hydrocarbons Using Carbon Dioxide As An Oxidant Over Cao-Mno/Ceo2 Catalyst. Studies in Surface Science and Catalysis, 159 . pp. 213-216. ISSN 0167-2991 (Unpublished)

Amin, Norsarahaida and Tan, Eng Fong and Manan, Z. A. (2003) Selective reduction of NOx with C3H6 over Cu and Cr promoted CeO2 catalysts. Applied Catalysis B: Environmental , 43 (1). pp. 57-69. ISSN 0926-3373

Amin, N. S. and Tahir, M. (2013) Syngas production and applications for greenhouse gas mitigation. In: Syngas: Production, Applications and Environmental Impact. Nova Science Publishers, Inc., pp. 269-295. ISBN 978-162100870-5

Amin, Nor Aishah Saidina and Pheng, Soon Ee (2006) Methane conversion to higher hydrocarbons over W/HZSM-5-based catalysts in the presence of oxygen. Catalysis Communications, 7 (6). pp. 403-407. ISSN 1566-7367

Amin Elfagaih, Fawzi Mohamed (2008) Catalytic reforming of n-octane and heavy naphtha fraction over tri-metallic modified catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Aminuddin, Nuru Iman and Ahmad, Farediah and Taher, Muhammad (2015) Antioxidant, cholinesterase and tyrosinase inhibitory activities of Calophyllum symingtonianum and Calophyllum depressinervosum (Guttiferae). In: International Conference on Natural Products 2015, 24-25 March, 2015, Johor Bahru, Johor.

Amir, H. M. S. and Nurun, N. and Iqbal, N. and Nur, F. R. and Lee, L. H. and Mariam, F. M. N. and Sharifudin, M. S. and Wan Rashidah, W. A. K. and A. A. Mukred, J. and Razauden, Z. and Mona, Z. (2016) Effect of heat treatment on the antioxidant activities of two cultivars of sweet potatoes. Jurnal Teknologi, 78 (6-12). pp. 111-115. ISSN 0127-9696

Amiri, Morteza and Yunan, Mat Hussin and Zahedi, Gholamreza and Jaafar, Mohd. Zaidi (2012) Introducing new method to improve log derived saturation estimation in tight shaly sandstones-a case study from mesaverde tight gas reservoir. Journal of Petroleum Science and Engineering, 92-93 . pp. 132-142. ISSN 0920-4105

Amiri, Morteza and Zahedi, Gholamreza Reza and Yunan, Mat Hussin (2015) Water saturation estimation in tight shaly gas sandstones by application of Progressive Quasi-Static (PQS) algorithm - a case study. Journal of Natural Gas Science and Engineering, 22 . pp. 468-477. ISSN 1875-5100

Ammasi, Sriraj (2005) Dual bed catalytic reactor system for direct conversion of methane to liquid hydrocarbons. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Amran, N. A. and Jusoh, M. (2016) Effect of coolant temperature and circulation flowrate on the performance of a vertical finned crystallizer. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Amran, U. I. and Ahmad, A. and Othman, M. R. (2017) Kinetic based simulation of methane steam reforming and water gas shift for hydrogen production using aspen plus. Chemical Engineering Transactions, 56 . pp. 1681-1686. ISSN 2283-9216

Amzirin, Mohammad Iqram and Hassim, Mimi Haryani and M. Kasmani, Rafiziana and Kidam, Kamarizan and Mat, Ramli (2014) The effectiveness of emergency response plan in specialty chemicals company in Malaysia. Chemical Engineering Transactions, 36 . pp. 91-96. ISSN 1974-9791

Anam Norddin, Muhd. Noorul (2002) A study on the effect of coil insertion system on the evaporation of LPG from commercial storage cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Andenan, Nurnadia (2010) Injection molded silane crosslinkable rice straw/high density polyethlene biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ang, Boo Chung (2000) Synthesis and characterization of MCM-41 and use as a catalyst in friedel-crafts reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ang, R. R. and Sin, L. T. and Bee, S. T. and Tee, T. T. and Kadhum, A. A. H. and Rahmat, A. R. and Wasmi, B. A. (2017) Determination of zinc glutarate complexes synthesis factors affecting production of propylene carbonate from carbon dioxide and propylene oxide. Chemical Engineering Journal, 327 . pp. 120-127. ISSN 1385-8947

Ang, Rui Ren and Lee, Tin Sin and Bee, Soo Tueen and Tee, Tiam Ting and Kadhum, Abdul Amir Hassan and Rahmat, Abdul Razak and Wasmi, Bilal A. (2015) A review of copolymerization of green house gas carbon dioxide and oxiranes to produce polycarbonate. Journal of Cleaner Production, 102 . pp. 1-17. ISSN 0959-6526

Anggoro, Didi Dwi (1998) Modification and characterization of HZSM-5 zeolite loaded with transition metal catalysts for single step conversion of methane to gasoline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ani, F. N. (2015) Utilization of bioresources as fuels and energy generation. In: Electric Renewable Energy Systems. Elsevier Inc., pp. 140-155. ISBN 978-012804448-3

Ani, Farid Nasir and Tan, Jaan Soon and Mansor, Muhd. Ridzuan and Yusof, Ahmad Anas (2004) Energy conversation in gas separation application using carbon absorption & pressure swing adsorption (PSA) system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Anjura, Cosmas (2006) Simulation and optimization of hydrogen production from autothermal reforming of ethane for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Anuar, Aisyah (2011) Effect of encapsulation on physicochemical properties and retention of pineapple flavour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Anuar, E. and Saufi, S. M. and Seman, M. N. A. and Yussof, H. W. and Ismailb, A. F. (2017) Thin film composite hollow fiber membrane for separation in biorefinery. Chemical Engineering Transactions, 56 . pp. 1099-1104. ISSN 2283-9216

Anuar, S. M. M. and Jaafar, M. Z. and Sulaiman, W. R. W. and Ismail, A. R. (2017) Monitoring water alternate gas process using streaming potential. Chemical Engineering Transactions, 56 . pp. 943-948. ISSN 2283-9216

Anyika, C. and Majid, Z. A. and Rashid, M. and Isa, A. B. and Ismail, N. and Zakaria, M. P. and Yahya, A. (2016) Toxic and nontoxic elemental enrichment in biochar at different production temperatures. Journal of Cleaner Production, 131 . pp. 810-821. ISSN 0959-6526

Arabshahi, Zohreh (2013) High-cycle fatigue behavior of temporomandibular joint implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ardhyananta, Hosta and Abdul, Fakhreza and Widyastuti, Widyastuti and Sulistijono, Sulistijono and Hassan, Azman and Kurniawan, Denni (2014) Tensile and thermal properties of Bambusa arundinacea and Dendrocalamus asper culm fibers. Advanced Materials Research, 845 . pp. 237-240. ISSN 1022-6680

Ardhyananta, Hosta and Abdul, Fakhreza and Widyastuti, Widyastuti and Sulistijono, Sulistijono and Hassan, Azman and Kurniawan, Denni (2013) Tensile and thermal properties of Bambusa arundinacea and Dendrocalamus asper culm fibers. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Arif, Khatijah (2011) Size reduction of nanoparticles using microwave method for photo degradation of dye. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Arif, S. M. and Ma, N. L. and Wagiran, A. and Rahmat, Z. (2016) Evaluation of three RNA extraction methods from three cultivars of Malaysian upland rice. Jurnal Teknologi, 78 (1). pp. 109-112. ISSN 0127-9696

Ariffin, Nur Farhayu and Hussin, Mohd. Warid and Mohd.Sam, Abdul Rahman and Bhutta, Muhammad Aamer Rafique and Abdul Shukor Lim, Nor Hasanah and Abd. Khalid, Nur Hafizah (2015) Degree of hardening of epoxy-modified mortars without hardener in tropical climate curing regime. In: Advanced Materilas Research, 20-22 Aug, 2014, Kuala Lumpur, Malaysia.

Ariffin, S. J. and Yahayu, M. and El Enshasy, H. and Malek, R. A. and Aziz, A. A. and Hashim, N. M. and Zakaria, Z. A. (2017) Optimization of pyroligneous acid production from palm kernel shell and its potential antibacterial and antibiofilm activities. Indian Journal of Experimental Biology, 55 (7). pp. 427-435. ISSN 0019-5189

Aris, Noor Fatheyah (2016) Characterization and properties of semi-biodegradable low density polyethylene/palm pressed fibre biocomposite film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aris, Noor Fatheyah and A. Majid, Rohah and Wan Hassan, Wan Hasamudin and Abd. Rahman, Mohd. Faizal and Ng, Yik Mun (2014) Effects of stone powder on water absorption and biodegradability of low density polyethylene/palm pressed fibre composite film. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering 2014, 18-22 March, 2014, Skudai, Johor.

Aris, Noor Fatheyah and Abd. Majid, Rohah and Wan Hassan, Wan Hasamudin and Abd. Rahman, Mohd. Faizal and Ng, Yik Mun (2014) Effects of stone powder on water absorption and Biodegradability of low density polyethylene/palm pressed fibre composite film. Applied Mechanics and Materials, 554 . pp. 123-127. ISSN 1660-9336

Aris, Syahidatul Adura (2007) Treatment of palm oil mill effluent using effctive microorganisms in sequencing batch reactor treatment system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Arjmandi, R. and Hassan, A. and Zakaria, Z. (2017) Polylactic acid green nanocomposites for automotive applications. Green Energy and Technology (978331). pp. 193-208. ISSN 1865-3529

Arjmandi, R. and Ismail, A. and Hassan, A. and Abu Bakar, A. (2017) Effects of ammonium polyphosphate content on mechanical, thermal and flammability properties of kenaf/polypropylene and rice husk/polypropylene composites. Construction and Building Materials, 152 . pp. 484-493. ISSN 0950-0618

Arjmandi, R. and Suib, N. and Hassan, A. and Muhamad, I. I. and Pa'a, N. and Zakaria, Z. (2017) Tensile and morphological properties of bacterial cellulose nanowhiskers reinforced polylactic acid nanocomposites. Chemical Engineering Transactions, 56 . pp. 1327-1332. ISSN 2283-9216

Arjmandi, Reza and Hassan, Azman and Eichhorn, Stephen J. and Mohamad Haafiz, M. K. and Zakaria, Zainoha and Tanjung, Faisal Amri (2015) Enhanced ductility and tensile properties of hybrid montmorillonite/cellulose nanowhiskers reinforced polylactic acid nanocomposites. Journal of Materials Science, 50 (8). pp. 3118-3130. ISSN 0022-2461

Arjmandi, Reza and Hassan, Azman and Majeed, Khaliq and Zakaria, Zainoha (2015) Rice husk filled polymer composites. International Journal of Polymer Science, 2015 . ISSN 1687-9422

Arjmandi, Reza and Hassan, Azman and Mohamad Haafiz, Mohamad Kassim and Zakaria, Zainoha and Islam, Md. Saiful (2016) Effect of hydrolysed cellulose nanowhiskers on properties of montmorillonite/polylactic acid nanocomposites. International Journal of Biological Macromolecules, 82 . pp. 998-1010. ISSN 0141-8130

Arjmandi, Reza and Hassan, Azman and Mohamad Kassim, Mohamad Haafi and Zakaria, Zainoha and Inuwa, Ibrahim Mohammed (2014) Characterization of polylactic acid/microcrystalline cellulose/montmorillonite hybrid composites | Pencirian komposit polilaktik asid/selulosa mikrohablur/ hibrid montmorilonit. Malaysian Journal of Analytical Sciences, 18 (3). pp. 642-650. ISSN 1394-2506

Arjmandi, Reza and Mustaffa Kamal, Mohammad Hakim Ramadhan and Iqbal, Tariq and Hassan, Azman and Zakaria, Zainoha and Mohd. Asri, Syazeven Effatin Azma (2015) Effect of acid hydrolysis time on tensile and morphological properties of microcrystalline chitin filled polylactic acid biocomposites. In: Innovation in Science and Technology (IICIST 2015), 20-22 Apr, 2015, Kuala Lumpur, Malaysia.

Aroon, M. A. and Ismail, Ahmad Fauzi and Matsuura, T. and Rahmati, M. M. Montazer (2010) Performance studies of mixed matrix membranes for gas separation : a review. Separation and Purification Technology, 75 (3). 229 -242. ISSN 1383-5866

Aroon, Mohammad Ali and Ismail, Ahmad Fauzi and Montazer-Rahmati, Mohammad Mehdi and Matsuura, Takeshi (2010) Effect of raw multi-wall carbon nanotubes on morphology and separation properties of polyimide membranes. Separation Science and Technology, 45 (16). pp. 2287-2297. ISSN 0149-6395

Aroona, Mohammad Ali and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2013) Beta-cyclodextrin functionalized MWCNT: a potential nano-membrane material for mixed matrix gas separation membranes development. Separation and Purification Technology, 115 . pp. 39-50. ISSN 1383-5866

Arsad, Agus (2010) Compatibiliser effects on properties of polyamide-6/acrylonitrile-butadiene-styrene and polyamide-6/acrylonitrile-butadiene-styrene/short glass fibrethermoplastic composite. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Arsad, Agus and Hassan, Azman and Mohd. Idris, Mohd. Nizam and Rahmat, Abdul Razak (2006) The mechanical properties of nylon 6 (pa6)/acrylonitrile-butadiene-styrene (ABS) blends. In: VIth National Symposium on Polymeric Materials 2006, 13-14 December 2006,, Subang Jaya. (Unpublished)

Arsad, Norlin and Alias, Norul Aina and Ruskam, Aminuddin (2014) Science in the muslim world: contribution of UTM scientist. In: Seminar on Religion and Science: Muslim Contributions Semester 1 2014/2015, 9 Dec, 2014, Skudai, Johor.

Arsad, Agus and Sulaiman, Hanizam and Rahmat, Abdul Razak and Jaafar, Ahmad Tarmizi (2006) Combustion behavior of poultry and plastics waste in as bench scale combustor. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Arsat, Rashidah and Breedon, Michael and Kalantar-Zadeh, Kourosh and Wlodarski, Wojtek (2011) Conductometric H2 gas sensor with doped and dedoped electropolymerized polyaniline nanostructures. Jurnal Teknologi, 55 (1). pp. 167-175. ISSN 0127–9696

Asadollahtehrani, Mahsa (2011) Characterization of polyaniline with nano zinc oxide as additives in epoxy coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Asgharzadehahmadi, Seyed Ali (2012) Synthesis and characterization of polyacrylamide based hydrogel containing magnesium oxide nanoparticles for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Asli, Umi Aisah (2007) Teaching Portfolio. [Teaching Resource] (Unpublished)

Asli, U. A. and Sadikin, A. N. and Le, C. D. (2017) A study on the impact of international academic visit exchange programme among chemical engineering students. Chemical Engineering Transactions, 56 . pp. 1093-1098. ISSN 2283-9216

Asli, Umi Aisah (2014) Comparison of acid and enzymatic hydrolysis of palm empty fruit bunch for fermentable sugar production. In: The 7th International Symposium of Environmental Leaders, 13 Oct, 2014, Skudai, Johor.

Asli, Umi Aisah and Abdullah, Isah N. and Hamid, Hazirah and Zakaria, Zainul Akmar (2014) Enzymatic hydrolysis of oil palm biomass for fermentable sugar using polyethylene glycol immobilized cellulase. In: The Seventh Annual Conference on the Challenges in Environmental Science and Engineering, 12-16 Dec, 2014, Skudai, Johor.

Asli, Umi Aisah and Nwaha, Isah and Hamid, Hazirah and Zakaria, Zainul Akmar and Sadikin, Aziatul Niza and Kamaruddin, Mohd. Johari (2016) A kinetic study of enzymatic hydrolysis of oil palm biomass for fermentable sugar using polyethylene glycol (PEG) immobilized cellulase. Jurnal Teknologi, 78 (8-3). pp. 51-57. ISSN 0127-9696

Asli, Umi Aisah and Sadikin, Aziatul Niza and Md. Kasmani, Rafiziana and Rasit Ali, Roshafima (2016) Impak program mobiliti terhadap pembangunan diri mahasiswa. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan (NASDEC 2016), 28-30 Nov, 2016, Johor Bahru, Malaysia.

Asli, Umi Aisah and Saidina Amin, Nor Aishah and Abdul Karim, Siti Kartina and Siregar, Tirena Bahnur (2005) Roles of bronsted acid sites in composite catalyst for triglyceride cracking. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Asmadi, M. and Kawamoto, H. and Saka, S. (2017) Characteristics of softwood and hardwood pyrolysis in an ampoule reactor. Journal of Analytical and Applied Pyrolysis, 124 . pp. 523-535. ISSN 0165-2370

Asnawi, S. and Abd. Aziz, A. and Abd. Aziz, R. and Khamis, A. K. (2008) Formulation of geranium oil loaded solid lipid nanoparticles for mosquito repellent application. Journal of Chemical & Natural Resources Engineering, 2 . pp. 90-99. ISSN 1823-5255

Asnawi, S. and Mohd. Zaki, Z. and Abdul Aziz, A. and Khamis, A. K. and Abdul Aziz, B. (2008) Evaluation of the potential of Pelargonium Radula extract in repelling Aedes Aegypti. Journal of Chemical & Natural Resources Engineering, 2 . pp. 11-19. ISSN 1823-5255

Athimulam, Arunasalam and Kumaresan, Sivakumar and Foo, Dominic Chwan Yee and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2006) Modelling and optimization of Eurycoma longifolia water extract production. Food and Bioproducts Processing, 84 (2 C). pp. 139-149. ISSN 0960-3085

Atta, M. and Bukhari, A. and Idris, A. (2016) Enhanced lipid selective extraction from Chlorella vulgaris without cell sacrifice. Algal Research, 20 . pp. 7-15. ISSN 2211-9264

Attaran, Seyed Ahmad (2015) Tensile, barrier, and degradation properties of low density polyethylene/epoxidized natural rubber nanocomposite films. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Au, A. and Cheng, K. K. and Wei, L. K. (2017) Metabolomics, lipidomics and pharmacometabolomics of human hypertension. In: Advances in Experimental Medicine and Biology. Springer New York LLC, pp. 599-613.

Au, A. and Griffiths, L. R. and Irene, L. and Kooi, C. W. and Wei, L. K. (2017) The impact of APOA5, APOB, APOC3 and ABCA1 gene polymorphisms on ischemic stroke: Evidence from a meta-analysis. Atherosclerosis, 265 . pp. 60-70. ISSN 0021-9150

Awang, Mariyamni (1992) Parallel programming of a resevoir simulator. Jurnal Teknologi, 19 . pp. 1-13. ISSN 2180-3722

Awang, Mariyamni and Mat, Ramli (2004) The importance of the choice of text book in studying and teaching thermodynamics. In: Conference on Engineering Education 2004, 14-15 Dec 2004.

Awang, Mariyamni and Goh, Meng Seng (2008) Sulfonation of phenols extracted from the pyrolysis oil of oil palm shells for enhanced oil recovery. ChemSusChem, 1 (3). pp. 210-214. ISSN 1864-5631

Awang, Mohd. Azrie and Azelan, Noor Amirah and Wan Mustaffa, Nurul Ain Aqilla and Abdul Aziz, Ramlan and Hasham, Rosnani (2014) Influence of processing parameters on the yield and 6-gingerol content of zingiber officinale extract. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Awang, N. and Jaafar, J. and Ismail, A. F. and Matsuura, T. and Othman, M. H. D. and Rahman, M. A. (2017) Electrospun nanocomposite materials for polymer electrolyte membrane methanol fuel cells. In: Organic-Inorganic Composite Polymer Electrolyte Membranes: Preparation, Properties, and Fuel Cell Applications. Springer International Publishing, pp. 165-191. ISBN 978-331952738-3

Awang, N. and Jaafar, J. and Ismail, A. F. and Othman, M. H. D. and Rahman, M .A. and Yusof, N. and Aziz, F. and Salleh, W. N. W. and Suradi, S. S. and Ilbeygi, H. and Wan Mohd. Noral Azman, W. N. E. and Arthanareeswaran, G. (2017) Development of dense void-free electrospun SPEEK-Cloisite15A membrane for direct methanol fuel cell application: optimization using response surface methodology. International Journal of Hydrogen Energy, 42 (42). pp. 26496-26510. ISSN 0360-3199

Awang, Noranizah and Ismail, Ahmad Fauzi and Jaafar, Juhana and Matsuura, Takeshi and Junoh, Hazlina and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. (2015) Functionalization of polymeric materials as a high performance membrane for direct methanol fuel cell: a review. Reactive and Functional Polymers, 86 . pp. 248-258. ISSN 1381-5148

Awang, Nuha (2013) Synthesis of metals stearate and thermal degradation study of polystyrene metals stearate blends. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Awang, Mariyamni and Mat, Ramli and Hassan, Onn (2005) Bottom-up approach of teaching classical thermodynamics in the Faculty of Chemical and Natural Resources Engineering, UTM. In: Regional Conference on Engineering Education, December 12--13, 2005, Johor, Malaysia.

Ayob, S. N. and Abdul Murad, A. M. and Abu Bakar, F. D. and Md. Illias, R. (2017) Reaction optimization of Aspergillus niger α-L-arabinofuranosidase for improved arabinose production from kenaf stem. Jurnal Teknologi, 79 (4). pp. 137-145. ISSN 0127-9696

Ayob, Syafikah (2013) Model peralihan jisim serentak bagi titisan-titisan yang pelbagai saiz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ayob, Zahidah and Abd. Samad, Azman and Mohd. Bohari, Siti Pauliena and Jamil, Shajarahtunnur (2015) Optimisation of Indole-3-Butyric Acid (IBA) concentrations for production of biomass and phenolics from adventitious roots of Justicia Gendarussa. In: International Conference on Natural Product (ICNP) 2015, 24-25 Mar, 2015, Johor Bahru, Johor.

Ayub, N. F. and Hashim, S. and Jamaluddin, J. and Adrus, N. (2017) New UV LED curing approach for polyacrylamide and poly(: N -isopropylacrylamide) hydrogels. New Journal of Chemistry, 41 (13). pp. 5613-5619. ISSN 1144-0546

Ayub, Nur Farizah (2016) Novel UV led photopolymerization and characterization for polyacrylamide and poly (n-isopropylacrylamide) hydrogels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ayyar, M. and Mani, M. P. and Jaganathan, S. K. and Rathanasamy, R. (2017) Preparation, characterization and blood compatibility assessment of a novel electrospun nanocomposite comprising polyurethane and ayurvedic-indhulekha oil for tissue engineering applications. Biomedizinische Technik . ISSN 0013-5585 (In Press)

Azahar, W. N. A. W. and Jaya, R. P. and Hainin, M. R. and Bujang, M. and Ngadi, N. (2016) Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder. Construction and Building Materials, 126 . pp. 218-226. ISSN 0950-0618

Azarpour, A. and Alwi, S. R. W. (2017) Prediction of industrial catalysts deactivation rate using first principle model and operating data. Malaysian Journal of Analytical Sciences, 21 (1). pp. 204-212. ISSN 1394-2506

Azarpour, A. and N. G. Borhani, T. and R. Wan Alwi, S. and A. Manan, Z. and I. Abdul Mutalib, M. (2017) A generic hybrid model development for process analysis of industrial fixed-bed catalytic reactors. Chemical Engineering Research and Design, 117 . pp. 149-167. ISSN 0263-8762

Azarpour, Abbas and Borhani, Tohid Nejad Ghaffar and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Behbehani, Mazyar Madooli (2015) Prediction of Pd/C catalyst deactivation rate and assessment of optimal operating conditions of industrial hydropurification process. Industrial & Engineering Chemistry Research, 54 (28). pp. 7067-7082. ISSN 0888-5885

Azarpour, Abbas and Zahedi, Gholamreza (2012) Hybrid dynamic modeling of 4-CBA hydrogenation fixed-bed catalytic reactor of PTA production plant. Computer Aided Chemical Engineering, 31 . pp. 1667-1671. ISSN 1570-7946

Azarpour, Abbas and Zahedi, Gholamreza (2012) Performance analysis of crude terephthalic acid hydropurification in an industrial trickle-bed reactor experiencing catalyst deactivation. Chemical Engineering Journal, 209 . pp. 180-193. ISSN 1385-8947

Azdarpour, Amin (2015) Direct and indirect aqueous mineralization using red gypsum for carbon dioxide sequestration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Azdarpour, Amin and Asadullah, Mohammad and Junin, Radzuan and Mohammadian, Erfan and Hamidi, Hossein and Mohamad Daud, Ahmad Rafizan and Manan, Muhammad (2015) Extraction of calcium from red gypsum for calcium carbonate production. Fuel Processing Technology, 130 . pp. 12-19. ISSN 0378-3820

Azdarpour, Amin and Rahmani, Omeid and Mohammadian, Erfan and Parak, Mahdi and Mohamad Daud, Ahmad Rafizan and Junin, Radzuan (2013) The effects of polymer and surfactant on polymer enhanced foam stability. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium, 7-9 April 2013, Langkawi, Malaysia.

Azelan, Noor Amirah and Awang, Mohd. Azrie and Abd. Malek, Roslinda and Musa, Nur Fashya and Aziz, Ramlan and Hasham @ Hisam, Rosnani (2015) Antibacterial activity of zingiber officinale and zingiber zerumbet by using Turbo Extractor Distillator (TED). In: International Conference on Natural Products 2015, 24-25 March, 2015, Johor Bahru, Johor.

Azelan, Noor Amirah and Hasham, Rosnani and Awang, Mohd. Azrie and Abd. Malek, Roslinda and Musa, Nur Fashya and Aziz, Ramlan (2015) Antibacterial activity of zingiber officinale and zingiber zerumbet essential oils extracted by using turbo extractor distillator (TED). Jurnal Teknologi, 77 (3). pp. 43-47. ISSN 0127-9696

Azelan, Noor Amirah and Mohamad, Mohd Faizal and Ngadiran, Sulaiman and Aziz, Ramlan and Hasham @ Hisam, Rosnani (2014) Extraction of zingiber officinale and zingiber zerumbet essential oil using turbo extraction distillation (TED). In: 5th Internatonal Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Azelee, I. W. and Goh, P. S. and Lau, W. J. and Ismail, A. F. and Arzhandi, M. R. D. and Wong, K. C. and Subramaniam, M. N. (2017) The effect of novel multiwalled carbon nanotube-titania nanotube hybrid in polyamide active layer towards water permeability and high sodium chloride rejection performance of nanofiltration membrane desalination. Malaysian Journal of Analytical Sciences, 21 (2). pp. 402-408. ISSN 1394-2506

Azhar, Nur Amalina and Soloi, Sabrina and A. Majid, Rohah and Jamaluddin, Jamarosliza (2015) Grafting efficiency of lignin-grafted-polyacrylic acid. In: Applied Mechanics and Materials/World Virtual Conference on Advanced Research in Materials and Engineering Application (WVCARMEA2014), 2015.

Azhari, Muhammad Azwar (2012) Supression of plasticization on assymetric hollow fiber polysulfone membrane using constant heating and progressive heating techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Aziz, A. H. A. and Yunus, M. A. C. and Arsad, N. H. and Lee, N. Y. and Idham, Z. and Razak, A. Q. A. (2016) Optimization of supercritical carbon dioxide extraction of piper betel linn leaves oil and total phenolic content. In: 2nd International Conference on Chemical Engineering, ICCE 2016, 26 October 2016 through 27 October 2016, Indonesia.

Aziz, A. A. and Samsudin, S. A. and Hay, J. N. and Jenkins, M. J. (2017) The effect of a secondary process on polymer crystallization kinetics – 3. Co-poly (lactic acid). European Polymer Journal, 94 . pp. 311-321. ISSN 0014-3057

Aziz, F. and Ismail, Ahmad Fauzi (2015) Spray coating methods for polymer solar cells fabrication: a review. Materials Science in Semiconductor Processing, 39 . pp. 416-425. ISSN 1369-8001

Aziz, Farhana (2010) Preparation and characterization of Para-Phenylenediamine cross-linked polyimide membranes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Aziz, Farhana (2006) Simulation and optimization of gasoline autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Aziz, Farhana and Ismail, Ahmad Fauzi (2015) Absorption properties enhancement using montmorillonite (MMT) as filler in spray-coated P3HT:PCBM thin films. Polymer Bulletin, 72 (7). pp. 1827-1834. ISSN 1700-8391

Aziz, Farhana and Ismail, Ahmad Fauzi (2010) Preparation and characterization of cross-linked matrimid (R) membranes using para-phenylenediamine for O-2/N-2 separation. Separation And Purification Technology, 73 (3). pp. 421-428. ISSN 1383-5866

Aziz, M. and Ismail, A. F. (2017) X-ray photoelectron spectroscopy (XPS). In: Membrane Characterization. Elsevier Inc., pp. 81-93. ISBN 978-044463776-5

Aziz, Z. A. A. and Mohd. Ali, S. A. and Ahmad, A. and Mohd. Setapar, S. H. (2016) Application of herbal extract and its medicinal value. Der Pharmacia Lettre, 8 (9). pp. 161-167.

Aziz, Azila and Idris, Ani and Abd. Rahman, Badarulhisam (2004) The optimization of the enzyme immobilization methods for amperometric glucose biosensors. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Aziz, Azila (2006) Production of enzymatic glucose biosensors. Project Report. Universiti Teknologi Malaysia, Skudai, Johor. (Unpublished)

Azman, Hassan and Haworth, Barry (2006) Impact properties of acrylate rubber-modified PVC: Influence of temperature. Journal of Materials Processing Technology, 172 (3). pp. 341-345. ISSN 0924-0136

Azman, Hassan and Yee, Joon Wee and Ko, Choon Ying and Ahmad Johari, Umat Lukman (2002) The use of brabender plasticorder to study the fusion behaviour of calcium carbonate filled impact-modified PVC-U. In: proceeding of the Research Seminar on materials and Construction, 29 -30 October 2002, Universiti Teknologi Malaysia.

Azman, M. and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Yaacob, Haryati and Ismail, Che Ros and Mazlan, Nur Shima Fadhilah and Ahmad Khairudin, Nurul Bahiyah (2013) Binding mode study of β-glucosidase b from p.Polymyxca with cellobiose and laminaribiose. International Journal of Chemical Engineering and Applications, 4 (6). pp. 410-414. ISSN 2010-0221

Azman, Muhammad Ikmal (2017) Four season hybrid power system targeting using power pinch analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Azman, Nadia Farhana and Abdeshahian, Peyman and Kadier, Abudukeremu and Nasser Al-Shorgani, Najeeb Kaid Nasser and Salih, Noura K.M. and Lananan, Izzati and Abdul Hamid, Aidil and Kalil, Mohd. Sahaid (2016) Biohydrogen production from de-oiled rice bran as sustainable feedstock in fermentative process. International Journal of Hydrogen Energy, 41 (1). pp. 145-156. ISSN 0360-3199

Azman, Nur Aifaa (2006) Optimization of jet fuel autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Azmi, N. A. and Yusof, K. M. and Phang, F. A. (2017) How to motivate chemical engineering undergraduates to learn programming? Chemical Engineering Transactions, 56 . pp. 1303-1308. ISSN 2283-9216

Azmi, Rabiah Assyamiah (2016) Polyvinyl alcohol-crosslinked polyvinylidene fluoride hollow fiber membrances for crude palm oil refining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Azmi, S. and Razak, S. I. A. and Abdul Kadir, M. R. and Iqbal, N. and Hassan, R. and Nayan, N. H. M. and Abdul Wahab, A. H. and Shaharuddin, S. (2017) Reinforcement of poly(vinyl alcohol) hydrogel with halloysite nanotubes as potential biomedical materials. Soft Materials, 15 (1). pp. 45-54. ISSN 1539-445X

Azmin, S. N. H. M. and Manan, Z. A. and Alwi, S. R. W. and Chua, L. S. and Mustaffa, A. A. and Yunus, N. A. (2016) Herbal processing and extraction technologies. Separation and Purification Reviews, 45 (4). pp. 305-320. ISSN 1542-2119

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2016) Selection of minimum temperature difference (dTmin) for heat exchanger network synthesis based on trade-off plot. Applied Energy, 162 . pp. 1259-1271. ISSN 0306-2619

Abang Zaidel, Dayang Norulfairuz and Chronakis, Ioannis S. and Meyer, Anne S. (2012) Enzyme catalyzed oxidative gelation of sugar beet pectin: kinetics and rheology. Food Hydrocolloids, 28 (1). pp. 130-140. ISSN 0268-005X

Abouzari-Lotf, Ebrahim and Shockravi, Abbas and Rafieimanesh, A. and Saremi, Masoumeh and avadi, Ali and Nasef, Mohamed Mahmoud (2014) Novel polyoxadiazoles with non-coplanar ortho-linked structures as highly CO2 permselective membranes. RSC Advances, 4 (35). pp. 17993-18002. ISSN 2046-2069

Abd. Hamid, Mohd. Kamaruddin and Stachowiak, Gwidon and Samion, Syahrullail (2012) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 905-913. ISSN 0094-243X

Ahmad Zaini, Muhammad Abbas and Amano, Yoshimasa and Machida, Motoi (2014) Enhanced lead(II) binding properties of heat-treated cattle-manure-compost-activated carbons. Desalination and Water Treatment, 52 (34-36). pp. 6420-6429. ISSN 1944-3994

Abdul Rahman, Wan Aizan and Dehbari, Nazila and Moazeni, Nima (2014) Effects of kenaf core on properties of poly( lactic acid) bio- composite. Polymer Composites, 35 (6). pp. 1220-1227. ISSN 1548-0569

B

Baigi, Mohsen Marvi (2016) Scurrula ferruginea methanol extract induces reactive oxygen species-mediated and mitochondrial-dependent apoptosis in breast cancer cells. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Baba, Umar Muktar (2008) Synthesis and modification of aluminophosphate molecular sieve using amine as carbon dioxide adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab (2013) Estimation of potential barium sulfate (barite) precipitation in oilfield brines using a simple predictive tool. Environmental Progress and Sustainable Energy, 32 (3). pp. 860-865. ISSN 1944-7442

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab (2013) A novel analytical method predicts plug boundaries of Bingham plastic fluids for laminar flow through annulus. Canadian Journal of Chemical Engineering, 91 (9). pp. 1590-1596. ISSN 0008-4034

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab and Jamili, Ahmad (2012) Estimation of crude oil salt content using a simple predictive tool approach. Journal of Petroleum Science and Engineering, 96-97 . pp. 68-72. ISSN 0920-4105

Bahari, S. S. and Heryansyah, A. and Muhamad, I. I. B. and Supriyanto, E. (2017) Effect of palm waste on sloping land to fresh fruit bunch production in oil palm plantation. Walailak Journal of Science and Technology, 14 (7). pp. 581-587. ISSN 1686-3933

Baharulrazi, N. and Man, S. H. C. and Mohamad, Z. and Nor, H. M. and Ali, W. K. W. (2017) Effect of various alcohols and reaction time on the properties of hydroxyl terminated natural rubber synthesized via oxidative degradation. Chemical Engineering Transactions, 56 . pp. 583-588. ISSN 2283-9216

Baharulrazi, Norfhairna (2009) Mechanical properties of benzoylated oil palm empty fruit bunch short fiber filled impact modified poly (vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Baharum, Sabariah and Mohd. Yusoff, Mohd. Rashid and Jaafar , Yunus (1990) Membina kaitan taklinear antara kepekatan zarahan terampai dengan variat-variat meteorologi. Working Paper. MARDI, Serdang.

Bahraeian, Sobhan and Abron, Khatereh and Pourjafarian, Fatemeh and A. Majid, Rohah (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: Advanced Materials Research, 26-27 March 2013, Penang, Malaysia.

Bahraeian, Sobhan and Abron, Khatereh and Pourjafarian, Fatemeh and Abd. Majid, Rohah (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 November 2012, Penang, Malaysia.

Bahram Barati, (2013) Simulating mutational effects on thermal stability of cellubiohydrolys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Bahri, Bahram (2013) Modeling and experimental analysis of exhaust gas temperature and misfire in a converted-diesel homogeneous charge compression ignittion engine fuelled with ethanol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baig, U. and Gondal, M. A. and Alam, M. F. and Wani, W. A. and Younus, H. (2016) Pharmacological evaluation of poly(3-methylthiophene) and its titanium(IV)phosphate nanocomposite: DNA interaction, molecular docking, and cytotoxic activity. Journal of Photochemistry and Photobiology B: Biology, 164 . pp. 244-255. ISSN 1011-1344

Baig, Umair and Wani, Waseem A. and Lee, Ting Hun (2015) Facile synthesis of an electrically conductive polycarbazole-zirconium(IV)phosphate cation exchange nanocomposite and its room temperature ammonia sensing performance. New Journal of Chemistry, 39 (9). pp. 6882-6891. ISSN 1144-0546

Bakar, A. A. and Hassan, A. and Yusof, A. F. M. (2009) Effect of processing temperatures on mechanical properties of oil palm empty fruit bunch-filled PVC extrudates. Journal of Reinforced Plastics and Composites, 28 (20). pp. 2433-2443. ISSN 0731-6844

Bakar, A. H. B. A. and Koay, Y. S. and Ching, Y. C. and Abdullah, L. C. and Choong, T. S. Y. and Alkhatib, M. and Mobarekeh, M. N. and Zahri, N. A. M. (2016) Removal of fluoride using quaternized palm kernel shell as adsorbents: equilibrium isotherms and kinetics studies. BioResources, 11 (2). pp. 4485-4511. ISSN 2214-7861

Bakar, Aznizam Abu and Hassan, Azman and Yusof, Ahmad Fuad Mohd (2008) Study of processability of poly(vinyl chloride): Effects of acrylic and chlorinated polyethylene impact modifiers, oil palm empty fruit bunch fiber, and mixing temperature. Journal of Vinyl & Additive Technology, 14 (4). pp. 204-210.

Bakar, H. T. A. and Siong, P. H. and Yan, C. K. and Kidam, K. and Ali, M. W. and Hassim, M. H. and Kamarden, H. (2017) Analysis of main accident contributor according to process safety management elements failure. Chemical Engineering Transactions, 56 . pp. 991-996. ISSN 2283-9216

Bakar, M. A. A. and Ahmad, A. and Harun, M. (2017) Sensitivity analysis for optimisation of brine purification process. Chemical Engineering Transactions, 56 . pp. 235-240. ISSN 2283-9216

Bakar, S. H. A. and Hamid, M. K. A. and Alwi, S. R. W. and Manan, Z. A. (2017) An industrial case study application in synthesising a feasible heat exchanger network. Chemical Engineering Transactions, 56 . pp. 775-780. ISSN 2283-9216

Bakar, S. H. A. and Hamid, M. K. A. and Alwi, S. R. W. and Manan, Z. A. (2017) A simple case study on application in synthesising a feasible heat exchanger network. Chemical Engineering Transactions, 56 . pp. 157-162. ISSN 2283-9216

Bakar, S. H. A. and Abd. Hamid, Mohd. K. and Alwi, S. R. W. and Manan, Z. A. (2017) Sensitivity analysis of industrial heat exchanger network design. Chemical Engineering Transactions, 56 . pp. 1489-1494. ISSN 2283-9216

Bakeri, Gh H. and Ismail, Ahmad Fauzi and Shariaty-Niassar, Mojtaba and Matsuura, Takeshi (2010) Effect of polymer concentration on the structure and performance of polyetherimide hollow fiber membranes. Journal of Membrane Science, 363 (1 - 2). 103 - 111. ISSN 0376-7388

Bakeri, Gh. and Ismail, Ahmad Fauzi and Rahimnejad, M. and Matsuura, T. and Rana, D. (2012) The effect of bore fluid type on the structure and performance of polyetherimide hollow fiber membrane in gas-liquid contacting processes. Separation and Purification Technology, 98 . pp. 262-269. ISSN 1383-5866

Bakeri, Gh. and Naeimifard, S. and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2015) A porous polyethersulfone hollow fiber membrane in a gas humidification process. RSC Advances, 5 (19). pp. 14448-14457. ISSN 2046-2069

Bakeri, Gh. H. and Ismail, Ahmad Fauzi and Rahimnejad, Mostafa and Matsuura, Takeshi (2014) Analysis of polyetherimide/N-Methyl-2-Pyrrolidone/nonsolvent phase separation behavior. Journal of Polymer Research, 21 (4). ISSN 1022-9760

Bakeri, Gholamreza and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, Takeshi (2012) Development of high performance surface modified polyetherimide hollow fiber membrane for gas-liquid contacting processes. Chemical Engineering Journal, 198-19 . pp. 327-337. ISSN 1385-8947

Bakeri, Gholamreza and Rezaei-Dashtarzhandi, Masoud and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Abdullah, Mohd. Sohaimi and Ng, Be Cheer (2017) Porous polyethersulfone hollow fiber membrane in CO2 separation process via membrane contactor - the effect of nonsolvent additives. Korean Journal of Chemical Engineering, 34 (1). pp. 160-169. ISSN 0256-1115

Bakeri, Nor Asyiqin (2017) Optimization of SWIETENIA MAHAGONI seed in supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bakhsheshi-Rad, H. R. and Abdellahi, M. and Hamzah, E. and Ismail, A. F. and Bahmanpour, M. (2016) Modelling corrosion rate of biodegradable magnesium-based alloys: the case study of Mg-Zn-RE-xCa (x = 0, 0.5, 1.5, 3 and 6 wt%) alloys. Journal of Alloys and Compounds, 687 . pp. 630-642.

Bakhsheshi-Rad, H. R. and Hadisi, Z. and Hamzah, E. and Ismail, A. F. and Aziz, M. and Kashefian, M. (2017) Drug delivery and cytocompatibility of ciprofloxacin loaded gelatin nanofibers-coated Mg alloy. Materials Letters, 207 . pp. 179-182. ISSN 0167-577X

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Aziz, M. and Hadisi, Z. and Kashefian, M. and Najafinezhad, A. (2017) Novel nanostructured baghdadite-vancomycin scaffolds: in-vitro drug release, antibacterial activity and biocompatibility. Materials Letters, 209 . pp. 369-372. ISSN 0167-577X

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Aziz, M. and Kasiri-Asgarani, M. and Ghayour, H. and Razzaghi, M. and Hadisi, Z. (2017) In vitro corrosion behavior, bioactivity, and antibacterial performance of the silver-doped zinc oxide coating on magnesium alloy. Materials and Corrosion, 68 (11). pp. 1228-1236. ISSN 0947-5117

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Kasiri-Asgarani, M. and Daroonparvar, M. and Parham, S. and Iqbal, N. and Medraj, M. (2016) Novel bi-layered nanostructured SiO2/Ag-FHAp coating on biodegradable magnesium alloy for biomedical applications. Ceramics International, 42 (10). pp. 11941-11950. ISSN 0272-8842

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Asgarani, Masoud Kasiri and Jabbarzare, Saeid and Iqbal, N. and Abdul Kadir, Mohammed Rafiq (2016) Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications. Materials Science and Engineering C, 60 . pp. 526-537. ISSN 0928-4931

Balaji, A. and Jaganathan, S. K. and Ismail, A. F. and Rajasekar, R. (2016) Fabrication and hemocompatibility assessment of novel polyurethane-based bio-nanofibrous dressing loaded with honey and Carica papaya extract for the management of burn injuries. International Journal of Nanomedicine, 11 . pp. 4339-4355. ISSN 1176-9114

Balaji, Arunpandian (2016) Microwave assisted aloe vera coating on metallocen polyethylene for improving biocompatibility. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Balakrishnan, Harintharavimal (2010) Mechanical, thermal and morphological properties of montmorillonite filled linear low density polyethylene-toughened polylactic acid nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Balakrishnan, Harintharavimal and Attaran, Seyed Ahmad and Imran, Muhammad and Hassan, Azman and Wahit, Mat Uzir (2014) Epoxidized natural rubber-toughened polypropylene/organically modified montmorillonite nanocomposites. Journal of Thermoplastic Composite Materials, 27 (2). pp. 233-250. ISSN 0892-7057

Balakrishnan, Harintharavimal and Hassan, Azman and Isitman, Nihat Ali and Kaynak, Cevdet (2012) On the use of magnesium hydroxide towards halogen-free flame-retarded polyamide-6/polypropylene blends. Polymer Degradation and Stability, 97 (8). pp. 1447-1457. ISSN 0141-3910

Balakrishnan, Harintharavimal and Hassan, Azman and Wahit, Mat Uzir (2010) Mechanical, thermal, and morphological properties of polylactic acid/linear low density polyethylene blends. Journal Oof Elastomers and Plastics, 42 (3). 223 -239. ISSN 0095-2443

Balakrishnan, Harintharavimal and Hassan, Azman and Wahit, Mat Uzir and Yussuf, A. A. and Abdul Razak, Shamsul Bahri (2010) Novel toughened polylactic acid nanocomposite: Mechanical, thermal and morphological properties. Materials and Design, 31 (7). 3289 -3298. ISSN 0261-3069

Balakrishnan, Harintharavimal and Husin, Muhamad Rasyidi and Wahit, Mat Uzir and Abdul Kadir, Mohammed Rafiq (2014) Preparation and characterization of organically modified montmorillonite-filled high density polyethylene/hydroxyapatite nanocomposites for biomedical applications. Polymer - Plastics Technology and Engineering, 53 (8). pp. 790-800. ISSN 1525-6111

Balasundram, V. and Ibrahim, N. and Kasmani, R. Md. and Hamid, M. K. A. and Isha, R. and Hasbullah, H. and Ali, R. R. (2017) The effect of catalyst loading (Ni-Ce/Al2O3) on coconut copra pyrolysis via thermogravimetric analyser. Chemical Engineering Transactions, 56 . pp. 901-906. ISSN 2283-9216

Balasundram, V. and Ibrahim, N. and Md. Kasmani, R. and Abd. Hamid, Mohd. K. and Isha, R. and Hasbullah, H. and Ali, R. R. (2017) Catalytic pyrolysis of coconut copra and rice husk for possible maximum production of bio-oil. Chemical Engineering Transactions, 56 . pp. 1177-1182. ISSN 2283-9216

Balasundram, V. and Ibrahim, N. and Samsudin, M. D. H. and Kasmani, R. Md. and Hamid, Mohd. K. A. and Isha, R. and Hasbullah, H. (2017) Thermogravimetric studies on the catalytic Pyrolysis of rice husk. Chemical Engineering Transactions, 56 . pp. 427-432. ISSN 2283-9216

Balasundram, Vekes and Alias, Noorhaza and Ibrahim, Norazana and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2015) Investigation on thermochemical behaviour of Malaysia biomasses via Thermogravimetric Analysis (TGA). In: Conference on Emerging Energy & Process Technology, 15-16 Dec, 2015, Melaka, Malaysia.

Banerjee, Sujoy and Debnath, Mira (2006) Kinetic parameter studies of 6-amino penicillanic acid (6-APA) production by agarose immobilized penicillin acylase in a packed column reactor. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Barrera-Medrano, M. E. and Newton, P. and Martinez-Botas, R. and Rajoo, S. and Tomita, I. and Ibaraki, S. (2016) Effect of exit pressure pulsation on the performance and stability limit of a turbocharger centrifugal compressor. In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, GT 2016, 13-17 June 2016, Seoul, South Korea.

Bashir Ghouse, Mohammed Shariff (2014) Parallel computing for simulating nanoscale temperature behaviour on laser glass interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Basri, H. and Ismail, A. F. and Aziz, M. (2009) Effect of pvp addition in the preparation of polyethersulfone (PES)–AgNO3 antibacterial membrane. Journal of Applied Membrane Science & Technology, 10 . pp. 21-33. ISSN 1823–366X

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Basri, Hatijah and Irfan, Masooma and Irfan, Muhammad and Lau, Woei-Jye and Kartohardjono, Sutrasno (2017) Quantitative analysis of MWCNT agglomeration in polymeric-based membranes using atomic force microscope. Surface and Interface Analysis, 49 (1). pp. 55-62. ISSN 0142-2421

Basri, Hatijah and Ismail, Ahmad Fauzi and Aziz, Madzlan (2008) Effect of different solvent in the preparation of polyethersulfone(pes)-ag polymer composite. Jurnal Teknologi, 49F . pp. 133-140. ISSN 0127-9696

Basri, Hatijah and Ismail, Ahmad Fauzi and Aziz, Madzlan and Rusop, Mohamad and Soga, Tetsuo (2009) Effect of different incorporation route on the properties of polyethersulfone-silver membrane. In: AIP Conference Proceedings. American Institute of Physics., USA, pp. 93-97. ISBN 978-073540673-5

Bayat, A. E. and Rajaei, K. and Junin, R. (2016) Assessing the effects of nanoparticle type and concentration on the stability of CO2 foams and the performance in enhanced oil recovery. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 511 . pp. 222-231. ISSN 0927-7757

Bayat, Ali Esfandyari and Junin, Radzuan and Kharrat, Riyaz and Hejri, Shahab (2015) Evaluation of vapour extraction process and its prospect as an enhanced oil recovery method. International Journal of Oil, Gas and Coal Technology, 9 (4). pp. 394-421. ISSN 1753-3317

Bayat, Ali Esfandyari and Junin, Radzuan and Mohsin, Rahmat and Hokmabadi, Mehrdad and Shamshirband, Shahaboddin (2015) Influence of clay particles on Al2O3 and TiO2 nanoparticles transport and retention through limestone porous media: measurements and mechanisms. Journal of Nanoparticle Research, 17 (5). pp. 1-14. ISSN 1388-0764

Bazmi, A. A. and Zahedi, G. and Hashim, H. (2011) Progress and challenges in utilization of palm oil biomass as fuel for decentralized electricity generation. Renewable and Sustainable Energy Reviews, 15 (1). pp. 574-583. ISSN 1364-0321

Bazmi, Aqeel and Zahedi, Gholamreza and Hashim, Haslenda (2010) Progress and challenges in utilization of palm oil biomass as fuel for decentralized electricity generation. Renewable and Sustainable Energy Reviews, 15 (1). 574 -583. ISSN 1364-0321

Bazmi, Aqeel Ahmed (2013) Superstructure optimization and forecasting of decentralized energy generation based on palm oil biomass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Beden, Mazin Abdulhussein (2015) Adsorption and stripping of ethanol from aqueous solution using sepabeads207 adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bee, S. L. and Abdullah, M. A. A. and Mamat, M. and Bee, S. T. and Sin, L. T. and Hui, D. and Rahmat, A. R. (2017) Characterization of silylated modified clay nanoparticles and its functionality in PMMA. Composites Part B: Engineering, 110 . pp. 83-95. ISSN 1359-8368

Bee, S. T. and Sin, L. T. and Khor, S. L. and Lim, K. S. and Rahmat, A. R. (2017) Enhancement of mechanical and thermal properties of (Polyvinyl alcohol)-Dialdehyde starch composites via the incorporation of montmorillonite nanofillers. Journal of Vinyl and Additive Technology, 23 . E128-E141. ISSN 1083-5601

Bee, S. T. and Sin, L. T. and Ratnam, C. T. and Chua, G. K. and Rahmat, A. R. (2017) A study of roles of different valence of copper oxide interaction with electron beam irradiation in polyethylene composite. Journal of Thermoplastic Composite Materials, 30 (7). pp. 915-937. ISSN 0892-7057

Bee, Soo Tueen (2009) Mechanical properties and processability of hybrid talc and calcium carbonate filled polyvinyl chloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Bee, Soo Tueen and Mok, Wen Ru and Lee, Tin Sin and Tee, Tiam Ting and Issabayeva, Gulnaziya and Rahmat, Abdul Razak (2014) Evaluation performance of multiple plasticizer systems on the physicomechanical, crystallinity and thermogravimetry of polyvinyl chloride. Journal of Polymer Engineering, 34 (6). pp. 521-529. ISSN 0334-6447

Bee, Soo Tueen and Ratnam, C. T. and Lee, Tin Sin and Tiam, Ting Tee and Hui, David and Kadhum, Abdul Amir Hassan and Rahmat, Abdul Razak and Lau, Joshin (2014) Effects of electron beam irradiation on mechanical properties and nanostructural-morphology of montmorillonite added polyvinyl alcohol composite. Composites Part B: Engineering, 63 . pp. 141-153. ISSN 1359-8368

Bee, Soo-Tueen and Hassan, Azman and Ratnam, Chantara T. and Tee, Tiam-Ting and Lee, Tin Sin (2012) Effects of montmorillonite on the electron beam irradiated alumina trihydrate added polyethylene and ethylene vinyl acetate nanocomposite. Polymer Composites, 33 (11). pp. 1883-1892. ISSN 0272-8397

Bee, Soo-Tueen and Lee, Tin Sin and Ratnam, C. T. and Haraveen, K. J. S. and Tee, Tiam-Ting and Rahmat, Abdul Razak (2015) Investigation of the interaction of copper(II) oxide and electron beam irradiation crosslinkable polyethylene. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms, 360 . pp. 36-45. ISSN 0168-583X

Beh, Jeng Hua (2017) Synthesis and characterization of lithium iron phosphate nanowires from sago pith waste cellulose nanofibril aerogel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

BeTeoh, Jeng Hua and Lai, Jau Choy and Lim, Teck Hock (2015) A review on nanocellulose and its application in producing aerogels. In: National Conference on Wood Based Technology Engineering and Innovation, NCWEI'15, 17-18 Nov, 2015, Kota Kinabalu, Malaysia.

Bhatti, I. and Bhutto, A. W. and Qureshi, K. and Kamarudin, K. S. N. and Bazmi, A. A. and Ahmad, F. (2016) Hydrodynamics study of the modified rotating disc contactor for CO2 absorption from natural gas using emulsion liquid membrane. Chemical Engineering Research and Design, 111 . pp. 465-478. ISSN 0263-8762

Bhatti, I. and Qureshi, K. and Kamarudin, K. S. N. and Bazmi, A. A. and Bhutto, A. W. and Ahmad, F. and Lee, M. (2016) Innovative method to prepare a stable emulsion liquid membrane for high CO2 absorption and its performance evaluation for a natural gas feed in a rotating disk contactor. Journal of Natural Gas Science and Engineering, 34 . pp. 716-732. ISSN 1875-5100

Bidin, Noriah and Wan Aizuddin, Wan Razali and Saidin, Mohd. Khairi (2009) Generation of femtosecond pulsed from TI:Ssapphire oscillator. Jurnal Fizik UTM, 4 . pp. 18-25. ISSN 0128-8644

Bidsorkhi, H. C. and Adelnia, H. and Naderi, N. and Moazeni, N. and Mohamad, Z. (2017) Ethylene vinyl acetate copolymer nanocomposites based on (un)modified sepiolite: Flame retardancy, thermal, and mechanical properties. Polymer Composites, 38 (7). pp. 1302-1310. ISSN 0272-8397

Bidsorkhi, H. C. and Riazi, H. and Emadzadeh, D. and Ghanbari, M. and Matsuura, T. and Lau, W. J. and Ismail, A. F. (2016) Preparation and characterization of a novel highly hydrophilic and antifouling polysulfone/nanoporous TiO2 nanocomposite membrane. Nanotechnology, 27 (41). ISSN 0957-4484

Bidsorkhi, Hossein Cheraghi (2013) Effect of sepiolite content on mechanical, thermal and flammability properties of ethylene vinyl acetate nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bidsorkhi, Hossein Cheraghi and Mohamad, Zurina (2015) Flammability and thermal properties of ethylenevinyl acetate filled treated and untreated sepiolite nanocomposites. In: Malaysia Polymer International Conference (MPIC2015), 10-11 Jun, 2015, Kuala Lumpur, Malaysia.

Bimakra, Mandana and Abdul Rahmana, Russly and Taipa, Farah Saleena and Ganjloo, Ali and Md. Salleh, Liza and Selamat, Jinap and Hamid, Azizah and Zaidul, I. S. M. (2011) Comparison of different extraction methods for the extraction of major bioactive flavonoid compounds from spearmint (Mentha spicata L.) leaves. Food and Bioproducts Processing, 89 (1). 67 - 72. ISSN 0960-3085

Bolong, N. and Ismail, A. F. and Salim, M. R. (2007) Effect of jet stretch in the fabrication of polyethersulfone hollow fiber spinning for water separation. Applied Membrane Science & Technology, 6 . pp. 17-25. ISSN 1823–366X

Bolong, N. and Ismail, A. F. and Salim, M. R. and Rana, D. and Matsuura, T. (2007) Influence of surface modifying macromolecules (SMMs) on polyethersulfone hollow fiber membranes for water separations. Journal of Applied Membrane Science & Technology, 5 . pp. 11-18. ISSN 1823–366X

Bolong, N. and Saad, I. and Makinda, J. and Yaser, A. Z. and Abdullah, M. H. and Ismail, A. F. (2016) Influence of oil palm empty fruit bunch (OPEFB) agro-waste properties as filtration medium to improve urban stormwater. Jurnal Teknologi, 78 (8). pp. 39-46. ISSN 0127-9696

Bolong, Nurmin and Ismail, Ahmad Fauzi and Salim, Mohd. Razman and Matsuura, Takeshi (2008) Miscibility characteristics of poly (ethersulfone) (pes) hollow fiber membranes with charged-surface modifying macromolecules (csmm) for water separations applications. Jurnal Teknologi, 49F . pp. 123-132. ISSN 0127-9696

Bong, C. P. C. and Lim, L. Y. and Lee, C. T. and Ho, W. S. and Klemes, J. J. (2017) The kinetics for mathematical modelling on the anaerobic digestion of organic waste - a review. Chemical Engineering Transactions, 61 . pp. 1669-1674. ISSN 2283-9216

Bono, Awang and Prabakar, A. and Yan, Yan Farm (2006) Effect of ultrasound on adsorption of azeotropic and non-azeotropic mixture onto activated carbon. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Borhani, T. N. G. and Afkhamipour, M. and Azarpour, A. and Akbari, V. and Emadi, S. H. and Manan, Z. A. (2016) Modeling study on CO2 and H2S simultaneous removal using MDEA solution. Journal of Industrial and Engineering Chemistry, 34 . pp. 344-355. ISSN 1226-086X

Borhani, T. N. G. and Saniedanesh, M. and Bagheri, M. and Lim, J. S. (2016) QSPR prediction of the hydroxyl radical rate constant of water contaminants. Water Research, 98 . pp. 344-353. ISSN 0043-1354

Borhani, Tohid Nejad Ghaffar and Akbari, Vahid and Abd. Hamid, Mohd. Kamaruddin and Abdul Manan, Zainuddin (2015) Rate-based simulation and comparison of various promoters for CO2 capture in industrial DEA-promoted potassium carbonate absorption unit. Journal of Industrial and Engineering Chemistry, 22 . pp. 306-316. ISSN 1226-086X

Boumehira, A .Z. and Malek, R. A. and Othman, Mohd. Nor and Ware, I. and Ramli, S. and Malek, K. and Hacene, H. and El-Enshasy, H. A. (2016) Bioprocess development for β-and γ-rubromycin production: a human telomerase inhibitors, by Streptomyces sp. ADR1. Journal of Scientific and Industrial Research, 75 (10). pp. 609-614. ISSN 0022-4456

Bufares, Ahmed M. (2011) Flashback and quenching of laminar premixed flame on rotating burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) Flashback of laminar premixed flame in rotating burner. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1292-1299. ISSN 0094-243X

Bujang, Kopli and Ang, Shin Ying and Awang Adeni, Dayang Salwani (2006) Effects of filtration volume using powdered activated charcoal on the recovery of L (+)-lactic acid from sago starch. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Bukhari, A. and Atta, M. and Idris, A. (2017) Synthesis of poly(L-) lactide under simultaneous cooling and microwave heating by using immobilised candida antarctica lipase B. Chemical Engineering Transactions, 56 . pp. 1447-1452. ISSN 2283-9216

Busairi, Abdullah Moch (2002) Lactic acid fermentation of pineapple wastes by lactobacillus delbrueckii. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

C

Che Man, Rohaida (2016) Improvement of cyclodextrin glucanotranferase excretion and cell viability of recombinant Escherichia Coli immobilized on hollow fiber membrane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Che Yunus, Mohd. Azizi and Zhari, Salman and Haron, Saharudin and Arsad, Nur Husnina and Idham, Zuhaili and Ruslan, Muhammad Syafiq Hazwan (2015) Extraction and identification of vitamin E from Pithecellobium Jiringan seeds using supercritical carbon dioxide. Jurnal Teknologi, 74 (7). pp. 29-33. ISSN 2180-3722

C. Y., Mohd Azizi and N. A., Nik Norulaini and B. S., Wahyu and A. K. , Mohd Omar (2007) Extraction and separation of djenkolic acid from pithecellobium jiringan seeds using supercritical carbon dioxide extraction. In: Advances in Separation Processes. Penerbit UTM , Johor, pp. 172-192. ISBN 978-983-52-05958-8

C. Y., Mohd. Azizi and N. A., Nik Norulaini and Setianto, Wahyu and A. K., Mohd. Omar (2006) Supercritical carbon dioxide extraction of constituents of pithecellobium jiringan seeds and their identification using time of flight gas spectrometry. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chai, Siang-Piao and Sharif Zein, Sharif Hussein and Mohamed, Abdul Rahman (2006) The production of cox-free hydrogen and carbon nanofibers from direct catalytic decomposition of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chan, Giek Far and Abdul Rashid, Noor Aini and Chua, Lee Suan and Ab.llah, Norzarini and Nasiri, Rozita and Mohamad Ikubar, Mohamed Roslan (2012) Communal microaerophilic-aerobic biodegradation of amaranth by novel NAR-2 bacterial consortium. Bioresource Technology, 105 . pp. 48-59. ISSN 0960-8524

Chan, Kian Hwa (2015) Fabrication of polyethersulfone membrane by polyethyleneglycol coated cobalt-doped iron oxide for copper (II) removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chan, Mieow Kee (2011) Haemodialysis cellulose acetate-monosodium glutamate membrane obtained from dopes prepared by microwave dissolution technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chan, Mieow Kee and Idris, Ani (2012) Modification of cellulose acetate membrane using monosodium glutamate additives prepared by microwave heating. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2115-2123. ISSN 1226-086X

Chan, Mieow Kee and Idris, Ani (2010) Permeability performance of different molecular weight cellulose acetate hemodialysis membrane. Separation and Purification Technology, 75 (2). pp. 102-113. ISSN 1383-5866

Chang, Siu Hua and Yaacob, Zulkefli and Mohsin, Rahmat (2007) Effect of various manifold absolute pressures and air flowrate on throttle body injection mixer in compressed natural gas motorcycle. Journal of Chemical and Natural Resources Engineering, 1 . pp. 40-49. ISSN 1833-5255

Chang, Hui Chung (2016) Synthesis and characterization of poly(3,4- ethylenedioxythiophene)-poly(styrenesulfonate) coated polylactide/poly(3-hydroxybutyrate-co-3- hydroxyvalerate) electrospun membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Chang, Hui Quin (2012) Preparation of water-in-oil-in-water emulsions by repeated premix cellulose acetate membrane emulsification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Charlie, Agnese Jati (2011) Optimization of pretreatment and enzymatic hydrolysis of empty fruit bunch for xylose production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chaturvedi, N. D. and Manan, Z. A. and Wan Alwi, S. R. and Bandyopadhyay, S. (2016) Effect of multiple water resources in a flexible-schedule batch water network. Journal of Cleaner Production, 125 . pp. 245-252. ISSN 0959-6526

Chaturvedi, Nitin Dutt and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Bandyopadhyay, Santanu (2016) Maximising heat recovery in batch processes via product streams storage and shifting. Journal of Cleaner Production, 112 . pp. 2802-2812. ISSN 0959-6526

Chaturvedi, Nitin Dutt and Manan, Zainuddin Abdul and Wan Alwi, Sharifah Rafidah and Bandyopadhyay, Santanu (2015) A linear mathematical model to determine the minimum utility targets for a batch process. Chemical Engineering Transactions, 45 . pp. 115-120. ISSN 2283-9216

Che Abdul Razak, Noorzilawani (2016) Mechanical, thermal, morphological and flammability properties of halloysite nanotube reinforced compatibilized poly(ethylene terephthalate) / polypropylene nanocomosities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Ahmad, Mohamad Aidil Ellal and Mamat, Che Rozid (2015) Physico-chemical characterization of biomaterial product from Kappaphycus Alverezii. In: International Conference on Natural Products 2015, 24-25 March, 2015, Johor Bahru, Johor. (In Press)

Che Hafizan, Che Hafizan and Zainon Noor, Zainura and Michael, F. L (2014) Energy production from natural gas: evaluation of potential environmental impacts using life cycle assessment approach. Advanced Materials Research, 864-86 . pp. 1132-1138. ISSN 1022-6680

Che Hassan, Che Hafizan (2016) Environmental degradation assessment of biodiesel production using life cycle analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Jusoh, Nurfatehah Wahyuny (2015) Electrosynthesis of zinc oxide-copper oxide supported on mesostructured silica nanoparticles for photocatalytic decolorization of methyl orange. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Jusoh, Nurfatehah Wahyuny and Abdul Jalil, Aishah and Triwahyono, Sugeng (2014) Effect of synthesis method on the photocatalytic performance of zinc oxide loaded on mesostructured silica nanoparticles. In: 27th Regional Symposium of Malaysia Analytical Sciences, 8-10 Dec, 2014, Johor Bahru, Malaysia.

Che Man, Siti Hajjar and Hashim, Azanam S. and Md. Akil, Hazizan (2007) Preparation and characterization of styrene-methyl methacrylate In deproteinized natural rubber latex (SMMA-DPNR). E-Polymers . ISSN 1618-7229

Che Man, Rohaida and Ismail, Ahmad Fauzi and Mohd. Fuzi, Siti Fatimah Zaharah and Ghazali, Nazlee Faisal and Md. Illias, Rosli (2016) Effects of culture conditions of immobilized recombinant Escherichia coli on cyclodextrin glucanotransferase (CGTase) excretion and cell stability. Process Biochemistry, 51 (4). pp. 474-483. ISSN 1359-5113

Che Man, Siti Hajar (2014) Synthesis of hybrid polymer/graphene materials using miniemulsion polymerization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Man, Siti Hajjar and Hashim, Azanam and Md. Akil, Hazizan (2006) Preparation and characterization of Styrene-Methyl Methacrylate in Deproteinized Natural Rubber Latex (SMMA-DPNR). In: VIth National Symposium on Polymeric Materials 2006, 13-14 December 2006,, Subang Jaya. (Unpublished)

Che Me, Salasiah and Nur, Hadi and Lee, Siew Ling (2015) Novel oxidative-acidic bifunctional catalyst of tungsten-phosphate modified silica-titania. In: One Day Eu-Asean Symposium and Workshop On Photocatalysis, 24 Nov, 2015, Johor Bahru, Johor.

Che Othman, F. E. and Yusof, N. and Jaafar, J. and Ismail, Amri F. and Hasbullah, H. and Abdullah, N. and Ismail, M. S. (2015) Preparation and characterization of polyacrylonitrile/ manganese dioxides- based carbon nanofibers via electrospinning process. In: 5th International Conference on Chemical and Bioprocess Engineering (ICCBPE), 9-12 Dec, 2015, Kota Kinabalu, Malaysia.

Che Othman, Faten Ermala (2017) Metal oxides incorporated polyacrylonitrile-based activated carbon nanofibers on methane adsorption. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Othman, Faten Ermala and Yusof, Norhaniza and Hasbullah, Hasrinah and Ismail, Ahmad Fauzi and Jaafar, Juhana and Abdullah, Norfadhilatuladha (2015) Effects of different loading of magnesium oxide on activated carbon nanofibers for methane adsorption. In: First International Conference of Low Carbon Asia (ICLCA 2015), 11-13 Oct, 2015, Johor Bahru, Malaysia.

Che Othman, Faten Ermala and Yusof, Norhaniza and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abdullah, Norfadhilatuladha and Hasbullah, Hasrinah (2015) Adsorption of cadmium (II) ions by polyacrylonitrile-based activated carbon nanofibers/ magnesium oxide as its adsorbents. In: 28th Symposium of Malaysian Chemical Engineers 2015, 21-22 Oct, 2015, Kuala Lumpur, Malaysia.

Che Othman, Faten Ermala and Yusof, Norhaniza and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abdullah, Norfadhilatuladha and Hasbullah, Hasrinah (2016) Adsorption of cadmium (II) ions by polyacrylonitrile-based activated carbon nanofibers/magnesium oxide as its adsorbents. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1467-1473.

Che Pa, Nasrul Fikry (2008) Synthesis and characterization of polydimethylsiloxane blended polystyrene interpenetrating polymer network membrane for pervaporationof ethanol and water mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Che Puan, Othman and Nabay, Mustapha Mamadi and Ibrahim, Muttaka Na’iya (2014) Effect of vehicular traffic volume and composition on carbon emission. Jurnal Teknologi, 70 (4). pp. 17-20. ISSN 0127-9696

Che Rusli, Muhammad Syhamiel Iqhwan and Hassan, Mohd. Izzat and Sultana, Naznin and Ismail, Ahmad Fauzi (2017) Characterization of PCL/zeolite electrospun membrane for the removal of silver in drinking water. Jurnal Teknologi, 79 (1-2). pp. 89-95. ISSN 0127-9696

Che Sidik, Nor Azwadi and Goh, C. K. and Muhammad Yazid, Muhammad Noor Afiq Witri (2012) Computational analysis of heat flow in computer casing. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 199-208. ISSN 0094-243X

Che Sidik, Nor Azwadi and Salehi, Mehran and Muhammad Yazid, Muhammad Noor Afiq Witri (2012) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 650-658. ISSN 0094-243X

Che Wan Mohd. Amil, Che Wan Nabihan (2016) Synthesis and characterization of adsorbent derived from pandan leaves for methylene blue removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Yunus, Mohd. Azizi and Arsad, Nur Husnina and Zhari, Salman and Idham, Zuhaili and Setapar, Siti Hamidah and Mustapha, Ana Najwa (2013) Effect of supercritical carbon dioxide condition on oil yield and solubility of Pithecellobium Jiringan (Jack) Prain seeds. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 45-50. ISSN 0127-9696

Che Yunus, Mohd. Azizi and Hasan, Manzurudin and Othman, Norasikin and Mohd. Setapar, Siti Hamidah and Md. Salleh, Liza and Ahmad Zaini, Muhammad Abbas and Idham, Zuhaili and Zhari, Salman (2013) Effect of particle size on the oil yield and catechin compound using accelerated solvent extraction. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 21-25. ISSN 0127-9696

Che Yunus, Mohd. Azizi and Idham, Zuhaili and Morad, Noor Azian (2015) Optimisation of squalene from palm oil mesocarp using supercritical carbon dioxide. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 Jun, 2015, Sabah, Malaysia.

Che Yunus, Mohd. Azizi and Rozak, Muhammad Naim and Lee, Nian-Yian and Ruslan, Muhammad Syafiq Hazwan and Mohd. Setapar, Siti Hamidah and Ahmad Zaini, Muhammad Abbas (2014) Extraction of virgin coconut (Cocos nucifera) oil using supercritical fluid carbon dioxide. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 11-15. ISSN 0127-9696

Che Yunus, Mohd. Azizi and Salman, Z. and Nik Norulain, N. A. and Mohd. Omar, A. K. (2008) Extraction and identification of compounds from parkia speciosa seeds by supercritical carbon dioxide. Journal of Chemical and Natural Resources Engineering, 2 . pp. 153-163. ISSN 1823-5255

Chee, Chit Lai (2007) Optimization of pullulanase production from Exiguobacterium sp. MAAC-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chee, L. P. and Alwi, S. R. W. and Lim, J. S. and Siwayanan, P. (2017) Production decision support system: Real-life emulsion plant case study. Chemical Engineering Transactions, 56 . pp. 1267-1272. ISSN 2283-9216

Chee, Lee Pheng (2017) Production decision support system for batch processes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Chee, Lee Pheng and Wan Alwi, Sharifah Rafidah and Lim, Jeng Shiun (2016) Production decision support system for batch processes. Journal of Advanced Research in Applied Sciences and Engineering Technology, 5 (1). pp. 7-21. ISSN 2462-1943

Chee, Tzeming and Lee, Tin Sin and Bee, Soo Tueen and Tee, Tiam Ting and Kadhum, Abdul Amir Hassan and Rahmat, Abdul Razak (2015) Roles of calcium, zinc, copper and titanium compounds on the degradation of polymers. Polymer - Plastics Technology and Engineering, 54 (5). pp. 441-461. ISSN 0360-2559

Chelliapan, Shreeshivadasan and Sallis, Paul J. (2011) Application of anaerobic biotechnology for pharmaceutical wastewater treatment. IIOAB Journal, 2 (1). pp. 13-21. ISSN 0976-3104

Chelliapan, Shreeshivadasan and Wilby, Thomas and Sallis, Paul J. and Yuzir, Ali (2011) Tolerance of the antibiotic tylosin on treatment perfomance of an up-flow aerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Chen, C. H. and Wan Abdul Rahman, Wan Aizan and Kumar, Bala (2005) Chemical Effect On Rotational Molding Grade Cross-Linked High Density Polyethylene (Xlhdpe) With Varying Concentration Of Antioxidant And Uv Stabilizer. In: Simposium Polimer Kebangsaan Ke-V, 23-24 August 205, Residence Hotel, UNITEN.

Chen, Siew Chin (2015) Optimization of formulation and process condition for downsizing of labisia pumila and ficus deltoidea loaded niosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chen, Wah Sit (2005) Application of artificial neural network genetic algorithm in inferential estimation and control of a distillation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chen, Xiao Long (2014) Extraction of squalene from palm oil mesocarp using supercritical carbon dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chen, Yong and Mat, Hanapi and Xu, Zhinan and Jin, Zhihua and Cen, Peilin (2004) Determination of teicoplanin A2's partition coefficient in different liquid-liquid extraction systems. Chinese Journal of Chemical Engineering, 12 (4). pp. 493-497. ISSN 1004-9541

Cheng, Kian Kai and Akasaki, Yuichi and Lecommandeur, Emmanuell and Lindsay, Ross T. and Murfitt, Steven A. and Walsh, Kenneth and Griffin, Julian L. (2014) Metabolomic analysis of Akt1-mediated muscle hypertrophy in models of diet-induced obesity and age-related fat accumulation. Journal of Proteome Research, 14 (1). pp. 342-352. ISSN 1535-3893

Cheng, Kian Kai and Lee, Baek Seok and Masuda, Takeshi and Ito, Takuro and Ikeda, Kazutaka and Hirayama, Akiyoshi and Deng, Lingli and Dong, Jiyang and Shimizu, Kazuyuki and Soga, Tomoyoshi and Tomita, Masaru and Palsson, Bernhard O and Robert, Martin (2014) Global metabolic network reorganization by adaptive mutations allows fast growth of Escherichia coli on glycerol. Nature Communications, 5 . ISSN 2041-1723

Cheng, Shu Ian and Stuckey, David C. (2016) Protein separation mechanisms in surfactant precipitation systems. Separation Science and Technology (Philadelphia), 51 (1). pp. 181-191. ISSN 0149-6395

Chermahini, Siavash Hosseinpour and Abdul Majid, Fadzilah Adibah (2011) Cosmeceutical values, antimicrobial activities and antioxidant properties of cashew leaves extract. African Journal of Biotechnology, 10 (65). pp. 14573-14582. ISSN 1684-5315

Cheu, S. C. and Kong, H. and Song, S. T. and Johari, K. and Saman, N. and Che Yunus, M. A. and Mat, H. (2016) Separation of dissolved oil from aqueous solution by sorption onto acetylated lignocellulosic biomass - equilibrium, kinetics and mechanism studies. Journal of Environmental Chemical Engineering, 4 (1). pp. 864-881. ISSN 2213-3437

Chew, Sau Yen and Hassan, Azman and Hashim, Shahrir (2003) The Effect Of Blending Acrylic Grafted Pvc And Pvc K-66 With Abs On Impact And Flexural Properties. Jurnal Teknologi Siri Khas A (39A). pp. 107-116. ISSN 0127-9696

Chew, Yin Hoon and Lee, Chew Tin (2006) External mass transfer model for a recirculated packed-bed batch reactor on the hydrolysis of palm olein using immobilized lipase. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chew, Yin Hoon and Lee, Chew Tin and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Razali, Firdausi (2008) External mass transfer model for the hydrolysis of palm olein using immobilized lipase. Food and Bioproducts Processing, 86 (4). pp. 276-282. ISSN 0960-3085

Chew, Boon Chong (2001) Concentration and purification of citric acid using electrodialysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chew, K. H. and Klemeš, J. J. and Wan Alwi, S. R. and Manan, Z. A. (2017) Process modification of Total Site Heat Integration profile for capital cost reduction. Applied Thermal Engineering, 89 . ISSN 1359-4311

Chew, Kew Hong (2015) Improved total site heat integration incorporating pressure drop and process modifications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chew, Kewhong and Klemeš, Jiří Jaromír and Wan Alwi, Sharifah Rafidah and Manan, Zainuddin Abdul and Reverberi, Andrea Pietro (2015) Total Site Heat Integration Considering Pressure Drops. Energies, 8 (2). pp. 1114-1137. ISSN 1994-7887

Chew, Kok Cheong (2000) Processing, microstructure and mechanical properties of cast aluminium-based metal matrix composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chew, Sau Yen (2004) Mechanical and flammability properties of ABS/PVC blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chew, Tin Lee and Morreale, Giacomo and Middelberg, Anton P. J. (2004) Combined In-Fermenter Extraction and Cross-Flow Microfiltration for Improved Inclusion Body Processing. Biotechnology & Bioengineering, 85 (1). pp. 103-113. ISSN 0006-3592

Chew, Yin Hoon (2007) External mass transfer model for the hydrolysis of palm olein using immobilized lipase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chew, Yin Hoon and Chua, Lee Suan and Cheng, Kian Kai and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Lee, Chew Tin (2008) Kinetic study on the hydrolysis of palm olein using immobilized lipase. Biochemical Engineering Journal, 39 (3). pp. 516-520. ISSN 1369-703X

Chezghani, Mohsen (2012) A graphical method for simultaneous targeting and design of multiple utility systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chia, Nyoke Goon (2017) A smart arrhythmia classification system based on wavelet transform and support vector machine techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Chien, Cassendra Bong Phun (2015) Effective microorganisms on organic matter with carbon and nitrogen mineralisation for empty fruit bunches composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chik, Ahmad Sabri (2004) The behavior of a batch and a continuous deodoriser for the deodorisation of Malaysian cocoa butter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chin, G. S. and Todo, H. and Kadhum, W. R. and Hamid, M. A. and Sugibayashi, K. (2016) In vitro permeation and skin retention of a-mangostin proniosome. Chemical and Pharmaceutical Bulletin, 64 (12). pp. 1666-1673. ISSN 0009-2363

Chin, Hon Keong (2002) Carbon dioxide reforming of methane : the effect of metal, support, temperature and reactant ratio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chin, Hong Neoh and Pui, Yi Yung and Zainon Noor, Zainura and Razak, Mohd. Hafizuddin and Aris, Azmi and Md. Din, Mohd. Fadhil and Ibrahim, Zaharah (2017) Correlation between microbial community structure and performances of membrane bioreactor for treatment of palm oil mill effluent. Chemical Engineering Journal, 308 . pp. 656-663. ISSN 1385-8947

Chin, Seng Lee and Mohd. Nor, Shadiah Husna and Al-Shanini, Ali and Ahmad, Arshad (2016) Operational risk analysis for undesired polymerization in overhead condenser of butadiene column. Jurnal Teknologi, 78 (8-3). pp. 43-50. ISSN 0127-9696

Ching, Kuan Yong (2008) Nickel oxide based catalysts for the simultaneous reactions of methanation and desulfurization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ching, Yern Chee (2001) Mechanical and morphological properties of impact modified PP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chiong, S. J. and Goh, P. S. and Ismail, A. F. (2017) Novel hydrophobic PVDF/APTES-GO nanocomposite for natural gas pipelines coating. Journal of Natural Gas Science and Engineering, 42 . pp. 190-202. ISSN 1875-5100

Chiong, Sie Jing (2017) Polyvinylidene fluoride/graphene oxide nanocomposite as anti-corrosion coating in natural gas steel pipelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Chong, Woon Chan and Mohd Nawawi, Mohd Ghazali and Sadikin, Aziatul Niza (2008) Pervaporation of isopropanol-water mixture using poly(vinyl) alcohol-zsm-5 membranes. Jurnal Teknologi (49F). pp. 159-166. ISSN 0127-9696

Chong, C. Y. and Lai, G. S. and Lau, W. J. and Yusof, N. and Goh, P. S. and Emadzadeh, D. (2016) Impacts of hydrophilic nanofillers on separation performance of thin film nanocomposite reverse osmosis membrane. Jurnal Teknologi, 78 (12). pp. 63-68. ISSN 0127-9696

Chong, Chee Ming (2005) The selective catalytic reduction of nitric oxide by propylene over bimetallic CeO2-ZrO2 supported catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chong, Chun Yew (2018) Synthesis and characterization of thin film nanocomposite reverse osmosis membrane for salt and boron removal. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Chong, K. C. and Lai, S. O. and Thiam, H. S. and Lau, W. J. (2016) The progress of polymeric membrane separation technique in O2/N2 separation. In: 2nd International Conference on Science and Engineering of Materials, ICoSEM 2015, 16-18 Nov 2015, Kuala Lumpur, Malaysia.

Chong, K. C. and Lim, C. E. and Lai, S. O. and Lau, W. J. (2016) Effect of ethylene glycol on polymeric membrane fabrication for membrane distillation. In: 2nd International Conference on Science and Engineering of Materials, ICoSEM 2015, 16-18 Nov 2015, Kuala Lumpur, Malaysia.

Chong, Kim Foong and Kamaruddin, Mohd. Johari and Johari, Anwar and Tuan Abdullah, Tuan Amran and Hassim, Mimi Haryani and Kidam, Kamarizan and Zakaria, Zaki Yamani and Wan Sulaiman, Wan Rosli (2015) Effect of processing parameters and heating techniques on the extraction yield of Eurycoma Longifolia (Tongkat Ali). In: Advanced Materials Research, 2015.

Chong, Kok Chung and Lai, Soon Onn and Lee, K. M. and Ooi, Boon Seng (2012) A study of computational fluid dynamics on membrane module in membrane distillation. In: ICIMTR 2012 - 2012 International Conference on Innovation, Management and Technology Research. IEEE, New York, USA, pp. 174-178. ISBN 978-146730655-3

Chong, Woon Chan (2012) Effect of exhaust gas stream recirculation on emission from a palm oil mill boiler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Choong, Thomas S. Y. and Abd. Aziz, Ramlan (2002) Modelling And Simulation Of Retentate-Permeate Recycle Premeator For The Enrichment Of Methane. Jurnal Teknologi F (36F). pp. 17-30. ISSN 0127-9696

Choong, Thomas Shean Yaw (1995) Modeling and simulation of gas separation using membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chow, Ming Fai and Yusop, Zulkifli and Teo, Fang Yenn (2016) Evaluation of stormwater runoff quality during monsoon and inter-monsoon seasons at tropical urban catchments. International Journal of River Basin Management, 14 (1). pp. 75-82. ISSN 1571-5124

Chowdhury, Ahmed Jalal Khan and Alam, Md. Zahangir and Shahlizah, Sahul Hamid (2006) Isolation, purification and screening of fingal strain for effective bioconversion of palm oil mlll effluent. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chowdhury, Md. Najmul Kabir and Ismail, Ahmad Fauzi and Beg, Mohammad Dalour Hossen and Hegde, Gurumurthy and Gohari, Rasool Jamshidi (2015) Polyvinyl alcohol/polysaccharide hydrogel graft materials for arsenic and heavy metal removal. New Journal of Chemistry, 39 (7). pp. 5823-5832. ISSN 1144-0546

Chua, L. S. (2016) Untargeted MS-based small metabolite identification from the plant leaves and stems of Impatiens balsamina. Plant Physiology and Biochemistry, 106 . pp. 16-22. ISSN 0981-9428

Chua, L. S. and Latiff, N. A. and Mohamad, M. (2016) Reflux extraction and cleanup process by column chromatography for high yield of andrographolide enriched extract. Journal of Applied Research on Medicinal and Aromatic Plants, 3 (2). pp. 64-70. ISSN 2214-7861

Chua, L. S. and Lau, C. H. (2017) Reflux extraction and column chromatography for rosmarinic acid- rich fraction from Orthosiphon stamineus. Natural Products Journal, 7 (1). pp. 30-36. ISSN 2210-3155

Chua, L. S. and Ruzlan, N. N. and Sarmidi, M. R. (2017) Recovery of rutin from labisia pumila extract using solid phase extraction. Acta Chimica Slovenica, 64 (4). pp. 888-894. ISSN 1318-0207

Chua, Lee Suan (2005) Chiral resolution of (R,S)-1-phenylethanol using immobilized lipases in batch stirred tank and recirculated packed bed reactors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chua, Lee Suan (1999) Synthesis of lauric acid ester using immobilized enzyme lipase in a recirculated packed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chua, Lee Suan and A. Rahaman, Norul Liza and Adnan, Nur Ardawati and Eddie Tan, Ti Tjih (2013) Antioxidant activity of three honey samples in relation with their biochemical components. Journal of Analytical Methods In Chemistry . ISSN 2090-8865

Chua, Lee Suan and Alias, Norma and Januari, Ristian and Mustaffa, Maizatul Nadirah and Ali, Akhtar and Ahmad Kamal, Mohamad Hidayad and Hayat, Imran (2016) Mathematical modeling for contour identification based on medicinal leaves and GIS images. Journal Teknologi, 78 (12-2). pp. 49-55. ISSN 0127-9696

Chua, Lee Suan and Lau, Cher Haan (2017) Reflux extraction and column chromatography for rosmarinic acid- rich fraction from orthosiphon stamineus. Natural Products Journal, 7 (1). pp. 30-36. ISSN 2210-3155

Chua, Lee Suan and Syed, Hidayathulla (2017) Phytochemical profile of fresh and senescent leaves due to storage for ficus deltoidea. Plant Biosystems, 151 (1). pp. 74-83. ISSN 1126-3504

Chua @ Chua Ching Kok, Mukhlis (2015) Application of ultrasonic guided wave for structural health monitoring of pipeline. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Chuah, Gary Yong Wei (2000) The effects of operating conditions to the extraction performance of composite solvent in the recycling of used lubricant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chuah, Wei Sze (2013) Segregated problem table algorithm for simultaneous targeting and design of integrated energy networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chuan, Chin Hooi and Krishnaiah, Kamatam and Michael Wong, Clemente and Janaun, Jidon (2006) Palm kernel cake as substrate for ß-Mannanase production by Bacillus subtilis ATCC3366 under submerged and solid state fermentations. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Chun, W. K. and Sean, G. P. and Ismail, A. F. (2016) Effect of pmma-mwnts loading on Co2 separation performance of thin film nanocomposite membrane. Jurnal Teknologi, 78 (12). pp. 39-45. ISSN 0127-9696

Chuo, Sing Chuong (2017) Extraction of amoxicilin and arythromycin utilising sophorolipids reversed micellar system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

D

David, Adekoya Oluwatobi (2016) Photoreduction of carbon dioxide to methanol using copper modified carbon nitride and titanium dioxide nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

D. Hamza, Usman and Nasri, Noor Shawal and Muhammad, Jibril and Abdul Majid, Zulkifli (2016) Natural gas adsorption on sustainable biomass derived activated carbon: a mini-review. In: 3rd International Conference on Chemical and Biological Sciences, 23-25 Mar, 2016, Amsterdam. Netherlands.

Dadum, Hamza Usman (2015) Palm-polyetheretherketone porous carbons as sorbents for gas adsorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dadum, Hamza Usman (2015) Palm-polyetheretherketone porous carbons as sorbents for gas adsorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dahalan, Farrah Aini (2012) Development and characterization of phototrophic aerobic granular sludge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dailin, Daniel Joe (2016) Bioprocess optimization for kefiran production by lactobacillus kefiranofaciens. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Dailin, Daniel Joe (2010) Optimization for the production of kefiran using lactobacillus kefiranofaceins in a bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Dailin, Daniel Joe and Harun, Nurulsyakina and Abd. Malek, Roslinda and Othman, Nor Zalina and El-Enshasy, Hesham Ali Metwally and Elsayed, Elsayed A. (2014) Optimization of polysaccharide productio by Lactobacillus kefiranofaciens using response surface methdology. In: 5th International on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Daneshfar, Aref (2014) The study of pH, temperature, reusability, and storage stabilty of urease immobilized on electrospun polyacrylonitrile mat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daneshfar, Aref and Matsuura, Takeshi and Emadzadeh, Daryoush and Pahlevani, Zahra and Ismail, Ahmad Fauzi (2015) Urease-carrying electrospun polyacrylonitrile mat for urea hydrolysis. Reactive and Functional Polymers, 87 . pp. 37-45. ISSN 1381-5148

Danial, Wan Hazman and Abdul Majid, Zaiton and Mohd. Muhid, Mohd. Nazlan and Bakar, Mohd. Bakri and Ramli, Zainab and Triwahyono, Sugeng (2015) Preparation of cellulose nanocrystal aerogel from wastepaper through freeze-drying technique. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference, 4-6 Feb, 2015, Indonesia.

Danlami, Jibrin Mohammed (2015) Supercritical carbon dioxide extraction of castor oil seed. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Danlami, Jibrin Mohammed and Ahmad Zaini, Muhammad Abbas and Arsad, Agus and Che Yunus, Mohd Azizi (2015) A parametric investigation of castor oil (Ricinus comminis L) extraction using supercritical carbon dioxide via response surface optimization. Journal of the Taiwan Institute of Chemical Engineers, 53 . pp. 32-39. ISSN 1876-1070

Danlami, Jibrin Mohammed and Zaini, Muhammad Abbas Ahmad and Arsad, Agus and CheYunus, Mohd. Azizi (2015) Solubility assessment of castor (Ricinus communis L) oil in supercritical CO<inf>2</inf> at different temperatures and pressures under dynamic conditions. Industrial Crops and Products, 76 . pp. 34-40. ISSN 0926-6690

Dasht Arzhandi, Masood Rezaei and Ismail, Ahmad Fauzi and Goh, Pei Sean and Wan Azelee, Ihsan and Abbasgholipourghadim, Mohammad and Ghani, Ur Rehman and Matsuura, T. (2016) Zeolite zsm5-filled pvdf hollow fiber mixed matrix membranes for efficient carbon dioxide removal via membrane contactor. Industrial and Engineering Chemistry Research, 55 (49). pp. 12632-12643. ISSN 0888-5885

DashtArzhandi, M. Rezaei and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Ng, Becheer and Abdullah, Mohd. Sohaimi (2015) Fabrication and characterization of porous polyetherimide/montmorillonite hollow fiber mixed matrix membranes for CO2 absorption via membrane contactor. Chemical Engineering Journal, 269 . pp. 51-59. ISSN 1385-8947

Dashti, M. G. and Abdeshahian, P. (2016) Batch culture and repeated-batch culture of Cunninghamella bainieri 2A1 for lipid production as a comparative study. Saudi Journal of Biological Sciences, 23 (2). pp. 172-180. ISSN 1319-562X

Dastan, Mohammadreza (2014) Photocatalytic reduction of carbon dioxide and methane to light hydrocarbons over nitrogen doped titanium dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, N. S. M. and Zaidel, D. N. A. and Song, L. K. and Jusoh, Y. M. M. and Muhamad, I. I. and Ya'akob, H. (2017) Microwave-Assisted stabilisation and storage stability study of rice bran oil from different varieties. Chemical Engineering Transactions, 56 . pp. 1285-1290. ISSN 2283-9216

Daud, Noorol Jannah (2012) Carbon footprint calculator for a typical campus in Malaysia using life cycle assessment approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, S. and Ahmad Noorden, A. F. (2016) Fibre bragg grating sensor system for temperature application. Jurnal Teknologi, 78 (3). pp. 39-42. ISSN 0127-9696

Daud, Suhardy (2002) Penentuan ringkas kandungan minyak dalam buah kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Davazdah Emami, S. and Kasmani, R. M. and Hamid, M. D. and Che Hassan, C. R. and Mokhtar, K. M. (2016) Kinetic and dynamic analysis of hydrogen-enrichment mixtures in combustor systems - a review paper. Renewable and Sustainable Energy Reviews, 62 . pp. 1072-1082. ISSN 1364-0321

David, L. I. B. and Ismail, A. F. (2003) Influence of the thermastabilization process and soak time during pyrolysis process on the polyacrylonitrile carbon membranes for O2/N2 separation. Journal of Membrane Science, 213 (1). pp. 285-291. ISSN 0376-7388

De Silva, R. T. and Soheilmoghaddam, M. and Goh, K. L. and Wahit, M. U. and Bee, S. A. H. and Chai, S. P. and Pasbakhsh, P. (2016) Influence of the processing methods on the properties of poly(lactic acid)/halloysite nanocomposites. Polymer Composites, 37 (3). pp. 861-869. ISSN 0272-8397

Dehghani, M. and Asghari, M. and Ismail, A. F. and Mohammadi, A. H. (2017) Molecular dynamics and Monte Carlo simulation of the structural properties, diffusion and adsorption of poly (amide-6-b-ethylene oxide)/Faujasite mixed matrix membranes. Journal of Molecular Liquids, 242 . pp. 404-415. ISSN 0167-7322

Delavari, Saeed and Nor Aishah, Saidina Amin (2014) Response surface methodology analysis of CO2 photocatalytic conversion in presence of CH4 over nitrogen-doped titania nanotube arrays. Chemical Engineering Transactions, 39 (Specia). pp. 235-240. ISSN 1974-9791

Delavari, Saeed and Saidina Amin, Nor Aishah (2016) Photocatalytic conversion of CO2 and CH4 over immobilized titania nanoparticles coated on mesh: optimization and kinetic study. Applied Energy, 162 . pp. 1171-1185. ISSN 0306-2619

Derahman, Mohd. Nawi and Leong Hooi, Tan (2007) Breaking of paradigm: gas-oil-contact (GOC) water injection. In: Improved Oil Recovery. Penerbit UTM , Johor. ISBN 978-983-52-0594-1

Derek, C. J. C. and Zulkali, M. M. D. and Ahmad, A. L. (2004) In-situ extracellular protein isolation of yarrowia lipolytica through membrane technology: A review. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Devanai, Kannan (2012) Modification of polyethersulfone incorporated with polyvinylpyrrolidone - iodine via phase inversion and ultraviolet photo grafting for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Din, Abdul Talib (1999) Kesan penggunaan enzim ke atas kualiti efluen loji rawatan kumbahan dan air sisa kilang kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Douglas, Peter L. and Croiset, Eric and Elkame, Ali and Alie, Colin and Shafeen, Ahmed and Hashim, Haslenda (2006) Carbon capture and storage from the boiler to the fleet - A canadian case study. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Dzinun, Hazlini and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Puteh, Mohd. Hafiz and A. Rahman, Mukhlis and Jaafar, Juhana (2017) Performance evaluation of co-extruded microporous dual-layer hollow fiber membranes using a hybrid membrane photoreactor. Desalination, 403 (SI). pp. 46-52. ISSN 0011-9164

Dzinun, Hazlini and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Puteh, Mohd. Hafiz and A. Rahman, Mukhlis and Jaafar, Juhana (2016) Photocatalytic degradation of nonylphenol using co-extruded dual-layer hollow fibre membranes incorporated with a different ratio of TiO2/PVDF. Reactive and Functional Polymers, 99 . pp. 80-87. ISSN 1381-5148

E

Emami, Sina Davazdah and Sulaiman, Siti Zubaidah and Md. Kasmani, Rafiziana and Hamid, Mahar Diana and Che Hassan, Che Rosmani (2016) Effect of pipe configurations on flame propagation of hydrocarbons-air and hydrogen-air mixtures in a constant volume. Journal of Loss Prevention in the Process Industries, 39 . pp. 141-151. ISSN 0950-4230

E-Alamaria, Abdulhakim M. Salem (2016) Synthesis and characterization of sago / polyvinyl alcohol blend pervaporation membrance for ethyl acetate recovery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Ee, Ting Wong and Kian, Hwa Chan and Irfan, Muhammad and Idris, Ani and Misran, Effaliza (2015) Enhanced removal of Cu(II) by photocatalytic reduction using maghemite PVA-alginate separable beads: kinetic and equilibrium studies. Separation Science and Technology (Philadelphia), 50 (4). pp. 487-494. ISSN 0149-6395

EI Enshasy, Hesham A. and Mohy EI Din, Mohamed S. and El Sayed, Mohamed and El Sayed, Salah and Haroun, Bakry M. and Hassan, Elsayed A. (2009) Optimization and scaling up of penicillin acylase production process by escherichia coli. World Applied Sciences Journal, 6 (10). pp. 1348-1358. ISSN 1818-4952

El Enshasy, H. and Malik, K. and Malek, R. A. and Othman, N. Z. and Elsayed, E. A. and Wadaan, M. (2016) Anaerobic probiotics: the key microbes for human health. In: Advances in Biochemical Engineering/Biotechnology. Springer Science and Business Media Deutschland GmbH, pp. 397-432. ISBN 07246145

El Enshasy, H. A. and Johari Masri, M. H. and Malek, R. A. and Othman, N. Z. and Leng, O. M. and Aziz, R. (2016) Bioprocess development for pleuran production by pleurotus ostreatus using submerged cultivation system in semi-industrial scale. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

El Enshasy, H. A. and Elsayed, E. A. (2017) Kinetics of cell growth and invertase production by the biotherapeutic yeast, Saccharomyces boulardii. Journal of Scientific and Industrial Research, 76 (8). pp. 477-484. ISSN 0022-4456

El Enshasy, Hesham A. and Othman, Nor Zalina and Abd. Malek, Roslinda and M. Awad, Hassan and Ramli, Solleh and Jalal, Yahya and Saat, Mohamad and Shah, Norman and Malek, Muhammad Khairuddin and Mohamad, Nor Hafizah and Sarmidi, Mohamad Roji and Aziz, Ramlan (2014) Development of techno-industrial platform for large scale production of biotechnology based for dengue control. In: 2nd International Conference on Dengue Fever Situation and its Control, 20-21 Sept, 2014, Skudai, Johor.

El Habbash, A. I. and Hashim, N. M. and Ibrahim, M. Y. and Yahayu, M. and Elmutaal Omer, F. A. and Rahman, M. A. and Nordin, N. and Lian, G. E. C. (2017) In vitro assessment of anti-proliferative effect induced by α-mangostin from Cratoxylum arborescens on HeLa cells. PeerJ, 2017 (7). ISSN 2167-8359

El Sayed Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd. Dahlan, Khairulzaman (2010) Radiation grafted poly(vinylidene fluoride)-graftpolystyrene sulfonic acid membranes for fuel cells: Structure-property relationships. Chinese Journal of Polymer Science (English Edition), 28 (5). 761 -770. ISSN 0256-7679

El-Hefian, Esam A. and El Sayed Nasef, Mohamed Mahmoud and Yahaya, Abdul Hamid (2011) The preparation and characterization of chitosan/poly (vinyl alcohol) blended films : mechanical, thermal and surface investigations. E-Journal of Chemistry, 8 (1). pp. 91-96. ISSN 0973-4945

El-Hefian, Esam A. and Nasef, Mohamed Mahmoud and Khan, Rashid Atta and Yahaya, Abdul Hamid (2012) Characterization of aqueous solutions of mixture of chitosan and agar. Journal Of The Chemical Society Of Pakistan, 34 (1). pp. 127-130. ISSN 0253-5106

El-hefian, Esam A. and Nasef, Mohamed Mahmoud and Yahaya, Abdul Hamid (2010) Rheological and morphological studies of chitosan/agar/ poly (vinyl alcohol) blends. Journal of Applied Sciences Research, 6 (5). 460 -468. ISSN 1816-157X

El-Hefian, Esam A. and Nasef, Mohamed Mahmoud and Yahaya, Abdul Hamid and Khan, Rashid Atta (2010) Preparation and characterization of chitosan/agar blends: rheological and thermal studies. Journal of The Chilean Chemical Society, 55 (1). 130 - 136. ISSN 0717-9707

El-Sayed Nasef, Mohamed Mahmoud (1996) Separation of CO2 from CO2/CH4 mixtures using hollow fiber membrane permeator : characterization of permeation performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Elakkiya, S. and Arthanareeswaran, G. and Ismail, A. F. and Das, D. B. (2017) Functionalization and surface modification of TiO2 nanoparticles for proton exchange membrane fuel cell. International Journal of Hydrogen Energy . ISSN 0360-3199 (In Press)

Elbatran, A. H. A. and Yaakob, O. B. and Ahmed, Y. M. and Abdullah, F. B. (2016) Augmented diffuser for horizontal axis marine current turbine. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 235-245. ISSN 2088-8694

Elfagaih, Fawzi Mohamed and Saidina Amin, Nor Aishah (2015) Influence of tin content on the texture properties and catalytic performance of bi-metallic Pt-Re and tri-metallic Pt-Re-Sn catalyst for n-octane reforming. Reaction Kinetics, Mechanisms and Catalysis, 114 (1). pp. 229-249. ISSN 1878-5190

Eljali, A. H. M. S. and Nainggolan, I. and Hashim, S. and Nasution, T. I. (2017) Improvement on alcohol Breath-Analyzer ethanol biosensor based on roselle-chitosan blend. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1154-1160.

Elmarzugi, Nagib Ali (2014) Preparation and evaluation of olive oil nanoemulgel. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Elochukwu, Okafor Henry (2013) Evaluation of asphaltene-induced formation damage around the near wellbore region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Elraies, Khaled Abdalla and Yunan, Mat Hussin (2007) Determination of water breakthrough time in noncommunicating layered reservoir. e-journal of reservoir engineering, 1 (1). ISSN 1715-4677

Elraies, Khaled Abdalla and Yunan, Mat Hussin (2008) Investigation of water breakthrough time in non-communicating layered reservoir. Journal of Chemical and Natural Resources Engineering, 3 . pp. 12-18. ISSN 1823-5255

Elraies, Khaled Abdalla (2007) Evaluation of improving oil recovery in WAHA reservoir by waterflooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Elsherif, Munier and Abdul Manan, Zainuddin and Kamsah, Mohd. Zaki (2015) State-of-the-art of hydrogen management in refinery and industrial process plants. Journal of Natural Gas Science and Engineering, 24 . pp. 346-356. ISSN 1875-5100

Elsiti, N. M. and Noordin, M. Y. and Idris, A. (2017) Effect of maghemite (γ-Fe2O3) nano-powder mixed dielectric medium on tool wear rate (TWR) during micro-EDM of CO-Cr-MO. Pertanika Journal of Science and Technology, 25 (3). pp. 847-858. ISSN 0128-7680

Emadzadeh, D. and Ghanbari, M. and Lau, W. J. and Rahbari-Sisakht, M. and Matsuura, T. and Ismail, A. F. and Kruczek, B. (2016) Solvothermal synthesis of nanoporous TiO2: the impact on thin-film composite membranes for engineered osmosis application. Nanotechnology, 27 (34). ISSN 0957-4484

Emadzadeh, D. and Ghanbari, M. and Lau, W. J. and Rahbari-Sisakht, M. and Rana, D. and Matsuura, T. and Kruczek, B. and Ismail, A. F. (2017) Surface modification of thin film composite membrane by nanoporous titanate nanoparticles for improving combined organic and inorganic antifouling properties. Materials Science and Engineering C, 75 . pp. 463-470. ISSN 0928-4931

Emadzadeh, Daryoush and Lau, Woei Jye and Rahbari-Sisakht, Masoud and Daneshfar, Aref and Ghanbari, M. and Mayahi, Alireza and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2015) A novel thin film nanocomposite reverse osmosis membrane with superior anti-organic fouling affinity for water desalination. Desalination, 368 . pp. 106-113. ISSN 0011-9164

Emami, S. D. and Kasmani, R. M. and Naserzadeh, Z. and Che Hassan, C. R. and Hamid, M. D. and Sulaiman, S. Z. and Ibrahim, N. and Samsudin, M. D. M. (2017) Effectiveness of diluent gases on hydrogen flame propagation in tee pipe (part II) – Influence of tee junction position. Fuel, 190 . pp. 260-267. ISSN 0016-2361

Emami, Sina Davazdah and Kasmani, Rafiziana Md. and Hamid, Mahar Diana and Cha Hassan, Che Rosmani and Sulaiman, Siti Zubaidah (2016) Effect of inhibitor gases on hydrogen flame propagation in a confined tee pipe (Part I). Fuel, 165 . pp. 50-58. ISSN 0016-2361

Endud, Salasiah and Mohd. Basir, Norsahika and Ramli, Zainab and Lintang, Hendrik Oktendy (2014) Structural, porosity and morphological changes of montmorillonite derived porous clay heterostructures prepared by the starch gel template method. In: 27th Regional Symposium of Malaysia Analytical Sciences (SKAM27) 2014, 8-10 Dec, 2014, Johor Bahru, Malaysia.

Eng, Wee Ean (2008) Pretreatment of instant coffee wastewater by coagulation and flocculation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Es Saheb, M. and Khan, S. M. A. and Mohsin, M. E. A. (2017) Fatigue behaviour of AA 7075-T6 plates repaired at different crack lengths. Chemical Engineering Transactions, 56 . pp. 1627-1632. ISSN 2283-9216

Esfeh, H. K. and Azarafza, A. and Hamid, M. K. A. (2017) On the computational fluid dynamics of PEM fuel cells (PEMFCs): an investigation on mesh independence analysis. RSC Advances, 7 (52). pp. 32893-32902. ISSN 2046-2069

Eteng, A. A. and Abdul Rahim, S. K. and Leow, C. Y. (2016) Numerical study on the distance-dependence of optimal loop size-ratios for inductive coupling links. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3117-3121. ISSN 1819-6608

Etesami, M. and Chandran, N. S. N. M. S. and Hussin, M. H. and Ripin, A. and Adnan, R. and Sujari, A. N. A. and Mohamed, N. (2016) Electrooxidation of nitrite ions on gold/polyaniline/carbon paste electrode. International Journal of Electrochemical Science, 11 (10). pp. 8332-8345. ISSN 1452-3981

Ezuan Mustafa, Mohd. Shahril and Hassan, Azman (2007) Enhancing toughness of polypropylene and polystyrene –application of styrene-b-ethylene-alt-butylenes-b-styrene. Journal of Chemical and Natural Resources Engineering, 1 . pp. 15-21. ISSN 823-5255

Ezzatzatzadegan, Leila (2011) Neuro fuzzy modeling of propylene polymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

F

Fadil, Y. and Man, S. H. C. and Jasinski, F. and Minami, H. and Thickett, S. C. and Zetterlund, P. B. (2017) Formation of homogeneous nanocomposite films at ambient temperature via miniemulsion polymerization using graphene oxide as surfactant. Journal of Polymer Science, Part A: Polymer Chemistry, 55 (14). pp. 2289-2297. ISSN 0887-624X

Fadli, Siti Norhanum (2007) Simulation and optimization of diesel autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Fadzil, A. F. A. and Alwi, S. R. W. and Manan, Z. A. and Klemes, J. J. (2017) Total site centralised water integration for efficient industrial site water minimisation. Chemical Engineering Transactions, 61 . pp. 1141-1146. ISSN 2283-9216

Fadzillah, N. A. and Rohman, A. and Salleh, R. A. and Amin, I. and Shuhaimi, M. and Farahwahida, M. Y. and Rashidi, O. and Aizat, J. M. and Khatib, A. (2017) Authentication of butter from lard adulteration using high-resolution of nuclear magnetic resonance spectroscopy and high-performance liquid chromatography. International Journal of Food Properties, 20 (9). pp. 2147-2156. ISSN 1094-2912

Faisal Ghazali, Mohd. Nazlee (2012) Cellulose degradation and electricity generation using Microbial Fuel Cell (MFC) by locally isolated gram negative bacillus. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 Jul 2012, Langkawi, Kedah.

Fakhari, A. and Rahmat, A. R. and Wahit, M. U. and Arjmandi, R. (2017) Bio-based hybrid polymers from vinyl ester resin and modified palm oil: Synthesis and characterization. International Polymer Processing, 32 (1). pp. 20-25. ISSN 0930-777X

Fakhari, Alireza and Rahmat, Abdul Razak and Wahit, Mat Uzir and Alsagayar, Zyad Salem and Mustapha, Siti Noor Hidayah (2015) Influence of nanoclay on mechanical properties of vinyl ester/acrylated epoxidized palm oil blends. In: Applied Mechanics and Materials, 2015.

Fakhari, Alireza and Rahmat, Abdul Razak and Wahit, Mat Uzir and Khalili, Amirali and Alsagayar, Zyad Salem (2015) Curing and mechanical properties of bio-based hybrid thermoset resins from unsaturated polyester and acrylated epoxidized palm oil. In: Advanced Materials Research, 2015.

Fakhari, Alireza and Rahmat, Abdul Razak and Wahit, Mat Uzir and Mustapha, Siti Noor Hidayah and Wan Tajulruddin, Wan Nurhayati (2015) Mechanical properties of hybrid thermosets from vinyl ester resin and acrylated epoxidized palm oil (AEPO). In: Applied Mechanics and Materials, 2015.

Fakhari, Alireza and Rahmat, Abdul Razak and Wahit, Mat Uzir and Yeong, Shoot Kian (2014) Synthesis of new bio-based thermoset resin from palm oil. Advanced Materials Research, 931-93 . pp. 78-82. ISSN 1022-6680

Fallahiarezoudar, E. and Ahmadipourroudposht, M. and Idris, A. and Yusof, N. M. (2017) Optimization and development of Maghemite (γ-Fe2O3) filled poly-L-lactic acid (PLLA)/thermoplastic polyurethane (TPU) electrospun nanofibers using Taguchi orthogonal array for tissue engineering heart valve. Materials Science and Engineering C, 76 . pp. 616-627. ISSN 0928-4931

Fallahiarezoudar, E. and Ahmadipourroudposht, M. and Idris, A. and Yusof, N. M. and Marvibaigi, M. and Irfan, M. (2016) Characterization of maghemite (γ-Fe2O3)-loaded poly-l-lactic acid/thermoplastic polyurethane electrospun mats for soft tissue engineering. Journal of Materials Science, 51 (18). pp. 8361-8381. ISSN 0022-2461

Fallahiarezoudar, E. and Ahmadipourroudposht, M. and Yusof, N. M. and Idris, A. and Ngadiman, N. H. A. (2017) 3D biofabrication of thermoplastic polyurethane (TPU)/poly-L-lactic acid (PLLA) electrospun nanofibers containing maghemite (γ-Fe2O3) for tissue engineering aortic heart valve. Polymers, 9 (11). ISSN 2073-4360

Fan, Yee Van (2016) Effectiveness of microbial inoculants from tempeh and tapai in home scale composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Fan, Yee Van and Lee, Chew Tin and Leow, Chee Woh and Chua, Lee Suan and Sarmidi, Mohamad Roji (2016) Physico-chemical and biological changes during co-composting of model kitchen waste, rice bran and dried leaves with different microbial inoculants. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1447-1457. ISSN 1394-2506

Fang, Fengzhou Z. and Venkatesh, Vasisht,C. and Zhang, G.X. (2002) Diamond turning of soft semiconductors to obtain nanometric mirror surfaces. International Journal of Advanced Manufacturing Technology, 19 (9). pp. 637-641. ISSN 0268-3768

Farad, Sagala and Mugisa, John and Alahdal, Hussein A. and Idris, Ahmad Kamal and Kisiki, Nsamba Hussein and Kabenge, Isa (2016) Effect of wettability on oil recovery and breakthrough time for immiscible gas flooding. Petroleum Science and Technology, 34 (20). pp. 1705-1711. ISSN 1091-6466

Farhan Kamaruzaman, Anis (2014) A levy flight particle swarm optimizer for machining performances optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Farzad, Reza Hashemi and Hassan, Azman and M. Piah, M. Afendi and Jawaid, Mohammad (2014) Electrical and flammability properties of alumina trihydrate filled polypropylene/ethylene propylene diene monomer composites as insulators in cable applications. Polymer Engineering and Science, 54 (3). pp. 493-498. ISSN 0032-3888

Fatah, N. A. A. and Triwahyono, S. and Jalil, A. A. and Salamun, N. and Mamat, C. R. and Majid, Z. A. (2017) n-Heptane isomerization over molybdenum supported on bicontinuous concentric lamellar silica KCC-1: Influence of phosphorus and optimization using response surface methodology (RSM). Chemical Engineering Journal, 314 . pp. 650-659. ISSN 1385-8947

Fathaddin, Muhammad Taufiq (2006) The application of lattice gas automata for simulating polymer injection porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Fathi Jasni, M. Jasmin (2012) Catalytic oxidative desulfurization of diesel fuel utilizing alumina supported cobalt manganese oxides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Fattahi, A. and Akhondzadeh, H. and Zare, A. R. and Derahman, Mohd. Nawi and Yunan, Mat Hussin (2012) Influence of lateral variation of permeability on steam assisted gravity drainage. In: Society Of Petroleum Engineers - Spe Heavy Oil Conference Canada 2012. Society of Petroleum Engineers, Canada, pp. 37-44. ISBN 978-162276111-1

Fattahi, A. and Zare, A. R. and Akhondzadeh, H. and Derahman, Mohd. Nawi and Yunan, Mat Hussin (2012) Optimization of SAGD in conductive fractured reservoir. In: Society of Petroleum Engineers - North Africa Technical Conference and Exhibition 2012, NATC 2012: Managing Hydrocarbon Resources in a Changing Environment. Society of Petroleum Engineers, Texas, pp. 1327-1335. ISBN 978-162276050-3

Fauzi, A. H. M. and Amin, N. A. S. (2013) Catalysis in biodiesel synthesis: challenges and future perspectives. In: Advances in Biofuels. Springer US, pp. 127-152. ISBN 978-146146249-1

Fauzi, A. H. M. and Mat, R. and Johari, A. (2014) In-situ transesterification reaction for biodiesel production. In: Biomass and Bioenergy: Applications. Springer International Publishing, pp. 89-105. ISBN 978-331907578-5

Fauzi, N. M. and Mohamad, Zurina (2015) Tensile properties and morphology of polyamide 6 (PA6)/ethylene vinyl acetate (EVA)/sepiolite nanocomposite. In: Applied Mechanics and Materials, 19-21 August, 2015, Kuala Lumpur, Malaysia.

Fauzi, Roslinda (2009) Synthesis of palm oil-based polyol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Fazli Abdul Samad, Noor Asma and Ahmad, Arshad (2006) Comparison product optimization performance of fed-batch fermentation processes for penicillin g production. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Febriyanti, Erna and Mukti, Rino R. and Suendo, Veinardi and Marsih, I. Nyoman and Triwahyono, Sugeng and Ismadji, Suryadi and Ismunandar, Ismunandar (2015) Synthesis of mesoporous silica particles with fibrous morphology via self-assembly process in microemulsion system. In: Advanced Materials Research, 10 Feb, 2015, Indonesia.

Fen, Lee Lih and Md.Illias, Rosli and Kamaruddin, Kamarulzaman and Maskat, Mohd Yusof and Hassan, Osman (2006) Development of rapid screening method for low-yielding chitosanase activity using Remazol Brilliant Blue-chitosan as substrate. Enzyme and Microbial Technology, 38 (1-2). pp. 215-219. ISSN Enzyme and Microbial Technology

Ferreira, Frederico and Ghazali, Nazlee Faisal and Cocchini, Ugo and Livingston, Andrew (2006) Rational approach to the selection of conditions for diastereomeric resolution of chiral amines by diacid resolving agents. Tetrahedron: Asymmetry, 17 (9). pp. 1337-1348. ISSN 0957-4166

Firdaus, F. and Noor-e-Iram, Noor-e-Iram and Khan, M. S. and Baig, U. (2016) Facile synthesis, characterization and photocatalytic activity of band gap engineered cobalt selenide nanoparticles. Arabian Journal for Science and Engineering, 41 (6). pp. 2377-2384. ISSN 1319-8025

FKKKSA, Dean (2006) Faculty of Chemical and Natural Resources Engineering Annual Report 2006. Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Fogg, Arnold G. and Ismail, Razali and Ahmad, Rahmalan and Willia, Sian L. and Zanonia, M. Valnice (1997) Discrete complexed ligand and catalytic nickel peaks in the differential pulse polarography and cathodic stripping voltammetry of Mordant Red 74. Microchemical Journal, 57 (1). pp. 110-114. ISSN 0026-265X

Foo, Chwan Yee (2002) Synthesis of mass exhange network for batch process system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Foo, Dominic C. Y. and Ng, Denny K. S. and Leong, Malwynn K. Y. and Chew, Irene M. L. and Subramaniam, Mahendran and Aziz, Ramlan and Lee, Jui-Yuan (2014) Targeting and design of chilled water network. Applied Energy, 134 . p. 599. ISSN 0306-2619

Foo, Jin Hoe and Noor Azizy, Noor Amira Syahida and Redzuan, Norizah and Zakaria, Khidzir (2015) Wettability effect and performance of nano-columnar DLC Coating via advancing sessile drop method in an ambient environmnet. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Foo, L. W. and Salleh, E. and Hana, S. N. (2017) Green extraction of antimicrobial bioactive compound from piper betle leaves: Probe type ultrasound-Assisted extraction Vs supercritical carbon dioxide extraction. Chemical Engineering Transactions, 56 . pp. 109-114. ISSN 2283 9216

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Selvan, Murugan and McGuire, Michael Lynn (2005) Integrate Process Simulation and Process Synthesis. Chemical Engineering Progress, CEP, 101 (10). pp. 25-29.

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Tan, Yin Ling (2006) Use Cascade Analysis to Optimize Water Network (Dept. of Chem Eng). Chemical Engineering Progress, 102 (7). pp. 45-52. ISSN 0360-7275

Fosi, Mohamoud Kofal and Mustafa, Azeman and Ismail, Ahmad Fauzi (2016) Development of novel surface modified poly (vinylidene fluoride ‐ co ‐ hexafluoropropylene) (PVDF ‐ HFP) membrane contactor for CO2 absorption. Journal of Scientific Research and Development, 3 (3). pp. 75-81. ISSN 1115-7569

Fukuda, Kanao and Hashimoto, Masaaki and Sugimura, Joichi (2013) Influences of trace water in hydrogen and argon on the tribological properties of pure iron. In: Proceedings Of The ASME/STLE International Joint Tribology Conference, IJTC 2012.

Fulazzaky, M. A. and Majidnia, Z. and Idris, A. (2017) Mass transfer kinetics of Cd(II) ions adsorption by titania polyvinylalcohol-alginate beads from aqueous solution. Chemical Engineering Journal, 308 . pp. 700-709. ISSN 1385-8947

Fulazzaky, M. A. and Nuid, M. and Aris, A. and Muda, K. (2017) Mass transfer kinetics of biosorption of nitrogenous matter from palm oil mill effluent by aerobic granules in sequencing batch reactor. Environmental Technology (United Kingdom) . pp. 1-11. ISSN 0959-3330 (In Press)

Fun, Hoong-Kun and Tze, Shyang Chia and Mahesh, Padaki and Isloor, Arun M. and Ismail, Ahmad Fauzi (2012) (2E)-3-(6-Meth­oxy­naphthalen-2-yl)-1-[4-(methyl­sulfan­yl)phen­yl]prop-2-en-1-one. Acta Crystallographica Section E-Structure Reports Online, 68 (7). pp. 2277-2278. ISSN 1600-5368

Furuyado, Mami and Ahmad Zaini, Muhammad Abbas and Aikawa, Masami and Amano, Yoshimasa and Machida, Motoi (2010) Adsorption of Cd(II) on activated carbon fiber prepared from polyacrylonitrile (PAN). Journal of Environmental Chemistry, 20 (4). pp. 379-384. ISSN 1869-1099

Fulazzaky, Mohamad Ali and Talaiekhozani, Amirreza and Hadibarat, Tony (2013) Calculation of optimal gas retention time using a logarithmic equation applied to a bio-trickling filter reactor for formaldehyde removal from synthetic contaminated air. RSC Advances, 3 (15). pp. 5100-5107. ISSN 2046-2069

G

Galadima, Ahmed Ibrahim (2013) Optimization of biobutanol production by clostridium species upm-a1 with liquid central composite design (ccd). Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Gan, H. S. and Karim, A. H. A. and Sayuti, K. A. and Tan, T. S. and Kadir, M. R. A. (2016) Analysis of parameters' effects in semi-automated knee cartilage segmentation model: Data from the osteoarthritis initiative. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Songkhla; Thailand.

Gan, Siaw Chin (2016) In vitro permeation and skin retention of alpha-mangostin proniosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ganjali Dashti, M. and Abdeshahian, P. and Sudesh, K. and Phua, K. K. (2016) Optimization of Salmonella Typhi biofilm assay on polypropylene microtiter plates using response surface methodology. Biofouling, 32 (4). pp. 477-487. ISSN 0892-7014

Garba, A. and Nasri, N. S. and Basri, H. and Ismail, R. and Abdul Majid, Z. D. and Hamza, U. and Mohammed, J. (2016) Adsorptive removal of phenol from aqueous solution on a modified palm shell-based carbon: fixed-bed adsorption studies. Desalination and Water Treatment, 57 (60). pp. 29488-29499.

Garba, A. and Nasri, N. S. and Basri, H. and Zain, H. M. and Hayatu, U. S. and Abdulrasheed, A. and Mohsin, R. and Majid, Z. A. and Rashid, N. M. (2017) Modelling of cadmium (II) uptake from aqueous solutions using treated rice husk: fixed - Bed studies. Chemical Engineering Transactions, 56 . pp. 229-234. ISSN 2283-9216

Garba, Abdurrahman and Basri, Hatijah and Nasri, Noor Shawal and Ismail, Razali (2016) Synthesis and characterization of porous carbon from biomass using KOH and K2CO3 chemical activation. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1613-1617. ISSN 1819-6608

Garba, N. N. and Ramli, A. T. and Saleh, M. A. and Sanusi, M. S. and Gabdo, H. T. and Aliyu, A. S. (2016) The potential health hazards of chronic exposure to low-dose natural radioactivity in Terengganu, Malaysia. Environmental Earth Sciences, 75 (5). pp. 1-12. ISSN 1866-6280

Ghadyani, G. and Rahmandoust, M. (2016) Computational nanomechanics investigation techniques. In: Advanced Computational Nanomechanics. wiley, pp. 99-122. ISBN 978-111906892-1

Ghaee, A. and Shariaty-Niassar, M. and Barzin, J. and Matsuura, T. and Fauzi Ismail, A. (2016) Preparation of chitosan/cellulose acetate composite nanofiltration membrane for wastewater treatment. Desalination and Water Treatment, 57 (31). pp. 14453-14460. ISSN 1944-3994

Ghanbari, M. and Emadzadeh, Daryoush and Lau, W. J. and Matsuura, Takeshi and Davoody, Meysam and Ismail, Ahmad Fauzi (2015) Super hydrophilic TiO2/HNT nanocomposites as a new approach for fabrication of high performance thin film nanocomposite membranes for FO application. Desalination, 371 . pp. 104-114. ISSN 0011-9164

Ghasemi, Mostafa and Wan Daud, Wan Ramli and Alam, Javed and Ilbeygi, Hamid and Sedighi, Mehdi and Ismail, Ahmad Fauzi and Yazdi, Mohammad H. and Aljlil, Saad A. (2016) Treatment of two different water resources in desalination and microbial fuel cell processes by poly sulfone/sulfonated poly ether ether ketone hybrid membrane. Energy, 96 . pp. 303-313. ISSN 0360-5442

Ghasemi, Mostafa and Wan Daud, Wan Ramli and Ismail, Manal and Rahimnejad, Mostafa and Ismail, Ahmad Fauzi and Jun, Xing Leong and Miskan, Madihah and Kien, Ben Liew (2013) Effect of pre-treatment and biofouling of proton exchange membrane on microbial fuel cell performance. International Journal of Hydrogen Energy, 38 (13). pp. 5480-5484. ISSN 0360-3199

Ghassemi, Payman (2011) Phosphoric acid membrane by radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetrafluoro ethylene) film followed by phosphorylation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ghavamian, A. and Rahmandoust, M. and Öchsner, A. (2016) Numerical nanomechanics of perfect and defective hetero-junction CNTs. In: Advanced Computational Nanomechanics. wiley, pp. 147-174. ISBN 978-111906892-1

Ghazali, N. F. and Pahlawi, Q. A. and Hanim, K. M. and Makhtar, N. A. (2017) Enzymatic hydrolysis of oil palm empty fruit bunch using membrane reactor. Chemical Engineering Transactions, 56 . pp. 1543-1548. ISSN 2283-9216

Ghazali, Nazlee Faisal and Ferreira, Frederico and White, Andrew J. P. and Livingston, Andrew (2006) Chiral separation by enantioselective inclusion complexation-organic solvent nanofiltration. Desalination , 199 (1-3). pp. 398-400. ISSN 0011-9164

Ghazali, Nazlee Faisal and Ferreira, Frederico C. and White, Andrew J. P. and Livingston, Andrew (2006) Enantiomer separation by enantioselective inclusion complexation-organic solvent nanofiltration. Tetrahedron: Asymmetry, 17 (2). pp. 1846-1852. ISSN 0957-4166

Ghazali, Siti Khairunisah (2017) Preparation and characterisation of hydrophobic ultraviolet-curable fluorinated polyurethane acrylate using ultraviolet-light emitting diode photopolymerisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ghazali, Siti Khairunisah and Adrus, Nadia and Jamaluddin, Jamarosliza (2014) Pineapple leaf fibers coated with polyacrylamide hydrogel. Applied Mechanics and Materials, 40 (1). pp. 1001-1012. ISSN 0272-8842

Ghazali, Siti Nadia Aini and Mohamad, Zurina (2015) The effect of sepiolite loading on tensile and thermal properties of low density polyethylene nanocomposite. In: Malaysian Polymer International Conference 2015, 10-11 Jun, 2015, Kuala Lumpur, Malaysia.

Ghazali, Siti Nadia Aini and Mohamad, Zurina (2015) Thermal and flammability properties of polypropylene filled rice bran/sepiolite composite. In: Applied Mechanics and Materials, 22-26 Sept, 2015, Kuala Lumpur, Malaysia.

Ghazali, Z. and Wan Nik, W. B. and Ku Bulat, K. H. and Ani, F. N. and Xian, L. F. (2006) The effect of light on the oxidative stability of palm olein. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ghosh, S. and Mishra, P. and Mohamad, S. N. H. and de Santos, R. M. and Iglesias, B. D. and Elorza, P. B. (2016) Discrimination of peanuts from bulk cereals and nuts by near infrared reflectance spectroscopy. Biosystems Engineering, 151 . pp. 178-186. ISSN 1537-5110

Goh, Kian Mau and Mahadi, Nor Muhammad and Hassan, Osman and Abdul Rahman, Raja Noor Zaliha Raja and Illias, Rosli Md (2007) The effects of reaction conditions on the production of γ-cyclodextrin from tapioca starch by using a novel recombinant engineered CGTase. Journal of Molecular Catalysis B: Enzymatic, 49 (1-4). p. 118. ISSN 1381-1177

Goh, Kin Mau and Mahadi, Nor Muhammad and Hassan, Osman and Rahman, Raja Noor Zaliha Raja Abdul and Illias, Rosli Md (2009) A predominant β-CGTase G1 engineered to elucidate the relationship between protein structure and product specificity. Journal of Molecular Catalysis B: Enzymatic, 57 (1-4). pp. 270-277. ISSN 1381-1177

Goh, Kian Mau (2008) Protein engineering and reaction manipulations of recombinant cyclodextrin glucanotransferase G1 for improvement of product specificity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Goh, Meng Seng (2009) Production of surfactant from oil palm shell for enchanced oil recovery processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Goh, Meng Seng and Awang, Mariyamni and LimXin, Yi and Ani, Farid Nasir (2006) Production of pyrolytic oil for enhanced oil recovery. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Goh, P. S. and Ismail, A. F. and Hilal, N. (2016) Nano-enabled membranes technology: sustainable and revolutionary solutions for membrane desalination? Desalination, 380 . pp. 100-104.

Goh, P. S. and Ismail, A. F. and Ng, B. C. (2017) Raman spectroscopy. In: Membrane Characterization. Elsevier Inc., pp. 31-46. ISBN 978-044463776-5

Goh, P. S. and Ismail, Ahmad Fauzi (2015) Review: is interplay between nanomaterial and membrane technology the way forward for desalination? Journal of Chemical Technology and Biotechnology, 90 (6). pp. 971-980. ISSN 0268-2575

Goh, P. S. and Matsuura, T. and Ismail, A. F. and Hilal, N. (2016) Recent trends in membranes and membrane processes for desalination. Desalination, 391 . pp. 43-60. ISSN 0011-9164

Goh, Pei Sean and Ismail, A. F. and Sanip, S. M. and Ng, B. C. and Aziz, M. (2011) Recent advances of inorganic fillers in mixed matrix membrane for gas separation separation. Separation and Purification Technology, 81 . pp. 243-264. ISSN 1383-5866

Goh, Pei Sean and Ismail, Ahmad Fauzi (2015) Graphene-based nanomaterial: the state-of-the-art material for cutting edge desalination technology. Desalination, 356 . pp. 115-128. ISSN 0011-9164

Goh, Pei Sean and Ismail, Ahmad Fauzi and Ng, Be Cheer (2013) Carbon nanotubes for desalination: performance evaluation and current hurdles. Desalination, 308 . pp. 2-14. ISSN 0011-9164

Goh, Pei Sean and Ng, B. C. and Ismail, Ahmad Fauzi and Aziz, M. and Hayashi, Y. (2012) Pre-treatment of multi-walled carbon nanotubes for polyetherimide mixed matrix hollow fiber membranes. Journal of Colloid and Interface Science, 386 (1). pp. 80-87. ISSN 0021-9797

Goh, Pei Sean and Ng, B. C. and Lau, Woei Jye and Ismail, Ahmad Fauzi (2015) Inorganic nanomaterials in polymeric ultrafiltration membranes for water treatment. Separation and Purification Reviews, 44 (3). pp. 216-249. ISSN 1542-2119

Gohari, Rasoul Jamshidi (2014) Novel ultrafiltration flat sheet mixed matrix membranes for arsenic and lead removal and fouling mitigation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Goto, Masahiro (2006) Protein biomass as new adsorbent for precious metal ions. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Gohari, R. Jamshidi and Lau, Woei Jye and Matsuura, Takeshi and Halakoo, Elnaz and Ismail, Ahmad Fauzi (2013) Adsorptive removal of Pb(ii) from aqueous solution by novel PES/HMO ultrafiltration mixed matrix membrane. Separation and Purification Technology, 120 . pp. 59-68. ISSN 1383-5866

H

Hadi Tan, Nuraimi Azlan (2017) Performance of microwave assisted aqueous enzymatic technique for elateriospermum tapos seed oil extraction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Hadi Tan, Nuraimi Azlan and Siddique, Bazlul Mobin and Muhammad, Ida Idayu and Fook, Seng Kok (2014) The effect of solvents on the Soxhlet extraction of omega 3 from perah oil. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 51-54. ISSN 2180-3722

Hassan, Azman and M. Alwaan, Ismaeel (2014) Pyrolysis, kinetic and kinetic model study of epoxidized natural rubber. Progress in Rubber Plastics and Recycling Technology, 30 (3). pp. 153-167. ISSN 1477-7606

H., Mimi (2003) Assessing inherent health hazard for proposed plants. Jurnal Teknologi F (39F). pp. 53-65. ISSN 0127-9696

H., Hanim and Fuad, M. Y. A. and R., Zarina and Ishak, Z. A. M. and Hassan, Azman (2008) Properties and structure of polypropylene/ Polyethylene-octene elastomer/nano CaCO 3 composites. Journal of Thermoplastic Composite Materials, 21 (2). pp. 123-140. ISSN 0892-7057

H. K., Farizul and S. Amin, Nor Aishah and D., Suhardy and S., Saiful Azhar (2007) Catalytic conversion of RBD palm oil to gasoline: the effect of silica-alumina ratio in HZSM-5. Jurnal Teknologi, 47 (F). pp. 55-67. ISSN 0127-9696 (Print); 2180-3722 (Electroniscs)

Hadi, Ahmad Maki (2013) Isolation and biodegradation of 3-chloropropionic acid by aspergillus aculeatinus strain M1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hadi, Binta Jume and Sanagi, Mohd. Marsin and Wan Ibrahim, W. A. and Jamil, Shajarahtunnur and AbdullahiMu’azu, Mohammed and Aboul Enein, Hassan Y. (2015) Ultrasonic-assisted extraction of curcumin complexed with methyl-beta-cyclodextrin. Food Analytical Methods, 8 (6). pp. 1373-1381. ISSN 1936-9751

Hadi, N. A. H. and Ahmad, A. and Abdullah, T. A. T. and Ripin, A. (2017) Flammability assessments of sonication process in organic mixture. Chemical Engineering Transactions, 56 . pp. 1393-1398. ISSN 2283-9216

Hadi, Nur and Prasetyoko, Didik and Ramli, Zainab and Endud, Salasiah (2004) Sulfation: A simple method to enhance the catalytic activity of TS-1 in epoxidation of 1-octene with aqueous hydrogen peroxide. Catalysis communications, 5 (12). pp. 725-728. ISSN 1566-7367

Hadibarata, Tony and Kristanti, Risky Ayu (2012) Effect of environmental factors in the decolorization of remazol brilliant blue R by polyporus sp. S133. Journal of the Chilean Chemical Society, 57 (2). ISSN 0717-9324

Hadibarata, Tony and Kristanti, Risky Ayu (2012) Fate and cometabolic degradation of benzo[a]pyrene by white-rot fungus armillaria sp. F022. Bioresource Technology, 107 . pp. 314-318. ISSN 0960-8524

Hadibarata, Tony and Kristanti, Risky Ayu and Fulazzaky, Mohamad Ali and Nugroho, Agung Endro (2012) Characterization of pyrene biodegradation by white-rot fungus polyporus SP. S133. Biotechnology and Applied Biochemistry, 59 (6). pp. 465-470. ISSN 0885-4513

Hadiwinoto, Dewi Dwirianti (2002) Membrane bioreactor for treatment of high-sulfate wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hadjar, S. A. (2011) Statical optimization of product of empty fruit bunch based charcoal for phenol removal : response surface methodology. In: International Chemical And Environmental Engineering Conference.

Hadzri, Edi Azali and Shamsudin, Amir Hamzah and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Abd. Aziz, Azian (2012) Effects of irregular cerebrospinal fluid production rate in human brain ventricular system. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 659-664. ISSN 0094-243X

Hafifi Abdullah, Mohd. Aliff (2013) Development of nitrocellulose based binder for ammonium perchlorate/aluminium solid propellant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hafiz, W. A. and Ismail, A. F. and Khoo, T. C. (2004) Effect of shear rate on the performance of membrane-assited lead acid battery. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Hafizan, A. M. and Wan Alwi, S. R. and Manan, Z. A. and Klemes, J. J. (2016) Optimal heat exchanger network synthesis with operability and safety considerations. Clean Technologies and Environmental Policy, 18 (8). pp. 2381-2400. ISSN 1618-954X

Hafizan, Ainur Munirah (2015) Optimal heat exchanger network synthesis with operability and safety consideration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hafizan, C. and Noor, Z. Z. and Abba, A. H. and Hussein, N. (2016) An alternative aggregation method for a life cycle impact assessment using an analytical hierarchy process. Journal of Cleaner Production, 112 . pp. 3244-3255. ISSN 0959-6526

Hafizan, Che and Zainon Noor, Zainura and Abba, Ahmad Halilu and Hussein, Norelyza (2016) An alternative aggregation method for a life cycle impact assessment using an analytical hierarchy process. Journal of Cleaner Production, 112 . pp. 3244-3255.

Haiyee, Zaibunnisa Abdul and Saim, Norashikin and Said, Mamot and Illias, Rosli Md. and Mustapha, Wan Aida Wan and Hassan, Osman (2008) Characterization of cyclodextrin complexes with turmeric oleoresin. Food Chemistry . ISSN 0308-8146

Hajar, S. and Rashid, M. and Nurnadia, A. and Ammar, M. R. (2015) The characteristics of a formulated filter aids for fabric filters. Powder Technology, 283 . pp. 315-320. ISSN 3259-10

Hakim Ismail, Lokman and Mohammad, Norazlina and Ahmad, Nazrun and Lee, Phe Ling and Ima-Nirwana, Ima-Nirwana (2008) Effects of vitamin E supplementation on bone metabolism in nicotine treated rats. In: Clinical Engineering and Its Application. Penerbit UTM , Johor, pp. 81-97. ISBN 978-983-52-0558-3

Halakoo, Elnaz (2013) Separation of reactive dyes using PES/SPEEK blend nanofiltration membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Halidan, Husna Aimi (2010) Prokaryotes biodiversity of Dusun Tua Hot Spring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Halim, N. A. A. and Ngadi, N. and Ibrahim, M. N. M. and Ansari, S. M. (2016) Monomeric structure characterization of different sources biomass lignin. Key Engineering Materials, 700 . pp. 42-49. ISSN 1013-9826

Halimoon, Hazwan (2014) Microbioreactor system with integrated mixing scheme, temperature control and optical density measurement for fermentation and biocatalysis experiments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Halimoon, Hazwan and Zainal Alam, Muhd Nazrul Hisham (2013) Prototyping of polymer based microbioreactors: micromachining by using poly(methyl methacrylate) and poly(dimethylsiloxane) polymer materials. Jurnal Teknologi (Science & Engineering), 63 (1). pp. 35-41. ISSN E–ISSN 2180–3722

Halimoon, Hazwan and Zainal Alam, Muhd Nazrul Hisham (2013) A low cost stirring platform with integrated temperature control scheme for microbioreactor operation. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 1-8. ISSN E-ISSN 2180-3722

ham, Weng Hong and Wahit, Mat Uzir and Abdul Kadir, Mohammed Rafiq and Wong, Tuck Whye (2013) Mechanical and thermal properties of biodegradable hydroxyapatite/poly(sorbitol sebacate malate) composites. Songklanakarin Journal of Science and Technology, 35 (1). pp. 57-61. ISSN 0125-3395

Hamdan, Halimaton and Navijanti, Vivin and Nur, Hadi and Muhid, Mohd Nazlan Mohd (2005) Fe(III)-salen encapsulated Al-MCM-41 as a catalyst in the polymerisation of bisphenol-A. Solid State Sciences, 7 (2). pp. 239-244. ISSN 1293-2558

Hamedi, M. and Salleh, S. H. and Samdin, S. B. and Noor, A. M. (2016) Motor imagery brain functional connectivity analysis via coherence. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Hamid, D. H. T. A. H. and Alias, N. and Omar, A. H. H. and Islam, M. R. and Saipol, H. F. S. and Palil, S. Q. M. and Ghani, A. C. A. and Ramli, N. (2014) Web-based service for collaborative authoring learning using grid portal. In: Open Source Technology: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 1860-1872. ISBN 978-146667231-4

Hamid, Kazemi Esfeh (2015) A computational fluid dynamic framework for modeling and simulation of proton exchange membrane fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamid, M. Y. S. and Firmansyah, M. L. and Triwahyono, S. and Jalil, A. A. and Mukti, R. R. and Febriyanti, E. and Suendo, V. and Setiabudi, H. D. and Mohamed, M. and Nabgan, W. (2017) Oxygen vacancy-rich mesoporous silica KCC-1 for CO2 methanation. Applied Catalysis A: General, 532 . pp. 86-94. ISSN 0926-860X

Hamid, N. N. A. and Martinez Hernandez, E. and Lim, J. . (2017) Technological screening of algae-based biorefinery for sustainable biofuels production using analytic hierarchy process (AHP) with feature scaling normalisation. Chemical Engineering Transactions, 61 . pp. 1369-1374. ISSN 2283-9216

Hamid, Mohd. Fauzi (1993) Kesan bahan tambah pelambat ke atas kekuatan mampatan dan ketertelapan simen. Buletin FKKKSA, 7(2) . pp. 8-11. ISSN 0128-0740

Hamidi, Hossein (2014) The ultrasonic waves effects on oil-water emulsification, coalescence, detachment, mobilization and viscosity in porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Hamidi, Hossein and Rafati, Roozbeh and Junin, Radzuan and Manan, Muhammad A. (2012) A role of ultrasonic frequency and power on oil mobilization in underground petroleum reservoirs. Journal of Petroleum Exploration and Production Technology, 2 (1). pp. 29-36. ISSN 2190-0558 (Print); 2190-0566 (Electronic)

Hamidon, N. H. and Zaidel, D. N. A. (2017) Effect of extraction conditions on pectin yield extracted from sweet potato peels residues using hydrochloric acid. Chemical Engineering Transactions, 56 . pp. 979-984. ISSN 2283-9216

Hammuda Aluhwal, Omar Kalifa and Junin, Radzuan and Nasri, Noor Shawal (2016) Surfactant alternating carbonated water (SACW) is a new process forenhanced oil recovery. In: International Conference on Science, Engineering, Management and Social Science (ICSEMSS 2016), 2016, Skudai, Johor.

Hamsani, M. N. and Liew, P. Y. and Walmsley, T. G. (2017) A new numerical approach for exergy targets and losses determination in sub-ambient processes. Chemical Engineering Transactions, 61 . pp. 1225-1230. ISSN 2283-9216

Hamza, U. D. and Nasri, N. S. and Amin, N. A. S. and Mohammed, J. and Zain, H. M. (2016) Microwave assisted K2CO3 palm shell activated carbon as sorbent for CO2 adsorption application. Jurnal Teknologi, 78 (8-3). pp. 127-136. ISSN 0127-9696

Hamza, U. D. and Nasri, N. S. and Mohammed, J. and Majid, Z. A. (2016) Natural gas adsorption on biomass derived activated carbons: A mini review. In: 3rd International Conference on Chemical and Biological Sciences, ICCBS 2016, 23 March 2016 through 25 March 2016, Netherlands.

Hamza, Usman D. and Nasri, Noor S. and S. Amin, Nor Aishah and Mohammed, Jibril and M. Zain, Husna (2016) Characteristics of oil palm shell biochar and activated carbon prepared at different carbonization times. Desalination and Water Treatment, 57 (17). pp. 7999-8006. ISSN 1944-3994

Hamzah, Afiqah (2013) Performance of flameless combustion using palm oil mill effluent biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Arulhaizal Adam (2011) Reliability assessment for liquefied natural gas ship's distributed control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Noor Nita Natayal (2009) Preparation and characterization of ENR-50/OMMT nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hamzah, Sofiah and Ali, Nora’aini and Mohd. Ariffin, Marinah and Mohamad, Abdul Wahab and Othman, Norasikin (2015) Adsorption of trypsin onto chitosan/Psf affinity membranes: Effects of physio-chemical environment. Jurnal Teknologi, 74 (7). pp. 1-6. ISSN 0127-9696

Hamzehalipour Almaki, J. and Nasiri, R. and Tet Soon, W. and Huyop, F. Z. (2016) Identification of novel bacterial species capable of degrading dalapon using 16S rRNA sequencing. Jurnal Teknologi, 78 (6). pp. 77-82. ISSN 0127-9696

Hanafi, M. M. M. and Afzan, A. and Yaakob, H. and Aziz, R. and Sarmidi, M. R. and Wolfender, J. L. and Prieto, J. M. (2017) In vitro pro-apoptotic and anti-migratory effects of Ficus deltoidea L. plant extracts on the human prostate cancer cell lines PC3. Frontiers in Pharmacology, 8 (DEC). ISSN 1663-9812

Hanafi, Nur H. and Hassim, Mimi Haryani and Yusuf, Mohd. R. M. (2015) Emission factor establishment for palm oil mill boiler. Journal of Engineering Science and Technology, 10 (4). pp. 50-60. ISSN 1823-4690

Hanani Zainuddin, Nurul Fatin (2010) Biodegradability and properties of polylactic acid/polycaprolactone/montmorillonite/metallocene linear low density polyethylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hanapi, S. Z. and Hatti-Kaul, R. and Aziz, R. and Othman, N. Z. and El-Enshasy, H. A. (2016) Screening for ligninolytic enzyme production by white rot fungi from Malaysia using different medium. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Hanapi, Siti Zulaiha and Hatti Kaul, Rajni and Aziz, Ramlan and El Henshasy, Hesham (2014) Bioremediation of industrial dyes: black reactive 5 and methylene blue by white rot fungus. In: 5th International Conference on Biotechnolgy for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Handan, Rabitah (2000) Portland cement-based solidification/stabilization for the treatment of industrial waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Handayani, T. P. and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2010) A new systematic method for optimal heat recovery networks design with minimum area and exergy loss. Journal of Applied Sciences, 10 (21). 2737 - 2740. ISSN 18125654

Handayani, Tri Pratiwi (2010) Maximizing annual saving per heat load approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hanifah, M. F. R. and Jaafar, J. and Othman, M. H. D. and Rahman, M. A. and Ismail, A. F. and Jing, C. S. and Aziz, F. and Salleh, W. N. W. and Yusof, N. and Aziz, M. and Thirmizir, M. Z. A. (2017) Morphological study of synthesized RGO/ Pt nanocomposites via facile chemical reduction method. Sains Malaysiana, 46 (4). pp. 629-635. ISSN 0126-6039

Hanifah, Mohamad Fahrul Radzi and Jaafar, Juhana and Aziz, Madzlan and Ismail, Ahmad Fauzi and Ahmad Thirmizir, Mohd. Zharif and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Yusof, Norhaniza (2016) Electrocatalytic study of efficient synthesized graphene nanosheets incorporated with pt nanoparticles for methanol oxidation reaction. Electroanalysis, 28 (1). pp. 222-226. ISSN 1040-0397

Hanifah, Mohamad Fahrul Radzi and Jaafar, Juhana and Aziz, Madzlan and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. and Ismail, Ahmad Fauzi and Jing, Chiong Sie and Aziz, Farhana and Salleh, W. N. W. and Yusof, N. and Thirmizir, M. Z. A. (2017) Morphological study of synthesized RGO/Pt nanocomposites via Facile Chemical Reduction Method. Sains Malaysiana, 46 (4). pp. 629-635. ISSN 0126-6039

Hanim, H. and Zurina, R. and Ahmad Fuad, M. Y. and Mohd. Ishak, Z. A. and Hassan, Azman (2008) The effect of calcium carbonate nanofiller on the mechanical properties and crystallisation behaviour of polypropylene. Malaysian Polymer Journal, 3 (1). pp. 38-50. ISSN 1823-7789

Hanim, S. A. M. and Malek, N. A. N. N. and Ibrahim, Z. (2017) Analyses of surface area, porosity, silver release and antibacterial activity of amine-functionalized, silver-exchanged zeolite NaY. Vacuum, 143 . pp. 344-347. ISSN 0042-207X

Hansen, Sune Balle and Olsen, Stig Irving and Ujang, Zaini (2014) Carbon balance impacts of land use changes related to the life cycle of Malaysian palm oil-derived biodiesel. International Journal of Life Cycle Assessment, 19 (3). pp. 558-566. ISSN 0948-3349

Hansen, Sune Balle and Olsen, Stig Irving and Ujang, Zaini (2012) Greenhouse gas reductions through enhanced use of residues in the life cycle of Malaysian palm oil derived biodiesel. Bioresource Technology, 104 . pp. 358-366. ISSN 0960-8524

Harisna, A. H. and Edbeib, M. F. and Adamu, A. and Hamid, A. A. A. and Wahab, R. A . and Widodo, Widodo and Huyop, F. (2017) In silico molecular analysis of novel L-specific dehalogenase from Rhizobium sp. RC1. Malaysian Journal of Microbiology, 13 (1). pp. 50-60. ISSN 2231-7538

Haron, Roslindawati (2007) Penghasilan dan penulenan separa pullulanase yang dihasilkan oleh Pseudomonas Thermotolerans yang dipencilkan daripada air rawatan sisa kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Haron, Saharudin (2008) Enzyme sensors for water pollution monitoring. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, pp. 148-169. ISBN 978-983-52-05965-10

Haron, Saharudin (1999) Penyelakuan prestasi membran gentian geronggang bagi sistem pemisahan gas secara kaedah berangka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Harruddin, Norlisa (2014) Extraction of reactive dye using new supported liquid membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Harruddin, Norlisa and Othman, Norasikin and Lim, Andeline Ee Sin and Raja Sulaiman, Raja Norimie Orimie (2015) Selective removal and recovery of Black B reactive dye from simulated textile wastewater using the supported liquid membrane process. Environmental Technology (United Kingdom), 36 (3). pp. 271-280. ISSN 0959-3330

Hartati, Hartati (2015) Pengekstrakan Swietenia mahagoni menggunakan karbon dioksida lampau genting dan potensi ekstrak sebagai penyembuh luka. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hartati, Hartati and Md. Salleh, Liza and Abd. Aziz, Azila and Che Yunus, Mohd. Azizi (2014) The effect of supercritical fluid extraction parameters on the Swietenia mahagoni seed oil extraction and its cytotoxic properties. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 51-53. ISSN 0127-9696

Hartati, Hartati and Md. Salleh, Liza and Che Yunus, Mohd. Azizi and Abd. Aziz, Azila (2014) Optimization of supercritical Co2 extraction of Swietenia mahagoni seed by response surface methodology. Jurnal Teknologi (Sciences and Engineering), 67 (1). pp. 15-20. ISSN 0127-9696

Hartati, Hartati and Md. Salleh, Liza and Ismail, Ahmad Ramdan and Che Yunus, Mohd. Azizi and Abd. Aziz, Azila (2014) Supercritical fluid extraction of swietenia mahagoni seed: antioxidant and antimicrobial activities. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 59-62. ISSN 2180-3722

Hartati, Hartati and Santoso, Mardi and Triwahyono, Sugeng and Prasetyoko, Didik (2013) Activities of heterogeneous acid-base catalysts for fragrances synthesis: a review. Bulletin of Chemical Reaction Engineering and Catalysis, 8 (1). pp. 14-33. ISSN 1978-2993

Harun, Noor Hafiza (2008) Kinetic study of chlorobenzene degradation by isolated microbes from wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Harun, Noor Hafiza and Abdul Aziz, Azila and Aziz, Ramlan (2015) Effect of number of steps on the quality of Eurycoma longifolia extract and cost efficiency of the extraction process. In: International Conference on Advances in Science, Engineering, Technology and Natural Resources (ICASETNR-15), 27-28 August, 2015, Kota Kinabalu, Malaysia.

Harun, Z. and Yunos, M. Z. and Yusof, K. N. and Shohur, M. F. and Lau, W. J. and Salleh, W. N. W. (2016) Optimization and characterization of polysulfone membranes made of zinc oxide, polyethylene glycol and eugenol as additives. Journal of Engineering Science and Technology, 11 (7). pp. 1001-1015. ISSN 1823-4690

Haruna, S. and Mohamad, S. E. and Jamaluddin, H. (2017) Potential of treating unsterilized Palm Oil Mill Effluent (POME) using freshwater microalgae. Pakistan Journal of Biotechnology, 14 (2). pp. 221-225. ISSN 1812-1837

Haryati, S. and Hamzah, A. B. and Goh, P. S. and Abdullah, M. S. and Ismail, A. F. and Bustan, M. D. (2017) Process intensification of seawater reverse osmosis through enhanced train capacity and module size \x96 Simulation on Lanzarote IV SWRO plant. Desalination, 408 . pp. 92-101. ISSN 0011-9164

Hasan, M. and Hassan, A. and Zakaria, Z. (2016) Poly(lactic acid) hybrid green composites. In: Biodegradable Green Composites. wiley, pp. 149-166. ISBN 978-111891106-8

Hasan, N. A. A. and Taib, M. R. B. and Ng, P. S. and Ho, W. S. (2017) Study of dispersion of HCl from waste-To-energy plant at different receptor and chimney height at Taman Beringin, Kuala Lumpur. Chemical Engineering Transactions, 56 . pp. 1723-1728. ISSN 2283-9216

Hasan, Nor Badzilah and Tan, Wei Yie and Mohd. Zain, Nor Azimah and Suhaimi, Mohd. Suardi (2015) Immobilization of Candida rugosa lipase in PVA-Alginate-sulfate beads for waste cooking oil treatment. Jurnal Teknologi, 74 (1). pp. 215-222. ISSN 2180-3722

Hasani, Nadia and Bakhary, Norhisham (2011) Detection of concrete spalling using changes in modal flexibility. Advanced Materials Research, 163-16 . pp. 2598-2602. ISSN 1022-6680

Hasani, Hamirosima (2007) Production Of Maltose By Using Enzymatic Starch Hydrolysis. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hasbullah, H. and Kumbharkar, S. and Ismail, Ahmad Fauzi and Li, K. (2012) Asymmetric hollow fibre membranes based on ring-substituted polyaniline and investigation towards its gas transport properties. Journal Of Membrane Science, 397 . pp. 38-50. ISSN 0376-7388

Hasbullah, H. and Kumbharkar, S. and Ismail, Ahmad Fauzi and Li, K. (2011) Preparation of polyaniline asymmetric hollow fiber membranes and investigation towards gas separation performance. Journal of Membrane Science, 366 (1-2). pp. 116-124. ISSN 0376-7388

Hasbullah, Hasrinah and Rasit Ali, Roshafima and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Sadikin, Aziatul Niza and Asli, Umi Aisah and Saleh, Khairul Aizat (2015) Experimental and numerical study on hydrogen enriched biogas explosion in tee-junction pipe. In: 2015 Global Engineering & Applied Science Conference, 2-4 Dec, 2015, Japan.

Hasbullah, Hasrinah and Sadikin, Aziatul Niza and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Adrus, Nadia and Asli, Umi Aisah and Wan Ab. Rahman, Wan Aizan and Rasit Ali, Roshafima and A. Majid, Rohah and Jamaluddin, Jamarosliza (2015) Biokomposit plastik pembungkusan mesra alam berasaskan serat kulit nenas. In: Seminar Industri Nanas 2015, 30 Nov - 1 Dec, 2015, Sarawak, Malaysia.

Hasbullah, Hasrinah and Sadikin, Aziatul Niza and Md. Kasmani, Rafiziana and Asli, Umi Aisah and Ibrahim, Norazana and Rasit Ali, Roshafima (2015) The effect of acid and alkali pre-treatment methods on pineapple peel waste for bio-ethanol production. In: Global Engineering & Applied Science Conference, 2-4 Dec, 2015, Japan.

Hasham, Rosnani and Hyun, Kyung Choi and Sarmidi, Mohamad Roji and Chang, Seo Park (2014) Ficus deltoidea extract protects hacat keratinocytes from UVB irradiation-induced inflammation. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Hasham, Rosnani and Kim, Da Sel and Abdul Hamid, Mariani and Kim, Sun Ki and Park, Chang Seo (2014) Comparison of ethnic variations in skin physiological conditions and stratum corneum lipid compositions among Malaysians, Koreans, and Vietnamese. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Hasham @ Hisam, Rosnani (2008) Optimization of processing parameters on the yield of oleoresin from zingiber zerumbet and its antibacterial activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hashemifard, S. A. and Ismail, A. F. and Matsuura, T. (2011) Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNT) as filler for gas separation: experimental. Journal of Colloid and Interface Science, 359 (2). pp. 359-70. ISSN 1095-7103

Hashemifard, S. A. and Ismail, Ahmad Fauzi and Matsuura, T. (2010) Prediction of gas permeability in mixed matrix membranes using theoretical models. Journal Of Membrane Science, 347 (1-2). 53 -61. ISSN 0376-7388

Hashemifard, Seyed Abdollatif (2011) Development and modelling of mixed matrix membranes incorporating large pore size clay for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Hashemifard, Seyed Abdollatif and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2010) A new theoretical gas permeability model using resistance modeling for mixed matrix membrane systems. Journal of Membrane Science, 350 (1-2). 259 - 268. ISSN 03767388

Hashim, F. S. and Yussof, H. W. and Zahari, M. A. K. M. and Illias, R. M. and Rahman, R. A. (2016) A factorial analysis study on enzymatic hydrolysis of fiber pressed oil palm frond for bioethanol production. In: 2nd International Conference on Advances in Renewable Energy and Technologies, ICARET 2016, 23 February 2016 through 25 February 2016, Putrajaya; Malaysia.

Hashim, F. S. and Yussof, H. W. and Zahari, M. A. K. M. and Rahman, R. A. and Illias, R. M. (2017) Physicochemical and morphological characterisation of the native and alkaline pre-Treated fibre pressed oil palm frond for fermentable sugars production. Chemical Engineering Transactions, 56 . pp. 1087-1092. ISSN 2283-9216

Hashim, Haslenda (2008) Carbon capture and sequestration. In: Advances in Process Systems Engineering. Penerbit UTM , Johor, pp. 63-78. ISBN 978-983-52-05965-7

Hashim, Haslenda (1999) Penggunaan analisis Exergi untuk menentukan potensi kecekapan loji karbon teraktif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim, Haslenda and Douglas, Peter and Croiset, Eric and Elkamel, Ali (2006) CO2 mitigation for a network of power plants using mathematical programming. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Optimization of large-scale rainwater harvesting system using mixed integer linear programming. In: 2nd International Conference on Water Resources (ICWR 2012), 5-9 Nov 2012, Langkawi, Kedah.

Hashim, Nor Izzati (2014) Effects of different serial fiber arrangements on microbending losses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashim, Shahrir (2012) Synthesis and characterization of polymer hydrogel composites based on poly acrylic acid grafted cotton microfiber. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 Mar 2012, Vistana Hotel, Penang.

Hashim, Shahrir and Hassan, Azman and Chew, Sau Yen (2003) Mechanical, chemical & flammability properties of ABS/PVC blends. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hashim, Siti Ernieyanti and Mohd. Sirat, Hasnah and Ismail, Intan Safinar and Matsuki, Siti Nurulhuda (2015) Chemical composition and in vitro antidiabetic activity of hornstedtia scyphifera (J.Koeniog) Steud. essential oils. In: International Conference on Natural Products 2015 (ICNP 2015), 24-25 Mar 2015, Johor Bahru, Johor.

Hashim, Yumi Zuhanis Has-Yun (2002) Effect of processing parameters on the turmeric oleoresin antioxidant activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim, Z. and Fukusaki, E. (2016) Metabolomics-based prediction models of yeast strains for screening of metabolites contributing to ethanol stress tolerance. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Hashim, Z. and Lanyau, T. A. and Farid, M. F. A. and Kassim, M. S. and Azhar, N. S. (2016) Fundamental approaches for analysis thermal hydraulic parameter for PUSPATI Research Reactor. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Hashim, Z. and Zaki, S. S. A. M. and Muhamad, I. I. (2017) Quality assessment of fried palm oils using fourier transform infrared spectroscopy and multivariate approach. Chemical Engineering Transactions, 56 . pp. 829-834. ISSN 2283-9216

Hashim Hassan, (2008) Chitosan based membranes for pervaporation separation of isopropanol - water mixtures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashim, Shahrir and Wan Abdul Rahman, Wan Aizan and Toh, Show Chong (2003) Design and process for producing silance-crosslinked polyolefin compound. Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Hasmi, Ahmad Hazlan (2013) Optimization of plastic mould conformal cooling for increasing production rate of plastic product. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasmida, M. N. and Md Salleh, Liza and A. R., Nur Syukriah and Ya’Akob, Harisun and Mohd Azizi, C. Y. and Abdul Majid, Fadzilah Adibah (2015) Total phenolic content and antioxidant activity of Quercus infectoria galls using supercritical CO2 extraction technique and its comparison with Soxhlet extraction. Pertanika Journal of Science and Technology, 23 (2). pp. 287-295. ISSN 0128-7680

Hassan, Azman and Abu Bakar, Aznizam and Wahit, Mat Uzir and Bee, Soo Tueen (2009) Structure-properties relationship of hybrid talc/calcium carbonate filled impact modified PVC composites. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Hassan, Hashim and Mohd Nawawi, Mohd Ghazali (2008) Chitosan as a membrane material for pervaporation separation of isopropanol-water mixtures. Jurnal Teknologi (49F). pp. 207-218. ISSN 0127-9696

Hassan, Onn and Mat, Ramli (2005) A Comparative Study Of Two Different Approaches In Teaching Thermodynamics. Thermodynamics . pp. 1-3. (Unpublished)

Hassan, A. and Balakrishn, H. and Akbari, A. (2011) Polylactic acid based blends, composites and nanocomposites. Advanced Structured Materials, 18 . pp. 361-396. ISSN 1869-8433

Hassan, A. and Hau, L. Y. and Hasan, M. (2017) Effect of ammonium polyphosphate on flame retardancy, thermal stability, and mechanical properties of unsaturated polyester/phenolic/montmorillonite nanocomposites. Advances in Polymer Technology, 36 (3). pp. 278-283. ISSN 0730-6679

Hassan, A. and Wee, Y. J. and Ahmad Johari, U. L. (2008) Impact strength of PVC-U - effect of calcium carbonate particles size. Journal of Chemical & Natural Resources Engineering, 2 . pp. 35-40. ISSN 1823-5255

Hassan, A. R. and Ali, Nora'aini and Abdull, Norhidayah and Ismail, A. F. (2007) A theoretical approach on membrane characterization: the deduction of fine structural details of asymmetric nanofiltration membranes. Desalination, 206 . pp. 107-126. ISSN 0011-9164

Hassan, Azman (2002) Toughness enhancement of polymers. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Hassan, Azman and Abu Bakar, Aznizam and Bee, Soo Tueen (2007) Mechanical properties of tale and calcium carbonate filled PVC. In: Regional Annual Fundamental Science Seminar, 2007.

Hassan, Azman and Arjmandi, Reza and Mohamad Kassim, Mohamad Haafiz (2015) Cellulose nanowhiskers reinforced green nanocomposites: some recent development. In: Advanced Materials Research, 2015.

Hassan, Azman and Othman, Norhayani and Wahit, Mat Uzir and Lim, Jian Wei and Rahmat, Abdul Razak and Mohd. Ishak, Zainal Ariffin (2006) Maleic anhydride polyethylene octene elastomer toughened polyamide 6/polypropylene nanocomposites : mechanical and morphological properties. Macromolecular Symposia, 239 (1). p. 191. ISSN 1022-1360

Hassan, Azman and Salema, A. A. and Ani, F. N. and Bakar, A. A. (2010) A review on oil palm empty fruit bunch fiber-reinforced polymer composite materials. Polymer Composites, 31 (12). 2079 - 2101. ISSN 0272-8397

Hassan, Azman and Sivaneswaran, K. (2002) The effect of rice husk ash fillers on processability of ABS impact modified PVC-U. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Hassan, Azman and Wahit, Mat Uzir and Sabet, Mazylar (2007) Modified effect of LDPE/EVA blend by electron beam irradiation. In: Regional Annual Fundamental Science Seminar (RAFSS 2007), 28-29 May 2007, Johor Bahru.

Hassan, Azman and Wong, Yean Jwu (2005) Mechanical properties of high impact Abs/Pc blends - effect of blend ratio. In: Simposium Polimer Kebangsaan 2005, 23-24 August 2005, Hotel Resident, UNITEN.

Hassan, H. and Mohd. Nawawi, M. G. (2008) Crosslinked chitosan membranes for pervaporation separation of isopropanol-water mixtures. Journal of Chemical and Natural Resources Engineering, 2 . pp. 24-34. ISSN 1823-5255

Hassan, Hashim (1995) Penghasilan membran gentian geronggang menggunakan spineret buatan tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan, N. and Idris, A. (2016) Simultaneous saccharification and fermentation of lactic acid from empty fruit bunch at high solids loading. BioResources, 11 (2). pp. 3799-3812. ISSN 1930-2126

Hassan, N. and Idris, A. and El Enshasy, H. A. and Malek, R. A. (2017) Scaling-up of simultaneous saccharification and fermentation of lactic acid from microwave-alkali-treated empty fruit bunches. BioResources, 12 (4). pp. 8001-8013. ISSN 1930-2126

Hassan, N. D. and Muhamad, I. I. (2017) Drying and preservation of phytochemicals from elateriospermum tapos seed oil using combination of freeze drying and microwave technique. Chemical Engineering Transactions, 56 . pp. 1003-1008. ISSN 2283-9216

Hassan, Nor Diana (2009) The effect of copigmentation on the stability of butterfly pea anthocyanins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hassan, Nor Diana and Muhamad, Ida Idayu and Sarmidi, Mohamad Roji (2014) The effect of copigmentation on the stability of butterfly pea anthocyanins. Advanced Materials Engineering and Technology II, 594-59 . pp. 245-249. ISSN 1013-9826

Hassan, Nor Diana and Muhamad, Ida Idayu and Sarmidi, Mohammad Roji (2013) The effect of copigmentation on the stability of butterfly pea anthocyanins. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov, 2013, Bandung, Indonesia.

Hassan, Syaiful Nizam (2006) Recovery of spent bleaching clay for reuse in water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hassan Othman, Othman Mohsen (1995) Magnesium sacrificial anode behaviour at elevated temperatures in different environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan, Nursia (2007) Production of recombinant Chitinase from Trichoderma virens Ukm-1 in E.Coli. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hassim, M. H. (2008) Estimating air volumetric flow rate of outdoor chemical plants for occupational health hazards assessment. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 28-39. ISSN 1823-5255

Hassim, M. H. and Liew, W. H. and Ng, D. K. S. (2015) Overview of safety and health assessment for biofuel production technologies. In: Process Development and Resource Conservation for Biomass Conversion. Wiley Blackwell, pp. 341-357. ISBN 978-111869914-0

Hassim, Mimi Haryani (2016) Comparison of methods for assessing occupational health hazards in chemical process development and design phase. Current Opinion in Chemical Engineering, 14 (2016). pp. 137-149. ISSN 2211-3398

Hassim, Mimi Haryani and Hurme, Markku (2010) Occupational chemical exposure and risk estimation in process development and design. Process Safety and Environmental Protection, 88 (4). 225 - 235. ISSN 0957-5820

Hassim, Mimi Haryani and Hurme, Markku and Amyotte, Paul R. and Khan, Faisal I. (2012) Fugitive emissions in chemical processes: the assessment and prevention based on inherent and add-on approaches. Journal of Loss Prevention in the Process Industries, 25 (5). pp. 820-829. ISSN 0950-4230

Hassim, Mimi Haryani and Hurme, Markku and Edwards, David W. and Aziz, Nik N. N. A. and Rahim, Fariha L. M. (2013) Simple graphical method for inherent occupational health assessment. Process Safety and Environmental Protection . ISSN 0957-5820

Hassim, Mimi Haryani and Liew, Weng Hui and Ng, Denny K. S. (2014) Review of evolution, technology and sustainability assessments of biofuel production. Journal of Cleaner Production, 71 . pp. 11-29.

Hassim, Mimi Haryani and Mohd. Mokhtar, Mutahharah and Mohamad Rahim, Fariha Liana (2015) Ambient air monitoring study due to incineration of medical waste. In: 5th International Conference on Environment (ICENV2015), 18-19 Aug, 2015, Pulau Pinang, Malaysia.

Hayatu, U. S. and Nasri, N. S. and Zain, H. M. and Bdulrahman, A. A. and Rashid, N. M. (2017) Methane adsorption on KOH microwave treated porous carbon from sustainable coconut solid waste material. Chemical Engineering Transactions, 61 . pp. 1249-1254. ISSN 2283-9216

Hebbar, R. S. and Isloor, A. M. and Ismail, A. F. (2017) Contact angle measurements. In: Membrane Characterization. Elsevier Inc., pp. 219-255. ISBN 978-044463776-5

Hebbar, R. S. and Isloor, A. M. and Zulhairun, A. K. and Sohaimi Abdullah, M. and Ismail, A. F. (2017) Efficient treatment of hazardous reactive dye effluents through antifouling polyetherimide hollow fiber membrane embedded with functionalized halloysite nanotubes. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 244-252. ISSN 1876-1070

Hebbar, Raghavendra S. and Isloor, Arun M. and Ismail, Ahmad Fauzi and Shilton, Simon J. and Obaid, Abdulrahman and Hoong, Kun Fun (2015) Probing the morphology and anti-organic fouling behaviour of a polyetherimide membrane modified with hydrophilic organic acids as additives. New Journal of Chemistry, 39 (8). pp. 6141-6150. ISSN 1144-0546

Heidari, Mehdi (2012) Mechanical properties of calcium carbonate and coconut shell filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Heidarpour, Raheleh (2014) Effect of graphene on mechanical properties and flame retardancy of polycarbonate/ acrylonitrile butadiene styrene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Helmi Atta, Md. Nur and Mat, Shabudin and Perumal, Kannan (2016) Wind tunnel test of UTM sport complex. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 25 . pp. 19-30. ISSN 2289-7879

Heng, Han Yann (2005) Development of a rule-based fault diagnostic advisory system for precut fractionation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Heng, Han Yann and Ali, Mohamed Wijayanuddin and Kamsah, Mohd. Zaki (2007) Fault diagnostic advisory system using moving-range chart and hazard operability study. Journal of Chemical and Natural Resources Engineering, 1 . pp. 50-70. ISSN 1833-5255

Herawan, Safarudin Gazali (2000) Preparation of carbon molecular sieve from oil palm shell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Herianto, Herianto (2008) Penggunaan ciri-ciri akustik dalam penentuan sifat-sifat batuan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) The effect of nanoparticles on gastrointestinal release from modified K-carrageenan nanocomposite hydrogels. Carbohydrate Polymers, 89 (1). pp. 138-145. ISSN 0144-8617

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) Effect of natural cross-linker on swelling and structural stability of kappa-carrageenan/hydroxyethyl cellulose pH-sensitive hydrogels. Korean Journal of Chemical Engineering, 29 (11). pp. 1647-1655. ISSN 0256-1115

Hezaveh, Hadi and Muhamad, Ida Idayu and Noshadi, Iman and Fen, Lim Shu and Ngadi, Norzita (2012) Swelling behaviour and controlled drug release from cross-linked kappa-carrageenan/NaCMC hydrogel by diffusion mechanism. Journal of Microencapsulation, 29 (4). pp. 368-379. ISSN 0265-2048

Hii, King Kui (2002) A study of Co-MnO/y-A12O3 and Ca-MnO/y-A12O3 catalysts for CH4-CO2 reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hii, Siew Mee (2013) Sequence analysis of starch degrading enzymes from anoxybacillus species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hii, Wang Sing (2014) Production of valuable enzymes through fermentation of tropical fruit dregs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Hirzin, Radin Siti Fazlina Nazrah (2004) Semi-jaringan polimer saling menusuk (Semi-IPN) berasaskan getah asli melalui teknik sinaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hitam, C. N. C. and Jalil, A. A. and Triwahyono, S. and Ahmad, A. and Jaafar, N. F. and Salamun, N. and Fatah, N. A. A. and Teh, L. P. and Khusnun, N. F. and Ghazali, Z. (2016) Synergistic interactions of Cu and N on surface altered amorphous TiO2 nanoparticles for enhanced photocatalytic oxidative desulfurization of dibenzothiophene. RSC Advances, 6 (80). pp. 76259-76268. ISSN 2046-2069

Ho, Kek Sian (2002) Purification and characterization of cyclodextrin glucanotransferase from bacillus sp. G1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ho, Kek Sian and Said, M. and Hassan, O. and Kamaruddin, K. and Ismail, A. F. and A. Rahman, R and Nik Mahmood, N. A. and Md. Illias, R (2005) Purification and characterization of cyclodextrin glucanotransferase from alkalophilic Bacillus sp. G1. Process Biochemistry, 40 . pp. 1101-1111.

Hoe, Then Kek and Sarmidi, Mohamad Roji and Syed Alwee, Sharifah Shahrul Rabiah and Zakaria, Zainul Akmar (2016) Recycling of oil palm empty fruit bunch as potential carrier for biofertilizer formulation. Jurnal Teknologi, 78 (2). pp. 165-170. ISSN 0127-9696

Hokmabadi, Mehrdad (2013) Applications of carbon dioxide for heavy oil enhanced oil recovery via vapour extraction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Homayoonfal, Maryam and Mehrnia, Mohammad Reza and Niassar, Mojtaba Shariaty and Akbari, Ahmad and Sarrafzadeh, Mohammad Hossein and Ismail, Ahmad Fauzi (2015) Fabrication of magnetic nanocomposite membrane for separation of organic contaminant from water. Desalination and Water Treatment, 54 (13). pp. 3603-3609. ISSN 1944-3994

Hong, Heng See and Stratza, Simone and Hausera, Peter C. (2013) Electro-driven extraction across a polymer inclusion membrane in a flow-through cell. Journal of Chromatography A, 1300 . pp. 79-84. ISSN 0376-7388

Hoo, P. Y. and Hashim, H. and Ho, W. S. and Tan, S. T. (2017) Potential biogas generation from food waste through anaerobic digestion in peninsular Malaysia. Chemical Engineering Transactions, 56 . pp. 373-378. ISSN 2283-9216

Hoo, P. Y. and Hashim, H. and Ho, W. S. and Tan, S. T. (2017) Successful biogas implementation - A mini-review on biogas utilization, energy policies and economic incentives. Chemical Engineering Transactions, 61 . pp. 1495-1500. ISSN 2283-9216

Hordri, N. F. and Yuhaniz, S. S. and Shamsuddin, S. M. and Ali, A. (2017) Hybrid biogeography based optimization—multilayer perceptron for application in intelligent medical diagnosis. Advanced Science Letters, 23 (6). pp. 5304-5308. ISSN 1936-6612

Hossain, K. A. and Jaafar, M. N. M. and Ani, F. N. and Mustafa, A. (2003) Small-Scale Application of Urea Based Selective Non-Catalytic Reduction of Nitric Oxide in Diesel Burning Effluent. Proceedings of the Regional Symposium on Chemical Engineering 2003 . C2-1.

Hossain, K. A. and Jaafar, M. N. M. and Mustafa, A. and Ani, F. N. (2004) Application of Urea Based Selective Non-Catalytic Reduction of Nitric Oxide in the Combustion Effluent Containing Low Concentration of NOx. Proceeding of 2nd BSME-ASME International Conference on Thermal Engineering .

Hossain, Khandoker Abul and Mohd. Jaafar, Mohammad Nazrim and Mustafa, Azeman and Ani, Farid Nasir (2005) Application Of Commercial Grade Ammonia Liquor In The Selective Non-Catalytic Reduction Of Nox In Combusted Gas From A Diesel Burner. Jurnal Teknologi (42A). pp. 107-118. ISSN 0127-9696

Hossain, Shakil Imam and Hasan, Mahbub M. and Hasan, Md. Nazmul and Hassan, Azman (2013) Effect of chemical treatment on physical, mechanical and thermal properties of ladies finger natural fiber. Advances In Materials Science and Engineering . ISSN 1687-8434

Hosseini, Seyed Ehsan and Salehirad, Saber and Wahid, M. A. and Mohd. Sies, Mohsin and Saat, Aminuddin (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1309-1312. ISSN 0094-243X

Hosseini, Soraya and Abdul Rashid, Suraya and Abbasi, Ali and Eghbali Babadi, Farahnaz and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2016) Effect of catalyst and substrate on growth characteristics of carbon nanofiber onto honeycomb monolith. Journal of the Taiwan Institute of Chemical Engineers, 59 . pp. 440-449. ISSN 1876-1070

Hosseinnia, A. and Chan, G. F. and Rashid, N. A. A. and Abdul-Wahab, M. F. (2017) Microaerophilic and anaerobic decolorization of AZO dye in rich and minimal media by citrobacter sp. Strain L17. Jurnal Teknologi, 79 (4). pp. 81-86. ISSN 0127-9696

Hosseinnia, Ali (2014) Simultaneous azo dye degradation and biohydrogen production by strain L17 form gastrointestinal origin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Hua, Y. and Yang, B. and Lee, C. T. and Xu, Z. (2017) A novel thinner mechanical keyboard key based on the slider rocker mechanism. Recent Patents on Engineering, 11 (3). pp. 227-231. ISSN 1872-2121

Hubadillah, S. K. and Harun, Z. and Othman, M. H. D. and Ismail, A. F. and Salleh, W. N. W. and Basri, H. and Yunos, M. Z. and Gani, P. (2016) Preparation and characterization of low cost porous ceramic membrane support from kaolin using phase inversion/sintering technique for gas separation: effect of kaolin content and non-solvent coagulant bath. Chemical Engineering Research and Design, 112 . pp. 24-35. ISSN 0263-8762

Hubadillah, Siti Khadijah and Othman, Mohd. Hafiz Dzarfan and Harun, Zawati and Ismail, Ahmad Fauzi and A. Rahman, Mukhlis and Jaafar, Juhana (2017) A novel green ceramic hollow fiber membrane (CHFM) derived from rice husk ash as combined adsorbent-separator for efficient heavy metals removal. Ceramics International, 43 (5). pp. 4716-4720. ISSN 0272-8842

Hubadillah, Siti Khadijah and Othman, Mohd. Hafiz Dzarfan and Harun, Zawati and Ismail, Ahmad Fauzi and Iwamoto, Yuji and Honda, Sawao and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd. Sokri, Mohd. Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42 (14). pp. 15547-15558. ISSN 0272-8842

Hubadillah, Siti Khadijah and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Rahman, Mukhlis A. and Jaafar, Juhana (2017) The feasibility of kaolin as main material for low cost porous ceramic hollow fibre membrane prepared using combined phase inversion and sintering technique. Jurnal Teknologi, 79 (1-2). pp. 35-39. ISSN 0127-9696

Humaidi, Syahrul (2000) The sensitivity of ceramic gas sensor based on SnO2-Nb2O5-CuO system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hun, Lee Ting and Wani, Waseem A. and Poh, Heng Yong and Baig, Umair and Tan, Eddie Ti Tjih and Nashiruddin, Noor Idayu and Ling, Yong Ee and Abdul Aziz, Ramlan (2016) Gel electrophoretic and liquid chromatographic methods for the identification and authentication of cave and house edible birds nests from common adulterants. Analytical Methods, 8 (3). pp. 526-536. ISSN 1759-9660

Husin, M. F. and Hassim, M. H. and Ng, D. K. S. (2017) A heuristic framework for process safety assessment during research and development design stage. Chemical Engineering Transactions, 56 . pp. 739-744. ISSN 2283-9216

Husin, M. R. and Arsad, A. and Suradi, S. S. and Alothman, O. and Ngadi, N. and Kamaruddin, M. J. (2017) Fourier transforms infrared spectroscopy and X-ray diffraction investigation of recycled polypropylene/polyaniline blends. Chemical Engineering Transactions, 56 . pp. 1015-1020. ISSN 2283-9216

Husin, Muhamad Rasyidi (2012) Hydroxyapatite and montmorillonite filled high density polyethylene hybrid composites for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Husin, Muhamad Rasyidi and Arsad, Agus and Alothman, Othman Y. (2015) Synthesis of nano-polyaniline using different ultrasonic wave. In: Applied Mechanics and Materials, 2015.

Husin, Muhamad Rasyidi and Arsad, Agus and Mat Desa, Mohd. Shaiful Zaidi and Abdul Rahman, Mohd. Faizal (2015) Influence of nano-polyaniline contents on mechanical properties of crosslink recycled polypropylene polyaniline. In: Advanced Materials Research, 2015.

Husin, Muhamad Rasyidi and Wahit, Mat Uzir and Abdul Kadir, Mohamed Rafiq and Wan Abd. Rahman, Wan Aizan (2011) Effect of hydroxypatite reinforced high density polyethylene composites on mechanical and bioactivity properties. Key Engineering Materials, 471-47 . pp. 303-308. ISSN 1013-9826

Husin, Nurdiyana (2007) Physicochemical and Biochemical Characterisation Of Perah Seed Or Tapos. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hussain, A. and Ani, F.N. and Darus, A.N. and Mustafa, A. (2005) Experimental And Computational Studies Of The Hydrodynamics Of The Riser Of A Circulating Fluidized Bed. Proceeding of Brunei International Conference on Engineering and Technology 2005 (BICET 2005) . pp. 1-10.

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Mokhtar, Hamdan and Azam, Saiful and Mustafa, Azeman (2006) Themochemical behaviour of empty fruit bunches and oil palm shell waste in a circulating fluidized-bed combustor (CFBC). Journal of Oil Palm Research, 18 . pp. 210-218. ISSN 1511-2780

Hussain, A. and Ani, F. N. and Darus, A. N. and Nik, W. B. W. and Mustafa, A. and Salema, A. (2004) Simulation of gas-solid flow behaviour in the riser section of a circulating fluidized bed using computational fluid dynamics software. Proceeding of The Joint International Conference on "Sustainable Energy and Environment (SEE)" . pp. 1-5.

Hussain, Ahmad and Nasir Ani, Farid and Darus, Amer Nordin and Ahmad, Zainal and Mustafa, Azeman (2005) Turbulence modeling in the riser of a circulating fluidized bed using CFD sottware. The Malaysian Journal of Analytical Sciences, 9 (3). pp. 418-425. ISSN 1394-2506

Hussain, Mohd. Azlan and Abdul Manan, Zainuddin and Aziz, Norashid (2012) Recent developments on PSE education and research in Malaysia. Computer Aided Chemical Engineering, 31 . pp. 70-74. ISSN 1570-7946

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Ahmed, Zainal (2006) Thermogravimetric and thermochemical studies of Malaysian oil palm shell waste. Jurnal Teknologi A (45A). pp. 43-53. ISSN 0127-9696

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Mustafa, Azeman and Salema, Arshad A. (2005) Simulation Studies of Gas-Solid in the Riser of a Circulating Fluidized Bed. Proceeding of Fluidized Bed Combustion 2005 . pp. 1-7. (Submitted)

Hussein, Norelyza (2007) Adherence of lithocarpusspp(manjakani)and chlorpheraminein tablet dosage form on mammalian oesophagus. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Hussin, F. and Lintang, H. O. and Lee, S. L. and Yuliati, L. (2017) Photocatalytic synthesis of reduced graphene oxide-zinc oxide: effects of light intensity and exposure time. Journal of Photochemistry and Photobiology A: Chemistry, 340 . pp. 128-135. ISSN 1010-6030

Hussin, N. A. E. and Kidam, K. and Johari, A. and Hashim, H. (2017) Suitability analysis of corrective actions to prevent major chemical process accidents. Jurnal Teknologi, 79 (3). pp. 97-106. ISSN 0127-9696

Hussin, Nor Afina Eidura and Kidam, Kamarizan and Shahlan, Siti Suhaili and Johari, Anwar and Hashim, Haslenda (2015) Lessons learned from process equipment failures in the chemical process industry. Jurnal Teknologi, 75 (6). pp. 43-52. ISSN 2180-3722

Hussin, S. H. and Mohd. Setapar, S. H. and Che Yunus, M. A. and Mohamad Aziz, S. N. and Harun, N. H. and Atta, M. (2011) Modified sba-15 and mcm-41 onto protein adsorption assisted ultrasonic. In: International Conference On Chemical Innovation, 2011 (ICCI 2011).

Hussin, Siti Hasmah (2013) Adsorption of bovine serum albumin onto immobilized cobalt microporous and mesoporous silica adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Huyop, Fahrul and Cooper, Ronald (2012) Degradation of millimolar concentration of the herbicide dalapon (2,2-dichloropropionic acid) by rhizobium sp. Isolated from soil. Biotechnology and Biotechnological Equipment, 26 (4). pp. 3106-3112. ISSN 1310-2818

H’ng, Wei Cha and El-Qarni, Muhammad and Shabuddin, Yaakop and Md. Illias, Rosli and Nik Mahmood, Nik Azmi (2008) Microbial Fuel Cell (MFC): preliminary study on electricity generation using baker’s yeast. In: Special topics in bioprocess engineering. Penerbit Universiti Teknologi Malaysia, pp. 127-138. ISBN 978-983-52-0603-0

Hubadillah, Siti Khadijah and Othman, Mohd. Hafiz Dzarfan and Harun, Zawati and Ismail, Ahmad Fauzi and A. Rahman, Mukhlis and Jaafar, Juhana and Jamil, Siti Munira and Mohtor, Nur Hamizah (2017) Superhydrophilic, low cost kaolin-based hollow fibre membranes for efficient oily-wastewater separation. Materials Letters, 191 . pp. 119-122. ISSN 0167-577X

Hadibarata, Tony and Mohd. Yusoff, Abdull Rahim and Yusop, Zulkifli and Wirasnita, Riry (2014) Removal of bisphenol a from aqueous solution by activated carbon derived from oil palm empty fruit bunch. Water Air and Soil Pollution, 225 (10). ISSN 0049-6979

Halimoon, H. and Hussain, A. R. and Kouzani, A. and Alam, M. N. H. Z. (2016) Aerobic fermentation of saccharomeyes cerevisae in a miniature bioreactor made of low cost poly(methylmethacrylate) (PMMA) and Poly(Dimethylsiloxane) (PDMS) Polymers. Sains Malaysiana, 45 (6). pp. 969-976.

I

Izhab, Izirwan (2017) Carbon dioxide reforming of methane over cobalt supported on activated carbon catalysts for syngas production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Irfan, Muhammad (2017) Sulfonated polyethersulfone and functionalized multiwall carbon nanotube / polyvinylprolidone nanocomposite based hemodialysis membrane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

I. Holzman, Michael and A. Scheff, Peter and Mohd. Yusof, Mohd. Rashid (1990) Application and evaluation of four regression techniques for a chemical mass balance receptor model. - . pp. 1-17. (Unpublished)

I. M., Noor and M., Hasan and K. B., Ramachandran (2006) Effect of carbon and nitrogen sources on the production of lipase by Candida cylindracea 2031 in batch fermentation. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ibrahim, Akos Noel (2013) Preparation and characterization of oil palm fiber reinforced poly(e-caprolactone)/poly(lactic acid) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Busari Bolaji (2014) A graphical cost-screen techniques for carbon management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, G. P. S. and Isloor, A. M. and Moslehyani, A. and Ismail, A. F. (2017) Bio-inspired, fouling resistant, tannic acid functionalized halloysite nanotube reinforced polysulfone loose nanofiltration hollow fiber membranes for efficient dye and salt separation. Journal of Water Process Engineering, 20 . pp. 138-148. ISSN 2214-7144

Ibrahim, G. P. S. and Isloor, A. M. and Inamuddin, Inamuddin and Asiri, A. M. and Ismail, N. and Ismail, A. F. and Ashraf, G. M. (2017) Novel, one-step synthesis of zwitterionic polymer nanoparticles via distillation-precipitation polymerization and its application for dye removal membrane. Scientific Reports, 7 (1). ISSN 2045-2322

Ibrahim, M. H. and Kassim, N. M. and Mohammad, A. B. and Adam, I. (2009) A CWDM/DWDM arrayed waveguide grating based on photodefinable polymer. Optoelectronics And Advanced Materials-Rapid Communications, 3 (1). pp. 13-16. ISSN 1842-6573

Ibrahim, Mohamad Al Hafiz (2013) Preparation and characterization of compatibilized polypropylene / poly (acrylonitrile-butadiene-styrene) blends and nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Muthmirah (2011) Mechanical, thermal and morphological properties of modified Sabah montmorillonite filled polypropylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, N. and Jensen, P. A. and Dam-Johansen, K. and Hamid, M. K. A. and Kasmani, R. M. and Ali, R. R. (2013) Experimental investigation of combustion behavior of flash pyrolysis oil. In: Developments in Sustainable Chemical and Bioprocess Technology. Springer US, pp. 181-187. ISBN 978-146146208-8

Ibrahim, N. A. and Ahmad Zaini, M. A. (2016) Parametric investigation of fixed-tray, semi-continuous distillation column for ethanol separation from water. Jurnal Teknologi, 78 (11). pp. 85-92. ISSN 0127-9696

Ibrahim, N. A. and Zaini, M. A. A. (2017) Solvent selection in microwave assisted extraction of castor oil. Chemical Engineering Transactions, 56 . pp. 865-870. ISSN 2283-9216

Ibrahim, Norliza and Ahmad, Abdul Latif and Bhatia, Subhash (2004) Removal of suspended solids and residual oil using membrane separation technology. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Ibrahim, Nur Atirah (2017) Microwave-assisted solvent extraction of castor oil from caastor seeds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Rabialtu Sulihah (2016) Assessment of hybrid attached growth membrane bioreactor system for domestic wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Ibrahim, Zuwairie and Arshad, Nurul Wahidah and Shapiai @ Abd. Razak, Mohd. Ibrahim and Mokhtar, Norrima (2015) Different learning functions for weighted kernel regression in solving small sample problem with noise. In: The International Conference on Artificial Life and Robotics 2015 (ICAROB 2015) 20th Arob Anniversary, 10-12 Jan, 2015, Japan.

Ibrahim, Zuwairie and Khalid, Noor Khafifah and Ibrahim, Ismail and Lim, Kian Sheng and Buyamin, Salinda and Md. Yusof, Zulkifli and Muhammad, Mohd. Saufee (2011) Function minimization in DNA sequence design based on binary particle swarm optimization. Jurnal Teknologi (Sains & Kej.) Keluaran Khas, 54 . pp. 331-342. ISSN 0127–9696 (Print); 2180-3722 (Online)

Ibrahim, Kamarul 'Asri and Ahmad, Arshad and Ali, Mohamad Wijayanuddin and Mak, Weng Yee (2006) Development of fault detection, diagnosis and control system identification using multivariate statistical process control (MSPC). Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Idham, Z. and Nasir, H. M. and Yunus, M. A. C. and Yian, L. N. and Peng, W. L. and Hassan, H. and Setapar, S. H. M. (2017) Optimisation of supercritical CO2 extraction of red colour from roselle (Hibiscus Sabdariffa Linn.) calyces. Chemical Engineering Transactions, 56 . pp. 871-876. ISSN 2283-9216

Idham, Zuhaili and Che Yunus, Mohd. Azizi and Abdul Aziz, Mustafa Kamal and Mohd. Setapar, Siti Hamidah and Mohamad, Hasanah (2014) Formulation of green varnish from ecological friendly material for the development of offset printing ink. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 65-68. ISSN 0127-9696

Idris, A. and Ismail, A. F. and Iswandi, S. and Shilton, S. J. (2001) Effect of methanol concentration on the performance of asymmetric cellulose acetate reverse osmosis membranes using dry/ wet phase inversion technique. Jurnal Teknologi F (34F). pp. 39-50. ISSN 0127-9696

Idris, Ani and Ahmed, I. and Jye, H. W. (2007) Performance of cellulose acetate-polyethersulphone blend membrane prepared using microwave heating for palm oil mill effluent treatment. Water Science & Technology, 56 (8). pp. 169-177. ISSN 0273-122384

Idris, Ani and Hew, Ka Yee and Chan, Mieow Kee (2009) Preparation of cellulose acetate dialysis membrane using d-glucose monohydrate as additive. Jurnal Teknologi (Kejuruteraan) (51F). pp. 67-76. ISSN 0127-9696

Idris, Ani and Ismail, A. F. and Noordin, M. Y. and Shilton, S. J. (2002) Optimization of cellulose acetate hollow fiber reverse osmosis membrane production using Taguchi method. Journal of Membrane Science, 205 (1-2). pp. 223-237. ISSN 0376-7388

Idris, Ani and Ismail, A. F. and Noorhayati, M. and Shilton, S. J. (2003) Measurement of Rheologically Induced Molecular Orientation Using Attenuated Total Reflection Infrared Dichroism in Reverse Osmosis Hollow Fiber Cellulose Acetate Membranes and Influence on Separation Performance. Journal of Membrane Science, 213 (1-2). pp. 45-54. ISSN 0376-7388

Idris, Ani and Ismail, A.F. and Gordeyev, S.A. and Shilton, S.J. (2002) Effect Of Rheological Behaviour Of Cellulose Acetate Spinning Solutions On Performance Of Reverse Osmosis Hollow Fiber Membranes. Jurnal Teknologi F (37F). pp. 1-14. ISSN 0127-9696

Idris, Ani and Ismail, Ahmad Fauzi and Shilton, Simon J. and Rashid, Roslina and Musa, M. (2002) The deduction of fine structural details of reverse osmosis hollow fiber membranes using surface force-pore flow model. Separation and Purification Technology, 29 (3). pp. 217-227. ISSN 1383-5866

Idris, Ani and Lee, Kuan Yet and Noordin, M. Y. and Chan, Mieow Kee (2008) Response surface methodology approach to study the influence of PEG and water in cellulose acetate dialysis membranes. Jurnal Teknologi F (49F). pp. 39-49. ISSN 0127-9696

Idris, Ani and Noordin, M. Y. and Ismail, A. F. and Shilton, S. J. (2002) Study of shear rate influence on the performance of cellulose acetate reverse osmosis hollow fiber membranes. Journal of Membrane Sciene, 202 . pp. 205-215.

Idris, A. and Majidnia, Z. and Nor Kamarudin, K. S. B. (2016) Photocatalyst treatment for lead(II) using titanium oxide nanoparticles embedded in PVA-alginate beads. Desalination and Water Treatment, 57 (11). pp. 5035-5044. ISSN 1944-3994

Idris, Ani (2012) Effect of photoperiod on the growth of unicellular microalgae nannochloropsis sp. In: The 2012 International Conference On Agriculturel, Food And Biological Engineering (ICAFBE 2012), 2012.

Idris, Ani and Ahmed, Iqbal (2006) An economical production of polyethersulfone asymmetric membranes using mixture of two solvents and lithium chloride as additive. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Idris, Ani and Ahmed, Iqbal (2007) A production of polyethersulfone asymmetric membranes using mixture of two solvents and lithium chloride as additive. Jurnal Teknologi (47F). pp. 25-34. ISSN 0127-9696 (Print); 2180-3722 ( Electronics)

Idris, Ani and Ahmed, Iqbal and Che Pa, Nasrul Fikry (2009) Novel method of synthesizing polyethersulfone membrane containing two solvents and lithium chloride additive and its performance. Journal of Applied Polymer Science, 115 (3). pp. 1428-1437. ISSN 1097-4628

Idris, Ani and Hamzah, Fazlena (2008) Enzymatic hydrolysis of treated palm oil empty fruit bunches fibre (efb) using combination alkali-microwave techniques. Journal of Biotechnology, 136 (Supp 1). S406. ISSN 0168-1656

Idris, Ani and Ismail, Ahmad Fauzi and Iswandi, S. and Shilton, Simon J. (2001) Effect of methanol concentration on the performance of asymmetric cellulose acetate reverse osmosis membranes using dry/wet phase inversion technique. Jurnal Teknologi, 34F . pp. 39-50. ISSN 2180-3722

Idris, Ani and Majidnia, Zohreh (2015) Evaluation of the CD removal efficacy from aqueous solutions using titania PVA-alginate beads. Desalination and Water Treatment, 56 (1). pp. 266-273. ISSN 1944-3994

Idris, Ani and Misran, E. and Mohd. Yusof, Noordin (2012) Photocatalytic reduction of Cr(VI) by PVA-alginate encapsulated γFe 2O 3 magnetic beads using different types of illumination lamp and light. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2151-2156. ISSN 1226-086X

Idris, Ani and Mohd. Ismail, Nur Suriani and Hassan, Nursia and Misran, Effaliza and Ngomsik, Audrey Flore (2012) Synthesis of magnetic alginate beads based on maghemite nanoparticles for Pb(II) removal in aqueous solution. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 1582-1589. ISSN 1226-086X

Idris, Ani and Mohd. Yusof, Noordin and Misran, Effaliza and Rahman, Muhammad Aizat Azizul (2014) Removal of cadmium using ferro magnetic gels. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 5-9. ISSN 0127-9696

Idris, Ani and Nasrudin, Md. Rahim and Ibrahim, Marini and Mohd., Zaini Ya'Cob and Hashim, Emi Fazlina and Akhtar, Junaid and Lai, Long Wee (2016) Study on composition, structural and property changes of oil palm frond biomass under different pretreatments. Cellulose Chemistry and Technology, 50 (9-10). pp. 951-959. ISSN 0576-9787

Idris, Ani and Suhaimi, Mohd Suardi and Mohd Zain, Nor Azimah (2007) Determination of effective diffusion coeficient of immobilized baker's yeast invertase in various concentration of PVA-alginate matrix. In: Proceedings of the International Conference on Biotechnology Engineering (ICBioE'07), 8-10 May 2007, Kuala Lumpur.

Idris, Ani and Teo, Chee Loong (2014) Rapid alkali catalyzed transesterification of microalgae lipids to biodiesel using simultaneous cooling and microwave heating and its optimization. Bioresource Technology, 174 . pp. 311-315. ISSN 0960-8524

Idris, Ani and Wahidin, Suzana and Muhamad, Sitti Raehanah (2014) Rapid biodiesel production using wet microalgae via microwave irradiation. Energy Conversion and Management, 84 . pp. 227-233. ISSN 0196-8904

Idris, Ani (2001) Fabrication and optimisation of asymmetric hollow fiber membranes for reverse osmosis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Idris, Ahmad Kamal and Mohd. Arshad, Azmi and Chong, Chee Hou (1993) Pembinaan dan penentukuran minipermeameter. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 2-5.

Idris, Ani and Ismail, A. F. and Gordeyev, S. A. and Shiltom, S. J. (2003) Rheology assessment of cellulose acetate spinning solution and its influence on reverse osmosis hollow fiber membrane performance. Polymer Testing, 22 . pp. 319-325.

Idris, Ani and Mat Zain, Norashikin (2006) Effect of heat treatment on the performance and structural details of polyethersulfone ultrafiltration membranes. Jurnal Teknologi F, 44 (F). pp. 27-40. ISSN 0127-9696

Idroas, Mariani and Zakaria, Zainal (2012) Modelling on ultrasonic tomography instrumentation system for monitoring flaw in pipeline coating. In: 4th International Conference on Science and Technology 2012, 2012.

Idumah, C. I. and Hassan, A. (2016) Recently emerging trends in thermal conductivity of polymer nanocomposites. Reviews in Chemical Engineering, 32 (4). pp. 413-457. ISSN 0167-8299

Idumah, C. I. and Hassan, A. and Bourbigot, S. (2017) Influence of exfoliated graphene nanoplatelets on flame retardancy of kenaf flour polypropylene hybrid nanocomposites. Journal of Analytical and Applied Pyrolysis, 123 . pp. 65-72. ISSN 0165-2370

Idumah, C. I. and Hassan, A. (2017) Hibiscus cannabinus fiber/PP based nano-biocomposites reinforced with graphene nanoplatelets. Journal of Natural Fibers, 14 (5). pp. 691-706. ISSN 1544-0478

Idumah, Christopher Igwe and Hassan, Azman (2016) Characterization and preparation of conductive exfoliated graphene nanoplatelets kenaf fibre hybrid polypropylene composites. Synthetic Metals, 212 . pp. 91-104. ISSN 0379-6779

Idumah, Christopher Igwe and Hassan, Azman (2016) Effect of exfoliated graphite nanoplatelets on thermal and heat deflection properties of kenaf polypropylene hybrid nanocomposites. Journal of Polymer Engineering, 36 (9). pp. 877-889. ISSN 0334-6447

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in eco-compliant, synergistic, and hybrid assembling of multifunctional polymeric bionanocomposites. Reviews in Chemical Engineering, 32 (3). pp. 305-361. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in flame retardancy of biofibers, biopolymers, biocomposites, and bionanocomposites. Reviews in Chemical Engineering, 32 (1). pp. 115-148. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in graphene carbon based polymer nanocomposites and applications. Reviews in Chemical Engineering, 32 (2). pp. 223-264. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman and Affam, Augustine Chioma Hioma (2015) A review of recent developments in flammability of polymer nanocomposites. Reviews in Chemical Engineering, 31 (2). pp. 149-177. ISSN 0167-8299

Idwar, Irdlinna (2014) Physicochemical, Biochemical and organoleptic analysis of pineapple cultivars MD2 and MORRIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Ikhsan, S. N. W. and Abdullah, N. and Yusof, N. and Aziz, F. and Misdan, N. and Salleh, W. N. W. and Ismail, A. F. (2017) Preparation and characterisation of polyethersulfone/ hydrous ferric oxide mixed matrix membranes with improved hydrophilicity for treatment of oily waste water. Chemical Engineering Transactions, 56 . pp. 175-180. ISSN 2283-9216

Ikhsan, Azman and Kasmungin, Sugiatmo and Idris, Ahmad Kamal (1997) The CO2 flooding: prospect and challenges on Malaysian oil field. Proceedings of Regional Symposium on Chemical Engineering, 2 . pp. 388-393.

Ikram-ul-Haq, Ikram-ul-Haq and Mukhtar, Hamid (2006) Kinetics of invertase synthesis by Saccharomyces cerevisiae in synthetic medium. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ilbeygi, H. and Ismail, Ahmad Fauzi and Nasef, Mohamed Mahmoud and Jaafar, J. and Jalalvandi, E. and Panahi, P. (2013) Electerochemical study of speek/cloisite 15a (r)/tap membrane at moderate temperature for DMFC application. In: Advances In Applied Materials And Electronics Engineering Ii.

Ilbeygi, Hamid and Ghasemi, Mostafa and Emadzadeh, Daryoush and Ismail, Ahmad Fauzi and Zaidi, S. M. Javid and Aljlil, Saad A. and Jaafar, Juhana and Martin, Darren and Keshani, Samaneh (2015) Power generation and wastewater treatment using a novel SPEEK nanocomposite membrane in a dual chamber microbial fuel cell. International Journal of Hydrogen Energy, 40 (1). pp. 477-487. ISSN 0360-3199

Illias, R. M. and Ramli, A. N. M. and Low, K. O. and Muhammad Mahadi, N. and Abdul Murad, A. M. and Rabu, A. (2013) Heterologous expression of proteins from cold-adapted yeasts in suitable hosts: methods and applications. In: Cold-adapted Yeasts: Biodiversity, Adaptation Strategies and Biotechnological Significance. Springer-Verlag Berlin Heidelberg, pp. 481-496. ISBN 978-364239681-6

Ing, Tiong Chiong and Abdul Kadir, Mohammed Rafiq and Yahya, Wira Jazair and Samion, Syahrullail (2012) Experimental study the effect of speeds in wear using fourball tribotester. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 226-232. ISSN 0094-243X

Insiong, Henry (2006) Simulation and optimization of propane autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Inuwa, I. M. and Arjmandi, R. and Ibrahim, A. N. and Haafiz, M. K. M. and Wong, S. L. and Majeed, K. and Hassan, A. (2016) Enhanced mechanical and thermal properties of hybrid graphene nanoplatelets/multiwall carbon nanotubes reinforced polyethylene terephthalate nanocomposites. Fibers and Polymers, 17 (10). pp. 1657-1666. ISSN 1229-9197

Inuwa, I. M. and Hassan, A. and Samsudin, S. A. and Haafiz, M. K. M. and Jawaid, M. (2017) Interface modification of compatibilized polyethylene terephthalate/polypropylene blends: effect of compatibilization on thermomechanical properties and thermal stability. Journal of Vinyl and Additive Technology, 23 (1). pp. 45-54. ISSN 1083-5601

Inuwa, Ibrahim and Azman, Hassan and Samsudin, Sani Amril (2014) Thermal properties, structure and morphology of graphene reinforced polyethylene terephthalate/polypropylene nanocomposites. Malaysian Journal of Analytical Sciences, 18 (2). pp. 466-477. ISSN 1394-2506

Iqbal, Tariq and Eckhoff, Steven and Syed, A. F. and Nizami, Abdul Sattar and Sadef, Yumna (2015) Airflow resistance of chopped michantus on drying platform. Transactions of the Asabe, 58 (2). pp. 487-492. ISSN 2146-4138

Irawan, Sonny (2006) Development of beneficiation technique for bentonite for applications in petroleum industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Irawan, Sonny and Samsuri, Ariffin (2005) Beneficiation of an andrassy and mansuli bentonite as a drilling mud material. Lewigas Journal (National Oil & Gas Indonesian Journal, December 2005) . (Submitted)

Irawan, Sonny and Samsuri, Ariffin (2002) Utilization of Treated Malaysian Local Bentonite For Drilling Mud Material Cost Saving. International Journal of Engineering (IJE), Iran, December 2002 .

Irfan, M. and Idris, A. and Khairuddin, N. F. M. (2016) Removal of heavy metal ions from its low concentrated lake water via LiBr/PES hollow fiber membrane module system. Desalination and Water Treatment, 57 (43). pp. 20388-20400. ISSN 1944-3994

Irfan, M. and Idris, A. and Nasiri, R. and Almaki, J. H. (2016) Fabrication and evaluation of polymeric membranes for blood dialysis treatments using functionalized MWCNT based nanocomposite and sulphonated-PES. RSC Advances, 6 (103). pp. 101513-101525. ISSN 2046-2069

Irfan, Masooma and Basri, Hatijah and Irfan, Muhammad and Lau, Woei-Jye (2015) An acid functionalized MWCNT/PVP nanocomposite as a new additive for fabrication of an ultrafiltration membrane with improved antifouling resistance. Rsc Advances, 5 (116). pp. 95421-95432. ISSN 2046-2069

Irfan, Muhammad and Idris, Ani and Mohd. Yusof, Noordin and Mohd. Khairuddin, Nur Farahah and Akhmal, Hasrul (2014) Surface modification and performance enhancement of nano-hybrid f-MWCNT/PVP90/PES hemodialysis membranes. Journal of Membrane Science, 467 . pp. 73-84. ISSN 1873-3123

Isa, Khairuddin Md. and Abdullah, Tuan Amran Tuan and Ali, Umi Fazara Md. (2016) Hydrogen donor solvents in liquefaction of biomass: a review. Renewable and Sustainable Energy Reviews . ISSN 1364-0321 (In Press)

Isha, Ruzinah (2005) Artificial neural networks application in combined carbon dioxide reforming and partial oxidation of methane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ishak, Amir Fuhaira (2015) Production of selenium enriched saccharomyces boulardii in pilot scale bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ishak, Mohd. Azali (2013) Steady-state CFD simulation of gas-solid flow for inlet boundary conditions in a fluidized bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Nadiah and Mohd. Kassim, Angzzas Sari and Mohd. Aripin, Ashuvila and Abang Zaidel, Dayang Norulfairuz and Zainulabidin, Muhd. Hafeez (2015) Identification and expression of ligninase enzymes from tropical asia wood insect for agro-pulp biodelignification: a theoretical framework. In: Applied Mechanics And Materials, 15 July, 2015, Kuala Lumpur, Malaysia.

Ishak, Noor Fauziyah and Hashim, N. Awanis and Othman, Mohd. Hafiz Dzarfan and Monash, Purushothaman and Mohamed Zuki, Fathiah (2017) Recent progress in the hydrophilic modification of alumina membranes for protein separation and purification. Ceramics International, 43 (1). pp. 915-925. ISSN 0272-8842

Ishak, S. A. and Hashim, H. and Ting, T. S. (2016) Eco innovation strategies for promoting cleaner cement manufacturing. Journal of Cleaner Production, 136 . pp. 133-149. ISSN 0959-6526

Ishak, Siti Aktar and Hashim, Haslenda and Ting, Tan Sie (2016) Eco innovation strategies for promoting cleaner cement manufacturing. Journal of Cleaner Production, 136 . pp. 133-149. ISSN 0959-6526

Islam, M. S. and Talib, Z. A. and Hasan, M. and Ramli, I. and Haafiz, M. K. M. and Jawaid, M. and Islam, A. and Inuwa, I. M. (2017) Evaluation of mechanical, morphological, and biodegradable properties of hybrid natural fiber polymer nanocomposites. Polymer Composites, 38 (3). pp. 583-587. ISSN 0272-8397

Islam, Md. Saiful and Hamdan, Sinin and Ahmad, Mansor and Hasan, Mahbub and Hassan, Azman and Haafiz, Mohamad and Jawaid, Mohammed (2014) Effect of PVA-co-MMA copolymer on the physical, mechanical, and thermal properties of tropical wood materials. Advances in Materials Science and Engineering . ISSN 1687-8434

Islam, Md. Saiful and Hamdan, Sinin and Hassan, Azman and Talib, Zainal Abidin and Sobuz, H. R. (2014) The chemical modification of tropical wood polymer composites. Journal of Composite Materials, 48 (7). pp. 783-789. ISSN 1530-793X

Islam, S. and Bidin, N. and Riaz, S. and Naseem, S. (2016) Sol-gel based phenolphthalein encapsulated heterogeneous silica-titania optochemical pH nanosensor. Journal of Industrial and Engineering Chemistry, 34 . pp. 258-268. ISSN 1226-086X

Islam, S. and Bidin, N. and Riaz, S. and Naseem, S. (2016) Structural and optical properties of surfactant assisted SiO2-TiO2 hybrid matrix for pH sensing: sol-gel approach. Jurnal Teknologi, 78 (3). pp. 211-215. ISSN 0127-9696

Islam, S. and Bidin, N. and Riaz, S. and Naseem, S. and Marsin, F. M. (2016) Correlation between structural and optical properties of surfactant assisted sol-gel based mesoporous SiO2-TiO2 hybrid nanoparticles for pH sensing/optochemical sensor. Sensors and Actuators, B: Chemical, 225 . pp. 66-73. ISSN 0925-4005

Ismail, A. F. and Hafiz, W. A. (2005) Development of Gas-Separation Membrane-Assisted Lead-Acid Battery. Journal of Power Sources, 141 (1). pp. 177-187. ISSN 0378-7753

Ismail, A. F. and Hassan, A. R. (2004) The deduction of fine structural details of asymmetric nanofiltration membranes using theoretical models. Journal of Membrane Science, 231 . pp. 23-36.

Ismail, A. F. and Lorna, W. (2002) Penetrant-induced plasticization phenomenon in glassy polymers for gas separation membrane. Separation Purification and Technology, 27 (3). pp. 173-194. ISSN 1383-5866

Ismail, A. F. and Lorna, W. (2003) Suppression of plasticization in polysulfone membranes for gas separations by heat-treatment technique. Separation and Purification Technology, 30 . pp. 37-46. ISSN 1383-5866

Ismail, A. F. and Ng, B. C. and Abdul Rahman, W. A. W. (2003) Effects of shear rate and forced convection residence time on asymmetric polysulfone membranes structure and gas separation performance. Separation and Purification Technology, 33 (3). pp. 255-272. ISSN 1383-5866

Ismail, A. F. and Shilton, S. J. (2000) The Practical Use Of Resistance Modeling To Interpret The Gas Separation Properties Of Hollow Fiber Membranes. Jurnal Teknologi F (32F). pp. 93-101. ISSN 0127-9696

Ismail, A. F. and Zubir, N and Nasef, M. M. and Dahlan, K. M. and Hassan, A. R. (2005) Physico-chemical study of sulfonated polystyrene pore-filled electrolyte membranes by electrons induced grafting. Journal of Membrane Science, 254 (1). pp. 189-196. ISSN 0376-7388

Ismail, Ahmad Fauzi and Hafiz, Wan Ahmad (2002) Effect of Polysulfone Concentration on the Performance of Membrane-Assisted Lead Acid Battery. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 815-821. ISSN 0125-3395

Ismail, Ahmad Fauzi and Kusworo, Tutuk Djoko and Mustafa, A. (2008) Enhanced gas permeation performance of polyethersulfone mixed matrix hollow fiber membranes using novel Dynasylan Ameo silane agent. Journal of Membrane Science, 319 (1-2). pp. 306-312. ISSN 0376-7388

Ismail, Ahmad Fauzi and Lai, Ping Yean (2003) Review on the development of defect-free and ultrathin- skinned asymmetric membranes for gas separation through manipulation of phase inversion and rheological factors. Journal of Applied Polymer Science, 88 (2). pp. 442-451. ISSN 0021-8995

Ismail, Ahmad Fauzi and Mohd. Ibrahim, Suhaina and Nasri, Nor Shawal (2002) Effects of dope extrusion rate on the morphology and gas separation performance of asymmetric polysulfone hollow fiber membranes for 024 separation. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 833-842. ISSN 0125-3395

Ismail, Ahmad Fauzi and Rahim, R. A. and Rahman, W. A. W. A. (2008) Characterization of polyethersulfone/Matrimid® 5218 miscible blend mixed matrix membranes for O2/N2 gas separation. Separation and Purification Technology, 63 . pp. 200-206. ISSN 1383-5866

Ismail, Ahmad Fauzi and Ridzuan, Norida and Abdul Rahman, Sunarti (2002) Latest development on the membrane formation for gas separation. Songklanakarin Journal of Science and Technology, 24 (Suppl). pp. 1025-1043. ISSN 0125-3395

Ismail, Issham and Kweh, Wei Loon (2003) Matrix acidizing with gelled acid. Jurnal Teknologi F (38F). pp. 13-24. ISSN 0127-9696

Ismail, Noor Maizura and Lim, Yen Fei and Lim, Lai Cheng and Chieng, Yu Yuen and Kamarudin, Khairol Sozana Nor and Mat, Hanapi (2005) Adsorption of Protein on H-Beta Zeolite. Proceeding of International Conference of Chemical and Bioprocess Engineering .

Ismail, A. F. and David, L. I. B. (2003) Future direction of R&D in carbon membranes for gas separation. Membrane Technology, April 2003 . pp. 1-5.

Ismail, A. F. and Haron, S. (2000) Development of a simulation model for a hollow fiber membrane N2-H2 separation system. Jurnal Teknologi F (32F). pp. 45-56. ISSN 0127-9696

Ismail, A. F. and Hassan, A. R. (2007) Effect of additive contents on the performances and structural Properties of Asymmetric Polyethersulfone (PES) nanofiltration membranes. Separation and Purification Technology, 55 (1). pp. 98-109. ISSN 1383-5866

Ismail, A. F. and Kusworo, T. D. and Mustafa, A. and Hasbullah, H. (2006) Advanced materials for membrane-based gas separation. Journal of Applied Membrane Science & Technology, 3 . pp. 29-64. ISSN 1823–366X

Ismail, A. F. and Lai, P. Y. (2003) Effects of phase inversion and rheological factors on formation of defect-free and ultrathin-skinned asymmetric polysulfone membranes for gas separation. Separation and Purification Technology, 33 (2). pp. 127-143. ISSN 1383-5866

Ismail, A. F. and Yaacob, N. (2006) Performance of treated and untreated asymmetric polysulfone hollow fiber membrane in series and cascade module configurations for CO2/CH4 gas separation system. Journal of Membrane Science, 275 (1-2). pp. 151-165. ISSN 0376-7388

Ismail, A. R. and Alias, A. H. and Sulaiman, W. R. W. and Jaafar, M. Z. and Ismail, I. (2017) Drilling fluid waste management in drilling for oil and gas wells. Chemical Engineering Transactions, 56 . pp. 1351-1356. ISSN 2283-9216

Ismail, A. R. and Wan Sulaiman, W. R. and Jaafar, M. Z. and Ismail, I. and Sabu Hera, E. (2016) Nanoparticles performance as fluid loss additives in water based drilling fluids. In: 4th International Conference on Nano and Materials Engineering, ICNME 2016, 7-8 April 2016, Bali Island, Indonesia.

Ismail, A.F. and Hassan, A.R. (2006) Formation and Characterization of Asymmetric Nanofiltration Membrane: Effect of Shear Rate and Polymer Concentration. Journal of Membrane Science, 270 (1-2). pp. 57-72.

Ismail, Abdul Razak and Jaafar, Mohd. Zaidi and Wan Sulaiman, Wan Rosli and Ridzuan, Ariff (2015) Shale swelling mitigation in water-based drilling fluids with amine additives. In: 8th International Conference on Geological and Geo-Resources Engineering, 29-30 Sept, 2015, Penang, Malaysia.

Ismail, Ahmad Fauzi and Bolong, Nurmin and Salim, Mohd. Razman and Matsuura, T. (2009) A review of the effects of emerging contaminants in wastewater and options for their removal. Desalination, 238 (1-3). pp. 229-246. ISSN 00119164

Ismail, Ahmad Fauzi and Hashemifard, S. A. and Matsuura, T. (2011) Facilitated transport effect of ag+ ion exchanged halloysite notubes on the performance of polyetherimide mixed matrix membrane for gas separation. Journal of Membrane Science, 379 . pp. 378-385. ISSN 0376-7388

Ismail, Ahmad Fauzi and Lai, P. Y. (2004) Development of Defect-Free Asymmetric Polysulfone Membranes for gas separation using response surface methodology. Separation and Purification Technology, 40 (2). pp. 191-207. ISSN 1383-5866

Ismail, Ahmad Fauzi and Lau, Woei Jye (2008) The effects of structural and electrical properties of hollow fiber nanofiltration membranes on salt and dye removal under different solution properties. Jurnal Teknologi, 49F . pp. 103-113. ISSN 0127-9696

Ismail, Ahmad Fauzi and Mansourizadeh, Amir (2010) A comparative study on the structure and performance of porous polyvinylidene fluoride and polysulfone hollow fiber membranes for CO2 absorption. Journal of Membrane Science, 365 (1-2). 319 - 328. ISSN 0376-7388

Ismail, Ahmad Fauzi and Mustafa, A. and Abdullah, M. S. and Abd. Rahaman, Muhammad Syukri and Hasbullah, H. and Ng, B. C. (2008) Effects of polymer composition and coagulation bath temperature on the fabrication and characteristics of carbon fiber precursor in solvent-free coagulation process. In: Development in Polymer-based Carbon Fiber Research in Malaysia. Penerbit UTM , Johor, pp. 111-136. ISBN 978-983-52-0605-4

Ismail, Ahmad Fauzi and Othman, Nurhidayati (2008) Composite SPEEK WITH Siwa, Sio2 And Alo2 : novel materials for polymer electrolyte membrane. In: Sulfonated Poly(ether ether ketone) : Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, pp. 71-86. ISBN n/a

Ismail, Ahmad Fauzi and Padaki, Mahesh and Hilal, Nidal and Matsuura, Takeshi and Lau, Woei Jye (2015) Thin film composite membrane - Recent development and future potential. Desalination, 356 . pp. 140-148. ISSN 0011-9164

Ismail, Ahmad Fauzi and Rahman, W. R. and Aziz, F. (2009) Development of polysulfone (PSF)-carbon molecular sieve (CMS) mixed matrix membrane (MMM) for O(2)/N(2) gas separation. In: Nanoscience and Nanotechnology. AIP Conference Proceedings, 1136 . Amer Inst Physics, New York, pp. 201-206. ISBN 978-0-7354-0673-5

Ismail, Ahmad Fauzi and Ridzuan, Norida and Wan Abdul Rahman, Wan Aizan and Matsuura, T. and Hashemifard, S. A. (2011) Preparation and characterization of hyperthin-skinned and high performances asymmetric polyethersulfone membrane for gas separation. Desalination, 273 (1). pp. 93-104. ISSN 0011-9164

Ismail, Ahmad Fauzi and Tan, Chin Yin and Chan, Fook Kiong (2001) Effects of feed pressure and retentate flow rate on the performance of locally developed polysulfone membrane oxygen enrichment system. Jurnal Teknologi F, 34F . pp. 11-20. ISSN 0127-9696

Ismail, Ahmad Fauzi and Tee, Jia Chee and Aziz, Madzlan (2007) Influence of catalyst preparation on synthesis of multi-walled carbon nanotubes. In: Nanotech Malaysia 2007 & 4th Asia Nano Forum Summit 2007, 2007, PWTC, Kuala Lumpur.

Ismail, Ahmad Ramdan (2015) Solubility of swietenia mahagoni seed in supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Ahmad Shamsul Izwan (2014) Two phase flow of waxy crude oil-water in horizontal pipes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ismail, Al Emran and Wan Muhammad, Wan Nur Azrina and Abd. Rahim, Amirusham (2006) Effect aging treatment on tensile properties of natural fiber reinforced polyester composites. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Ismail, Atikah (2013) Kenaf and rice husk filled polypropylene composites containing ammonium polyphosphate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, H. F. and Hashim, Z. and Soon, W. T. and Rahman, N. S. A. and Zainudin, A. N. and Majid, F. A. A. (2017) Comparative study of herbal plants on the phenolic and flavonoid content, antioxidant activities and toxicity on cells and zebrafish embryo. Journal of Traditional and Complementary Medicine, 7 (4). pp. 452-465. ISSN 2225-4110

Ismail, H. F. and Majid, F. A. A. and Hashim, Z. (2017) Eugenia polyantha enhances adipogenesis via CEBP-? and adiponectin overexpression in 3T3-L1. Chemical Engineering Transactions, 56 . pp. 1117-1122. ISSN 2283-9216

Ismail, I. and Lim, P. S. (2008) The performance of locally produced xanthan gum in drilling mud. Journal of Chemical and Natural Resources Engineering, 2 . pp. 49-57. ISSN 1823-5255

Ismail, Issham (2008) Program specifications for bachelor in engineering (petroleum). In: Faculty of Chemical & Natural Resources Engineering: Guide Book (Undergraduate 2008/09). Faculty of Chemical & Natural Resources Engineering, pp. 108-123.

Ismail, Issham and Ann Poon, Huang (2009) The application of methyl glucoside as shale inhibitor in sodium chloride mud. Jurnal Teknologi, 50 (F). pp. 53-65. ISSN 2180-3722

Ismail, Issham and Asalem, Mohd. Anas and Mazeli, Abdul Hakim and Wan Sulaiman, Wan Rosli and Jaafar, Mohd. Zaidi and Ismail, Abdul Razak (2015) The brink of oil and gas energy: a great loss? In: Energy and Technology Camp 2015, 7-9 Nov, 2015, Skudai, Johor.

Ismail, Issham and Ismail, Ahmad Shamsul Izwan and Mamat, Nur Suriani and Muhtar, Muhamad Khairul Amin (2014) Improving shale inhibitive performance using methyl glucoside (MEG) in potassium chloride mud. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 27-35. ISSN 2180-3722

Ismail, Issham and Mamat, Nur Suriani and Mamat, Baihaqi and Ismail, Ahmad Shamsulizwan and Kamis, Azmi and Ikhsan, Azman (2013) Improving gas bubbles' half life in foam drilling fluid. Jurnal Teknologi (Sciences and Engineering), 62 (1). pp. 103-110. ISSN 0127-9696

Ismail, M. and Muhammad, B. and M. Yatim, J. and Noruzman, A. H. and Soon, Y. W. (2011) Behavior of concrete with polymer additive at fresh and hardened states. Procedia Engineering, 14 . pp. 2230-2237. ISSN 1877-7058

Ismail, Mardhiah S. J. and Md. Noor, Norhazilan and Yahaya, N. and Mohammad, Abu Bakar and Mohd. Ali, Muhammad Khairool Fahmy and Abdullah, Arman M. (2015) Statistical investigation on anaerobic sulphate-reducing bacteria growth by turbidity method. International Journal of Biological Chemistry, 9 (4). pp. 178-187. ISSN 1819-155X

Ismail, Mohammad (2012) Extraction of alkaline solution from cocoa pod husk for synthesis of geopolymer. In: The First Australia and South-East Asia Structural Engineering and Construction Conference, 28 Nov - 2 Dec 2012, Perth, Australia.

Ismail, Mohd. Halim Shah and Abdul Aziz, Mustafa Kamal and Morad, Noor Azian (2009) Research work on steam accumulator in palm oil mill. European Journal of Scientific Research, 37 (4). pp. 628-640. ISSN 1450-216X

Ismail, Mohd. Halim Shah and Abdul Aziz, Mustafa Kamal and Morad, Noor Azian (2009) Review of literature on steam accumulator sizing in palm oil mill. European Journal of Scientific Research, 37 (4). pp. 542-551. ISSN 1450-216X

Ismail, N. and Ho, G. S. and Saidina Amin, Nor Aishah and Ani, Farid Nasir (2015) Microwave plasma gasification of oil palm biochar. Jurnal Teknologi, 74 (10). pp. 7-13. ISSN 2180-3722

Ismail, N. H. and Salleh, W. N. W. and Sazali, N. and Ismail, A. F. (2017) Effect of intermediate layer on gas separation performance of disk supported carbon membrane. Separation Science and Technology (Philadelphia), 52 (13). pp. 2137-2149. ISSN 0149-6395

Ismail, Nabawia M. and Ismail, Ahmad F. and Mustafa, Azeman and Matsuura, Takeshi and Soga, T. and Nagata, Kenji and Asaka, T. (2015) Qualitative and quantitative analysis of intercalated and exfoliated silicate layers in asymmetric polyethersulfone/cloisite15A® mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Journal, 268 . pp. 371-383. ISSN 1385-8947

Ismail, Noor Faizah and Hamdan, Salehhuddin and Mahadi, Nor Muhammad and Abdul Murad, Abdul Munir and Rabu, Amir and Abu Bakar, Farah Diba and Klappa, Peter and Md. Illias, Rosli (2011) A mutant l-asparagise ii signal peptide improves the secretion of recombinant cyclodextrin glucanotransferase and the viability of escherichia coli. Biotechnology Letters, 33 . pp. 999-1005. ISSN 0141-5492

Ismail, Noor Maizura (2005) Adsorption characteristics of protein on zeolite adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ismail, Noor Maizura (2015) Polyethersulfone/cloisite 15A mixed matrx membranes for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Nor Hafiza (2017) Disk supported carbon membrane derived from based polymer polyimide for carbon dioxide related separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Nor Hafiza and Wan Salleh, Wan Norharyati and Sazali, Norazlianie and Mohamed, Mohamad Azuwa and Rosman, Nurafiqah and Yusof, Norhaniza (2017) Effect of P84 (BTDA-TDI/MDI) composition towards the performance of the disk supported carbon membrane. Jurnal Teknologi, 79 (1-2). pp. 41-45. ISSN 0127-9696

Ismail, Norasyikin and Ani, Farid Nasir (2015) Syngas production from microwave gasification of oil palm biochars. In: Applied Mechanics And Materials, 2015.

Ismail , A.F. and Lai, P.Y. (2002) Effects of Shear Rate on Morphology and Gas Separatlon Performance as Asymetric Polysulfone Membranes. ASEAN Journal of Chemical Engineering (AJChE), 2 (1). pp. 67-74. ISSN 1655-4418

Ismail , Ahmad Fauzi and Hassan, Abdul Rahman and Ng, Be Cheer (2002) Effect of shear rate on the performance of nanofiltration membrane for water desalination. Songklanakarin Journal Science and Technology, 24 (Suppl). pp. 879-889. ISSN 0125-3395

Ismail, A. F. and David, L. I .B. (2001) A Review on the Latest Development of Carbon Membranes for Gas Separation. Journal of Membrane Science, 193 (1). pp. 1-18. ISSN 0376-7388

Ismail, A. F. and Dunkin, I. R. and Gallivan, S. L. and Shilton, S. J. (1999) Production of Super Selective Polysulfone Hollow Fiber Membranes for Gas Separation. Polymer, 40 (23). pp. 6499-6506. ISSN 0032-3861

Ismail, A. F. and Kumari, S. N. (2004) Potential effect of potting resin on the performance of hollow fibre membrane modules in a CO2/CH4 gas separation system. Journal of Membrane Science, 236 . pp. 183-191.

Ismail, A. F. and Mustaffar, M. I. and Illias, R. M. and Abdullah, M. S. (2006) Effect of dope extrusion rate on morphology and performance of hollow fibers membrane for ultrafiltration. Separation and Purification Technology, 49 (1). pp. 10-19. ISSN 1383-5866

Ismail, A. F. and Shillton, S. J. and Dunkin, I. R. and Gallivan, S. L. (1997) Direct Measurement of Rheologically Induced Molecular Orientation in Gas Separation Hollow Fibre Membranes and Effects on Selectivity. Journal of Membrane Science, 126 (1). pp. 133-137. ISSN 0376-7388

Ismail, A. F. and Shilton, S. J. (1998) Polysulfone gas separation hollow fiber membranes with enhanced selectivity. Journal of Membrane Science, 139 (2). pp. 285-286. ISSN 0376-7388

Ismail, Abdul Razak and Khor, Siak Foo (2001) Feasibility study of palm oil esters as based fluid in drilling operation. Proceedings of regional Conference on Young Scientists 2001 . pp. 23-28.

Ismail, Issham (1993) The importance of having an accurate multiphase flow correlations program. Proceedings of International Colloquium and Exposition on Computer Applications in Coastal & Offshore Engineering . ix-11.

Ismail, Issham and A. Aziz, Ramlan (1989) Penggunaan teknik mikropenurasan aliran silang dalam pengeluaran air suntikan. Prosiding Simposium Jurutera Kimia Malaysia Ke-5 . pp. 250-264.

Ismail, Issham and Abdul Kadir, Abdul Aziz (1998) The importance of implementing proper mixing procedures in the preparation of HEC and corn starch mixtures for controlling fluid loss. Proceedings of International Conference on Mixing and Crystallization .

Ismail, Issham and Idris, Ahmad Kamal (1997) Keupayaan kanji jagung sebagai bahan tambah kawalan kehilangan bendalir dalam industri huluan petroleum. Proceedings of Science & Technology Developments in the East Coast States with Special Reference to Chemistry .

Ismail, Issham and Ikhsan, Azman (1997) Kajian aliran dua fasa dengan menggunakan model berskala makmal. In: Seminar Kebangsaan Teknologi Makmal ke-3, 20-21 Oktober 1997, USM, Pulau Pinang.

Ismail, Issham and Ismail, Abdul Razak and Yang, Juhari (1999) Managing drilling mud weight using ilmenite. Proceedings of World Engineering Congress .

Ismail, Issham and Junin, Radzuan and Md. Abidin, Amat Rashidi (2000) Pemendakan kerak di dalam talian paip. In: Malaysian Science & Technology Congress 2000, November 7-9, 2000, Awana Golf & Country Resort, Genting Highland.

Ismail, Issham and Mohd. Arshad, Azmi (1995) Pengukuran keabrasifan hematit tempatan pada skala makmal. In: Seminar kebangsaan Teknologi Makmal, Oktober 1995, UTM Skudai.

Ismail, Nor Faekah (2007) Modeling of Insulin Receptor Modeling of Insulin Receptor Binding & Recycling Binding & Recycling Subsystem. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Ismaila, A. and Saimon, N. N. and Jusoh, M. and Zakaria, Z. Y. (2017) Adsorption of free fatty acid in biodiesel from palm fatty acid distillate using koh-Activated starch. Chemical Engineering Transactions, 56 . pp. 619-624. ISSN 2283-9216

Ismaila, Aminu and Ahmad, Termizi Ramli and Md Kasmani, Rafiziana and Abubakar, S. Aliyu (2016) Current knowledge and research opportunities in nuclear fire safety: a technical overview on aircraft impact upon nuclear containment. Indian Journal Of Science And Technology, 9 (46). p. 107076. ISSN 09746846

Istadi, Istadi and Saidina Amin, Nor Aishah (2005) A hybrid numerical approach for multi-responses optimization of process parameters and catalyst compositions in CO2 OCM process over CaO-MnO/CeO2 catalyst. Chemical Engineering Journal, 106 . pp. 213-227. ISSN 1385-8947

Istadi, I. and Anggoro, Didi D. and Saidina Amin, Nor Aishah and Hoo, Dorothy Wei Ling (2011) Catalyst deactivation simulation through carbon deposition in carbon dioxide reforming over ni/cao-al 2o 3 catalyst. Bulletin of Chemical Reaction Engineering and Catalysis, 6 (2). pp. 129-136. ISSN 1978-2993

Istadi, Istadi (2006) Catalytic conversion of methane and carbon dioxide in conventional fixed bed and dielectric barrier discharge plasma reactors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ithnin, Masliana (2011) Treatability of leachate using EZ enzyme. Masters thesis, School of Graduate Studies.

J

J., Norafiqah and M., Rashid and R., Firdausi (2003) Tahap kontaminasi Bioearosol : satu kajian kes. Jurnal Teknologi F (39F). pp. 1-10. ISSN 0127-9696

Jaafar, Jaafariah and Ismail, Ahmad Fauzi and Mustafa, Azeman (2007) Physicochemical study of poly(ether ether ketone) electrolyte membranes sulfonated with mixtures of fuming sulfuric acid and sulfuric acid for direct methanol fuel cell application. Materials Science and Engineering A, 460-461 . pp. 475-484. ISSN 0921-5093

Jaafar, Juhana (2011) Development of sulfonated poly (ether ether ketone) triaminopyrimidine nanocomposite membrane for direct methanol fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Jaafar, Juhana and Aziz, Madzlan and Ismail, Ahmad Fauzi and A. Rahman, Mukhlis and Othman, Mohd. Hafiz Dzarfan and Yusof, Norhaniza and Wan Salleh, Wan Norharyati and Nik Mustofar, Nik Nurdhiya (2015) Transport behavior of proton and methanol in SPEEK/Cloisite 15A/TAP composite membranes at varies temperature. In: The 4lh ICIBA 2015, International Conference on Information Technology and Business Applications, 20-21 Feb, 2015, Indonesia.

Jaafar, Mohd. Zaidi (2012) Measurement of streaming potential coupling coefficient on carbonate rocks for downhole monitoring in smart wells. In: The 6th South East Asia Technical Universities Consortium (SEATUC) Symphosium, 2012.

Jaafar, N. R. and Littler, D. and Beddoe, T. and Rossjohn, J. and Md. Illias, R. and Mahadi, N. M. and Mackeen, M. M. and Murad, A. M. A. and Abu Bakar, F. D. (2016) Crystal structure of fuculose aldolase from the Antarctic psychrophilic yeast Glaciozyma antarctica PI12. Acta Crystallographica Section: F Structural Biology Communications, 72 (11). pp. 831-839. ISSN 2053-230X

Jaafar, Nardiah Rizwana and Littler, Dene and Beddoe, Travis and Rossjohn, Jamie and Md. Illias, Rosli and Mahadi, Nor Muhammad and Mackeen, Mukram Mohamed and Abdul Murad, Abdul Munir and Abu Bakar, Farah Diba (2016) Crystal structure of fuculose aldolase from the Antarctic psychrophilic yeast Glaciozyma antarctica PI12. Acta Crystallographica Section:F Structural Biology Communications, 72 (11). pp. 831-839. ISSN 2053-230X

Jaafar, Nur Farhana and Abd. Jalil, Aishah and Triwahyono, Sugeng (2017) Visible-light photoactivity of plasmonic silver supported on mesoporous TiO2 nanoparticles (Ag-MTN) for enhanced degradation of 2-chlorophenol: limitation of Ag-Ti interaction. Applied Surface Science, 392 (1). pp. 1068-1077. ISSN 0169-4332

Jaafar, Nur Farhana and Abdul Jalil, Aishah and Triwahyono, Sugeng and Muhd. Muhid, Muhd. Nazlan and Sapawe, Norzahir and Satar, Mohammad Azrul Hisham and Asaari, Hanak (2012) Photodecolorization of methyl orange over α-Fe2O3-supported HY catalysts: the effects of catalyst preparation and dealumination. Chemical Engineering Journal, 191 . pp. 112-122. ISSN 1385-8947

Jafari, Hossein and Sadeghi, Rasoul and Idris, Mohd. Hasbullah and Ourdjini, Ali (2012) Effect of flux composition on mould-magnesium reaction during in-situ melting. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 480-485. ISSN 0094-243X

Jaganathan, S. K. and Balaji, A. and Mohandas, H. and Sivakumar, G. and Kasi, P. and Selvakumar, M. and Kadiman, S. B. and Srinivasan, A. and Mohd. Faudzi, A. A. B. and Supriyanto, E. and Mandal, M. (2017) Hemocompatibility of sulfuric acid-treated metallocene polyethylene and its application in reducing the quantity of medical plastic waste. Polymer - Plastics Technology and Engineering, 56 (3). pp. 240-253. ISSN 0360-2559

Jaganathan, S. K. and Mani, M. P. and Ayyar, M. and Supriyanto, E. (2017) Engineered electrospun polyurethane and castor oil nanocomposite scaffolds for cardiovascular applications. Journal of Materials Science, 52 (18). pp. 10673-10685. ISSN 0022-2461

Jaganathan, S. K. and Mani, M. P. and Ismail, A. F. and Ayyar, M. (2017) Manufacturing and characterization of novel electrospun composite comprising polyurethane and mustard oil scaffold with enhanced blood compatibility. Polymers, 9 (5). ISSN 2073-4360

Jalalvandi, Esmat (2012) Polylactic acid/thermoplastic starch/montmorillonite nanocomposite : morphological, tensile properties, water absortion and degradation behavior. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Jalil, Abdul Rahim (2006) Development of adsorption selective carbon membrane using cellulose acetate for separation of O2/N2 and C1-C4 hydrocarbons/N2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jalil, Abdul Rahim and Mohd. Nawawi, Mohd. Ghazali and Mohd. Sakri, Norhaslina and Jusoh, Nor Zamiha (2006) Adsorption selective carbon membrane the for separation of O2/N2 and C1-C4 Hydrocarbon/N2. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Jalil, Suhana (2004) Development of nanofiltration polyethersulfone hollow fiber membrane for cyclodextrin glycosyltransferase (CGTase) separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jalil, Suhana and Ismail, Ahmad Fauzi and Hashim, Shahrir (2004) Preparation and characterization of polyethersulfone hollow fiber nanofiltration membranes made from PES/NMP/PEG 400/WATER. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Jalil, Suhana and Mohd. Yusof, Mohd. Rashid and M. H. S., Raja (2015) Natural radioactivity from non-nuclear power generation power industries: regulatory control of naturally occurring radioactive material (NORM) for environmental sustainability. In: Third International Postgraduate Conference, 23-25 Feb, 2015, Johor Bahru, Johor.

Jalilavi, Madjid and Zoveidavianpoor, Mansoor and Attarhamed, Farshid and Junin, Radzuan and Mohsin, Rahmat (2014) Artificial weathering as a function of CO2 injection in Pahang Sandstone Malaysia: investigation of dissolution rate in surficial condition. Scientific Reports, 4 . ISSN 2045-2322

Jaliliannosrati, Hamidreza (2012) Microwave assisted two step in situ method for biodiesel production from jatropha Curcas L. Seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jalin, Lenny (2007) Physical properties and sensory attribute of coconut moisturizer with Vitamin E. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Jamal, Parveen and Alam, Md. Zahangir and Saleh, Nurul Umi (2006) Screening for potential strain to produce bioprotein from cheaper carbon source. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Jamalludin, M. R. and Harun, Z. and Hubadillah, S. K. and Basri, H. and Ismail, A. F. and Othman, M. H. D. and Shohur, M. F. and Yunos, M. Z. (2016) Antifouling polysulfone membranes blended with green SiO2 from rice husk ash (RHA) for humic acid separation. Chemical Engineering Research and Design, 114 . pp. 268-279.

Jamaluddin, J. and Lee, M. C. (2013) Curing properties of uv-cured pressure sensitive adhesives. In: Advanced Materials Research.

Jamaluddin, Jafni (2007) Evaluation of Preservative Properties in Psidium Guajava Leafs Using Hydro-Alcoholic Extraction. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Jamaludin, Azmir (2012) Removal of free fatty acid from crude palm oil using organic solvent nanofiltration (OSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Abolhasani, Hooman and Murtadha, Hadi and Ab. Rahman, Mohd. Nizam (2011) An influence of a binder system to the rheological behaviour of the SS316L metal injection molding (MIM) feedstock. Advanced Materials Research, 264-26 . pp. 554-558. ISSN 1022-6680

Jamaludin, Nurhikmah (2016) Anti-proliferative activity of crude and fractionated extract of labisia pumila on human prostate cancer cell lines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamaludin, Nurhikmah and Syed Hassan, Sharifah Norzie and Omer, Kosar Ali and Hasham, Rosnani and Sarmidi, Mohamad Roji (2014) Cytotoxicity assessment of Labisia pumila on prostate cancer cell lines (DU145). In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Jambari, S. and Yahya, M. Y. and Abdullah, M. R. and Jawaid, M. (2017) Woven Kenaf/Kevlar Hybrid Yarn as potential fiber reinforced for anti-ballistic composite material. Fibers and Polymers, 18 (3). pp. 563-568. ISSN 1229-9197

Jamian, Nor Ruwaida and Mohd. Yusof, Mohd. Rashid and Mohd. Muzi, Syahirah (2015) Particulate emission size distribution from palm oil mill boiler. In: International Conference on Sustainability Initiatives, 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Jamil, Md. Kawser (1999) Thermal processing of rubber-based solid waste to liquid fuel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamil, S. M. and Othman, M. H. D. and Rahman, M. A. and Jaafar, J. and Ismail, A. F. (2017) Anode supported micro-tubular SOFC fabricated with mixed particle size electrolyte via phase-inversion technique. International Journal of Hydrogen Energy, 42 (14). pp. 9188-9201. ISSN 0360-3199

Jamil, S. M. and Othman, M. H. D. and Rahman, M. A. and Jaafar, J. and Mohamed, M. A. and Yusop, M. Z. M. and Ismail, A. F. and Tanemura, M. (2017) Dual-layer hollow fiber MT-SOFC using lithium doped CGO electrolyte fabricated via phase-inversion technique. Solid State Ionics, 304 . pp. 113-125. ISSN 0167-2738

Jamil, Siti Munira (2011) Removal of metals from recovered base oil using chitosan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamil, Siti Munira and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi and Mohamed, Mohamad Azuwa (2015) Role of lithium oxide as a sintering aid for a CGO electrolyte fabricated via a phase inversion technique. RSC Advances, 5 (72). pp. 58154-58162. ISSN 2046-2069

Jamil, Siti Munira Unira and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. and Jaafar, Juhana and Ismail, Ahmad F. and Li, Kang (2015) Recent fabrication techniques for micro-tubular solid oxide fuel cell support: a review. Journal of the European Ceramic Society, 35 (1). pp. 1-22. ISSN 0955-2219

Jamshidi Gohari, R. and Korminouri, Fatemeh and Lau, Woei Jye and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Chowdhury, Md Najmul Kabir and Halakoo, Elnaz and Jamshidi Gohari, Mohammad Saleh (2015) A novel super-hydrophilic PSf/HAO nanocomposite ultrafiltration membrane for efficient separation of oil/water emulsion. Separation and Purification Technology, 150 . pp. 13-20. ISSN 1383-5866

Jaradat, Nidal A. and Zaid, Abdel Nasir and Eid, Ahmad M. and Elmarzugi, Nagib Ali (2015) Development and evaluation of nanoemulsion hydrogel. In: Palestinian Forum for Medical Research Symposium, 4 Apr, 2015, Palestin.

Jati Charlie, Agnese (2007) Expression of chitinase gene from T Trichoderma virens IN Escherichia coli. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Javadi, Ali and Abouzari-Lotf, Ebrahim and Mehdipour-Ataei, Shahram and Zakeri, Masoumeh and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Ripin, Adnan (2015) High refractive index materials: a structural property comparison of sulfide- and sulfoxide-containing polyamides. Journal of Polymer Science, Part A: Polymer Chemistry, 53 (24). pp. 2867-2877. ISSN 0887-624X

Javadi, Ali and Najjar, Zahra and Bahadori, Saedeh and Vatanpour, Vahid and Malek, Ali and Abouzari-Lotf, Ebrahim and Shockravi, Abbas (2015) High refractive index and low-birefringence polyamides containing thiazole and naphthalene units. RSC Advances, 5 (111). pp. 91670-91682. ISSN 2046-2069

Jawaid, M and Hassan, Azman and Abdul Khalil, H.P.S (2013) Effect of coupling agent on mechanical and thermal behaviour of oil palm/jute hybrid composites. In: Green Technologies For Sustainable & Innovation In Materials.

Jawaid, Mohammad and Abdul Khalil, H. P. S and Hassan, Azman and Elgorban, Abdallah (2012) Bi-layer hybrid biocomposites : chemical resistant and physical properties. Bioresources, 7 (2). pp. 2344-2355. ISSN 1930-2126

Jema'on, Noor Azah (2011) Genome sequence survey of alkaliphilic bacillus lehensis GI and candidate genes involved in pH homeostasis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jemale, Alia Sofie (2010) Mixed-mode silica monolith as an efficient separation medium for capillary electrochromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jentry, E. M. and Hassim, M. H. and El Halwagi, M. and Ponce Ortega, J. M. (2017) Inherent occupational health assessment of biobutanol separation processes during the conceptual design stage. Chemical Engineering Transactions, 56 . pp. 91-96. ISSN 2283-9216

Jian, Wei Lim and Hassan, Azman and Rahmat, Abdul Razak and Wahit, Mat Uzir (2006) Morphology, thermal and mechanical behavior of polypropylene nanocomposites toughened with poly(ethylene-co-octene). Polymer International, 55 (2). pp. 204-215. ISSN 0959-8103

Jiang, Ping Tang and Hon, Loong Lam and Abdul Aziz, Mustafa Kamal and Morad, Noor Azian (2015) Game theory approach in Malaysia palm biomass industry: analysis. Chemical Engineering Transactions, 45 . pp. 463-468. ISSN 2283-9216

Jilani, A. and Abdel-Wahab, M. S. and Othman, M. H. D. and V. K., S. and Alsharie, A. (2017) Sputtered CuO mono-phase thin films: structural, compositional and spectroscopic linear/nonlinear optical characteristics. Optik, 144 . pp. 207-218. ISSN 0030-4026

Jilani, A. and Othman, M. H. D. and Ansari, M. O. and Kumar, R. and Alshahrie, A. and Ismail, A. F. and Khan, I. U. and Sajith, V. K. and Barakat, M. A. (2017) Facile spectroscopic approach to obtain the optoelectronic properties of few-layered graphene oxide thin films and their role in photocatalysis. New Journal of Chemistry, 41 (23). pp. 14217-14227. ISSN 1144-0546

Jingjing, Xu and Huaizhou, Jiang and Jinquan, Li and Kian, Kai Cheng and Jiyang, Dong and Zhong, Chen (2015) 1H NMR-based metabolomics investigation of copper-laden rat: a model of Wilson's disease. PLoS ONE, 10 (4). ISSN 1932-6203

Johari, Anwar and Mohd. Yunus, Rosli and Noordin, Mohd. Suffian and Md. Ghazali, Mohd. Nazlee Faisal and Tuan Abdullah, Tuan Amran (2001) MmNi5 and MmNi4.85Fe0.15 as Hydrogen Storage Medium. Jurnal Teknologi F (35F). pp. 1-10. ISSN 0127-9696

Johari, Anwar and Taib, Mohamad Rozainee (2007) Effect of sand sizes on the fluidization behavior in circular and rectangular columns. Journal of Chemical and Natural Resources Engineering, 2 . pp. 14-21. ISSN 1833-5255

Johari, Anwar (2009) Design and operating parameters of a fulidized bed for the combustion of municipal solid waste using standpipes air distributors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Johari, Anwar (2000) Hydrogen absorption characteristics of MmNi5 and MmNi4.85Fe0.15 as hydrogen storage medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Anwar and Nyakuma, Bemgba Bevan and Mohd. Nor, Shadiah Husna and Mat, Ramli and Hashim, Haslenda and Ahmad, Arshad and Zakaria, Zaki Yamani and Tuan Abdullah, Tuan Amran (2015) The challenges and prospects of palm oil based biodiesel in Malaysia. Energy, 81 . pp. 255-261. ISSN 3605-442

Johari, K. and Saman, N. and Tien, S. S. and Chin, C. S. and Kong, H. and Mat, H. (2016) Removal of elemental mercury by coconut pith char adsorbents. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Johari, Khairiraihanna (2010) Synthesis and charactrization of sulfur-functionalized spherical silica gels as mercury adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Khairiraihanna (2015) Synthesis, characterization and performance of adsorbents for mercury vapor removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Khairiraihanna and Saman, Norasikin and Mat, Hanapi (2014) Adsorption enhancement of elemental mercury onto sulphur-functionalized silica gel adsorbents. Environmental Technology, 35 (5). pp. 629-636. ISSN 0959-3330

Johari, Khairiraihanna and Saman, Norasikin and Mat, Hanapi (2014) Synthesis and characterization of novel sulfur-functionalized silica gels as mercury adsorbents. Journal of Materials Engineering and Performance, 23 (3). pp. 809-818. ISSN 1059-9495

Johari, Khairiraihanna and Saman, Norasikin and Shiow, Tien Song and Mat, Hanapi and Stuckey, David C. (2013) Utilization of coconut milk processing waste as a low-cost mercury sorbent. In: Industrial And Engineering Chemistry Research.

Johari, Khairiraihanna and Saman, Norasikin and Song, Shiow Tien and Cheu, Siew Chin and Kong, Helen and Mat, Hanapi (2016) Development of coconut pith chars towards high elemental mercury adsorption performance - effect of pyrolysis temperatures. Chemosphere, 156 . pp. 56-68. ISSN 0045-6535

Johari, Khairiraihanna and Saman, Norasikin and Song, Shiow Tien and Mat, Hanapi (2015) Adsorption equilibrium and kinetics of elemental mercury onto coconut pith. Journal of Environmental Science and Technology, 8 (2). pp. 74-82. ISSN 1992-8645

Johari, Khairiraihanna and Saman, Norasikin and Song, Shiow Tien and Mat, Hanapi and Jerry, Heng (2014) Study of Hg(II) removal from aqueous solution using lignocellulosic coconut fiber biosorbents: equilibrium and kinetic evaluation. Chemical Engineering Communications, 201 (9). pp. 1198-1220. ISSN 1563-5201

John, Agnes Aruna Runa and Subramanian, Aruna Priyadarshini Riyadarshini and Vellayappan, Muthu Vignesh Ignesh and Balaji, Arunpandian and Jaganathan, Saravana Kumar and Paramalinggam, T. and Supriyanto, Eko and Yusof, Mustafa A. R. (2015) Review : physico-chemical modification as a versatile strategy for the biocompatibility enhancement of biomaterials. RSC Advances, 5 (49). pp. 39232-39244. ISSN 2046-2069

Jonet, Mohd. Anuar (2012) Extracellular protein secretion optimization in Escherichia coli by signal peptide mutation and additive supplementation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jong, Rudiyanto Philman and Osman,, Kahar and Mohd. Adib, Mohd. Azrul Hisham and Hisham, M. (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 604-611. ISSN 0094-243X

Juiani, Siti Fairuz (2013) Nickel removal from electroless nickel plating wastewater using chitosan-membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jumari, N. F. and Mohd. Yusof, K. (2017) Comparison of melt flow index of propylene polymerisation in loop reactors using first principles and artificial neural network models. Chemical Engineering Transactions, 56 . pp. 163-168. ISSN 2283-9216

Jumari, Nur Fazirah (2013) Melt flow index estimation using neural network models for propylene polymerization process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Junin, Radzuan and Abang Hasbollah, Dayang Zulaika (2016) CO2 storage capacity assessment of deep saline aquifers in Malaysia. In: 18th International Conference on Oil Reserves and Production, 17-18 Oct, 2016, London, United Kingdom.

Junin, Radzuan and Amirian, Tahmineh and Idris, Ahmad Kamal (2011) Adsorption of nanonionic surfactants on clay minerals. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 113-122. ISSN 0127-9696

Junin, Radzuan and Bayat, Ali Esfandyari (2015) Transportation of metal oxide nanoparticles through various porous media for enhanced oil recovery. In: SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition (APOGCE 2015), 20-22 Oct, 2015, Indonesia.

Junin, Radzuan and Nasri, Noor Shawal and Hammuda Aluhwal, Omar Kalifa (2016) Effect of CO2 content, reservoir temperature and pressure of SACW on oil recovery. In: International Conference on Science, Engineering, Management and Social Science (INSEMSS 2016), 06-OCT-16, MALAYSIAUTM JB.

Junin, Radzuan and Mustapha, Saari (1988) Local calcium carbonate powder: its properties and application as fillers. PARTEC '88 . pp. 1-7.

Junoh, Hazlina (2016) Fabrication of nanocomposite membrane via combined electrospinning and casting technique for direct methanol fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Junoh, Hazlina and Jaafar, Juhana and Ismail, Ahmad Fauzi and Anam, Muhammad Noorul and Othman, Mohd Hafiz Dzarfan and A. Rahman, Mukhlis and Wan Salleh, Wan Norharyati and Yusof, Norhaniza (2015) Fabricanon of as-spun SPEEK as a function of degree of sulfonation. In: The 4th ICIBA 2015, International Conference on Information Technology and Business Applications Palembang Indonesia, 20-21 Feb, 2015, Indonesia.

Junoh, M. M. and Ani, F. N. (2016) A study on various design shape of commercial granular activated carbon for textile wastewater filteration. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10836-10839. ISSN 1819-6608

Jusin, Jashiela Wani and Aziz, Madzlan and Sean, Goh Pei and Jaafar, Juhana (2016) Preparation and characterization of graphene-based magnetic hybrid nanocomposite. Malaysian Journal of Analytical Sciences, 20 (1). pp. 149-156. ISSN 1394-2506

Jusoh, Emiliana R. and Ismail, M. Halim Shah and Abdullah, Luqman C. and Yusof, Robiah and Wan Abdul Rahman, Wan Aizan (2012) Crude palm oil as a bioadditive in polypropylene blown films. Bioresources, 7 (1). pp. 859-867. ISSN 1930-2126

Jusoh, L. S. and Hashim, H. and Lim, J. S. and Mansor, N. N. A. (2017) Framework for greenhouse gas accounting towards green port. Chemical Engineering Transactions, 56 . pp. 685-690. ISSN 2283-9216

Jusoh, M. and Mohd. Yunus, R. and Abu Hassan, M. A. (2008) Effect of initial concentration of solution and coolant temperature on a new progressive freeze concentration system. Journal of Chemical and Natural Resources Engineering, 2 . pp. 122-129. ISSN 1823-5255

Jusoh, Mazura (2010) Development of a novel system for progressive freeze concentration process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Mazura and Mohamed Nor, Noor Naimah (2014) Progressive freeze concentration of coconut water: effect of circulation flowrate and circulation time. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 91-96. ISSN 2180-3722

Jusoh, Mazura and Mohamed Nor, Noor Naimah and Amran, Nurul Aini and Syamsuri, Shafirah (2014) Enhancement of sugar content through progressive freeze concentration: effect of initial concentration. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 19-22. ISSN 0127-9696

Jusoh, Mazura and Yahya, Norshafika and Zakaria, Zaki Yamani (2014) Effect of flowrate and circulation time on fractionation of refined bleached and deodorised palm oil using progressive freeze concentration method. Jurnal Teknologi (Sciences and Engineering), 67 (3). pp. 117-122. ISSN 2180-3722

Jusoh, Mohd. Ruswadi (2008) Commissioning of a pilot scale fluidised bed combustor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Noorshartika and Zakaria, Zuriati and Othman, Nor'Azizi and Sugiura, Norio and Goto, Masafumi and Mad Nordin, Mariam Firdhaus and Mohamad, Shaza Eva and Iwamoto, Koji and Yoneda, Kenichi and Shameli, Kamyar and Hara, Hirofumi (2015) Extraction of hemicellulose from oil palm biomass using subcritical water extraction to produce value-added product or fine chemicals. In: International Conference on Sustainable Initiatives (ICSI 2015), 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Jusoh, Norela (2017) Palm oil based emulsion liquid membrance for succinic acid extration performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jusoh, Norela (2017) Palm oil based emulsion liquid membrane formulation for succinic acid extraction performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Jusoh, Norela and Othman, Norasikin (2016) Stability of palm oil-based emulsion liquid membrane for succinic acid extraction from aqueous solution. Journal of Applied Membrane Science and Technology, 19 . pp. 1-17. ISSN 1823-366X

Jusoh, Norela and Othman, Norasikin and Idris, Ani and Nasruddin, Alina (2014) Characterization of liquid pineapple waste as carbon source for production of succinic acid. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 11-13. ISSN 0127-9696

Jusoh, Norela and Othman, Norasikin and Nasruddin, Nur Alina (2016) Emulsion liquid membrane technology in organic acid purification. Malaysian Journal of Analytical Sciences, 20 (2). pp. 436-443. ISSN 1394-2506

Jusoh, Norela and Othman, Norasikin and Nasruddin, Nur Alina (2016) Emulsion liquid membrane technology in organic acid purification [Teknologi emulsi membran cecair dalam penulenan asid organik]. Malaysian Journal of Analytical Sciences, 20 (2). pp. 436-443. ISSN 1394-2506

Jusoh, Norela W. C. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Karim, Ainul Hakimah and Salleh, Norashikin F. M. and Rozali Annuar, Nur Hazirah and Jaafar, Nur Farhana and Firmansyah, M. L. and Mukti, Rino R. and Ali, Mohamad Wijayanuddin (2015) Structural rearrangement of mesostructured silica nanoparticles incorporated with ZnO catalyst and its photoactivity: effect of alkaline aqueous electrolyte concentration. Applied Surface Science, 330 . pp. 10-19. ISSN 0169-4332

Jusoh, Norhana (2009) A ferrocene based glucose biosensor with an extended linear measuring range. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Norhani (2007) Bioremediation of phenol in a chemostat using residential wastewater microorganisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, R. and Abdul Jalil, Aishah and Triwahyono, S. and Idris, A. and Haron, S. and Sapawe, N. and Jaafar, N. F. and Jusoh, N. W. C. (2014) Synthesis of reverse micelle alpha-FeOOH nanoparticles in ionic liquid as an only electrolyte: inhibition of electron-hole pair recombination for efficient photoactivity. Applied Catalysis A: General, 469 . pp. 33-44. ISSN 0926-860X

Jusoh, Rohayu (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jusoh, Rohayu and Abdul Jalil, Aishah and Triwahyono, Sugeng and Jaafar, Nur Farhana (2014) Kinetic analysis of 2-chlorophenol photodegradation over alpha-feooh nanoparticles prepared in cationic surfactant electrolyte. In: 27th Regional Symposium of Malaysia Analytical Sciences, 8-10 Dec, 2014, Johor Bahru, Malaysia.

Jusoh, Samsiah and Din, Laily and Zakaria, Zuriati (2015) Xanthones and an anthraquinone from stem bark and roots of Cratoxylum arborescens. Malaysian Journal of Analytical Sciences, 19 (4). pp. 745-751. ISSN 1394-2506

Jusoh, Y. M. M. and Orsat, V. and Gariepy, Y. and Raghavan, V. (2017) Optimisation of radio frequency assisted extraction of apple peel extract: Total phenolic contents and antioxidant activity. Chemical Engineering Transactions, 56 . pp. 1153-1158. ISSN 2283-9216

Jusoh @ Alias, Nor Zamiha (2009) Pervaporation separation of methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh @ Alias, Nor Zamiha (2009) Pervaporation separation of methyl tert-butyl ether /methanol mixtures using polyion complex chitosan membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Justin, T. J. L. and Rashid, M. Y. M. (2006) The sensitivity of harp model on atmospheric boundary mixing heights. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Johari, K. and Saman, N. and Song, S. T. and Chin, C. S. and Kong, H. and Mat, H. (2016) Adsorption enhancement of elemental mercury by various surface modified coconut husk as eco-friendly low-cost adsorbents. International Biodeterioration and Biodegradation, 109 . pp. 45-52.

K

Khani, Mojtaba (2017) Photocatalytic reduction of carbon dioxide and methane using a plasmonic property of silver/titania nanoparticles. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Khangholi, Shahpour (2017) Advanced glycation end products formation inhibition through standardized crude extract of punica granatum L. stem bark. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Kimi, Melody and Yuliati, Leny and Shamsuddin, Mustaffa (2015) Preparation of high activity Ga and Cu doped ZnS by hydrothermal method for hydrogen production under visible light irradiation. Journal of Nanomaterials, 2015 . ISSN 1687-4110

K. S., Surej and Samsuri, Ariffin (1998) Rock mechanics in petroleum industries and the importance to wellbore stability. In: Malaysian Sciences & Technology Congress '98, 30-31 October 1998, Johor Bharu.

K. S. N, Kamarudin and Y. Y., Chieng and H., Hamdan and H., Mat (2010) Methane adsorption characteristics of copper oxide modified NaY zeolite adsorbents. ASM Science Journal, 4 (1). pp. 29-40. ISSN 1823-6782

K. Wulan, Praswasti P. D. and Gozan, Misri and W., Anondho and Dianursanti, Dianursanti and S., Mahmud (2006) Biodegradation of Linear Alkyl Benzene Sulfonate by bacterial consortium. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

K.Nair, Abhinav and M. Isloor, Arun and Kumar, Rajesha and Ismail, Ahmad Fauzi (2013) Antifouling and performance enhancement of polysulfone ultrafiltration membranes using CAVO3 nanoparticles. Desalination, 322 . pp. 69-75. ISSN 0011-9164

Kadhim, Fadhil Sarhan (2016) Cementation factor and carbonate formation properties correlation from well logs data for nasiriya field. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kadhim, Fadhil Sarhan and Samsuri, Ariffin and Al-Dunainawi, Yousif (2015) ANN-based prediction of cementation factor in carbonate reservoir. In: SAI Intelligent Systems Conference 2015, 10-11 Nov, 2015, London.

Kadhim, Fadhil Sarhan and Samsuri, Ariffin and Idris, Ahmad Kamal and Alwan, Haider and Hashim, Muhammad (2015) Investigation of petrophysical properties for Yamamma carbonate formation. Modern Applied Science, 9 (6). pp. 36-47. ISSN 1913-1844

Kadhum, Abdul Amir H. and Mohamad, Abu Bakar and Wan Daud, Wan Ramli and Harahap, Navriani and Sitanggang, Ramli (2004) Water permeability study of Nafion® 117 membrane after undergoing hot press. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Kadhum, Abdul Amir H. and Mohamad, Abu Bakar and Wan Daud, Wan Ramli and Sitanggang, Ramli (2004) Water permeability study of Membrane Electrode Assembly (MEA) fabrication using X-Y robotic sprayer machine. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Kaha, Marshila and Yahya, Nurul Ashyikin and Suhaimi, Noraiza and Hara, Hirofumi and Sugiura, Norio and Othman, Nor'Azizi and Zakaria, Zuriati and Goto, Masafumi and Iwamoto, Koji (2015) Effect of nitrate concentration on cell growth and astaxanthin accumulation in four different species of isolated microalgae in Malaysia. In: International Conference On Sustainable Initiatives (ICSI 2015), 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Kaiser, E. and Jaganathan, S. K. and Supriyanto, E. and Ayyar, M. (2017) Fabrication and characterization of chitosan nanoparticles and collagen-loaded polyurethane nanocomposite membrane coated with heparin for atrial septal defect (ASD) closure. 3 Biotech, 7 (3). ISSN 2190-572X

Kamal Rudin, Amirah and Mohamad, Zurina and Ratnam, Chantara Thevy and Abu Bakar, Aznizam (2014) Electron beam crosslinking of EVA/ENR-50/HNTS nanocomposites in the presence of Trimethylol propane triacrylate, TMPTA. Advanced Materials Research, 970 . pp. 84-87. ISSN 1022-6680

Kamardin, Kamilia and A. Rahim, Mohamad Kamal and Samsuri, Noor Asmawati and Jalil, Mohd. Ezwan and Yuhaniz, Siti Sophiayati and Kama, Mohd. Nazri and Mohd. Yusop, Othman (2015) A parametric study of textile artificial magnetic conductor with wire dipole at 2.45ghz and 5.8ghz. In: International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC), 16-17 Nov, 2015, Melaka, Malaysia.

Kamaroddin, M. F. and Hanotu, J. and Gilmour, D. J. and Zimmerman, W. B. (2016) In-situ disinfection and a new downstream processing scheme from algal harvesting to lipid extraction using ozone-rich microbubbles for biofuel production. Algal Research, 17 . pp. 217-226. ISSN 2211-9264

Kamarrudin, Nadia (2008) Computer based safety training for semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kamaru, A. A. and Sani, N. S. and Malek, N. A. N. N. (2016) Raw and surfactant-modified pineapple leaf as adsorbent for removal of methylene blue and methyl orange from aqueous solution. Desalination and Water Treatment, 57 (40). pp. 18836-18850. ISSN 1944-3994

Kamaru, Auni Afiqah and Ahmad Jani, Nurul Soraya and Nik Malek, Nik Ahmad Nizam and Sani, Nor Suriani (2016) Adsorptive removal of methylene blue and acid orange 7 by hexadecyltrimethylammonium bromide modified rice husk. Jurnal Teknologi, 78 (3-2). pp. 113-119. ISSN 0127-9696

Kamaruddin, M. J. and Yusof, M. S. B. M. and Ngadi, N. and Zakaria, Z. Y. and Arsadb, A. and Kidam, K. (2017) Dielectric properties for extraction of orthosiphon stamineus (Java Tea) leaves. Chemical Engineering Transactions, 56 . pp. 1771-1776. ISSN 2283-9216

Kamaruddin, Mohd Johari and Mohamad, Nurulsurusiah and Asli, Umi Aisah and Ahmad Zaini, Muhammad Abbas and Kidam, Kamarizan and Hassim, Mimi Haryani (2016) The effect of conventional and microwave heating techniques on transesterification of waste cooking oil to biodiesel. Jurnal Teknologi, 78:8?? (2016). pp. 95-100. ISSN 2180-3722

Kamaruddin, Siti Nurhayati (2014) Life cycle assessment of an electroless nickel plating wastewater treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. (2004) Equilibrium Model Of Gas Adsorption On Zeolite. Proceeding of Annual Fundamental Science Seminar, 2004 . pp. 1-5.

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. (2004) Gas Adsorption Characteristics of Metal Exchanged Zeolite. Proceeding of The 10th Asian Pacific Confederation of Chemical Engineers Congress .

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. (2003) Methane adsorption characteristic dependency on zeolite structures and properties. Proceeding of ‘ The 17th Symposium of Malaysian Chemical Engineers ’ Copthorne Orchid Hotel, Penang, 29 .

Kamarudin, K. S. N. and Hamdan, H. and Mat, H. (2003) Zeolite Synthesis For Methane Adsorbent: Effect Of Experimental Conditions On Structural Framework Formation. Proceeding of ‘National Symposium of Science and Technology’ Ministry of Science, Technology, and Environmental .

Kamarudin, K. S. N. and Wah, L. M. and Yuan, C. Y. and Hamdan, H. and Mat, H. (2004) Rice Husk Based Zeolite As Methane Adsorbent. Proceeding of 18th Symposium of Malaysian Chemical Engineers�, Universiti Teknologi Petronas, . pp. 1-6.

Kamarudin, Diyana and Ali, Nora’aini and Ismail, Mahirah and Othman, Norasikin (2015) Fouling evaluation for ultrafiltration of protein-based washwater: a resistance-in-series model approach. Jurnal Teknologi, 74 (7). pp. 41-47. ISSN 2180-3722

Kamarudin, Khairul Sozana Nor (2006) Structural and gas adsorption characteristics of zeolite adsorbents. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kamarudin, Khairul Sozana Nor and Alias, Nur Hashimah (2013) Adsorption performance of MCM-41 impregnated with amine for CO2 removal. Fuel Processing Technology, 106 . pp. 332-337. ISSN 0378-3820

Kamarudin, Muhammad Saufi (2004) Configuration effects on current sharing in multicolumn zinc oxide surge arresters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamarudin, N. H. N. and Jalil, A. A. and Triwahyono, S. and Timmiati, S. N. (2016) Microwave-assisted synthesis of mesoporous silica nanoparticles as a drug delivery vehicle. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1382-1389. ISSN 1394-2506

Kamarudin, Nur Hidayatul Nazirah (2015) Modification of mesoporous silica nanoparticles for ibuprofen loading and release in drug delivery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Kamarudin, Nur Hidayatul Nazirah and Abdul Jalil, Aishah and Triwahyono, Sugeng and Artika, V. and Salleh, Norashikin F. M. and Karim, Ainul Hakimah and Jaafar, Nur Farhana and Sazegar, Mohammad Reza and Mukti, Rino Rakhmata and Hameed, Bassim Hamid and Johari, Anwar M. (2014) Variation of the crystal growth of mesoporous silica nanoparticles and the evaluation to ibuprofen loading and release. Journal of Colloid and Interface Science, 421 . pp. 6-13. ISSN 0021-9797

Kamarudin, Nur Hidayatul Nazirah and Abdul Jalil, Aishah and Triwahyono, Sugeng and Karim, Ainul Hakimah and Muhamad Salleh, Nur Fatien (2014) Synthesis of mesoporous silica nanoparticles by variation of microwave power for the ibuprofen drug delivery. In: 27th Regional Symposium of Malaysia Analytical Sciences, 8-10 Dec, 2014, Johor Bahru, Malaysia.

Kamis, Azmi and Ismail, Abdul Razak and Ismail, Issham and Khor, Siak Foo (2000) Ester-based drilling fluids toward improved filtration properties performance. Proceedings of 2nd International Conference on Advances in Strategic Technologies .

Kamsah, M. Z. and Abd. Muis, Z. and Jusoh, M. and Ngadi, N. (2004) Surviving the first year engineering programmes at Universiti Teknologi Malaysia. In: RCEE 2004.

Kamsah, Mohd. Zaki and Talib, Rohaya (2014) Engaging integrated approach in designing engineering curricula. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 190-195.

Kamsah, Nazri and Tamin, Mohd. Nasir and Kamar, Haslinda Mohamed and Lahuri, Hidayatunnur and Wagiman, Amir Nur Rashid (2012) Development of vapor pressure in fr4-copper composite material during solder reflow process. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 116-123. ISSN 0094-243X

Kamsani, Noratiqah and Md. Salleh, Madihah and Yahya, Adibah and Chong, Chun Shiong (2016) Production of lignocellulolytic enzymes by microorganisms isolated from bulbitermes sp. termite gut in solid-state fermentation. Waste and Biomass Valorization, 7 (2). pp. 357-371. ISSN 1877-2641

Kamyab, Hesam and Lee, Chew Tin and Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Mohamad, Shaza Eva and Sohrabi, Mohsen (2014) Effects of nitrogen source on enhancing growth conditions of green algae to produce higher lipid. Desalination and Water Treatment, 52 (19-21). pp. 3579-3584. ISSN 1944-3986

Kamyab, Hesam and Lim, Jeng Shiun and Khademi, Tayebeh and Wai, Shin Ho and Ahmad, Rahmalan and Hashim, Haslenda and Ho, Chin Siong and Keyvanfar, Ali and Chew, Tin Lee (2015) Greenhouse gas emission of organic waste composting: a case study of Universiti Teknologi Malaysia green campus flagship project. Jurnal Teknologi, 74 (4). pp. 113-117. ISSN 2180-3722

Kannan, Sivaneswaran Kamala (2002) Effect of rice husk ash fillers on properties and processability of abs impact modified unplasticised polyvinylchloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kanniah, K. D. and Siong, H. C. (2017) Urban forest cover change and sustainability of Malaysian cities. Chemical Engineering Transactions, 56 . pp. 673-678. ISSN 2283-9216

Kar, Ming Tan and Wai, Loan Liew and Muda, Khalida and Kassim, Mohd. Azraai (2015) Microbiological characteristics of palm oil mill effluent. In: International Congress on Chemical, Biological and Environmental Science, 7-9 May, 2015, Japan.

Karim, A. H. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Sidik, S. M. and Kamarudin, N. H. N. and Jusoh, R. and Jusoh, N. W. C. and Hameedc, B. H. (2012) Amino modified mesostructured silica nanoparticles for efficient adsorption of methylene blue. Journal of Colloid and Interface Science, 386 (1). pp. 307-314. ISSN 0021-9797

Karim, Ainul Hakimah and Abdul Jalil, Aishah and Triwahyono, Sugeng and Kamarudin, Nur Hidayatul Nazirah (2014) Multi-walled carbon nanotubes improve the physicochemical properties of mesostructured silica nanoparticles for efficient adsorption of methylene blue. In: 27th Regional Symposium of Malaysia Analytical Sciences, 8-10 Dec, 2014, Johor Bahru, Malaysia.

Karim, N. A. and Muhamad, I. I. and Pae, N. and Aziz, R. A. (2017) Effect of spray drying conditions on the antioxidant and physicochemical properties of clinacanthus nutans leaves extracts. Chemical Engineering Transactions, 56 . pp. 961-966. ISSN 2283-9216

Kashinath, Shah Aznie Ariffi (2013) Formulation of green diesel blends and finding potential chemicals as biofuels using computer-aided technique. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kashinath, Shah Aznie Ariffin and Abdul Manan, Zainuddin and Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Design of green diesel from biofuels using computer aided technique. Computers & Chemical Engineering, 41 . pp. 88-92. ISSN 0098-1354

Kasim, Farizul Hafiz (2001) Catalytic conversion of palm oil to gasoline over HZSM-5 modified with F ion catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kasmungin, Sugiatmo (2004) Penggunaan busa untuk mengawal mobiliti dalam banjiran CO2-busa. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kathirvel, K. and Rajasekar, R. and Shanmuharajan, T. and Pal, S. K. and Sathish Kumar, P. and Saravana Kumar, J. (2017) Development of calcium titanium oxide coated silicon solar cells for enhanced voltage generation capacity. Materials Science- Poland, 35 (1). pp. 181-187. ISSN 2083-1331

Kek, S. P. and Chin, N. L. and Tan, S. W. and Yusof, Y. A. and Chua, L. S. (2017) Molecular identification of honey entomological origin based on bee mitochondrial 16S rRNA and COI gene sequences. Food Control, 78 . pp. 150-159. ISSN 0956-7135

Kermani, Emad and Jahanshaloo, Leila and Che Sidik, Nor Azwadi (2013) Analysis of mixed convection of alumina-water nanofluid flow over heated cavity using lattice Boltzmann method. International Review On Modelling and Simulations, 6 (4). pp. 1350-1354. ISSN 1974-9821

Keshavarz, Meysam and Idris, Mohd. Hasbullah and Ahmad, Norhayati (2013) Mechanical properties of stabilized zirconia nanocrystalline eb-pvd coating evaluated by micro and nano indentation. Journal of Advanced Ceramic, 2 (4). 333–340. ISSN 2226-4108

Kew, Hong Chew and Klemes, Jiri Jaromir and Wan Alwi, Sharifah Rafidah and Manan, Zainuddin Abdul (2015) Process modification of Total Site Heat Integration profile for capital cost reduction. Applied Thermal Engineering, 89 . pp. 1023-1032. ISSN 1359-4311

Kew, HongChew and Kleme, Jiri Jaromir and Wan Alwi, Sharifah Rafidah and Manan, Zainuddin Abdul (2015) Process modifications to maximise energy savings in total site heat integration. Applied Thermal Engineering, 78 . pp. 731-739. ISSN 1359-4311

Khairuddin, N. and Siddique, B. M. and Muhamad, I. I. (2017) Physicochemical properties and antibacterial effect of lysozyme incorporated in a wheat-based active packaging film. Arabian Journal for Science and Engineering, 42 (6). pp. 2229-2239. ISSN 1319-8025

Khairuddin, Nozieana (2009) Wheat-based antimicrobial packaging film incorporated with lysozyme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Khairuddin, Nozieana and Muhamad, Ida Idayu (2005) Preliminary study of antimicrobial (AM) effects of starch-based film incorporated with nisin, lysozymes and lauric acid. In: SKAM -18, 12-14 September 2005, Hyatt Regency Hotel, Johor Bahru..

Khairuldean, A. K. and Ing, Tiong Chiong and Che Kob, Mohd. Salman and Budianto, Aries and Sumintono, Bambang and Tawi, Kamarul Baharin and Ariyono, Sugeng and Samion, Syahrullail (2012) Extreme pressure properties investigation of palm olein using four ball Tribotester. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 920-927. ISSN 0094-243X

Khairuldean, A. K. and Ing, Tiong Chiong and Bambang, Supriyo and Tawi, Kamarul Baharin and Yahya, Wira Jazair and Samion, Syahrullail (2012) Evaluation of oleic acid as additive in automatic transmission fluid. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 914-919. ISSN 0094-243X

Khalil, M. A. and Ahmad, A. and Abdullah, T. A. T. and Al-Shanini, A. (2016) Failure analysis using functional model and Bayesian network. Chemical Product and Process Modeling, 11 (4). pp. 265-272. ISSN 2194-6159

Khalil, M. A. R. and Ahmad, A. and Abdullah, T. A. T. and Al Shatri, A. and Al Shanini, A. (2016) Multi-state analysis of process status using multilevel flow modelling and Bayesian network. Jurnal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Khalil, Mohamed A. R. and Ahmad, Arshad and Tuan Abdullah, Tuan Amran and Ali Al-Shatri, Ali Hussein and Ali Al-Shanini, Ali Hasan (2016) Multi-state analysis functional models using Bayesian networks. Journal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Khalil Siddig, Mohamed Abdel Rahim (2017) Modeling and analysis of process failures using probabilistic functional model. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Khamis, A. K. and Asli, U. A. and Lee, C. T. and Zailani, S. N. and Sarmidi, M. R. (2017) Reduction of soil acidity for agriculture activities in Malaysian ultisols by rhodopseudomonas palustris. Chemical Engineering Transactions, 56 . pp. 667-672. ISSN 2283-9216

Khan, F. and Wahab, R. and Rashid, M. and Khan, A. and Khatoon, A. and Musarrat, J. and Al-Khedhairy, A. A. (2014) The use of carbonaceous nanomembrane filter for organic waste removal. In: Application of Nanotechnology in Water Research. Wiley Blackwell, pp. 115-152. ISBN 978-111893931-4

Khan, Mohammad Jakir Hossain and Hussain, Mohamed Azlan and Mansourpour, Zahra and Mostoufi, Navid and Ghasem, Nayef Mohamed and Abdullah, Ezzat Chan (2014) CFD simulation of fluidized bed reactors for polyolefin production - a review. Journal of Industrial and Engineering Chemistry, 20 (6). p. 3946. ISSN 1226-086X

Khan, S. M. A. and Es Saheb, M. and Mohsin, M. E. A. (2017) Fatigue life enhancement of cracked aerospace grade aluminium repaired with bonded composite patch: experimental study. Chemical Engineering Transactions, 56 . pp. 1873-1878. ISSN 2283-9216

Khani, Mojtaba and Saidina Amin, Nor Aishah and Hosseini, Seyed Nezamedin and Heidarrezaei, Mahshid (2016) Kinetics study of the photocatalytic inactivation of Escherichia coli. International Journal of Nano and Biomaterials, 6 (3-4). pp. 139-150. ISSN 1752-8933

Khoa, T. D. and Shuhaimi, M. and Hashim, Haslenda and Panjeshahi, M. H. (2010) Optimal design of distillation column using three dimensional exergy analysis curves. Energy, 35 (12). 5309 -5319. ISSN 0360-5442

Khoja, A. H. and Tahir, M. and Amin, N. A. S. (2017) Dry reforming of methane using different dielectric materials and DBD plasma reactor configurations. Energy Conversion and Management, 144 . pp. 262-274. ISSN 0196-8904

Khoo, T. C. and Wan Hassan, W. A. H. and Ismail, A. F. (2004) Development of a maintenance free tropicalized lead acid battery enhanced by membrane technology. In: Proceedings of Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bharu, Malaysia.

Khor, S. Y. and Liam, K. Y. and Loh, W. X. and Tan, C. Y. and Ng, L. Y. and Hassim, M. H. and Ng, D. K. S. and Chemmangattuvalappil, N. G. (2017) Computer Aided Molecular Design for alternative sustainable solvent to extract oil from palm pressed fibre. Process Safety and Environmental Protection, 106 . pp. 211-223. ISSN 0957-5820

Khoshtinat Nikoo, Maryam (2015) Reactant dilution effects and reaction kinetics of methane dry reforming in dielectric barrier discharge reactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Khulbe, K. C. and Ismail, A. F. and Matsuura, T. (2017) Electron paramagnetic resonance (EPR) spectroscopy. In: Membrane Characterization. Elsevier Inc., pp. 47-68. ISBN 978-044463776-5

Khulbe, Kailash Chandra and Matsuura, Takeshi and Feng, C. Y. and Ismail, Ahmad Fauzi (2016) Recent development on the effect of water/moisture on the performance of zeolite membrane and MMMs containing zeolite for gas separation; review. RSC Advances, 6 (49). pp. 42943-42961. ISSN 2046-2069

Khusnun, N. F. and Jalil, A. A. and Triwahyono, S. and Jusoh, N. W. C. and Johari, A. and Kidam, K. (2016) Interaction between copper and carbon nanotubes triggers their mutual role in the enhanced photodegradation of: P -chloroaniline. Physical Chemistry Chemical Physics, 18 (17). pp. 12323-12331. ISSN 1463-9076

Kiakalaieh, Amin Talebian (2015) Gas phase glycerol dehydration to acrolein over supported silicotungstic acid catalyst. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kiakalaieh, Amin Talebian (2012) Optimization and kinetic model for transesterification of waste cooking oil using tungstophosphoric acid catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kian, Hwa Chan and Ee, Ting Wong and Irfan, Muhammad and Idris, Ani and Mohd. Yusof, Noordin (2015) Enhanced Cu(II) rejection and fouling reduction through fabrication of PEG-PES nanocomposite ultrafiltration membrane with PEG-coated cobalt doped iron oxide nanoparticle. Journal of the Taiwan Institute of Chemical Engineers, 47 . pp. 50-58. ISSN 1876-1070

Kidam, Kamarizan (2007) UTM Degree++ Program Area: Safety & Health At Work. [Teaching Resource] (Unpublished)

Kidam, K. and Sahak, H. A. and Hassim, M. H. and Shahlan, S. S. and Hurme, M. (2016) Inherently safer design review and their timing during chemical process development and design. Journal of Loss Prevention in the Process Industries, 42 . pp. 47-58. ISSN 0950-4230

Kidam, Kamarizan and Hassin, M. H. (2008) Enhancement of inherent safety and accident prevention in chemical industry by reviewing past accidents. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 75-86. ISSN 1823-5255

Kidam, Kamarizan and Hurme, Markku (2012) Method for identifying contributors to chemical process accidents. Process Safety and Environmental Protection . ISSN 0957-5820

Kidam, Kamarizan and Hurme, Markku (2012) Origin of equipment design and operation errors. Journal of Loss Prevention in the Process Industries, 25 (6). pp. 937-949. ISSN 0950-4230

Kidam, Kamarizan and Hussin, N. E. and Hassan, Onn and Ahmad, Arshad and M. Johari, Anwar and Hurme, Markku (2014) Accident prevention approach throughout process design life cycle. Process Safety and Environmental Protection, 92 (5). p. 422. ISSN 0957-5820

Kidam, Kamarizan and Kamarden, Hamidah and Hurme, Markku and Hashim, Mimi H. and Md. Kasmani, Rafiziana (2014) Accident contributor interconnection study as a basis for accident mechanism prediction. CISAP6: 6th International Conference on Safety & Environment in Process & Power Industry, 36 . pp. 25-30. ISSN 1974-9791

Kidam, Kamarizan and Zainal Abidin, Zainazrin and Sulaiman, Zulkifly and Hashim, Mimi Haryani and Ripin, Adnan and Ali, Mohammed Wijayanuddin and M. Safuan, Hazlee and Haron, Saharudin and Othman, Norasikin and Zakaria, Zaki Yamani and Masri, Mohamad Fazli and Syed Hassan, Syed Abdul Hamid and Mat Ali, Nazruddin and Ahmad, Azman and Asri, Hairozie (2014) Current status of industrial accident learning in Malaysia. In: 3rd Scientific Conference on Occupational Safety and Health (SCI-COSH), 14-17 Oct, 2014, Johor Bahru, Malaysia.

Kidam, Kamarizan and Zainal Abidin, Zainazrin and Sulaiman, Zulkifly and Hashim, Mimi Haryani and Ripin, Adnan and Ali, Mohammed Wijayanuddin and Safuan, Hazlee M. and Haron, Saharudin and Othman, Norasikin and Zakaria, Zaki Yamani and Masri, Mohamad Fazli and Syed Hassan, Syed Abdul Hamid and Mat Ali, Nazruddin and Ahmad, Azman and Asri, Hairozie (2014) Statistical analysis of metalworking accidents within small and medium enterprises (SMEs) in Malaysia. In: 3rd Scientific Conference on Occupational Safety and Health (SCI-COSH), 14-17 Oct, 2014, Johor Bahru, Malaysia.

Kiran, S. Aditya and Arthanareeswaran, Gangasalam and Thuyavan, Y. Lukka and Ismail, Ahmad Fauzi (2015) Influence of bentonite in polymer membranes for effective treatment of car wash effluent to protect the ecosystem. Ecotoxicology and Environmental Safety, 121 . pp. 186-192. ISSN 0147-6513

Kismojohadi, Endang Listiorini (1995) Zeolite ZSM-5 and aluminophosphate molecular sieves as catalysts in the Fischer-Tropsch reaction : synthesis, characterization and modification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kofal, M. Fosi and Mustafa, A. and Ismail, Ahmad Fauzi and DashtArzhandi, M. Rezaei and Matsuura, T. (2016) PVDF/CaCO3 composite hollow fiber membrane for CO2 absorption in gas-liquid membrane contactor. Journal of Natural Gas Science and Engineering, 31 . pp. 428-436. ISSN 1875-5100

Kolundavelu, Thiyagish (2007) Inventory management using lean methodlogy for a chemical industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kolyaei, M. and Zahedi, Gholamreza and Nasef, M. M. Optimization of biodiesel production from waste cooking oil using ion exchange resins. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization (ICMSAO). IEEE XPLORE, 001-005. ISBN 978-145770005-7

Kolyaei, Maryam (2011) Optimization of biodiesel production of fatty acid esterification using ion exchange resins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kong, Bee Hong and Ismail, Aidawati Azlin and Mohd. Mahayuddin, Mohamed Ezzaham and Mohamed, Abdul Rahman and Sharif Zein, Sharif Hussein (2006) Production of high purity multi-walled carbon nanotubes produced from catalytic decomposition of methane. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kong, Helen (2017) Synthesis and characterization of surface modified banana trunk as absorbent for benzene removal from aqueous solution. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Kong, Helen and Cheu, Siew Chin and Song, Shiow Tien and Johari, Khairiraihanna and Saman, Norasikin and Mat, Hanapi (2014) Adsorptive removal of benzene from aqueous solution by surfactant modified banana trunk as adsorbents. In: 5th International Graduate Conference on Engineering, Science and Humanities, 19-21 August, 2014, Johor Bahru, Malaysia.

Kootiani, Reza Cheraghi (2015) Wellbore pressure prediction after pipe connection operation in underbalanced drilling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kormin, Saniah (2005) The effect of heat processing on triterpene glycosides and antioxidant activity of herbal pegaga (Centella asiatica l. Urban) drink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Korminouri, Fatemeh (2014) Surface modified polyvinylydene flouride hollow fiber membrane contactor with different air-gaps for carbon dioxide absorption. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Korminouri, Fatemeh and Rahbari-Sisakht, Masoud and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2015) Surface modification of polysulfone hollow fiber membrane spun under different air-gap lengths for carbon dioxide absorption in membrane contactor system. Chemical Engineering Journal, 264 . pp. 453-461. ISSN 1385-8947

Koto, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, Agoes and Abd. Kader, Ab. Saman and Ahmad, Mohd. Zamani and Ghani, Pauzi and Zamani, Zamani and Saman, Saman (2012) Effect of stern hull shape on turning circle of ships. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1191-1196. ISSN 0094-243X

Koto, Jaswar and Abdul Malik, Adi Maimun and Priyanto, Agoes and Abdul Wahid, Mazlan and Ahmad, Mohd. Zamani and Abdul Ghani, Mohamad Pauzi (2012) An integrated CFD simulation tool in naval architecture and offshore (NAO) engineering. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1175-1181. ISSN 0094-243X

Kow, Kien Woh and Yusoff, Rozita and Abdul Aziz, Abdul Raman and Abdullah, Ezzat Chan (2014) Characterisation of bio-silica synthesised from cogon grass (Imperata cylindrica). Powder Technology, 254 . pp. 206-213. ISSN 0032-5910

Krishnamurthy, P. H. and Yogarathinam, L. T. and Gangasalam, A. and Ismail, A. F. (2016) Influence of copper oxide nanomaterials in a poly(ether sulfone) membrane for improved humic acid and oil-water separation. Journal of Applied Polymer Science, 133 (36). ISSN 0021-8995

Krishnan, G. and Bidin, N. (2016) The effects of temperature on different laser transitions of neodymium orthovanadate crystal. Jurnal Teknologi, 78 (3). pp. 149-154. ISSN 0127-9696

Krishnan, Y. and Bong, C. P. C. and Azman, N.F. and Zakaria, Z. and Othman, N. and Abdullah, N. and Ho, C .S. and Lee, C .T. and Hansen, S. B. and Hara, H. (2017) Co-composting of palm empty fruit bunch and palm oil mill effluent: microbial diversity and potential mitigation of greenhouse gas emission. Journal of Cleaner Production, 146 . pp. 94-100. ISSN 0959-6526

Kristanto, Dedi (2004) Lattice gas automata simulations of a single-phase and two-phase flow in heterogeneous porous media. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kuik, Sok Ping and Salim, Naomie (2006) Optimized subtractive clustering for cluster-based compound selection. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kumar, Rajesha and Ismail, Ahmad Fauzi (2015) Fouling control on microfiltration/ultrafiltration membranes: effects of morphology, hydrophilicity, and charge. Journal of Applied Polymer Science, 132 (21). ISSN 0021-8995

Kumar, V. and Arthanareeswaran, G. and Ismail, A. F. and Jaafar, J. and Das, D. B. (2017) Nanocomposite membranes prepared from sulfonated polyether ether ketone (SPEEK) and nanocaly for enhancement of fuel cell properties. International Journal of Hydrogen Energy . ISSN 0360-3199 (In Press)

Kumoro, A. C. and Hasan, Masitah (2006) Modelling of andrographolide extraction from andrographis paniculata leaves in a soxhlet extractor. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Kunasegeran, K.Kayathre (2010) Mechanical and thermal properties of epoxidized natural rubber toughened polylactic acid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kunjirama, M. and Saman, N. and Johari, K. and Song, S. T. and Kong, H. and Cheu, S. C. and Lye, J. W. P. and Mat, H. (2017) Adsorption affinity and selectivity of 3-ureidopropyltriethoxysilane grafted oil palm empty fruit bunches towards mercury ions. Environmental Science and Pollution Research, 24 (17). pp. 15167-15181. ISSN 0944-1344

Kunjirama, Magendran (2012) Adsorption of mercury onto 3-ureidopropyltriethoxysilane grafted empty fruit bunches biosorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kusworo, T. D. and Ismail, A. F. and Aryanti, N. and Widayat, Widayat and Qudratun, Qudratun and Utomo, D. P. (2017) Enhanced anti-fouling behavior and performances of nano hybrid PES-sio2 and pes-zno membranes for produced water treatment. Jurnal Teknologi, 79 (6). pp. 129-140. ISSN 0127-9696

Kusworo, Tutuk Djoko (2008) Fabrication and characterization of flat sheet and hollow fiber mixed matrix membrane for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kusworo, Tutuk Djoko (2003) Partial oxidation and autothermal reforming of methane for hydrogen production using NiO-CoO/MgO catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kwee, L. M. and Hashim, H. and Siong, H. C. and Shin, H. W. and Shiun, L. J. (2017) Economic and environmental assessment for integrated biogas upgrading with CO2 utilization in palm oil mill. Chemical Engineering Transactions, 56 . pp. 715-720. ISSN 2283-9216

Kwee, L. M. and Hashim, H. and Ying, H. P. and Shin, H. W. and Yunus, N. A. and Shiun, L. J. (2017) Biogas generated from palm oil mill effluent for rural electrification and environmental sustainability. Chemical Engineering Transactions, 61 . pp. 1537-1542. ISSN 2283-9216

Kiakalaieh, Talebian and Saidina Amin, Nor Aishah (2015) Kinetic modeling, thermodynamic, and mass-transfer studies of gas-phase glycerol dehydration to acrolein over supported silicotungstic acid catalyst. Industrial & Engineering Chemistry Research, 54 (33). pp. 8113-8121. ISSN 0886-7798

L

Lim, Yu Han (2016) Removal of acetaminophen from aqueous solution by using activated carbon derived from spent tea leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Lee, Nicholas Yow Jeng (2016) Removal of aspirin in aqueous using activated carbon derived from spent tea leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ling, How Lie (2018) Exoproteome analysis of Bacillus lehensis G1 in ph regulation and starch utilization for screening of signal peptides for cyclodextrin glucanotransferase secretion in Escherichia coli. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Lee, Chiau Yeng (2016) Characterization and properties of sodium hydroxide/urea regenerated cellulose reinforced poly(3-hydroxybutyrate) biocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Laftah, W. A. and Hashim, S. (2013) Preparation and possible agricultural applications of polymer hydrogel composite as soil conditioner. In: Advanced Materials Research.

Laftah, Waham Ashaier (2013) Preparation and characterization of biodegradable polyacrylic acid based hydrogel for agricultural application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Laftah, Waham Ashaier (2010) Preparation and characterization of nanocomposite polymer solution based on polyacrylamide for enhanced oil recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Laftah, Waham Ashaier and Hashim, Shahrir (2014) The influence of plant natural fibers on swelling behavior of polymer hydrogels. Journal of Composite Materials, 48 (5). pp. 555-569. ISSN 0021-9983

Laftah, Waham Ashaier and Hashim, Shahrir (2014) Synthesis, optimization, characterization, and potential agricultural application of polymer hydrogel composites based on cotton microfiber. Chemical Papers, 68 (6). pp. 798-808. ISSN 0366-6352

Lai, G. S. and Lau, W. J. and Goh, P. S. and Ismail, A. F. and Yusof, N. and Tan, Y. H. (2016) Graphene oxide incorporated thin film nanocomposite nanofiltration membrane for enhanced salt removal performance. Desalination, 387 . pp. 14-24. ISSN 0011-9164

Lai, G. S. and Lau, W. J. and Goh, P. S. and Tan, Y. H. and Ng, B. C. and Ismail, A. F. (2017) A novel interfacial polymerization approach towards synthesis of graphene oxide-incorporated thin film nanocomposite membrane with improved surface properties. Arabian Journal of Chemistry . ISSN 1878-5352 (In Press)

Lai, Gwo Sung and Lau, Woei Jye and Goh, Pei Sean and Tan, Yi Hong and Ismail, Ahmad Fauzi and Zaik, Uthman and Basri, Hatijah and Rasoul, Jamshidi Gohari (2017) Preparation and characterization of superhydrophilic nanocomposite ultrafiltration membranes for treatment of highly concentrated oil-in-water emulsion. Jurnal Teknologi, 79 (1-2). pp. 53-58. ISSN 0127-9696

Lai, J. C. and Hassan, A. and Hasan, M. and Ani, F. N. and Tanjung, F. A. (2016) Heat distortion temperature and mechanical properties of agricultural wastes-reinforced phenolic composites. Journal of Polymer Engineering, 36 (6). pp. 641-647. ISSN 0334-6447

Lai, Jau Choy and Ling, Kah Ngiek and Wan Abdul Rahman, Wan Aizan (2015) Applications of starch in producing biodegradable polymer a review. In: National Conference on Wood Based Technology, Engineering and Innovation 2015 (NCWEI’15), 17-18 Nov, 2015, Kota Kinabalu, Malaysia.

Lai, L. W. and Idris, A. (2016) Comparison of steam-alkali-chemical and microwave-alkali pretreatment for enhancing the enzymatic saccharification of oil palm trunk. Renewable Energy, 99 . pp. 738-746. ISSN 0960-1481

Lai, Long Wee (2015) Lactic acid production from microwave-alkali pretreated oil palm trunk biomass using simultaneous saccharification and fermentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lai, Ping Yean (2002) Development of defect-free and ultrathin-skinned asymmetric membranes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lai, S.O. and Chong, K.C. and Kerk, Z.W. and Ooi, B.S. and Lau, W.J. (2017) Fabrication of PES/MnO mixed matrix membranes for cadmium removal. Malaysian Journal of Analytical Sciences, 21 (2). pp. 381-390. ISSN 1394-2506

Lai, Y. Q. and Manan, Z. A. and Wan Alwi, S. R. (2017) Heat exchanger network retrofit using individual stream temperature vs enthalpy plot. Chemical Engineering Transactions, 61 . pp. 1651-1656. ISSN 2283-9216

Laili, C. R. and Hamdan, S. and Azhar, M. S. and Hasham, R. (2017) Molecular arrangement of lamellar liquid crystalline structure with virgin coconut oil. Asian Journal of Chemistry, 29 (10). pp. 2129-2132. ISSN 0970-7077

Lam, Hon Loong (2004) Improved multivariate statistical process control for chemical process fault detection and diagnosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lam, Kok Keong (2013) Foams stabilized by in-situ surface activation of silica micro-particles with surfactant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Lam, Ming Quan (2017) Production and characterization of protease from halophilic virgibacillus species CD6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lam, S. S. and Wan Mahari, W. A. and Jusoh, A. and Chong, C. T. and Lee, C. L. and Chase, H. A. (2017) Pyrolysis using microwave absorbents as reaction bed: An improved approach to transform used frying oil into biofuel product with desirable properties. Journal of Cleaner Production, 147 . pp. 263-272. ISSN 0959-6526

Lani, N. S. and Ngadi, N. and Taib, M. R. (2017) Parametric study on the transesterification reaction by using cao/silica catalyst. Chemical Engineering Transactions, 56 . pp. 601-606. ISSN 2283-9216

Lani, N. S. and Ngadi, N. and Yahya, N. Y. and Rahman, R. A. (2017) Synthesis, characterization and performance of silica impregnated calcium oxide as heterogeneous catalyst in biodiesel production. Journal of Cleaner Production, 146 . pp. 116-124. ISSN 0959-6526

Lani, Nurul Saadiah (2014) Isolation and characterization of nanocellulose from empty fruit bunch fiber for nanocomposite application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lani, Nurul Saadiah and Ngadi, Norzita (2015) Biodiesel production using CaO impregnated with silica as catalyst. In: International Conference of Low Carbon Asia (ICLCA 2015), 11-12 Nov, 2015, Johor Bahru, Malaysia.

Lani, Nurul Saadiah and Ngadi, Norzita and Johari, Anwar M. and Jusoh, Mazura Amin M. (2014) Isolation, characterization, and application of nanocellulose from oil palm empty fruit bunch fiber as nanocomposites. Journal of Nanomaterials . ISSN 1687-4110

Lau, Cher H. and Chua, Lee Suan and Lee, Chew Tin and Abd. Aziz, Ramlan Abdul (2015) Fractionation of rosmarinic acid from crude extract of Orthosiphon stamineus by solid phase extraction. Journal of Engineering Science and Technology, 10 . pp. 104-112. ISSN 1823-4690

Lau, W. J. and Ismail, A. F. and Razis, M. and Ng, B. C. and Goha, P. S. and Latip, R. A. and Othman, N. H. (2013) Investigation on the thermal stability of refined palm oil produced from membrane-based refining technique. Journal of Membrane and Separation Technology, 2 (4). pp. 206-212. ISSN 1929-6037

Lau, W. J. and Ismail , Ahmad Fauzi (2010) Application of response surface methodology in pes/speek blend NF membrane for dyeing solution treatment. Membrane Water Treatment, 1 (1). pp. 49-60. ISSN 2005-8624

Lau, Woei Jye (2008) Perparation, characterization and performance evaluation of negatively charged nanofiltration membrane for dyeing wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lau, Woei Jye and Ismail, Ahmad Fauzi and Firdaus, S. (2013) Car wash industry in Malaysia: treatment of car wash effluent using ultrafiltration and nanofiltration membranes. Separation and Purification Technology, 104 . pp. 26-31. ISSN 1383-5866

Law, Kian Meng (2002) Selective leaching of silver from selected semiconductor waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Law, Hoi Ling (2007) The effect of lauric acid as antimicrobial agent in chitosan-based packaging film. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Lawal, Musa and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) A systematic method for cost-effective carbon emission reduction in buildings. Journal of Applied Sciences, 12 (11). pp. 1186-1190. ISSN 1812-5654

Lawal, Sirajo (2013) Optimization of operating volume of microbioreactor using attainable region approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lazim, N. A. M. and Muhamad, I. I. (2017) Encapsulation of Vitamin E using maltodextrin/Sodium Caseinate/Selenomethionine and its release study. Chemical Engineering Transactions, 56 . pp. 1951-1956. ISSN 2283-9216

Le , Thi Ngoc Tram (2004) Pervaporation of isopropanol using chitosan-zeolite a membranes : the effects of zeolite a concentration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Kha Ling and Mohd Nawawi, Mohd Ghazali and Sadikin, Aziatul Niza (2008) Pervaporation of ethanol-water mixture using PVA zeolite-clay membranes. Jurnal Teknologi (49F). pp. 167-177. ISSN 0127-9696

Lee, Suan Chua and Sarmidi, Mohamad Roji (2006) Effect of solvent and initial water content on (R, S)-1-phenylethanol resolution. Enzyme and Microbial Technology, 38 (3-4). pp. 551-556. ISSN 0141-0229

Lee, C. T. and Ismail, M. N. and Razali, F. and Muhamad, I. I. and Sarmidi, M. R. and Khamis, A. K. (2008) Application of effective microorganisms on soil and maize. Journal of Chemical & Natural Resources Engineering, 2 . pp. 1-13. ISSN 1823-5255

Lee, C. T. and Klemes, J. J. and Hashim, H. and Ho, C. S. (2016) Mobilising the potential towards low-carbon emissions society in Asia. Clean Technologies and Environmental Policy, 18 (8). pp. 2337-2345. ISSN 1618-954X

Lee, C. T. and Middelberg, Anton (2001) Protein refolding in an oscillatory-flow-mixing reactor. In: The Proceeding of the 10th European Congress on Biotechnology, 8-11th July 2001, Madrid, Spain.

Lee, Chew Tin (2003) Intensification of inclusion body purification and protein refolding. PhD thesis, University of Cambridge, London, Churchill College, Department of Chemical Engineering.

Lee, Chew Tin and Buswell, A. Mark and Middleberg, P. J. (2002) The influence of mixing on lysozyme renaturation during refolding in an oscillatory flow and a stirred-tank reactor. Chemical Engineering Science, Volume 57, Issue 10 (10). pp. 1679-1684.

Lee, Chew Tin and Hashim, Haslenda and Chin, Siong Ho and Klemes, Jiri Jaromir (2016) Low-carbon Asia: technical contributions to an ambitious goal for sustainability. Clean Technologies and Environmental Policy, 18 (8). pp. 2335-2336. ISSN 1618-954X

Lee, Chew Tin and Hashim, Haslenda and Lim, Jeng Shiun and Ho, Wai Shin and Tan, Sie Ting and Yan, Jin Yue (2014) SMART: an integrated planning and decision support tool for solid waste management. Computer Aided Chemical Engineering, 33 . pp. 271-276. ISSN 1570-7946

Lee, Chiau Yeng and Wahit, Mat Uzir and Othman, Norhayani (2015) Thermal and flexural properties of regenerated cellulose (RC)/Poly(3- hydroxybutyrate)(PHB) biocomposites. In: The World Virtual Conference on Applied Sciences and Engineering Applications, 27-29 Mac, 2015, Johor Bahru, Malaysia.

Lee, Chiau Yeng and Wahit, Mat Uzir and Othman, Norhayani (2015) Thermal and flexural properties of regenerated cellulose(RC)/poly(3- hydroxybutyrate)(PHB)biocomposites. Jurnal Teknologi, 75 (11). pp. 107-112. ISSN 0127-9696

Lee, Ching Yaw (2010) Effect of variables on the production of red-fleshed pitaya powder using response surface methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Cho Hing (1999) Risk management study on gas transmission system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Cindy Ik Sing (2018) Sustainability performance assessment of municipal solid waste management utilising aggregated indicators approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Lee, David Ik Bing (2001) Development of asymmetric polyacrylonitrile carbon hollow fiber membrane for oxygen/nitrogen gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Jun You (2013) Extraction and identification of proteins and their antioxidant activities from Acacia, Tualang and Gelam honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, L. B. and Mat, Hanapi (2007) Biodegradation of oily wastes-a review on used lubricants. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 219-268. ISBN 978-983-52-05972-2

Lee, L. Z. and Ahmad Zaini, M. A. (2016) Metal chloride salts in the preparation of activated carbon and their hazardous outlook. Desalination and Water Treatment, 57 (34). pp. 16078-16085. ISSN 1944-3994

Lee, L. Z. and Zaini, M. A. A. (2017) Equilibrium and kinetic adsorption studies of reactive orange onto resorcinol-formaldehyde carbon gel. Chemical Engineering Transactions, 56 . pp. 811-816. ISSN 2283-9216

Lee, Lin Zhi and Ahmad Zaini, Muhammad Abbas (2015) Metals chloride-activated castor bean residue for methylene blue removal. Jurnal Teknologi, 74 (7). pp. 65-69. ISSN 2180-3722

Lee, Lin Zhi and Ahmad Zaini, Muhammad Abbas (2015) Potassium carbonate-treated palm kernel shell adsorbent for congo red removal from water. Jurnal Teknologi, 75 (1). pp. 233-239. ISSN 0127-9696

Lee, M. Y. and Wai, Shin Ho and Hashim, Haslenda and Abdul Muis, Zarina and Wen, Hui Liu and Mohammad Rozali, Nor Erniza (2017) Application of electric system cascade analysis for various system configuration. Chemical Engineering Transactions, 61 . pp. 943-948. ISSN 2283-9216

Lee, Ming Yang and Hashim, Haslenda and Liu, Wen Hui and Ho, Wai Shin (2016) Extended electric system cascade analysis (ESCA) for a carbon constraint energy generation system. In: The 8th International Conference on Applied Energy (CAE2016), 2016.

Lee, Suan Chua and Abdul Rahaman, Norul Liza and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2012) Multi-elemental composition and physical properties of honey samples from Malaysia. Food Chemistry, 135 (3). pp. 880-887. ISSN 0308-8146

Lee, Sze Yean (2008) Effect of bore fluid and post treatment on polyethersulfone ultrafiltration hollow fiber membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lee, Tin Sin (2010) Simulation and experimental characterizations of polyvinyl alcohol-cassava starch compound for injection moulding application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Tin Sin and Bee, Soo Tueen and Tee, Tiam Ting and Kadhum, Abdul Amir Hassan and Ma, Chi and Rahmat, Abdul Razak and Veerasamy, P. (2013) Characterization of α-tocopherol as interacting agent in polyvinyl alcohol-starch blends. Carbohydrate Polymers, 98 (2). pp. 1281-1287. ISSN 0144-8617

Lee, Tin Sin and Bee, Soo-Tueen and Ang, Rui-Ren and Tee, Tiam-Ting and Phang, Siew-Wei and Rahmat, Abdul Razak (2015) Interaction simulation and experimental physico-mechanical analysis of distinct polarity blends of polyethylene and polyvinyl alcohol. Journal of Polymer Engineering, 35 (5). pp. 423-435. ISSN 0334-6447

Lee, Tin Sin and Ng, Lin-Huey and Bee, Soo-Tueen and Tee, Tiam-Ting and Rahmat, Abdul Razak and He, Wei (2015) Factorial design investigation on two-way quaternary factors of thermal aging of chlorinated nitrile latex tensile properties. Journal of Elastomers and Plastics, 47 (3). pp. 232-247. ISSN 0095-2443

Lee, Tin Sin and Rahmat, Abdul Razak and Wan Abdul Rahman, Wan Aizan and Zhao, Yan Sun and Abd Samad, Adlina (2010) Rheology and thermal transition state of polyvinyl alcohol-cassava starch blends. Carbohydrate Polymers, 81 (3). 737 -739. ISSN 0144-8617

Lee, Tin Sin and Wan Abd. Rahman, Wan Aizan and Rahmat, Abdul Razak and Samad, A. A. (2010) Computational modeling and experimental infrared spectroscopy of hydrogen bonding interactions in polyvinyl alcohol-starch blends. Polymer, 51 (5). 1206 - 1211. ISSN 0032-3861

Lee, Tin Sin and Wan Abdul Rahman, Wan Aizan and Rahmat, Abdul Razak and Morad, Noor Azian and Salleh, Mohd. Shahrul Nizam (2010) A study of specific heat capacity functions of polyvinyl alcohol-cassava starch blends. International Journal of Thermophysics, 31 (3). 525 - 534. ISSN 0195-928X (Print) 1572-9567 (Online)

Lee, Ting Hun (1999) Conversion of sugar in pineapple waste to citric acid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, X. and Wahit, M. U. and Adrus, N. (2016) Biodegradable and temperature-responsive thermoset polyesters with renewable monomers. Journal of Applied Polymer Science, 133 (40). ISSN 0021-8995

Lee, Xiau Yeen (2017) Synthesis and characterization of biodegradable and thermoresponsive poly(1,8-Octanediol-glycerol-1,12-Dodecanedioate) and its composites for tissue engineering applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Lee, Xiau Yeen and Wahit, Mat Uzir (2015) Synthesis of biodegradable polyester by polycondensation with tunable properties. In: Advanced Materials Research, 2015.

Lee, Yun Fook (2016) Effect of design peak flow factor to the capital cost of sewerage reticulation in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Chee Hong (2004) Parameter and strutural retrofit of palm oil fatty acid fractionation process for improved productivity and energy efficiency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, CT and Mackley, MR and Stonestreet, P and Middelberg, APJ (2001) Protein refolding in an oscillatory flow reactor. Biotechnology Letter, 23 . pp. 1899-1901.

Lee, Kuan Yet and Ahmed, Iqbal and Idris, Ani and Mat Zain, Norashikin (2007) Production of flat and hollow fiber membranes for Biodialysis application. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Leong, Pei Pei (2015) Production and optimization of indole-3-actic acid by rhodopseudomonas palustris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leong, Wah Heng (2001) Model-based fault detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leow, Chee Who (2011) Purification of fusion peptide biosurfactant using combined chemical extraction and cross-flow microfiltration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lertwittayanon, K. and Youravong, W. and Lau, W. J. (2017) Enhanced catalytic performance of Ni/Α-Al2O3 catalyst modified with CaZrO3 nanoparticles in steam-methane reforming. International Journal of Hydrogen Energy, 42 (47). pp. 28254-28265. ISSN 0360-3199

Liew, Chong Wai (2007) Genome sequence survey of locally isolated alkalophilic Bacillus sp.G1 : isolation of alkaline tolerant gene, sodium/proton antiporter gene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah (2014) Total site heat integration targeting algorithm incorporating plant layout issues. Computer Aided Chemical Engineering, 33 . pp. 1801-1806. ISSN 1570-7946

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2015) Total site heat integration using absorption chillers for district cooling. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), 27 Sept-2 Oct, 2015, Croatia.

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah and Lim, Jeng Shiun and Varbanov, Petar Sabev (2014) Total site heat integration incorporating the water sensible heat. Journal of Cleaner Production, 77 . pp. 94-104. ISSN 0959-6526

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin (2013) Centralised utility system planning for a total site heat integration network. Computers & Chemical Engineering, 57 . pp. 104-111. ISSN 0098-1354

Liew, Syh Yeh (2003) ChemDEx web-based data exchange system in chemical process industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Liew, W. H. and Hassim, M. H. and Ng, D. K. S. (2016) Systematic framework for sustainability assessment on chemical production pathway: basic engineering stage. Process Safety and Environmental Protection, 104 . pp. 161-177. ISSN 0957-5820

Liew, W.H. and Hassim, M.H. and Ng, D.K.S. (2016) Sustainability assessment framework for chemical production pathway: uncertainty analysis. Journal of Environmental Chemical Engineering, 4 (4). pp. 4878-4889. ISSN 2213-3437

Liew, Weng Hui (2016) Inherent safety health environment and economic assessment for sustainable chemical process design: Biodiesel case study. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Liew, Weng Hui and Hassim, Mimi Haryani and Denny, K. S. Ng (2014) Sustainability assessment for biodiesel production via fuzzy optimisation during research and development (R&D) stage. Clean Technologies and Environmental Policy, 16 (7). pp. 1431-1444. ISSN 1618-954X

Liew, Weng Hui and Hassim, Mimi Haryani and Ng, Denny K.S. and Hurme, Markku (2012) Fuzzy optimization for screening of sustainable chemical reaction pathways. Chemical Engineering Transactions, 29 . pp. 529-534. ISSN 1974-9791

Lim, Chee Siang and Abd. Manan, Zainuddin and Sarmidi, Mohamad Roji (2003) Simulation modeling of the phase behavior of palm oil-supercritical carbon dioxide. JAOCS, Journal of the American Oil Chemists' Society, 80 (11). pp. 1147-1156. ISSN 1558-9331

Lim, J. W. and Hassan, A. and Rahmat, A. R. and Wahit, M. U. (2006) Rubber-Toughened Polypropylene Nanocomposite: Effect of Polyethylene Octene Copolymer on Mechanical Properties and Phase Morphology. Journal of Applied Polymer Science, 99 (6). pp. 3441-3450. ISSN 1097-4628

Lim, Wan Piang and Ahmad, Arshad (2002) Mathematical Modelling And Simulation Of Heat Dispersion Due To Fire And Explosion. Jurnal Teknologi F (37F). pp. 15-26. ISSN 0127-9696

Lim, Ai Tee (2007) Modeling of Insulin Binding System Using Artificial Neural Network. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Lim, Chia Ching (2002) The performance of an adsorptive recirculated packed bed batch reactor in the enzymatic synthesis of ampicillin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Fang Yee (2002) MATRIX : a new systematic technique for retrofit of heat exchanger network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, J. C. and Thevarajoo, S. and Selvaratnam, C. and Goh, K. M. and Shamsir, M. S. and Ibrahim, Z. and Chong, C. S. (2017) Global transcriptomic response of Anoxybacillus sp. SK 3-4 to aluminum exposure. Journal of Basic Microbiology, 57 (2). pp. 151-161. ISSN 0233-111X

Lim, Jeng Shiun and Abdul Manan, Zainuddin and Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2014) Synthesis of a sustainable integrated rice mill complex. Journal of Cleaner Production, 71 . pp. 118-127. ISSN 0959-6526

Lim, Jian Wei (2006) Development of layered silicates montmorillonite filled rubber-toughened polypropylene nanocomposites (RTPPNC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim, Jian Wei and Hassan, Azman and Rahmat, Abd Razak and Wahit, Mat Uzir (2006) Mechanical behaviour and fracture toughness evaluation of rubber toughened polypropylene nanocomposites. Plastics, Rubber and Composites Processing and Applications, 35 (1). pp. 37-46. ISSN 0959-8111

Lim, Jian Wei and Hassan, Azman and Rahmat, Abdul Razak and Wahit, Mat Uzir (2008) Phase morphology and mechanical properties of rubber-toughened polypropylene nanocomposites: Effect of elastomer polarity. Polymer-Plastics Technology and Engineering, 47 (4). pp. 411-419.

Lim, Kian Sheng and Buyamin, Salinda and Ibrahim, Zuwairie (2011) An analysis of diversity for vector evaluated particle swarm optimization based on ZDT test problems. In: Control Design & Optimization Techniques: Series 1/2011. Penerbit UTM Press, Skudai, Johor, pp. 203-214. ISBN 978-967-354-183-6

Lim, L. Y. and Bong, C. P. C. and Lee, C. T. and Klemel, J. J. and Sarmidi, M. R. and Lim, J. S. (2017) Review on the current composting practices and the potential of improvement using two-stage composting. Chemical Engineering Transactions, 61 . pp. 1051-1056. ISSN 2283-9216

Lim, Lee Ping (2001) Extraction and membrane purification of base oil from used lubricant oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Li Yee (2015) Physicochemical and microbial profile of oil palm empty fruit bunches compost treated with effective microorgnisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Li Yee and Chua, Lee Suan and Lee, Chew Tin (2015) Effects of microbial additive on the physiochemical and biological properties of oil palm empty fruit bunches compost. In: The 27th Symposium of Malaysian Chemical Engineers (SOMCHE 2014) in Conjunction with the 21st Regional Symposium on Chemical Engineering (RSCE 2014), 29-30 Oct, 2013, Selangor, Malaysia.

Lim, M. M. and Sultana, N. (2017) Comparison on in vitro degradation of polycaprolactone and polycaprolactone/gelatin nanofibrous scaffold. Malaysian Journal of Analytical Sciences, 21 (3). pp. 627-632. ISSN 1394-2506

Lim, Pey Ser (2011) Effect of chain extender on physical and mechanical properties of poly(butylene terephthalate)/recycled glass-filled-poly(ethylene terephthalate)blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Poh Choon (2002) Development of hollow fiber membrane gas separation network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Serena Sue Lynn (2003) A study on the extraction of lutein from selected locally grown vegetation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim, Sin Yang (2002) Combustion efficiency of palm wates in spouting and bubbling fluidised bed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Song Hok (2015) Pinch-based targeting for production planning for small and medium enterprise. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Lim, Teck Peng (2003) Computer modeling to optimize gas supply for domestic sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Wan Piang (2005) Inferential estimation and control of chemical processes using partial least squares based model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim , Chee Siang (2004) Simulation modelling and development of a new process for the production of high quality palm oil based on supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, J. W. and Hassan, Azman and Abu Bakar, Aznizam (2002) Effect of methyl methacrylate grafted natural rubber-49 on mechanical properties of filled calcium carbonate unplasticised PVC. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Lim , Leornard Lik Pueh (2004) Hydraulic performance of membrane bioreactor (MBR) for palm oil mill effluent treatment (POME) under aerobic conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, J. W. and Hassan, Azman and Wahit, Mat Uzir and Rahmat, Abdul Razak (2004) Rubber Toughened Polypropylene Nanocomposite: Effect of Compatibilizer Content on Mechanical Properties. In: Malaysian Chemical Congress 2004 (MCC 2004) , 27-29 September 2004, Sunway Pyramid Convention Centre, Petaling Jaya.. (Unpublished)

Lin Kam, K. and Weng Ow, T. and Yong Chia, W. and Bakhteri, R. and Ramli, N. and Wen Hau, Y. (2016) SoC-based biomedical embedded system design of arrhythmia detector. Jurnal Teknologi, 78 (7-5). pp. 123-134. ISSN 0127-9696

Ling, Lay Pee and Leow, Heng Fatt and Sarmidi, Mohamad Roji (2002) Citric acid concentration by electrodialysis: Ion and water transport modelling. Journal of Membrane Science, 199 (1-2). pp. 59-67. ISSN 0376-7388

Ling, H. L. and Rahmat, Z. and Murad, A. M. A. and Mahadi, N. M. and Illias, R. M. (2017) Data for proteome analysis of Bacillus lehensis G1 in starch-containing medium. Data in Brief, 14 . pp. 35-40. ISSN 2352-3409

Ling, H. L. and Rahmat, Z. and Murad, A. M. A. and Mahadi, N. M. and Illias, R. M. (2017) Proteome-based identification of signal peptides for improved secretion of recombinant cyclomaltodextrin glucanotransferase in Escherichia coli. Process Biochemistry, 61 . pp. 47-55. ISSN 1359-5113

Ling, Jacky Jia Yii (2013) Effect of bottom ash on the strength characteristics of fly ash and bottom ash mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Lay Pee (1999) Concentrating citric acid and sodium citrate using electrodialysis membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ling, Lay Pee (2002) A study on citric acid and sodium citrate recovery using electrodialysis process with ion exchange membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ling , Leong Yau (2004) Plantwide control of a fatty acid fractionation process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lingli, Deng and Cheng, Kian Kai and Jiyang, Dong and Julian, L. Griffin and Zhong, Chen (2012) Non-negative principal component analysis for NMR-based metabolomic data analysis. Chemometrics and Intelligent Laboratory Systems, 118 . pp. 51-61. ISSN 0169-7439

Liu, W. H. and Kaliappan, K. and Alwi, S. R. W. and Lim, J. S. and Ho, W. S. (2016) power pinch analysis supply side management: strategy on purchasing and selling of electricity. Clean Technologies and Environmental Policy, 18 (8). pp. 2401-2418. ISSN 1618-954X

Liu, Wen Hui and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Liew, Peng Yen and Ho, Wai Shin (2017) Technical & economic evaluation of district cooling system as low carbon alternative in Kuala Lumpur City. Chemical Engineering Transactions, 56 . pp. 529-534. ISSN 2283-9216

Liu, Wen Hui and Wan Alwi, Sharifah Rafidah and Hashim, Haslenda and Ab Muis, Zarina (2016) Optimal design and sizing of integrated centralized and decentralized energy systems. In: 8th International Conference on Applied Energy (ICAE2016), 08-11 Oct, 2016, Beijing, China.

Lo, Po Kim and Hassan, Osman and Ahmad, Arshad and Mahadi, Nor Muhammad and Illias, Rosli Md (2007) Excretory over-expression of Bacillus sp. G1 cyclodextrin glucanotransferase (CGTase) in Escherichia coli: Optimization of the cultivation conditions by response surface methodology. Enzyme and Microbial Technology, 40 (5). pp. 1256-1263. ISSN 0141-0229

Loh, Pei Shian (2009) Production and purification of monoclonal IgG using protein G affinity chromatography from hybridoma cell culture in serum-free medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Long, Wee Lai and Idris, Ani (2013) Disruption of oil palm trunks and fronds by microwave-alkali pretreatment. Bioresources, 8 (2). pp. 2792-2804. ISSN 1930-2126

Looi, Yat Seong (2005) Comparison of fluidised bed and spouted bed for the combustion of rice husk. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Low, J. H. and Andenan, N. and Rahman, W. A. W. A. and Rusman, R. and Majid, R. A. (2017) Evaluation of rice straw as natural filler for injection molded high density polyethylene bio-composite materials. Chemical Engineering Transactions, 56 . pp. 1081-1086. ISSN 2283-9216

Low, Jiun Hor (2015) Isolation, characterization and preparation of spent coffee ground tannin as eco-friendly wood adhesives. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Low, Jiunhor and Wan Abdul Rahman, Wan Aizan and Jamaluddin, Jamarosliza (2015) Structural elucidation of tannins of spent coffee grounds by CP-MAS C-13 NMR and MALDI-TOF MS. Industrial Crops and Products, 69 . pp. 456-461. ISSN 0926-6690

Lye, J. W. P. and Saman, N. and Sharuddin, S. S. N. and Othman, N. S. and Mohtar, S. S. and Md. Noor, A. M. and Buhari, J. and Cheu, S. C. and Kong, H. and Mat, H. (2017) Removal performance of tetracycline and oxytetracycline from aqueous solution via natural zeolites: an equilibrium and kinetic study. Clean - Soil, Air, Water, 45 (10). ISSN 1863-0650

Lye, Jimmy Wei Ping (2015) Adsorptive coagulation-flocculation removal of antibiotics in sewage treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lye, Jimmy Wei Ping and Sharuddin, Siti Shilatul Najwa and Othman, Nurul Sakinah and Fadziyana, Azmi and Saman, Norasikin and Johari, Khairiraihanna and Song, Shiow Tien and Endud, Salasiah and Mat, Hanapi (2014) Characterization of natural zeolite for adsorptive removal of antibiotics from aqueous solution. In: 8th South East Asian Technical University Consortium (SEATUC) Symposium, 4-5 March, 2014, Johor Bahru, Malaysia.

Lynd, Lee Rybeck and Abdul Aziz, Ramlan and de Brito Cruz, Carlos Henrique and Abel Chimphango, Annie Fabian and Cortez, Luis Augusto Barbosa and Faaij, Andre and Greene, Nathanael and Keller, Martin and Osseweijer, Patricia and Richard, Tom L. and Sheehan, John and Chugh, Archana and van der Wielen, Luuk and Woods, Jeremy and van Zyl, Willem Heber (2011) A global conversation about energy from biomass: the continental conventions of the global sustainable bioenergy project. Interface Focus, 1 (2). pp. 271-279. ISSN 2042-8901

M

Mamat, Che Rozid and Wan Salleh, Wan Norharyati and A. Khalid, Izzah Hanisah (2015) Synthesis of Ets-4 mixed matrix membranes for gas separation. In: 5th International Conference and Workshops on Basic and Applied Sciences, 16-17 Oct, 2015, Indonesia.

Md. Akhir, Farhana Shakira (2017) Rigid polyurethane-palm oil based polyol/kenaf fibre biocomposite foam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Misbah, Maznah (2016) In vitro release of enzymes and surfaces morphology of enzyme coated pelleted goat feed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Tia, Sakinah (2017) Preparation and characterization of poly(vinyl alcohol) / starchcomposite films reinforced with graphene and graphene oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Majidnia, Zohreh (2015) Combined maghemite - titania nanoparticles embedded in polyvinyl alcohol-alginate beads for heavy metals and radioactive ions removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Norodin, Nur Salsabila (2016) Optimization of β-sitosterol from SWIETENIA MAHAGONI seeds extract using supercritical carbon dioxide (SC-CO2) extraction and its anti-diabetic activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mamat, Che Rozid and Leaw, Wai Loon (2015) Bi^LaJ e03 nanoparticles doped liquid crystal physical gel for electrooptic display. In: 5th International Conference and Workshops on Basic and Applied Sciences, 16-17 Oct, 2015, Indonesia.

Mohidem, Nur Atikah (2018) Biodegradation of alkanolamines in batch and packed-bed reactors using free laccase and sol-gel laccase. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

M, Haziq and Ngadi, Norzita and M, Zurina (2011) Development of hybrid nano-sol gel coatings for corrosion protection of carbon steel. In: International Chemical And Environmental Engineering Conference.

M., Mahadevan and Sim, W. K. and Ling, L. P. and M. Y., Zainal Abidin and S., Mohamad Roji (2002) Penyediaan dan pencirian membran pertukaran anion bagi proses elektrodialisis. Jurnal Teknologi F (36F). pp. 43-54. ISSN 0127-9696

M. Amin, Sri Yulis and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Fayyaz, Abdolali and Heng, Shye Yunn (2014) Characterization of the feedstock properties of metal injection-molded WC-Co with palm stearin binder system. Sains Malaysiana, 43 (1). pp. 123-128. ISSN 0126-6039

M. Mokhtar, Mutahharah and Taib, M. Rozainee and Hassim, Mimi H. (2016) Decision analysis of multi-pollutant control strategy for coal-fired power plant in Malaysia. Clean Technologies and Environmental Policy, 18 (5). pp. 1361-1367. ISSN 1618-954X

M. S., Meor Yusoff and Muslim, Masliana and Choo, Tye Foo and Murshidi, Julie Andrianny (2006) High purity alumina and zeolite from local low grade kaolin. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

M. Sultan Suhai Buddeen, Mumtaz and Abdul Hamid, Mariani and Md. Salleh, Liza (2016) Effect of storage temperature on face serum stability. In: 6th International Conference on Biotechnology for the Wellness Industry 2016 (ICBWI 2016), 16-17 Aug, 2016, Melaka, Malaysia.

M. Zahari, M. Shahrir and Ismail, Shahrul and Ibrahim, Mohd. Zamri and Su, Shiung Lam and Mat, R. (2013) Study of enhanced reactive extraction process using ultrasonication for Jatropha curcas seed. In: Applied Mechanics and Materials, 30-31 Oct, 2013, Melaka, Malaysia.

Maarasyid, Cici and Muhamad, Ida Idayu and Supriyanto, Eko (2014) Potential source and extraction of Vitamin E from palm-based oils: a review. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 43-50. ISSN 0127-9696

Maarof, Hasmerya and Hasan, Mohamed Noor and Tengku Ab. Ghani, Tengku Fazarina (2015) Multivariate analysis of perfume quality based on fragrance based note properties. In: International Congress on Chemical, Biological and Environmental Sciences, 7-9 May, 2015, Japan.

Mad, Ramli and Samsudin, Rubyatul Adawiyah and Mohamed, Mahadhir and Johari, Anwar M. and Kamaruddin, Mohd. Johari and Ali, Asmadi H. (2013) Trans-esterification of triglycerides with methanol on sulfated zirconia prepared with different concentration of sulfuric acid. In: International Conference on Mechanical Engineering, ICOME 2013, 19-21 Sep, 2013, Mataram, Lombok, Indonesia.

Maftoun, Parisa (2012) Efficient exopolysaccharaide production by pleurotus ostreatus in submerged culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mahamad, Mohammed Nabil (2015) Activated carbon from pineapple waste biomass for the removal of methylene blue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahamad, Mohammed Nabil and Ahmad Zaini, Muhammad Abbas and Zakaria, Zainul Akmar (2015) Preparation and characterization of activated carbon from pineapple waste biomass for dye removal. International Biodeterioration and Biodegradation, 102 . pp. 274-280. ISSN 0964-8305

Mahani, Mahani (2010) Biosorption of gold(III), palladium(II) and silver(I) from aqueous solution onto low-cost durio zibethinus husk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahat, Mohd. Khairizal (2002) Siklodekstrin glukanotransferase daripada bakteria alkalofilik bacillus sp. TS1-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahat, Naji Arafat Rafat and Meor Ahmad, Zainal Abidin and Wahab, Roswanira Abdul (2015) Presence of faecal coliforms and selected heavy metals in ice cubes from food outlets in Taman Universiti, Johor Bahru, Malaysia. Tropical Biomedicine, 32 (3). pp. 471-477. ISSN 0127-5720

Mahdi, Taha H. and Ahmad, Arshad and Ripin, Adnan and El Sayed Nasef, Mohamed Mahmoud (2014) Vapor-liquid equilibrium of ethanol/ethyl acetate mixture in ultrasonic intensified environment. Korean Journal of Chemical Engineering, 31 (5). pp. 875-880. ISSN 0256-1115

Mahdi, Taha H. and Ahmad, Arshad and Ripin, Adnan and Nasef, Mohamed Mahmoud (2015) Separation of azeotropic mixture using multi-stage ultrasound-assisted flash distillation. Chemical Product and Process Modeling, 10 (4). pp. 237-242. ISSN 2194-6159

Mahmood, N.A.N. and Ghazali, N.F. and Ibrahim, K.A. and Ali, M.A. (2017) Anodic pH Evaluation on performance of power generation from palm oil empty fruit bunch (EFB) in dual chambered microbial fuel cell (MFC). Chemical Engineering Transactions, 56 . pp. 1795-1800.

Mahmoud El-Sayed Nasef, Mohamed and Yahaya, Abdul Hamid (2009) Adsorption of some heavy metal ions from aqueous solutions on Nafion 117 membrane. Desalination, 49 (2). pp. 677-681. ISSN 0011-9164

Mahmoud Nasef, Mohamed and Saidi, Hamdani and Mohd. Dahlan, Khairul Zaman (2010) Acid-synergized grafting of sodium styrene sulfonate onto electron beam irradiated-poly(vinylidene fluoride) films for preparation of fuel cell membrane. Journal of Applied Polymer Science, 118 (5). 2801 - 2809.

Mahmud, H. N. M. Ekramul (1998) Catalytic cracking of palm oil to liquid fuels over various Y-Type zeolites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahmud, Hafizah (2013) Enhanced secretion of cyclodextrin glucanotransferase in lactococcus lactis using heterologous signal peptide and optimization of induction condition for cultivation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahmud, K. N. and Yahayu, M. and Sarip, S. H. Md. and Rizan, N. H. and Min, C. B. and Mustafa, N. F. and Ngadiran, S. and Ujang, S. and Zakaria, Z. A. (2016) Evaluation on efficiency of pyroligneous acid from palm kernel shell as antifungal and solid pineapple biomass as antibacterial and plant growth promoter. Sains Malaysiana, 45 (10). pp. 1423-1434. ISSN 0126-6039

Mahmud, Mahmud (1997) Kajian pendarflour beberapa sebatian daripada pohon kelapa sawit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mahmud, S. M. Sohel and Ahmed, Ishtiaque and Hoque, Md. Shamsul (2014) Road safety problems in bangladesh: achievable target and tangible sustainable actions. Jurnal Teknologi, 70 (4). pp. 43-49. ISSN 0127-9696

Mailin, M. and Firdausi, R. (2007) The kinetics of phenol degradation by immobilized pseudomonas sp in a repeated-batch process. Malaysian Apllied Biology, 36 (1). pp. 73-78. ISSN 0126-8643

Mailin, M. and Razali, Firdausi (2006) High performance phenol degrading microorganisms isolated from wastewater and oil-contaminated soil. Malaysia Journal Of Microbiology, 2 (2). pp. 32-36. ISSN 9834240708

Majeed, K. and Hassan, A. and Abu Bakar, A. (2017) Barrier, biodegradation, and mechanical properties of (rice husk)/(Montmorillonite) hybrid filler-filled low-density polyethylene nanocomposite films. Journal of Vinyl and Additive Technology, 23 (3). pp. 162-171. ISSN 1083-5601

Majeed, K. and Hassan, A. and Bakar, A. A. and Jawaid, M. (2016) Effect of montmorillonite (MMT) content on the mechanical, oxygen barrier, and thermal properties of rice husk/MMT hybrid filler-filled low-density polyethylene nanocomposite blown films. Journal of Thermoplastic Composite Materials, 29 (7). pp. 1003-1019. ISSN 0892-7057

Majid, F. A. A. and Teh, L. C. and Abdullah, S. H. A. S. and Ahmad, R. A. and Taher, M. and Wahid, M. E. A. (2016) Preclinical evidence of Malay traditional herbal supplement for diabetes. Acta Horticulturae, 1125 . pp. 255-262. ISSN 0567-7572

Majid, Z. A. and Mohsin, R. and Long, T. F. (2015) Experimental and numerical investigation of high-pressure water jetting effect toward NPS8 natural gas pipeline integrity-establishing safety distance perimeter. In: Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry. Elsevier Inc., pp. 267-290. ISBN 978-008100126-4

Majid, Z. A. and Mohsin, R. and Yusof, C. M. Z. (2011) Erosive wear of natural gas pipes due to high velocity jet impact : physical examination and experimental study. Jurnal Teknologi, 56 (1). pp. 1-25. ISSN 0127–9696

Majid, Z. A. and Mohsin, R. and Yusof, C. M. Z. (2011) Erosive wear of natural gas pipes due to high velocity jet impact: computer simulation study. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 27-52. ISSN 0127-9696

Majidnia, Z. and Idris, A. (2016) Synergistic effect of maghemite and titania nanoparticles in PVA-alginate encapsulated beads for photocatalytic reduction of Pb(II). Chemical Engineering Communications, 203 (4). pp. 425-434. ISSN 0098-6445

Majidnia, Zohreh and Idris, Ani (2015) Evaluation of cesium removal from radioactive waste water using maghemite PVA-alginate beads. Chemical Engineering Journal, 262 . pp. 372-382. ISSN 1385-8947

Majidnia, Zohreh and Idris, Ani (2015) Removal of barium from radioactive aqueous solution by PVA-alginate encapsulated titanium oxide using sunlight and other light types. RSC Advances, 5 (78). pp. 63588-63595. ISSN 2046-2069

Majidnia, Zohreh and Idris, Ani and Valipour, Peiman (2013) Evaluation of antibacterial properties of leather treated with silver nanoparticles. Jurnal Teknologi (Sciences and Engineering), 60 . pp. 5-8. ISSN 0127-9696

Mak, Weng Yee (2005) Fault detection and diagnosis using correlation coefficients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Makhtar, S. N. N. M. and Rahman, M. A. and Ismail, A. F. and Othman, M. H. D. and Jaafar, J. (2017) Preparation and characterization of glass hollow fiber membrane for water purification applications. Environmental Science and Pollution Research, 24 (19). pp. 15918-15928. ISSN 0944-1344

Malek, Muhammad Khairuddin (2015) Bioprocessing development for anaerobic cultivation of probiotic bacteria bifidobacterium longum for high cell mass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Malek, Muhammad Khairuddin and Abd. Malek, Roslinda and Othman, Nor Zalina and Aziz, Ramlan and Mohamed Abdelrahman, Hassan Mohamed and El-Enshasy, Hesham Ali Metwally (2014) Bioprocess development for anaerobic cultivation of probiotic bacteria bifidobacterium longum for high cell mass production. In: 5th International Conference on Biotechnology for the Wellness Industry "Wellness For Health And Productivity: New Trend and Opportunities', 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Malek, R. A. and Malek, M. K. and Othman, N. Z. and Ramli, S. and Aziz, R. and El Enshasy, H. A. (2016) Optimization of production medium for high cell mass production and the functional characteristics study of bifidobacterium longum WICC B34. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Mamat, Nor Sasha Izana (2012) Silver inhibition on recombinant flavin reductase from Citrobacter freundii A1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Mamat, Nur Suriani (2013) Improving cuttings lifting performance using styrene divinylbenzene microsphere in foam drilling fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Man, Sarimah and Junin, Radzuan and Samsuri, Ariffin and Mohamed Osman, Adil (2000) Properties study of a local bentonite as an additive in oil and gas industry. In: AMER 2000, 4-5 October 2000, UiTM, Shah Alam, Selangor.

Man Singh, Harjit Kaur (2005) Zeolite-supported transition metal catalysts to enhance the ozonation of aqueous phenol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Manan, Z. A. and Alwi, S. R. W. (2012) Holistic and versatile process integration framework for maximising resource efficiency. Chemical Engineering Transactions, 29 . pp. 55-60. ISSN 1974-9791

Manan, Z. A. and Alwi, S. R. W. (2015) Supply and demand planning and management tools toward low carbon emissions. In: Assessing and Measuring Environmental Impact and Sustainability. Elsevier Inc., pp. 451-477. ISBN 978-012802233-7

Manan, Z. A. and Tea, S. Y. and Alwi, S. R. W. (2009) A new technique for simultaneous water and energy minimisation in process plant. Chemical Engineering Research & Design, 87 (11A). pp. 1509-1519. ISSN 1509-1519

Manas, N. H. A. and Bakar, F. D. A. and Md. Illias, R. (2016) Computational docking, molecular dynamics simulation and subsite structure analysis of a maltogenic amylase from Bacillus lehensis G1 provide insights into substrate and product specificity. Journal of Molecular Graphics and Modelling, 67 . pp. 1-13. ISSN 1093-3263

Manickam, Yamuna and Mad Nordin, Mariam Firdhaus and Wannahari, R. and Iqbal, Nida and Mohd. Shariff, Amir Husni and Khattak, Muhammad Adil (2015) Comparison and characterization of different types of durian husk as activated carbon. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20-22 Apr, 2015, Kuala Lumpur, Malaysia.

Manikandan, A. and Manikandan, E. and Meenatchi, B. and Vadivel, S. and Jaganathan, S. K. and Ladchumananandasivam, R. and Henini, M. and Maaza, M. and Aanand, J. S. (2017) Rare earth element (REE) lanthanum doped zinc oxide (La: ZnO) nanomaterials: synthesis structural optical and antibacterial studies. Journal of Alloys and Compounds, 723 . pp. 1155-1161. ISSN 0925-8388

Manshad, S. and Nawawi, M. G. M. and Hassan, H. B. and Sazegar, M. R. (2017) Fabrication of hybrid membranes by different techniques. Chemical Engineering Transactions, 56 . pp. 1279-1284. ISSN 2283-9216

Manshor, Hanisah and Zahirani, Ahmad and Azhar, Ahmad and Abd. Rashid, Rashita and Sulaiman, Shazreen and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effects of Cr2O3 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina added with TiO2 (ZTA–TiO2) ceramic composite. International Journal of Refractory Metals and Hard Materials, 61 . pp. 40-45. ISSN 0263-4368

Mansor, A.F. and Mohidem, N.A. and Wan Mohd Zawawi, W.N.I. and Othman, N.S. and Endud, S. and Mat, H. (2016) The optimization of synthesis conditions for laccase entrapment in mesoporous silica microparticles by response surface methodology. Microporous and Mesoporous Materials, 220 . pp. 308-314.

Mansor, Azmi Fadziyana (2011) Enzymatic hydrolysis of cellulose in citronella bagasse for glucose production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mansor, Azmi Fadziyana (2016) In-situ entrapment of laccase in mesoporous silica microparticles for degradation of oxyteracycline. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mansor, Azmi Fadziyana and Mohidem, Nur Atikah and Wan Mohd. Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Endud, Salasiah and Mat, Hanapi (2015) Preparation and characterization of in situ entrapment of laccase in silica microparticles via an ambient drying procedure. Journal of Sol-Gel Science and Technology, 75 (2). pp. 323-335. ISSN 0928-0707

Mansor, Azmi Fadziyana and Mat, Hanapi and Ahmad Shamsuri, Nur Afiqah and Mohidem, Nur Atikah (2011) Biodegredation of dye using free laccase and sol-gel laccase. In: Regional Annual Fundamental Science Symposium (RAFSS 2011).

Mansourizadeh, A. and Ismail, Ahmad Fauzi (2010) Effect of additives on the structure and performance of polysulfone hollow fiber membranes for CO2 absorption. Journal of Membrane Science, 348 (1 - 2). 260 - 267. ISSN 0376-7388

Mansourizadeh, Amir (2010) Development of hollow fiber membranes for carbon dioxide absorption in gas-liquid membrane contactors. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2010) Effect of LiCl concentration in the polymer dope on the structure and performance of hydrophobic PVDF hollow fiber membranes for CO2 absorption. Chemical Engineering Journal, 165 (3). 980 - 988. ISSN 1385-8947

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2008) Effects of fabrication parameters on the morphology of porous polysulfone hollow fiber membranes. Jurnal Teknologi, 49F . pp. 81-89. ISSN 0127-9696

Mansourizadeh, Amir and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2010) Effect of operating conditions on the physical and chemical CO2 absorption through the PVDF hollow fiber membrane contactor. Journal of Membrane Science, 353 (1 - 2). 192 - 200. ISSN 0376-7388

Mansur, S. and Othman, M. H. D. and Ismail, A. F. and Sheikh Abdul Kadir, S. H. and Kamal, F. and Goh, P. S. and Hasbullah, H. and Ng, B. C. and Abdullah, M. S. (2016) Investigation on the effect of spinning conditions on the properties of hollow fiber membrane for hemodialysis application. Journal of Applied Polymer Science, 133 (30). ISSN 0021-8995

Mansur, Sumarni (2016) Preparation and characterisation of biocompatible polyethersulfone-based hollow fibre membrane for haemodialysis application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Marliana, M. M. and Hassan, A. and Yuziah, M. Y. N. and Khalil, H. P. S. A. and Inuwa, I. M. and Syakir, M. I. and Haafiz, M. K. M. (2016) Flame retardancy, Thermal and mechanical properties of Kenaf fiber reinforced Unsaturated polyester/Phenolic composite. Fibers and Polymers, 17 (6). pp. 902-909. ISSN 1229-9197

Masngut, Al Nasratun and Takriff, Mohd. Sobri and Mohammad, Abdul Wahab and Kalil, Mohd. Sahaid and Hassan Kadhum, Abdul Amir (2006) Performance of oscillatory flow reactor and stir tank reactor in solvent fermentation from palm oil mill effluent. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Masoud Eid, Ahmad Mustafa (2015) Improvement of anti-inflammation of swietenia macrophylla self nanoemulsion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Masoud Eid, Ahmad Mustafa and Hasham @ Hisam, Rosnani and Abdul Hamid, Mariani and Ariffin, Farah Diana and Elmarzugi, Nagib Ali (2014) Development and stability evaluation of olive oil nanoemulsion using sucrose ester. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Masri, Mohd. Helmi Johari and Othman, Nor Zalina and Abd. Malek, Roslinda and Aziz, Ramlan and Elsayed, Elsayed A. and Wadaan, Mohammad A. M. and El-Enshasy, Hesham Ali Metwally (2014) Optimization of exopolysaccharide production by pleurotus ostreatus using diffrent cultivation strategies. In: 5th International Conference on Biotechnology for the Wellness Industry (ICBWI), 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Mat, Hanapi and Othman, Norasikin and Ali, Noorhalieza (2006) Selective emulsion liquid membrane extraction of silver from photographic waste industries. Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Mat, Hanapi and Samsuri, Ariffin and Wan Abdul Rahman, Wan Aizan and Othman, Norasikin and Chieng, Yu Yuan and Jong, Siaw Chuan and Zulkania, Ariany (2005) Study on demulsifier formulation for treating Malaysian crude oil emulsion. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Zakaria, Zainal and Yusoff, Zulkarnain (2006) Heat and mass transfer studies in liquefied petroleum gas storage operations. Project Report. Faculty of Chemical and Natural Resources Engineering, Skudai, Johor. (Unpublished)

Mat, Ramli and Amin, Nor Aishah Saidina and Ramli, Zainab and W. Abu Bakar, W. Azelee (2000) Reactivity Of Incoporated Copper In Boronzsm-5 Zeolite For Methane Conversion To Higher Hydrocarbons. methane . pp. 1-10. (Unpublished)

Mat, Hanapi and Mat, Ramli and Othman, Norashikin (1998) Selective nickel recovery from the spent catalyst. In: Simposium Kimia Analisis Kebangsaan ke Sebelas , 6-7 Oktober, 1988, Fakulti Sains, Universiti Teknologi Malaysia.

Mat, Hanapi and Saman, Norasikin and Johari, Khairiraihanna and Song, Shiow Tien (2014) Removal of Hg(II) and CH3Hg(I) using rasped pith sago residue biosorbent. Clean-Soil Air Water, 42 (11). p. 1548. ISSN 1863-0650

Mat, Hanapi and Tang, B. S. and Y., Yuliusman and Othman, Norashikin (1999) Selective extraction of silver from semiconductor waste. In: World Engineering Congress 1999, 19-22 July 1999, Kuala Lumpur.

Mat, Hanapi and Zakaria, Zainal and Mohd. Norddin, Mohd. Noorul Anam and Tan, Siu Ming and Terry, George Paou (2000) The development of adsorbent based natural gas storage for vehicle application. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Mohtar, Safiah Syazana and Tengku Malim Busu, Tengku Nur Zulaikha (2011) A complete isolation of cellulose, hemicellulose and lignin from palm oil trunk (POT). In: Regional Annual Fundamental Science Symposium (Rafss 2011).

Mat, Ramli (2006) Modification of zeolite Hzsm-5 for methane conversion to higher hydrocarbons. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat, Ramli and Ali, A. (2008) Catalytic studies of Boron-HZSM-5 zeolite for methane conversion to higher hydrocarbons. Journal of Chemical and Natural Resources Engineering, 2 . pp. 146-152. ISSN 1823-5255

Mat, Ramli and Amin, Nor Aishah Saidina and Ramli, Zainab and Abu Bakar, W. Azelee W. (2006) Ethylene conversion to higher hydrocarbon over copper loaded BZSM-5 in the presence of oxygen. Journal of Natural Gas Chemistry, 15 (4). pp. 259-265. ISSN 1003-9953

Mat, Ramli and Ani, Farid Nasir and Mushtaq, Faisal (2014) Pyrolysis of solid palm waste biomass with microwave absorber under microwave irradiation. Applied Mechanics and Materials, 606 . pp. 73-77. ISSN 1660-9336

Mat, Ramli and Buhari, Junaidah and Mohamed, Mahadhir and Johari, Anwar M. and Tuan Abdullah, Tuan Amran and Ali, Asmadi H. (2014) Preparation of Ni loaded on zeolite and its application for conversion of glycerol to hydrogen. Advanced Materials Research, 845 . pp. 457-461. ISSN 1022-6680

Mat, Ramli and Othman, Siti Norbainah and Johari, Anwar and Hassim, Mimi Haryani and Wan Sulaiman, Wan Rosli (2015) NaOH treated spent bleaching earth. Jurnal Teknologi, 76 (5). pp. 115-118. ISSN 2180-3722

Mat, Ramli and Saidina Amin, Nor Aishah (2007) Conversion of methane to useful chemical and fuels. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 18-40. ISBN 978-983-52-05972-2

Mat, Ramli and Saidina Amin, Nor Aishah and Ramli, Zainab and W. Abu Bakar, W. Azelee (2006) Ethylene conversion to higher hydrocarbon over copper loaded BZSM-5 in the presence of oxygen. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mat, Ramli and Samsudin, Rubyatul Adawiyah and Mohamed, Mahadhir and Johari, Anwar M. and Kamaruddin, Mohd. Johari and Ali, Asmadi H. (2014) Trans-esterification of triglycerides with methanol on sulfated zirconia prepared with different concentration of sulfuric acid. Advances in Applied Mechanics and Materials, 493 . pp. 15-20. ISSN 1660-9336

Mat, Ramli and Tian Fuw, Lau (2007) Production of biodiesel using heterogeneous catalyst. In: Advances in Chemical Engineering. Penerbit UTM , Johor, pp. 1-17. ISBN 978-983-52-05972-2

Mat Akhir, Nor Azurah (2011) The survival and growth of human ovarian carcinoma cell line post treatment with ficus deltoidea extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Ali, Mohamad Faizul (2015) Evaluation of waterflooding using carbonated water for oil recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mat Ali, Mohamad Faizul and Junin, Radzuan and Md. Aziz, Nor Hidayah and Salleh, Adibah (2014) Carbonated water injection for recovery of oil and wettability analysis. In: Applied Mechanics and Materials, 7 Nov, 2014, Kuala Lumpur, Malaysia.

Mat Desa, M. S. Z. and Hassan, A. and Arsad, A. and Arjmandi, R. and Mohammad, N. N. B. (2016) Influence of rubber content on mechanical, thermal, and morphological behavior of natural rubber toughened poly(lactic acid)-multiwalled carbon nanotube nanocomposites. Journal of Applied Polymer Science, 133 (48). ISSN 0021-8995

Mat Desa, Mohd. Shaiful Zaidi and Hassan, Azman and Arsad, Agus and Mohammad, Nor Nisa Balqis (2015) Mechanical and thermal properties of rubber toughened poly(lactic acid). In: Advanced Materials Research From the 2nd International Materials, Industrial, And Manufacturing Engineering Conference (MIMEC 2015), February 4-6, 2015, Bali, Indonesia, 4-6 Feb, 2015, Indonesia.

Mat Hassan, Mohd Arif Hakimi and Muda, Khalida and Toemen, Susilawati and Yusof, Nur Zulaikha and Anuar, Aznah Nor and Siti Hanna, Siti Hanna and Othman, Mohd. Nor and Md. Said, Mohd. Ismid and Mohamed, Maketab and Affam, A. C. (2015) Rhizofiltration for the enhancement of biofuel production. In: Malaysian Technical Universities Conference on Engineering and Technology 2015, 11-13 Oct, 2015, Johor Bahru, johor.

Mat Isa, Anida (2004) Penghasilan dan pencirian eksopolisakarida daripada Bacillus lichenformis S20A. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Isa, Naurah (2006) Injection moulding parameters and performance of rice husk-high density polyethylene composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Isa, Naurah and Jamaluddin, Jamarosliza and Mat Jidin, Mazni and Wan A. Rahman, Wan Aizan (2002) Oil Palm Frond (OPF) or Coir Fiber (CF): Effect of particle sizes on the tensile properties and morphology of natural fiber reinforced HDPE. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Mat Nah, Muhammad Sayuti (2011) Co-digestion of palm oil mill effluent (pome) with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Nawi, Zalina (2007) Targeting minimum power requirement based on direct mechanical power transfer for a large scale chemical complex. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Nayan, Nadirul Hasraf (2010) Characterization and biodegradability of foam based on coconut flesh waste-filled high density polyethylene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Noh, Mazmir and Tamin, M. N. and Iqbal, Nida and Kazi, S. and Khattak, M. A. (2015) Effect of artificially produced pit-like defects on the strength of AISI 410 stainless steel compressor blades. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Mat Nor, Mohd. Shukri and Abd. Manan, Zainuddin and Mustaffa, Azizul Azri and Chua, Lee Suan (2015) Prediction of the solubility of caffeic acid in water using an activity coefficient model. In: The 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Mat Rafi, Ainatul Mardiah and Ramli, Zainab (2015) Modified desilicated natural zeolite as catalyst for Knoevenagel reaction. In: Proceeding Chemistry Undergraduate Final Year Project Symposium, 1 Jan-31 Aug, 2015, Johor Bahru, Johor.

Mat Rani, Zulkafli (2014) Production of polyhydroxybutyrate during the treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Taher, Zarani (2009) Optimization of processing parameters for curcuma xanthorriza oleorasin yield and its antioxidant activity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mat Yusof, Nur Nadia and Othman, Norhayani and Samsudin, Sani Amril (2015) The effect of halloysite and boron nitride as nucleating agents on the crystallization of poly (3- hydroxybutyrate). In: Malaysia Polymer International Conference (MPIC2015), 10-11 June, 2015, Kuala Lumpur, Malaysia.

Mat, Hanapi and Busairi, Abdullah Moch (1999) Production of organic acids from local raw materials. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Othman, Norasikin (2006) Liquid membrane extraction of silver from photographic waste. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mat, Hanapi and Y., Yuliusman and Othman, Norasikin (1999) Selective nickel recovery from spent catalyst. In: World Engineering Congress 1999, 19-22 July 1999, Kuala Lumpur.

Mataram, A. and Ismail, A. F. and Yuliwati, E. and Matsuura, T. and Rizal, S. and Zamheri, A. (2016) Stand-alone water treatment: performance of electrospun nanofibers. Jurnal Teknologi, 78 (12). pp. 103-107. ISSN 0127-9696

Mataram, Agung (2012) Synthesis, characterization and optimization of polyacrylonitrile electrospun nanofiber membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Matinja, Idris Adamu (2016) Optimization of biodiesel production from POME using lipase immobilized in PVA-alginate-sulfate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Matmin, Juan (2011) Preparation of silica-based porous materials from starch-derived low molecular weight organic gelator template. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Matsuura, T. and Feng, C. and Khulbe, K. C. and Rana, D. and Singh, G. and Gopal, R. (2010) Development of novel membranes based on electro-spun nanofibers and their application in liquid filtration, membrane distillation and membrane adsorption. Membrane Special Issue: Nanofiber Membrane, 35 (3). pp. 119-127. ISSN 03851036

Maya Sarah, Maya Sarah (2015) Effects of time and temperature on process and crude palm oil quality with microwave irradiation sterilization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mayahi, Alireza and Ilbeygi, Hamid and Ismail, Ahmad Fauzi and Jaafar, Juhana and Wan Daud, Wan Ramli and Emadzadeh, Daryoush and Shamsaei, Ezzatollah and Martin, Darren J. and Rahbari-Sisakht, Masoud and Ghasemi, Mostafa and Zaidi, Javaid (2015) SPEEK/cSMM membrane for simultaneous electricity generation and wastewater treatment in microbial fuel cell. Journal of Chemical Technology and Biotechnology, 90 (4). pp. 641-647. ISSN 0268-2575

Mazangi, Mojtaba (2013) Gasification of empty fruit brunch in micro fixed bed reactor for hydrogen production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mazher, Mohammed I. and Zainal Alam, Muhd. Nazrul Hisham and Kouzani, Abbas and Gibson, Ian (2017) Fabrication of microfluidic devices: improvement of surface quality of CO2 laser machined poly(methylmethacrylate) polymer. Journal of Micromechanics and Microengineering, 27 (1). 015021-015021. ISSN 0960-1317

Mazhorova, A. and Clerici, M. and Peccianti, M. and Ho, S. P. and Razzari, L. and Jestin, Y. and Pasquazi, A. and Tomasino, A. and Markov, A. and Piccoli, R. and Busacca, A. and Ali, J. and Morandotti, R. (2016) Asymmetric dual-grating micro-slit configuration for broadband solid state coherent detection of THz pulses. In: Conference on Lasers and Electro-Optics, CLEO 2016, 5 June 2016 through 10 June 2016, San Jose; United States.

Mazlan, Hamimah Satirah (2011) Nutritional analysis and effects of variables on protein extraction from perah seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mazlan, Hamimah Satirah and Muhamad, Ida Idayu and Hassan, Nor Diana and Tan, Nuraimi Azlan Hadi (2014) Optimization of protein extraction from fermented and non fermented Perah seed by using response surface methodology. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 29-33. ISSN 2180-3722

Mazlan, Nurul Aiyshah and Abd. Kadir, Hasannuddin and Mohamad, Zahari and Yahya, Wira Jazair (2015) Requirement for real-time water emulsion fuel supply system (RTES) concept design. In: Asian Design Engineering Workshop, 29-30 Oct, 2015, Hong Kong.

Ma’amor, Azman and Abd. Hamid, Sharifah Bee (2006) Combinatorial technology in heterogenous copper-based catalysis. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Md Yusof, Aminah and Chia, C.H. and Wood, Abdul Khalik (2007) Speciation of Cr(III) and Cr(VI) in surface waters with a Chelex-100 resin column and their quantitative determination using inductively coupled plasma mass spectrometry and instrumental neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry, 273 (3). pp. 533-538. ISSN 0236-5731

Md Yusof, Aminah and Rahman, M.M. and Wood, Abdul Khalik (2004) Speciation of some trace elements in water samples after preconcentration on activated carbon by neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry, 259 (3). pp. 479-484. ISSN 0236-5731

Md Yusof, Aminah and Yanta, N.F. and Wood, Abdul Khalik (2004) The use of bivalves as bio-indicators in the assessment of marine pollution along a coastal area. Journal of Radioanalytical and Nuclear Chemistry, 259 (1). pp. 119-127. ISSN 0236-5731

Md Yusof, Aminah and Rahman, M.M. and Wood, Abdul Khalik (2007) Adsorption of some toxic elements from water samples on modified activated carbon, activated carbon and red soil using neutron activation analysis. Journal of Radioanalytical and Nuclear Chemistry, 271 (1). pp. 191-197. ISSN 0236-5731

Md., A. A. and Amir, A. O. (2008) Formation damage using palm oil ester based drilling fluid. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 92-100. ISSN 1823-5255

Md. Akhir, Farhana Shakira and Dzulkifli, Mohd. Haziq and Nik Pauzi, Nik Nurfatmah and Abd. Majid, Rohah (2014) Effects of silicone surfactant on the water absorption and surface morphology of rigid palm oil-based polyurethane foam. In: World Virtual Conference on Advanced Research in Mechanical and Materials Engineering 2014, 18-22 March, 2014, Skudai, Johor.

Md. Akhir Farhana, Shakira and Dzulkifli, Mohd. Haziq and Nik Pauzi, Nik Nurfatmah Pz. and Abd. Majid, Rohah (2014) Effects of silicone surfactant on the water absorption and surface morphology of rigid palm oil-based polyurethane foam. Applied Mechanics and Materials, 554 . pp. 185-188. ISSN 1660-9336

Md. Aripin, Nafizah (2010) Screening of factors influencing biobutanol production from pineapple waste using 2-level factorial design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Md. Arshad, S. H. and Ngadi, N. and Aziz, A. A. and Amin, N. S. and Jusoh, M. and Wong, S. (2016) Preparation of activated carbon from empty fruit bunch for hydrogen storage. Journal of Energy Storage, 8 . pp. 257-261. ISSN 2352-152X

Md. Arshad, Siti Hadjar (2013) Preparation of activated carbon from oil palm empty fruit bunch for adsorption of phenol and hydrogen. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Buang, Mohd. Ammarul Affiq (2014) Adsorption of arsenate by hexadecylpyridinium bromide modified natural zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Illias, Rosli and Ooi, Seok Wei and Idris, Ahmad Kamal and Wan Abdul Rahman, Wan Aizan (2001) Isolation and characterization of halotolerant aerobic bacteria from oil reservoir. Jurnal Teknologi C (35C). pp. 1-10. ISSN 0127-9696

Md. Illias, Rosli and Reid, Graeme A. and A. Wahab, Nadzarah (2001) Comparison Of The Amino Acid Sequence Of L-Mandelate Dehydrogenase From Rhodotorula Graminis With Other L-2-Hydroxyacid Dehydrogenase Enzyme And Its Primary Structure Prediction. Jurnal Teknologi C (34C). pp. 25-34. ISSN 0127-9696

Md. Illias, Rosli and A. Rahman, Roshanida and Razali, Firdausi and Mohd. Fuzi, Siti Fatimah Zaharah and Md. Jahim, Jamaliah (2014) Simplified feeding strategies for the fed-batch cultivation of Kluyveromyces lactis GG799 for enhanced recombinant xylanase production. Bioprocess and Biosystems Engineering, 37 (9). pp. 1887-1898. ISSN 1615-7591

Md. Illias, Rosli and Jonet, Mohd. Anuar and Low, Kheng Oon (2011) Escherichia coli extracellular secretion system an efficient protein production system for superior recovery of protein at reduced cost. In: Biomalaysia 2011 : Conference & Exhibition 2011 Pacific Rim Summit On Industrial Biotechnology And Bioenergy.

Md. Illias, , Rosli and Goh, Kian Mau and Mahadi, Nor Muhammad and Ismail, Ahmad Fauzi and Hassan, Osman (2008) From gene to process : CGtase as a role model. In: Special Topics in Bioprocess Engineering. Penerbit UTM , Johor, pp. 35-68. ISBN 978-983-52-0602-4

Md. Ismail, Norhairani (2009) Solid state fermentation of palm kernel cake for the production of beta-mannanase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Kasmani, Rafiziana and Andrews, G. E. and Phylaktou, H. N. (2013) Experimental study on vented gas explosion in a cylindrical vessel with a vent duct. Process Safety and Environmental Protection, 91 (4). pp. 245-252. ISSN 0957-5820

Md. Kasmani, Rafiziana and Andrews, Gordon E. and Phylaktou, Herodotos N. (2010) The influence of vessel volume and equivalence ratio in vented gas explosion. Chemical Engineering Transactions, 19 . pp. 463-468. ISSN 2283-9216

Md. Naimi, Fardelen (2004) Penyingkiran boron daripada airsisa menggunakan kombinasi rawatan secara osmosis balikan dan penjerapan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Nazri, Marshabila (2009) Development of an extrusion foaming process for foam biocomposites based on empty fruit bunch (EFB) filled-high density polyethylene (HDPE). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Noor, Norhazilan and Yahaya, Nordin and Othman, Siti Rabe'ah (2008) The effect of extreme corrosion defect on pipeline remaining life-time. Malaysian Journal of Civil Engineering, 20 (1). pp. 47-57. ISSN 1823-7843

Md. Norodin, Nur Muhamad El Qarni (2011) Plant microbial fuel cell (PMFC) : preliminary studies on development and power generation. In: International Congress of the Malaysian Society for Microbiology 2011 (ICMSM2011).

Md. Othman, Siti Nur Atiqah and Basar, Norazah and Sarker, Satyajit D. (2015) In-vitro antioxidant activities of the fruits peel of citrus macroptera Mont. Var. Annamensis. In: International Conference on Natural Products, 24-25 March, 2015, Johor Bahru, Johor.

Md. Piah, Md. Afendi and Darus, Ahmad and Hassan, Azman (2002) Effect of ATH fillers on the surface tracking and erosion resistance of natural rubber-LLDPE blends. In: 3rd National Symposium on Polymeric Materials 2002, 30-31 December 2002, UTM Skudai.

Md. Saad, Suhaiza (2008) Pozzolanic activity of rice husk and its application in the production of lightweight mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Salleh, Liza and Hartati, Hartati and Jamaludin, Roslina and Che Yunus, Mohd. Azizi and Yakub, Harisun and Abdul Aziz, Azila (2014) Antioxidant activity and total phenolic contents in methanol extracts from Swietenia mahagoni and andrographis paniculata. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 51-53. ISSN 0127-9696

Md. Salleh, Liza and Mohd. Nasir, Hasmida and Yaakob, Harisun and Che Yunus, Mohd. Azizi (2014) Determination of supercritical carbon dioxide extraction parameters for quercus infectoria galls and the effects on extraction yield and antioxidant activity. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 1-4. ISSN 0127-9696

Md. Salleh, Liza (2001) Production of soy sauce powder : an aroma retention study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Sarip, Mohd. Sharizan (2012) Subcritical water extraction of 6-gingerol and 6-shogaol from zingiber officinale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Sarip, Mohd. Sharizan and Morad, Noor Azian and Yamashita, Yoshiyuki and Tsuji, Tomoya and Che Yunus, Mohd. Azizi and Abd. Aziz, Mustafa Kamal and Lam, Hon Loong (2016) Crude palm oil (CPO) extraction using hot compressed water (HCW). Separation and Purification Technology, 169 . pp. 103-112. ISSN 1383-5866

Md. Shahrodin, Nur Shazrynda (2014) Synthesis and characterization of cassava starch nanocrystals by hydrolysis method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Shukri, Dyia Syaleyana (2013) Solidification of floating dispersed organic droplets and ionic liquid microextraction methods for the determination of non-steroidal anti-inflammatory drugs in human urine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Tab, M. and Hashim, N. H. F. and Abu Bakar, F. D. and Illias, R. and Najimudin, N. and Mahadi, N. M. and Murad, A. M. A. (2017) Characterization and potential applications of a recombinant antifreeze protein from an antarctic yeast Glaciozyma antarctica produced in Pichia pastoris. Malaysian Applied Biology, 46 (1). pp. 213-218. ISSN 0126-8643

Md. Wahi, Nurhazerin (2016) Optimization of biodegradable sago-based film formulation for food packaging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Yasir, Suhaimi (1996) The effects of several cocoa fermentation parameters on the formation of flavour precursors during fermentation and pyrazines during roasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Yassin, A. A. and Ghazali, M. N. (2008) Using low sulfate seawater during water injection to avoid scaling problem. Journal of Chemical & Natural Resources Engineering, 2 . pp. 91-99. ISSN 1823-5255

Md. Yassin,, Abu Azam and Md. Ali, Nasly and Merdhah, Amer Badr (2008) Formation damage due to scale formation in porous media resulting from water injection. In: Recent Advances: Scale Formation in Oil Reservoir During Water Injection. Penerbit UTM , Johor, pp. 9-23. ISBN 978-983-52-0594-6

Md. Yunos, Khairul Faezah (2002) Recovery of citric acid from simulated multicomponent broth using electrodialysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Yusof, Fahmi Asyadi (2011) Mechanical, thermal and morphological properties of MICA filled polycarbonate/acrylonitrile butadiene styrene blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Zaki, Nurul Asyikin (2009) Microwave and microwave - vacuum drying of papaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Zaki, Nurul Asyikin and A. Darim, Rosmaria and Md. Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of Osmotic Dehydration Parameters on Papain Enzyme Activity of Carica papaya L. In: 4th Food Science and Technology Seminar 2005, 23 July 2005, USM Penang.

Md. Zamani, Siti Haizum and Yahya, Norshafika and Zakaria, Zaki Yamani and Jusoh, Mazura (2015) Fractional freezing of ethanol and water mixture. Jurnal Teknologi, 74 (7). pp. 49-52. ISSN 2180-3722

Mel, Maizirwan and Sarmidi, Mohd. Roji and Abdul Aziz, Ramlan (2002) The growth rate of haemophilus paragallinarum profile in shake flask fermentation ; determination [substrate] critical. Jurnal Teknologi F (36F). pp. 55-60. ISSN 0127-9696

Mel, Maizirwan (2001) Development of infectious coryza vaccine : optimization and scale-up studies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Merdhah, Amer Badr and Mohd Yassin, Abu Azam (2009) Solubility of common oil field scales of injection water and high-barium concentration and high-salinity formation water. Jurnal Teknologi, 50 (F). pp. 67-77. ISSN 2180-3722

Merdhah, Amer and Mohd. Yassin, Abu Azam (2007) Barium sulfate scale formation in oil reservoir during water injection at high-barium formation water. Journal of Applied Sciences, 7 (17). pp. 2393-2403. ISSN 1812-5654 (Print)

Merdhah, Amer and Mohd. Yassin, Abu Azam (2007) Scale formation in oil reservoir during water injection at high-salinity formation water. Journal of Applied Sciences, 7 (21). pp. 3198-3207. ISSN 1812-5654 (Print)

Meysam Davoody, (2012) Neuro fuzzy and hybrid modeling of supercritical fluid extraction of Pimpinella Anisum L. seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mezher, Osamah Abdul Ameer (2014) Background radiation measurements in the contaminated area with depleted uranium at Al-Nasiriyah station of electricity distribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mienda, B.S. and Shamsir, M.S. and Illias, R.Md. (2016) Model-guided metabolic gene knockout of gnd for enhanced succinate production in Escherichia coli from glucose and glycerol substrates. Computational Biology and Chemistry, 61 . pp. 130-137.

Mienda, B. S. and Shamsir, M. S. and Md. Illias, R. (2016) Model-aided atpE gene knockout strategy in Escherichia coli for enhanced succinic acid production from glycerol. Journal of Biomolecular Structure and Dynamics, 34 (8). pp. 1705-1716. ISSN 0739-1102

Ming Twang, S. and Zaini, M. A. A. and Salleh, L. M. and Yunus, M. A. C. and Naushad, M. (2017) Potassium hydroxide-treated palm kernel shell sorbents for the efficient removal of methyl violet dye. Desalination and Water Treatment, 84 . pp. 262-270. ISSN 1944-3994

Mirsaeidi, S. and Said, D. M. and Mustafa, M. W. and Habibuddin, M. H. and Ghaffari, K. (2016) A protection strategy for micro-grids based on positive-sequence impedance. Distributed Generation and Alternative Energy Journal, 31 (3). pp. 7-32. ISSN 2156-3306

Misbah, Maznah and Muhamad, Ida Idayu and Shaharuddin, Shahrulzaman and Ab. Rasid, Atiqah (2014) Coating of mixed commercial β-mannanase and phytase through spraying on capra hircus pelleted feed. 2nd International Conference on Agricultural and Food Engineering (CAFE 2014) - New Trends Forward, 2 . pp. 102-106. ISSN 2210-7843

Misdan, Nurasyikin and Lau, W. J. and Ong, Chisiang and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2015) Study on the thin film composite poly (piperazine-amide) nanofiltration membranes made of different polymeric substrates: effect of operating conditions. Korean Journal of Chemical Engineering, 32 (4). pp. 753-760. ISSN 0256-1115

Misi, Siti Eda Eliana and Wan Omar, Wan Nor Nadyaini and Saidina Amin, Nor Aishah (2010) Heterogeneous esterification of free fatty acid to biodiesel. Journal - The Institution of Engineers, Malaysia, 71 (3). pp. 35-45. ISSN 0126-513X

Misson, Mailin (2007) The kinetic performance of locally isolated immobilized phenol degrader in repeated batch culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Misson, Mailin and Razali, Firdausi (2007) Immobilization of phenol degrader pseudomonas sp in repeated batch culture using bioceramic and sponge as support materials. Jurnal Teknologi (46F). pp. 51-59. ISSN 2180-3722

Miswan, Zulaika (2016) Physico-chemical properties of stainless steel 316L coated with ginseng-poly (lactic-co-glycolic acid) for stent application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Moawia, R. M. and Nasef, M. M. and Mohamed, N. H. (2016) Radiation grafted natural fibres functionalized with alkalised amine for transesterification of cottonseed oil to biodiesel. Jurnal Teknologi, 78 (8-3). pp. 89-93. ISSN 0127-9696

Moawia, R. M. and Nasef, M. M. and Mohamed, N. H. and Ripin, A. (2016) Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate. Radiation Physics and Chemistry, 122 . pp. 35-42. ISSN 0969-806X

Moazeni, Nima and Mohamad, Zurina and Dehbari, Nazila (2015) Effects of the processing methods on the gas permeability of PLA/Sepiolite thin films: solution casting versus thermo compression. In: Applied Mechanics and Materials, 22-26 Sept, 2015, Johor Bahru, Malaysia.

Moazeni, Nima and Mohamad, Zurina and Dehbari, Nazila (2014) Study of silane treatment on poly-lactic acid(PLA)/sepiolite nanocomposite thin films. Journal of Applied Polymer Science, 132 (6). ISSN 0021-8995

Mobaraki, Maryam (2016) Fabrication and optimization performance for treatment of ship oily water by nanocomposite membranes using Taguchi method. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Moghaddam, Alireza Layegh (2013) Biodiesel production using aminated fibrous polymer catalyst in packed continuous reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad, A. and Bahadoran, M. and Daud, S. and Chaudhary, K. T. and Aziz, M. S. and Jalil, M. A. and Ali, J. and Yupapin, P. P. (2016) Analysis of temperature sensor in all-pass microring resonator. Jurnal Teknologi, 78 (3). pp. 61-65. ISSN 0127-9696

Mohamad, Azuwa Mohamed and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd Mutalib, Muhazri and Mohamad, Abu Bakar and Mohd. Zain, Muhammad Fauzi and Awang, Nor Asikin and Mohd. Hir, Zul Adlan (2017) Physicochemical characterization of cellulose nanocrystal and nanoporous self-assembled CNC membrane derived from Ceiba pentandra. Carbohydrate Polymers, 157 . pp. 1892-1902. ISSN 0144-8617

Mohamad, M. and Ngadi, N. and Wong, S. L. and Jusoh, M. and Yahya, N. Y. (2017) Prediction of biodiesel yield during transesterification process using response surface methodology. Fuel, 190 . pp. 104-112. ISSN 0016-2361

Mohamad, Mardawani (2013) Optimal operating conditions of Eurycoma Longifolia extraction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad, Mardhiah and Ngadi, Norzita (2015) Effect of TiO2 mixed CaO catalyst in palm oil transesterification. In: Applied Mechanics and Materials, 2015.

Mohamad, Mohamed Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Rosmi, Saufi Mohamad and Mohd. Hir, Zul Adlan and Abd. Mutalib, Muhazri and Ismail, Ahmad Fauzi and Tanemura, Masaki (2017) Carbon as amorphous shell and interstitial dopant in mesoporous rutile TiO2: bio-template assisted sol-gel synthesis and photocatalytic activity. Applied Surface Science, 393 . pp. 46-59. ISSN 0169-4332

Mohamad, N. and Omar, W. and Abdullah, R. (2011) Precast lightweight foamed concrete sandwich panel (PLFP) tested under axial load: preliminary results. Advanced Materials Research, 250-25 . pp. 1153-1162. ISSN 1022-6680

Mohamad, Noor Ashikin (2017) Removal of carbon monoxide from hydrogen gas using platinum and palladium catalyst in electrochemical water gas shift reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad, Nur Royhaila Oyhaila and Huyop, Fahrul Zaman and Aboul Enein, Hassan Y. and Mahata, Naji Arafat and Abdul Waha, Roswanira (2015) Response surface methodological approach for optimizing production of geranyl propionate catalysed by carbon nanotubes nanobioconjugates. Biotechnology and Biotechnological Equipment, 29 (4). pp. 732-739. ISSN 1310-2818

Mohamad, NurRoyhaila and Buang, Nor Aziah and Mahat, Naji Arafat Rafat and Jamalis, Joazaizulfazli and Huyop, Fahrul and Aboul-Enein, Hassan Y. and Abdul Wahab, Roswanira (2015) Simple adsorption of Candida rugosa lipase onto multi-walled carbon nanotubes for sustainable production of the flavor ester geranyl propionate. Journal of Industrial and Engineering Chemistry, 32 . pp. 99-108. ISSN 1226-086X

Mohamad, Rosfarizan and Mohamed, Mohd. Shamzi and Suhaili, Nurashikin and Mohd. Salleh , Madihah and Ariff, Arbakariya (2010) Kojic acid: applications and development of fermentation process for production. Biotechnology and Molecular Biology Reviews, 5 (2). pp. 24-37. ISSN 1538-2273

Mohamad, S. N. H. and Muhamad, I. I. and Khairuddin, N. and Jusoh, Y. M. M. (2017) Stability study of α-toc/β-CD powders obtained by microwave heating and encapsulation process. Journal of Thermal Analysis and Calorimetry, 130 (3). pp. 1473-1480. ISSN 1388-6150

Mohamad, Z. and Ismail, H. and Thevy, R. Chantara (2008) Tensile properties and morphology of dynamic vulcanized ENR-5/EVA blends : different vulcanization system. Journal of Chemical and Natural Resources Engineering, 2 . pp. 91-98. ISSN 1823-5255

Mohamad, Z. and Saadan, M. Z. H. (2017) Biodegradability and tensile properties of compatibilised polyethylene/rice bran film. Chemical Engineering Transactions, 56 . pp. 919-924. ISSN 2283-9216

Mohamad, Zahari and Yahya, Wira Jazair (2012) Biofuels from an esterification of sludge palm oil as an alternative to residual oil. Advanced Materials Research, 512-5 . pp. 1858-1861. ISSN 1858-1861

Mohamad, Zurina (2011) Polyamide 6 nanocomposites toughened with dynamically vulcanized epoxidized natural rubber-50. In: Malaysia Polymer International Conference 2011 (Mpic 2011).

Mohamad, Zurina (2003) Adunan polistirena/getah stirena butadiena terisi serbuk sekam padi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Ali, Nur Syuhada' and Ali, M. and Mohd. Yusof, Khairiyah (2017) Fuzzy logic model for degumming and bleaching troubleshooting in palm oil refining. In: 16th International Conference on Control, Automation and Systems, ICCAS 2016, 2016, South Korea.

Mohamad Aziz, Siti Norazimah (2013) Characterization and optimization of mix anionic-nonionic reverse micelle system for Amoxicillin extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad Haafiz, M. K. and Hassan, A. and Abdul Khalil, H. P. S. and Hossain, M. S. (2015) Comparing the effects of microcrystalline cellulose and cellulose nanowhiskers extracted from oil palm empty fruit bunch on mechanical and thermal properties of polylactic acid composites. In: Fillers and Reinforcements for Advanced Nanocomposites. Elsevier Ltd, pp. 27-40. ISBN 978-008100082-3

Mohamad Haafiz, M. K. and Hassan, A. and Arjmandi, R. and Marliana, M. M. and Nurul Fazita, M. R. (2016) Exploring the potentials of nanocellulose whiskers derived from oil palm empty fruit bunch on the development of polylactid acid based green nanocomposites. Polymers and Polymer Composites, 24 (9). pp. 729-734. ISSN 0967-3911

Mohamad Haafiz, M. K. and Hassan, A. and Arjmandi, R. and Zakaria, Z. and Marliana, M. M. and Syakir, M. I. and Nurul Fazita, M. R. (2016) Microcrystalline cellulose from oil palm empty fruit bunches as filler in polylactic acid. Polymers and Polymer Composites, 24 (9). pp. 675-680. ISSN 0967-3911

Mohamad Ibrahim, M. N. and Marliana, M. A. (2005) Tanin Daripada Serbuk Tandan Sawit Kosong Dan Aplikasinya Dalam Industri Petroleum. Jurnal Teknologi F, 42 (F). pp. 107-120. ISSN 0127-9696

Mohamad Nor, Nor Azureen (2016) Polyvinylidene fluoride membrane coated with titanium dioxide nanofibers for photocatalytic membrane process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad Nor, Nor Azureen and Jaafar, Juhana and Ismail, Ahmad Fauzi and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. and Wan Salleh, Wan Norharyati and Yusof, Norhaniza and Lau, Woei Jye (2015) Rapid systhesis of graphene nanosheets and its structural properties study for direct methanol fuel cell. In: The 4th ICIBA 2015, International Conference on Information Technology and Business Applications, 20-21 Feb, 2015, Indonesia.

Mohamad Samuri, Sazalina (2005) Optimisation of operating parameters for the removal of ethanol from Zingiber officinale Roscoe (ginger) oleoresin using short-path distillation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamad Shukery, Mohamad Firdza (2017) Optimal synthesis of oil palm eco-industrial town. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Mohamad Shukery, Mohamad Firdza and Hashim, Haslenda and Lim, Jengshiun (2015) Superstructure-based synthesis and optimization of oil palm eco-industrial town: case study in Iskandar Malaysia. Clean Technologies and Environmental Policy, 18 (7). pp. 2119-2129. ISSN 1618-954X

Mohamad Yusof, Mohamad Sukri (2017) Carbon supported palladium-platinum catalyst for oxygen reduction reaction in high temperature proton exchange membrane fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohamed, F. and Hasbullah, H. and Jami'An, W. N. R. and Salleh, W. N. H. W. and Ibrahim, N. and Ali, R. R. (2016) Effect of coagulant bath on the gas permeation properties of cellulose acetate asymmetric membrane. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Mohamed, Fadilah (2017) Formic acid crosslinked cellulose acetate defect-free asymmetric membrane for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohamed, M. A. and Jaafar, J. and Ismail, A. F. and Othman, M. H. D. and Rahman, M. A. (2017) Fourier transform infrared (FTIR) spectroscopy. In: Membrane Characterization. Elsevier Inc., pp. 3-29. ISBN 978-044463776-5

Mohamed, M. A. and Salleh, W. N. W. and Jaafar, J. and Mohd. Hir, Z. A. and Rosmi, M. S. and Abd. Mutalib, M. and Ismail, A. F. and Tanemura, M. (2016) Regenerated cellulose membrane as bio-template for in-situ growth of visible-light driven C-modified mesoporous titania. Carbohydrate Polymers, 146 . pp. 166-173. ISSN 0144-8617

Mohamed, M. A. and Wan Salleh, W. N. and Jaafar, J. and Rosmi, M. S. and Mohd. Hir, Z. A. and Abd. Mutalib, M. and Ismail, A. F. and Tanemura, M. (2017) Carbon as amorphous shell and interstitial dopant in mesoporous rutile TiO2: Bio-template assisted sol-gel synthesis and photocatalytic activity. Applied Surface Science, 393 . pp. 46-59. ISSN 0169-4332

Mohamed, M. H. and Othman, M. H. D. and Abd. Mutalib, M. and Rahman, M. and Jaafar, J. and Ismail, A. F. and Mohamed Dzahir, M. I. H. (2016) Structural control of NiO–YSZ/LSCF–YSZ dual-layer hollow fiber membrane for potential syngas production. International Journal of Applied Ceramic Technology, 13 (5). pp. 799-809. ISSN 1546-542X

Mohamed, Mohamad Azuwa (2015) Titanium dioxide nanorods in regenerated cellulose membrane for photocatalytic degradation of phenol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohamed, Mohamad Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi (2015) Regenerated cellulose/N-Doped TI0 2y/ nanocomposite thin film fabricated from recycled newspaper as a green photocatalytic membrane. In: 28th Symposium of Malaysian Chemical Engineers 2015, 21-22 Oct, 2015, Selangor, Malaysia.

Mohamed, Mohamad Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi (2015) Structural characterization of N-doped anatase-rutile mixed phase TiO2 nanorods assembled microspheres synthesized by simple sol-gel method. Journal of Sol-Gel Science and Technology, 74 (2). pp. 513-520. ISSN 0928-0707

Mohamed, Mohamad Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd. Mutalib, Muhazri and Abdullah Sani, Nur Aimie and M. Asri, S.E.A. and Ong, Chi Siang (2016) Physicochemical characteristic of regenerated cellulose/N-doped TiO2 nanocomposite membrane fabricated from recycled newspaper with photocatalytic activity under UV and visible light irradiation. Chemical Engineering Journal, 284 . pp. 202-215. ISSN 1385-8947

Mohamed, Mohamad Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd. Mutalib, Muhazri and Jamil, Siti Munira (2015) Incorporation of N-doped TiO2 nanorods in regenerated cellulose thin films fabricated from recycled newspaper as a green portable photocatalyst. Carbohydrate Polymers, 133 . pp. 429-437. ISSN 0144-8617

Mohamed, Musliha (2013) Mechanical and flammability properties of hybrid recycled newspaper/sepiolite polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed, N. B. and Ngadi, N. and Lani, N. S. and Rahman, R. A. (2017) Polyethylenimine modified sugarcane bagasse adsorbent for methyl orange dye removal. Chemical Engineering Transactions, 56 . pp. 103-108. ISSN 2283-9216

Mohamed, Nurul Azlina (2005) Study on important parameters affecting the hydro-distillation for ginger oil production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed Amin, Mohamed Afizal (2012) Development of sulfonation poly ether ether ketone membrane for microbial fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Elbashir, Nimir Osman (1998) The effect of design parameters on the solvent extraction performance for recycling of used oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Esivan, Siti Marsilawati (2012) Prediction of lactic acid concentration using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Esivan, Siti Marsilawati and Rashid, Roslina and Zaharudin, Nor Athirah and Nik Mahmood, Nik Azmi (2015) Growth and survival of lactobacillus casei in rice bran and banana peel medium. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Mohamed Ghengesh, Mohamed Ghengesh (2011) Treatment of traces of oil from electroplating industry wastewater by using membrane bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed Kamar, Haslinda and Kamsah, Nazri and Md. Tap, Masine and Mohd. Salimin, Khairul Amry (2012) Assessment of thermal comfort in a naturally ventilated residential terrace house. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 247-254. ISSN 0094-243X

Mohamed Mahmoud, Nasef and Saidi, Hamdani and Mohd. Nor, Hussin and M. Dahlan, Khairul Zaman and Kamaruddin, Hashim (1999) Cation exchange membranes by radiation-induced graft copolymerization of styrene onto PFA copolymer films. I. preparation and characterization of the graft copolymer. Journal of Applied Polymer Science, 73 . pp. 2095-2102.

Mohamed Noah, Norul Fatiha (2015) Emulsion liquid membrane extraction of palladium from simulated electroplating wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Noor, Norhayati (2013) Solid lipid particles for improved dermal delivery of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Noor, Norhayati and Abd. Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan (2013) The effect of virgin coconut oil loaded solid lipid particles (VCO-SLPs) on skin hydration and skin elasticity. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 39-43. ISSN 0127-9696

Mohamed Rashid, Norhana and Kishi, Naoki and Soga, Tetsuo (2016) Effects of nanostructures on iron oxide based dye sensitized solar cells fabricated on iron foils. Materials Research Bulletin, 77 . pp. 126-130. ISSN 0025-5408

Mohamed Razak, Siti Fatimah and Ngadi, Norzita (2014) Synthesis and characterization of hybrid flocculant kenaf based. Applied Mechanics and Materials, 625 . pp. 213-216. ISSN 1660-9336

Mohamed Tap, Fatahiya (2013) Simulation of folding pathway studies of TRP-cage miniprotein, Amyloid A4 peptide and α-conotoxin RgIa peptide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Thari, Mohamad Amirul Nizam (2014) Transmission line magnetic field minimization via particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Yusof, Nor Ashikin (2013) Malaysia as biotechnology producer: characters of local biotechnology industry. Global Journal for Research Analysis, 2 (9). pp. 8-9. ISSN 2277-8160

Mohammad, N. N. B. and Arsad, A. and Sani, N. S. A. and Basri, M. H. (2017) Effect of compatibilisers on thermal and morphological properties of polylactic acid/natural rubber blends. Chemical Engineering Transactions, 56 . pp. 1027-1032. ISSN 2283-9216

Mohammad, Nor Nisa Balqis and Arsad, Agus and Rahmat, Abdul Razak and Abdullah Sani, Nur Syazana and Ali Mohsin, Mohammed Ehtesham (2016) Influence of compatibilizer on the structure properties of polylactic acid/natural rubber blends. Polymer Science Series A, 58 (2). pp. 177-185. ISSN 0965-545X

Mohammad, Norhafizah and Hanapi, Siti Zulaiha and Abd. Malek, Roslinda and Velayutham, Sasidharan and Syed Mohamed, Syed Yassin and Lim, Pek Boon and Mohd. Aris, Alijah and Othman, NorZalina and Aziz, Ramlan and El Enshasy, Hesham (2014) Optimization of growth medium and procesing condition of acinetobacter sp as biological phosphorus removal for wastewater treatment in semi-industrial scale bioreactor. In: 5th International Conference on Biotechnology for the Wellness Industry (ICBWI), 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Mohammad, Norhasmira (2018) Automated detection of aortic annulus sizing based on decision level fusion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohammad Azmin, Siti Nuurul Huda and Mustaffa, Azizul Azri and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Lee, Suan Chua (2014) Solubility parameter prediction for kacip fatimah herb using group contribution-based models. Computer Aided Chemical Engineering, 33 . pp. 1225-1230. ISSN 1570-7946

Mohammad Azmin, Siti Nuurul Huda and Yunus, Nor Alafiza and Mustaffa, Azizul Azri and Wan Alwi, Sharifah Rafidah and Lee, Suan Chua (2015) Computer-aided approach for designing solvents blend for herbal phytochemical extraction. In: 12th International Symposium on Process Systems Engineering & 25th European Symposium of Computer Aided Process Engineering (PSE-2015/ESCAPE-25), 31 May - 4 June, 2015, Denmark.

Mohammad Azmin, Siti NuurulHuda and Yunus, Nor Alafiza and Mustaffa, Azizul Azri and Wan Alwi, Sharifah Rafidah and Lee, Suan Chua (2015) A framework for solvent selection based on herbal extraction process design. Journal of Engineering Science and Technology, 10 . pp. 25-34. ISSN 1823-4690

Mohammad Fauzi, Ahmad Hafiidz and Saidina Amin, Nor Aishah and Mat, Ramli (2014) Esterification of oleic acid to biodiesel using magnetic ionic liquid: multi-objective optimization and kinetic study. Applied Energy, 114 . pp. 809-818. ISSN 0306-2619

Mohammad Fauzi, Ahmad Hafiidz and Saidina Amin, Nor Aishah (2012) An overview of ionic liquids as solvents in biodiesel synthesis. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5770-5786. ISSN 1364-0321

Mohammad Inuwa, Ibrahim and Hassan, Azman and Samsudin, S. A. and Mohamad Kassim, Mohamad Haafiz and Jawaid, Mohammad and Majeed, Khaliq and Abdul Razak, N. C. (2014) Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites. Journal of Applied Polymer Science, 131 (15). ISSN 1097-4628

Mohammad Rozali, N. E. and Wan Alwi, S. R. and Ho, W. S. and Manan, Z. A. and Klemes, J. J. (2016) Integration of diesel plant into a hybrid power system using power pinch analysis. Applied Thermal Engineering, 105 . pp. 792-798. ISSN 1359-4311

Mohammad Rozali, N. E. and Wan Alwi, S. R. and Ho, W. S. and Manan, Z. A. and Klemes, J. J. and Mustapha, N. N. and Rosli, M. H. (2017) A new framework for cost-effective design of Hybrid Power Systems. Journal of Cleaner Production, 166 . pp. 806-815. ISSN 0959-6526

Mohammad Rozali, Nor Erniza and Ong, Su Tin and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2014) Electricity load reduction in hybrid power systems using power pinch analysis. Computer Aided Chemical Engineering, 33 . pp. 1495-1500. ISSN 1570-7946

Mohammad Rozali, Nor Erniza and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and KlemeÅ¡, JiÅí Jaromír and Hassan, Mohammad Yusri (2015) A process integration approach for design of hybrid power systems with energy storage. Clean Technologies and Environmental Policy, 17 (7). pp. 2055-2072. ISSN 1618-954X

Mohammad Rozali, Nor Erniza and Wan Alwi, Sharifah Rafidah and Wai, Shin Ho and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2015) Expansion of a diesel plant into a hybrid power system using power pinch analysis. Chemical Engineering Transactions, 45 . pp. 343-348. ISSN 2283-9216

Mohammad Sabli, Noor Salehan and Zainon Noor, Zainura and Kanniah, Kasturi Devi and Kamaruddin, Siti Nurhayati and Mohamed Rusli, Nurfarhain (2017) Developing a methodology for water footprint of palm oil based on a methodological review. Journal of Cleaner Production, 146 . pp. 173-180. ISSN 0959-6526

Mohammad Zainol, Muzakkir and Mohammed Yussuf, Mohd. Asmadi and Saidina Amin, Nor Aishah (2015) Impregnation of magnetic particles on oil palm shell activated carbon for removal of heavy metal ions from aqueous solution. Jurnal Teknologi, 72 (1). pp. 7-11. ISSN 2180-3722

Mohammadi Ashnani, Mohammad Hossein (2016) A decision support system for sustainable development of biodiesel industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammadi Ashnani, Mohammad Hossein and Miremadi, Tahere and Johari, Anwar and Danekar, Afshin (2015) Environmental impact of alternative fuels and vehicle technologies: a life cycle assessment perspective. In: Procedia Environmental Science/ International Conference on Environmental Forensics 2015 (IENFORCE2015), 2015.

Mohammadian, Erfan (2010) Ultrasonic assisted water flooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohammadian, Erfan and Motamedi, Shervin and Shamshirband, Shahaboddin and Hashim, Roslan and Junin, Radzuan and Roy, Chandrabhushan and Azdarpour, Amin (2016) Application of extreme learning machine for prediction of aqueous solubility of carbon dioxide. Environmental Earth Sciences, 75 (3). pp. 1-11.

Mohammed, Jibril and Nasri, Noor .S. and Ahmad Zaini, Muhammad Abbas and Hamza, Usman D. and M. Zain, Husna and Ani, Farid Nasir (2016) Optimization of microwave irradiated - coconut shell activated carbon using response surface methodology for adsorption of benzene and toluene. Desalination and Water Treatment, 57 (17). pp. 7881-7897. ISSN 1944-3994

Mohammed, Jibril and Nasri, Noor Shawal and Zaini, Muhammad Abbas Ahmad and Hamza, Usman Dadum and Ani, Farid Nasir (2015) Adsorption of benzene and toluene onto KOH activated coconut shell based carbon treated with NH3. International Biodeterioration & Biodegradation, 102 . pp. 245-255. ISSN 9608-5241

Mohammed, Y. H. and Sakrani, S. B. and Rohani, M. S. (2016) Pressure dependent tailored attributes of silicon nanoneedles grown by VHF plasma technique. Superlattices and Microstructures, 94 . pp. 147-157. ISSN 0749-6036

Mohammed Danlami, Jibrin and Arshad, Agus and Ahmad Zaini, Muhammad Abbas and Mohammed Evuti, Abdullahi and Ogbole, Ankeli (2014) Coagulation-flocculation in water treatment using calotropis procera leaves: a case study of river in Kaduna, Nigeria. Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 5-9. ISSN 2180-3722

Mohammed Merdhah, Amer Badr (2008) The study of scale formation in oil reservoir during water injection at high - barium and high - salinity formation water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering .

Mohamud, Mohamed Ali and Abd. Malek, Roslinda and Othman, Nor Zalina and Ramli, Solleh and Jalal, Y. and Aziz, Ramlan and El-Enshasy, Hesham Ali Metwally (2014) Production of erythromycin antibiotic by saccharoplyspora erythraea fermentation in shake flasks and bioreactor. In: 5th International Conference on Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Kuala Lumpur, Malaysia.

Mohd, M. G. and Othman, N. and Sadikin, A. N. and Khalid, S. S. and Yusof, N. (2008) Development of empty fruit bunch filter with addition of chitosan for pre-treament of palm oil mill effluent. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 8-16. ISSN 1823-5255

Mohd Dom, Zanariah (2003) Enzymatic transesterification of palm olein and lauric acid in stirred batch reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd Ibrahim, Shazana (2009) Chemical precipitation of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd Marsin, A. and Muhamad, I. I. (2016) Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film. Jurnal Teknologi, 78 (6). pp. 163-168. ISSN 0127-9696

Mohd Nawawi, Mohd Ghazali and Sadikin, Aziatul Niza and Tan, Gi Gi (2008) Pervaporation of ethanol-water using chitosan-clay composite membrane. Jurnal Teknologi, F (49). pp. 179-188. ISSN 0127-9696

Mohd Nawi, W. N. R. and Wan Alwi, S. R. and Manan, Z. A. and Klemeš, J. J. (2016) A systematic technique for cost-effective CO2 emission reduction in process plants. Clean Technologies and Environmental Policy, 18 (6). pp. 1769-1777. ISSN 1618-954X

Mohd Tabi, Amal Nafissa and Ahmad Zakil, Fathie and Mohd Fauzai, Wan Nur Fauzan and Ali, Noorhalieza and Hassan, Onn (2008) The usage of empty fruit bunch (EFB) and palm pressed fibre (PPF) as substrates for the cultivation of pleurotus ostreatus. Jurnal Teknologi, F (49). pp. 189-196. ISSN 0127-9696

Mohd Yusof, Abdul Halim and Mathias, Ulbricht (2006) Effects of photo-initiation and monomer composition onto performance of graft-copolymer based membrane adsorbers. Desalination, 200 (1-3). pp. 462-463. ISSN 0011-9164

Mohd-Norddin, M. N. A and Ismail, Ahmad Fauzi and Matsuura, Takeshi and D., Rana (2008) Charged surface modifying macromolecules in polymer electrolyte membrane. Jurnal Teknologi, 49F . pp. 91-102. ISSN 0127-9696

Mohd., S. M. and Wan, R. W. S. and Abdul, R. I. and Mohd., Z. J. and Issham, I. (2016) Wettability alteration of dolomite rock using nanofluids for enhanced oil recovery. In: 4th International Conference on Nano and Materials Engineering, ICNME 2016, 7-8 April 2016, Bali Island, Indonesia.

Mohd. Ali, Ozair and Chu, K. L. and Wang, C. W. (2006) Neutral lipid profile of sago worm, the larva of weevil rynchophorus ferrugineus. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd. Amin, Nor Amaiza (2015) Accelerated aqueous extraction and phytochemicals screening of eurycoma longifolia (Tongkat Ali) extract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Aris, Aslizah (2008) Optimization of microbial fuel cell using locally isolated electerochemical - active bacterial strains. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Aris, Maizatul Asnie and Chelliapan, Shreeshivadasan and Mohd., Mohd. Fadhil and Anwar, Aznah Nor and Shahperi, Rafidah and Selvam, Sivathass Bannir (2016) Effect of effluent circulation and hydraulic retention time (HRT) on the performance of a modified anaerobic baffled reactor (MABR) during start-up period. Desalination and Water Treatment, 57 (40). pp. 18597-18605. ISSN 1944-3994

Mohd. Arshad, Azmi and Kamaluddin, Noor Hazirah (2007) Carbon dioxide flooding in offshore Sarawak. In: Improved Oil Recovery. Penerbit UTM , Johor, pp. 61-78. ISBN 978-983-52-0594-1

Mohd. Arshad, Azmi and Othman, Ariff and Abdul Razak, Mohd. Razif and Abu Bakar, Mohamad (1993) Aliran dua fasa di bahagian mendatar telaga. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-7.

Mohd. Azizi, C. Y. and Ismail, N. A. (2008) Optimization of removing of free fatty acid content on Jatropha curcas l. seed oil using experimental design. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 36-48. ISSN 1823-5255

Mohd. Azizi, C. Y. and Morad, Noor Azian and Harun, M. Y. and Ismail, Mohd Hasmadi (2015) Simulation of palm oil expression in screw press using computational fluid dynamics. In: 10th Asian Control Conference (ASCC 2015), 31 May-3 Jun, 2015, Sabah, Malaysia.

Mohd. Azli, Alyaa Amalina (2013) Removal of heavy metals from crude oils using complexing agents and ionic liquids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Daud, N. S. and Abang Zaidel, D. N. and Kok Song, L. and Muhamad, I. I. and Mohd Jusoh, Y. M. (2016) Antioxidant properties of rice bran oil from different varieties extracted by solvent extraction methods. Jurnal Teknologi, 78 (6-12). pp. 107-110. ISSN 0127-9696

Mohd. Daud, Nurul Shafinas and Abang Zaidel, Dayang Norulfairuz and Lai, Kok Song and Muhamad, Ida Idayu and Mohd. Jusoh, Yanti Maslina (2015) Antioxidant properties of rice bran oil from different varieties extracted by solvent extraction methods. In: 1st International Conference on Innovation in Science and Technology 2015, 20 April, 2015, Kuala Lumpur, Malaysia.

Mohd. Din, Abd. Rahman Jabir and Cheng, Kian Kai and Sarmidi, Mohamad Roji (2017) Assessment of compost extract on yield and phytochemical contents of pak choi (Brassica rapa cv. Chinensis) grown under different fertilizer strategies. Communications in Soil Science and Plant Analysis, 48 (3). pp. 274-284. ISSN 0010-3624

Mohd. Din, Abd. Rahman Jabir and Supari, Nurhaziqah and Hanapi, Sti Zulaiha and Zainul Alam, Siti Atiqah and Javed, Mohammad Arshad and Lee, Chew Tin and Sarmidi, Mohamad Roji (2014) Influence of microbial inoculation on seedling vigor and enzyme activities of Malaysian upland rice. In: 5th International Conference on the Biotechnology for the Wellness Industry, 10-11 Jun, 2014, Johor Bahru, Malaysia.

Mohd. Fadzal, Mohd. Fadzli (2007) Application of effective microorganisms technology on management and meat quality of japanese quail. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Mohd. Faizal, Hasan and M. Nazri, M. Shafiq and Rahman, Md. Mizanur and Syahrullail, S. and Abdul Latiff, Zulkarnain (2016) Development of palm biomass briquettes with polyethylene plastic waste addition. Jurnal Teknologi, 78 (9-2). pp. 69-75. ISSN 0127-9696

Mohd. Fauzi, Noor Akhmazillah and Sarmidi, Mohamad Roji (2010) Storage stability of a-tocopherol extracted from heated and unheated palm oil mesocarp. Journal of Science and Technology, 2 (1). pp. 111-120. ISSN 2229-8460

Mohd. Fauzi , Noor Akhmazillah and Sarmidiba, Mohamad Roji (2010) Extraction of heat treated palm oil and their stability on ß-carotene during storage. Journal of Science and Technology, 2 (1). pp. 45-54. ISSN 2229-8460

Mohd. Ghazali, N. and Ghazali, A. D. and Ali, I. S. and Rahman, M. A. A. (2012) Geometry effects on cooling in a standing wave cylindrical thermoacousic resonator. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011, 3-4, Oct 2011, Melaka, Malaysia.

Mohd. Hadzr, Hafizah and Che Yunus, Mohd. Azizi and Zhari, Salman and Rithwan, Fahim (2014) The effects of solvents and extraction methods on the antioxidant activity of P. niruri. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 47-52. ISSN 2180-3722

Mohd. Hanafi@Hanafiah, Mohd. Mukrish (2012) The photoprotective and collagen stimulatory effects of labisia pumila var pumila extract on UVB irradiated human skin fibroblast (HSF1184) cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Hanim, Khairilanuar (2014) Recovery of carotenoids from crude palm oil using organic solvent nanofiltration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Idrus, Nor'ashiqin and Sarmin, Nor Haniza and Mat Hassim, Hazzirah Izzati and Masri, Rohaidah (2014) On the abelianization of a torsion free crystallographic group. Jurnal Teknologi (Sciences and Engineering), 70 (1). pp. 81-84. ISSN 0127-9696

Mohd. Ismail, Nur Suriani (2007) Optimization Of Ethanol Production In Yeast Fermentation Process Based On Mixing Time. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Mohd. Ismail, Nur Suriani (2011) Synthesis of magnetic alginate beads based on maghemite nanopracticles for removal Pb(II) in aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Ismail, Nurul Izzati (2015) Anti-microbial and anti-inflammatory activities of crude and acidified fraction of selected Malaysian honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Jaafar, Mohammad Nazri and Eldrainy, Yehia A. and Asril, Muhammad Hanafi (2011) Experimental investigation of spray characteristics of refined bleached and deodorized palm oil and diesel blends using phase doppler particle alyzer. International Journal of Physical Sciences, 6 (29). pp. 6674-6680. ISSN 1992-1950

Mohd. Jusoh, Y. M. (2008) Effects of baking temperature and time on open bread properties. Journal of Chemical & Natural Resources Engineering, 2 . pp. 21-30. ISSN 1823-5255

Mohd. Kamil, Nurul'Ain (2009) Synthesis and characterization of cellulose acetate from kenaf fiber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Kasim, Nur Afiqah (2017) Life cycle assessment on electricity generation from palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Kassim, A. S. and Aripin, A. M. and Ishak, N. and Zainulabidin, M. H. and Abang Zaidel, D. N. F. (2016) Oil palm leaf fibre and its suitability for paper-based products. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7364-7369. ISSN 1819-6608

Mohd. Khairuddin, Nur Farahah and Idris, Ani and Ahmed, Iqbal and Mohd. Yusof, Noordin (2014) Influence of multiwall carbon nanotube on polyethersulfone/ polyvinyl alcohol blend membranes. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 31-35. ISSN 0127-9696

Mohd. Marsin, Aishah and Muhamad, Ida Idayu (2016) Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film. Jurnal Teknologi, 78 (6). pp. 163-168. ISSN 21803722

Mohd. Marsin, Aishah and Muhamad, Ida Idayu (2016) Preparation and characterization of purple sweet potato starch-based edible film with optimized mixing temperature. Journal of Advanced Research in Materials Science, 16 (1). pp. 1-10. ISSN 2289-7992

Mohd. Mokhtar, Mutahharah (2016) Establishment of emission characteristics, emission factors and health risk assessment from a coal-fired power plant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Mokhtar, Nadzirah and Lau, Woei Jye and Goh, Pei Sean (2013) Effect of hydrophobicity degree on PVDF hollow fiber membranes for textile wastewater treatment using direct contact membrane distillation. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 77-81. ISSN 0127-9696

Mohd. Mustapha, Norasyikin (2013) Synthesis of tungsten carbide from waste date palm tree carbon by mechanical alloying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Muzi, Syahirah and Mohd. Yusof, Mohd. Rashid and Jamian, Nor Ruwaida (2015) Total particulate, pm10 and pm2.5 emission from palm oil mill boiler. In: The First International Conference on Innovation in Science and Technology, 20 Apr, 2015, Kuala Lumpur, Malaysia.

Mohd. Najib, Siti Balqis (2017) Separation of carbon dioxide using emulsion liquid membrane containing methyldiethanolamine and 2-amino-2-methyl-1-propanol siti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohd. Nasir, H. and Md. Salleh, L. and Ismail, A. R. and Machmudah, S. (2017) Solubility correlation of gall (Quercus infectoria) extract in supercritical CO2 using semi-empirical equations. Asia-Pacific Journal of Chemical Engineering, 12 (5). pp. 790-797. ISSN 1932-2135

Mohd. Nasir, Hasmida and Md. Salleh, Liza and Che Yunus, Mohd. Azizi (2014) Effect of supercritical carbon dioxide flow rate on extraction yield, antioxidant properties and morphological changes of Quercus infectoria galls. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 35-38. ISSN 0127-9696

Mohd. Nasir, Nashrul Fazli and Ying, Yang and Che Ahmad, Azlan and Kadri, Nahrizul Adib (2006) Application of sol gel technique for glucose oxidase immobilization in biosensor application. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd. Nasir, Nur Haziqah and Ahmad Zaini, Muhammad Abbas and Mohd. Setapar, Siti Hamidah and Hassan, Hashim (2015) Removal of methylene blue and copper (ii) by oil palm empty fruit bunch sorbents. Jurnal Teknologi, 74 (7). pp. 107-110. ISSN 0127-9696

Mohd. Nasir,, Hasmida (2017) Bioactivities and fitting models of Quercus infectoria galls extracts using supercritical carbon dioxide. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Mohd. Nawawi, M. G. and Othman, N. and Sadikin, A. N. and Khalid, S. S. and Yusof, N. (2008) Development of empty fruit bunch filter with addition of chitosan for pre-treatment of palm oil mill effluent. Journal of Chemical and Natural Resources Engineering, 2 . pp. 8-16. ISSN 1823-5255

Mohd. Nawawi, Mohd. Ghazali and Hassan, Hashim (2003) Pervaporation separation of isopropanol-water mixtures using crosslinked chitosan membranes. Jurnal Teknologi Siri Khas A (39A). pp. 55-64. ISSN 0127-9696

Mohd. Nawawi, Mohd. Ghazali and Zamrud, Zafifah (2014) Composite chitosan membranes for the separation of methanol/methyl tert-butyl ether mixtures. Jurnal Teknologi (Sciences and Engineering), 67 (2). pp. 23-30. ISSN 0127-9696

Mohd. Nawi, Norazlina (2012) Encapsulation of anthocyanins from Ipomoea Batatas using microwave drying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Nawi, W. N. R. and Wan Alwi, S. R. and Manan, Z. A. and Kleme\x9A, J. J. (2016) Pinch Analysis targeting for CO2 Total Site planning. Clean Technologies and Environmental Policy, 18 (7). pp. 2227-2240. ISSN 1618-954X

Mohd. Nawi, Wan Norlinda Roshana and Wan Alwi, Sharifah Rafidah and Abd Manan, Zainuddin and Jiri, Jaromir Klemes (2016) A systematic technique for cost-effective CO2 emission reduction in process plants. Clean Technologies and Environmental Policy, 18 (6). pp. 1769-1777. ISSN 1618-954X

Mohd. Nawi, Wan Norlinda Roshana and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Jirí, Jaromír Klemeš (2015) A new algebraic pinch analysis tool for optimising CO2capture, utilisation and storage. Chemical Engineering Transactions, 45 . pp. 265-270. ISSN 2283-9216

Mohd. Nazri, Noor Aina (2015) Development of polyacrylonitrile/polyacrylonitrile-g-poly(vinyl alcohol) hollow fiber ultrafiltration membranes with enhanced anti-fouling properties. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohd. Nazri, Noor Aina and Lau, Woei Jye and Ismail, Ahmad Fauzi and Saidin, Mohammad Abdul Razis (2013) Improved performance of PAN-based UF membrane with PAN-G-PVA amphiphilic copolymer. Jurnal Teknologi (Sciences and Engineering), 65 (4). pp. 73-76. ISSN 0127-9696

Mohd. Nazri, Noor Aina and Lau, Woei Jye and Ismail, Ahmad Fauzi and Veerasamy, Devaraj (2015) Improved permeation properties of polyacrylonitrile-based ultrafiltration membranes incorporated with poly(vinyl alcohol). Desalination and Water Treatment, 55 (7). pp. 1771-1785. ISSN 1944-3994

Mohd. Nazri, Noor Aina and Woei, Jye Lau and Ismail, Ahmad Fauzi (2015) Improving water permeability and anti-fouling property of polyacrylonitrile-based hollow fiber ultrafiltration membranes by surface modification with polyacrylonitrile-g-poly(vinyl alcohol) graft copolymer. Korean Journal of Chemical Engineering, 32 (9). pp. 1853-1863. ISSN 0256-1115

Mohd. Noor, Nur Diana (2011) Synthesis of polyethersulfone ultrafiltration membranes with sodium bromide as additives by microwave irradiation technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Nor, Shadiah Husna and Ahmad, Arshad (2016) A framework for risk-based assessment using loss functions. In: Conference on Emerging Energy and Process Technology, 07-8 Dec, 2016, Port Dickson, Negeri Sembilan, Malaysia.

Mohd. Norddin, M. N. A. and Ismail, A. F. (2007) Preparation and characterization of blending sulfonated poly(ether ether ketone) with charged surface modifying macromolecules. Journal of Applied Membrane Science & Technology, 5 . pp. 1-10. ISSN 1823–366X

Mohd. Norddin, M. N. A. and Ismail, Ahmad Fauzi and Rana, D. and Matsuura, T. and Mustafa, A. and Tabe-Mohammadi, A. (2008) Characterization and performance of proton exchange membranes for direct methanol fuel cell: Blending of sulfonated poly(ether ether ketone) with charged surface modifying macromolecule. Journal of Membrane Science, 323 . pp. 404-413. ISSN 0376-7388

Mohd. Norddin, Muhammad Noorul Anam and Rana, D. and Ismail, Ahmad Fauzi and Matsuura, T. and Sudirman, R. and Jaafar, J. (2012) Study on synthesis and physical properties of charged surface modifying macromolecules with different end-capping materials for membrane applications. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2016-2023. ISSN 1226-086X

Mohd. Norddin, Muhd. Noorul Anam and Ismail, Ahmad Fauzi (2008) Blending speek with charge surface modifying macromolecule : a new technique to enhance polymer electrolyte performance. In: Sulfonated Poly(ether ether ketone): Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, 87 - 104. ISBN n/a

Mohd. Norddin, Muhd. Noorul Anam and Jaafar, Juhana and Ismail, Ahmad Fauzi (2008) CSMM blended speek membrane : effect on polyols. In: Sulfonated Poly(ether ether ketone) : Material for Polymer Electrolyte Membrane. Penerbit UTM , Johor, pp. 105-122. ISBN n/a

Mohd. Ran, Nur Hidayah (2011) Synthesis and characterization of a ball-like material of polystyrene-coated titania with floating property. In: Regional Annual Fundamental Science Symposium (RAFSS 2011).

Mohd. Rosnan, Rizuan (2012) Rheological, mechanical, morphological and thermal properties ofr ecycled poly (ethylene terephthalate)- polythylene filled montmorillonite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Sa'at, Jasmi (2012) Parameter setting through optimization of variable cooling channels which effect to the injection moulding product quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Said, Nassya (2007) Stability study of meat tenderizer powder. In: PSM Presentation (Bioprocess Engineering Dept). (Unpublished)

Mohd. Sakri, Norhaslina (2009) Blended chitosan and poly (vinyl alcohol) membranes for the prevaporation of methanol and methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Sakri, Norhaslina (2009) Blended chitosan and poly(vinyl alcohol) membranes for the pervaporation of methanol and methyl tert-butyl ether. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Salleh, Faezah and Ramos-Madrigal, Jazmin and Penaloza, Fernando and Liu, Shanlin and Sinding, Mikkel-Holger S. and Patel, Riddhi P. and Martins, Renata and Lenz, Dorina and Fickel, Joerns and Roos, Christian and Shamsir, Mohd. Shahir and Azman, Mohammad Shahfiz and Lim, Burton K. and Rossiter, Stephen J. and Wilting, Andreas and Gilbert, M. Thomas P. (2017) An expanded mammal mitogenome dataset from Southeast Asia. Gigascience, 6 (8). pp. 1-19. ISSN 2047-217X

Mohd. Sani, Atikah and Sarmin, Nor Haniza and Adam, Nooraishikin and Amzee Zamri, Siti Norziahidayu (2013) The analysis of crystallographic symmetry types in finite groups. In: 3rd International Conference on Mathematical Sciences, ICMS 2013, 17-19 Dec, 2015, Kuala Lumpur, Malaysia.

Mohd. Sani, Noor Faezah (2013) Synthesis and characterization of biodegradable poly (xylitol sebacate dodecanoate) nano-hydroxyapatiten composites for potential used in biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Setapar, Siti Hamidah and Shiew, Wei Lau and Toorisaka, Eiichi and Goto, Masahiro and Furusaki, Shintaro and Mat, Hanapi (2008) Reverse micelle extraction of antibiotics. Jurnal Teknologi F (49F). pp. 69-79. ISSN 0127-9696

Mohd. Setapar, Siti Hamidah and Wakeman, R. J. and Tarleton, E. S. (2008) Penicillin G solubilisation into AOT reserve micelles. Chemical Engineering Research and Design, 87 (6). pp. 833-842. ISSN 0263-8762

Mohd. Setapar, S. H. and Wakeman, R. J. and Tarleton, E. S. (2009) Penicillin G solubilisation into AOT reverse micelles. Chemical Engineering Research and Design, 87 (6). pp. 833-842. ISSN 02638762

Mohd. Setapar, Siti Hamidah and Abd. Talib, Norfahana and Khamis, Aidee Kamal (2014) The benefits and limitations of methods development in solid phase extraction: mini review. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 69-72. ISSN 0127-9696

Mohd. Setapar, Siti Hamidah and Lau, S. W. and Yong, C. and Chen, P. L. and Shanjingm, Y. and Mat, Hanapi (2008) Partitioning behaviour of selected antibiotics in organic solvents. Journal of Chemical and Natural Resources Engineering, 2 (Specia). pp. 100-112. ISSN 1823-5255

Mohd. Setapar, Siti Hamidah (2004) Anionic reverse micelle liquid-liquid extraction of penicillin G. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Setapar, Siti Hamidah (2011) Extraction of biomolecules by biosurfactant-reverse micelles. In: International Conference On Chemical And Process Engineering (ICCPE 2011).

Mohd. Sharif, N. and Md. Yusoff, Nelidya and Ahmad, Fauzan and Harun, S. W. and Ahmad, H. (2015) Investigation of nitrogen doped graphene as saturable absorber in Thulium-Doped Fiber Laser. In: 1st International Conference on Telematics and Future Generation Networks, TAFGEN 2015, 26-28 May, 2015, Kuala Lumpur, Malaysia.

Mohd. Shukri, Nurasmat and Wan Abu Bakar, Wan Azelee and Jaafar, Jafariah and Abdul Majid, Zaiton (2015) Removal of naphthenic acids from high acidity Korean crude oil utilizing catalytic deacidification method. Journal of Industrial and Engineering Chemistry, 28 . pp. 110-116. ISSN 1226-086X

Mohd. Sirat, Hasnah (2015) Isolation, identification and chemical modification of sesquiterpenes from Curcuma xanthorrhiza. In: 5th International Conference for Young Chemists 2015 Green Chemistry Towards a Sustainable Tomorrow, 5-7 Aug, 2015, Pulau Pinang, Malaysia.

Mohd. Sokri, Mohd. Nazri and Onishi, Takahiro and Daiko, Yusuke and Honda, Sawao and Iwamoto, Yuji (2015) Hydrophobicity of amorphous silica-based inorganic-organic hybrid materials derived from perhydropolysilazane chemically modified with alcohols. Microporous and Mesoporous Materials, 215 . pp. 183-190. ISSN 1387-1811

Mohd. Sueb, Mohd. Shafiq (2012) Efficient cultivation of Kluyveromyces Lactics in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Tahir, Norhayati and Yeow, Nicholas Jee Sing (2006) Adsorption of metsulfuron-methyl on soils under oil palm plantation: a case study. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd. Tajuddin, Ramlah and Ismail, Ahmad Fauzi and Salim, Mohd. Razman (2004) Effects of oxygen concentration on microbial growth in aerated palm oil mill effluent using oxygen enriched air membrane system. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Mohd. Tajuddin, Ramlah and Ismail, Ahmad Fauzi and Salim, Mohd. Razman (2004) A Study On The Performance And Morphology Of Multicomponents Hollow Fiber Ultrafiltration Membrane. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

Mohd. Yunus, Khairul Nizam (2004) Penggunaan kaca buangan sebagai agregat halus dalam turapan asfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yunus, Mohd. Yusri (2002) Development of an advisory system using modified hazop approach on a fatty acid fractionation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Yunus, Nor Zurairahetty and Dariusz, Wanatowski and L., R. Stace (2013) Lime stabilisation of organic clay and the effects of humic acid content. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 44 (1). pp. 19-25. ISSN 0046-5828

Mohd. Yusof, Abdul Halim and Ulbricht, Mathias (2007) Polypropylene-based membrane adsorbers via photo-initiated graft copolymerization: optimizing separation performance by preparation conditions. Journal of Membrane Science, 311 (1-2). pp. 294-305. ISSN 0376-7388

Mohd. Yusof, Khairiyah and Idris, Ani (2008) Utilization of stacked neural network for pore size prediction of asymmetric membrane. Jurnal Teknologi (49F). pp. 251-260. ISSN 0127-9696

Mohd. Yusof, Khairiyah and Karray, Fakhri and Douglas, Peter L. (2003) Development of neural network models for a crude oil distillation column. Jurnal Teknologi F (38F). pp. 53-64. ISSN 0127-9696

Mohd. Yusof, A. H. and Ulbricht, Mathias (2008) Variation of weak cation-exchange polymer layers grafted on hydrophobic microfiltration membrane for protein separation. Journal of Chemical & Natural Resources Engineering, 2 . pp. 53-59. ISSN 1823-5255

Mohd. Yusof, Ab. Aziz (2013) The effect of geometry on the micromechanical behaviour of campaniform sensillum biomimetic structure as strain sensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Yusof, Abdul Halim (2008) Porous polypropylene membranes with grafted cation-exchange polymer layers for protein separation. In: Special Topics In Bioprocess Engineering. Penerbit UTM , Johor, 163 - 180. ISBN 978-983-52-0602-9

Mohd. Yusof, Abdul Halim and Ulbricht, Mathias (2006) Entrapping method surface modification for preparation of membrane adsorber. In: 1st International Conference on Natural Resources Engineering & Technology 2006, 24-25th July 2006, Putrajaya, Malaysia.

Mohd. Yusof, Khairiyah (2002) Connectionist models of a crude oil distillation column for real time optimisation. In: Regional Symposium on Chemical Engineering 2002, Songkla, Thailand, 2002, Thailand.

Mohd. Yusof, Khairiyah and Hassim, Mimi Haryani and Tan, Sook Li and Ab. Rashid, Siti Rafidah (2004) Formulation of model predictive control algorithm for nonlinear processes. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Yusof, Khairiyah and Idris, Ani and Lim, J. S. (2003) Pore size determination of asymmetric membrane using neural network. In: International Conference on Chemical & Bioprocess Engineering, 27-29 August 2003, Kota Kinabalu.

Mohd. Yusof, Khairiyah and Idris, Ani and Lim, Jet Siong and Wong, Hun Mun and Morad, Noor Azian (2003) Artificial neural network modelling of steady state chemical engineering systems. In: Malaysia-Japan Seminar on Artificial Intelligence Applications in Industry, 24-25 June 2003, Kuala Lumpur.

Mohd. Yusof, Raihana (2009) Flame retardancy and mechanical properties of maleated HDPE compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Yusof, Mohd. Rashid (1986) The application of x-ray fluorescence spectrometry for multielemental analysis of air particulate samples. Buletin Kimia, 1 (2). pp. 76-90.

Mohd. Yusoff, Mohd. Rashid (1987) Comparison of TSP measurements by two hi-vol samplers located side by side. Journal of Environmental Science & Technology for Balanced Development . (Submitted)

Mohd. Yusoff, Mohd. Rashid (1987) Determination of total suspended particulate with and without the use of control filters. Journal of Environmental Science & Technology for Balanced Development . pp. 1-4. (Submitted)

Mohd. Yusoff, Mohd. Rashid and I., Salmah and R. S., Ahmad (1990) Kesan suhu terhadap kandungan lembapan dan asid lemak bebas isirong kelapa sawit. Pertanika . pp. 1-12.

Mohd. Yusoff, Mohd. Rashid and Wood, Abdul Khalik and Shafii, Azman Firdaus (1987) Elemental composition of palm-oil mill boiler flyash. Journal of Environmental Science & Technology for Balanced Development . pp. 1-11. (Submitted)

Mohd. Yusoff, Mohd. Rashid and Ahamad, Rahmalan and Wood, Abdul Khalik (1997) Characterization of atmospheric fine and coarse aerosols on Kuala Lumpur. Pertanika Journal of Science & Technology, 5 (1). pp. 25-42. ISSN 0128-7680

Mohd. Yusoff, Mohd. Rashid and Mohd. Harun, Mohd. Harun (1989) Morfologi abu terbang dari emisi dandang kilang kelapa sawit. Morfologi Abu Terbang . (Unpublished)

Mohd. Yusoff, Mohd. Rashid and Mohd. Harun, Mohd. Harun (1988) Scanning electron microscope study of fine and coarse airborne particle in Kuala Lumpur. In: First Particulate Technology Conference '88 Kuala Lumpur, 7-9 September, 1988, Kuala lumpur.

Mohd. Yusoff, Noor Izyan Syazana (2013) Mechanical and thermal properties of poly(methyl methacrylate)-grafted-oil palm empty fruit bunch/talc hybrid filled poly(vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohd. Yusoff, Noor Izyan Syazana (2013) Mechanical and thermal properties of poly(methylmethacrylate)-grafted-oil palm empty fruit bunch /talc hybrid filled poly (vinyl chloride) compsites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Yusoff, Mohd. Rashid (1987) Air pollution control legislation - Research needs. Conference on Environmental Legislation . pp. 1-7.

Mohd. Yusoff, Mohd. Rashid (1987) An investigation of PM10 concentrations at one site of Kuala Lumpur. Symposium of Malaysian Chemical Engineers . pp. 1-16.

Mohd. Yusoff, Mohd. Rashid (1987) Komposisi aerosol halus dan kasar di chicago dengan pendafluor sinar-X. Simposium Kimia Analisis . pp. 1-12.

Mohd. Yusoff, Mohd. Rashid (1990) Rekabentuk asas di dalam program pengawalan kualiti udara. Alam Sekitar, 11 (1). pp. 9-11.

Mohd. Yusoff, Mohd. Rashid and Abdul Aziz, Ramlan and Shafil, Azman Firdaus (1987) Particle size characteristics of a palm oil mill boiler flyash. In: Seminar on : Modern Method of Particle Characterization, 19 November 1987.

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Jaafar, Jaafariah and Wood, Abd. Khalik (1988) Kepekatan unsur logam berat di dalam debu jalan bandaraya Kuala Lumpur. In: Simposium Kimia Analisis Kebangsaan Ke Dua Universiti Sains Malaysia, September, 1988, Universiti Sains Malaysia.

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Wood, Abdul Khalik (1987) Background air particulate chemistry in Kuala Lumpur. Malaysia Chemical Congress .

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Wood, Abdul Khalik (1986) Elemental composition of total suspended particulate matter in Kuala Lumpur - A preliminary survey. Simposium Kedua Jurutera Kimia Malaysia . pp. 1-16.

Mohd. Yusoff, Mohd. Rashid and Ahmad, Rahmalan and Wood, Abdul Khalik (1988) Nilai C1/Br dan Halida/pb di dalam minyak petrol tempatan. Jurnal Teknologi . pp. 1-8.

Mohd. Yusoff, Mohd. Rashid and Allen Scheff, Peter (1987) Identification of sources of aerosol in Chicago by chemical element mass balance. XVI Pacific Science Congress . pp. 1-15.

Mohd. Yusoff, Mohd. Rashid and Scheff, Peter Allan (1987) Determination of sources of aerosol in Chicago by chemical element mass balance. Chemical Element . pp. 1-16.

Mohd. Yusoff, Mohd. Rashid and Shafil, Azman Firdaus and Wood, Abdul Khalik (1987) Unsur logam berat : emisi dari kilang kelapa sawit. Buletin Kimia .

Mohd. Yusoff, Mohd. Rashid and Wood, Abdul Khalik and Shaffi, Azman Firdaus (1987) Multielemental analysis of an industrial source emission by nuetron activation analysis : A case study of a palm-oil mill plant. A Case Study Of A Palm-Oil Mill Plant . pp. 1-10.

Mohd. Zaidi, Nur Hazwani Fatihah (2017) Numerical investigation on flame propagation and pressure development in vented explosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Zain, Husna (2017) Gases breakthrough adsorption on activated carbon of porous synthesized renewable material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Zamberi, Mahanum and Hassan, S. N. H. and Ani, Farid Nasir (2015) Optimization of biodiesel production from transesterification of waste cooking oils using alkaline catalysts. In: Applied Mechanics And Materials, 2015.

Mohd. Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing azo acid orange 7 by electricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zin, Rohani (2009) Process modelling of degumming and bleaching in palm oil refining using artifical neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd.Sam, Abdul Rahman and Gholami, Mehran and Mohamad Yatim, Jamaludin and Abu Hassan, Shukur (2015) Performance of steel-carbon fibre reinforced polymer plate bonding system under various environments conditions. In: 9th Asia Pacific Structural Engineering and Construction Conference (Apsec2015) & 8th Asean Civil Engineering Conference (Acec2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Wan Mohamad Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Mat, Hanapi (2016) Effect of synthesis conditions on physical properties, laccase catalytic activity and stability of sol–gel laccase. Journal of Sol-Gel Science and Technology, 80 (3). pp. 587-597. ISSN 0928-0707

Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Wan Mohd Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Mat, Hanapi (2016) Effect of synthesis conditions on physical properties, laccase catalytic activity and stability of sol-gel laccase. Journal of Sol-Gel Science and Technology, 80 (3). pp. 587-597. ISSN 0928-0707

Mohidin, Khairunnisa (2014) Tailor-made biofuel-diesel blends properties validation and engine performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohsin, R. and Abd. Majid, Z. (2008) Water condensation in low pressure steam turbine : a nucleation theory - Part 1. Journal of Chemical & Natural Resources Engineering, 2 . pp. 40-49. ISSN 1823-5255

Mohsin, R. and Abd. Majid, Z. (2008) Water condensation in low pressure steam turbine : a nucleation theory - Part II. Journal of Chemical & Natural Resources Engineering, 2 . pp. 50-63. ISSN 1823-5255

Mohsin, R. and Nasri, N. S. and Kefly, F. (2008) Structural analysis of NGVM pressure regulator via FEA. Journal of Chemical and Natural Resources Engineering, 2 . pp. 46-58. ISSN 1823-5255

Mohsin, R. and Yaacob, Z. and Y., Chang (2008) Review of mixture formation unit for CNG motorcycle. Journal of Chemical and Natural Resources Engineering, 2 . pp. 1-7. ISSN 1823-5255

Mohsin, M. E. A. and Elias, M. and Arsad, A. and Yong, K. C. and Alothman, O. and Zakaria, Z. Y. (2017) Electrical conductivity, thermal, rheological and morphological Characteristics of Grafted Blend of Polypyrole and Polypropylene. Chemical Engineering Transactions, 56 . pp. 1375-1380. ISSN 2283-9216

Mohsin, R. and Abd. Majid, Z. and Nasri, N. S. and Kiat, L. K. (2008) Pressure drop performance in gas custody transfer through domestic gas meter operations. Journal of Chemical & Natural Resources Engineering, 2 . pp. 20-27. ISSN 1823-5255

Mohsin, R. and Kumar, T. and Abd. Majid, Z. and Kumar, I. and Wash, A. M. (2017) Assessment of usage of biofuel in aviation industry in Malaysia. Chemical Engineering Transactions, 56 . pp. 277-282. ISSN 2283-9216

Mohsin, R. and Kumar, T. and Abd. Majid, Z. and Nasria, N. S. and Sharer, Z. and Kumar, I. and Wash, A. M. (2017) Assessment of biofuels in aviation industry for environmental sustainability. Chemical Engineering Transactions, 56 . pp. 1189-1194. ISSN 2283-9216

Mohsin, R. and Abd. Majid, Z. and Nasri, N. S. and Kiat, L. K. (2008) Overall performance of domestic gas meter operations. Journal of Chemical & Natural Resources Engineering, 2 . pp. 77-90. ISSN 1823-5255

Mohsin, Rahmat and Yaacob, Zulkifli and Abdul Majid, Zulkefli and Ashraf, Shameed (2009) Bi-fuel NGVM engine emission results based on non-loaded system operation. Journal of Chemical and Natural Resources Engineering, 4 (1). pp. 22-33. ISSN 1823-5255

Mohtar, Mohd Ajib and Kumaresan, Sivakumar and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2007) Modelling and optimisation of Eurycoma longifolia extraction utilising a recirculating flow extractor. Journal of Applied Sciences, 7 (15). pp. 2168-2173. ISSN 1812-5654

Mohtar, A. and Ho, W. S. and Hashim, H. and Lim, J. S. and Muis, Z. A. and Liew, P. Y. (2017) Palm oil mill effluent (pome) biogas off-site utilization Malaysia specification and legislation. Chemical Engineering Transactions, 56 . pp. 637-642. ISSN 2283-9216

Mohtar, Aminullah and Wai, Shin Ho and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Peng, Yen Liew (2016) Palm oil mill effluent (POME) biogas off-site utilization Malaysia specification and legislation. In: 2nd International Conference of Low Carbon Asia (ICLCA2016), 23 Nov, 2016.

Mohtar, S. S. and Tengku Malim Busu, T. N. Z. and Bustam, A. A. and Abdul Mutalib, M. I. and Mat, H. B. (2011) Conversion of oil palm biomass into high value-added products-a review. In: Regional Annual Fundamental Science Symposium (Rafss 2011).

Mohtar, S. S. and Tengku Malim Busu, T. N. Z. and Md. Noor, A. M. and Shaari, N. and Mat, H. (2017) An ionic liquid treatment and fractionation of cellulose, hemicellulose and lignin from oil palm empty fruit bunch. Carbohydrate Polymers, 166 . pp. 291-299. ISSN 0144-8617

Mohtar, S. S. and Tengku Malim Busu, T. N. Z. and Md. Noor, A. M. and Shaari, N. and Yusoff, N. A. and Che Yunus, M. A. and Mat, H. (2017) Optimization of coag-flocculation processes of a newly synthesized quaternized oil palm empty fruit bunch cellulose by response surface methodology toward drinking water treatment process application. Clean Technologies and Environmental Policy, 19 (1). pp. 191-204. ISSN 1618-954X

Mohtar, Safia Syazana (2016) Synthesis and characterization of empty fruit bunch cellulose-based coag-flocculant in removing turbidity for water treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohtar, Samia S. and Tengku Malim Busu, T. N. Z. and Md. Noor, A. M. and Shaari, Nursyamimi Latif A. and Yusoff, Norazila A. and Bustam Khalil, M. A. and Abdul Mutalib, Mohamed Ibrahim and Mat, Hanapi (2015) Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes. Bioresource Technology, 192 . pp. 212-218. ISSN 0960-8524

Mohtor, N. H. and Othman, M. H. D. and Ismail, A. F. and Rahman, M. A. and Jaafar, J. and Hashim, N. A. (2017) Investigation on the effect of sintering temperature on kaolin hollow fibre membrane for dye filtration. Environmental Science and Pollution Research, 24 (19). pp. 15905-15917. ISSN 0944-1344

Mohtor, Nur Hamizah and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Rahman, Mukhlis A. and Jaafar, Juhana and Abdulhameed, Mohammed Abdulmunem (2017) Investigation on the effect of sintering temperature on kaolin hollow fibre membrane for water application. Jurnal Teknologi, 79 (1-2). pp. 47-51. ISSN 01279696

Mojaveryazdi, Farzaneh Sabbagh (2017) Modified acrylamide hydrogel nanocomposites for varginal drug delivery system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Mojaveryazdi, Farzaneh Sabbagh and Muhamad, Ida Idayu and Rezania, Shahabaldin and Benham, Hiro (2014) Importance of glucose and pseudomonas in producing degradable plastics. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 7-10. ISSN 0127-9696

Mokhtar, M. M. and Taib, M. R. and Hassim, M. H. (2016) Decision analysis of multi-pollutant control strategy for coal-fired power plant in Malaysia.