Items where Subject is "T Technology > T Technology (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 3264.

A

Abd. Rahman, Nurul H. and Yamada, Y. and Amin Nordin, M. S. (2018) Reliability of strip line method for determination of conductivity for lossy conductive materials. IEEE Access, 6 (850204). pp. 64630-64638. ISSN 2169-3536

Al-Qaim, Fouad Fadhil and Haider Mussa, Zainab and Yuzir, Ali (2018) Development and validation of a comprehensive solid-phase extraction method followed by LC-TOF/MS for the analysis of eighteen pharmaceuticals in influent and effluent of sewage treatment plants. Analytical and Bioanalytical Chemistry, 410 (20). pp. 4829-4846. ISSN 1618-2642

Abdullah, Mohd. Faizol and Hashim, Abdul Manaf (2018) Design of optimum rear passivated submicron Al corrugation in very thin textured silicon back-contact back-junction solar cell for absorption enhancement up to near-infrared region. Journal of Photonics for Energy, 8 (1). 0145011-0145011. ISSN 1947-7988

A. H., Syafrina and A., Norzaida and O., Noor Shazwani (2018) Stochastic generation of hourly rainfall series in the Western Region of Peninsular Malaysis. International Journal of Advanced and Applied Sciences, 5 (1). pp. 101-108. ISSN 2313-626X

A. H. M., Din and K., Omar (2009) Derivation of sea level anomaly using satellite altimeter. In: Proceeding of 2009 East Asia Hydrographic Symposium & Exhibition (EAHSE), 2009, The Legend Hotel, Kuala Lumpur.

A. Jalani, Jihan and Kidam, Kamarizan and Shahlan, Siti Suhaili and Kamarden, Hamidah and Hassan, Onn and Hashim, Haslenda (2015) An analysis of major accident in the US chemical safety board (CSB) database. Jurnal Teknologi, 75 (6). pp. 53-60. ISSN 2180–3722

A. Jalil @ Zainuddin, Siti Zura and Mohamad Hairani, Izwan Hamidi and Md. Yusoff, Nelidya (2018) Reduce musculoskeletal disorders injury during manual handling in tooling parts manufacturing industry. Journal of Advanced Research in Occupational Safety and Health, 1 (1). pp. 1-10. ISSN 2637-0255

A. K., Khairuldean and T., Chiong Ing and Che Kob, Mohd. Salman and Budianto, Aries and Sumintono, Bambang and Tawi, Kamarul Baharin and Samion, Syahrullail (2012) Extreme pressure properties investigation of palm olein using four ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 920-927. ISBN 978-073541032-9

A. Kadir, Abd. Majid and Ses, Shahrum and Desa, Ghazali and Omar, Kamaludin and Omar, Abdullah Hisam and Chen, Kah Eng and Wong, Yeak Kuan (2001) Current trend in geoinformation technology. In: Studies Toward the Development of Implementation Plan of Coordinated Cadastral System For Malaysia. (Unpublished)

A. Kadir, Zuritah and Mohammad, Roslina and Othman, Norazli (2020) An advanced risk matrix analysis approach for safety evaluation at major ports in Malaysia. Journal of Advanced Research in Business and Management Studies, 18 (1). pp. 31-41. ISSN 2462-1935

A. Kadir, Abd. Majid and Desa, Ghazali (2003) Land administration for land surveyors. Documentation. Fakulti Kejuruteraan Sains Dan Geoinformasi, Fakulti Kejuruteraan Sains Dan Geoinformasi.

A. Kamaludeen, Rahma and Sulaiman, Shahida and Cheah, Yu-N (2011) Expert-based decision support framework for software reengineering. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

A. M., Mimi Sakinah and Ismail, Ahmad Fauzi and Md. Illias, Rosli and Hassan, Osman (2005) Determination of fouling mechanisms in enzymatic membrane reactor (EMR) for cyclodextrins production based on Resistance-In Series Model. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

A. M., Mimi Sakinah and Ismail, Ahmad Fauzi and Md. Illias, Rosli and Hassan, Osman (2005) Development of enzymatic membrane reactor (EMR) for cyclodextrins production. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

A. Majid, Huda and A. Rahim, Mohamad Kamal and Masri, Thelaha (2009) Microstrip antenna's gain enhancement using left-handed matematerial structure. Progress in Electromagnetics Research M, 8 . pp. 235-247. ISSN 1937-8726

A. Majid, Nabihah and M. Juperi, Norfarain and Jasmi, Kamarul Azmi (2018) Tamadun Melayu Islam dan Pencapaian Teknologi. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

A. Majid, Siti Nuruljannah and Musa, Tajul Ariffin and Setan, Halim and Musliman, Ivin Amri (2008) Network analysis for GPS UTMnav system: preliminary stage. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

A. Malek, Nur Shuhada and Zayid, Syamil and Ahmad, Zaifulasraf and Ya'acob, Suraya and Abu Bakar, Azaliah (2020) Data understanding for flash flood prediction in urban areas. Journal of Environmental Treatment Techniques, 8 (2). pp. 770-778. ISSN 2309-1185

A. Manan, Zainuddin and Muis, Zarina (2005) Use of mundane analogies as an effective tool for teaching and learning. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

A. Manan, Muhammad and Abd. Razak, Abd. Razif and Sulai, Abdul Thani (1993) Bahan baki berlilin sulfur rendah (LSWR) minyak Tapis Blend di Loji Penapisan Kerteh. Buletin FKKKSA, 7(2) . pp. 12-18. ISSN 0128-0740

A. Rahim, Mohamad Kamal and D. Bala, Bashir and Murad, N. A and Ismail, M. F. and Majid, H. A. (2012) Design and analysis of metamaterial antenna using triangular resonator. In: 2012 Asia-Pacific Microwave Conference (APMC 2012), 4-7 Dec 2012, Ambassador Hotel Kaohsiung Kaohsiung, Taiwan.

A. Rahman, Mohd. Asamudin and Wan Hussin, Wan Norazam and Mohd., Mohd. Hairil and Harun, Fatimah Noor and Lee, Kee Quen and Jeom, Kee Paik (2019) Modified wake oscillator model for vortex-induced motion prediction of low aspect ratio structures. Ships and Offshore Structures, 14 (sup1). pp. 335-343. ISSN 1744-5302

A. Rasid, Zainudin and Hassan, Mohamad Zaki and Yahaya, Hafizal and Mahmud, Jamaluddin and Yusof, Zarina (2018) Dynamic instability response of smart composite material. In: 4th International Conference on Mechanical, Manufacturing and Plant Engineering.

A. Razak, Affiz Syam (2012) Preloading and prefabricated vertical drain technique for soft ground improvement in soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Rosli, Nur Fathin and Ibrahim, Roslina and Yahya, Yazriwati and M. Zainuddin, Norziha M. and Yaacob, Suraya and M. Yusoff, Rasimah C. (2020) Consumers intention to use mobile payment: a case of quick response (QR) code applications. Mathematical Sciences and Informatics Journal, 1 (1). pp. 20-34. ISSN 2735-0703

A. Samah, Azurah and Wah, Lau Kee and Desa, Muhammad Ishak and Abdul Majid, Hairudin and Mohd. Azmi, Nurulhuda Firdaus and Salleh, Nordin and Abu Bakar, Azilina and Manual, Adilius (2014) Decision support system using system dynamics simulation modelling for projection of dentist supply. In: 2014 International Conference on Computer Assisted System in Health (CASH 2014), 19-21 Dec, 2014, Putrajaya, Malaysia.

Aarabi, Majid (2013) An extended framework for implementing of enterprise resource planning for small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab. Ghani, Hadhrami and Abd. Aziz, Azlan and Azizan, Azizul and Mohd. Daud, Salwani (2018) Adaptive interference mitigation with user grouping for fast transmission in cellular networks. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 704-712. ISSN 2502-4752

Ab. Halim, M. H. and Nor Anuar, A. and Ujang, Z. and Bob, M. M. (2015) Aerobic granulation for real domestic sewage treatment at hot and low humidity climate condition. In: The 2nd IWA Malaysia Young Water Professionals Conference 2015 (YWP15), 17-20 March, 2015, Kuala Lumpur, Malaysia.

Ab. Hamid, Salbiah and Abd. Rahman, Nurul Huda and Yamada, Yoshihide and Hung, Phan Van and Quoc, Dinh Nguyen (2020) Multibeam characteristics of a negative refractive index shaped lens. Sensors (Switzerland), 20 (19). pp. 1-17. ISSN 1424-8220

Ab. Rahman, Rosdi (2002) Mengubahsuai pam omboh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab. Rani, N. I. and Ismail, S. and Mohamed, Z. and Hussain, A. H. and Ghafourian, K. (2018) Local contractors' awareness on competitiveness towards liberalisation and globalisation in the Malaysian construction industry. Journal of Construction in Developing Countries, 23 (1). pp. 21-42. ISSN 1823-6499

Ab. Rashid, M. Z. and Mohd. Yakub, M. F. and Zaki, S. A. and Mamat, N. and Syed Mohd. Putra, S. M. and Roslan, S. A. (2020) Modeling of the in-pipe inspection robot: a comprehensive review. Ocean Engineering, 203 . ISSN 0029-8018

Ab. Rasid, Kamaruzaman and Ahmad, Anuar and Mohd. Ariff, Shahidah (1993) Ilmu ukur untuk jurutera. UTM Skudai, Johor.

Ab. Rasid, Nurul 'Ain (2011) Simulation and analysis of maximum power point tracking (MPPT) algorithms for PV applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ab. Talib, Mohamed Syazwan and Abdul Hamid, Abu Bakar and Zulfakar, Mohd. Hafiz (2015) Halal supply chain critical success factors: a literature review. Journal of Islamic Marketing, 6 (1). pp. 44-71. ISSN 1759-0833

Abadi, Satria and Huda, Miftachul and Mat Teh, Kamarul Shukri and Haron, Zulkiflee and Ripin, Mohd. Nasir and Hehsan, Aminudin and Sarip, Shamsul and Hehsan, Muhamad Rafiqi and Amrullah, Musfika and Maseleno, Andino (2018) Hazard level of vehicle smoke by fuzzy multiple attribute decision making with simple additive weighting method. International Journal of Pharmaceutical Research, 10 (4). pp. 58-67. ISSN 0975-2366

Abaei, Golnoush and Selamat, Ali (2015) Increasing the accuracy of software fault prediction using majority ranking fuzzy clustering. Studies in Computational Intelligence, 569 . pp. 179-193. ISSN 1860-949X

Abaei, Golnoush and Selamat, Ali and Fujita, Hamido (2015) An empirical study based on semi-supervised hybrid self-organizing map for software fault prediction. Knowledge-Based Systems, 74 . pp. 28-39. ISSN 9506-764

Abas, Hafiza and Azizan, Azizul and Mohd. Daud, Salwani and Salih Yagoub, Fathi Ibrahim (2018) Enhancement of physical security control for data centre and perimeter in banking: a case study of central bank of Sudan (CBOS). Open International Journal of Informatics (OIJI), 6 (3). pp. 67-84. ISSN 2289-2370

Abas, Hafiza and Zakaria, Huraizah and Yahya, Faridah Hanim and Lob Yussof, Rahmah and Ramli, Roslinda (2018) A systematic literature review of security perimeter in hospital facility. Open International Journal of Informatics (OIJI), 6 (4). pp. 104-129. ISSN 2289-2370

Abas, M. A. and Wan Salim, W. S. and Ismail, M. I. and Rajoo, S. and Martinez-Botas, R. (2017) Fuel consumption evaluation of SI engine using start-stop technology. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 2967-2978. ISSN 2289-4659

Abas, N. and Ishak, R. and Syed Abd Rahman, S. A. and Bani, N. A. and Md. Sarkan, H. and Mad Kaidi, H. and Haron, H. @ N. (2019) Integrating and enhancing mathematical knowledge in Jelebu secondary schools. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur, Malaysia.

Abas Azmi, Nur Rashidah (2012) Wireless access network using radio over fiber technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abbas, Malik R. and Ahmad, Baharin and Abbas, Talib Rashid (2015) Use MODIS satellite data to study new phenomena of underground fire in the Al Ruhban oasis in Al Najaf city, Iraq. Environmental Earth Sciences, 73 (7). pp. 3475-3485. ISSN 1866-6280

Abbas Ahmed, Hana Hassan (2012) Dispersive liquid-liquid microextraction methods for the determination of Triazine herbicides in aqueous samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abbas Shah, Syed Nadeem and Shahabuddin, Syed and Mohd. Sabri, Mohd. Faizul and Mohd. Salleh, Mohd. Faiz and Ali, Mohamad Azlin and Hayat, Nasir and Che Sidik, Nor Azwadi and Samykano, Mahendran and Saidur, R. (2020) Experimental investigation on stability, thermal conductivity and rheological properties of rGO/ethylene glycol based nanofluids. International Journal of Heat and Mass Transfer, 150 . p. 118981. ISSN 0017-9310

Abbasi, A. and Nasef, M. M. and Yahya, W. Z. N. and Moniruzzaman, M. and Ghumman, A. S. M. (2021) Preparation and characterization of sulfur-vinylbenzyl chloride polymer under optimized reaction conditions using inverse vulcanization. European Polymer Journal, 183 . ISSN 0014-3057

Abbasi, F. and Mehdipour-Ataei, S. and Tabatabaei-Yazdi, Z. and Babanzadeh, S. and Abouzari-Lotf, E. (2017) Effect of sepiolite nanoparticles on the properties of novel poly(sulfone ether imide). Polymers for Advanced Technologies, 28 (3). pp. 404-410. ISSN 1042-7147

Abbood, Nabeel Kadhim (2010) A software for simultaneous targeting and design of a maximum heat recovery network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd Hamid, Abu Bakar and Mohd. Taib, Mohd. Zafrullah and Abdul Razak, A. H. N. and Embi, Mohamed Rashid (2018) The barriers and causes of building information modelling usage for interior design industry. In: 1st International Conference on Architecture and Civil Engineering, ICACE 2017, 8 May 2017 through 9 May 2017, Armada Hotel Petaling Jaya, Malaysia.

Abd Manaf, Siti Norliza (2004) Faktor yang telah mendorong graduan dan Alumni Universiti Teknologi Malaysia Menceburi bidang keusahawanan Teknologi. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Abd Rahman, Mohd Norani (1989) Sumber ekonomi daripada sampah. Buletin FKKKSA, 3 (2). pp. 55-59. ISSN 0128-0740

Abd Rahman, Muhammad Zulkarnain and Dinand, Alkema (2007) Digital Surface Model (DSM) Construction and Flood Hazard Simulation for Development Plans in Naga City, Philippines. GIS development .

Abd Rahman, Mohd Khirulerwan (2010) Performance evaluation measures for adaboost algorithms in face detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Samad, Azman and Ayob, Zahidah (2012) In vitro propagation and flavonoid contents in local justicia gendarussa Burm. F. In: 11th International Annual Symposium on Sustainability Science and Management (UMTAS 2012), Kuala Terengganu, Terengganu, Malaysia, 9-11 Jul 2012.

Abd. Wahid, M. A. and Megat Mohd. Noor, M. J. and Goto, M. and Sugiura, N. and Othman, N. and Zakaria, Z. and Ahmad Mohammed, T. and Jusoh, A. and Hara, H. (2017) Recombinant protein expression of Moringa oleifera lectin in methylotrophic yeast as active coagulant for sustainable high turbid water treatment. Bioscience, Biotechnology and Biochemistry, 81 (8). pp. 1642-1649. ISSN 0916-8451

Abd Wahid, Latiffah (2004) Tahap Pemahaman Individu Terhadap Sistem Taksir Sendiri Dan Implikasinya Terhadap Individu Dan Organisasi. (Unpublished)

Abd. Aziz, Mustafa Kamal and Abu Hasan, Arshad and Khalid, Yahya and Tahir, Jamil and Sani, Harun and Jaafar, Rusli and Abu Hasan, Adilah and Mohd Yassin, Abu Azam (1993) Design and scale up of vacuum distillation process for the acidification of crude palm oil. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-1.

Abd. Aziz, Mustafa Kamal and Abu Hasan, Arshad and Khalid, Yahya and Tahir, Jamil and Sani, Harun and Jaafar, Rusli and Abu Hasan, Adilah and Mohd Yassin, Abu Azam and Mat Yusop, Mohd Izani (1993) Ketegangan permukaan campuran minyak kelapa sawit (RBDL) dan asid lemak bebas (FFA). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 3-5.

Abd. Aziz, Nur Syazarin Natasha and Mohd. Daud, Salwani and Dziyauddin, Rudzidatul Akmam and Adam, Mohamad Zulkefli and Azizan, Azizul (2020) A review on computer vision technology for monitoring poultry farm-application, hardware, and software. IEEE Access, 9 . pp. 12431-12445. ISSN 21693536

Abd. Aziz, Nur Syazarin Natasha and Mohd. Daud, Salwani and Dziyauddin, Rudzidatul Akmam and Adam, Mohamad Zulkefli and Azizan, Azizul (2021) A review on computer vision technology for monitoring poultry farm—application, hardware, and software. IEEE Access, 9 . pp. 12431-12445. ISSN 2169-3536

Abd. Fatah, A. Y. and Mazlan, S. A. and Koga, T. and Zamzuri, H. and Imaduddin, F. (2016) Design of magnetorheological valve using serpentine flux path method. International Journal of Applied Electromagnetics and Mechanics, 50 (1). pp. 29-44. ISSN 1383-5416

Abd. Hamid, Mohd. Azhar and Suratman, Azmi Shah and Othman, Muhamad Fauzi (2001) Senario Pendidikan Moral Masyarakat Melayu Zaman Teknologi Komunikasi Maklumat (ICT): Trend, Hala Tuju Dan Model Pendidikan Moral Keluarga Islam. Jurnal Teknologi E (35E). pp. 45-70. ISSN 0127-9696

Abd. Jamil, A. H. and Fathi, M. S. (2020) Enhancing bim-based information interoperability: disputes resolution from legal and contractual perspectives. Journal of Construction Engineering and Management, 146 (7).

Abd. Jamil, Ahmad Huzaimi and Fathi, Mohamad Syazli (2018) Contractual challenges for BIM-based construction projects: a systematic review. Built Environment Project and Asset Management, 8 (4). pp. 372-385. ISSN 2044-124X

Abd. Kadir, Zulkiffli and Hudha, Khisbullah and Zamzuri, Hairi and Mazlan, Saiful Amri and Murrad, Muhamad and Imaduddin, Fitrian (2016) Modeling, validation and firing-onthe- move control of armored vehicles using active front-wheel steering. Journal of Defense Modeling and Simulation, 13 (2). pp. 253-267. ISSN 1548-5129

Abd. Kadir, Zulkiffli and Zamzuri, Hairi and Hudha, Khisbullah and Mazlan, Saiful Amri and Amer, Noor Hafizah and Murrad, Muhamad (2016) Optimisation of yaw rejection control for armoured vehicle using Taguchi method. International Journal of Heavy Vehicle Systems, 23 (1). pp. 60-80. ISSN 1744-232X

Abd. Khalid, Harith Fadzilah and Azri, Nor Suhaibah and Abdul Rahman, Alias (2008) Geo-DBMS : data management of 3D spatial objects. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abd. Khalid, Harith Fadzilah and Azri, Nor Suhaibah and Abdul Rahman, Alias (2008) Managing 3D spatial objects. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 15-28. ISBN 978-983-52-0584-3

Abd. Khalid, Saiful Nizam and Mustafa, Mohd. Wazir and Khairuddin, Azhar and Abdullah, Shahrum Shah (2009) Real power transfer allocation method with the application of radial basis function network. International Review of Automatic Control, 2 (3). pp. 300-308. ISSN 1974-6059

Abd. Latif, Anizan (2006) Faktor-faktor pemindahan latihan teknologi maklumat dan hubungannya dengan kemahiran teknologi maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Latif, Fazilah (1992) Penghasilan hirudin dari lintah tempatan (hirudo medicinalis). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . I-7.

Abd. Rahim, N. and Mohamed, Z. and Amrin, A. and Masrom, M. (2021) Impact of self-regulated learning on entrepreneurial opportunity recognition and academic entrepreneurship performance. International Journal of Innovation and Technology Management, 18 (4). ISSN 0219-8770

Abd. Rahim, N. and Mohamed, Z. and Amrin, A. and Mohammad, R. (2019) Women's dual roles and career growth: a preliminary study of malaysian female talents in science, engineering and technology (SET). In: 2nd International Conference on Women in Science, Engineering and Technology, 17-19 July 2018, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Abd. Rahim, Noorlizawati and Mohamed, Zainai B. and Amrin, Astuty (2015) Commercialization of emerging technology: The role of academic entrepreneur. 6th Indonesia International Conference on Innovation, Entrepreneurship, and Small Business (IICIES 2014), 169 . pp. 53-60. ISSN 1877-0428

Abd. Rahim, Siti Hajar (2015) Formulation of a new filter aids material for fabric filtration system. Masters thesis, Malaysia-Japan International Institute of Technology.

Abd. Rahman, A. S. and Masrom, S. and Rahman, R. A. and Ibrahim, R. (2021) Rapid software framework for the implementation of machine learning classification models. International Journal of Emerging Technology and Advanced Engineering, 11 (8). ISSN 2250-2459

Abd. Rahman, Abdul Hadi and Zamzuri, Hairi and Mazlan, Saiful Amri and Abdul Rahman, Mohd. Azizi and Yamamoto, Yoshio and Samsuri, Saiful Bahri (2015) Dynamic track management in MHT for pedestrian tracking using laser range finder. Mathematical Problems In Engineering, 2015 . pp. 1-9. ISSN 1024-123X

Abd. Rahman, Amirah and Kamardin, Kamilia and Yamada, Yoshihide (2019) Electromagnetic waves propagation for hyperthermia application. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2019, 25 November 2019 - 27 November 2019, Melaka, Malaysia.

Abd. Rahman, Faridah and Othman, Mohd. Fauzi and Shaharuddin, Nurul Aimi (2015) Analysis methods of EEG signals: A review in EEG application for brain disorder. Jurl Teknologi, 72 . pp. 67-72. ISSN 1279-696

Abd. Rahman, Muhammad Riza (2010) Numerical simulation and wind tunnel measurements of lateral aerodynamic characteristics on simplified automotive model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Design and performance improvement of shaped-beam parabolic reflector antenna for small region coverage by non-symmetrical array feed technique. International Journal of Applied Electromagnetics and Mechanics, 51 (3). pp. 307-318. ISSN 1383-5416

Abd. Rahman, Nurul H. and Islam, Mohammad T. and Yamada, Yoshihide and Michishita, Naobumi (2015) Design of shaped-beam parabolic reflector antenna for Peninsular Malaysia beam coverage and its overlapping feed issues. Applied Computatiol Electromagnetics Society Jourl, 30 (9). pp. 952-958. ISSN 1054-4887

Abd. Rashid, Nor Suhada and Askari, Muhamad (2014) "Litter marks" around oil palm tree base indicating infiltration area of stemflow-induced water. In: National Seminar on Civil Engineering Research, 14-15 April, 2014, Johor Bahru, Malaysia.

Abd. Razak, Mohd. Razif (1987) Petroleum and natural gas engineering-What is it? Buletin FKKKSA, 1 (1). pp. 16-21. ISSN 0128-0740

Abd. Razak, Norhuda and Arshad, Khairil Anuar and Abd. Rahman, Ali and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2004) Artificial neural network modelling for the prediction of carbon surface area. In: The XXI Regional Conference on Solid State Science & Technology 2004, 12-13 October 2004, Hyatt Regency Kinabalu, Sabah, Malaysia.

Abd. Razak, Shukor and Samian, Normalia and Maarof, Mohd. Aizaini (2008) A friend mechanism for mobile ad hoc networks. Proceedings of the 4th International Symposium on Information Assurance and Security, IAS 2008 . pp. 243-248.

Abd. Razak, Azli and Mohd. Rodzi, Mohd. Azhari and Jumali, Amirul Hakim and Zaki, Sheikh Ahmad (2015) Analysis of pedestrian-level wind velocity in four neighbourhoods in Klang Valley. Jurnal Teknologi, 76 (5). pp. 25-29. ISSN 0127-9696

Abd. Razak, I. F. and Yahya, W. J. and Ithnin, A. M. and Rashid, M. and Zuber, M. A. and Abd. Kadir, H. and Samion, S. and Noge, H. (2021) Effects of different water percentages in non-surfactant water-in-diesel emulsion fuel on the performance and exhaust emissions of a small-scale industrial burner. Clean Technologies and Environmental Policy, 23 (8). ISSN 1618-954X

Abd. Samad, Suzana and Harun, Aizul Nahar and Mohd. Nawi, Mohd. Nasrun and Haron, Nuzul Azam (2018) The potential use of BIM through an electronic submission: A preliminary study. Malaysian Construction Research Journal, 3 (SI1). pp. 82-96. ISSN 1985-3807

Abd. Talib, Norfahana and Mohd. Setapar, Siti Hamidah and Asli, Umi Asiah and Pa'ee, Khairul Faizal and Len, Kelly Yong Tau and Mohd. Nasir, Hasmidah (2020) Silica removal by alkaline hydrogen peroxide treatment to enhance the conversion of rice straw to sugars. In: 4th International Conference on Green Chemical Engineering and Technology: Materials Science, GCET 2019, 1 - 2 October 2019, Melaka, Malaysia.

Abd. Talib, Norfahana and Sing Chuong, Chuo and Mohd. Setapar, Siti Hamidah and Asli, Umi Asiah and Pa’ee, Khairul Faizal and Yong, Kelly Tau Len (2020) Trends in adsorption mechanisms of fruit peel adsorbents to remove wastewater pollutants (Cu (II), Cd (II) and Pb (II)). Journal of Water and Environment Technology, 18 (5). pp. 290-313. ISSN 1348-2165

Abdalhadi, Ibraik S. (2012) Temporal normalization positioning towards recognition of Arabic character speech using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdelrhman, Ahmed M. and Leong, M. Salman and Hee, Lim Meng and Al-Obaidi, Salah M. Ali (2015) Segregation of close frequency components based on reassigned wavelet analysis for machinery fault diagnosis. Lecture Notes in Mechanical Engineering, 19 . pp. 581-590. ISSN 2195-4356

Abdllah Sani, Zarifah Sofia (2011) Safety culture on construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdol Rahim, Fatin Hamizah and Mohd. Noor, Norliza and Abdullah, Haslaile and Annanurov, Bayram (2020) Cost minimization of aircraft critical components for planning and maintenance requirements. International Journal of Integrated Engineering, 12 (7). pp. 40-53. ISSN 2229-838X

Abdul, Mohd Syukor and Mohd Sam, Suriani and Mohamed, Norliza and Kamardin, Kamilia and Dziyauddin, Rudzidatul Akmam (2019) Docker containers usage in the internet of things: a survey. Open International Journal of Informatics, 7 (2). pp. 208-220. ISSN 2289-2370

Abdul, R. H. and Kang, X. K. and Che, F. Y. and Lee, M. E. S. and Narayanan Aqilah Leela, T. (2016) Robotic assessment modules for upper limb stroke assessment: Preliminary study. Journal of Medical Imaging and Health Informatics, 6 (1). pp. 157-162. ISSN 2156-7018

Abdul Air, Irdayati (2005) Kadar ketersediaan tanah untuk pembangunan perumahan di kawasan bandar menurut rancangan tempatan daerah : keberkesanannya dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Awal, A. S. M. and Hussin, M. W. (2009) Strength modulus of elasticity and shrinkage behaviour of POFA concrete. Malaysian Journal of Civil Engineering, 21 (2). pp. 125-134. ISSN 1823-7843

Abdul Aziz, Ramlan and Kamsah, Mohd Zaki and Ripin, Adnan and Ibrahim, Kamarul Asri (1992) UTM's chemical engineering pilot plant: a perspective. Prosiding Simposium Jurutera Kimia Malaysia Ke-8 .

Abdul Aziz, Ramlan and Muhammad, N. A. I. and Taher, Z. M. (2005) Peningkatan kesejahteraan dan produktiviti komuniti dengan penggunaan rawatan alternatif serta penglibatan dalam industri herba. In: Konvensyen Kebangsaan Kecemerlangan Sosial dan Pembangunan Komuniti, 16-17 Mei 2005, Hotel Equatorial, Bandar Hilir Melaka.

Abdul Aziz, Ramlan and Muhammad, N. A. I. and Taher, Z. M. and Zainol, N. A. (2005) Penyelidikan semasa ke atas herba tempatan bagi mengekalkan kesihatan. In: Konvensyen Seni Rawatan Dan Kecantikan Secara Tradisi 2005, 5-6 Mac 2005, Kompleks Mawar, Johor Bharu.

Abdul Aziz, Ramlan and Saidi, Hamdani and Ripin, Adnan and Mohamed, Nor H. (1991) Feasibility of filtering crude palm oil slurry. In: Second Particulate Technology Conference PARTEC 91.

Abdul Aziz, Abdul Hadi (2012) Structure and tribological properties of post-sputtered annealing nickel titanium alloy coatings onto 316l stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Ramlan and Sarmidi, Mohd Roji and Kumaresan, Sivakumar and Chwan, Dominic Yee Foo (2005) Engineering aspects of herbal and phytochemical processing: a Malaysian perspective. Jurutera . pp. 10-19.

Abdul Aziz, S. A. and Mazlan, S. A. and Nik Ismail, N. I. and Choi, S. B. and Ubaidillah, Ubaidillah and Yunus, N. A. B. (2017) An enhancement of mechanical and rheological properties of magnetorheological elastomer with multiwall carbon nanotube. Journal of Intelligent Material Systems and Structures, 28 (20). ISSN 3127-3138

Abdul Aziz, Siti Aishah and Abdull Aziz, Mohd Syafiq and Shabdin, Muhammad Kashfi and Mazlan, Saiful Amri and Nordin, Nur Azmah and Yahaya, Hafizal and Mohd. Rosnan, Rizuan (2020) Rheological properties of Mg substituted cobalt nickel ferrite nanoparticles as an additive in magnetorheological elastomer. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Ubaidillah, U. and Mohamad, Norzilawati and Choi, Seung Bok and Che Aziz, Mohamad Amirul and Johari, Mohd. Aidy Faizal and Koji, Homma (2020) Thermal aging rheological behavior of magnetorheological elastomers based on silicone rubber. International Journal of Molecular Sciences, 21 (23). pp. 1-17. ISSN 1661-6596

Abdul Aziz, Siti Aishah and Ubaidillah, Ubaidillah and Mazlan, Saiful Amri and Nik Ismail, Nik Intan and Choi, Seung-Bok (2018) Implementation of functionalized multiwall carbon nanotubes on magnetorheological elastomer. Journal of Materials Science, 53 (14). pp. 10122-10134. ISSN 0022-2461

Abdul Aziz, Zarith Asyikin and Mohd. Nasir, Hasmida and Ahmad, Akil and Mohd. Setapar, Siti Hamidah and Wong, Lee Peng and Sing, Chuong Chuo and Khatoon, Asma and Umar, Khalid and Yaqoob, Asim Ali and Mohamad Ibrahim, Mohamad Nasir (2019) Role of nanotechnology for design and development of cosmeceutical: Application in makeup and skin care. Frontiers in Chemistry, 7 . p. 739. ISSN 2296-2646

Abdul Aziz, Badhrulhisham and Hassan, Onn and Othman, Mohd Rasid (1990) Teknologi osmosis balikan: teori dan penggunaannya. Buletin FKKKSA, 4 (1). pp. 25-28. ISSN 0128-0740

Abdul Aziz, Mustafa Kamal and Sulong, Mohamad and Morad, Noor Azian and Lee, Thian Teck and Ayob , Azam (1989) The influence of plate and packed column on the mass transfer of free fatty acids from palm oil mixtures. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 265-273.

Abdul Aziz, Mustafa Kamal and Sulong, Mohd. and Morad, Noor Azian and Ibrahim, Mohd. Radzi and Sharaai, Md. Jefri (1989) Process modelling and simulation of crude palm oil refining. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 422-431.

Abdul Aziz, Ramlan and Mahadi, Khairul Anuar (1988) Konsep mikropenurasan aliran silang (MAS) dan penggunaannya di industri. Buletin FKKKSA, 1 (2). pp. 19-26. ISSN 0128-0740

Abdul Bujang, S. D. and Selamat, A. and Ibrahim, R. and Krejcar, O. and Viedma, E. H. and Fujita, H. (2021) Multi-class prediction model for student grade prediction using machine learning. IEEE Access, 9 . 95608 -95621. ISSN 2169-3536

Abdul Halim, I. S. and Kobayashi, F. and Watanabe, M. and Mashiko, K. and Ooi, C. Y. (2017) Small Area Implementation for Optically Reconfigurable Gate Array VLSI: FFT Case. Journal of Scientific & Industrial Research, 76 (11). pp. 697-700. ISSN 0022-4456

Abdul Halim, Syafrina (2016) Projections of future extreme rainfall events using statistical downscaling in Malaysia. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School in Engineering and Advanced Technology.

Abdul Halim, Zainab Zakirah and Azmi, Dania Salsabila and Marni, Nurazmallail (2019) Media Sosial dan Trend Penggunaan Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019, 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Abdul Hamid, Abdul Hadi Fikri and A. Rashid, Rozeha and Fisal, Norsheila and Syed Yusof, Sharifah Kamilah and Ariffin, S. H. S. and Latiff, Liza (2009) Development of IEEE802.15.4 based wireless sensor network platform for image transmission. International Journal of Engineering & Technology (IJET), 9 (10). pp. 112-118. ISSN 1793-8244 (online) ; 1793-8236 (print)

Abdul Hamid, Mohd. Kamiel and Stachowiak, G. W. (2009) Effect of hard particle grift size on friction coefficents and embedment of automotive braking system. Jurnal Mekanikal (29). pp. 1-18. ISSN 0127-3396

Abdul Hamid, U. Z. and Zamzuri, H. and Yamada, T. and Abdul Rahman, M. A. and Saito, Y. and Raksincharoensak, P. (2018) Modular design of artificial potential field and nonlinear model predictive control for a vehicle collision avoidance system with move blocking strategy. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 232 (10). pp. 1353-1373. ISSN 0954-4070

Abdul Hamid, Umar Zakir and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Yahya, Wira Jazair (2016) A safe-distance based threat assessment with geometrical based steering control for vehicle collision avoidance. Journal of Telecommunication, Electronic and Computer Engineering, 8 (2). pp. 53-58. ISSN 2180-1843

Abdul Hamid, Abu Bakar and Hashim, Noor Hazarina (2007) Purchasing in corporate strategic planning. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Hanif, Harliansyah and Murad, Noor Azian and Wan Ngah, Wan Zurinah and Mohd. Yusof, Yasmin Anum (2005) Effects of zingiber officinale on superoxide dismutase, glutathione peroxidase, catalase, glutathione and malondialdehyde content in HepG2 cell line. Malaysian Journal of Biochemistry and Molecular Biology, 11 (1). ISSN 1511-2616

Abdul Jabar, Muhammad Hussin and Abdul Manaf, Norhuda and Jamian, Nor Ruwaida (2021) The emergence of phase change material in solar thermal energy: A scientometric review. ASM Science Journal, 16 . pp. 1-9. ISSN 1823-6782

Abdul Jalil, Aishah and Nobuhito, K. and Tokuda, M. (2004) Synthesis of precursor of anti-inflammatory agents by using highly reactive zinc. Medical Journal of Malaysia , 59 . pp. 210-211. ISSN 03005283 (Submitted)

Abdul Jalil, Aishah and Triwahyono, Sugeng and Kurono, Nobuhito and Takasugi, Shingo and Tokuda, Masao (2005) Highly reactive electrogenerated zinc: preparation and its use in cross-coupling reactions. The Journal of The Institution of Engineers, Malaysia, 66 (1). pp. 53-60. ISSN 0126-513X

Abdul Jalil, Aishah and Idris, Ani and Triwahyono, Sugeng and Tokuda, Masao (2004) Decontamination of chlorobenzene by electrochemical method. In: Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), 24-26 Ogos 2004, Swiss-Garden Resort, Pantai Balok, Kuantan.

Abdul Jalil, Aishah and Kurono, Nobuhita and Takasugi, Shingo and Tokuda, Masao (2004) Facile preparation of highly reactive electrogenerated zinc. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies,UTM. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Takasugi, Shingo and Tokuda, Masao (2004) Efficient cross-coupling reaction of functionalized alkyl bromides with aryl halides by using electrochemical method. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies, UTM. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Tokuda, Masao (2004) Determination of optimum conditions in preparing highly reactive electrogenerated zinc by gas chromatograph. In: Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), 24-26 Ogos 2004, Swiss-Garden Resort, Pantai Balok, Kuantan. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Tokuda, Masao (2004) Determination of structure of precursor of ibuprofen: purification and analysis. In: Simposium Kimia Analisis Malaysia Ke-17 (SKAM-17), 24-26 Ogos 2004, Swiss-Garden Resort, Pantai Balok, Kuantan. (Submitted)

Abdul Jalil, Aishah and Kurono, Nobuhito and Tokuda, Masao (2004) Synthesis of precursor of anti-cancer drugs. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies, UTM. (Submitted)

Abdul Jalil, Aishah and Sundang, Murni and Tajuddin, Norhuda and Akhbar, Suffiyana and Idris, Ani and Triwahyono, Sugeng and Awang Panjang, Noor Fatimah and Tokuda, Masao (2005) Effect of mediator on decontamination of chloroaromatic compounds by using electrochemical method. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah. (Submitted)

Abdul Jalil, Aishah and Sundang, Murni and Triwahyono, Sugeng and Muhd. Muhid, Muhd. Nazlan and Kurono, Nobuhito and Tokuda, Masao (2005) Effect of mediator on preparation of highly reactive electrogenerated zinc and its use in cross coupling reaction. In: International Advanced Technology Congress 2005 (ACTi 05), 6-8 Disember 2005, IOI Marriott Hotel, Putrajaya, Kuala Lumpur. (Submitted)

Abdul Jalil, Aishah and Sundang, Murni and Triwahyono, Sugeng and Muhd. Muhid, Muhd. Nazlan and Kurono, Nobuhito and Tokuda, Masao (2005) New preparation method of highly reactive electrogenerated zinc and its use in cross-coupling reaction of functionalized organic bromides with aryl halides by using electrochemical method. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah. (Submitted)

Abdul Jalil, Aishah and Tokuda, Masao (2004) Dechlorination of monochlobenzene by using electrochemical method. In: 3rd Annual Seminar On Sustainbility Science And Management 2004, 4-5 May 2004, Kolej Universiti Sains dan Teknologi Malaysia (KUSTEM).

Abdul Jalil, Aishah and Tokuda, Masao (2004) Dechlorination of monochlorobenzene by using electrochemical method. In: Annual Fundamental Science Seminar 2004 (AFSS 2004), 14-15 June 2004, Ibnu Sina Institute for Fundamental Science Studies, UTM. (Submitted)

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Tamin, Mohd. Nasir and Lee, Faisal Abidin (2007) Interface micromotion failure simulation of cementless hip prosthesis. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Kadir, Azah and Sarip, Shamsul and Nik Mahmood, Nik Hasnaa and Mohd. Yusof, Sha'ri and Hassan, Mohamad Zaki and Md. Daud, Mohd. Yusof and Abdul Aziz, Sa'ardin (2015) A review of integrated management system in the offshore oil and gas industry. Journal of Advanced Review on Scientific Research, 12 (1). pp. 11-25. ISSN 2289-7887

Abdul kadir, Bashir Abubakar and Dennis, John Ojur and Abd. Shukur, Muhammad Fadhlullah and Nasef, Mohamed Mahmoud Elsayed and Usman, Fahad (2020) Preparation and characterization of gel polymer electrolyte based on PVA-K2CO3. Polymer-Plastics Technology and Materials, 59 (15). pp. 1679-1697. ISSN 2574-0881

Abdul Kadir, Mohammed Rafiq and Heidari, M. and Fallahiarezoodar, A. and Alizadeh, M. (2011) Stress distribution analysis on semi constrained elbow prosthesis during flexion and extension motion. In: 5th Kuala Lumpur International Conference on Biomedical Engineering 2011. Springer, Kuala Lumpur, pp. 215-218. ISBN 978-364221728-9

Abdul Kadir, Mohd. Rashdan (2011) Information technology (IT) in supply chain management : supplier-manufacturer information collaboration system development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kareem, Firas A. and Mohd. Shariff, Azmi and Ullah, Sami and See, Tan Lian and Keong, Lau Kok and Mellon, Nurhayati (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor-binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64 . pp. 173-187. ISSN 1226-086X

Abdul Karim, Khairuddin and Ali, Jusni (1990) Kajian ekonomi tentang pemprosesan ilmenit sebagai bahan pemberat. Buletin FKKKSA, 4 (1). pp. 5-11. ISSN 0128-0740

Abdul Latif, Fazilah (1989) Phenyl boronate column fractionation of high molecular weight RNA. Buletin FKKKSA, 3 (2). pp. 11-19. ISSN 0128-0740

Abdul Latif, Fazilah and Salim, Norizah (1993) Penulenan dan penjujukan protein hirudin daripada lintah tempatan (hirudinaria manillensis) bagi penghasilan protein hirudin secara skala besar pada peringkat industri. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-6.

Abdul Latif, Fazilah (1994) Isolation of antithrombin protein from local leeches (hirudinaria manillensis). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Abdul Latiff, Nurul Mu'azzah and Syed Yusof, Sharifah Kamilah and Nik Abdul Malik, Nik Noordini (2010) Mobile base station for wireless sensor networks using particle swarm optimization. Project Report. Fakulti Kejuruteraan Elektrik, Skudai, Johor. (Unpublished)

Abdul Majid, Zaiton and Buang, Nor Aziah and Aziz, Madzlan and Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Influence of pretreatment methods on the sorption capacity of carbon nanotubes. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Abdul Majid, Zaiton and Buang, Nor Aziah and Sanip, Suhaila and Adan, Daliza and Ismail, Ahmad Fauzi (2005) Effect of temperature on the sorption characteristic of carbon nanotubes. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Abdul Majid, Zulkifli and Nasir, Abu Samah and Yunus, Sofiah (1995) Kesan kelembapan ke atas kadar kebocoran gas. Buletin FKKKSA . pp. 31-41. ISSN 0128-0740

Abdul Majid @ Zakaria, Zakiah (2007) Perbandingan di antara penghasilan model digital tiga dimensi dan model fizikal bagi craniofacial tisu keras. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Majid, Fadzilah Adibah and Al-Rubeai, Mohamed (2001) The effect of bcl-2 over-expression on hybridoma cell line cultured in different serum free media. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 524-530.

Abdul Majid, Fadzilah Adibah and Md. Salleh, Liza and Jusoh, Mazura and Borham, Abdul Jalil (2004) Educating Engineers: Contribution Of Muslim Women Educators In Universiti Teknologi Malaysia. In: Contribution of Muslim Women Engineering Educators of UTM to the Society, March 2004, Universiti Teknologi Malaysia. (Unpublished)

Abdul Majid, Zulkifli (1992) Liquefied natural gas. Buletin FKKKSA, 6 (1). pp. 15-20. ISSN 0128-0740

Abdul Majid, Zulkifli and Yaacob, Zulkefli and King, Martin Philip Ik Pau and Yahya, Mohd Adnan and Abd. Razak, Mohd. Masri (2001) Emission characteristics of bi-fuel motorcycle. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 372-377.

Abdul Malik, Mirda (2011) Variation in oil and gas construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Malik, Samir Sani (2012) Effect of zinc addition on the properties of magnesium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Manaf, Norhuda and Abbas, Ali (2021) Investment decision making for carbon capture and storage technology in high efficiency, low-emission coal-fired power plant via dynamic techno-economic-policy evaluation framework: Case study in China. Chemical Engineering Transactions, 83 . pp. 25-30. ISSN 2283-9216

Abdul Manaf, Nur'Azah and Abu Bakar, Mohd. Rizam and Ibragimov, Gafurjan (2015) Utilization of reproducing kernel hilbert space method. International Journal Of Applied Mathematics And Statistics, 53 (6). pp. 167-172.

Abdul Manan, Zainuddin (2003) Systematic design and synthesis of heat, mass and water recovery networks using pinch analysis. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 443-446.

Abdul Manan, Zainuddin (2004) New advances in process integration research. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Abdul Manan, Zainuddin and Lim, Chee Siang and Sarmidi, Mohd. Roji (2005) Development of a new process for palm oil refining based on supercritical fluid extraction technology. In: Symposium Of Malaysian Chemical Engineers SOMChE 2005, 8-10 Dec 2005, Universiti Malaysia Sabah. (Submitted)

Abdul Manan, Zainuddin and Mutalib, M. I. A. (1992) Pinch technology: Supertargetting for optimum synthesis of energy recovery networks. In: The 8th Symposium of Malaysian Chemical Engineers (SOMChE ) 1992, 14-15 October 1992, Kuala Lumpur.

Abdul Manan, Zainuddin and Yin, Ling Tan and Chwan, Dominic Yee Foo (2004) Targeting the minimum water flow rate using water cascade analysis technique. AIChE Journal, 50 (12). pp. 3169-3183.

Abdul Manan, Zainuddin (2001) Maximizing energy efficiency in the process industries using pinch analysis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 484-491.

Abdul Manan, Zainuddin and Mohd Yusof, Feruz (1994) Retrofit of palm oil refinery to improve energy consumption and reduce fouling costs. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Abdul Manan, Zainuddin and Ooi, Boon Lee (2001) A software for energy optimisation using pinch analysis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 266-270.

Abdul Mukti, Mohamad Afifi and Mohd. Noor, Fatimah (2004) Engineering education - the hidden agenda. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abdul Rabu, S. N. and Mohd. Mahdzir, A. and Aris, B. and Tasir, Z. (2017) Assessing critical thinking skills of faculty of education undergraduate students with MaCTIv4 (Malaysian critical thinking instrument - Version 4). Man in India, 97 (17). pp. 105-119. ISSN 0025-1569

Abdul Raheem, Abdul Azeez and Selamat, Ali and Olatunji, Sunday Olusanya (2011) An hybrid model through the fusion of sensitivity based linear learning method and type-2 fuzzy logic systems for modeling PVT properties of crude oil systems. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Abdul Rahim, Abd. Rahman and Roslan, Roslina (2018) A shariah-compliant airport framework from the perspective of passengers at KL international airport. Advanced Research in Social and Behavioural Science, 10 (1). pp. 9-24. ISSN 2462-1951

Abdul Rahim, Sharul Kamal and Peter, Gardner (2008) Smart antenna beamforming network. In: Recent Developments In Small Size Antenna. Penerbit UTM, Johor, pp. 23-31. ISBN 978-983-52-0640-5

Abdul Rahim, Zulhasni and Abu Bakar, Nooh (2014) Innovative cases of triz application in automotive industry. In: International Graduate Conference on Engineering Science & Humanity 2014 (IGCESH 2014), 19-21 August, 2014, Johor Bahru, Malaysia.

Abdul Rahm, Nurul Afifah (2008) High performance computing of heat tranfer visualization involving two dimensional boundary value problem for raw rubber material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Rahman, Ali and Arshad, Khairil Anuar and Abd. Razak, Norhuda and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Hydrogen desorption study of as-synthesized carbon nanotubes using artificial neural network. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Abdul Rahman, Alias and Chen, Tet Khuan (2008) Extending the existing Geo-Dbms to third dimension: The 3D data type and spatial operations. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Chen, Tet Khuan (2008) Extending the existing geo-dbms to third dimension: the 3D data type and spatial operations. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Chen, Tet Khuan and Azri, Nor Suhaibah and Buyuksalih, Gurcan (2008) Developing 3D geo DBMS for terrestrial laser scanning data. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 29-54. ISBN 978-983-52-0584-4

Abdul Rahman, Alias and Chen, Tet Khuan and Azri, Nor Suhaibah and Gurcan, Buyuksalih (2008) 3D geospatial database from terrestrial /laser scanning (TLS) data. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Dionnald, Beh BoonHeng (2008) Developing 3D geoportal for Wilayah Persekutuan Iskandar. In: 7th Annual Asian Conference & Exhibition on Geopastial Information, Technology and Application, 18-20 August 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Abdul Rahman, Alias and Zlatanova, Sisi and Pilouk, Morakot (2001) The 3D GIS software development : global efforts from researchers and vendors. Geoinformation Science Journal, 1 (2).

Abdul Rahman, Mohamad Sofiuddin (2012) Pengawalan kos projek pembinaan oleh kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Mohd. Azizi and Zamzuri, Hairi (2018) Vehicle localization using wheel speed sensor (WSS) and inertial measurement unit (IMU). Journal of the Society of Automotive Engineers Malaysia, 2 (1). pp. 43-59. ISSN 2550-2239

Abdul Rahman, Norhafizah and Shamsuddin, Shuhana and Ghani, Izham (2015) What makes people use the street?: Towards a liveable urban environment in Kuala Lumpur city centre. Asian Conference on Environment-Behaviour Studies (ACE-BS 2014 Seoul), 170 . pp. 624-632. ISSN 1877-0428

Abdul Rahman, Shahnurriman (2012) Static voltage stability assessment with continuation power flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rahman, Alias (1994) A Program To Generalize Contour Lines. Buletin Ukur, 5 (2). pp. 89-103. ISSN 0128-4274

Abdul Rahman, Alias (2005) Developing three dimensional topological model for 3D GIS. Project Report. Faculty of Geoinformation Science and Engineering, Skudai, Johor. (Unpublished)

Abdul Rahman, Alias (1994) Digital Terrain Model Data Structures. Buletin Ukur, 5 (1). pp. 61-72. ISSN 0128-4274

Abdul Rani, Mohd. Haris and Yusof, Muhammad Fathi and Mohd. Mahdzir, Akbariah and Awang, Adibah and Jaafar, A. Bakar and Shaukat, Sharina and Abu Hassan, Hairil Anuar (2017) Legal considerations on OTEC deployment in Malaysia. Journal of Science, Technology and Innovation Policy, 3 (1). pp. 34-39. ISSN 2550-2018

Abdul Razak, Noor Zainab and Ibrahim, Noor Mala and Mohd. Omar, Abidah and Attan, Anie and Abdullah, Khairi Izwan and Awang, Zubaidah (2006) The communicative performance of UTM Graduates : employers' and employees' expectations and assessment. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Razak, Mohd. Razif (1991) Downhole measurement: MWD. Buletin FKKKSA, 5 (2). pp. 47-52. ISSN 0128-0740

Abdul Sani, M. F. A. and Muhamad, R. and Abdulrahman, H. (2020) Bond stress-slip of fly ash-based geopolymer concrete: a review. In: 4th International Conference on the Science and Engineering of Materials, ICoSEM 2019, 26 August 2019 - 28 August 2019, Kuala Lumpur, Malaysia.

Abdul Sani, M. F. A. and Muhamad, Rahimah and Mo, Kim Hung (2020) Effect of ground granulated blast furnace slag as partial replacement in fly ash-based geopolymer concrete. In: 3rd National Conference on Wind and Earthquake Engineering, NCWE 2019 and International Seminar on Sustainable Construction Engineering, ISCCE 2019, 12 July 2019 - 13 July 2019, Kuala Lumpur, Malaysia.

Abdul Talib, Hayati and Jamaludin, Khairur Rijal (2003) Aplikasi teknologi maklumat (IT) dalam pengurusan organisasi : sorotan kajian. Jurnal teknikal dan kajian sosial, 1 (2). pp. 89-105. ISSN 1675-2228

Abdul Talib, Hayati@Habibah and Mohd. Ali, Khairul Anuar and Idris, Fazli (2009) A review of relationship between quality management and organizational performance : a study of food processing SMEs. In: 2009 2nd IEEE International Conference on Computer Science and Information Technology, ICCSIT 2009, 8th - 11th August 2009, Beijing, China.

Abdul Wahab, A. M. and Nuh, A. and Rasid, Z. A. and Abu, A. and Tanasta, Z. and Hassan, M. Z. and Mahmud, J. (2018) Tensile behaviours of single-walled carbon nanotubes. Materialwissenschaft UND Werkstofftechnik, 49 (4). pp. 467-471. ISSN 0933-5137

Abdul Wahab, Abdul Malek and Rasid, Z. A. and Makhtar, Ahmad Khushairy and Mahmud, Jamaluddin (2021) Assessing the validity of torsional motion on dynamic analysis of rotor bearing system using finite element. In: 3rd International Conference on Separation Technology, ICoST 2020, 15 - 16 August 2020, Virtual, Online.

Abdul Wahab, Nur Haliza and Latif, L. A. and Ariffin, S. H. S. and Fisal, N. and Ghazali, N. Effiyana (2015) Route optimization in proxy mobile IPv6 test-bed via RSSI APPs. In: 1st International Conference on Communication and Computer Engineering, ICOCOE 2014, 20 - 21 May 2014, Malacca, Malaysia.

Abdulahad, Bawer Marwan (2013) An exploratory study on Universiti Teknologi Malaysia’s innovation towards commercialization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abdulghafor, R. and Abdullah, S. S. and Turaev, S. and Zeki, A. and Al-Shaikhli, I. (2020) Linear and nonlinear stochastic distribution for consensus problem in multi-agent systems. Neural Computing and Applications, 32 (1). pp. 261-277. ISSN 0941-0643

Abdulghafor, Rawad and Abdullah, Shahrum Shah and Turaev, Sherzod and Othman, Mohamed (2018) An overview of the consensus problem in the control of multi-agent systems. Journal for Control, Measurement, Electronics, Computing and Communications, 59 (3). pp. 143-157. ISSN 0146-4116

Abdulla Althawadi, Jamal Jasim and Hashim, Mazlan (2020) Satellite-based detection of oil spill signature residual using synergy multispectral images of Landsat-8 OLI and Landsat-7 ETM+. In: 40th Asian Conference on Remote Sensing: Progress of Remote Sensing Technology for Smart Future, ACRS 2019, 14 October 2019 - 18 October 2019, Daejeon Convention Center (DCC) Daejeon, South Korea.

Abdullah, Roslina and Saidi, Hamdani (2004) A study of dynamic behaviour of proton exchange membrane fuel cell stack. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Abdullah, A. C. and Ooi, C. Y. and Ismail, N. B. and Mohammad, N. B. (2016) Power-aware through-silicon-via minimization by partitioning finite state machine with datapath. In: 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, 22 May 2016 through 25 May 2016, Montreal's Sheraton CentreMontreal; Canada.

Abdullah, Abdul Hamid and Shahrudin, Shahrin (1989) Pengurusan dan rawatan bahan buangan berjadual di Malaysia. Buletin FKKKSA, 3 (1). pp. 1-16. ISSN 0128-0740

Abdullah, C. and Kaidi, H. A. and Sarip, S. and Shafie, N. (2021) Small scale standalone solar and tidal hybrid power system in isolated area. Renewable Energy Focus, 39 . ISSN 1755-0084

Abdullah, D. and Abd. Aziz, M. I. and Mohd. Ibrahim, A. L. (2017) The stories they tell: understanding international student mobility through higher education policy. Journal of Studies in International Education, 21 (5). pp. 450-466. ISSN 1028-3153

Abdullah, Ezzat Chan (2017) Toughness enhancement of zirconia-toughened alumina ceramic composite using multi-phasic additives and microwave heat treatment. PhD thesis, Universiti Teknologi Malaysia.

Abdullah, Hasnan (Translator) (1994) Pengurusan penyelenggaraan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0024-6

Abdullah, M. A. and Zakariya, R. and Hasan, R. C. (2019) Statistical relationship between multibeam backscatter, sediment grain size and bottom currents. In: 10th National Technical Seminar on Underwater System Technology, NUSYS 2018, 26-27 Sep 2018, Pahang, Malaysia.

Abdullah, Mohammad Faiz Liew and Elrowayati, Ali A. and Abdul Manaf, Azizah and Zubi, Zakaria Suliman (2015) Recent methods and techniques in video watermarking and their applicability to the next generation video codec. Journal of Theoretical and Applied Information Technology, 74 (1). pp. 93-103. ISSN 1992-8645

Abdullah, N. H. and Shameli, K. and Abdullah, E. C. and Abdullah, L. C. (2017) A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles. Chinese Chemical Letters, 28 (7). pp. 1590-1596. ISSN 1001-8417

Abdullah, N. H. and Shameli, K. and Nia, P. M. and Etesami, M. and Abdullah, E. C. and Abdullah, L. C. (2020) Electrocatalytic activity of starch/Fe3O4/zeolite bionanocomposite for oxygen reduction reaction. Arabian Journal of Chemistry, 13 (1). pp. 1297-1308. ISSN 1878-5352

Abdullah, N. H. and Shameli, K. and Etesami, M. and Chan Abdullah, E. and Abdullah, L. C. (2017) Facile and green preparation of magnetite/zeolite nanocomposites for energy application in a single-step procedure. Journal of Alloys and Compounds, 719 . pp. 218-226. ISSN 0925-8388

Abdullah, Nasuha Lee (2014) Operational complexity impact on quality and performance of electrical and electronics industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Abdullah, Noraini and Ismail, Saiful Azmi and Yuhaniz, Siti Sophiayati and Mohd. Sam, Suriani (2015) Data quality in big data: A review. Interntional Journal Of Advances In Soft Computing And Its Applications, 7 (Specia). pp. 16-27. ISSN 2074-8523

Abdullah, Nur Faizal (2006) Faktor yang dipertimbangkan sebelum membangunkan harta tanah perumahan dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah, Nur Iffah Shafiqah and Ahmad, Mansor and Shameli, Kamyar (2015) Biosynthesis of silver nanoparticles using Artocarpus elasticus stem bark extract. Chemistry Central Journal, 9 . p. 61. ISSN 1750-6220

Abdullah, Nurul Hidayah and Shameli, Kamyar and Abdullah, Ezzat Chan and Abdullah, Luqman Chuah (2019) Solid matrices for fabrication of magnetic iron oxide nanocomposites: Synthesis, properties, and application for the adsorption of heavy metal ions and dyes. Composites Part B: Engineering, 162 . pp. 538-568. ISSN 1359-8368

Abdullah, Shahrum Shah and Ishaque, K. and Saleem, Y. and Amjad, M. and Rashid, M. (2011) Single input fuzzy logic controller for magnetic levitation system. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, Kuala Lumpur, pp. 1-6. ISBN 978-145770003-3

Abdullah Al-Muhandes, Mohammed Ali (2012) Oil fate and slick trajectory prediction for marine oil pollution control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah Ghazali, Noor Iziddin and Mohd. Izhar, Mohd. Azri and Akmam Dziyauddin, Rudzidatul (2020) Energy cost reduction for telecommunication towers using hybrid energy storage. InternationalJournal of Advanced Trends in Computer Science and Engineering, 9 (1.5). pp. 213-218. ISSN 2278-3091

Abdullah Habib, Siti Nora Haryati and Ismail, Syuhaida and Syed Khuzzan, Sharifah Mazlina (2020) Risk factors towards public-private partnerships (PPP) projects implementing building information modelling (BIM) in the United Kingdom (UK): A lesson learnt for Malaysia. Planning Malaysia, 18 (4). pp. 340-351. ISSN 1675-6215

Abdullah, Khairul Anuar (1994) The Design of L3D-HEIGHT Program for Orthometric Height Determination Using GPS And Terrestrial Geodetic Data. Buletin Ukur, 5 (2). pp. 79-87. ISSN 0128-4274

Abdullahi, Muhammad and Othman, Nooraini (2020) Bridging the gap between policy intent and implementation. Journal Of Science, Technology & Innovation Policy, 6 (1). pp. 1-10. ISSN 2550-2018

Abdullahi, Mu’azu Mohammed and Mas’ud, Abdullahi Abubakar and Mas’ud, Ibrahim Abubakar and Ardila-Rey, Jorge Alfredo and Muhammad-Sukki, Firdaus and Karim, Ridoan and Mohd. Saudi, Ahmad Shakir and Bani, Nurul Aini and Wirba, Asan Vernyuy (2021) A review of building integrated photovoltaic: case study of tropical climatic regions. International Journal of Power Electronics and Drive Systems, 12 (1). pp. 474-488. ISSN 2088-8694

Abdur Razzak, M. and Bhuiyan, W. T. and Natasha, N. I. and Muzahidul Islam, A. K. M. and Amin, M. K. M. (2016) Design of a grid-connected photovoltaic inverter with maximum power point tracking using perturb and observe technique. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1212-1220. ISSN 2088-8694

Abed, E. Y. and Madhoun, W. A. and Elmanama, A. A. and Kim, H. and Xu, X. and Ros, F. C. (2020) Appraisal of indoor microbial pollutants at university research labs and offices under Mediterranean climate. In: 3rd EPI International Conference on Science and Engineering 2019, EICSE 2019, 24 - 25 September 2019, Gowa, South Sulawesi.

Abidin, N. A. Z. and Abdullah, M. P. and Al-Qaim, F. F. and Khalik, W. M. A. W. M. and Othman, M. R. (2018) Assessing stir bar sorptive extraction for triazine herbicides extraction by using a central composite design approach. Malaysian Journal of Analytical Sciences, 22 (1). ISSN 1394-2506

Abiodun, Folorunso Taliha (2013) Pump scheduling optimization for water supply system using adaptive weighted sum genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abolghasemi, Maryam (2018) Project performance framework for stakeholder of residential construction project. PhD thesis, Universiti Teknologi Malaysia.

Abolghasemi, Maryam and Ismail, Syuhaida and Mohd. Sharif, Normawati and Kookhdan, Alireza Rezanezhad and Mardani, Abbas (2018) Enhancing the performance of residential construction project through stakeholder satisfaction: the application of structural equation modelling (SEM). Transformations in Business & Economics, 17 (2). pp. 107-136. ISSN 1648-4460

Abookazemi, Kaveh and Mustafa, Mohd. Wazir and Ahmad, Hussein (2009) Structured genetic algorithm technique for unit commitment problem. International Journal of Recent Trends in Engineering, 1 (3). pp. 135-139. ISSN 1797-9617

Abouzari-lotf, Ebrahim Abouzari and Nasef, Mohamed Mahmoud and Ghassemi, Hossein and Zakeri, Masoumeh and Ahmad, Arshad and Abdollahi, Yadollah (2015) Improved methanol barrier property of Nafion hybrid membrane by incorporating nanofibrous interlayer self-immobilized with high level of phosphotungstic acid. ACS Applied Materials and Interfaces, 7 (31). pp. 17008-17015. ISSN 1944-8244

Abraham, Ajith and Sulaiman, Sarina and Shamsuddin, Siti Mariyam (2011) Intelligent web caching using adaptive regression trees, splines, random forest and tree net. In: The 3rd Conference On Data Mining And Optimization(Dmo 11).

Abrianto, H. H. and Mohamed, N. and Dziyauddin, R. A. and Sam, S. M. (2020) Reconfiguration of double stub feeding in microstrip antenna array for wlan and wimax. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.5). pp. 266-272. ISSN 2278-3091

Abu, Aminudin and Yunus, Mohd. Azmi and Abdul Rani, Muhammad Norhisham and Othman, Nor Azizi (2008) On the sensitivity analysis of dynamic characteristics for structural modification. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 1-17. ISBN 978-983-52-0563-7

Abu, F. and Gholami, H. and Zakuan, N. and Saman, M. Z. M. and Streimikiene, D. and Streimikis, J. (2020) The influence of contextual factors on the implementation of lean practices: an analysis of furniture industries. Amfiteatru Economic, 22 (55). ISSN 1582-9146

Abu, M. Y. and Jamaluddin, K. R. and Zakaria, M. A. (2016) Classification of crankshaft remanufacturing using Mahalanobis-Taguchi system. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3413-3422. ISSN 2229-8649

Abu, M. Y. and Jamaludin, K. R. and Zakaria, M. A. (2017) Characterisation of activity based costing on remanufacturing crankshaft. International Journal of Automotive and Mechanical Engineering, 14 (2). pp. 4211-4224. ISSN 2229-8649

Abu Bakar, Aznizam and Hassan, Azman and Mohd Yusof, A. F. (2005) Effect of oil palm empty fruit bunch and acrylic impact modifier on mechanical properties and processability of unplasticized poly(vinyl chloride) composites. Polymer-Plastics Technology and Engineering, 44 . pp. 1125-1137. ISSN 0360-2559

Abu Bakar, Aznizam and Hassan, Azman and Mohd Yusof, A. F. (2005) Mechanical and thermal properties of oil palm empty fruit bunch-filled unplasticized poly (vinyl chloride) composites. Polymers & Polymer Composites, 13 (6). pp. 607-618. ISSN 0967-3911

Abu Bakar, Aznizam and Hassan, Azman and Mohd Yusof, Ahmad Fuad (2005) Effect of accelerated weathering on the mechanical properties of oil palm empty fruit bunch filled UPVC composites. Iranian Polymer Journal, 14 (7). pp. 627-635.

Abu Bakar, A. and Mohd. Rasol, R. and Nordin, Y. and Md. Noor, N. and Mohd. Ali, M. K. F. (2015) Turbidity method to measure the growth of anaerobic bacteria related to microbiologically influenced corrosion. In: International Scientific Conference Corrosion, 2014, 18 - 21 November 2014, Gliwice, Poland.

Abu Bakar, Aznizam (2006) Mechanical, thermal and processing properties of oil palm empty fruit bunch-filled impact modified unplasticised poly (vinyl chloride) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Bakar, Kamalrulnizam and Bernard, S. Doherty (2007) An enhancement of the random sequence 3-level obfuscated algorithm for protecting agents malicious hosts. International Journal of Computers Communication & Control, 2 (2). pp. 159-173. ISSN 1841-9836

Abu Bakar, Karimah@Aminah and Abdul Rahim,, Nor Zairah and Ibrahim, Roslina (2015) Measurement model of relationship between knowledge management enablers and knowledge management performance in public sector. Lecture Notes In Business Information Processing, 224 . pp. 146-159. ISSN 1865-0473

Abu Bakar, N. A. and Yaacob, S. and Hussein, S. S. and Nordin, A. and Sallehuddin, H. (2019) Dynamic metamodel approach for government enterprise architecture model management. In: 5th Information Systems International Conference, ISICO 2019, 23-24 July 2019, Surabaya, Indonesia.

Abu Bakar, Norsharina and Shamsuddin, Siti Mariyam (2009) United zernike invariants for character images. In: Visual Informatics: Bridging Research and Practice: First International Visual Informatics Conference, IVIC 2009 Kuala Lumpur, Malaysia, November 11-13, 2009 Proceedings. Springer, Berlin/ Heidelberg, pp. 498-509. ISBN 978-3-642-05035-0

Abu Bakar, Nur Azaliah and Mohd. Anuar, Mohd. Syahid and Musa, Norhafizah and Salih Yagoub, Fathi Ibrahim (2018) Iot security risk management model in healthcare. In: 4th International Conference on Information Technology & Society (IC-ITS) 2018, 30 October 2018 - 31 October 2018, Selangor, Malaysia.

Abu Bakar, Nur Azaliah and Mohd. Samsudin, Siti Syakirah (2018) A study on implementation of PKI towards paperless and digitization hospital in Malaysia. Open International Journal of Informatics (OIJI), 6 (2). pp. 84-93. ISSN 2289-2370

Abu Bakar, Nur Azaliah and Ya'acob, Suraya and Hassan, Noor Hafizah (2018) Digital workplace model for research university publication collaboration. International Journal Of Human And Technology Interaction (IJHATI), 2 (2). pp. 91-102. ISSN 2590-3551

Abu Bakar, Rabieahtul (2006) High precision global positioning system data processing velocity vector determination for geodynamic application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abu Bakar, S. H. and Muhammad Sukki, F. and Freier, D. and Ramirez Iniguez, R. and Mallick, T. K. and Munir, A. B. and Mohd. Yasin, S. H. and Abubakar Masud, A. and Bani, N. A. (2016) Performance analysis of a solar window incorporating a novel rotationally asymmetrical concentrator. Energy, 99 . pp. 181-192. ISSN 0360-5442

Abu Bakar, Suhaimi and Saleh, Abd. Latif (2008) Verification of weibull's theory of brittle fracture for local timber loaded in tension parallel to grain. In: Mechanical Properties And Bending Strength Theory For Malaysian Structural Timber. Penerbit UTM, Johor, pp. 1-10. ISBN 978-983-52-0567-5

Abu Hasan, Nooradilla and Miskon, Suraya and Ahmad, Norasnita and Mat Ali, Nazmona and Hashim, Haslina and Syed Abdullah, Norris and Alias, Rose Alinda and Maarof, Mohd. Aizaini (2015) Business intelligence readiness factors for higher education institution. In: 4th International Conference on Research and Innovation in Information System, 8-10 Dec, 2015, Melaka, Malaysia.

Abu Hassan, Mohd Ariffin and Yusof, Rozilawati and Muhamad, Siti Hajar Anaziah (2007) Fenton degradation of linear alkylbenzene sulphonates (LAS). Journal of Chemical and Natural Resources Engineering, 2 . pp. 22-30. ISSN 1833-5255

Abu Hassan, Mohd. Ariffin and Metcalfe, Ian S. (2007) Catalytic wet air oxidation of linear alkylbenzene sulphonate. Journal of Chemical and Natural Resources Engineering, 1 . pp. 1-14. ISSN 1823-5255

Abu Hassan , Mohd Ariffin and Mantzavinos, Dionissios and Metcalfe, Ian S. (2005) Wet air oxidation and ultrasound for the removal of linear alkylbenzene sulfonates from wastewater: the beneficial role of catalysis. Topics in Catalysis, 33 (1-4). pp. 141-148. ISSN 1022-5528

Abu Husain, M. K. and Mohd Zaki, N. I. and Mallahzadeh, H. and Najafian, G. (2016) Short-term probability distribution of the extreme values of offshore structural response by an efficient time simulation technique. Ships and Offshore Structures, 11 (3). pp. 286-299. ISSN 1744-5302

Abu Husain, M. K. and Mohd. Zaki, N. I. and Johari, M. B. and Najafian, G. (2016) Extreme response prediction for fixed offshore structures by Monte Carlo time simulation technique. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2015) The accuracy and efficiency of the efficient time simulation procedure in derivation of the 100-year responses. In: 6th International Conference on Computational Methods in Marine Engineering, MARINE 2015, 15 - 17 June 2015, Rome, Italy.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2016) The effect of different methods of simulating wave induced water particle kinematics on the 100-year responses. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2019) Efficient time simulation method for predicting the 100-year extreme responses of an offshore platform. Ships and Offshore Structures, 14 (sup1). pp. 401-409. ISSN 1744-5302

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2017) Various methods of simulating wave kinematics on the structural members of 100-year responses. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3256-3273. ISSN 2289-4659

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Che Husin, Siti Mahirah and Mukhlas, Nurul ‘Azizah and Ahmad, Robiah and Adanan, Aina Farhanah and Ahmad Sukri, Ikmal Alif and Abu Husain, Nurulakmar (2020) Wave energy converter using electromagnetic induction. International Journal Of Advanced Research In Engineering And Technology, 11 (9). pp. 860-875. ISSN 0976-6480

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Najafian, Gholamhossein (2017) Prediction of offshore structural response extreme values by three different approaches of efficient time simulation technique. Ships and Offshore Structures, 12 (2). pp. 290-301. ISSN 1744-5302

Abu Toalib, Abu Toalib and Ahmad, Robiah and Ahmad, Norulhusna (2020) Optimal design of off-grid hybrid renewable energy system for electrification of One Fathom Bank Malaysia. In: 8th IEEE R10 Humanitarian Technology Conference, R10-HTC 2020, 1 - 3 December 2020, Kuching, Sarawak.

Abu-Bakar, S. H. and Muhammad-Sukki, F. and Freier, D. and Ramirez-Iniguez, R. and Mallick, T. K. and Munir, A. B. and Yasin, S. H. M. and Mas'Ud, A. A. and Abu-Bakar, S. S. and Bani, N. A. and Muhtazaruddin, M. N. (2017) Potential of implementing the low concentration photovoltaic systems in the United Kingdom. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1398-1405. ISSN 2088-8708

Abubakar, Mu'Azu and Aliyu, Abubakar Baba and Ahmad, Norhayati (2015) Flexural strength analysis of dense and porous sintered clay using weibull probability distribution. In: Applied Mechanics and Materials, 2015.

Abubakar, N. and Abdullah, R. and Hong, A. K. B. and Yassin, M. S. (2017) Modified approach for transverse reinforcement design of bridge deck slab on prestressed concrete T-beam girders. International Journal of Civil Engineering and Technology, 8 (8). pp. 1239-1246. ISSN 0976-6308

Abubakar, Sabiran and Arsad, Norhana and Ehsan, Abang Annuar and Hamzah, Azura and Ariffin, Nur Hazliza and Ab-Rahman, Mohammad Syuhaimi (2019) Performance analysis of disposable flow cell for nitrite detection. IEEE Access, 7 . pp. 146024-146036. ISSN 2169-3536

Abubakar Mas’ud, Abdullahi and Sundaram, Arunachalam and Ardila-Rey, Jorge Alfredo and Schurch, Roger and Muhammad-Sukki, Firdaus and Bani, Nurul Aini (2021) Application of the gaussian mixture model to classify stages of electrical tree growth in epoxy resin. Sensors, 21 (7). p. 2562. ISSN 1424-8220

Abul Hossain, Khandoker and Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Ani, Farid Nasir (2005) Application of commercial grade ammonia liquor in the selective non–catalytic reduction of nox in combusted gas from a diesel burner. Application of commercial grade ammonia liquor in the selective non–catalytic reduction of nox in combusted gas from a diesel burner . pp. 107-118. ISSN 0127-118

Adam, Ismahayati and Ibrahim, Mohd. Haniff and Mohd. Kassim, Norazan and Mohammad, Abu Bakar and Mohd. Supa’at, Abu Sahmah (2008) Design of Arrayed Waveguide Grating (AWG) for DWDM/CWDM applications based on BCB polymer. Elektrika, 10 (2). pp. 18-21. ISSN 0128-4428

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Cumming, P. and Mubin, M. (2016) Evaluation of different time domain peak models using extreme learning machine-based peak detection for EEG signal. SpringerPlus, 5 (1). ISSN 2193-1801

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Cumming, P. and Mubin, M. (2017) Improving EEG signal peak detection using feature weight learning of a neural network with random weights for eye event-related applications. Sadhana - Academy Proceedings in Engineering Sciences, 42 (5). pp. 641-653. ISSN 0256-2499

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Mubin, M. (2016) Evaluation of different peak models of eye blink EEG for signal peak detection using artificial neural network. Neural Network World, 26 (1). pp. 67-89. ISSN 1210-0552

Adam, A. and Ramlan, N. A. and Jaharudin, N. F. and Hamzah, H. and Othman, M. F. and Mrwan, A. A. G. (2017) Analysis of combustion characteristics, engine performance and exhaust emissions of diesel engine fueled with upgraded waste source fuel. International Journal of Hydrogen Energy, 42 (28). pp. 17993-18004. ISSN 0360-3199

Adam, Asrul and Mokhtar, Norrima and Mubin, Marizan and Ibrahim, Zuwairie and Shapiai @ Abd. Razak, Mohd. Ibrahim (2015) Dingle's model-based EEG peak detection using a rule-based classifier. In: The International Conference on Artificial Life and Robotics 2015 (ICAROB 2015) 20th Arob Anniversary, 10-12 Jan, 2015, Japan.

Adam, I. and M. Yasin, M. N. and Soh, P. J. and Kamardin, K. and Jamlos, M. F. and Lago, H. and Razalli, M. S. (2017) A simple wideband electromagnetically fed circular polarized antenna for energy harvesting. Microwave and Optical Technology Letters, 59 (9). pp. 2390-2397. ISSN 0895-2477

Adam, Mohamad Zulkefli and Shafie, Noraimi and Abas, Hafiza and Azizan, Azizul (2021) Analysis of momentous fragmentary formants in Talaqi-like neoteric assessment of Quran recitation using MFCC miniature features of Quranic syllables. International Journal of Advanced Computer Science and Applications, 12 (9). pp. 533-540. ISSN 2158-107X

Adbull Hamed, Haza Nuzly and Kasabov, Nikola and Michlovsky, Zbynek and Shamsuddin, Siti Mariyam (2009) String pattern recognition using evolving spiking neural networks and quantum inspired particle swarm optimization. In: Neural Information Processing: 16th International Conference, ICONIP 2009, Bangkok, Thailand, December 1-5, 2009, Proceedings, Part II. Lecture Notes in Computer Science . Springer, Berlin/ Heidelberg, pp. 611-619. ISBN 978-3-642-10682-8

Addrus, Asrulnizam and Hamzah, H. S. and Mohdali, Raihana and Haron, Habibah @ Norehan (2015) Preliminary strategic review to the Malaysian automotive industry. In: International Conference on Engineering Business Management 2015, 22-23 August, 2015, Kuala Lumpur, Malaysia.

Adediran, A. O. and Mohd. Ali, H. (2019) Unleashing the potentials of housing affordability among the Nigeria low-middle income groups. International Journal of Scientific and Technology Research, 8 (7). ISSN 2277-8616

Adela, Hana and Jasmi, Kamarul Azmi and Basiron, Bushrah and Huda, Miftachul and Maseleno, Andino (2018) Selection of Dancer Member Using Simple Additive Weighting. International Journal of Engineering & Technology, 7 (3). pp. 1096-1107. ISSN 2227-524X

Adesipo, Adegbite and Fadeyi, Oluwaseun and Kuca, Kamil and Krejcar, Ondrej and Maresova, Petra and Selamat, Ali and Adenola, Mayowa (2020) Smart and climate-smart agricultural trends as core aspects of smart village functions. Sensors (Switzerland), 20 (21). pp. 1-22. ISSN 1424-8220

Adiputra, D. and Mazlan, S. A. and Zamzuri, H. and Rahman, M. A. A. (2016) Development of controller for Passive Control Ankle Foot Orthoses (PICAFO) based on Electromyography (EMG) signal and angle. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Sunan HotelSurakarta; Indonesia.

Adli, Reza Ghaffari and Kianvash, Abbas and Hossein, Mir Ghasem and Hajalilou, Abdollah and Abouzari-Lotf, Ebrahim (2018) Mechanochemically synthesized NiCo2O4/Vulcan/PANI nanocomposite and investigation of its electrochemical behavior as a supercapacitor. Ceramics International, 44 (16). pp. 20049-20057. ISSN 0272-8842

Adnan, Noorazlina (2009) Flame retardancy and mechanical properties of poegmah compatibilized rice husk filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Adzlan, Ahmad and Mat Ali, Mohamed Sukri and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki (2021) Temporal evolution of lift in a pure cruciform system for energy harvesting. Ocean Engineering223, Ocean . p. 108648. ISSN 0029-8018

Affandi, Syafiq and Bidin, Noriah (2015) Pulse laser ablation in liquid induce gold nanoparticle production. Jurnal Teknologi, 74 (8). pp. 41-43. ISSN 0127-9696

Afolabi, H. K. and Nasef, M. M. and Sapiaa, N. A. H. and Harun, N. Y. and Teo, M. T. and Teh, T. H. (2021) Highly boron-selective adsorbent by radiation induced grafting of n-vinylformamide on polyethylene/polypropylene sheet followed by hydrolysis and glycidol treatment. Radiation Physics and Chemistry, 182 . ISSN 0969-

Afolabi, H. K. and Nordin, N. A. H. and Nasef, M. M. and Harun, N. Y. and Ting, T. M. and Saeed, A. A. H. (2021) Isotherms for adsorption of boron onto new fibrous adsorbent containing glycidol ligands: linear and nonlinear regression methods. In: 3rd International Conference on Tropical Resources and Sustainable Sciences, CTReSS 2021, 14 July 2021 - 15 July 2021, Kelantan, Virtual.

Afzali, A. and Rashid, M. and Afzali, M. and Younesi, V. (2017) Prediction of air pollutants concentrations from multiple sources using AERMOD coupled with WRF prognostic model. Journal of Cleaner Production, 166 . pp. 1216-1225. ISSN 0959-6526

Agani, N. and Abu Bakar, Syed Abdul Rahman and Sheikh Salleh, Sheikh Hussain (2007) Application of texture analysis in echocardiography images for myocardial infarction tissue. Jurnal Teknologi (46D). pp. 61-76. ISSN 2180-3722

Aghabababaeyan, Reza (2015) A robust against rotation attack watermarking technique based on wavelet transform. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Mubarak, Nabisab Mujawar and Khalid, Mohammad and Pudza, Musa Yahaya and Agudosi, Ngozi Patricia and Abutu, Enemona David (2018) Pilot study of in-line continuous flocculation water treatment plant. Journal of Environmental Chemical Engineering, 6 (6). pp. 7185-7191. ISSN 2213-3437

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Numan, Arshid and Mohammad Khalid, Mohammad Khalid and Mubarak, Nabisab Mujawar and Aid, Siti Rahmah and Omar, Nurizan (2021) Optimising the fabrication of 3D binder-free graphene electrode for electrochemical energy storage application. Surface and Coatings Technology, 413 . p. 127080. ISSN 0257-8972

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Numan, Arshid and Mohammad Khalid, Mohammad Khalid and Mubarak, Nabisab Mujawar and Benages-Vilau, Raúl and Gómez-Romero, Pedro and Aid, Siti Rahmah and Omar, Nurizan (2021) Optimisation of NiO electrodeposition on 3D graphene electrode for electrochemical energy storage using response surface methodology. Journal of Electroanalytical Chemistry, 882 . p. 114992. ISSN 1572-6657

Agudosi, Elochukwu Stephen and Abdullah, Ezzat Chan and Numan, Arshid and Mubarak, Nabisab Mujawar and Khalid, Mohammad and Omar, Nurizan (2020) A review of the graphene synthesis routes and its applications in electrochemical energy storage. Critical Reviews in Solid State and Materials Sciences, 45 (5). pp. 339-377. ISSN 1040-8436

Ahamad Bahtiar, Rahayu (2004) IT application in commercial education : Developing virtual Tuition Centre. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Ahammed, S. J. and Chung, E. S. and Shahid, S. (2018) Parametric assessment of pre-monsoon agricultural water scarcity in Bangladesh. Sustainability (Switzerland), 10 (3). ISSN 2071-1050

Aharizad, Nezhla (2011) Multidimensional deformation analysis with linear and non-linear Kalman filter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad, Arshad (1988) Penggunaan komputer di dalam teknologi penapaian. Buletin FKKKSA, 2 (1). pp. 25-28. ISSN 0128-0740

Ahmad, Arshad and Abdul Samad, Nor Asma Fazli and Chow, Ai Wei (2003) Mathematical modeling and analysis of dynamic behaviour of a fed-batch penicilin G fermentation process. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 387-394.

Ahmad, Arshad and Chen, Wah Sit (2003) Improving robustness of artificial neural networks model using genetic algorithm. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 793-800.

Ahmad, Arshad and Ibrahim, Norazana (2003) Simulation and sensitivity analysis of autothermal reforming (ATR) for mobile fuel cell application. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 876-882.

Ahmad, Arshad and Lim, Wan Piang (2003) Development of a robust hybrid estimator using partial least squares regression and artificial neural networks. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 780-787.

Ahmad, Arshad and Ramli, Ahmad Raoof (2003) Dynamic behaviour and sensitivity analysis of 5kW PEMFC stack simulation. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 867-874.

Ahmad, M. A. and Mohamed, Z. and Ismail, Z. H. (2008) Experimental investigation of feedforward control schemes of a flexible robot manipulator system. Elektrika, 10 (2). pp. 28-35. ISSN 0128-4428

Ahmad, Afham Zulhusmi and Abu, Aminudin and Lee, Kee Quen and Othman, Nor A’zizi and Che In, Faridah (2019) Numerical modelling of multiple tuned mass damper equipped with magneto rheological damper for attenuation of building seismic responses. Jurnal Teknologi, 81 (6). pp. 103-113. ISSN 2180-3722

Ahmad, Anuar and Adnan, Nur Azhani (2008) Digital photogrammetry: comparison of digital orthophoto based on different dataset of digital images of aerial photograph. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Ahmad, F. and Harun, S. W. and Nor, R. M. and Ahmad, H. and Ibrahim, M. H. (2016) Soliton pulse generation using a swcntspolyvinyl alcohol thin film based passive saturable absorber. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6324-6327. ISSN 1819-6608

Ahmad, Fadzilah and Mohamad, Dzulkifli (2009) Fingerprint classification based on analysis of singularities and image quality. In: Visual Informatics: Bridging Research and Practice. Springer, Berlin/ Heidelberg, pp. 551-560. ISBN 978-3-642-05035-0

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishammudin and Aparow, Vimal Rau and Yunos, M. (2018) Simulation and experimental investigation of vehicle braking system employing a fixed caliper based electronic wedge brake. Simulation, 94 (4). pp. 327-340. ISSN 0037-5497

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd. Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling and control of a fixed calliper-based electronic wedge brake. Strojniski Vestnik - Journal of Mechanical Engineering, 63 (3). pp. 181-190. ISSN 0039-2480

Ahmad, Hafed Qasem and Kamaruddin, Samira A. and Agha, Omar M. A. Mahmood and Harun, Sobri B. and Zaaboul, Rashyd (2020) A review of meteorological drought based indices towards integrated water resources management in Iraq. Journal Of Computational and Theoretical Nanoscience, 17 (3). pp. 663-672. ISSN 1546-1955

Ahmad, Imran and Chelliapan, Shreeshivadasan and Othman, Norazli and Mohammad, Roslina and Kamaruddin, Samira Albati (2018) A review of Municipal Solid Waste (MSW) landfill management and treatment of leachate. International Journal of Civil Engineering and Technology, 9 (5). pp. 336-348. ISSN 0976-6308

Ahmad, M. N. and Mahmood, A. K. and Hashim, K. F. and Mustakim, F. and Selamat, Ali and Bajuri, M. Y. and Arshad, N. I. (2021) Artificial intelligence model and correlation for characterization and viscosity measurements of mono & hybrid nanofluids concerned graphene oxide/silica. Journal of Thermal Analysis and Calorimetry, 145 (4). pp. 2209-2224. ISSN 1388-6150

Ahmad, Mazatusziha (2006) Mechanical properties of rice husk filled impact modified unplasticised poly(vinyl chloride) composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ahmad, Mohamad Azrin and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Hasannuddin, A. K. and Abu Bakar, Muhammad Aiman and Abd. Fatah, Abdul Yasser and Che Sidik, Nor Azwadi and Noge, Hirofumi (2018) Combustion performance and exhaust emissions fuelled with non-surfactant water-in-diesel emulsion fuel made from different water sources. Environmental Science and Pollution Research, 24 (24). pp. 24266-24280. ISSN 0944-1344

Ahmad, Mohd. Zamani (2006) The application of fuzzy expert system to preliminary development planning of medium size container terminal. PhD thesis, Universiti Teknologi Malaysia, Business Advances Technology Centre.

Ahmad, N. A. and Mohd. Drus, S. and Abu Bakar, N. A. (2019) Moderating effect of organisation size in measuring the technology organisation environment and pressure (TOEP) in enterprise architecture adoption. Journal of Theoretical and Applied Information Technology, 97 (14). ISSN 1992-8645

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. (2017) The concept of using reflexivity theory to examine the perception of sustainable efforts towards event greening. Advanced Science Letters, 23 (11). pp. 10883-10886. ISSN 1936-6612

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. and Ong, M. H. A. (2017) The mediating effect of personal norms towards the relationship of values and perception of event greening efforts. Advanced Science Letters, 23 (11). pp. 10891-10894. ISSN 1936-6612

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. and Ong, M. H. A. and Asri, A. S. M. (2017) Examining the perception of attendees on sustainable efforts towards event greening using the values, beliefs and norms theory. Advanced Science Letters, 23 (11). pp. 10748-10752. ISSN 1936-6612

Ahmad, N. L. and Mahmood, N. H. N. and Rashid, W. E. W. and Yunus, N. A. M. and Zamzuri, N. H. and Ong, M. H. A. (2017) The effect of values on the perception of sustainable efforts towards event greening. Advanced Science Letters, 23 (11). pp. 10878-10882. ISSN 1936-6612

Ahmad, N. L. and Rashid, W. E. W. and Yunus, N. A. M. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Examining the demand for green events to promote sustainable practices in tourism: a concept paper. Advanced Science Letters, 22 (5-6). pp. 1402-1405. ISSN 1936-6612

Ahmad, N. L. and Rashid, W. E. W. and Yunus, N. A. M. and Mahmood, N. H. N. and Shamsuddin, S. (2017) Perception of sustainable efforts towards event greening. Advanced Science Letters, 23 (4). pp. 3237-3240. ISSN 1936-6612

Ahmad, N. L. and Yunus, N. A. M. and Rashid, W. E. W. and Zamzuri, N. H. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Theorizing event attendees behavior to increase the demand for sustainable events. International Business Management, 10 (17). pp. 3853-3859. ISSN 1993-5250

Ahmad, N. H. and Inagaki, A. and Kanda, M. and Onodera, N. and Aoki, T. (2017) Large-eddy simulation of the gust index in an urban area using the lattice boltzmann method. Boundary-Layer Meteorology, 163 (3). pp. 447-467. ISSN 0006-8314

Ahmad, Nurul Fariha and Komatsu, Katsuyoshi and Iwasaki, Takuya and Watanabe, Kenji and Taniguchi, Takashi and Mizuta, Hiroshi and Wakayama, Yutaka and Hashim, Abdul Manaf and Morita, Yoshifumi and Moriyama, Satoshi and Nakaharai, Shu (2019) Fabry–Pérot resonances and a crossover to the quantum hall regime in ballistic graphene quantum point contacts. Scientific Reports, 9 (3031). ISSN 2045-2322

Ahmad, Nurul Huda (2016) Large eddy simulation of the gust index over a realistic urban area. Masters thesis, Department of International Development Engineering Graduate School of Science and Engineering.

Ahmad, Robiah and Mohd. Samsuri, Saiful Farhan and Zakaria, Mohd. Zakimi (2012) Evapotranspiration prediction using system identification and genetic algorithm. In: The 31st IASTED Asian Conference on Modelling, Identification and Control, AsiaMIC 2012, 2-4 Apr 2012, Phuket, Thailand.

Ahmad, S. and Asmai, S. A. and Zaid, S. Z. and Kama, N. (2019) Shopping assistant app for people with visual impairment: an acceptance evaluation. International Journal of Computing, 18 (3). pp. 285-292. ISSN 1727-6209

Ahmad, S. Z. A. S. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Mohd., M. H. (2019) Offshore responses using an efficient time simulation regression procedure. In: 7th International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Ahmad, Salman and Mat Tahar, Razman and Muhammad-Sukki, Firdaus and Munir, Abu Bakar and Abdul Rahim, Ruzairi (2015) Role of feed-in tariff policy in promoting solar photovoltaic investments in Malaysia: a system dynamics approach. Energy, 84 . pp. 808-815. ISSN 0360-5442

Ahmad, Sufizar and Muhamad, Norhamidi A. and Muchtar, Andanastuti and Sahari, Jaafar and Ibrahim, Mohd. Halim Irwan and Jamaludin, Khairul Rijal and Mohamad Nor, N. H. (2010) Development and characterization of titanium alloy foams. International Journal of Mechanical and Materials Engineering, 5 (2). 244 - 250. ISSN 1823-0334

Ahmad, Yahaya and Yahya, Wira Jazair and Abu Kassim, Khairil Anwar and Koetniyom, Saiprasit and Carmai, Julaluk and Abd. Kadir, Hasannuddina (2019) Driver head kinematic analysis under frontal offset collision during the rebound phase. International Journal of Crashworthiness, 24 (6). pp. 606-614. ISSN 1358-8265

Ahmad, Z. and Thambiratnam, D. (2009) Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading. Computers & Structures, 87 (3-4). pp. 186-197. ISSN 00457949

Ahmad Fadzillah, Nurrulhidayah and Mohd. Sukri, Siti Jamilah and Mat Jubri, Mustafa and Abd. Mutalib, Sahilah and Rosman, Arieff Salleh and Abdul Rohman, Abdul Rohman and Ramli, Mohd. Anuar and Kurt, Nurullah (2020) Islamic and modern science perspectives issues of animal plasma as a source of food additives in food products. International Journal of Advanced Research in Engineering and Technology, 11 (12). pp. 283-305. ISSN 0976-6499

Ahmad Khairi, M. H. and Mazlan, S. A. and Ubaidillaha, U. and Ku Ahmad, K. Z. and Choi, S. B. and Abdul Aziz, S. A. and Yunus, N. A. (2017) The field-dependent complex modulus of magnetorheological elastomers consisting of sucrose acetate isobutyrate ester. Journal of Intelligent Material Systems and Structures, 28 (14). pp. 1993-2004. ISSN 1045-389X

Ahmad Khairi, Muntaz Hana and Abd. Fatah, Abdul Yasser and Mazlan, Saiful Amri and Ubaidillah, U. and Nordin, Nur Azmah and Nik Ismail, Nik Intan and Choi, Seung Bok and Abdul Aziz, Siti Aishah (2019) Enhancement of particle alignment using silicone oil plasticizer and its effects on the field-dependent properties of magnetorheological elastomers. International Journal of Molecular Sciences, 20 (17). p. 4085. ISSN 1661-6596

Ahmad Masudi, Ahmad Masudi and Che Jusoh, Nurfatehah Wahyuny and Oki, Muraza (2020) Recent progress on low rank coal conversion to dimethyl ether as clean fuel: A critical review. Journal of Cleaner Production, 27720 . p. 124024. ISSN 0959-6526

Ahmad Nasruddin, Mohd. Hasif and Hassan, Muhammad Imzan and Abdul Rahman, Alias (2008) Developing 3D cadastre registration system. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Ahmad Nazri, M. N. and Ismail, Z. H. and Yusof, R. (2016) Fault detection and diagnosis using cubature Kalman filter for nonlinear process systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 63-67. ISSN 2180-1843

Ahmad Sabri, N. S. and Mohd. Mohsi, N. A. F. and Apandi, A. and Yusof, N. and Megat Mohd. Noor, M. J. and Md. Akhir, F. N. and Sugiura, N. and Utsumi, M. and Othman, N. and Zakaria, Z. and Hara, H. (2021) Draft genome sequence of the prazosin-degrading bacillus sp. Strain pr5, isolated from a river receiving hospital and urban wastewater in Malaysia. Microbiology Resource Announcements, 10 (11). ISSN 2576-098X

Ahmad Saufi, Roselina and Mahinder Singh, Harcharanjit Singh and Kakar, Abdul Samad (2018) Understanding linkage between human resource management practices and intention to leave: a moderated-mediation conceptual model. In: 2018 International Conference on Information Management and Management Science, IMMS 2018, 25 August 2018 - 27 August 2018, Southwest Jiaotong UniversityChengdu, China.

Ahmad Shakri, Md. Rajuna and Zakaria, Rozana and Yahya, Khairulzan and Abd. Samad, Badrul Hisham and Md. Tarekh, Noor Aliza (2012) The sources and factors of tuberculosis transmission at hospital for sustainable indoor air. International Journal of Environmental Protection, 2 (3). pp. 29-32. ISSN 2226-6437

Ahmad Sharif, Mohd Nazir and Mohamad, Kamaruddin Malik and Alias, Rose Alinda and Shahibudin, Shamsul and Zakaria, Nor Hidayati (2004) Knowledge management (KM) framework for representing lessons learned system for communities of practice in institutions of higher learning. Malaysian Journal of Computer Science, 17 (1). pp. 1-12.

Ahmad Sharif, Noor Fadzliana (2012) Preparation and characterization of epoxidized natural rubber (ENR-50) toughened polyamide 6/ halloysite nanotube composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad Tarmizi, Azmil Haizam and Md. Illias, Rosli and Md. Salleh, Madihah and Hassan, Osman and Kamaruddin, Kamarulzaman and Abdul Rahman, Roshanida and Abdul Aziz, Suriani (2003) Production of cyclodextrin glucanotransferase (CGTase) from Bacillus sp. TS1-1: process optimisation. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 236-239.

Ahmad Tarmizi, Siti Maisarah and Zamri, Muhammad Amin and Nordin, Nur Azmah and Mohd. Rosnan, Rizuan and Mazlan, Saiful Amri and Yahaya, Hafizal and Abdul Aziz, Siti Aishah (2020) Effect of high sintering temperature on the cobalt ferrite synthesized via co-precipitation method. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Ahmad, Anuar (1994) Small Format Photography For Architectural Photogrammetry : A Review. Buletin Ukur, 5 (1). pp. 42-52. ISSN 0128-4274

Ahmad, Arshad (1991) Designing a CIP system. Buletin FKKKSA, 5 (1). pp. 1-4. ISSN 0128-0740

Ahmad, Arshad (1991) Perancangan, penjadualan dan kawalan dalam sistem proses berkelompok. Buletin FKKKSA, 5 (1). pp. 5-13. ISSN 0128-0740

Ahmad, Arshad (1995) Process identification using artificial neural network. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C3-1.

Ahmad, Arshad and Jones, Meirion G (1989) Microcomputer application in measurement and control of fermentation process. Proceedings of The Fifth Symposium of Malaysian Chemical Engineers . pp. 287-296.

Ahmad, Arshad and Ling, Leong Yau (2001) Effect of heat integration on dynamic of a palm-oil fractionation process. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 152-158.

Ahmad, Arshad and Wong, Teck Siang (2001) Neural network inferential estimator for product composition of a fatty acid distillation column. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 191-196.

Ahmad, Baharin (1994) Three-Dimensional Coordinate Determination By Close Range Photogrammetric Method: An Experiment Using Contax RTS 1/1. Buletin Ukur, 5 (2). pp. 135-144. ISSN 0128-4274

Ahmad, Supian (2002) Satu kajian mengenai pengunaan teleworking di Malaysia: kajian kes, metropolitan Klang Valley. Project Report. UTM. (Unpublished)

Ahmadi, Ahmadreza (2012) Optimization of the self-tuning PID type fuzzy logic controller using ICA for the X inverted pendulum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmadpoor Samani, S. and Zaleha Abdul Rasid, S. and Sofian, S. (2017) The effect of open-plan workspaces on behavior and performance among Malaysian creative workers. Global Business and Organizational Excellence, 36 (3). pp. 42-52. ISSN 1932-2054

Ahmed, A. M. and Hashim, A. H. A. and Hassan, W. H. (2015) Investigation of gateway placement optimization approaches in wireless mesh networks using genetic algorithms. In: 5th International Conference on Computer and Communication Engineering, ICCCE 2014, 23 - 24 September 2014, Kuala Lumpur, Malaysia.

Ahmed, Adel Ali and Fisal, Norsheila (2008) A real-time routing protocol with load distribution in wireless sensor networks. Computer Communications , 31 . 3190-3203 . ISSN 0140-3664

Ahmed, F. and Al Amin, A. Q. and Mohamad, Z. F. and Chenayah, S. (2016) Agriculture and food security challenge of climate change: a dynamic analysis for policy selection. Scientia Agricola, 73 (4). pp. 311-321. ISSN 0103-9016

Ahmed, Irfanuddin Shafi and Kamardin, Kamilia and Yamada, Yoshihide and Noureen, Taj R. and Idris, Izni Husna and Mad Kaidi, Hazilah and Bani, Nurul Aini and Mohd. Sam, Suriani (2020) IoT enabled wireless health monitoring system using textile antenna. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2019, 25 November 2019 - 27 November 2019, Melaka, Malaysia.

Ahmed, Mohamed Tahir and Mohd. Amin, Shamsudin (2015) Comparison of face recognition algorithms for human-robot interactions. Jurnal Teknologi, 72 . pp. 73-78. ISSN 0127-9696

Ahmed Al-Othman, Ahmed Basel (2011) Segmentation of mri medical image using region growing method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmed Almhab, Ayoub and Busu, Ibrahim (2008) Estimation of evapotranspiration with modified SEBAL model using Landsat-TM and NOAA-AVHRR images in arid mountains area. In: Proceedings - 2nd Asia International Conference on Modelling and Simulation, AMS 2008. Institute of Electrical and Electronics Engineers, New York, 350-355 . ISBN 978-076953136-6

Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Tan, Yie Hua and Karri, Rama Rao and Mohammad Khalid, Mohammad Khalid and Walvekar, Rashmi and Abdullah, Ezzat Chan and Mazari, Shaukat Ali and Nizamuddin, Sabzoi (2020) Magnetic nanoparticles incorporation into different substrates for dyes and heavy metals removal—A Review. Environmental Science and Pollution Research, 27 (35). pp. 43526-43541. ISSN 0944-1344

Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Tan, Yie Hua and Mohammad Khalid, Mohammad Khalid and Karri, Rama Rao and Walvekar, Rashmi and Abdullah, Ezzat Chan and Nizamuddin, Sabzoi and Mazari, Shaukat Ali (2021) A comprehensive review on magnetic carbon nanotubes and carbon nanotube-based buckypaper for removal of heavy metals and dyes. Journal of Hazardous Materials, 413 . p. 125375. ISSN 0304-3894

Ahmed Mahrous, Samar and Che Sidik, Nor Azwadi and Saqr, Khalid Mansour (2020) Investigation of Newtonian and power-law blood flow models in a 180°curved pipe at low to medium shear rate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 148-162. ISSN 2289-7879

AI - Amin, Abul Quasem and V. Rasiah, Rajah Ratneswary and Chenayah, Santha (2015) Prioritizing climate change mitigation: an assessment using Malaysia to reduce carbon emissions in future. Environmental Science and Policy, 50 . pp. 24-33. ISSN 1462-9011

Aichouni, Ahmed Baha Eddine and Abdullah, Haslaile and Ramlie, Faizir (2021) A scientific approach of using the DMAIC methodology to investigate the effect of cutting tool life on product quality and process economics. Engineering Technology & Applied Science Research, 11 (1). pp. 6799-6805. ISSN 2241-4487

Aid, S. R. and Uneme, T. and Wakabayashi, N. and Yamazaki, K. and Uedono, A. and Matsumoto, S. (2017) Carrier activation in Mg implanted GaN by short wavelength Nd:YAG laser thermal annealing. Physica Status Solidi (A) Applications and Materials Science, 214 (10). ISSN 1862-6300

Aid, Siti Rahmah and Mohd. Rashid, Nur Nadhirah and Jonny, Nur Farhana Arissa and Centeno, Anthony and Ikenoue, Hiroshi (2020) Preliminary study on laser annealed NP junction in phosphorus implanted germanium. In: 14th IEEE International Conference on Semiconductor Electronics, ICSE 2020, 28 - 29 July 2020, Kuala Lumpur, Malaysia.

Akhtar, T. and Zahir, A. and Tareq, M. A. H. and Mahdzir, A. M. (2017) The key motivating factors of employee retention: a resource based view. Prabandhan: Indian Journal of Management, 10 (4). pp. 33-48. ISSN 0975-2854

Akhtar, Tahir and Tareq, Mohammad Ali and Prima Sakti, Muhammad Rizky and Ahmad Khan, Adnan (2018) Corporate governance and cash holdings: the way forward. Qualitative Research in Financial Markets, 10 (2). pp. 152-170. ISSN 1755-4179

Akhtar, Tahir and Tareq, Mohammad Ali and Rashid, Kashif (2020) Chief Executive Officers’ monitoring, board effectiveness, managerial ownership, and cash holdings: evidence from ASEAN. Review of Managerial Science . ISSN 1863-6683

Akinyode, Babatunde Femi and Khan, Tareefhayat and Ahmad, Abdullah Sani (2015) Socio-economic factors in measuring the demand for residential neighbourhood in Nigeria. Asian Social Science, 11 (12). pp. 235-247. ISSN 1911-2017

Akmal Yusof, Siti Nurul and Asako, Yutaka and Faghri, Mohammad and Tan, Lit Ken and Che Sidik, Nor Azwadi and Aziz Japar, Wan Mohd. Arif (2019) Numerical analysis for irreversible processes in a piston-cylinder system. International Journal of Heat and Mass Transfer, 136 . pp. 730-739. ISSN 0017-9310

Akmal Yusof, Siti Nurul and Asako, Yutaka and Tan, Lit Ken and Che Sidik, Nor Azwadi (2018) Piston surface pressure of piston- cylinder system with finite piston speed. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 55-65. ISSN 2289-7879

Akter, A. and Goto, M. and Noor, M. J. M. M. and Muzahidul Islam, A. K. M. and Motoo, U. and Ya, Z. Z. and Parvez, A. (2017) Immobilization of heavy metals in tannery sludge by subcritical water treatment. Chemical Engineering Transactions, 56 . pp. 265-270. ISSN 2283-9216

Al Amin, A. Q. and Alam, G. M. (2016) Impact of El-Ni\xF1o on agro-economics in Malaysia and the surrounding regions: An analysis of the events from 1997-98. Asian Journal of Earth Sciences, 9 (1). pp. 1-8. ISSN 1819-1886

Al Amin, A. Q. and Ambrose, A. F. and Masud, M. M. and Azam, M. N. (2016) People purchase intention towards hydrogen fuel cell vehicles: An experiential enquiry in Malaysia. International Journal of Hydrogen Energy, 41 (4). pp. 2117-2127. ISSN 0360-3199

Al Amoodi, Tareq Omar (2012) Rain attenuation time series synthesizer for satellite link in tropical/equatorial region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al Madhoun, W. A. and Ramli, N. A. and Yahaya, A. S. and Rashid, M. (2016) Temporal distribution of non-methane hydrocarbon (NMHC) in a developing equatorial island. Air Quality, Atmosphere and Health, 9 (3). pp. 303-310. ISSN 1873-9318

Al Mamoon, I. and Muzahidul Islam, A. K. M. and Ahmed, A. and Baharun, S. and Komaki, S. (2017) Priority aware cognitive radio driven hospital system. Wireless Personal Communications, 96 (4). pp. 5973-5994. ISSN 0929-6212

Al Mayahi, Hala Taleb and Ismail, Syuhaida and Wahab, Mohammad Hussaini and Wan Mohd. Rani, Wan Nurul Mardiah and Che Amat, Rohayah (2018) Architectural practices of project communication management in Iraq. Planning Malaysia, 16 (1). pp. 1-14. ISSN 1675-6215

Al Shamsi, Sulaiman and Ahmad, Anuar (2008) Critical successful factors analysis for national data infrastructure implementation. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Al-Aghbari, Anas and Ithnin, Norafida and Ibrahim, Othman and Saeed, Faisal (2015) Physical security framework for power plants in Yemen. Jurnal Teknologi, 73 (2). pp. 123-131. ISSN 0127-9696

Al-araibi, A. A. M. and Mahrin, M. N. and Yusoff, R. C. M. and Chuprat, S. B. (2019) A model for technological aspect of e-learning readiness in higher education. Education and Information Technologies, 24 (2). pp. 1395-1431. ISSN 1360-2357

Al-Bared, M. A. M. and Harahap, I. S. H. and Marto, A. (2018) Sustainable strength improvement of soft clay stabilized with two sizes of recycled additive. International Journal of GEOMATE, 5 (51). pp. 39-46. ISSN 2186-2982

Al-Bared, M. A. M. and Harahap, I. S. H. and Marto, A. and Mohamad, H. and Abad, S. V. A. N. K. and Mustaffa, Z. (2020) Cyclic behavior of RT-cement treated marine clay subjected to low and high loading frequencies. Geomechanics And Engineering, 21 (5). pp. 433-445.

AL-Hadi, Ismail Ahmed A. and Shamsuddin, Siti Mariyam and Hashim, Siti Zaiton (2011) Bacterial foraging optimization algorithm for neural network learning enhancement. In: Eleventh International Conference On Hybrid Intelligent System.

Al-Hashedi, Khaled Gubran and Magalingam, Pritheega (2021) Financial fraud detection applying data mining techniques: A comprehensive review from 2009 to 2019. Computer Science Review, 40 . ISSN 1574-0137

Al-jaboriy, Saif S. and Sjarif, Nilam Nur Amir and Chuprat, Suriayati and Abduallah, Wafaa Mustafa (2019) Acute lymphoblastic leukemia segmentation using local pixel information. Pattern Recognition Letters, 125 . pp. 85-90. ISSN 0167-8655

Al-Masoodi, A. H. H. and Ahmad, F. and Ahmed, M. H. M. and Arof, H. and Harun, S. W. (2017) Q-switched ytterbium-doped fiber laser with topological insulator-based saturable absorber. Optical Engineering, 56 (5). ISSN 0091-3286

Al-Masoodi, Ahmed H. H. and Ahmad, Fauzan and Ahmed, Mahmoud H. M. and Al-Masoodi, Abtisam H. H. and Alani, Ibrahim A. M. and Arof, Hamzah and Wadi Harun, Sulaiman (2018) Q-switched and mode-locked ytterbiumdoped fibre lasers with Sb2Te3 topological insulator saturable absorber. IET Optoelectronics, 12 (4). pp. 180-184. ISSN 1751-8768

Al-Qaim, F. F. and Mussa, Z. H. and Yuzir, A. and Abu Tahrim, N. and Hashim, N. and Azman, S. (2018) Transportation of different therapeutic classes of pharmaceuticals to the surface water, sewage treatment plant, and hospital samples, Malaysia. Water (Switzerland), 10 (7). ISSN 2073-4441

Al-Qaim, F. F. and Yuzir, A. and Mussa, Z. H. (2018) Determination of theobromine and caffeine in some malaysian beverages by liquid chromatography-time-of-flight mass spectrometry. Tropical Journal of Pharmaceutical Research, 17 (3). pp. 529-535. ISSN 1596-5996

Al-Qaim, Fouad F. and Abdullah, Md. P. and Othman, Mohamed R. and Mussa, Zainab H. and Zakaria, Zuriati and Latip, Jalifah and Afiq, Wan M. (2015) Investigation of the environmental transport of human pharmaceuticals to surface water: a case study of persistence of pharmaceuticals in effluent of sewage treatment plants and hospitals in Malaysia. Journal of the Brazilian Chemical Society, 26 (6). pp. 1124-1135. ISSN 0103-5053

Al-Qaim, Fouad Fadhil and Abdullah, Md. Pauzi and Othman, Mohamed Rozali and Zakaria, Zuriati and Latip, Jalifa (2012) Different mobile phases and elution programs were optimized to separate seven basic pharmaceuticals using LC-QTOF/MS. International Journal of Biological, Ecological and Environmental Sciences, 1 (3). pp. 72-76. ISSN 2277-4394

Al-Raqadi, A. M. S. and Abdul Rahim, A. and Masrom, M. and Al-Riyami, B. S. N. (2017) Cooperation and direction as potential components for controlling stress on the perceptions of improving organisation’s performance. International Journal of Systems Assurance Engineering and Management, 8 (1). pp. 327-341. ISSN 9756809

Al-Raqadi, A. M. S. and Abdul Rahim, A. and Masrom, M. and Al-Riyami, B. S. N. (2017) Enhancing transparency and learning sustainability on the perceptions of improving naval ships’ support performance. International Journal of Systems Assurance Engineering and Management, 8 . pp. 265-289. ISSN 9756809

Al-Raqadi, A. M. S. and Abdul Rahim, A. and Masrom, M. and Al-Riyami, B. S. N. (2017) Sustainability of knowledge and competencies management on the perceptions of improving ships’ upkeep performance. International Journal of Systems Assurance Engineering and Management, 8 . pp. 230-246. ISSN 9756809

Al-Raqadi, A. M. S. and Rahim, Abdul A. and Masrom, Maslin and Al-Riyami, B. S. N. (2015) An assistive and research framework methodology for ships’ upkeep and repair organisational learning performance. Asian Social Science, 11 (18). pp. 246-260. ISSN 1911-2017

Al-Shatri, S. H. H. and Murid, A. H. M. and Ismail, M. (2016) Solving robin problems in bounded doubly connected regions via an integral equation with the generalized neumann kernel. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Al-Tabatabaie, Kusay Faisal A. (2013) Local multipoint distribution services architecture based on rain profile extracted from meteorological radar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aladdin, Nur Adilah Liyana (2012) Numerical simulation on three dimensional fluid-structure interaction (FSI) in stenotic artery using adina software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alagapan, P. and Hassan, M. Z. and Ibrahim, M. H. and Daud, M. Y. and Bani, N. A. and Kutty, R. M. (2019) Measurement of hazardous personal noise exposure in spice manufacturing industry. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16-17 July 2018, Johor Bahru, Johor, Malaysia.

Alamoudi, Abdullah and Saaduddin, Syed Muhammad and Munir, Abu Bakar and Muhammad Sukki, Firdaus and Abu Bakar, Siti Hawa and Mohd. Yasin, Siti Hajar and Karim, Ridoan and Bani, Nurul Aini and Abubakar Mas’ud, Abdullahi and Ardila Rey, Jorge Alfredo and Prabhu, Radhakrishna and Sellami, Nazmi (2019) Using static concentrator technology to achieve global energy goal. Sustainability (Switzerland), 11 (11). pp. 1-22. ISSN 2071-1050

Alashwal, Hany Taher Ahmed and Deris, Safaai and Othman, Muhamad Razib (2006) Support vector machines for predicting protein-protein interactions using domains and hydrophobicity features. In: IEEE International Conference on Computing & Informatics (ICOCI'2006), 6-8 June 2006, Kuala Lumpur.

Alatas, I. M. and Kamaruddin, S. A. and Nazir, R. and Irsyam, M. (2016) Effect of weathering on disintegration and shear strength reduction of clay shale. Jurnal Teknologi, 78 (7-3). pp. 93-99. ISSN 0127-9696

Alatas, Idrus M. and Kamaruddin, Samira Albati and Nazir, Ramli and Irsyam, Masyhur and Himawan, Agus (2015) Shear strength degradation of Semarang Bawen clay shale due to weathering process. Jurnal Teknologi, 77 (11). pp. 109-118. ISSN 0127-9696

Alatas, Idrus Muhamad (2017) Kesan luluhawa terhadap kekuatan ricih syal lempung dalam penentuan parameter kestabilan cerun. PhD thesis, Universiti Teknologi Malaysia.

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. (2016) Investigation of the influence of particle size on the migration of DNAPL in unsaturated sand. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2017) Influence of macro-pores on DNAPL migration in double-porosity soil using light transmission visualization method. Transport in Porous Media, 117 (1). pp. 103-123. ISSN 0169-3913

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2017) Quantification of dense nonaqueous phase liquid saturation in double-porosity soil media using a light transmission visualization technique. Journal of Porous Media, 20 (7). pp. 591-606. ISSN 1091-028X

Alazaiza, Motasem Y. D. and Ngien, Su Kong and Bob, Mustafa M. and Kamaruddin, Samira A. and Ishak, Wan Mohd. Faizal (2018) Non-aqueous phase liquids distribution in three-fluid phase systems in double-porosity soil media: Experimental investigation using image analysis. Groundwater for Sustainable Development, 7 . pp. 133-142. ISSN 2352-801X

Alaziaza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2016) Investigation of light non-aqueous phase liquid migration single and double-porosity soil using light transmission visualization method (LTV). In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Alfagi, A. S. and Manaf, A. A. and Hamida, B. A. and Hamza, M. G. (2017) A systematic literature review on necessity, challenges, applications and attacks of watermarking relational database. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-3). pp. 101-108. ISSN 2180-1843

Alghenaim, M. F. and Abu Bakar, N. A. and Mohd. Yusoff, C. F. and Hassan, N. H. and Sallehudin, H. (2021) Employee awareness model to enhance awareness of social engineering threats in the Saudi public sector. In: 2021 International Congress of Advanced Technology and Engineering, ICOTEN 2021, 4 July 2021 - 5 July 2021, Virtual, Online.

Alharbi, Ibrahim Bader A. and Jamil, Rossilah and Nik Mahmood, Nik Hasnaa and Mohamed Shaharoun, Awaluddin (2019) Organizational innovation: a review paper. Open Journal of Business and Management, 7 (3). pp. 1196-1206. ISSN 2329-3292

Ali, Noorhalieza and Slater, M. J. (1991) The effects of mass transfer on drop breakage in rotating disc contactors. In: Second Particulate Technology Conference PARTEC 91, 1991.

Ali, A. A. and Hashim, A. M. (2016) Computational Analysis of the Optical and Charge Transport Properties of Ultrasonic Spray Pyrolysis-Grown Zinc Oxide/Graphene Hybrid Structures. Nanoscale Research Letters, 11 (1). ISSN 1931-7573

Ali, Amgad Ahmed and Hashim, Abdul Manaf (2015) Density functional theory study of atomic layer deposition of zinc oxide on graphene. Nanoscale Research Letters, 10 . p. 299. ISSN 1556-276X

Ali, Dayana Farzeeha and Noordin, Muhammad Khair and Ahmad, Adnan and Shukor, Nurbiha A. and Abd. Halim, Noor Dayana and Abdullah, Abdul Halim and Md. Nasir, Ahmad Nabil and Omar, Marlissa (2015) Effect of virtual environment courseware in learning engineering drawing. In: Innovative Practices in Higher Education Expo 2015 (I-PHEX 2015).

Ali, F. and Amin, M. and Ryu, K. (2016) The role of physical environment, price perceptions, and consumption emotions in developing customer satisfaction in Chinese resort hotels. Journal of Quality Assurance in Hospitality and Tourism, 17 (1). pp. 45-70. ISSN 1528-008X

Ali, F. and Hussain, K. and Omar, R. (2016) Diagnosing customers experience, emotions and satisfaction in Malaysian resort hotels. European Journal of Tourism Research, 12 . pp. 25-40. ISSN 1994-7658

Ali, F. and Zhou, Y. and Hussain, K. and Nair, P. K. and Ragavan, N. A. (2016) Does higher education service quality effect student satisfaction, image and loyalty?: a study of international students in Malaysian public universities. Quality Assurance in Education, 24 (1). pp. 70-94. ISSN 0968-4883

Ali, Jalil and Punthawanunt, S. and Jomtarak, R. and Teeka, C. and Yupapin, P. P. (2011) Single electron-hole pair generation using dark-bright solitons conversion control. In: The 2nd International Science, Social Science, Engineering and Energy Conference 2010 (I-SEEC 2010). Elsevier, pp. 228-230. ISBN 978-073540897-5

Ali, M. A. and Hussin, N. and Abed, I. A. (2019) E-banking fraud detection: a short review. International Journal of Innovation, Creativity and Change, 6 (8). pp. 67-87. ISSN 2201-1315

Ali, M. B. and Hashim, A. H. A. and Hassan, W. H. (2015) Evaluation of nested network mobility approaches. In: 25th International Conference on Computer and Communication Engineering, ICCCE 2014, 23 - 24 September 2014, Kuala Lumpur, Malaysia.

Ali, M. S. M. and Leong, L. L. and Ramly, M. N. and Shaikh, S. A. Z. and Muhammad, S. (2017) Utilizing open source software running in inexpensive high performance computing system for cfd applications. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3061-3067. ISSN 1819-6608

Ali, Mohamad Wijayanuddin (2002) Risk assessment framework and criteria for major accidental release to the environment in Malaysia. In: 5th Annual National Conference on Occupational Safety & Health (COSH 2002), 25-26 June 2002, Bangi, Selangor. (Submitted)

Ali, Mohd. Tarmizi and Abd. Rahman, Tharek and Kamarudin, Muhammad Ramlee and Md. Tan, Mohd. Nor (2008) A reconfigurable aperture planar array antenna based on separated feeding network. In: Ecti-Con 2008: Proceedings Of The 2008 5Th International Conference On Electrical Engineering/Electronics, Computer, Telecommunications And Information Technology. Institute of Electrical and Electronics Engineers, New York, 225-228 . ISBN 978-142442101-5

Ali, Nazri and Rees, S. W. (2009) Linear root water uptake by vegetation. Malaysian Journal of Civil Engineering, 21 (2). pp. 110-124. ISSN 1823-7843

Ali, R. R. and Rahman, W. A. W. A. and Kasmaini, R. M. and Ibrahim, N. and Hasbullah, H. and Sadikin, A. N. and Asli, U. A. and Abouzari, E. (2017) Pineapple peel fibre biocomposite: Characterisation and biodegradation studies. Chemical Engineering Transactions, 56 . pp. 1333-1338. ISSN 2283-9216

Ali, Roshafima Rasit and Mohd. Raffae, Solehah and Che Jusoh, Nurfatehah Wahyuny and Kaur, J. and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Hasbullah, Hasrinah (2020) Self-cleaning and hydrophobic pineapple peel fibre based biocomposite. In: 4th International Conference on Advanced Technology and Applied Sciences, ICaTAS 2019, 10 - 12 September 2019, Cairo, Egypt.

Ali, S. M. and Hui, K. H. and Hee, L. M. and Leong, M. S. (2018) Automated valve fault detection based on acoustic emission parameters and support vector machine. Alexandria Engineering Journal, 57 (1). pp. 491-498. ISSN 1110-0168

Ali Ahmed, Bashir Abbas (2012) Time-diversity for sattellite link in tropical/equatorial region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ali Khan, Mohd. Noor Azli and Kiflee, Ag Kaifah Riyard (2018) Quality of information disclosure: a literature review. In: Persidangan Serantau Sains Sosial & Kemanusiaan (PSSSK) 2018.

Ali, Mohamad Wijayanuddin and Hassan, Onn (1992) Pencegahan susutan di dalam industri pemprosesan. Buletin FKKKSA, 6 (1). pp. 39-42. ISSN 0128-0740

Ali, Noorhalieza (1991) Applications of solvent extraction: A summary. Buletin FKKKSA, 5 (2). pp. 40-46. ISSN 0128-0740

Ali, Noorhalieza and Hassan, Onn (1991) Application of reverse osmosis in food processing. Buletin FKKKSA, 5 (1). pp. 35-38. ISSN 0128-0740

Ali, Noorhalieza and M. Rashid, M. Rashid and A., Harun (2001) Pencemaran bunyi trafik di sekitar kawasan persekolahan. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 536-541.

Alias, Nor Azira and Setan, Halim and Majid, Zulkepli (2008) Calibration of a digital camera for close-range photogrammetry application. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Alias, Ros Haslinda and Mohamad Noor, Noor Maizura and Mohd. Saman, Md. Yazid and Abdullah, Mohd. Lazim and Selamat, Ali (2011) Contractor selection using fuzzy comparison judgement. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Alinaghian, Reza (2008) Information and communications technology (ICT) policy implemention : case study : University of Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Aliyu Bello, A. and Ahmad, Arshad and Ripin, Adnan (2015) Process simulation of pineapple juice spray drying. Jurnal Teknologi, 75 (6). pp. 27-34. ISSN 0127-9696

Alizadeh, Mojtaba and Baharun, Sabariah and Zamani, Mazdak and Khodadadi, Touraj and Darvishi, Mahdi and Gholizadeh, Somayyeh and Ahmadi, Hossein (2015) Anonymity and untraceability assessment of authentication protocols in proxy mobile IPv6. Jurnal Teknologi, 72 (5). pp. 31-34. ISSN 0127-9696

Alizadeh, Mojtaba and Zamani, Mazdak and Baharun, Sabariah and Abdul Manaf, Azizah and Sakurai, Kouichi and Anada, Hiroaki and Keshavarz, Hassan and Chaudhry, Shehzad Ashraf and Khan, Muhammad Khurram (2015) Cryptanalysis and improvement of "a secure password authentication mechanism for seamless handover in proxy mobile IPv6 networks". Plos One, 10 (11). 0142716-0142716. ISSN 1932-6203

Alizadeh, Mojtaba and Zamani, Mazdak and Baharun, Sabariah and Hassan, Wan Haslina and Khodadadi, Touraj (2015) Security and privacy criteria to evaluate authentication mechanisms in proxy mobile IPv6. Jurnal Teknologi, 72 (5). pp. 27-30. ISSN 0127-9696

Alkawaz, Mohammed Hazim and Mohamad, Dzulkifli and Saba, Tanzila and Basori, Ahmad Hoirul and Rehman, Amjad (2015) The Correlation Between Blood Oxygenation Effects and Human Emotion Towards Facial Skin Colour of Virtual Human. 3D Research, 6 (2). ISSN 2092-6731

Alkhafaji, Ali A. R. and Amir Sjarif, Nilam Nur and Shahidan, M. A. and Mohd. Azmi, Nurulhuda Firdaus and Md. Sarkan, Haslina and Chuprat, Suriayati (2021) Tamper detection and localization for Quranic text watermarking scheme based on hybrid technique. Computers, Materials and Continua, 68 (1). pp. 77-102. ISSN 1546-2218

Alkhafaji, Ali A. R. and Amir Sjarif, Nilam Nur and Shahidan, M. A. and Mohd. Azmi, Nurulhuda Firdaus and Md. Sarkan, Haslina and Chuprat, Suriayati and Khalaf, Osamah Ibrahim and Al-Khanak, Ehab Nabiel (2021) Payload capacity scheme for Quran text watermarking based on vowels with Kashida. Computers, Materials and Continua, 67 (3). pp. 3865-3885. ISSN 1546-2218

Allam, Allam Hassan (2012) User experience evaluation: E-Learning @ UTM mobile application case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Almhab, Ayoub and Busu, Ibrahim (2008) Decision support system for estimating actual crop evapotranspiration using remote sensing, GIS and hydrological models. In: 7th Annual Asian Conference & Exhibition on Geopastial Information, Technology and Application, 18-20 August 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Almhab, Ayoub and Busu, Ibrahim (2008) Evapotranspiration estimation using a normalized difference vegetation index transformation of two satellites data in arid mountain areas. In: 7th International Symposium 7 Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Almhab, Ayoub and Busu, Ibrahim (2009) Estimation of evapotranspiration using fused remote sensing image data and energy balance model for improving water management in arid area. In: 2009 International Conference on Computer Engineering and Technology. Article number 4769659, 2 . IEEE, pp. 529-533. ISBN 978-076953521-0

Alnahari, Abdulqudos Y. and Ahmad, Noor Azurati and Yusof, Yusnaidi (2018) Modified weighted centroid algorithm for indoor and outdoor positioning using wireless sensors network. International Journal of Advanced and Applied Sciences, 5 (2). pp. 33-36. ISSN 2313-626X

Alshami, I. H. and Ahmad, N. A. and Sahibuddin, S. (2015) Dynamic WLAN fingerprinting RadioMap for adapted indoor positioning model. In: 13th International Conference on New Trends in Intelligent Software Methodology Tools and Techniques, SoMeT 2014, 22 - 24 September 2014, Langkawi, Malaysia.

Alshami, Iyad H. and Ahmad Salleh, Noor Azurati and Sahibuddin, Shamsul (2015) People’s ppresence effect on wlan-based IPS’ accuracy. Jurnal Teknologi, 77 (9). pp. 173-178. ISSN 0127-9696

Alwi, S. M. Y. W. and Husain, M. K. A. and Zaki, N. I. M. (2019) Marine growth inspection for jacket structures by behaviour and sensitivity analysis. In: 7 International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Amari, Hudabiyah Arshad (2012) Multiphase flow imaging using ultrasonic tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Amat, Nor' Ainah (2012) The integration of aerial and close-range photogrammetry for levels of details representation in city modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Amat, R. C. and Ismail, S. and Wahab, M. H. and Ahmad, N. H. and Rani, W. N. M. W. M. (2020) A dimension of biophilia in urban design. In: The 1st International Conference on Urban Design and Planning, 10 Sep 2019, Semarang, Indonesia.

Ambran, Sumiaty and Ahmad, Fauzan and Ibrahim, Amalina Athira and Baharudin, Nurul Atiqah and Osamu, Mikami and Sugiyama, Rohei and Chiemi, Fujikawa (2018) Uv-curable resin microlens on optical pillars for optical interconnect. In: Japan Society of Applied Physics, 15 October 2018 through 18 October 2018, Taiwan.

Ambrose, A. F. and Al-Amin, A. Q. and Rasiah, R. and Saidur, R. and Amin, N. (2017) Prospects for introducing hydrogen fuel cell vehicles in Malaysia. International Journal of Hydrogen Energy, 42 (14). pp. 9125-9134. ISSN 0360-3199

Ameen, O. F. and Younus, M. H. and Aziz, M. S. and Ibrahim, R. R. (2016) Temperature and water level measurement of liquid in a tank using fiber Bragg Grating. Jurnal Teknologi, 78 (3). pp. 261-265. ISSN 0127-9696

Ameen Alkawaz, Mohammad Hazim (2013) Real-time rendering facial skin colours to enhance realism of virtual human. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Amer, N. H. and Zamzuri, H. and Hudha, K. and Aparow, V. R. and Kadir, Z. A. and Abidin, A. F. Z. (2016) Modelling and trajectory following of an armoured vehicle. In: 2nd SICE International Symposium on Control Systems, ISCS 2016, 7 March 2016 through 10 March 2016, Japan.

Amer, Noor Hafizah and Hudha, Khisbullah and Zamzuri, Hairi and Aparow, Vimal Rau and Zainal Abidin, Amar Faiz and Abdul Kadir, Zulkiffli and Murrad, Muhamad (2018) Adaptive modified Stanley controller with fuzzy supervisory system for trajectory tracking of an autonomous armoured vehicle. Robotics and Autonomous Systems, 105 . pp. 94-111. ISSN 0921-8890

Amerudin, Shahabuddin (2012) An amalgamated 3D spatial data model for city modelling. In: XXII ISPRS Congress, Technical Commission II (Volume XXXIX-B2), 25 August-01 Sept, 2012, Melbourne, Australia.

Amin, Peshawa Omer (2012) Structural and optical properties of randomly oriented ZnO nanowires. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Amin, Zamree and Mohammad, Roslina and Othman, Norazli (2020) Review and comparison of confined space risk assessment tools practised by industry code of practice for safe working in confined space of Malaysia, 2010 (ICOP 2010). Journal of Advanced Research in Business and Management Studies, 18 (1). pp. 16-23. ISSN 2462-1935

Amin, Zamree and Mohammad, Roslina and Othman, Norazli and Amrin, Astuty and Abdul Aziz, Sa'ardin and Maarop, Nurazean (2018) Recent review on legislations related to risk assessment for confined space. International Journal of Mechanical Engineering and Technology, 9 (1). pp. 934-949. ISSN 0976-6340

Amin, Zamree and Mohammad, Roslina and Othman, Norazli and Amrin, Astuty and Abdul Aziz, Saárdin (2018) Recent review on standards related to risk assessment for confined spaces. International Journal of Mechanical Engineering and Technology, 9 (1). pp. 950-969. ISSN 0976-6340

Amin @ Mohd. Amin, Nor Fadila and Abdul Latif, Adibah and Muhammad, Siti Aisyah and Leong, Ting Che (2014) Synthesis and characterization of cassava starch nanocrystals by hydrolysis method. In: Advanced Materials Research, 20-22 Aug, 2014, Kuala Lumpur, Malaysia.

Aminu, Mansir (2007) A geographic information system (GIS) and multi-criteria analysis for sustainable tourism planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Amir Sjarif, Nilam Nur and Ya'Acob, Suraya and Mohd. Yusoff, Rasimah Che and Mohd. Azmi, Nurulhuda Firdaus and Yuhaniz, Siti Sophiayati and Wan Safie, Wan Nazirul Hafeez (2018) SMS spam classification using vector space model and artificial neural network. In: 4th International Workshop on Big Data Analytics 2018.

Amiri, I. S. and Alavi, S. E. and Supaat, A. S. M. and Ali, J. and Ahmad, H. (2016) Temporal soliton: generation and applications in optical communications. Jurnal Teknologi, 78 (3). pp. 271-276. ISSN 0127-9696

Amirudin, Roslan (2003) An integrated construction safety system: a knowledge based system approach. Project Report. UTM. (Unpublished)

Ampanatham, Puvanieshvaran and Mad Kaidi, Hazilah and Sarip, Shamsul (2020) Automated electrostatic discharge self-audit system in semiconductor industry. Journal of Advanced Research in Applied Mechanics, 65 (1). pp. 27-31. ISSN 2289-7895

Amran, Fadina and Ahmad Zaini, Muhammad Abbas and Ali, Asmadi (2020) Metals hydroxide activation of casuarina empty fruit for methylene blue and congo red removal. In: Proceedings of the Third International Conference on Separation Technology 2020 (ICoST 2020), 15 August 2020, Virtual.

Amran, M. E. and Muhtazaruddin, M. N. and Bani, N. A. and Kaidi, H. M. and Hassan, M. Z. and Sarip, S. and Muhammad-Sukki, F. (2019) Optimal distributed generation in green building assessment towards line loss reduction for Malaysian public hospital. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1180-1188. ISSN 2089-3191

Amran, M. E. and Muhtazaruddin, M. N. and Bani, N. A. and Syed Abd. Rahaman, S. A. and Yusoff, N. M. and Azizul, M. H. and Muhammad-Sukki, F. (2019) Photovoltaic-integrated review and expansion need in green building landscape for bridging the malaysian re policy. Indonesian Journal of Electrical Engineering and Computer Science, 17 (1). pp. 27-35. ISSN 2502-4752

Amran, M. E. and Muhtazaruddin, M. N. and Kamaruddin, S. A. and Muhammad-Sukki, F. and Abu-Bakar, S. H. and Ayub, A. S. and Bani, N. A. and Saudi,, A.S.M. and Ardila-Rey, J. A. (2020) Renewable energy performance of the green buildings: key-enabler on useful consumption yield. IEEE Access, 8 . pp. 95747-95767. ISSN 2169-3536

Amran, Mohd. Effendi and Muhtazaruddin, Mohd. Nabil (2018) Assessment of renewable distributed generation in green building rating system for public hospital. International Journal of Engineering & Technology, 7 (3.15). pp. 40-45. ISSN 2227-524X

Amran, Mohd. Effendi and Muhtazaruddin, Mohd. Nabil and Muhammad Sukki, Firdaus and Bani, Nurul Aini and Ahmad Zaidi, Tauran Zaidi and Kamaluddin, Khairul Azmy and Ardila Rey, Jorge Alfredo (2019) Photovoltaic expansion-limit through a net energy metering scheme for selected Malaysian public hospitals. Sustainability (Switzerland), 11 (18). pp. 1-30. ISSN 2071-1050

Amrin, Astuty and Muhammad Faim, Aezal (2019) High temperature oxidation behaviour of substitution vanadium with iron in ti-6al-4v metal alloy: a review. Open International Journal of Informatics, 7 (1). pp. 84-91. ISSN 2289-2370

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah (2021) Cloud computing acceptance among public sector employees. Telkomnika (Telecommunication Computing Electronics and Control), 19 (1). pp. 124-133. ISSN 1693-6930

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah and Chuprat, Suriayati (2019) Acceptance of cloud computing in the Malaysian public sector: A proposed model. International Journal of Engineering Business Management, 11 . pp. 1-9. ISSN 1847-9790

Amron, Mohd. Talmizie and Ibrahim, Roslina and Abu Bakar, Nur Azaliah and Chuprat, Suriayati (2020) The validity and reliability evaluation of instruments for cloud computing acceptance study. In: 6th IEEE International Conference on Information Management, ICIM 2020, 27 March 2020 - 29 March 2020, London, United Kingdom.

Ana, A. and Meirawan, D. and Kustiawan, I. and Supriatna, N. and Nugraha, E. and Minghat, A. D. and Muktiarni, Muktiarni and Dwiyanti, V. (2020) Future jobs in coming of industry revolution 4.0. International Journal of Advanced Science and Technology, 29 (5). pp. 567-574. ISSN 2005-4238

Ana, A. and Minghat, Asnul Dahar and Purnawarman, Pupung and Saripudin, S. and Muktiarni, M. and Dwiyanti, Vina and Mustakim, Siti Salina (2020) Students' perceptions of the twists and turns of e-learning in the midst of the covid 19 outbreak. Revista Romaneasca Pentru Educatie Multidimensionala, 12 (1). pp. 15-26. ISSN 2066-7329

Andalib, Ramin (2012) Structural performance of palm oil fuel ash-fly ash geopolymer concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Andina Syafrina, Andina Syafrina and Abas, Norzaida and O., Noor Shazwani (2018) Stochastic modeling of rainfall series in Kelantan using an advanced weather generator. Engineering Technology & Applied Science Research, 8 (1). pp. 2537-2541. ISSN 2241-4487

Ang, C. K. and Tey, W. Y. and Kiew, P. L. and Fauzi, M. (2017) An artificial intelligent approach using fuzzy logic for sleep quality measurement. Journal of Mechanical Engineering, SI 4 (2). pp. 31-47. ISSN 1823-5514

Ang, J. H. and Yusup, Y. and Salim, S. A. Z. S. and Ahmad, M. I. (2019) A CFD study of flow around an elevator towards potential kinetic energy harvesting. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (1). pp. 54-65. ISSN 2289-7879

Ang, J. H. and Yusup, Y. and Zaki, S. A. and Salehabadi, A. and Rahman, M. B. A. and Ahmad, M. I. (2020) A review on kinetic energy harvesting towards innovative technological advances from sustainable sources. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 66 (1). pp. 12-41. ISSN 2289-7879

Ang, Liqi (2010) Simulation of sequencing rules in a five-similar-machine job shop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anggoro, Didi Dwi and Saidina Amin, Nor Aishah (2001) Hydroxyl group studies by FTIR and catalytic activity of dealuminated ZSM-5 zeolite for ethylene conversion. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 58-63.

Ani, Farid Nasir and Badawi, E.M and Kannan, K.S (2005) The Effect of Absorber Packing Height on the Performance of a Hybrid Liquid Desiccant System. Renewable Energy, 30 (15). pp. 2247-2256. ISSN 09601481

Anisa, N. I. and Morad, N. A. and Iwai, Y. and Shah Ismail, M. H. (2016) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407 . 197.e1-197.e10. ISSN 0378-3812

Anisa, Nor Ilia and Morad, Noor Azian and Iwai, Yoshio and Shah Ismail, Mohd. Halim (2015) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407 . 197.e1-197.e10. ISSN 0376-7388

Anjomshoae, Ali and Hassan, Adnan and Samuel, Cherian and Wong, Kuan Yew (2015) Effect of information sharing and capacity adjustment on healthcare service supply chain: the case of flood disaster. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Anjum Iqbal, Anjum Iqbal (2006) Danger theory metaphor in artificial immune system for system call data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Annanurov, B. and Noor, N. (2021) A compact deep learning model for khmer handwritten text recognition. IAES International Journal of Artificial Intelligence, 10 (3). ISSN 2089-4872

Anshah, Siti Aminah and Ahmad, Anuar and Mat Amin, Zulkarnaini (2008) Arima model time-series forecasting for structural monitoring using RTK-GPS. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Anuar, L. and Amrin, A. and Mohamad, R. and Aziz, S. A. and Toozandehjani, M. (2019) Development of proving ground field test for establishment of vehicle accelerated corrosion test procedure in Malaysia. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6348-6356. ISSN 2229-8649

Anuar, L. and Amrin, A. and Mohammad, R. and Ourdjini, A. (2016) Vehicle accelerated corrosion test procedures for automotive in Malaysia. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Anuar, N. S. S. and Kassim, A. A. and Utsumi, M. and Iwamoto, K. and Goto, M. and Shimizu, K. and Othman, N. and Zakaria, Z. and Sugiura, N. and Hara, H. (2017) Characterization of musty odor-producing actinomycetes from tropics and effects of temperature on the production of musty odor compounds. Microbes and Environments, 32 (4). pp. 352-357. ISSN 1342-6311

Anuar, Syahid and Selamat, Ali and Sallehuddin, Roselina (2015) Hybrid artificial neural network with artificial bee colony algorithm for crime classification. Advances in Intelligent Systems and Computing, 331 . pp. 31-40. ISSN 2194-5357

Anwar, N. and Nik Mahmood, N. H. and Yusliza, M. Y. and Ramayah, T. and Noor Faezah, J. and Khalid, W. (2020) Green human resource management for organisational citizenshipbehaviour towards the environment and environmental performance on a university campus. Journal of Cleaner Production, 256 . ISSN 0959-6526

Anwar, Zahrina and Gunawan, Teddy Surya and Ahmad, Robiah and Kartiwi, Mira (2021) Development of smart alarm based on sleep cycle analysis. In: 2021 IEEE International Instrumentation and Measurement Technology Conference, I2MTC 2021, 17 - 20 May 2021, Virtual, Glasgow.

Apandi, N. H. M. and Zuikafly, S. N. F. and Kasim, N. and Mohamed, M. A. and Harun, S. W. and Ahmad, F. (2019) Observation of dark and bright pulses in Q-switched erbium doped fiber laser using graphene nano-platelets as saturable absorber. Bulletin of Electrical Engineering and Informatics, 8 (4). 1358 -1365. ISSN 2089-3191

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Manaf, A. A. and Araghi, Sagheb Kohpayeh (2015) An access control framework in an ad hoc network infrastructure. In: 1st International Conference on Communication and Computer Engineering, ICOCOE 2014, 20 - 21 May 2014, Melaka, Malaysia.

Arai, N. (2016) Virtual mass of any shape of body by using general mapping function. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Sarawak; Malaysia.

Arai, Norio (2016) Virtual mass of regular polygon at angle of attack. Jurnal Teknologi, 78 (6-5). pp. 49-51. ISSN 0127-9696

Aras, Mohd. Shahrieel Mohd. and Abdullah, Shahrum Shah and Rahman, Ahmad Fadzli Nizam Abdul and Basar, Mohd. Farriz and Kassim, Anuar Mohamed and Jaafar, Hazriq Izzuan (2015) Analysis of movement for unmanned underwater vehicle using a low cost integrated sensor. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014, 28 - 30 May 2014, Penang, Malaysia.

Arash, Arami Niya and Xiong, Xiao and Al Ghafri, Saif Z. S. and Jiao, Fuyu and Khamphasith, Martin and Pouya, Ehsan Sadeghi and Sadaghiani, Mirhadi S. and Yang, Xiaoxian and Tsuji, Tomoya and Tanaka, Yukio and Seiki, Yoshio and May, Eric F. (2020) Measurement and modelling of the thermodynamic properties of carbon dioxide mixtures with HFO-1234yf, HFC-125, HFC-134a, and HFC-32: vapour-liquid equilibrium, density, and heat capacity. International Journal of Refrigeration, 118 . pp. 514-528. ISSN 0140-7007

Arash, Habibi Lashkari and Abdul Manaf, Azizah and Masrom, Maslin and Mohd. Daud, Salwani (2011) Security evaluation for graphical password. In: International Conference on Digital Information and Communication Technology and its Applications (DICTAP2011), June 21-23, 2011, Dijon, France .

Ardani, Mohd. Ibthisham (2012) Heat distribution study on turbocharger turbine volute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ardila Rey, J. A. and Ortiz, J. E. and Creixell, W. and Muhammad Sukki, F. and Bani, N. A. (2020) Artificial generation of partial discharge sources through an algorithm based on deep convolutional generative adversarial networks. IEEE Access, 8 . pp. 24561-24575. ISSN 2169-3536

Arianti, D. and Shahril, R. and Baharun, S. and Islam, A. K. M. M. and Komaki, S. (2015) Fold contour estimation technique for pre-processing 3D colonoscopy images: Polyp cases. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Ariffin, Aini Suzana and Baqutayan, Shadiya Mohamed S. (2015) Increase technological innovation in research & technology institutions by adopting (ITIC-VC). In: International Conference on Innovation and Management (IAM2015W), 3-6 Feb, 2015, Singapore.

Ariffin, Aini Suzana and Mathew, Mathew Ferns and Yong, Chen Chen (2015) The challenges of corporatization policy for government research and technology organizations for wealth creation. Journal of Science Technology & Innovation Policy, 1 (2). pp. 1-21. ISSN 2550-2018

Arifin, Rizal and Malyadi, Muhammad and Munaji, Munaji and Buntoro, Ghulam Asrofi and Nurcahyo, Alif Mahendara Bagus and Ridwan, Ridwan and Darminto, Darminto and Johari, Norhasnidawani and Selamat, Ali (2019) Glassy NiTi produced with different cooling times: structural investigation using molecular dynamics simulations. Results in Physics, 15 . pp. 1-3. ISSN 2211-3797

Aris, S. A. M. and Bani, N. A. and Muhtazaruddin, M. N. and Taib, M. N. (2018) EEG calmness index establishment using computational of Z-score. International Journal of Engineering & Technology, 7 (4.11). pp. 44-48. ISSN 2227-524X

Arjunaidi, Ayuni Afiqah and Quzwain, Kamelia and Yamada, Yoshihide and Kamardin, Kamilia and Dinh, Nguyen Quoc (2021) Focal region ray tracing of dual spherical reflector antenna. In: 2020 International Symposium on Antennas and Propagation, ISAP 2020, 25 - 28 January 2021, Virtual, Osaka.

Arof, K. Z. M. and Ismail, S. and Saleh, A. L. (2018) Contractor's performance appraisal system in the Malaysian construction industry: Current practice, perception and understanding. International Journal of Engineering and Technology(UAE), 7 (3). pp. 46-51. ISSN 2227-524X

Arof, K. Z. M. and Ismail, S. and Saleh, A. L. and Wahab, M. H. and Amat, R. C. (2019) Current contractors performance appraisal system in malaysian construction industry: perception amongst construction. International Journal of Innovative Technology and Exploring Engineering, 8 (7). pp. 417-419. ISSN 2278-3075

Arof, K. Z. M. and Ismail, S. and Subramaniam, C. and Azman, S. and Rani, W. N. M. W. M. and Zolkepli, M. F. (2020) Critical strategies for construction players in the adoption of biophilic city concept in Malaysia. Planning Malaysia, 18 (1). pp. 181-192. ISSN 1675-6215

Arof, K. Z. M. and Ismail, Syuhaida and Najib, N. H. and Amat, R. C. and Ahmad, N. H. B. (2020) Exploring opportunities of adopting biophilic cities concept into mixed-use development project in malaysia. In: 1st International Conference on Urban Design and Planning, ICUDEP 2019, 10 September 2019, Semarang, Indonesia.

Arshad, Farah Waheeda and Doris, Hooi-Ten Wong and Maarop, Nurazean and Samy, Ganthan Narayana (2019) Review: evaluation of static and animated visualization in meteorology. International Journal of Latest Transactions in Engineering And Science (IJLTES), 8 (1). pp. 14-19. ISSN 2321-0605

Arumugham, Thilagavathi and Husaini, Nur ‘Amirah and Abdullah, Norhayati and Koji, Iwamoto and Mohamad, Shaza Eva (2021) Determination of anaerobic ammonium oxidation (anammox) bacteria in the domestic wastewater. Desalination and Water Treatment, 214 . pp. 355-366. ISSN 1944-3994

Arumugham, Thilagavathi and Husaini, Nur ‘Amirah and Yuzir, Ali and Mohamad, Shaza Eva and Iwamoto, Koji and Abdullah, Norhayati (2020) Anammox reactor treating low strength domestic wastewater: a review. IOP Conference Series: Earth and Environmental Science, 479 (1). pp. 1-12. ISSN 1755-1307

Asadpour, Robabeh and Yavari, Saba and Kamyab, Hesam and Ashokkumar, Veeramuthu and Chelliapan, Shreeshivadasan and Yuzir, Ali (2021) Study of oil sorption behaviour of esterified oil palm empty fruit bunch (OPEFB) fibre and its kinetics and isotherm studies. Environmental Technology and Innovation, 22 . p. 101397. ISSN 2352-1864

Asako, Y. and Hong, C. (2017) On Temperature Jump Condition for Slip Flow in a Microchannel With Constant Wall Temperature. Journal of Heat Transfer, 139 (7). ISSN 0022-1481

Asako, Yutaka and Chung, Pyo Hong and Maeda, Kenshi and Morini, Gian Luca (2018) Scaling effects in transition region between laminar and turbulent gas flows through micro-tubes. In: Proceedings of the 5th European Conference on Microfluidics Micro-Flu18.

Asako, Yutaka and Faghri, Mohammad and Tan, Lit Ken and Che Sidik, Nor Azwadi (2018) Outflow velocity for SIMPLE algorithm for unsteady forced convection flows with variable density. International Communications in Heat and Mass Transfer, 92 . pp. 73-77. ISSN 0735-1933

Asako, Yutaka and Hong, Chungpyo (2017) Turbulent temperature profile in the quasi-fully developed region of a micro-tube. Journal of Thermal Science and Technology, 12 (1). pp. 1-12. ISSN 1880-5566

Asako, Yutaka and Sharma, Manish (2018) Modification of SIMPLE algorithm to handle supercritical natural circulation in a loop. International Journal of Heat and Mass Transfer, 126 . pp. 425-431. ISSN 0017-9310

Asako, Yutaka and Shigeishi, Takayuki and Katanoda, Hiroshi and Hong, Chung Pyo (2018) An experimental estimation in the recovery factor of microchannel gas flow by measuring the adiabatic wall temperature. In: 2nd International Research Symposium In Tourism Hospitality & Events: Contemporary Issues & Future Scenarios.

Asako, Yutaka and Shigeishi, Takayuki and Rehman, Danish and Morini, Gian Luca and Hong, Chung Pyo (2018) Data reduction of average friction factor of gaseous flow in micro-channels with adiabatic wall. In: Migrate 3rd International Workshop.

Asan, Amran (2008) Safety and health costing by medium and small class contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asgari, A.A. and Hamid, A.B.A. and Ibrahim, S. and Asgarpour, R. and Quoquab, Farzana (2015) The contribution of knowledge exchange to supplier’s operational performance. Advanced Science Letters, 21 (6). pp. 1807-1810. ISSN 1936-6612

Ashourian Jozdani, Mohammad Hossein (2010) Steady-state and dynamic performance of micro grid on electrical distribution network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ashraaf, Muhammad Amirul and Othman, Nooraini (2019) Factors for pornography addiction and its implication on teenager personality. International Journal of Academic Research in Business and Social Sciences, 9 (11). pp. 1148-1160. ISSN 2222-6990

Ashri, M. F. and Rejab, N. A. and Ahmad, Z. A. and Abdullah, N. S. and Badarulzaman, N. A. and Mat, R. A. A. R. and Ali, W. F. F. W. (2019) Densification and grain growth of microwave-sintered yttrium iron garnet. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Asiaei, Arash and Ab. Rahim, Nor Zairah (2019) A multifaceted framework for adoption of cloud computing in Malaysian SMEs. Journal of Science and Technology Policy Management, 10 (3). pp. 708-750. ISSN 2053-4620

Asillam, Mohd. Fairos and Mohd. Tobi, Siti Uzairiah and Subari, Mustafa Din (2020) Evaluation of space science R&D via disruptive space technology (DST). Solid State Technology, 63 (6). pp. 6706-6716. ISSN 0038-111X

Asipita, Salawu Abdulrahman (2012) Performance of Bambusa Arundinacea as green inhibitor for corrosion of steel reinforcement in concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Askar, A. K. A. J. and Sjarif, N. N. A. (2021) Annotated corpus of mesopotamian-iraqi dialect for sentiment analysis in social media. International Journal of Advanced Computer Science and Applications, 12 (4). ISSN 2158-107X

Aslfattahi, Navid and Saidur, R. and Che Sidik, Nor Azwadi and Mohd. Sabri, Mohd. Faizul and Zahir, Md. Hasan (2020) Experimental assessment of a novel eutectic binary molten salt-based hexagonal boron nitride nanocomposite as a promising PCM with enhanced specific heat capacity. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (1). pp. 73-85. ISSN 2289-7879

Asmi, Ade and Rasli, Amran and Abdul Majid, Muhd. Zaimi and Abdul Rahman, Ismail (2009) Malaysian practitioners perception on knowledge management in construction consulting companies. The Journal of Modern Applied Science, 3 (7). pp. 103-114. ISSN 1913-1844 (Prints); 1913-1852 (Electronic)

Asri, M. A. N. M. and Nawi, M. N. M. and Nadarajan, S. and Osman, W. N. and Harun, A. N. (2016) Success factors of JIT integration with IBS construction projects- a literature review. International Journal of Supply Chain Management, 5 (2). pp. 71-76. ISSN 2051-3771

Atago, Y. and Shimodaira, J. and Araki, N. and Othman, N. B. and Zakaria, Z. and Fukuda, M. and Futami, J. and Hara, H. (2016) Identification of novel extracellular protein for PCB/biphenyl metabolism in Rhodococcus jostii RHA1. Bioscience, Biotechnology and Biochemistry, 80 (5). pp. 1012-1019. ISSN 0916-8451

Atan, F. M. and Zulkifli, N. and Idrus, S. M. and Ismail, N. A. and Zin, A. M. and Ramli, A. and Yusoff, N. M. (2021) Security enhanced dynamic bandwidth allocation algorithm against degradation attacks in next generation passive optical networks. Journal of Optical Communications and Networking, 13 (12). ISSN 1943-0620

Atee, H. A. and Yasari, A. K. and Ahmad, R. and Mohd. Noor, N. (2019) Text in image steganography based on a dynamic non-sequential least significant bit technique in grayscale and rgb images. Journal of Theoretical and Applied Information Technology, 97 (5). ISSN 1992-8645

Atee, Hayfaa Abdulzahra and Ahmad, Robiah and Mohd. Noor, Norliza (2015) Cryptography and image steganography using dynamic encryption on LSB and color image based data hiding. Middle-East Journal of Scientific Research, 23 (7). pp. 1450-1460. ISSN 1990-9233

Athar, Muhammad and Mohd. Shariff, Azmi and Buang, Azizul and Nazir, Salman and Hermansyah, Heri and See, Tan Lian (2019) Process equipment common attributes for inherently safer process design at preliminary design stage. Process Safety and Environmental Protection, 128 . pp. 14-29. ISSN 0957-5820

Atherton, Helen J. and Gulston, Melanie K. and Bailey, Nigel J. and Cheng, Kian-Kai and Zhang, Wen and Clarke, Kieran and Griffin, Julian L. (2009) Metabolomics of the interaction between PPAR-? and age in the PPAR-?-null mouse. Molecular Systems Biology, 5 . ISSN 1744-4292

Athimulam, Arunasalam and Kumaresan, Sivakumar and Foo, Dominic Chwan Yee and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2005) Modelling and optimisation of tongkat ali water extract production utilising a batch process simulator. In: The Second Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM) International Conference, April 27-30, 2005, Manila, Philippines.

Atifahsaruchi, S. and Ariff, M. H. M. and Zamzuri, H. and Hassan, N. and Wahid, N. and Zakaria, N. J. (2019) the correlation model of head roll and lateral acceleration during curve driving via hammerstein-wiener. International Journal of Innovative Technology and Exploring Engineering, 8 (9). pp. 2586-2590. ISSN 2278-3075

Aung, Lwin Moe (2015) Prediction of surface roughness improvement and its limitation in automated precision mold lapping. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hiratsuka, Japan.

Aung, Lwin Moe and Aung, Myintzu Phyo (2015) Extraction of Myanmar noun phrase using maximum matching approach. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hiratsuka, Japan.

Aung, Lwin Moe and R. M. S., Zetty and Sahekhain, Asnizah and Sandaz, Pyae Sone and Abu, Aminudin (2015) On the improvement of vibration level of crankshaft system using design of experiment. Frontier Of Applied Plasma Technology, 8 (1). pp. 41-46. ISSN 1883-5589

Authin, Emily Amy and Liew, Peng Yen and Klemeš, Jirí Jaromír and Ho, Wai Shin and Che Jusoh, Nurfatehah Wahyuny and Mohammad Rozali, Nor Erniza (2021) Integration of combined heat and power energy systems with gas turbine in locally integrated energy sectors. Chemical Engineering Transactions, 83 . pp. 37-42. ISSN 2283-9216

Awan, A. Majid and Rajpoot, Nasir M. and Hussain, Syed Afaq and Md. Sap, Mohd. Noor (2007) Stack-run adaptive wavelet image compression using wavelet packets. Jurnal Teknologi Maklumat, 19 (2). pp. 101-114. ISSN 0128-3790

Awang, Mariyamni and Wan Abdul Rahman, Wan Aizan (2005) EOR additives from local sources. In: Improved Oil Recovery Asia 2005, 28-31March 2005, The Shangri-La Hotel, Kuala Lumpur. (Unpublished)

Awang, Hapini and Mat Aji, Zahurin and Sheik Osman, Wan Rozaini and Al-Mashhadani, Abdulrazak F. Shahatha and Mat Deli, Mazzlida (2020) Exploring teachers’ satisfaction toward virtual learning environment: Malaysian perspective. Solid State Technology, 63 (3). 0-10. ISSN 0038-111X

Awang, Mariah and Abdul Latif, Amirul Faiz and Mohamed Yusop, Fatimah and Abdul Rahman, Mohammad Ashraf and Hamidon, Nuramidah and Musa, Kamaruzzaman and Ahmad, Faridahanim (2019) Noise study of Air-conditioning system at UTHM Pagoh: a facility management approach. Journal of Industry, Engineering and Innovation, 1 (2). pp. 1-4. ISSN 2672-7382

Awang, N. F. and Manaf, A. A. (2015) Automated security testing framework for detecting SQL injection vulnerability in web application. In: Global Security, Safety and Sustainability: Tomorrow's Challenges of Cyber Security - 10th International Conference, ICGS3 2015, 15 - 17 September 2015, London, United Kingdom.

Awang, N. W. and Ramasamy, D. and Kadirgama, K. and Samykano, M. and Najafi, G. and Che Sidik, Nor Azwadi (2019) An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130 . pp. 1163-1169. ISSN 0017-9310

Awang, Suryanti and Yusof, Rubiyah and Arfa, Reza (2012) Multimodal biometrics system: a feature level fusion of physical and behavioral biometric to improve person's identity recognition. ICIC Express Letters, 6 (2). pp. 543-548. ISSN 1881-803X

Awang, Mariyamni (1992) A summary of the graduate programs in the Petroleum Engineering Department, Stanford University. Buletin FKKKSA, 6 (1). pp. 21-25. ISSN 0128-0740

Awang, Mariyamni (1991) Distribution of the CPU time of a reservoir simulator. Buletin FKKKSA, 5 (2). pp. 59-62. ISSN 0128-0740

Ayob, Idarahayu (2017) Factors contributing to drone adoption in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Ayobami, Kayode Ojo and Ismail, Hairul Nizam and Tanko, Emmanuel Umaru and Musibau, Akintunde Ajagbe (2012) Exploring volunteer tourism as a panacea for sustainable poverty alleviation in Nigeria. International Journal of Research in Management & Technology, 2 (2). pp. 140-146. ISSN 2250-1363 (Print); 2249-9563 (Electronic)

Ayub, Muhammad Syazwan and Rozali, Amirul Azha and Marni, Nurazmallail (2019) Media Sosial dan Kecanduan Penggunaan Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Azami, Husna Hafiza R. and Ibrahim, Roslina (2019) Development and evaluation of massive open online course (MOOC) as a supplementary learning tool: an initial study. IntInternational Journal of Advanced Computer Science and Applications, 10 (7). pp. 1-6. ISSN 2158-107X

Azhim, Azran and Shafiq, Mohammad and Rasyada, Rahman and Furukawa, Katsuko and Ushida, Takashi (2015) The impact of acoustic intensity on solution parameters and decellularization using sonication treatment. Journal of Biomaterials and Tissue Engineering, 5 (3). pp. 195-203. ISSN 2157-9083

Azis, Tun Muhammad Norhaizad and Bani, Nurul Aini and Mad Kaidi, Hazilah and Mohd. Aris, Siti Armiza and Muhtazaruddin, Mohd. Nabil and Abd. Jalil, Siti Zura and Mohd. Izhar, Mohd. Azri and Usman, Sahnius (2018) Risk assessment on electrical maintenance activity at Menora Tunnel, Perak. Journal Of Advanced Research In Occupational Safety And Health, 1 (1). pp. 24-31. ISSN 2637-0255

Aziz, A. M. B. N. and Talib, N. B. A. and Ali, W. M. S. B. W. M. and Ismail, F. (2017) Research methodology in adapting service innovation and competitive advantage in Malaysian telecommunications industry. Advanced Science Letters, 23 (9). pp. 8898-8902. ISSN 1936-6612

Aziz, A. R. A. and Aziz, S. A. and Hassan, M. Z. (2017) Noise exposure among maintenance crews of C130H aircraft lead to the hearing impairment. Malaysian Journal of Public Health Medicine, 2017 (Specia). pp. 89-94. ISSN 1675-0306

Aziz, Anual (2005) Kajian ke arah merealisasikan jaringan rujukan tegak geodetik baru di negeri Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Aziz, Farhana (2015) Preparation and characterization of ternary blend polymer solar cells using solvent and thermal annealing treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Aziz, N. A. and Othman, M. F. (2017) Binary classification using SVM for sick and healthy chicken based on chicken’s excrement image. Pertanika Journal of Science and Technology, 25 (S). pp. 315-324. ISSN 0128-7680

Aziz, N. S. A. and Azmi, M. K. N. and Hashim, A. M. (2017) One-pot green synthesis of highly reduced graphene oxide decorated with silver nanoparticles. Sains Malaysiana, 46 (7). pp. 1083-1088. ISSN 0126-6039

Aziz, S. A. and Sam, S. M. and Mohamed, N. and Daud, S. M. and Rashid, S. Z. A. and Abas, H. and Yusof, M. F. and Dziyauddin, R. A. (2020) A review on region of interest-based hybrid medical image compression algorithms. Telkomnika (Telecommunication Computing Electronics and Control), 18 (3). pp. 1650-1657. ISSN 1693-6930

Aziz, S. A. A. and Mazlan, S. A. and Ismail, N. I. N. and Ubaidillah, U. and Choi, S. B. and Khairi, M. H. A. and Yunus, N. A. (2016) Effects of multiwall carbon nanotubes on viscoelastic properties of magnetorheological elastomers. Smart Materials and Structures, 25 (7). ISSN 0964-1726

Aziz Japar, Wan Mohd. Arif and Che Sidik, Nor Azwadi and Saidur, R. and Kamaruzaman, Natrah and Yutaka, Asako and Yusof, Siti Nurul Akmal (2020) The effect of triangular cavity shape on the hybrid microchannel heat sink performance. CFD Letters, 12 (9). pp. 1-14. ISSN 2180-1363

Azizan, Ahmad Azreen and Chelliapan, Shreeshivadasan and Kamyab, Hesam (2019) Safety analysis of ammonia exposure at a chemical plant. Journal of Advanced Research in Occupational Safety and Health, 4 (1). pp. 1-12. ISSN 2637-0255

Azizan, Muhamad Ariffudin and Kariya, Muhammad Azizi and Jasmi, Kamarul Azmi (2019) Media Sosial dan Penyebaran Budaya Transeksual Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Azizan, N. A. Z. and Yuzir, A. and Abdullah, N. (2021) Pharmaceutical compounds in anaerobic digestion: a review on the removals and effect to the process performance. Journal of Environmental Chemical Engineering, 9 (5). ISSN 2213-3437

Azizan, N. A. Z. and Yuzir, A. and Al-Qaim, F. F. and Abdullah, N. (2020) Anaerobic treatment performance in presence of pharmaceutically active compounds. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Kuala Lumpur, Malaysia.

Azizul, Muhammad Farid (2016) Sense shaping place: interaction of planning actor’s values in social- ecological resilience. PhD thesis, The University of Auckland, Degree of Doctor Of Philosophy (Planning).

Azlan, Nurul Azreen (2020) The Hashtag Game: Disrupting dissent during the Bersih 4 protest. Asiascape: Digital Asia, 7 (1-2). pp. 69-87. ISSN 2214-2304

Azman, Azreen Harina and Tukimat, Nurul Nadrah Aqilah and Malek, M. A. and Che Ros, Faizah (2021) Analysis of Malaysia electricity demand and generation by 2040. In: 4th International Conference on Science and Technology Applications in Climate Change, STACLIM 2021, 1 - 2 July 2021, Selangor, Virtual.

Azman, N. F. and Abdeshahian, P. and Al Shorgani, N. K. N. and Hamid, A. A. and Kalil, M. S. (2016) Production of hydrogen energy from dilute acid-hydrolyzed palm oil mill effluent in dark fermentation using an empirical model. International Journal of Hydrogen Energy, 41 (37). pp. 16373-16384. ISSN 0360-3199

Azman, N. F. and Abdeshahian, P. and Kadier, A. and Shukor, H. and Al Shorgani, N. K. N. and Hamid, A. A. and Kalil, M. S. (2016) Utilization of palm kernel cake as a renewable feedstock for fermentative hydrogen production. Renewable Energy, 93 . pp. 700-708. ISSN 0960-1481

Azman, N. F. and Yamauchi, M. and Yamada, M. and Ikeda, S. and Yamaguchi, T. and Yagi, F. and Hara, H. (2020) Utilization of distillation waste of sweet potato shochu lees for lentinula edodes cultivation. Journal of Material Cycles and Waste Management, 21 (2). pp. 336-344. ISSN 1438-4957

Azman, N. U. and Husain, M. K. A. (2019) Structural integrity of fixed offshore platforms by incorporating wave-in-deck load. In: 7th International Conference on Marine Structures, MARSTRUCT 2019, 6-8 May 2019, Dubrovnik, Croatia.

Azman Shah, S. M. S. and Haron, H. N. and Mahrin, M. N. (2021) The trend of big data in workforce frameworks and occupational standards towards an educational intelligent economy. Journal of Technical Education and Training, 13 (1). ISSN 2229-8932

Azmi, M. Z. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Zakuan, F. R. A. and Zulkepli, K. A. and Ismail, N. H. F. and Zakariya, M. S. (2017) Steering intervention strategy for side lane collision Avoidance. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4265-4269. ISSN 1819-6608

Azmi, N. S. and Ahmad, R. and Ibrahim, R. (2016) Fluorescent light (FL), red LED and blue LED spectrums effects on in vitro shoots multiplication. Jurnal Teknologi, 78 (6-6). pp. 93-97. ISSN 0127-9696

Azzeri, M. N. and Adnan, Faizul Amri and Md. Zain, Mohd. Zarhamdy (2015) Review of course keeping control system for unmanned surface vehicle. Jurnal Teknologi, 74 (5). pp. 11-20. ISSN 0127-9696

Abdul Manaf, Norhuda and Abbas, Ali (2018) Economic and environmental sustainability of low carbon power generation: relevancy in Malaysia green technology master plan (GTMP). In: 4th International Conference of Chemical Engineering & Industrial Biotechnology.

Abd. Aziz, Nur Suhaili and Nakajima, Yoshikata and Sato, Haruyoshi and Maekawa, Toru and Hashim, Abdul Manaf (2018) One-pot green synthesis of Ag nanoparticle-decorated reduced graphene oxide composites: effect of Ag/graphene oxide volume ratio and its demonstration as low-voltage on-chip photodetector. Journal of Materials Science, 53 (16). pp. 11620-11632. ISSN 0022-2461

B

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Kermanshahi, Emad Kasra (2018) Balancing of life cycle carbon and cost appraisal on alternative wall and roof design verification for residential building. Construction Innovation-England, 18 (3). pp. 274-300. ISSN 1471-4175

Basri, Hazlami Fikri and Anuar, Aznah Nor and Ab. Halim, Mohd. Hakim (2020) Pilot scale study on characterization and performance of aerobic granular sludget o treat domestic wastewater. Malaysian Journalof Fundamental and Applied Sciences, 16 (1). pp. 38-43. ISSN 2289-5981

Belhadi, Amine and Mohd. Sha’ri, Yusof and Touriki, Fatima Ezahra and El Fezazi, Said (2018) Lean production in SMEs: literature review and reflection on future challenges. Journal of Industrial and Production Engineering, 35 (6). pp. 368-382. ISSN 2168-1015

Baba, Umar Muktar (2015) Adsorption of carbon dioxide and methane on alkali metal exchanged silicoaluminophosphate zeolite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Babamohammadi, Shervan (2011) Optimization of bioethanol production from oil palm trunk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Babar, Z. and Mohd. Izhar, Mohd. Azri and Nguyen, H. and Botsinis, Panagiotis and Alanis, D. and Chandra, D. and Ng, S. and Maunder, R. and Hanzo, L. (2018) Unary-coded dimming control improves ON-OFF keying visible light communication. IEEE Transactions on Communications, 66 (1). pp. 255-264. ISSN 0090-6778

Bachtiar, N. A. and Sarmidi, Mohamad Roji (1997) Spray drying as the alternative method for production of tropical fruit powder. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Bade, Abdullah (2003) Pengesanan perlanggaran menggunakan gabungan isipadu penyempadanan berjujukan dalam persekitaran maya interaktif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Badrun, Mohd. Zahrullail (2011) Prediction of ultimate bored pile capacity using global strain extensometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bae, Sunyoung and Zaini, Nabilah and Nor Kamarudin, Khairul Sozana and Yoo, Kye Sang and Kim, Jinsoo and Othman, Mohd. Roslee (2018) Rapid solvothermal synthesis of microporous UiO-66 particles for carbon dioxide capture. Korean Journal of Chemical Engineering, 35 (3). pp. 764-769. ISSN 0256-1115

Baeuo, M. O. M. and Ab. Rahim, N. Z. B. and Alaraibi, A. A. M. (2017) Technology factors influencing e-government readiness. Journal of Theoretical and Applied Information Technology, 95 (8). pp. 1637-1645. ISSN 1992-8645

Baguda, Yakubu S. and Fisal, Norsheila and Syed, Sharifah Hafizah and Yusof, Sharifah Kamilah and Abdullah, Mohd. S. and Mohd., Alias and Zulkarmawan, Abubakar (2009) Mobile streaming of H.264 video over gilbert - elliotts channel. World Academy of Science, Engineering and Technology, 24 . pp. 937-940. ISSN 2010-376X (Prints); 2010-3778 (Electronic)

Bahar, N. D. and Marimuthu, S. and Yahya, W. J. (2016) Pulsed Nd: YAG laser drilling of aerospace materials (Ti-6Al-4V). In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Baharin, R. H. B. M. and Tuan, N. T. and Yamada, Y. and Kamardin, K. B. (2016) Electrical characteristic changes by setting conditions of Normal-Mode Helical Antenna in a phantom. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Baharom, Mohammad Haniff and Abdullah Habib, Siti Nora Haryati and Ismail, Syuhaida (2021) Building information modelling (Bim): Contractual issues of intellectual property rights (ipr) in construction projects. International Journal of Sustainable Construction Engineering and Technology, 12 (1). pp. 170-178. ISSN 2180-3242

Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. and Suzuki, A. and Taguchi, S. and Mitomi, O. (2016) Spot size converter using mask-Transfer self-written waveguide method for optical interconnection. In: 2016 IEEE CPMT Symposium Japan, ICSJ 2016; Kyoto; Japan, 7 November 2016 through 9 November 2016, Kyoto; Japan.

Baharudin, N. A. and Fujikawa, C. and Mitomi, O. and Suzuki, A. and Taguchi, S. and Mikami, O. and Ambran, S. (2017) Tapered spot size converter by mask-transfer self-written technology for optical interconnection. IEEE Photonics Technology Letters, 29 (12). pp. 949-951. ISSN 1041-1135

Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. (2016) Self-written waveguide (SWW) optical pin for high optical coupling in multi-layer printed wiring board. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Baharudin, Nurul Atiqah and Ambran, Sumiaty and Osamu, Mikami and Fujikawa, Chiemi (2015) Optical coupling for multi-layer printed wiring board by selfwritten waveguide. In: Malaysia-Japan Joint International Conference 2015, 13-15 Nov, 2015, Japan.

Baharudin, Nurul Atiqah and Fujikawa, Chiemi and Mikami, Osamu and Idrus, Sevia M. and Ambran, Sumiaty (2019) UV-curable resin microlenses on optical pillars for optical interconnect. Japanese Journal of Applied Physics, 58 (SJ). SJJB02-SJJB02. ISSN 0021-4922

Baharun, Sabariah and Wan Daud, Wan Asma Awatif and Mohd. Yusof, Mohd. Rashid and Maan, Normah (2015) Application of graph theory on the relationship of the parameters affecting the dioxin furan emission in incineration process. Advance in Mathematics and Statistical Sciences . pp. 357-365.

Bahiuddin, Bahiuddin and Mazlan, S. A. and Shapiai, Shapiai and Imaduddin, F. and Ubaidillah, Ubaidillah and Choi, Seung Bok (2018) Constitutive models of magnetorheological fluids having temperature-dependent prediction parameter. Smart Materials and Structures, 27 (9). ISSN 0964-1726

Bahiuddin, I. and Fatah, A. Y. A. and Mazlan, S. A. and Shapiai, M. I. and Imaduddin, F. and Ubaidillah, Ubaidillah and Utami, D. and Muhtazaruddin, M. N. (2019) Comparing the linear and logarithm normalized extreme learning machine in flow curve modeling of magnetorheological fluid. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). pp. 1065-1072. ISSN 2502-4752

Bahiuddin, I. and Imaduddin, F. and Mazlan, S. A. and Shapiai, M. I. and Ubaidillah, U. and Nazmi, N. and Mohamad, N. (2021) A machine learning approach to estimate magnetorheological suspension composition based on magnetic field dependent-rheological properties. Smart Materials and Structures, 30 (10). ISSN 0964-1726

Bahiuddin, I. and Mazlan, S. A. and Imaduddin, F. and Ubaidillah, Ubaidillah (2017) A new control-oriented transient model of variable geometry turbocharger. Energy, 125 . pp. 297-312. ISSN 0360-5442

Bahiuddin, I. and Wibowo, S. B. and Syairaji, M. and Putra, J. T. and Pandito, C. A. and Maulana, A. F. and Prastica, R. M. S. and Nazmi, N. (2021) A systematic approach to predict the behavior of cough droplets using feedforward neural networks method. Fluids, 6 (2). ISSN 2311-5521

Bahiuddin, Irfan and Imaduddin, Fitrian and Mazlan, Saiful Amri and Ariff, Mohd. H. M. and Mohmad, Khairunnisa and Ubaidillah, Ubaidillah and Choi, Seung-Bok (2021) Accurate and fast estimation for field-dependent nonlinear damping force of meandering valve-based magnetorheological damper using extreme learning machine method. Sensors and Actuators, A: Physical, 318 . p. 112479. ISSN 0924-4247

Bahiuddin, Irfan and Mazlan, Saiful A. and Shapiai, Mohd. I. and Nordin, Nur A. and Imaduddin, Fitrian and Ubaidillah, Ubaidillah and Nordin, Nur Azmah and Adiputra, Dimas (2020) Field dependent-shear stress prediction of magnetorheological fluid using an optimum extreme learning machine model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 89-96. ISSN 2289-7879

Bahiuddin, Irfan and Mazlan, Saiful Amri and Imaduddin, Fitrian and oYamasaki, Nobuhik and Yamasaki, Nobuhiko and Ubaidillah, Ubaidillah (2021) A transient model of a variable geometry turbocharger turbine using a passive actuator. Arabian Journal for Science and Engineering, 46 (3). pp. 2565-2577. ISSN 2193-567X

Bahrain, S. H. K. and Mahmud, J. and Rasid, Z. A. and Madete, J. (2017) Synthesization and microstructural analysis of Arenga pinnata fibres and silicone rubber for new silicone biocomposite material. Journal of Mechanical Engineering, SI 4 (4). pp. 15-30. ISSN 1823-5514

Bajuri, Muzairiah (2003) Pengurusan fasiliti bagi pelajar kurang upaya di institusi pengajian tinggi awam : kajian kes : Universiti Teknologi Malaysia, Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Bakar, N. A. A. and Deraman, Zakaria and Tarmiji, Mohamad Fadzli and Yusoff, Rohani and Kama, N. (2020) Workplace digitalization in public sector organization towards operational effectiveness: Current landscape, issues and challenges. International Journal of Innovation in Enetrprise System, 4 (1). pp. 78-83. ISSN 2580-3050

Bakar, N. A. A. and Harihodin, S. and Kama, N. (2017) A priority based enterprise architecture implementation assessment model: an analytic hierarchy process (AHP) approach. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-3). pp. 121-125. ISSN 2180-1843

Bakar, N. A. A. and Ramli, W. M. W. and Hassan, N. H. (2019) The internet of things in healthcare: an overview, challenges and model plan for security risks management process. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 414-420. ISSN 2502-4752

Bakar, N. H. A. and Jusoh, A. and Ahmad, M. F. and Noor, M. J. M. M. and Norzilah, A. (2016) A spatial nutrient distribution due to seabass aquaculture activities at Setiu, Terengganu, Malaysia. Journal of Fisheries and Aquatic Science, 11 (5). pp. 332-348. ISSN 1816-4927

Bakar, Nur Azaliah A. and Kama, Nazri and Harihodin, S. (2015) A systematic review of enterprise architecture establishment process. In: Proceedings of the 5th International Conference on Computing and Informatics, ICOCI 2015, 11 - 13 August 2015, Istanbul, Turkey.

Baker, A. M. A. and Alam, M. S. and Tanrioven, M. and Ahmad, H. B. (2005) Electromagnetic compatibility analysis in buildings affected by lightning strike. Electric Power Systems Research, 73 . pp. 197-204. ISSN 03787796

Bakhary, NorHisham and Hao, Hong and Deeks, Andrew J. (2010) Structure damage detection using neural network with multi-stage substructuring. Advances in Structural Engineering, 13 (1). pp. 1-16. ISSN 1369-4332

Bakhtiari, Majid and Zainal, Anazida and Bakhtiari, Saeid and Mammi, Hazinah Kutty (2015) Lightweight symmetric encryption algorithm in big data. International Journal of Advances in Soft Computing and its Applications, 7 (SI3). pp. 45-55. ISSN 2074-8523

Bakri, Muhd. Shahril (2001) Accomodating telecenters into cybercafes : a case study in Johor Bahru central municipality. Masters thesis, Universiti Putra Malaysia, Faculty of Education.

Balakrishnan, Santhirakumar (2003) Performance of whisker reinforced ceramic insert during hard turning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir (2018) "New residential construction building and composite post and beam structure toward global warming mitigation". Environmental Progress & Sustainable Energy, 37 (4). pp. 1394-1402. ISSN 1944-7442

Balasundram, Vekes and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Isha, Ruzinah and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2020) Catalytic upgrading of biomass-derived pyrolysis vapour over metal-modified HZSM-5 into BTX: a comprehensive review. Biomass Conversion and Biorefinery . p. 28. ISSN 2190-6815

Balasundram, Vekes and Kamarul Zaman, Khairunnisa and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Isha, Ruzinah and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2020) Optimizing the catalytic performance of Ni-Ce/HZSM-5 catalyst for enriched C6–C8 hydrocarbons in pyrolysis oil via response surface methodology. Biomass Conversion and Biorefinery . ISSN 2190-6815

Balasundram, Vekes and Kamarul Zaman, Khairunnisa and Ibrahim, Norazana and Md. Kasmani, Rafiziana and Isha, Ruzinah and Abd. Hamid, Mohd. Kamaruddin and Hasbullah, Hasrinah (2020) Thermogravimetric kinetics of catalytic pyrolysis of sugarcane bagasse over nickel-cerium/HZSM-5 catalyst. Journal of Advanced Research in Materials Science, 64 (1). pp. 1-17. ISSN 2289-7992

Balavandy, Sepideh Keshan and Shameli, Kamyar and Abidin, Z. Z. (2015) Rapid and green synthesis of silver nanoparticles via sodium alginate media. International Journal of Electrochemical Science, 10 (1). pp. 486-497. ISSN 1452-3981

Bamidele, Ameen Aliu and Kamardin, Kamilia and Abd. Aziz, Nur Syazarin Natasha and Mohd. Sam, Suriani and Ahmed, Irfanuddin Shafi and Azizan, Azizul and Bani, Nurul Aini and Mad Kaidi, Hazilah (2019) Non-intrusive driver drowsiness detection based on face and eye tracking. International Journal of Advanced Computer Science and Applications, 10 (7). pp. 549-569. ISSN 2158-107X

Bani, N. A. (2017) Comparison of the performance of artificial neural networks and fuzzy logic for recognizing different partial discharge sources. Energies, 10 (7). ISSN 1996-1073

Bani, N. A. and Abdul Malek, Z. and Muhammad Sukki, F. and Abubakar Mas'Ud, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, N. A. and Abdul-Malek, Z. and Aris, S. A. M. and Jalil, S. Z. A. and Muhtazaruddin, M. N. and Kaidi, H. M. and Rahman, S. A. S. A. and Muhammad-Sukki, F. and Mas'Ud, A. A. and Abu-Bakar, S. H. and Rey, J. A. A. (2017) Frequency dependence of electroluminescence measurement in LDPE. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1406-1413. ISSN 2088-8708

Bani, N. A. and Abdul-Malek, Z. and Muhammad-Sukki, F. and Abubakar MasUd, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, Nurul Aini and Hassan, Mohamad Zaki and Mad Kaidi, Hazilah and Muhtazaruddin, Mohd. Nabil and Sarip, Shamsul and Saleh, Safiza and Mohd. Izhar, Mohd. Azri and Mohd. Aris, Siti Armiza and Abd. Jalil, Siti Zura and Mohamed Rashidi, Ahmad Hadi (2018) Feasibility study of a low cost saltwater lamp for rural area. International Journal of Integrated Engineering, 10 (7). pp. 167-176. ISSN 2229-838X

Bani, Nurul Aini and Musa, Rafizah and Dziyauddin, Rudzidatul Akmam and Hassan, Mohamad Zaki and Usman, Sahnius and Mad Kaidi,, Hazilah and Mohd. Hashim, Nor Fazilah and MasUd, Abdullahi Abubakar and Sukki, Firdaus Muhammad and Abu-Bakar, Siti Hawa (2018) A pilot study of malnutrition among elderly in a Malaysia elderly care centre - part i: assessment of handgrip strength measurement. In: 2nd International Conference on BioSignal Analysis, Processing and Systems, ICBAPS 2018, 24 July 2018 - 26 July 2018, Kuching, Sarawak, Malaysia.

Bankole, Bello Abdulazeez (2011) Selection of optimum stationary crusher location for a quarry using geographical information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Baqutayan, Shadiya and Md. Salimun, Husni Alhan (2018) Evaluation on national biotechnology policy (NBP) 2005: Towards achieving 20 global companies in NBP phase III. Journal of Commercial Biotechnology, 24 (2). pp. 21-26. ISSN 1462-8732

Baqutayan, Shadiya Mohamed S. (2020) Women empowerment is needed to boost gender equality in Malaysia. Current Research Journal of Social Sciences and Humanities, 3 (1). pp. 96-108. ISSN 2581-8422

Baradaran, H. and Ng., C. R. and Gupta, A. and Noor, N. M. and Al-Dasuqi, K. W. and Mtui, E. E. and Rijal, O. M. and Giannopoulos, A. and Nicolaides, A. and Laird, J. R. and Saba, L. and Suri, J. S. (2017) Extracranial internal carotid artery calcium volume measurement using computer tomography. International Angiology, 36 (5). pp. 445-461. ISSN 0392-9590

Baruah, S. and Chuprat, Suriayati (2011) Real-time divisible load theory : incorporating computation costs. In: The 17th IEEE International Conference On Embedded And Real-Time Computing Systems And Applications (Rtcsa 2011).

Basha, M. and Sidik, N. A. C. (2018) Numerical predictions of laminar and turbulent forced convection: Lattice Boltzmann simulations using parallel libraries. International Journal of Heat and Mass Transfer, 116 . pp. 715-724. ISSN 0017-9310

Bashardoost, M. and Mohd. Rahim, M. S. and Saba, T. and Rehman, A. (2017) Replacement attack: a new zero text watermarking attack. 3D Research, 8 (1). ISSN 2092-6731

Batool, Uzma and Shapiai, Mohd. Ibrahim and Ismail, Nordinah and Fauzi, Hilman and Salleh, Syahrizal (2020) Oversampling based on data augmentation in convolutional neural network for silicon wafer defect classification. In: 19th International Conference on New Trends in Intelligent Software Methodologies, Tools and Techniques, SoMeT 2020, 22 - 24 September 2020, Virtual, Online.

Bayat, Ali Esfandyari and Junin, Radzuan and Kharrat, Riyaz and Hejri, Shahab (2015) Evaluation of vapour extraction process and its prospect as an enhanced oil recovery method. International Journal of Oil, Gas and Coal Technology, 9 (4). pp. 394-421. ISSN 1753-3317

Bee, Soo Tueen and Hassan, Azman and Abu Bakar, Aznizam (2007) Mechanical properties of talc and calcium carbonate filled PVC. The Proceedings of Regional Annual Fundamental Science Seminar (RAFSS) 2007 . pp. 22-31.

Behrooz, Farinaz and Yusof, Rubiyah and Mariun, Norman and Khairuddin, Uswah and Ismail, Zool Hilmi (2019) Designing intelligent MIMO nonlinear controller based on fuzzy cognitive map method for energy reduction of the buildings. Energies, 12 (14). p. 2713. ISSN 1996-1073

Bejarbaneh, Behnam Yazdani (2012) Shear strength parameters of shale based on triaxial compression test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bejarbaneh, Elham Yazdani (2012) Multi-optimization of PID controller parameters using stochastic search techniques for rotary inverted pendulum system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bekibayev, T. T. and Zhapbasbayev, U. K. and Ramazanova, G. I. and Minghat, A. D. and Bosinov, D. Zh. (2021) Simulation of oil pipeline shutdown and restart modes. Kompleksnoe Ispolzovanie Mineralnogo Syra (Complex Use of Mineral Resources), 316 (1). pp. 15-23. ISSN 2224-5243

Benk, Serkan and Budak, Tamer (2016) The impact of religiosity on tax compliance among Turkish self-employed taxpayers. Religions, 7 (4). ISSN 2077-1444

Beriache, M’hamed and Merzouk, Djelloul Saïh and Che Sidik, Nor Azwadi (2018) Assessing and quality tests of new PVC electrical cables outer sheath by accelerated thermal ageing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 44 (1). pp. 73-84. ISSN 2289-7879

Besser, Katrin and Malyon, Graham P. and Eborall, William S. and Paro da Cunha, Giovanni and Filgueiras, Jefferson G. and Dowle, Adam and Garcia, Lourdes Cruz and Page, Samuel J. and Dupree, Ray and Kern, Marcelo and Gomez, Leonardo D. and Li, Yi and Elias, Luisa and Sabbadin, Federico and Mohamad, Shaza E. and Pesante, Giovanna and Steele-King, Clare and Ribeiro de Azevedo, Eduardo and Polikarpov, Igor and Dupree, Paul and Cragg, Simon M. and Bruce, Neil C. and McQueen-Mason, Simon J. (2018) Hemocyanin facilitates lignocellulose digestion by wood-boring marine crustaceans. Nature Communications, 9 (5125). pp. 1-14. ISSN 2041-1723

Bhatti, Inamullah (2012) Separation of carbon dioxide from natural gas by emulsion liquid membrane in rotating disc contractor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bhatti, T. and Md Husin, M. (2019) An investigation of the effect of customer beliefs on the intention to participate in family takaful schemes. Journal of Islamic Marketing, 11 (3). pp. 709-727. ISSN 1759-0833

Bidin, Noriah (2002) Teknologi laser. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0251-6

Binwahlan, Mohammed Salem and Salim, Naomie and Suanmali, Ladda (2009) MMI diversity based text summarization. International Journal of Computer Science and Security, 3 (1). pp. 23-33. ISSN 1985-1553

Binwahlan, Mohammed Salem and Salim, Naomie and Suanmali, Ladda (2009) Swarm diversity based text summarization. In: Neural Information Processing. Springer, Berlin/ Heidelberg, pp. 216-268. ISBN 978-3-642-10682-8

Birima, A. H. and Ahmed, A. T. and Noor, M. J. M. M. and Sidek, L. M. and Muda, Z. C. and Wong, L. S. (2015) Application of salt extracted peanut seeds in the pretreatment of palm oil mill effluent (POME). Desalination and Water Treatment, 55 (8). pp. 2196-2200. ISSN 1944-3994

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) Artificial neural network based controller for line starting performance synchronous motor of a conveyor system using field oriented self-controlled. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2015, 24 November 2015 through 25 November 2015, Kuala Lumpur; Malaysia.

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) A fuzzy logic controller to line starting performance synchronous motor for a crane system using vector control. Jurnal Teknologi, 78 (6-6). pp. 81-86. ISSN 0127-9696

Bohari, Sharifah Norashikin and Saad, Siti Nor Maizah and Marzukhi, Faradina and Rahim, Ashnita and Ahmad Darim, Ainul Dzahira (1998) Residential property valuation using GIS. Buletin Geoinformasi, 1 (4).

Borhanuddin, N. N. and Mohammad, R. and Othman, N. and A. Kadir, Z. (2020) Attendance management system assessment and sustainability performance at a telecommunication operation centre in Malaysia. Journal of Environmental Treatment Techniques, 8 (1). pp. 471-480. ISSN 2309-1185

Borhanuddin, Nooramirah Najwa and Mohammad, Roslina and A. Kadir, Zuritah (2019) Improvement of attendance management system at a telecommunication operation centre in Malaysia. Open International Journal of Informatics, 7 (2). pp. 22-32. ISSN 2289-2370

Boroujeni, Arash Khosravi (2012) Sensorless speed control of permanent magnet synchronous motor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bouguerra, Khalid and Wah, Lim Yaik and Ali, Kherun Nita (2020) A preliminary implementation framework of building information modelling (BIM) in the Algerian AEC industry. International Journal of Built Environment and Sustainability, 7 (3). pp. 59-68. ISSN 2289-8948

Bruun, Esben Wilson and Hauggaard-Nielsen, Henrik and Ibrahim, Norazana and Egsgaard, Helge and Ambus, Per Lennart and Jensen, Peter Arendt and Kim, Dam-Johansen (2011) Influence of fast pyrolysis temperature on biochar labile fraction and short-term carbon loss in a loamy soil. Biomass and Bioenergy, 35 (3). pp. 1182-1189. ISSN 0961-9534

Buang, Nor Aziah and Abd. Majid, Zaiton and Sulaiman, Yusran and M. Sanip, Suhaila and Ismail, Ahmad Fauzi (2005) Effect of addition of Ni metal catalyst onto the Co and Fe supported catalysts for the formation of carbon nanotubes. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Buang, Nor Aziah and M. Sanip, Suhaila and Omar, Juzailah and Tee, Jia Chee and Ismail, Ahmad Fauzi (2005) Carbon nanotubes synthesis using alumina template. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Buang, Nor Aziah and M. Sanip, Suhaila and Sulaiman, Yusran and Ismail, Ahmad Fauzi (2005) Synthesis of carbon nanotubes (CNTs) grown over suppported catalyst and their adsorption properties. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT 2005) and 9th International Conference On Advanced Materials (ICAM 2005), 3-8 July 2005, Singapore.

Buchori, Imam (2011) Cost analysis framework for sediment management in reservoir infrastructure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bukhori, I. and Ismail, Z. H. (2017) Detection of kidnapped robot problem in Monte Carlo localization based on the natural displacement of the robot. International Journal of Advanced Robotic Systems, 14 (4). pp. 1-6. ISSN 1729-8806

Bukhori, I. and Ismail, Z. H. (2017) Performance comparisons of particle-based and similarity measure-based kidnapping detectors in Monte Carlo localization. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2536-2542. ISSN 0975-1033

Bunday, Brian D. and Ismail, Zuhaimy (1994) Asas pengaturcaraan linear. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0020–3

Buniya, M. K. and Othman, I. and Sunindijo, R. Y. and Kashwani, G. and Durdyev, S. and Ismail, S. and Afari, M. F. A. and Li, H. (2021) Critical success factors of safety program implementation in construction projects in Iraq. International Journal of Environmental Research and Public Health, 18 (16). ISSN 1661-7827

Buniya, Mohanad Kamil and Othman, Idris and Durdyev, Serdar and Sunindijo, Riza Yosia and Ismail, Syuhaida and Kineber, Ahmed Farouk (2021) Safety program elements in the construction industry: The case of Iraq. International Journal of Environmental Research and Public Health, 18 (2). pp. 1-13. ISSN 1661-7827

Burhannuddin, Nurul Liyana and Nordin, Nur Azmah and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Choi, Seung Bok and Kuwano, Noriyuki and Nazmi, Nurhazimah and Johari, Norhasnidawani (2020) Effects of corrosion rate of the magnetic particles on the field-dependent material characteristics of silicone based magnetorheological elastomers. Smart Materials and Structures, 29 (8). pp. 1-15. ISSN 0964-1726

Burhannuddin, Nurul Liyana and Nordin, Nur Azmah and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Kuwano, Noriyuki and Mohd. Jamari, Siti Khumaira and Ubaidillah, Ubaidillah (2021) Physicochemical characterization and rheological properties of magnetic elastomers containing different shapes of corroded carbonyl iron particles. Scientific Reports, 11 (1). p. 868. ISSN 2045-2322

Burhannuddin, Nurul Liyana and Zolkifli, Nur Nabila Balqis and Nordin, Nur Azmah and Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Yahaya, Hafizal (2020) Effect of corroded plate-like iron particles on the rheological properties of magnetorheological elastomer. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Burhanuddin, M. A. and Ahmad, A. R. and Desa, Mohammad Ishak (2007) Maintenance decision making model using multiple criteria analysis for small medium industries. Jurnal Teknologi Maklumat, 19 (2). pp. 35-46. ISSN 0128-3790

Busalim, Abdelsalam H. and Masrom, Maslin and Wan Zakaria, Wan Normeza Binti (2019) The impact of facebook addiction and self-esteem on students academic performance: a multi-group analysis. Computers and Education, 142 . pp. 1-14. ISSN 0360-1315

Butt, S. and Ramakrishnan, S. and Chohan, M. A. and Punshi, S. K. (2019) Prediction of Malaysian exchange rate using microstructure fundamental and commodities prices: a machine learning method. International Journal of Recent Technology and Engineering, 8 (2). pp. 987-993. ISSN 2277-3878

Butt, Shamaila and Ramakrishnan, Suresh and Loganathan, Nanthakumar and Chohan, Muhammad Ali (2020) Evaluating the exchange rate and commodity price nexus in Malaysia: evidence from the threshold cointegration approach. Financial Innovation, 6 (1). p. 22. ISSN 2199-4730

Buyong, Taher and Ismail, Suriatini and Sipan, Ibrahim @ Atan and Hashim, Mohd. Ghazali and Adan, Mohd Nurul Fakhri (2008) Kriging In Mass Appraisal For Rating. In: International Real Estate Research Symposium (IRERS) 2008 Benchmarking, Innovating and Sustaining Real Estate Market Dynamics, 28 – 30th April 2008, PWTC Kuala Lumpur, Malaysia. (Unpublished)

Buyong, Taher and Daud, Abdullah (2001) The conjugate gradient method for the adjustment of cadastral data in GIS. Project Report. UTM. (Unpublished)

Buyong, Taher and Ismail, Suriatini (2001) The application of low cost GIS package for property valuation. Project Report. UTM. (Unpublished)

Buyong, Taher and Tang, Chuoon Mun (2001) Soil erosion analysis using prime meridian GIS package. Project Report. UTM. (Unpublished)

C

Centeno, Anthony and Aid, Siti Rahmah and Xie, Fang (2018) Infra-Red Plasmonic Sensors. Chemosensors, 6 (1). p. 4. ISSN 2227-9040

Chan, J. Z. and Ali, R. Rasit and Shameli, K. and Salleh, M. S. N. and Lee, K. X. and Mohamed Isa, E. D. (2020) Green synthesis of gold nanoparticles using aqueous extract of Clitoria Ternatea flower. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

C., Rizos and S., Lim and T. A., Musa and S., Ses and S., Amir and K., Zhang (2009) Atmospheric remote sensing using GNSS in the Australasian region: from temperate climates to the tropics. In: Proceeding of the 2009 IEEE International Geoscience & Remote Sensing Symposium, 2009, Cape Town, Afrika Selatan.

Caccetta, Louis and Nordin, Syarifah Zyurina (2013) Mixed integer programming model for scheduling in unrelated parallel processor system with priority consideration. Numerical Algebra, Control and Optimization (NACO) . ISSN 2155-3297

Campbell, Grant M and Fang, Chaoying and Muhammad, Ida Idayu (2007) On predicting roller milling performance V1. effect of kernel hardness and shape on the particle size distribution from first break milling of wheat. IChemE Journal: Food and Products Processing, 85 . pp. 7-23. ISSN 0960-3085

Cazaux, Jacques and Kuwano, Noriyuki and Sato, Kaoru (2013) Backscattered electron imaging at low emerging angles: a physical approach to contrast in LVSEM. Ultramicroscopy, 135 . pp. 43-49. ISSN 0304-3991

Chaeikar, Saman Shojae and Zamani, Mazdak and Abdul Manaf, Azizah and M. Zeki, Akram (2018) PSW statistical LSB image steganalysis. Multimedia Tools and Applications, 77 (1). pp. 805-835. ISSN 1380-7501

Chai, Khin Chung and Abu Bakar, Nooh (2001) The Relevancy Of Just-In-Time (JIT) Concept In Government Purchasing. Jurnal Teknololgi A, 35 (A). pp. 1-8. ISSN 0127-9696

Chan, Fook Kiong and Ismail, Ahmad Fauzi and M. Yusof, M. Rashid (2000) Development of membrane oxygen enrichment system for wastewater aeration system. In: Malaysian Science & Technology Congress (MSTC) 2000 , 7-9 November 2000, Genting Highlands. (Unpublished)

Chan, Jun Hoa and Foo, Dominic C. Y. and Kumaresan, Sivakumar and Abdul Aziz, Ramlan and Abu Hassan, Mohd. Ariffin (2005) Process modelling of a PVC production plant. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Chan, Kar Fei and Mohd. Zaid, Mohd. Hafiz and Mamat, Md. Shuhazlly and Shahira Liza, Shahira Liza and Tanemura, Masaki and Yaakob, Yazid (2021) Recent developments in carbon nanotubes-reinforced ceramic matrix composites: A review on dispersion and densification techniques. Crystals, 11 (5). p. 457. ISSN 2073-4352

Chan, Kar Fei and Mohd. Zaid, Mohd. Hafiz and Shahira Liza, Shahira Liza and Matori, Khamirul Amin and Mamat, Md. Shuhazlly and Hazan, Mohammad Adib and Yaakob, Yazid (2020) Effect of CNT on microstructural properties of Zn2SiO4/CNT composite via dry powder processing. Materials Research Express, 7 (10). p. 105601. ISSN 2053-1591

Chan, Kit Hie and Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2005) Industrial applications of silica-based gas adsorbents. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Chan, Y. H. and Syed Abu Bakar, Syed Abdul Rahman (2004) Face detection system based on feature-based chrominance colour information. In: Proceedings International Conference On Computer Graphics, Imaging And Visualization. International Conference on Computer Graphics Imaging and Visualization . IEEE, USA, pp. 153-158. ISBN ISBN: 0769521789; 978-076952178-7

Chan Hong Kit, P. and Abdul Rasid, S. Z. and Md. Husin, M. (2016) The impacts of Malaysian managed care on doctor-patient relationships, ethical practice of medicine, and quality of care: a study on primary care physicians’ perception. International Journal of Healthcare Management, 9 (2). pp. 119-126. ISSN 2047-9700

Chang, Yvonne S. H. and Yaacob, Zulkefli and Mohsin, Rahmat and Abdul Majid, Zulkifli (2005) Effect of injection position on throttle body injection mixer for compressed natural gas motorcycle. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Chang, Siaw Hui (2009) Formalisation of partnering as a collaborative procurement method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chang, Siu Hua and Yaacob, Zulkefli and Mohsin, Rahmat (2007) Effect of various manifold absolute pressures and air flowrates on throttle body injection mixer in compressed natural gas motorcycle. Journal of Chemical and Natural Resources Engineering, 1 . pp. 40-49. ISSN 1823-5255

Che Amat, Rohayah (2018) Inheriting the city: Historic urban landscape of George Town UNESCO World Heritage Site. Planning Malaysia, 16 (1). pp. 205-210. ISSN 1675-6215

Che aron, Zamree and Abdalla, Aisha Hassan and Abdullah, Khaizuran and Hassan, Wan Haslina and Rahman, Md. Arafatur (2015) A robust on-demand routing protocol for cognitive radio Ad Hoc networks. In: International Conference on Mobile andWireless Technology, ICMWT 2015, 23 - 25 June 2015, Bangkok, Thailand.

Che Aron, Zamree and Hassan Abdalla, Aisha and Abdullah, Khaizuran and Hassan, Wan Haslina and Rahman, Md. Arafatur (2015) Performance evaluation of joint path and spectrum diversity based routing protocol in Cognitive Radio Ad Hoc Networks under critical conditions. Research Journal of Applied Sciences, Engineering and Technology, 10 (6). pp. 694-700. ISSN 2040-7459

Che Awang, Mohamad Saupi and Daud, Abdullah (1994) Keperluan Pengeluaran Almanak * Falak Syarie Kebangsaan. Buletin Ukur, 5 (1). pp. 36-41. ISSN 0128-4274

Che Hasan, Rozaimi and Md. Said, Najhan and Khalil, Idham (2021) Seafloor habitat mapping using machine learning and underwater acoustic sonar. In: International Conference on Computational Intelligence in Machine Learning, ICCIML 2021, 1 - 2 June 2021, Virtual, Online.

Che Husin, S. M. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2019) Implementing sustainability in existing building through retrofitting measures. International Journal of Civil Engineering and Technology, 10 (1). pp. 1450-1471. ISSN 0976-6308

Che Ismail, Che Mohd. Arman (2013) Effects of temperature and salinity on adsorption in alkaline-surfactant flooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Che Ismail, Elna Herawati and Othman, Nooraini (2015) Psychological approach in managing muscular dystrophy patients in Malaysia. Iranian Journal of Public Health, 44 (3). pp. 418-419. ISSN 0304-4556

Che Morat, Bashirun (2012) Non-invasive evaluation of hydrogen peroxide concentrations in a drinking bottle by near-infrared spectrometry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Che Puan, Othman and Mohd. Yunus, Mohd. Zulkifli and Sajjadi, Seyed Mahdi and Navaz, Taha Mehman (2015) Determining the best highway candidate based on cost and safety using the analytic hierarchy process. In: Proceedings of 1st Icril-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr, 2015, Kuala Lumpur, Malaysia.

Che Razali, Che Munira and Abdullah, Shahrum Shah and Parnianifard, Amir and Faruq, Amrul (2020) Adaptive infill sampling strategy for metamodeling: Challenge and future research directions. Bulletin of Electrical Engineering and Informatics, 9 (5). pp. 2020-2029. ISSN 2089-3191

Che Ros, Faizah and Jaafar, Aminah Syakirah (2018) Flood forecasting model for Kelantan river basin, Malaysia using ifas and getflows. In: The 13th International Conference on Hydroscience and Engineering.

Che Sidik, Nor Azwadi (2007) The development of thermal lattice Boltzmann models in incompressible limit. The development of thermal lattice Boltzmann models in incompressible limit, 3 (2). pp. 193-202.

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2007) Two-phase flow simulation with lattice Boltzmann method. Jurnal Mekanikal (24). pp. 68-79. ISSN 0127-3396

Che Sidik, N. A. and Kianpour, E. (2019) Effects of row trench holes geometries on an endwall cooling. CFD Letters, 11 (6). pp. 27-38. ISSN 2180-1363

Che Sidik, N. A. and Mahmud Jamil, M. and Aziz Japar, W. M. A. and Muhammad Adamu, I. (2017) A review on preparation methods, stability and applications of hybrid nanofluids. Renewable and Sustainable Energy Reviews, 80 . pp. 1112-1122. ISSN 1364-0321

Che Sidik, Nor Azwadi and Kean, Tung Hao and Chow, Hoong Kee and Rajaandra, Aravinthan and Rahman, Shiblur and Kaur, Jesbains (2018) Performance enhancement of cold thermal energy storage system using nanofluid phase change materials: A review. International Communications in Heat and Mass Transfer, 94 . pp. 85-95. ISSN 0735-1933

Che Sidik, Nor Azwadi and Ng, Chee Horng (2009) Lattice boltzmann modelling of microchannel flow. Journal of Materials Science and Engineering, 3 (12).

Che Sidik, Nor Azwadi and Samion, Syahrullail (2009) Lattice Boltzman numerical prediction of flow behavior downstream of cylinder blockage at various Reynolds numbers. World Academy of Science, Engineering and Technology, 26 . pp. 7-11. ISSN 2010-376X (Prints); 2010-3778 (Electronic)

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2006) Simplified thermal lattice boltzmann in incompressible limit. International Journal of Modern Physics B, 20 (17). pp. 2437-2449. ISSN 0217-9792

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2007) Three-dimensional thermal lattice boltzman simulation of natural convection in a cubic cavity. International Journal of Modern Physics B, 21 . pp. 87-96. ISSN 0217-9792

Che Yob, Rashidah and Seman, Norhudah (2015) An accurate operation of wideband multi-port reflectometer with new calibration method implementing least mean square for microwave imaging application. Jurnal Teknologi, 73 (3). pp. 119-125. ISSN 2180–3722

Che Yunus, Mohd Azizi and Ripin, Adnan (2001) Optimization of processing parameter for enhancing good quality of mango powder using response surface methodology. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 427-434.

Che' Man, Noordini (2006) Penilaian keberkesanan sistem kawalan pembangunan : pengalaman Jabatan Perancang Bandar, Dewan bandaraya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che' Man, Noordini and Harry, Timmermans (2015) A discrete choice model for firm location decision. In: 13th International Congress of Asian Planning Schools Association (Apsa 2015), 12-14 Aug, 2015, Johor Bahru, Johor.

Che-Aron, Z. and Abdalla, A. H. and Hassan, W. H. and Abdullah, K. and Rahman, M. A. (2015) E-D2CARP: A joint path and spectrum diversity based routing protocol with an optimized path selection for cognitive radio ad hoc networks. In: 2nd IEEE International Symposium on Telecommunication Technologies, ISTT 2014, 24 - 26 November 2014, Langkawi, Malaysia.

Chee, Chit Lai and Md. Illias, Rosli and Hassan, Osman and Kamaruddin, Kamarulzaman and Abdul Aziz, Suraini and Md. Salleh, Madihah and Wan Md. Zain, Wan Salwanis (2005) Cloning of pullulanase gene from local isolated bacteria. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Chee, Leong Lam and Mohd. Rafi, Muhamad Firdaus and Mohd. Fishol, Mohamad Fahmi Hazwan and Mohd. Yudin, Muhamad Bakhtiar and Michi, Aldi and Sriprachuabwong, Chakrit and Tuantranont, Adisorn and Bagus Wicaksono, Dedy Hermawan (2015) Graphene-based flexible circuit on cotton fabric using wax patterning method. In: Advanced Materials Research, 26-28 Sept, 2015, Indonesia.

Chee, Zhou Kam and Beng, Ahmad Hong Kueh (2015) Towards sustainable polymeric materials: zero waste, green and self-healing. Jurnal Teknologi, 74 (4). pp. 159-163. ISSN 0127-9696

Chelliapan, Shreeshivadasan and Idris, Mohamed Anuar (2018) Risk assessment of centralized chlorine gas system at rubber glove manufacturing plant. In: Proceeding of the 2nd Master Project Symposium.

Chelliapan, Shreeshivadasan and Sallis, Paul J. (2015) Anaerobic treatment of high sulphate containing pharmaceutical wastewater. Journal of Scientific and Industrial Research, 74 (9). pp. 526-530. ISSN 0022-4456

Chelliapan, Shreeshivadasan and Wilby, T. and Sallis, P. J. and Muhammad Yuzir, Muhamad Ali (2011) Tolerance of the antibiotic tylosin on treatment performance of an up-flow anaerobic stage reactor (UASR). Water Science and Technology, 63 (8). pp. 1599-1606. ISSN 0273-1223

Chen, C. H. and Wan Abdul Rahman, Wan Aizan (2004) Morphology and tensile property of the blow molded high density polyethylene (HDPE) and cross-linked HDPE bottles after immersion in petrol and diesel. In: 13th Scientific Conference and 14th Annual General Meeting of Electron Microscopy Society of Malaysia (EMSM), Selangor, Malaysia.

Chen, Chan Hoong and Wan Abdul Rahman, Wan Aizan and M., Mohd. Nazrul (2004) The effect of petrol and diesel on high density polyethylene (HDPE) and cross-linked HDPE bottles: tensile and thermal properties analysis. In: 2nd Colloqium on Postgraduate Research National Postgraduate Collloqium on Material, Mineral and Polymer 2004 (MAMIP 2004), Penang, Malaysia.

Cheraghi, Seyed Ali (2012) Moving object detection using registration for a moving camera platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chermahini, Siavash Hosseinpour (2010) Decolorisation of cashew leaves extract with activated carbon in tea bag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chew, Yin hoon and Lee, Chew Tin and Foo, Dominic Chwan Yee (2005) Evaluating heat integration scheme for batch production of oleic acid. In: Malaysian Science and Technology Congress (MSTC 2005), 18 - 20 April 2005, CitiTel Hotel Mid Valley, Kuala Lumpur.

Chew Sin, Cheong and Setan, Halim and Majid, Zulkepli (2009) 3D modelling of buildings using topcon imaging station and image master. In: Joint 8th International Symposium and Exhibition on Geoinformation 2009 & ISPRS Symposium on Spatial Decision Support System and LBS 2009, 2009, Crowne Plaza Mutiara Hotel, Kuala Lumpur.

Chia, Yee Ooi (2008) Design for testability I: from full scan to partial scan. In: Advances In Microelectronics. Penerbit UTM, Skudai, Johor Bahru, pp. 94-121. ISBN 978-983-52-0654-2

Chia, Yee Ooi and Paraman, Norlina (2008) Design for testability II: from high level perspective. In: Advances In Microelectronics. Penerbit UTM, Skudai, Johor Bahru, pp. 122-136. ISBN 978-983-52-0654-2

Chieng, Y. Y. and Kamarudin, K. S. N. and Mat, Hanapi and Hamdan, Halimaton (2005) Study of N2 adsorption on metal oxides modified Na-Y zeolite: equilibrium and kinetic. In: MSA Golden Jubilee International Science Congress (ISC) 2005, August 3-6, 2005, Putra World Trade Centre, Kuala Lumpur.

Chieng, Y. Y. and Kamarudin, Khairul Sozana Nor and Hamdan, Halimaton and Mat, Hanapi (2005) FT-IR study of N2 adsorption on ZnO and HgO modified Na-Y zeolite adsorbents. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Chieng, Yu Yuan and Kamarudin, Khairul Sozana Nor and Hamdan, Halimaton and Mat, Hanapi (2004) Gas adsorption capacity of metal oxide modified zeolite adsorbents. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-121.

Chin, Hon Huin and Varbanov, Petar Sabev (2021) Enhanced Cascade Table Analysis to target and design multi-constraint resource conservation network. Computers and Chemical Engineering, 148 . p. 107262. ISSN 0098-1354

Chin, Hon Huin and Varbanov, Petar Sabev and Liew, Peng Yen and Klemeš, Jirí Jaromír (2021) Pinch-based targeting methodology for multi-contaminant material recycle/reuse. Chemical Engineering Science, 230 . p. 116129. ISSN 0009-2509

Ching, Yee Yong and Sudirman, Rubita and Kim, Mey Chew (2019) Position and shape estimation using double integration of acceleration. e-Bangi, 16 (3). pp. 1-10. ISSN 1823-884x

Chiong, Meng Choung and Rajoo, Srithar and Romagnoli, Alessandro (2015) Nozzle steam piston expander for engine exhaust energy recovery. In: SAE 2015 11th International Conference on Automotive Engineering, ICAE 2015, 30 March 2015 - 1 April 2015, Bangkok, Thailand.

Chiong, Meng Soon and Rajoo, Srithar and Romagnoli, Alessandro and Costall, Aaron W. and Martinez-Bota, Ricardo (2015) Non-adiabatic pressure loss boundary condition for modelling turbocharger turbine pulsating flow. Energy Conversion and Magement, 93 . pp. 267-281. ISSN 0196-8904

Chittooparambil, H. J. and Shanmugam, B. and Azam, S. and Kannoorpatti, K. and Jonkman, M. and Samy, G. N. (2019) A review of ransomware families and detection methods. In: 3rd International Conference of Reliable Information and Communication Technology, IRICT 2018, 23-24 Jun 2018, Kuala Lumpur, Malaysia.

Chong, Wai Liew and Md. Illias, Rosli and Mahadi, Nor Muhammad and Najimudin, Nazalan (2007) Expression of the Na+/H+ antiporter gene (g1-nhaC) of alkaliphilic bacillus sp. G1 in escherichia coli. FEMS Microbiology Letters, 276 . pp. 114-122.

Chong, K. C. and Lai, S. O. and Lau, W. J. and Thiam, H. S. and Ismail, A. F. and Zulhairun, A. K. (2017) Fabrication and characterization of polysulfone membranes coated with polydimethysiloxane for oxygen enrichment. Aerosol and Air Quality Research, 17 (11). pp. 2735-2742. ISSN 1680-8584

Chong, Mei Mei and Tan, Lian See and Che Jusoh, Nurfatehah Wahyuny and Goto, Masafumi and Sethupathi, Sumathi (2020) Potential of functionalised cellulose from oil palm biomass as nitrogen and phosphorus based nutrient adsorbent – A review. Journal Of Oil Palm Research . ISSN 1511-2780

Chong, S. C. and Wong, Kuan Yew and Lin, B. S. (2006) Criteria for measuring KM performance outcomes in organisations. Industrial Management & Data Systems, 106 (7). pp. 917-936. ISSN 0263-5577

Chong, Siaw Yah and Kassim, K. A. and Chiet, Kenny Tiong Ping and Tan, Choy Soon (2015) Static response on lime column and geotextile encapsulated lime column (GELC) stabilised marine clay under vertical load. Jurnal Teknologi, 77 (11). pp. 25-34. ISSN 0127-9696

Choo, H. S. and Ooi, C. Y. and Inoue, M. and Ismail, N. and Kok, C. H. (2019) Review of machine learning based hardware Trojan detection methods. Defence S and T Technical Bulletin, 13 (1). pp. 1-21. ISSN 1985-6571

Choo, Hau Sim and Ooi, Chia Yee and Inoue, Michiko and Ismail, Nordinah and Moghbel, Mehrdad and Kok, Chee Hoo (2020) Register-transfer-level features for machine-learning-based hardware trojan detection. IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, E103 (2). 502A-509. ISSN 0916-8508

Choon, Tan Liat and Abdul Rahman, Alias (2008) An overview of strata and stratum objects for Malaysian 3D cadastre. In: Advances toward 3D GIS. Penerbit UTM , Johor, pp. 243-260. ISBN 978-983-52-0584-19

Choong, Thomas S.Y. and Sutrasno, K. and Saidi, Hamdani and Abdul Aziz, Ramlan and Idrees, M. (1994) Analysis of temperature changes in membrane gas separation - A theoretical investigation. Buletin FKKKSA, 8 (2). pp. 15-19. ISSN 0128-0740

Choong, Thomas S.Y. and Abdul Aziz, Ramlan and Idrees, M and Saidi, Hamdani (1995) Modelling and analysis of a retentate-permeate recycle gas permeator. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A4-1.

Chow, A. W. and Ahmad, Arshad (2004) Two-stage robust estimators for product concentration in a penicillin fermentation. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Chow, Chee Siang (2012) System verilog RTL modeling with embedded assertions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chow, M. H. and Jamil, M. M. and Ros, F. C. and Yuzir, M. A. M. and Hossain, M. S. (2019) Evaluation of parameter regionalization methods for flood simulations in Kelantan river basin. International Journal of Innovative Technology and Exploring Engineering, 8 (7). pp. 313-318. ISSN 2278-3075

Chowdhury, Md. Najmul Kabir and Ismail, Ahmad Fauzi and HossenBeg, Mohammad Dalour and Rahman Khan, Maksudur and Gohari, Rasoul Jamshidi and Saidin, Mohammad Abdul Razis and Islam, Muhammad Remanul and Ong, Huei Ruey (2016) Control of biodegradability in a natural fibre based nanocomposite as a function of impregnated copper nanoparticles. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069

Chua, Lee Suan and Sarmidi, Mohamad Roji (2005) Enzymatic enantioselective acylation of sterically aromatic secondary alcohol. Developments in Chemical Engineering and Mineral Processing, 13 (5/6). pp. 605-616. ISSN 1969-1855

Chua, Lee Suan and Sarmidi, Mohamad Roji (2004) Immobilised lipase-catalysed resolution of (R,S)-1-phenylethanol in recirculated packed bed reactor. Journal of Molecular Catalysis B: Enzymatic, 28 . pp. 111-119. ISSN 1381-1177

Chua, S. Y. and Periasamy, L. A. and Goh, C. M. H. and Tan, Y. H. and Mubarak, N. M. and Kansedo, J. and Khalid, M. and Walvekar, R. and Abdullah, E. C. (2020) Biodiesel synthesis using natural solid catalyst derived from biomass waste a review. Journal of Industrial and Engineering Chemistry, 81 . pp. 41-60. ISSN 1226-086X

Chuan, Kua Hock and Bidin, Noriah (2004) Elasticity measurement using holographic interferometry double exposure technique. Jurnal Teknologi, 41 . pp. 55-64.

Chung, Hui Hui (2011) Risk assessment on safety in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chuprat, Suriayati and Mahrin, Mohd. Naz’ri and Anuar, Syahid and Ariffin, Aswami and Abd. Aziz, Fakhrul Afiq and Ahmad Darus, Muhammad Zaharudin and Adil Talib, Mohd. Zabri (2018) Malware prediction techniques: selection and implementation for integrated cyber evidence. IJCSNS International Journal of Computer Science and Network Security, 18 (8). pp. 19-27. ISSN 1738-7906

Chwan, Dominic Yee Foo and Abdul Manan, Zainuddin and Yin, Ling Tan (2005) Synthesis of maximum water recovery network for batch process systems. Journal of Cleaner Production, 13 . pp. 1381-1394. ISSN 0959-6526

Chwan, YeeFoo and Abdul Manan, Zainuddin and Mohd Yunus, Rosli and Abdul Aziz, Ramlan (2005) Synthesis of mass exchange network for batch processes - part II: minimum units target and batch network design. Chemical Engineering Science, 60 . pp. 1349-1362. ISSN 0009-2509

Colenbrander, Sarah and Gouldson, Andy and Sudmant, Andrew Heshedahl and Papargyropoulou, Effie (2015) The economic case for low-carbon development in rapidly growing developing world cities: A case study of Palembang, Indonesia. Energy Policy, 80 . pp. 24-35. ISSN 0301-4215

Colomb, Robert Micheal and Ahmad, Mohammad Nazir (2007) Merging ontologies requires interlocking instituitional worlds. Applied Ontology, 2 (1). pp. 1-12. ISSN 1570-5838

Colomb, Robert M. and Dampney, C. N. G. (2005) An approach to ontology for institutional facts in the semantic web. Information and Software Technology Volume, 47 . pp. 775-783. ISSN 09505849

Cong, Cheng Eng and Velautham, Sanjayan and Darus, Amer Nordin (2005) Solar thermal organic rankine cycle as a Renewable energy option. Solar thermal organic rankine cycle as a (20). pp. 68-77.

D

Dadkhah, Sajjad and Abdul Manaf, Azizah and Sadeghi, Somayeh (2012) Efficient digital image authentication and tamper localization technique using 3LSB watermarking. IJCSI - International Journal of Computer Science, 9 (1). pp. 1-8. ISSN 1694-0814

Dahalan, Md. Nizam and Su, Vin Cent and Ammoo, Mohd. Shar (2009) Development of a computer program for rocket aerodynmic coefficients estimation. Jurnal Mekanikal, 28 . pp. 28-43. ISSN 0127-3396

Daliman, Shaparas and Syed Abu Bakar, Syed Abdul Rahman and Busu, Ibrahim (2015) Oil palm tree enumeration based on template matching. In: World Virtual Conference on Applied Sciences and Engineering Applications (WVCASEA2015), 27-29 Mar, 2015, Johor Bahru, Johor.

Damayanti, A. and Salim, Mohd. Razman and Ujang, Zaini (2009) Finding of coefficients and oxidizable nitrogen from palm oil mill effluent (POME) for activated sludge models(ASMs). Malaysian Journal of Civil Engineering, 21 (1). pp. 32-41. ISSN 1823-7843

Damiati, S. A. and Zaki, S. A. and Rijal, H. B. and Wonorahardjo, S. (2016) Field study on adaptive thermal comfort in office buildings in Malaysia, Indonesia, Singapore, and Japan during hot and humid season. Building and Environment, 109 . pp. 208-223. ISSN 0360-1323

Damiati, Siti Aisyah and Shaikh Salim, Sheikh Ahmad Zaki and Wonorahardjo, Surjamanto and Wong, Nyuk Hien and Rijal, Hom Bahadur (2015) Comfort temperature in air conditioned office buildings: case study of Indonesia and Singapore. In: Malaysia-Japan Joint International Conference 2015 (MJJIC 2015), 13-15 Nov, 2015, Japan.

Daradkeh, Yousef Ibrahim and Tvoroshenko, Iryna and Gorokhovatskyi, Volodymyr and Abdul Latiff, Liza and Ahmad, Norulhusna (2021) Development of effective methods for structural image recognition using the principles of data granulation and apparatus of fuzzy logic. IEEE Access, 9 . pp. 13417-13428. ISSN 2169-3536

Darajeh, N. and Fard Masoumi, H. R. and Kalantari, K. and Ahmad, M. B. and Shameli, K. and Basri, M. and Khandanlou, R. (2016) Optimization of process parameters for rapid adsorption of Pb(II), Ni(II), and Cu(II) by magnetic/talc nanocomposite using wavelet neural network. Research on Chemical Intermediates, 42 (3). pp. 1977-1987. ISSN 0922-6168

Darameicikas, M. and Muhammad Sukki, F. and Abu Bakar, S. H. and Sellami, N. and Bani, N. A. and Muhtazaruddin, M. N. and Mas ud, A. A. and Ardila Rey, J. A. (2019) Improved design of a dc-dc converter in residential solar photovoltaic system. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1476-1482. ISSN 2088-8694

Das, S. and Toh, H. T. and Abu, A. H. and Das, S. and Mondal, K. and Sarkar, A. (2016) Flow in straight through labyrinth seal: a comparison of fluid structure interaction effects. Jurnal Teknologi, 78 (1). pp. 131-137. ISSN 0127-9696

Daud, Dzurllkanian @ Zulkarnain (2012) Applications of google maps, GPS and GIS in managing taxable property in local authority (case study: Majlis Bandaraya Melaka Bersejarah). In: 7th Symposium Mass Appraisal Valuation Symposium, 11th - 12th July 2012 , Kuala Lumpur, Malaysia .

Daud, Rohaizan and Ab. Rahim, Nor Zairah and Ibrahim, Roslina and Ya'acob, Suraya and Ab. Raza, Rosida (2018) Critical factors in knowledge communication of Malaysian public sector. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 80-89. ISSN 1992-8645

Daud, S. and Abd Aziz, M. S. and Chaudhary, K. T. and Bahadoran, M. and Ali, J. (2016) Sensitivity measurement of Fibre Bragg grating sensor. Jurnal Teknologi, 78 (3). pp. 277-280. ISSN 0127-9696

Daud, S. M. and Daud, S. and Rasol, Z. and Hassan, N. A. (2011) Do Malaysians use ICT tools when listened to their preferred music? In: 2011 International Conference on Communication and Industrial Application (ICCIA). IEEE Explorer, USA, pp. 1-6. ISBN 978-1-4577-1915-8

Daud, Y. and Hassan, M. Z. and Sarip, S. and Aziz, S. A. and Muhalim, N. A. D. and Raman, N. A. and Jamaludin, K. R. (2015) Mechanical properties of quasi-static and ultrasonic compaction of stainless steel powder metallurgy. In: 6th International Conference on Mechanical & Manufacturing Engineering 2015, 19-21 Oct, 2015, UTHM Johor.

David, Michael and Ibrahim, Mohd. Haniff and Idrus, Sevia Mahdaliza (2015) Sampling frequency effect on the absorption cross section of ozone in the visible spectrum. Journal of Optoelectronics and Advanced Materials, 17 (3-4). pp. 403-408. ISSN 1454-4164

David, Michael and Ibrahim, Mohd. Haniff and Idrus, Sevia Mahdaliza and Azmi, Asrul Izam and Ngajikin, Nor Hafizah and Tay, Marcus Ching En and Yaacob, Maslina M. and Salim, Mohd. Rashidi and Aziz, Azian Abdul (2015) Progress in ozone sensors performance: a review. Jurnal Teknologi, 73 (6). pp. 23-29. ISSN 0127-9696

Da’u, A. and Salim, N. (2020) Recommendation system based on deep learning methods: a systematic review and new directions. Artificial Intelligence Review, 53 (1). pp. 2709-2748. ISSN 0269-2821

Decruz, George and Haron, Habibah Norehan and Jamaludin, Khairur Rijal (2021) Cost of equipment failure modelling as a tool for maintenance strategy. In: 6th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2020, 25 November 2020 - 26 November 2020, Virtual, Online.

Dehghan Najmabadi, Alireza (2012) Strength properties of fly ash based geopolymer concrete containing bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Demun, Amat Sairin (1994) Computerised calculations for water level and velocity variations in the surge tank system. Jurnal Kejuruteraan Awam, 7 (1). pp. 9-18. ISSN 0128-0147  

Derahman, Mohd. Nawi (1989) In-situ combustion - a thermal method in enhanced oil recovery. Buletin FKKKSA, 3 (2). pp. 48-54. ISSN 0128-0740

Derahman, Mohd. Nawi and Zahoor, Muhammad Khurram (2008) Prediction and estimation of capillary pressure of wettability and wettability variations within reservoir. In: 2008 Abu Dhabi International Petroleum Exhibition and Conference, 3-6 November 2008, Abu Dhabi, UAE.

Derawi, D. and Salim, N. D. and Zamzuri, H. and Abdul Rahman, M. A. and Nonami, K. (2016) Robust attitude control design for a low-cost hexarotor micro aerial vehicle. Transactions of the Institute of Measurement and Control, 38 (6). pp. 701-721. ISSN 0142-3312

Derawi, D. and Salim, N. D. and Zamzuri, H. and Rahman, M. A. A. and Nonami, K. (2016) Robust hovering controller for uncertain multirotor micro aerial vehicles (MAVS) in gps-denied environments: IMAGE-BASED. Jurnal Teknologi, 78 (6-13). pp. 37-44. ISSN 0127-9696

Deris, Safaai and Jumali, R. and Hashim, Suhairul Z. M. and Misman, Muhammad Faiz and Mohamad, Mohd. Saberi (2009) A study of network-based approach for cancer classification. In: 2009 International Conference on Information Management and Engineering, ICIME 2009, Kuala Lumpur, 3rd - 5th Apr 2009.

Desa, M. I. and Illyas, M. I. and Mohd. Bahrudin, Siti Sarah (2011) Tracking and tracing technology for halal product integrity over the supply chain. In: 2011 International Conference On Electrical Engineering And Informatics.

Devandran, A. and Dewika, M. and NorRuwaida, J. and Sara, Y. Y. and Khairunnisa, M. P. (2021) Carbon footprint analysis for Sunway University campus. In: 1st International Conference on Biomass Utilization and Sustainable Energy 2020, ICoBiomasSE 2020, 15 - 16 December 2020, Virtual, Online.

Dhar, S. and Shukla, P. R. and Pathak, M. (2017) India's INDC for transport and 2 C stabilization target. Chemical Engineering Transactions, 56 . pp. 31-36. ISSN 2283-9216

Dilshan, Remaz Ossen and Abdul Majid, Roshida and Ahmad, Mohd. Hamdan (2008) Tropical design principles for comfortable indoor climate. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Djamil, Sofyan and Suhot, Mohamed Azlan and Hasan, Mohd. Zaki (2015) Tensile strength polymer matrix composite with reinforcement gigantochloa apus. In: 2nd International Conference on Engineering of Tarumanagara, 22-23 Oct, 2015, Indonesia.

Dolah, Rozzeta and Karnik, Rohit and Hamdan, Halimaton (2021) A comprehensive review on biofuels from oil palm empty bunch (Efb): current status, potential, barriers and way forward. Sustainability (Switzerland), 13 (18). pp. 1-29. ISSN 2071-1050

Dollah, N. S. and Amin, M. K. M. and Muzahidul Islam, A. K. M. and Mikami, O. (2019) Electroencephalography (eeg) application on quantifying emotional intelligence during meditation. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). ISSN 2289-8107

Dollah, Rozilawati and Sheng, Chew Yi and Zakaria, Norhawaniah and Othman, Mohd. Shahizan and Rasib, Abd. Wahid (2019) Deep learning classification of biomedical text using convolutional neural network. International Journal of Advanced Computer Science and Applications, 10 (8). pp. 512-517. ISSN 2158-107X

Donasabe Dodo, Joseph and Yahya, Mohd. Hafiz and Kamaruddin, Md. Nor (2007) Investigation on the impact of tropospheric delay on gps height variation near the equator. In: International Conference on Adaptive Structures and Technologies (ICAST 2007), 10-12 December 2007, Accra, Ghana.

Doulatabadi, M. and Yusof, S. M. and Wong, K. Y. (2016) Sustained quality award status in developing country: a study on the Dubai quality award recipients. In: IEOM Detroit Conference, IEOM 2016, 23-25 Sept 2016, Lawrence Technological University Southfield, United States.

Dubi, I. K. and Waheeb, G. M. and Jabbar, S. A. and Sallehuddin, H. and Satar, N. S. M. and Yahya, F. and Bakar, N. A. A. (2019) System for rogue voip phone detection and managing voip phone mobility. International Journal of Recent Technology and Engineering, 8 (2). pp. 2469-2474. ISSN 2277-3878

Dunal, Amrul (2012) The cost saving in value engineering exercise in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Dung, D. T. and Dinh, N. Q. and Tuan, N. T. and Yamada, Y. and Michishita, N. (2016) Simulation methods of a normal-mode helical antenna in a human body condition. In: 9th International Conference on Advanced Technologies for Communications, ATC 2016, 12 October 2016 through 14 October 2016, Vietnam.

Dung, D. T. and Nguyen, Q. D. and Trinh, D. Q. and Yamada, Y. (2018) Investigating equations used to design a very small normal-mode helical antenna in free space. International Journal of Antennas and Propagation, 2018 . ISSN 1687-5869

Durdyev, S. and Ismail, S. (2017) The build-operate-transfer model as an infrastructure privatisation strategy for Turkmenistan. Utilities Policy, 48 . pp. 195-200. ISSN 0957-1787

Durdyev, S. and Ismail, S. (2016) On-site construction productivity in Malaysian infrastructure projects. Structural Survey, 34 (4-5). pp. 446-462. ISSN 0263-080X

Durdyev, Serdar and Hosseini, M. Reza and Martek, Igor and Ismail, Syuhaida and Arashpour, Mehrdad (2019) Barriers to the use of integrated project delivery (IPD): a quantified model for Malaysia. Engineering, Construction and Architectural Management, 27 (1). pp. 186-204. ISSN 0969-9988

Durdyev, Serdar and Ihtiyar, Ali and Ismail, Syuhaida and Ahmad, Fauziah Sh. (2012) Marketing constraints to real estate sector and improvement measures : case study of Turkey. Energy Education Science and Technology Part B : Social and Educational Studies, 4 (4). pp. 2595-2600. ISSN 1308-772X

Durdyev, Serdar and Ismail, Syuhaida (2012) Role of the construction industry in economic development in Turkmenistan. Energy Education Science and Technology Part A : Energy Science and Research, 29 (2). pp. 883-890. ISSN 1308-772X

Durdyev, Serdar and Ismail, Syuhaida and Kandymov, Nurmurat (2018) Structural equation model of the factors affecting construction labor productivity. Journal of Construction Engineering and Management, 144 (4). p. 4018007. ISSN 0733-9364

Durdyev, Serdar and Mohamed, Sherif and Lay, Meng Leang and Ismail, Syuhaida (2017) Key factors affecting construction safety performance in developing countries: Evidence from Cambodia. Construction Economics and Building, 17 (4). pp. 48-65. ISSN 2204-9029

Durdyev, Serdar and Omarov, Maksat and Ismail, Syuhaida and Lim, Mengheng (2017) Significant contributors to cost overruns in construction projects of Cambodia. Cogent Engineering, 4 (1). ISSN 2331-1916

Dziyauddin, Rudzidatul Akmam and Kaleshi, Dritan and Doufexi, Angela and Alizadeh, Milad (2015) Performance evaluation of quality of service for joint packet dropping and scheduling. Wireless Persol Communications, 83 (2). pp. 1549-1566. ISSN 0929-6212

Dziyauddin, Rudzidatul Akmam and Niyato, Dusit and Luong, Nguyen Cong and Mohd. Atan, Ahmad Ariff Aizuddin and Mohd. Izhar, Mohd. Azri and Azmi, Marwan Hadri and Mohd. Daud, Salwani (2021) Computation offloading and content caching and delivery in Vehicular Edge Network: A survey. Computer Networks, 197 . p. 108228. ISSN 1389-1286

E

Elsupikhe, Randa Fawzi and Shameli, Kamyar and Ahmad, Mansor B. and Ibrahim, Nor Azowa and Zainudin, Norhazlin (2015) Green sonochemical synthesis of silver nanoparticles at varying concentrations of kappa-carrageenan. Nanoscale Research Letters, 10 (1). pp. 1-8. ISSN 1931-7573

Ebrahimian, H. and Noor, N. M. and Rijal, O. M. and Yunus, A. and Kassim, R. M. (2015) Gabor texture measure in interstitial lung disease discrimination using high resolution computed tomography thorax images. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Ebrahimian, H. and Rijal, O. M. and Noor, N. M. and Yunus, A. and Mahyuddin, A. A. (2015) Phase congruency parameter estimation and discrimination ability in detecting lung disease chest radiograph. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Edrus, Farah Awanis (2008) E-pembelajaran lesen memandu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

EI Enshasy, Hesham A. and Mohy EI Din, Mohamed S. and El Sayed, Mohamed and El Sayed, Salah and Haroun, Bakry M. and Hassan, Elsayed A. (2009) Optimization and scaling up of penicillin acylase production process by escherichia coli. World Applied Sciences Journal, 6 (10). pp. 1348-1358. ISSN 1818-4952

Ekramul Mahmud, H. N. M. and Saidina Amin, Nor Aishah and Songip, Ahmad Rahman (1997) Catalytic decomposition of palm oil to liquid fuels and chemicals. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Elfakharany, A. and Yusof, R. and Ismail, N. and Arfa, R. and Yunus, M. (2019) Halalnet: A deep neural network that classifies the halalness of slaughtered chicken from their images. International Journal of Integrated Engineering, 11 (4). pp. 131-138. ISSN 2229-838X

Elfakharany, A. and Yusof, R. and Ismail, Z. (2020) Towards multi robot task allocation and navigation using deep reinforcement learning. In: 4th International Conference on Advanced Technology and Applied Sciences, ICaTAS 2019, 10-12 Sep 2019, Cairo, Egypt.

Elfakharany, E. and Ismail, Z. H. (2021) End-to-end deep reinforcement learning for decentralized task allocation and navigation for a multi-robot system. Applied Sciences (Switzerland), 11 (7). ISSN 2076-3417

Elias, N. A. and Samsuri, Noor Asmawati and A. Rahim, Mohamad Kamal and Othman, N. (2012) The effects of human body and bending on dipole textile antenna performance and SAR. In: 2012 Asia-Pacific Microwave Conference (APMC 2012), 4-7 Dec 2012, Ambassador Hotel Kaohsiung Kaohsiung, Taiwan.

Elnaeim, M. I. and Leong, M. S. and Alfatih, M. S. S. (2017) Life cycle costing in engineering asset management: A study in the steel fabrication industry. International Journal of Mechanical Engineering and Technology, 8 (6). pp. 348-359. ISSN 0976-6340

Elsherairi, Osama Salem (2007) Real-time barcode reader using personal digital assistance (PDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Elsupikhe, R. F. and Ahmad, M. B. and Shameli, K. and Ibrahim, N. A. and Zainuddin, N. (2016) Photochemical reduction as a green method for the synthesis and size control of silver nanoparticles in κ-Carrageenan. IEEE Transactions on Nanotechnology, 15 (2). pp. 209-213. ISSN 1536-125X

Elsupikhe, Randa Fawzi and Shameli, Kamyar and Ahmad, Mansor (2015) Effect of ultrasonic radiation's times to the control size of silver nanoparticles in kappa-carrageenan. Research on Chemical Intermediates, 41 (11). pp. 8829-8838. ISSN 0922-6168

Erfaneh, Noroozi and Mohd. Daud, Salwani and Ali, Sabouhi and Abas, Hafiza (2012) A new dynamic hash algorithm in digital signature. In: Advanced Machine Learning Technologies and Applications: First International Conference, AMLTA 2012, Cairo, Egypt, December 8-10, 2012. Proceedings. Communications in Computer and Information Science, VIII . Springer Berlin Heidelberg, Netherlands, pp. 583-589. ISBN 978-3-642-35325-3

Ergen, Mustafa and Inan, Feride and Ergen, Onur and Shayea, Ibraheem and Tuysuz, Mehmet Fatih and Azizan, Azizul and Ure, Nazim Kemal and Nekovee, Maziar (2020) Edge on wheels with OMNIBUS networking for 6G technology. IEEE Access, 8 . pp. 215928-215942. ISSN 2169-3536

Esfandfard, Elnaz and Wahab, Mohammad Hussaini and Che Amat, Rohayah (2020) Is Tehran's public spaces disability friendly? In: 1st International Conference on Urban Design and Planning, ICUDEP 2019, 10 September 2019, Semarang, Indonesia.

Esfandfard, Elnaz and Wahab, Mohammad Hussaini and Che Amat, Rohayah (2018) Universal design in urban public spaces for people with disability. Case study of Tehran, Iran. Planning Malaysia, 16 (1). pp. 173-182. ISSN 1675-6215

Ettefaghi, E. O. L. and Rashidi, A. and Ghobadian, B. and Najafi, G. and Khoshtaghaza, M. H. and Sidik, N. A. C. and Yadegari, A. and Xian, H. W. (2018) Experimental investigation of conduction and convection heat transfer properties of a novel nanofluid based on carbon quantum dots. International Communications in Heat and Mass Transfer, 90 . pp. 85-92. ISSN 0735-1933

Evers, S. and Yule, C. M. and Padfield, R. and O'Reilly, P. and Varkkey, H. (2017) Keep wetlands wet: the myth of sustainable development of tropical peatlands – implications for policies and management. Global Change Biology, 23 (2). pp. 534-549. ISSN 1354-1013

Ezaty, S. N. and Zaini, N. and Farahhin, N. J. and Kamarudin, K. S. N. (2019) Hydrogen adsorption capacity using modified nickel-kenaf core at different concentrations. In: 7th Conference on Emerging Energy and Process Technology, CONCEPT 2018, 27-28 Nov 2018, Thistle Hotel Johor, Malaysia.

Ezaty, S. N. and Zaini, N. and Farahhin, N. J. and Kamarudin, K. S. N. (2020) Study of hydrogen adsorption onto kenaf sorbent surface by metal impregnation method. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

F

Fujita, Masaya and Mori, Kosuke and Hara, Hirofumi and Hishiyama, Shojiro and Kamimura, Naofumi and Masai, Eiji (2019) A TonB-dependent receptor constitutes the outer membrane transport system for a lignin-derived aromatic compound. Communications Biology, 2 (1). p. 432. ISSN 2399-3642

F. N., Ani and Wong, C. C. and H. M. , Noor (2004) Properties of oil-palm-shell-based phenol wood adhesives compared with petroleum-based phenol wood adhesives. Journal of Oil Palm Research, 16 (1). pp. 54-65. ISSN 1511-2780

Facta, Muchammad (2012) Ozone generation with dielectric barrier discharge chamber using single switch resonant converter. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Fadeyi, Oluwaseun and Krejcar, Ondrej and Maresova, Petra and Kuca, Kamil and Brida, Peter and Selamat, Ali (2020) Opinions on sustainability of smart cities in the context of energy challenges posed by cryptocurrency mining. Sustainability (Switzerland), 12 (1). p. 169. ISSN 2071-1050

Fadhali, Mohamed and Toto, Saktioto and Zainal, Jasman and Munajat, Yusof and Ali, Jalil and Abd Rahman, Rosly (2007) Laser microwelding for reliable packaging of photonic devices. ISESCO International Workshop and Conference on Nonotechnology . p. 1.

Fadhali, Mohamed and Zainal, Jasman and Munajat, Yusof and Abd Rahman, Rosly (2007) Laser welding characterization of kovar and stainless steel alloys as suitable materials for components of photonic devices packaging. International Conference on Advancement of Materials and Nanotechnology (3). p. 1.

Fadhali, Mohamed and Zainal, Jasman and Munajat, Yusof and Ali, Jalil and Abdul Rahman, Rosly (2007) Analysis of laser microwelding applied for photonics devices packaging (14). Journal of solid state science and technology letters, 14 (2). ISSN 0128-8393 (Unpublished)

Fadhilah, Abdul Razak and Ahmad, Robiah and Shamsul, Sarip (2018) High potential of magnet on the performance of dual piezoelectric fans in electronics cooling system. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 469-479. ISSN 2502-4752

Fadhlin Baharuddin, Nurul Amila and Mad Nordin, Mariam Firdhaus and Morad, Noor Azian and Aris, Nor Ilia Anisa and Che Yunus, Mohd. Azizi (2018) Total phenolic, flavonoid content and antioxidant activity of Clinacanthus nutans leaves by water-based ultrasonic assisted extraction. Malaysian Journal of Analytical Sciences, 22 (4). pp. 659-666. ISSN 1394 -2506

Fadil, Nor Aisyah (2003) Portal pengurusan dan penyeliaan seminar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Fahami, S. M. H. and Zamzuri, Hairi and Mazlan, Saiful Amri and Zakaria, M. A. (2012) Modeling and simulation of vehicle steer by wire system. In: SHUSER 2012 - 2012 IEEE Symposium on Humanities, Science and Engineering Research. IEEE, New York, USA, pp. 765-770. ISBN 978-146731310-0

Fahami, Sheikh Muhamad Hafiz and Zamzuri, Hairi and Mazlan, Saiful Amri (2015) Development of estimation force feedback torque control algorithm for driver steering feel in vehicle steer by wire System: Hardware in the loop. International Journal of Vehicular Technology, 2015 . p. 314597. ISSN 1687-5702

Fahami, Sheikh Muhammad Hafiz and Zamzuri, Hairi and Mazlan, Saiful Amri and Saruchi, Sarah Atifah (2014) The variable steering ratio for vehicle steer by wire system using hyperbolic tangent method. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014, 17-18 May, 2014, Tianjin; China.

Fahami Zainal, Sheikh Muhammad Hafiz (2016) The virtual force feedback for torque estimation and control in a vechicle Steer by Wire (SBW) system. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School in Engineering and Advanced Technology.

Faidi, Mohd. Azahari (2009) Pengeluaran primer bersih kawasan hutan hujan tropika menggunakan data Aster. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Faisal, U. H. and Ahmad Sabri, N. S. and Yusof, N. and Tahir, A. A. and Mohd. Said, N. N. and Riyadi, F. A. and Akhir, F. N. M. and Othman, N. and Hara, H. (2021) Draft genome sequence of lignin-degrading agrobacterium sp. Strain s2, isolated from a decaying oil palm empty fruit bunch. Microbiology Resource Announcements, 10 (19). ISSN 2576-098X

Faizal, F. and Khairunnisa, M. P. and Yokote, S. and Lenggoro, I. W. (2018) Carbonaceous nanoparticle layers prepared using candle soot by direct- and spray-based depositions. Aerosol and Air Quality Research, 18 (4). pp. 856-865. ISSN 1680-8584

Faizal Johari, Mohd. Aidy and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Nordin, Nur Azmah and Abdul Aziz, Siti Aishah and Johari, Norhasnidawani and Nazmi, Nurhazimah and Homma, Koji (2021) Shear band formation in magnetorheological elastomer under stress relaxation. Smart Materials and Structure, 30 (4). 045015-045015. ISSN 0964-1726

Faizura Haneem, Faizura Haneem and Kama, Nazri and Abu Bakar, Nur Azaliah (2019) Critical influential determinants of IT innovation adoption at organisational level in local government context. IET Software, 13 (4). pp. 233-240. ISSN 1751-8806

Fan, Yee Van and Peng, Jiang and Klemeš, Jirí Jaromír and Liew, Peng Yen and Lee, Chew Tin (2021) Integrated regional waste management to minimise the environmental footprints in circular economy transition. Resources, Conservation and Recycling, 168 . p. 105292. ISSN 0921-3449

Farh, H. M. H. and Eltamaly, A. M. and Othman, M. F. (2018) Hybrid PSO-FLC for dynamic global peak extraction of the partially shaded photovoltaic system. PloS one, 13 (11). ISSN 1932-6203

Farh, Hassan M. H. and Eltamaly, Ali M. and Ibrahim, Ahmed B. and Othman, Mohd. F. (2019) Dynamic global power extraction from partially shaded photovoltaic using deep recurrent neural network and improved PSO techniques. International Transactions on Electrical Energy Systems, 29 (9). e12061-e12061. ISSN 2050-7038

Farh, Hassan M. H. and Othman, Mohd F. and Eltamaly, Ali M. and Al-Saud, M. S. (2018) Maximum power extraction from a partially shaded PV system using an interleaved boost converter. Energies, 11(10) (2543). pp. 1-18. ISSN 1996-1073

Faridmehr, I. and Tahir, M. M. and Lahmer, T. and Osman, M. H. (2017) Seismic Performance of Steel Frames with Semirigid Connections. Journal of Engineering (United States), 2017 . ISSN 2314-4904

Faridmehr, Iman and Md. Tahir, Mamood and Osman, Mohd. Hanim and Azimi, Mohammadamin (2020) Cyclic behaviour of fully-rigid and semi-rigid steel beam-to-column connections. International Journal of Steel Structures, 20 (2). pp. 365-385. ISSN 1598-2351

Faried, M. and Shameli, K. and Miyake, M. and Zakaria, Z. and Hara, H. and Ahmad Khairudin, N. B. and Etemadi, M. (2016) Ultrasound-assisted in the synthesis of silver nanoparticles using sodium alginate mediated by green method. Digest Journal of Nanomaterials and Biostructures, 11 (2). pp. 547-552. ISSN 1842-3582

Faried, Miftah and Shameli, Kamyar and Miyake, Mikio and Hara, Hirofumi and Ahmad Khairudin, Nurul Bahiyah (2015) Green sonochemical synthesis of silver nanoparticles using marine seaweed as biopolymer media. Digest Journal of Nanomaterials and Biostructures, 10 (4). pp. 1419-1426. ISSN 1842-3582

Faried, Miftah and Suga, Keishi and Okamoto, Yukihiro and Shameli, Kamyar and Miyake, Mikio and Umakoshi, Hiroshi (2019) Membrane surface-enhanced raman spectroscopy for cholesterol-modified lipid systems: Effect of gold nanoparticle size. ACS Omega, 4 (9). pp. 13687-13695. ISSN 2470-1343

Fariq, Nazirul and Ismail, Syuhaida and Ab. Rani, Nur Izzati (2020) Cost risk of railway project and its effective mitigation strategies. Journal of Critical Reviews, 7 (8). pp. 1275-1280. ISSN 2394-5125

Farnaz, Towhidi and Abdul Manaf, Azizah and Mohd. Daud, Salwani and Arash, Habibi Lashkari (2011) The knowledge based authentication attacks. In: Proceedings Of The 2011 International Conference On Security & Management. CSREA Press, USA, pp. 1-5. ISBN 1-60132-196-1

Faruq, A. and Abdullah, S. S. and Marto, A. and Bakar, M. A. A. and Hussein, S. F. M. and Razali, C. M. C. (2019) The use of radial basis function and non-linear autoregressive exogenous neural networks to forecast multi-step ahead of time flood water level. International Journal of Advances in Intelligent Informatics, 5 (1). pp. 1-10. ISSN 2442-6571

Faruq, A. and Abdullah, S. S. and Marto, A. and Bakar, M. A. A. and Samin, Samin and Mubin, A. (2020) River water level forecasting for flood warning system using deep learning long short-term memory network. In: 2019 3rd International Conference on Engineering and Applied Technology, ICEAT 2019, 30 - 1 November 2019, Sorong, Indonesia.

Faruq, Amrul and Arsa, Hudan Pandu and Mohd. Hussein, Shamsul Faisal and Che Razali, Che Munira and Marto, Aminaton and Abdullah, Shahrum Shah (2020) Deep learning-based forecast and warning of floods in Klang River, Malaysia. Ingenierie des Systemes d'Information, 25 (3). pp. 365-370. ISSN 0163-3131

Farzad, Reza Hashemi (2011) Properties of alumina trihydrate filled polyproylene/ethylene propylene diene monomer composites for cable applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Fathi, Sharihan and Harun, Aizul Nahar and Rambat, Shuib and Mohd. Nawi, Mohd. Nasrun and Haron, Nuzul Azam (2018) Development of a mobile aquaculture management systems for performance monitoring of aquaculture players. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-11). pp. 113-117. ISSN 2180-1843

Fatima, N. and Nazir, S. and Chuprat, S. (2020) Knowledge sharing factors for modern code review to minimize software engineering waste. International Journal of Advanced Computer Science and Applications, 11 (1). pp. 490-497. ISSN 2158-107X

Fatima, Nargis and Nazir, Sumaira and Chuprat, Suriayati (2020) Knowledge sharing framework for modern code review to diminish software engineering waste. International Journal of Advanced Computer Science and Applications, 11 (6). pp. 442-450. ISSN 2158-107X

Fauzi, Fauzi and Huda, Miftachul and Mat Teh, Kamarul Shukri and Haroon, Zulkiflee and Ripin, Mohd. Nasir and Hehsan, Aminuddin and Abas, Hafiza and Hehsan, Muhamad Rafiqi and Irawan, July and Abadi, Satria and Maseleno, Andino (2018) The design of fuzzy expert system implementation for analyzing transmissible disease of human. International Journal of Pharmaceutical Research, 10 (4). pp. 68-73. ISSN 0975-2366

Fauzi, H. and Shapiai, M. I. and Khairuddin, U. (2020) Transfer learning of bci using cur algorithm. Journal of Signal Processing Systems, 92 (1). pp. 109-121. ISSN 1939-8018

Fauzi, N. F. and Ali, M. T. and Abd Rahman, N. H. and Yamada, Y. (2016) Accurate feed position designing for Malaysia beam coverage. In: 6th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, IEEE APWC 2016, 19 September 2016 through 23 September 2016, Australia.

Fauzi, N. F. and Ali, M. T. and Rahman, N. H. A. and Yamada, Y. (2016) Optimized parabolic reflector antenna for Malaysia beam coverage. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Fauzi, N. F. and Yamada, Y. and Ali, M. T. and Abd. Rahman, N. H. (2018) Feed system design of a parabolic reflector antenna for Malaysia shaped beam coverage. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2). pp. 55-59. ISSN 2180-1843

Feng, Z. and Nakamura, T. and Sato, D. and Kosawada, T. and Kitajima, T. and Umezu, M. (2015) Biomechanics of fibroblast-compacted collagen gels investigated under fibrillar framework. In: 6th International Conference on Mechanics of Biomaterials and Tissues, 6-10 Dec, 2015, USA.

Fong, Wan Heng and Gan, Yee Siang and Sarmin, Nor Haniza and Turaev, Sherzod (2015) The generative capacity of weighted simple and semi-simple splicing systems. In: Simposium Kebangsaan Sains Matematik Ke 23 (SKSM23), 24-26 Nov,2015, Johor Bahru, johor.

Fong, Wan Heng and Salleh, Shaharuddin (2004) A visual tool for determining the maximum independent set of a graph using the polynomial formulation method. Jurnal Teknologi, 41 . pp. 65-72.

Foo, Dominic Chwan Yee and Abd. Manan, Zainuddin and Yunus, R. M. and Abdul Aziz, Ramlan (2004) Synthesis of mass exchange network for batch processes - part 1: utility targeting. Chemical Engineering Sciences , 59 . pp. 1009-1026. ISSN 0009-2509

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Abdul Aziz, Ramlan (2003) Water cascade analysis technique for minimum flowrate targeting: tabular and numerical approach. Proceedings of International Conference on Chemical and Bioprocess Engineering . pp. 414-421.

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin and Mohd Yunus, Rosli and Abdul Aziz, Ramlan (2003) Synthesis of mass exchange networks for batch processes. Part 2: Batch network design. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 809-814.

Foo, Dominic Chwan Yee and Abdul Manan, Zainuddin (2005) Optimisation of regeneration unit to achieve zero discharge in a paper mill. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Foudeh, Pouya and Salim, Naomie (2011) Probabilistic ontologies and probabilistic ontology learning: significance and challenges. In: International Conference On Research And Innovation In Information Systems (Icriis 2011).

Frank Wilkins, Luqman Hakeem and Batumalai, Pragathesh and Jasmi, Kamarul Azmi (2019) Media Sosial dan Dampak Positif Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Munir, A. B. and Yasin, S. H. M. and Bani, N. A. and Mas'ud, A. A. and Ardila-Rey, J. A. and Karim, M. E. (2018) Annual prediction output of an RADTIRC-PV module. Energies, 11 (3). ISSN 1996-1073

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Munir, A. B. and Yasin, S. H. M. and Mas'ud, A. A. and Bani, N. A. (2016) Effect of diffuse radiation on the performance of a rotationally asymmetrical optical concentrator. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Fujita, H. and Selamat, A. (2015) Intelligent software methodologies, tools and techniques 13th international conference, SoMeT 2014 Langkawi, Malaysia, september 22–24, 2014 revised selected papers. In: 13th International Conference on New Trends in Intelligent Software Methodology Tools and Techniques, SoMeT 2014, 22 - 24 September 2014, Langkawi, Malaysia.

Fujita, Kento and Okada, Masaki and Hoshina, Taka Aki and Yamada, Hidetaka and Tsuji, Tomoya and Hiaki, Toshihiko (2019) CO2 absorption effect on electric conductivities for butylethanolamine and methyldiethanolamine aqueous solutions at 313 K. Bunseki Kagaku, 68 (9). pp. 647-655. ISSN 0525-1931

Fukuda, K. and Morita, T. (2017) Physical model of adhesive wear in early stage of sliding. Wear, 376-37 . pp. 1528-1533. ISSN 0043-1648

Fukuda, K. and Sheng, S. L. and Subhi, Z. A. (2019) Tribological behavior of hydrophilic and hydrophobic surfaces in atmosphere with different relative humidity. Tribology Online, 14 (5). pp. 353-358. ISSN 1881-218X

Fukuda, Kanao (2012) An attempt at analyzing chronological changes in adhesive wear. In: Proceedings of JAST Tribology Conference, 2012.

Fukuda, Kanao (2012) An attempt at analyzing chronological changes in adhesive wear-2. In: Proceedings of JAST Tribology Conference, 2012.

Fukuda, Kanao (2012) Influences of trace impurities in hydrogen on tribological properties of austenitic stainless steel. In: Proceedings of JAST Tribology Conference, 2012.

Fukuda, Kanao (2012) Influencing factors on the wear of materials. Journal of Japanese Society of Tribologists, 57 (5). pp. 327-332. ISSN 0915-1168

Fukuda, Kanao and Mohd. Radzi, Muhammad Faidhi and Subhi, Zaid Ali and A. Manaf, Noor Dalilah (2018) Influences of surface roughness on water adsorption on austenitic stainless steel. In: Proceedings of Asia International Conference on Tribology 2018.

Fukuda, Kanao and Subhi, Zaid Ali and Morita, Takehiro (2015) Analytical study on the growth and transfer of adhesive substances generated on the surface in the early stage of sliding. Wear, 330 . pp. 64-69. ISSN 0043-1648

G

Gan, P. G. and Sam, S. T. and Abdullah, M. F. and Omar, M. F. and Tan, L. S. (2020) An alkaline deep eutectic solvent based on potassium carbonate and glycerol as pretreatment for the isolation of cellulose nanocrystals from empty fruit bunch. BioResources, 15 (1). ISSN 1930-2126

Ghaffari, Babak Vazifehkhah and Kouhnavard, Mojgan and Aihara, Takeshi and Kitajima, Tatsuo (2015) Mathematical modeling of subthreshold resonant properties in pyloric dilator neurons. Biomed Research International, 2015 . ISSN 2314-6133

Ghafourian, K. and Mohamed, Z. and Ismail, S. and Malakute, R. and Abolghasemi, M. (2016) Current status of the research on construction and demolition waste management. Indian Journal of Science and Technology, 9 (35). ISSN 0974-6846

Ghalehteimouri, K. J. and Shamaei, A. and Ros, F. C. (2021) Effectiveness of spatial justice in sustainable development and classification of sustainability in Tehran province. Regional Statistics, 11 (2). pp. 52-80. ISSN 2063-9538

Ghalip, Ammar Yassin (2004) Arab Travellers Images of Malaysia: Comparison of Push and Pull Factors in Technological Mediated Environment. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Ghani, I. A. and Sidik, N. A. C. and Mamat, R. and Najafi, G. and Ken, T. L. and Asako, Y. and Japar, W. M. A. A. (2017) Heat transfer enhancement in microchannel heat sink using hybrid technique of ribs and secondary channels. International Journal of Heat and Mass Transfer, 114 . pp. 640-655. ISSN 0017-9310

Ghani, Z. A. and Anuar, A. N. and Majid, Z. A. and Yoneda, M. (2015) Multimedia environmental fate and transport model of dichlorodiphenyltrichloroethane (DDT): case study sayong river watershed. In: The 2nd IWA Malaysia Young Water Professionals Conference 2015, 17-20 Mac, 2015, Kuala Lumpur, Malaysia.

Ghazali, Masitah and Ashraf, Mahmood (2011) Towards natural interaction with wheelchair using Nintendo Wiimote controller. In: Communications in Computer and Information Science. Springer, Kuantan, Pahang, pp. 231-245. ISBN 978-364222202-3

Ghazali, N. S. and Baharun, S. and Islam, A. K. M. M. and Wada, K. (2016) Adaptive tree-based routing for multi-channel wireless sensor network. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Dhaka; Bangladesh.

Ghazali, Naseem H. and Abdul Manaf, Azizah and Sulong, Ghazali (2015) High capacity watermarking technique for medical images using fibonacci decomposition. International Journal of Applied Engineering Research, 10 (2). pp. 3431-3438. ISSN 0973-4562

Ghazali, Norizzawati M. and Tomizawa, Hiroshi and Hagiwara, Noriyuki and Suzuki, Katsuya and Hashim, Abdul M. and Yamaguchi, Tomohiro and Akita, Seiji and Ishibashi, Koji (2019) Fabrication of tunnel barriers and single electron transistors in suspended multi-wall carbon nanotubes. AIP Advances, 9 (10). p. 105015. ISSN 2158-3226

Ghazali, Nur Syazwani and Baharun, Sabariah and Islam, A. K. M. Muzahidul and Wada, Koichi (2018) Designing a maintenance free multi-channel wireless sensor network protocol. Jurnal Teknologi, 80 (2). pp. 67-75. ISSN 0127-9696

Ghazali, Razatulshima and Ahmad, Mohammad Nazir and Sedera, Darshana and Zakaria, Nor Hidayati (2019) The mediating role of knowledge integration model for enterprise systems success. Journal of Enterprise Information Management, 32 (1). pp. 75-97. ISSN 1741-0398

Gholampour, Gholamreza and Abdul Rahim, Abdul Rahman (2015) The evaluation of operational performance of supply chain at automotive industry. Journal of Theoretical and Applied Information Technology, 73 (3). pp. 383-394. ISSN 1992-8645

Ghumman, A. S. M. and Shamsuddin, M. R. S. and Nasef, M. M. and Yahya, W. Z. N. and Ayoub, M. and Cheah, B. and Abbasi, A. (2021) Synthesis and characterization of sustainable inverse vulcanized copolymers from non-edible oil. ChemistrySelect, 6 (6). ISSN 2365-6549

Ghumman, A. S. M. and Shamsuddin, R. and Nasef, M. M. and Yahya, W. Z. N. and Yahya, A. (2021) Optimization of synthesis of inverse vulcanized copolymers from rubber seed oil using response surface methodology. Polymer, 219 . ISSN 0032-3861

Gilani, Seyyed Mid and Sattarvand, Javad and Hajihassani, Mohsen and Abdullah, Shahrum Shah (2020) A stochastic particle swarm based model for long term production planning of open pit mines considering the geological uncertainty. Resources Policy, 68 . p. 101738. ISSN 0301-4207

Godazgar, Vahid and Majd, Elham and Abu Hassan, Norihan and Abdul Talib, Hayati @ Habibah (2015) A computational method for selecting service quality factors considering the representative models. Journal Of Scientific Research And Development, 2 (6). pp. 39-48. ISSN 1115-7569

Gofar, Nurly and Kassim, Azman (2008) Mechanics of rainfall infiltration through soil slope. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Gofar, Nurly and Lee, Lee Min (2009) PERISI: a computer program for preliminary evaluation of rainfall-induced slope instability. Malaysian Journal of Civil Engineering, 21 (2). pp. 235-240. ISSN 1823-7843

Goh, Kian Mau and Mahadi, Nor Muhammad and Hassan, Osman and Raja Abdul Rahman, Raja Noor Zaliha and Md. Illias, Rosli (2005) Purification and characterization of recombinant enzyme CGTase G1. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Goh, Shu Wei (2003) Problems faced by local sub-contractor in public works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Wei Kiat (2012) Transformer inrush signature recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Goher, G. and Masrom, M. and Amrin, A. and Abd. Rahim, N. (2021) Disruptive technologies for labor market information system implementation enhancement in the UAE: a conceptual perspective. International Journal of Advanced Computer Science and Applications, 12 (2). pp. 370-379. ISSN 2158-107X

Goher, Ghada and Masrom, Maslin and Amrin, Astuty and Abd. Rahim, Noorlizawati (2020) UAE labor market snapshot skills and educational mismatch during industry 4.0. International Journal of Recent Technology and Engineering (IJRTE), 8 (6). pp. 1332-1340. ISSN 2277-3878

Gopinath, S. C. B. and Ramanathan, S. and Yasin, M. Y. M. and Shapiai, M. I. and Ismail, Z. H. and Subramaniam, S. (2021) Essential semiconductor films in micro-/nano-biosensors: current scenarios. Journal of the Taiwan Institute of Chemical Engineers, 127 . ISSN 1876-1070

Goudarzi, S. and Hassan, W. H. and Anisi, M. H. and Soleymani, S. A. (2016) Comparison between hybridized algorithm of GA–SA and ABC, GA, DE and PSO for vertical-handover in heterogeneous wireless networks. Sadhana - Academy Proceedings in Engineering Sciences, 41 (7). pp. 727-753. ISSN 0256-2499

Goudarzi, S. and Hassan, W. H. and Soleymani, S. A. and Zakaria, O. and Jivanadham, L. B. (2016) Artificial bee colony for vertical-handover in heterogeneous wireless networks. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Goudarzi, Shidrokh and Hassan, Wan Haslina and Baee, Mir Ali Rezazadeh and Soleymani, Seyed Ahmad (2015) The model of customer trust for internet banking adoption. Studies in Computational Intelligence, 595 . pp. 399-414. ISSN 1860-949X

Gouldson, A. and Colenbrander, S. and Sudmant, A. and Papargyropoulou, E. and Kerr, N. and McAnulla, F. and Hall, S. (2016) Cities and climate change mitigation: economic opportunities and governance challenges in Asia. Cities, 54 . pp. 11-19. ISSN 0264-2751

Gozali, L. and Masrom, M. and Zagloel, T. M. and Haron, H. N. and Dahlan, D. and Daywin, F. J. and Saryatmo, M. A. and Saraswati, D. and Syamas, A. F. and Susanto, E. H. (2018) Critical success and moderating factors effect in Indonesian Public Universities' business incubators. International Journal of Technology, 9 (5). pp. 1049-1060. ISSN 2086-9614

Gozali, L. and Masrom, M. and Zagloel, T. Y. M. and Habibah, Habibah and Haron, N. (2016) A framework of successful business incubators for indonesian public universities. International Journal of Technology, 7 (6). pp. 1086-1096. ISSN 2086-9614

Guozhong, Wang and Webb, J. F. and Jian, Zi (2007) The strictly attractive 1/l2 interaction between steps of crystal surfaces. Surface Science, 601 (9). pp. 1944-1948.

Gurunathan, Balamurugan A. and Khairuddin, Uswah and Azlan Shah, Nazrun Nabill and Ricardo, Martinez Botas (2020) Influence of double entry volute on incidence angle variation under steady flow: Numerical investigation. CFD Letters, 12 (10). pp. 75-89. ISSN 2180-1363

H

Hamsani, Muhammad Nurheilmi and Walmsley, Timothy Gordon and Liew, Peng Yen and Wan Alwi, Sharifah Rafidah (2018) Combined Pinch and exergy numerical analysis for low temperature heat exchanger network. Energy, 153 . pp. 100-112. ISSN 0360-5442

Hassan, Mohamad Zaki and Sapuan, S. M. and Roslan, S. A. and Aziz, S. A. and Sarip, S.Sarip (2019) Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology. Journal of Materials Research and Technology, 8 (4). pp. 3517-3528. ISSN 2238-7854

Hettiarachchi, Gayan Prasad and Yoshifumi, Nishida and Yusuke, Masaki and Mohd. Muhid, Mohd. Nazlan and Hamdan, Halimaton (2020) Optical investigations of the (dis)continuous metal–insulator transitions in strongly-coupled electron-lattice systems. Journal of Physics Condensed Matter, 32 (9). 095601-095601. ISSN 0953-8984

Harun, Muhammad Arif and Gunnasegaran, Prem and Che Sidik, Nor Azwadi and Beriache, M’hamed and Ghaderian, Javad (2021) Experimental investigation and optimization of loop heat pipe performance with nanofluids. Journal of Thermal Analysis and Calorimetry, 144 (4). pp. 1435-1449. ISSN 1388-6150

H'ng, Gaik Hi (2013) Development of general purpose graphics processing unit with shading capability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

H'ng, Y. M. and Yusup, Y. and Zaki, S. A. (2019) Energy balance analysis and turbulence profile of a darrieus-type vertical axis wind turbine. Journal of Physical Science, 30 (1). pp. 47-70. ISSN 1675-3402

H., Nurul Hafizah and Setan, Halim and Majid, Zulkepli (2008) Three dimensional modeling using close range photogrametry for historical artifact. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

H. S. Ariffin, Sharifah and Schormans, John A. (2008) An acceleration simulation method for power law priority traffic. Elektrika, 10 (1). pp. 60-67. ISSN 0128-4428

Habibullah, Muzafar Shah and Sanusi, Nur Azura and Abdullah, Lazim and Kusairi, Suhal and Golam Hassan, Asan Ali and Azura, Normi (2018) How long does it takes for a poor state to catch-up to a richer state in Malaysia? a note. International Journal of Business and Society, 19 (2). pp. 269-280. ISSN 1511-6670

Hadi Yaacob, Mohd. Ikhwan (2008) Programmable capacitor charging power supply for Nd : YAG laser system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hadiwinoto, D.Dwirianti and Salim, M.R. and Ujang, Z. (2004) Environmental biotechnology: advancement in water and wastewater application in the tropics. IWA Publishing. ISBN 9781843395034

Hadiwinoto, Dewi Dwirianti (2002) Membrane bioreactor for treatment of high-sulfate wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haghi, Abbas (2012) Gradient image generator hardware/software co-design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Haini, Siti Isnaine and Ab. Rahim, Nor Zairah and Megat Mohd. Zainuddin, Norziha and Ibrahim, Roslina (2020) Factors influencing the adoption of open government data in the public sector: a systematic literature review. International Journal on Advanced Science, Engineering and Information Technology, 10 (2). pp. 611-617. ISSN 2088-5334

Hairuddin, Muhammad Nazmi and Mubarak, Nabisab Mujawar and Mohammad Khalid, Mohammad Khalid and Abdullah, Ezzat Chan and Walvekar, Rashmi and Karri, Rama Rao (2019) Magnetic palm kernel biochar potential route for phenol removal from wastewater. Environmental Science and Pollution Research, 26 (34). pp. 35183-35197. ISSN 0944-1344

Hajalilou, A. and Mazlan, S. A. and Shameli, K. (2016) A comparative study of different concentrations of pure Zn powder effects on synthesis, structure, magnetic and microwave-absorbing properties in mechanically-alloyed Ni-Zn ferrite. Journal of Physics and Chemistry of Solids, 96-97 . pp. 49-59. ISSN 0022-3697

Hajalilou, A. and Mazlan, S. A. and Shila, S. T. (2016) Magnetic carbonyl iron suspension with Ni-Zn ferrite additive and its magnetorheological properties. Materials Letters, 181 . pp. 196-199. ISSN 0167-577X

Hajalilou, A. and Mazlan, S. A. and Shilan, S. T. and Abouzari Lotf, E. (2017) Enhanced magnetorheology of soft magnetic carbonyl iron suspension with binary mixture of Ni-Zn ferrite and Fe3O4 nanoparticle additive. Colloid and Polymer Science, 295 (9). pp. 1499-1510. ISSN 0303-402X

Hajalilou, Abdollah and Kianvash, Abbas and Lavvafi, Hossein and Shameli, Kamyar (2018) Nanostructured soft magnetic materials synthesized via mechanical alloying: a review. Journal of Materials Science: Materials in Electronics, 29 (2). pp. 1690-1717. ISSN 0957-4522

Hajar, S. and Rashid, M. and Nurnadia, A. and Ammar, M. R. (2016) PrekotAC as a new filter aids material for fabric filter in air filtration system. Jurnal Teknologi, 78 (3-2). pp. 19-24. ISSN 0127-9696

Hajari, Mohammad Hamed (2012) Modeling and control of industrial servo pneumatic actuator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hajihassani, M. and Kalatehjari, R. and Marto, A. and Mohamad, H. and Khosrotash, M. (2020) 3D prediction of tunneling-induced ground movements based on a hybrid ann and empirical methods. Engineering with Computers, 36 (1). pp. 251-269. ISSN 0177-0667

Haladin, Nur’ain Balqis and Ibrahim, Noor Aireen and Rajab, Azizah (2017) HIV communication challenges faced by HIV specialist nurses in Malaysia government hospitals. Language for Specific Purposes (LSP) International Journal, 4 (1). pp. 37-54. ISSN 2601-002x

Halim, Noor Azlina and Nasri, Noor Shawal and Songip, Ahmad Rahman (2005) Characterization of CoNi based catalyst for water gas shift reaction. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Hambali, Nur Ashikyn and Hashim, Abdul Manaf (2015) Synthesis of Zinc Oxide Nanostructures on Graphene/Glass Substrate via Electrochemical Deposition: Effects of Potassium Chloride and Hexamethylenetetramine as Supporting Reagents. no-Micro Letters, 7 (4). pp. 317-324. ISSN 2311-6706

Hamdan, Abdul Rahim and Abdul Ghaffar, Mohamed Najib and Sihes, Ahmad Johari and Ramli, Jamaluddin (2008) Taksonomi gaya pembelajaran dan tingkat motivasi pelajar dewasa. Project Report. Faculty of Education, Skudai, Johor. (Unpublished)

Hamdan, A. R. and Fathi, M. S. and Mohamed, Z. (2018) Evolution of Malaysia's technology transfer model facilitated by national policies. International Journal of Engineering and Technology(UAE), 7 (2). pp. 196-202. ISSN 2227-524X

Hameed, Shilan S. and Hassan, Rohayanti and Hassan, Wan Haslina and Muhammadsharif, Fahmi F. and Abdul Latiff, Liza (2021) HDG-select: A novel GUI based application for gene selection and classification in high dimensional datasets. PLoS ONE, 16 . e0246039-e0246039. ISSN 1932-6203

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza (2020) An efficient fog-based attack detection using ensemble of MOA-WMA for internet of medical things. In: Lecture Notes on Data Engineering and Communications Technologies. Springer, Cham, pp. 774-785. ISBN 978-3-030-70712-5

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza and Ghabban, Fahad (2021) A systematic review of security and privacy issues in the internet of medical things; the role of machine learning approaches. PeerJ Computer Science, 7 . pp. 1-44. ISSN 2376-5992

Hameed, Shilan S. and Hassan, Wan Haslina and Abdul Latiff, Liza and Muhammad, Fahmi F. (2021) A comparative study of nature-inspired metaheuristic algorithms using a three-phase hybrid approach for gene selection and classification in high-dimensional cancer datasets. Soft Computing, 25 (13). pp. 8683-8701. ISSN 1432-7643

Hamid, Mohd. Fauzi and Low, Ee Chai (1995) Kesan penggunaan sekam padi dan sabut kelapa sawit ke atas masa penebalan dan kekuatan mampatan simen. Buletin FKKKSA, 9 (1). pp. 17-23. ISSN 0128-0740

Hamid, Muh. Imran and Anwari, Makbul and Taufik, Taufik (2008) Comparison of current control methods on carrier based VSI-PWM inverter drivers from line power quality aspects. TELKOMNIKA (Telekomunikasi Komputasi Elektronika Kendali), 6 (2). pp. 93-100. ISSN 1693-6930

Hamid, S. and Ali, M. T. and Abd Rahman, N. H. and Pasya, I. and Yamada, Y. and Michishita, N. (2016) Accuracy estimations of a negative refractive index cylindrical lens antenna designing. In: 6th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, IEEE APWC 2016, 19 September 2016 through 23 September 2016, Australia.

Hamid, U. Z. A. and Ariff, M. H. M. and Zamzuri, H. and Saito, Y. and Zakaria, M. A. and Rahman, M. A. A. and Raksincharoensak, P. (2017) Piecewise trajectory replanner for highway collision avoidance systems with safe-distance based threat assessment strategy and nonlinear model predictive control. Journal of Intelligent and Robotic Systems: Theory and Applications . pp. 1-23. ISSN 0921-0296 (In Press)

Hamid Toloue, A. T. and Ikohza, Anthony Centeno Nano (2015) An enhanced sensitive graphene-based spr biosensor with angular modulation. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7119-7123. ISSN 1819-6608

Hamid, Mohd. Fauzi (1993) Kesan bahan tambah pelambat ke atas kekuatan mampatan dan ketertelapan simen. Buletin FKKKSA, 7(2) . pp. 8-11. ISSN 0128-0740

Hamid, Mohd. Fauzi (1990) Kesan bentonit ke atas kekuatan mampatan dan ketertelapan simen. Buletin FKKKSA, 4 (1). pp. 1-4. ISSN 0128-0740

Hamid, Mohd. Fauzi (1991) Kesan pencemaran garam ke atas kekuatan dan kebolehtelapan simen. Buletin FKKKSA, 5 (1). pp. 21-24. ISSN 0128-0740

Hamid, Mohd. Fauzi and A. Karim, Khairuddin and Md. Noor, Nazily (1993) Penggunaan sekam padi dalam penyimenan telaga minyak. Buletin FKKKSA (7(1)). pp. 31-36. ISSN 0128-0740

Hamid, Mohd. Fauzi and Abdul Karim, Khairuddin and Mohd. Noor, Nazily (1994) Penggunaan sabut kelapa sawit sebagai bahan tambah kehilangan bendalir simen. Buletin FKKKSA, 8(1) . pp. 62-66. ISSN 0128-0740

Hamit, Laura Cassandra and Md. Sarkan, Haslina and Mohd. Azmi, Nurulhuda Firdaus and Mahrin, Mohd. Naz’ri and Chuprat, Suriayati and Yahya, Yazriwati (2020) Adopting ISO/IEC 27005:2011-based risk treatment plan to prevent patients data theft. International Journal on Advanced Science, Engineering and Information Technology, 10 (3). pp. 914-919. ISSN 2088-5334

Hammood, Oday Hamzah (2012) Punching shear resistance of flat slab with various types of shear reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hammuda Aluhwal, Omar Kalifa (2008) Simulation study of improving oil recovery by polymer flooding in a Malaysian reservoir. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Hamuda, Esmael Ali Ramadan (2006) Automatic coronary artery detection in cardiogram image. Masters thesis, Universiti Techonologi of Malaysia, Faculty of Electrical Engineering : Electrical-Electronics & Telecommunication.

Hamza, Bashar J. and Saad, Wasan Kadhim and Shayea, Ibraheem and Ahmad, Norulhusna and Mohamed, Norliza and Nandi, Dalia and Gholampour, Golshan (2021) Performance enhancement of SCM/WDM-RoF-XGPON system for bidirectional transmission with square root module. IEEE Access, 9 . pp. 49487-49503. ISSN 2169-3536

Hamza, M. G. and Latiff, L. A. and Alfagi, A. S. (2016) Influence of ellipsoid dust Particle Size Distribution on microwave and millimeter wave frequencies. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, Bangladesh.

Hamzah, Azura and Saris, Nur Najahatul Huda and Azrin, Nur Nadia Asila (2018) Flat-gain and wideband EDFA by using dual stage amplifier technique. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-6). pp. 25-29. ISSN 2180-1843

Hamzah, N. A. and Othman, N. and Musa, W. A. (2020) A qualitative analysis on causes of human trafficking from the perspective of Malaysian authorities. International Journal of Academic Research in Business and Social Sciences, 10 (3). pp. 77-90. ISSN 2222-6990

Hamzah, Nurul Amirah and Othman, Nooraini and Musa, Wardatul Aishah (2020) Increasing and reduction factors in the issue of human trafficking in Malaysia from the perspective of enforcement. International Journal of Academic Research in Business and Social Sciences, 10 (8). pp. 843-861. ISSN 2222-6990

Haneem, F. and Bakar, H. A. and Kama, N. and Mat, N. Z. N. and Ghazali, R. and Mahmood, Y. (2020) Recent progress of blockchain initiatives in government. International Journal of Advanced Computer Science and Applications, 11 (11). ISSN 2158-107X

Haneem, Faizura and Kama, Nazri and Taskin, Nazim and Pauleen, David and Abu Bakar, Nur Azaliah (2019) Determinants of master data management adoption by local government organizations: an empirical study. International Journal of Information Management, 45 . pp. 25-43. ISSN 0268-4012

Hanifah, Mohamad Fahrul Radzi and Jaafar, Juhana and Abd. Aziz, Madzlan and Ismail, Ahmad Fauzi and Rahman, Mukhlis A. and Othman, Mohd. Hafiz Dzarfan (2015) Synthesis of graphene oxide nanosheets via modified hummers’ method and its physicochemical properties. Jurnal Teknologi, 74 (1). pp. 195-198. ISSN 0127-9696

Hao, T. J. and Mustakim, S. S. and Thilagavathy, Thilagavathy and Minghat, A. D. and Suhid, A. and Abd. Manaf, U. K. and Yet, T. S. (2020) An evaluation of moral education's in enriching student's moral behaviour. International Journal of Advanced Science and Technology, 29 (7). pp. 357-365. ISSN 2005-4238

Hapipi, N. M. and Mazlan, S. A. and Ubaidillah, U. and Aziz, S. A. A. and Khairi, M. H. A. and Nordin, N. A. and Nazmi, N. (2020) Solvent dependence of the rheological properties in hydrogel magnetorheological plastomer. International Journal of Molecular Sciences, 21 (5). ISSN 1661-6596

Haque, S. K. M. and Rey, J. A. J. and Umar, Y. and Mas’ud, A. A. and Sukki, F. M. and Jume, B. H. and Rahman, H. and Bani, N. A. (2021) Application and suitability of polymeric materials as insulators in electrical equipment. Energies, 14 (10). ISSN 1996-1073

Haron, Habibollah and Mohamed, Dzulkifli (2001) Pendekatan Pengoptimuman Dalam Penghasilan Objek Tiga Dimensi Daripada Lukisan Garisan Dua Dimensi. Jurnal Teknologi C (34C). pp. 53-62. ISSN 0127-9696

Haron, Ahmad Lutfi (2003) Portal komuniti industri kecil dan sederhana. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Haron, H. N. and Harun, H. and Ali, R. and Salim, K. R. and Hussain, N. H. (2015) Self-regulated learning strategies between the performing and non-performing students in statics. In: 2014 International Conference on Interactive Collaborative Learning, ICL 2014, 3 - 6 December 2014, Dubai, United Arab Emirates.

Haron, H. N. and Hussain, N. H. and Mohammad, R. and Ahmad, N. and Abdul Talib, H. H. and Hassan, M. Z. and Kutty, R. M. and Sarip, S. (2019) Grooming future scientists and engineers from the root through fun learning concept. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Haron, H. N. and Kamaruddin, S. A. and Harun, H. and Abas, H. and Salim, K. R. (2019) Science, technology, engineering and mathematics initiatives at rural schools and its impact on learning motivation. In: 2nd International Conference on Women in Science, Engineering and Technology, WiSET 2018, 17-19 July 2018, Kuala Lumpur Convention Centre Kuala Lumpur, Malaysia.

Haron, Habibah Norehan and Shaharoun, Awaluddin Mohamed (2011) Self-regulated learning, students' understanding and performance in engineering statics. In: 2011 IEEE Global Engineering Education Conference, EDUCON 2011. IEEE, Amman, pp. 450-459. ISBN 978-1-61284-643-9

Haron, Habibollah and Shamsuddin, Siti Mariyam and Mohamed, Dzulkifli (2004) Chain code algorithm in deriving T-Junction and region of a freehand sketch. Jurnal Teknologi D (40D). pp. 25-36. ISSN 0127-9696

Haron, Habibollah and Wulandhari, Lili A. and Sallehuddin, Roselina (2011) The mapping algorithm of triangular vertex chain code from thinned binary image. In: Second International Conference On Recent Trends In Information Processing & Computing (Ipc 2011).

Haron, Haiza Wahida (2006) Penggunan web gis oleh pihak berkuasa perancangan : tinjauan kandungan dan tahap perkhidmatan yang disediakan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Haron, N. A. and Hua, L. T. and Hassim, S. and Eftekhari, F. and Muhammad, M. T. and Harun, A. N. (2019) Strategies to improve communication management within virtual project teams. Pertanika Journal of Science and Technology, 27 (4). ISSN 0128-7680

Haron, Norhazlan (2005) Faktor-faktor yang mempengaruhi penjanaan trip ke tempat kerja dan kesan pelaksanaan teleworking dalam mengurangkan pencemaran udara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Haron, Nuzul Azam and Devi, P. and Hassim, Salihuddin and Alias, Aidi Hizami (2018) Project management practice and its effects on project success in Malaysian construction industry. In: 1st International Conference on Architecture and Civil Engineering, ICACE 2017, 8 May 2017 through 9 May 2017, Armada Hotel Petaling Jaya, Malaysia.

Haron, Suhaila and Ariffin, Aini Suzana (2018) Conceptualizing nurse professional governance to enhance performance, quality and safety of health services. Journal Of Science, Technology And Innovation Policy (JOSTIP), 4 (1). pp. 29-39. ISSN 2550-2018

Haron, Zaiton and Oldham, David and Yahya, Khairulzan and Zakaria, Rozana (2009) Modeling of sound propagation in urban streets containing trees using Markovian technique. Malaysian Journal of Civil Engineering, 21 (1). pp. 55-68. ISSN 1823-7843

Haron , Habibollah and Shamsuddin , Siti Mariyam and Mohamed, Dzulkifli (2005) A new corner detection algorithm for chain code representation. International Journal of Computer Mathematics, 82 (8). pp. 941-950. ISSN 0020-7160

Haron1, N. A. and Raja Soh, R. P. Z. A. and Harun, A. N. (2017) Implementation of building information modelling (Bim) in malaysia: A review. Pertanika Journal of Science and Technology, 25 (3). pp. 661-674. ISSN 0128-7680

Haronzah, Muhammad Fairman and Mani, Inthiran and Wan Embong, Wan Hassan (2019) Media Sosial dan Facebook Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Harris, Jeremy and Durdyev, Serdar and Tokbolat, Serik and Ismail, Syuhaida and Kandymov, Nurmurat and Mohandes, Saeed Reza (2019) Understanding construction stakeholders’ experience and attitudes toward use of the structurally insulated panels (SIPs) in New Zealand. Sustainability (Switzerland), 11 (19). p. 5458. ISSN 2071-1050

Harudin, N. and Jamaludin, K. R. and Ramlie, F. and Muhtazaruddin, M. N. and Che Razali, C. M. and W. Muhamad, W. Z. A. (2020) Binary particle swarm optimization for variables selection optimization Taguchi's T method. Matematika . pp. 69-84. ISSN 0127-9602

Harudin, Nolia and Ramlie, Faizir and Wan Muhamad, Wan Zuki Azman and Muhtazaruddin, M. N. and Jamaludin, Khairur Rijal and Abu, Mohd. Yazid and Marlan, Zulkifli Marlah (2021) Binary Bitwise Artificial Bee Colony as Feature Selection Optimization Approach within Taguchi's T-Method. Mathematical Problems in Engineering, 2021 . p. 5592132. ISSN 1024-123X

Harun, A. M. and Noor, N. F. M. and Zaid, A. and Yusoff, M. E. and Shaari, R. and Affandi, N. D. N. and Fadil, F. and Rahman, M. A. A. and Alam, M. K. (2021) The antimicrobial properties of nanotitania extract and its role in inhibiting the growth of klebsiella pneumonia and haemophilus influenza. Antibiotics, 10 (8). ISSN 207-96382

Harun, A. N. and Ahmad, R. and Mohamed, N. (2016) The effects of continuous lighting (CL) method on the growth development of brassica chinensis for led plant factory in wsn application. Jurnal Teknologi, 78 (12-3). pp. 23-30. ISSN 0127-9696

Harun, A. N. and Samad, S. A. and Nawi, M. N. M. and Haron, N. A. (2016) Existing practices of building information modeling (BIM) implementation in the public sector. International Journal of Supply Chain Management, 5 (4). pp. 166-177. ISSN 2051-3771

Harun, Ahmad Nizar and Mohamed, Norliza and Ahmad, Robiah and Abdul Rahim, Abd. Rahman and Ani, Nurul Najwa (2019) Improved Internet of Things (IoT) monitoring system for growth optimization of Brassica chinensis. Computers and Electronics in Agriculture, 164 . p. 104836. ISSN 0168-1699

Harun, Aizul Nahar and Syarifah Hasanah, Syarifah Hasanah (2018) Significant overview of Japan tourism: Muslim friendly destination and social media. In: 1st Economics and Business International Conference 2017 (EBIC 2017).

Harun, G. and Sarip, Shamsul and Abdul Fatah, A. Y. and M. Kaidi, H. and Abd. Rahim, N. (2021) Wind, hydro and solar energy challenges for technical vocational and training (TVET) electrical entrepreneur in Malaysia: a review. In: 1st International Conference of Advanced Research on Renewable Energy for Universal Sustainability, 22 June 2021 - 24 June 2021, Kuala Lumpur, Malaysia, Virtual.

Harun, Hafizah and Haron, Habibah Norehan and Ibrahim, Halijah and Kamaruddin, Azlina and Abd. Rahman, Rozana (2015) Motor competency of orang asli children from the royal Belum rainforest reserves. International Journal of Economics and Financial Issues, 5 (1S). pp. 40-44. ISSN 2146-4138

Harun, M. F. and Mohammad, R. and Othman, N. and Amrin, A. and Chelliapan, S. and Maarop, N. (2017) Methods for estimating the fatigue properties of UNS C70600 copper-nickel 90/10. International Journal of Mechanical Engineering and Technology (IJMET), 8 (11). pp. 413-422. ISSN 0976-6340

Harun, Mohammad Yusof and Che Yunus, Mohd. Azizi and Morad, Noor Azian and Ismail, Mohd. Halim Shah (2015) An industry survey of the screw press system in palm oil mills: Operational data and malfunction issues. Engineering Failure Alysis, 54 . pp. 146-149. ISSN 1350-6307

Harun, Mohd Razif and N. H. N., Hadzuin and Triwahyono, Sugeng and Abdul Jalil, Aishah (2007) Synthesis of zeolite A by ultrasound irradiation technique. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Sciences (ICoMS 2007), May 28-29, 2007, Ibnu Sina Institute, UTM.

Harun, Mohd. Razif and Shuhada, A. N. and Triwahyono, Sugeng and Abdul Jalil, Aishah (2007) Microwave irradiation technique for synthesis of zeolite A. In: International Conference on Advancement of Materials and Nanotechnology 2007, 29th May-1st June 2007, The City Bayview Hotel, Langkawi, Kedah.

Harun, Muhammad Arif and Che Sidik, Nor Azwadi (2020) A review on preparation of nanocellulose for new green working fluid in heat transfer application. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Harun, Muhammad Faiz and Mohammad, Roslina and Kotousov, Andrei (2020) Low cycle fatigue behavior of elbows with local wall thinning. Metals, 10 (2). p. 260. ISSN 2075-4701

Harun, Muhammad Faris and Ismail, Siti Haida and Abdul Raman, Norazmein and Abdullah, Haslaile (2021) Ergonomics risk factors and musculoskeletal discomfort among offshore support vessel deck and engine crews. In: 1st National Biomedical Engineering Conference, NBEC 2021, 9 November 2021 - 10 November 2021, Virtual, Online.

Harun, N. H. and Nik Mahmood, N. H. and Othman, S. A. (2020) The effect of talent management factors on teacher's leadership at the secondary school. Management Science Letters, 10 (1). pp. 225-234. ISSN 1923-9335

Harun, Noorlisa and Ibrahim, Kamarul Asri (2004) Fault detection and diagnosis, FDD via improved univariate statistical process control charts, USPC. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Harun, Nor Farida (2015) Fuel composition transients in solid oxide fuel cell gas turbine hybrid systems for polygeneration applications. PhD thesis, McMaster University, School of Graduate Studies in Partial Fulfilment of the Requirements.

Harun, Notee (2004) Pengaruh reka bentuk latihan terhadap pemindahan latihan (persepsi peserta program latihan kerajaan elektronik,institut tadbiran awam negara,kampus wilayah selatan). Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Hasan, N. A. and Goto, M. and Miyamoto, K. (2020) Analytical method on reliability of rainfall data from X-band polarimetric radar. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 - 26 November 2019, Putrajaya, Malaysia.

Hasan, Rosalyza and Mohamed Razifuddin, Nurul Adina and Che Jusoh, Nurfatehah Wahyuny and Jusoh, Rohayu and Setiabudi, Herma Dina (2018) Artocarpus integer peel as a highly effective low-cost adsorbent for methylene blue removal: Kinetics, isotherm, thermodynamic and pelletized studies. Malaysian Journal of Fundamental and Applied Sciences, 14 (1). pp. 25-31. ISSN 2289-5981

Hasannuddin, A. K. and Wira, J. Y. and S. Sarah, S. Sarah and Ithnin, Ahmad Muhsin and Aizam, S. A. and Watanabe, S. and Hirofumi, N. and Azrin, M. A. (2016) Durability studies of single cylinder diesel engine running on emulsion fuel. Energy, 94 . pp. 557-568. ISSN 0360-5442

Hasannuddin, A. K. and Wira, J. Y. and Sarah, S. and Wan Syaidatul Aqma, W. M. N. and Abdul Hadi, A. R. and Hirofumi, N. and Aizam, S. A. and Aiman, M. A. B. and Watanabe, S. and Ahmad, M. I. and Azrin, M. A. (2016) Performance, emissions and lubricant oil analysis of diesel engine running on emulsion fuel. Energy Conversion and Management, 117 . pp. 548-557. ISSN 0196-8904

Hasannuddin, A. K. and Yahya, W. J. and Sarah, S. and Ithnin, A. M. and Syahrullail, S. and Sidik, N. A. C. and Abu Kassim, K. A. and Ahmad, Y. and Hirofumi, N. and Ahmad, M. A. and Sugeng, D. A. and Zuber, M. A. and Ramlan, N. A. (2018) Nano-additives incorporated water in diesel emulsion fuel: Fuel properties, performance and emission characteristics assessment. Energy Conversion and Management, 169 . pp. 291-314. ISSN 0196-8904

Hasannuddin, A. K. and Yahya, Wira Jazair and Srithar, Rajoo and S. Sarah, S. Sarah and Ithnin, Ahmad Muhsin and Aizam, S. A. and Aiman, M. A. and Zahari, Muhammad Azahar Zikri and Watanabe, S. and Azrin, M. A and Mohd., S. S. (2016) Effect of emulsion fuel on engine emissions-A review. Clean Technologies and Environmental Policy, 18 (1). pp. 17-32. ISSN 1618-954X

Hasanuzzaman, Mohammad and Al-Amin, Abul Quasem and Khanam, Shamsunnahar and Hosenuzzaman, Md. (2015) Photovoltaic power generation and its economic and environmental future in Bangladesh. Journal of Renewable and Sustainable Energy, 7 (1). ISSN 1941-7012

Hasbollah, Dayang Zulaika Abang and Junin, Radzuan (2015) A preliminary basin scale evaluation framework of potential sedimentary basins in Malaysia for carbon dioxide sequestration. Chemical Engineering Transactions, 45 . pp. 1537-1542. ISSN 2283-9216

Hasbollah, Nur Syahirah and Md Rashid, Marjan and Ihwani, Siti Suhaila (2019) Media Sosial dan Pelajar Universiti Menurut Islam. In: Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Hasbullah, Hasrinah and Ismail, Ahmad Fauzi and Ng, B. C. and Abdullah, M. S. (2005) Effect of solvent types on structure and performance of polyethersulfone nanofiltration membrane in monovalent and divalent ions separation. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Hasham@Hisam, Rosnani and Sulaiman, Norsaupiah and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan and Che Pa, Nasrul Fikry (2003) Extraction of oleoresin from Zingiber zerumbet Rhizome: Comparative study on yield, zerumbone and curcumin content. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 1176-1179.

Hashemi-Dehkordi, Sayed-Mahdi and Mailah, Musa and Abu Bakar, Abd Rahim (2009) An active control method to reduce friction induced vibration caused by negative damping. Jurnal Mekanikal (29). pp. 19-34. ISSN 0127-3396

Hashim, Haslenda and Douglas, Peter and Elkamel, Ali and Croiset, Eric (2005) Optimization model for energy planning with CO2 emission considerations. Industrial & Engineering Chemistry Research, 44 . pp. 879-890.

Hashim, Abdul Manaf and Kasai, Seiya and Hashizume, Tamotsu and Hasegawa, Hideki (2005) Large modulation of conductance in Interdigital-Gated HEMT devices due to surface plasma wave interactions. Japanese Journal of Applied Physics, 44 . 2729-2734 . ISSN 00214922

Hashim, Jasmi and Ahmad, Norhayati and Nakamura, Yuzo and Md. Salmin, Fakhrullah and Abubakar, Mu'Azu and Mohd. Noor, Siti Fawziah and Mohd. Zaidan, Nurhanna (2015) Clay based ceramic membrane for heavy metal removal from effluent lake water. In: 13th Global Conference on Sustainable Manufacturing, 16-18 Sept, 2015, Vietnam.

Hashim, Mazlan and Seeni Mohd., Mohd. Ibrahim and Kanniah, Kasturi (2002) Remote sensing sducation in Malaysia: A systematic approach at Universiti Teknologi Malaysia. In: FIG XXII International Congress, 19-26 April 2002, Washington, D.C. USA.

Hashim, Mega Suria (2015) Pattern of wayfinding and spatial cognition for effective spatial planning of theme park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hashim, Mohamad Ghazali and Majid, Zulkepli and Sipan, Ibrahim @ Atan and Abdul Aziz, Intan Sajidah (2003) Development of river data model using object orientation concept. Project Report. UTM. (Unpublished)

Hashim, N. and Yuzir, A. and Al-Qaim, F. F. and Yahaya, N. K. E. M. (2021) Occurrence and distribution of 17 targeted human pharmaceuticals in various aquatic environmental matrices in southeast asia with particular reference to malaysia: a comprehensive review. Journal of the Mexican Chemical Society, 65 (3). ISSN 1870-249X

Hashim, Nabihah and Md. Yusoff, Nelidya and Amrin, Astuty and Asrokin, Azhari and Zainal Abidin, Ahmadun Nijar (2020) Copper line pre-qualification assessment for high-speed broadband in Malaysia. Journal of Advanced Research in Applied Mechanics, 65 (1). pp. 20-26. ISSN 2289-7895

Hashim, Noor Hazarina and Murphy, Jamie Anthony and Doina, Olaru and O'Connor, Peter (2014) Bandwagon and leapfrog effects in internet implementation. International Journal of Hospitality Management, 37 . pp. 91-98. ISSN 0278-4319

Hashim, U. Alyaa and Abu, Aminudin and Zaw, Thiha and Waziralilah, N. Fathiah and Vikneshvaran, T. and Shukor, D. Shakirah (2017) Noise source identification of vacuum cleaner using sound pressure-velocity (PU) probe. International Journal of Mechanical And Production Engineering, 5 (5). pp. 67-70. ISSN 2320-2092

Hashim, Z. H. and Yus Kelana, B. W. and Sentosa, I. and Harun, M. K. and Ho, T. C. F. and Poh, C. T. (2020) Human factors determinants of licensed aircraft engineers that influenced organizational safety performanc. International Journal of Academic Research in Business and Social Sciences . pp. 337-348. ISSN 1222-6990

Hashim, Mazlan (1996) New Textural Extraction Method Using Rolling Ball and Riping Membrane Transforms. Proceedings of Asian Conference on Remote Sensing 1996 .

Hashim, Mazlan and Abu Bakar, Abd Razak and Chek Jusoh, Chek Zainuddin and Ahmad, Samsudin (1992) Topographical Mapping from Stereo Satellite Data - Preliminary Findings. Proceeding of Asian Conference on Remote Sensing 1992 .

Hashim, Mazlan and Yusop, Zulkifli and Ibrahim, Ab. Latif and Said, Norsahida and P.Ramlee, Helmi (2005) Assessment of Impact on Landscape Development to Ecological Service Values and Goods Using Integrated Remote Sensing and GIS Techniques. Proceedings of Asian Conference on Remote Sensing 2005 .

Hashim, Shahrir (1993) Process control in injection moulding machine. Buletin FKKKSA, 7(2) . pp. 34-38. ISSN 0128-0740

Hashim, Shahrir and Rahmat, Abdul Razak (1995) Quality enhancement of plastics recycled by incorporating lubricant additives. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . B7-1.

Hasim, Nur Asmadayana and Amin, Latifah and Mahadi, Zurina and Mohamed Yusof, Nor Ashikin and Che Ngah, Anisah and Yaacob, Mashitoh and Abdul Aziz, Azwira (2019) Modern biotechnology: Applications, status, ethical issues and perspectives of researchers and industries on the key ethical principles. Akademika, 89 (1). pp. 57-69. ISSN 0126-5008

Hasnidawani, J. N. and Azlina, H. N. (2019) Surface roughness of zno-sio2 nanocoating. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, Kuala Lumpur, Malaysia, 25-26 Nov 2019.

Hassan, Azman (1989) Getah asli epoksida: perkembangan dan cabaran. Buletin FKKKSA, 3 (2). pp. 23-29. ISSN 0128-0740

Hassan, Azman and Lim, J. W. and Wahit, Mat Uzir and Rahmat, Abdul Razak (2004) Preliminary studies on the effect of polyethylene octene elastomer on polypropylene nanocomposite: mechanical properties and phase morphology. In: Proceedings of 13th Scientific Conference & 14th Annual General Meeting Electron Microscopy Society of Malaysia 2004, 13-15 December 2004, The Palm Garden Hotel, Putrajaya.

Hassan, Azman and Wahit, Mat Uzir and Ching, Yern Chee (2005) Mechanical and morphological properties of PP/LLPDE/NR blends-effect of polyoctenamer. Polymer-Plastics Technology and Engineering, 44 (7). pp. 1245-1256. ISSN 0360-2559

Hassan, A. A. G. and Saari, M. Y. and Utit, C. and Hassan, A. and Harun, M. (2016) Estimating the impact of gst on cost of production and cost of living in Malaysia. Jurnal Ekonomi Malaysia, 50 (2). pp. 15-30. ISSN 0126-1962

Hassan, Azman (1997) The application of instrumented falling weight impact test to determine the ductile-brittle transition in acrylate rubber-modified PVC. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Hassan, Azman (1991) Development and challenges of anaerobic digestion application in wastewater treatment. Buletin FKKKSA, 5 (1). pp. 39-46. ISSN 0128-0740

Hassan, Azman and Kamal, Mohd. Nazlee and Yunan, Mat Hussin (1992) UTM's role in the development of Malaysian natural resources industries. In: Conference On Development On Malaysian Natural Resources, 29-30 September 1992, Bilik Jumaah, Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Hassan, Azman and Othman, N. and Wahit, Mat Uzir and Lim, J. W. and Rahmat, A. R. and Mohd. Ishak, Z. A. (2005) Maleic anhydride polyethylene octene elastomer toughened polyamide 6/polypropylene nanocomposites: mechanical and morphological properties. In: The 8th International Symposium on Polymers For Advanced Technologies, 13-16 September, 2005, Budapest, Hungary.

Hassan, Azmi (2018) Internship framework guidelines for Malaysian Public Higher Education Institutes. Journal of Science, Technology and Innovation Policy, 4 (1). pp. 20-28. ISSN 2550-2018

Hassan, Fuad Mire (2012) Semantics-oriented ontology matching techniques for job seeker's profiles and job's description. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Hasnizom (2012) Numerical simulation of sound absorption coefficient of wood perforated wall panel with uniform small geometric patterns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, M. A. H. M. and Muda, K. and Toemen, S. and Yusof, N. Z. and Anuar, A. N. and Elias, S. H. and Othman, M. N. and Mohd. Said, M. I. and Mohamad, M. and Affam, A. C. (2016) Rhizofiltration for the enhancement of biofuel production. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2426-2433. ISSN 1819-6608

Hassan, M. Z. and Sapuan, S. M. and Rasid, Z. A. and Mohd Nor, A. F. and Dolah, R. and Md Daud, M. Y. (2020) Impact damage resistance and post impact tolerance of optimum banana-pseudo stem fiber reinforced epoxy sandwich structures. Applied Sciences (Switzerland), 10 (2). ISSN 2076-3417

Hassan, Mohamad Zaki and Nasruddin, Muhammad Asyraf and Salit, Mohd. Sapuan and Yusoff, Mohd. Zuhri (2018) Effect of cell size on the compressive properties of interlocking flax composite structures. In: 5th Mechanical Engineering Research Day (MERD'18), 3 May 2018, Kampus Teknologi UTeM, Melaka..

Hassan, Muhammad Imzan and Ahmad Nasrudin, Mohd. Hasif and Abdul Rahman, Alias (2008) An integrated Malaysian 3D cadastre. In: Advances toward 3D GIS. Penerbit UTM , Johor, pp. 217-230. ISBN 978-983-52-0584-17

Hassan, N. and Zamzuri, H. and Wahid, N. and Zulkepli, K. A. and Azmi, M. Z. (2017) Driver's steering behaviour identification and modelling in near rear-end collision. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 861-868. ISSN 1693-6930

Hassan, Noor Hafizah and Selamat, Harihodin and Kumar, Sashi (2018) A review of information technology service management (ITSM) framework for financial regulatory body. Open International Journal of Informatics (OIJI), 6 (2). pp. 1-10. ISSN 2289-2370

Hassan, Onn (1997) Particle mixing in liquid fluidised beds. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Hassan, Zulkafli and Abdul Kadir, Abdul Aziz (1991) Kajian masalah pemendapan parafin: Bahagian 1 - tinjauan terhadap masalah dan mekanisme pemendakan parafin. Buletin FKKKSA, 5 (1). pp. 25-34. ISSN 0128-0740

Hassan, Zulkafli and Madon, Bahrom (1990) Penggunaan abu sekam padi sebagai bahan gantian separa simen penggerudian. Buletin FKKKSA, 4 (1). pp. 12-18. ISSN 0128-0740

Hassan Zardari, Noor Ul and Ian, Cordery (2012) Determining irrigators preferences for water allocation criteria using conjoint analysis. Journal of Water Resource and Protection, 4 (5). pp. 249-255. ISSN 1945-3108

Hassan, Azman (1992) Sifat-sifat mekanikal dan pematangan adunan getah asli/getah asli terepoksida. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Hassan, Azman (1989) Tatacara ‘start-up’ reaktor sesekat anaerobik. Buletin FKKKSA, 3 (1). pp. 31-42. ISSN 0128-0740

Hassan, Azman and Hashim, Shahrir and You, Soon Kin (1992) Penentuan masa pematangan optimum adunan getah asli/getah asli terepoksid. Prosiding Simposium Sumber Alam Kebangsaan Pertama, 2 . pp. 71-74.

Hassan, Azman and Ismail, Ahmad Fauzi and Saidi, Hamdani (1991) Gas separation using polymeric membranes: the recent development and its future. Buletin Fakulti Kejuruteraan Kimia & Kejuruteraan Sumber Asli, 5 (2). pp. 4-12. ISSN 0128-0740

Hassan, Azman and Kamala Kannan, Sivaneswaran and Mohd, Mohd. Fadly and Zakaria, Adnan (2001) Acrylic and CPE modified PVC-U composites - effect of rice husk ash on impact properties. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 242-250.

Hassan, Azman and Rahmat, Abdul Razak and Abu Bakar, Aznizam and Ahmad, Mazatusziha (2004) Utilization of agricultural wastes as fillers in thermoplastics composites. KUSTEM Third Annual Seminar on Sustainbility Science and Management . pp. 15-19.

Hassan, Azman and Wahit, Mat Uzir and Ching, Yern Chee (2002) Effect of LLDPE on impact, flexural and morphological properties PP/NR blend. In: 11th Scientific Conference & 12th Annual General Meeting of The Electron Microscopy Society of Malaysia 2002, 17-18 December 2002, The Eden Garden Hotel, Johor Bahru, Johor. (Unpublished)

Hassan, Hashim and Saidi, Hamdani and Abdul Aziz, Ramlan (1995) Penghasilan membran gentian geronggang menggunakan spineret buatan tempatan. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A3-1.

Hassan, Onn and Stepanex, J.B. (1989) Liquid to particle heat transfer in fluidised beds. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 24-40.

Hassan, Zulkafli and Abd. Kadir, Abd. Aziz and Hamid, Mohd. Fauzi (1991) Kajian masalah pemendapan parafin (bahagian II): Pencirian minyak mentah berlilin Malaysia. Buletin FKKKSA, 5 (2). pp. 53-58. ISSN 0128-0740

Hawari, Y. and Yahya, W. J. and Sonda, I. and Kawashima, H. and Mohamad, Z. and Abu Bakar, M. A. and Abd Kadir, H. (2019) Treating palm oil mill effluent by activated sludge process using submerge mechanical aerator/agitator replacing surface aerator. Jurnal Teknologi, 81 (3). ISSN 2180-3722

Hazman, Muhammad Ajwad Wa’ie and Mohd. Nordin, Ili Najaa Aimi and Mohd. Noh, Faridah Hanim and Khamis, Nurulaqilla and Razif, M. R. M. and Faudzi, Ahmad Athif and Mohd. Hanif, Asyikin Sasha (2020) IMU sensor-based data glove for finger joint measurement. Indonesian Journal of Electrical Engineering and Computer Science, 20 (1). pp. 82-88. ISSN 2502-4752

Heiden, Patrick Van der and Pohl, Christine and Mansor, Shuhaimi and Van Genderen, John L Van (2015) The role of education and training in absorptive capacity of international technology transfer in the aerospace sector. Progress in Aerospace Sciences, 76 . pp. 42-54. ISSN 3744-6615

Helman, Nur Arina Ayuni and Mohammed Amin, Muhamad Kamal (2020) The effects of neurofeedback on Event Related Potential (ERP) in zikr meditation. In: 1st International Conference on Smart Information and Communication Technologies, SmartICT 2019, 26 - 28September 2019, Berkane, Morocco.

Hematian, A. and Yang, Y. and Lu, C. and Yazdani, S. (2016) Human motion analysis and classification using radar micro-doppler signatures. Studies in Computational Intelligence, 654 . pp. 1-10. ISSN 1860-949X

Heng, Ai Hoon (2012) Reconfigurable address generation unit for 2D correlation in FPGA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Heng, B. and Oeurng, E. and Try, S. and Yuzir, A. (2019) Flow regime alteration analysis under climate change in Tonle Sap Subbasin. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Heng, H. Y. and Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2004) Fault diagnostic algorithm for precut fractionation column. In: 18th Symposium of Malaysian Chemical Engineers (SOMChe) 2004, 13 - 14 Dec. 2004, UTP, Perak, Malaysia.

Heng, Han Yann and Ali, Mohamad Wijayanuddin and Kamsah, Mohd Zaki (2007) Fault diagnostic advisory system using moving-range chart and hazard operability study. Journal of Chemical and Natural Resources Engineering, 1 . pp. 50-70. ISSN 1823-5255

Hisan, F. N. A. N. and Othman, M. F. and Manaf, N. S. A. and Rahman, F. A. (2016) Detection of abnormalities based on gamma wave EEG signal for autism spectrum disorder. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 131-136. ISSN 2180-1843

Hishamuddin, Elina and Foo, Chwan Yee and Mohd Yunus, Rosli and Lim, Lee Ping and Ripin, Adnan (2001) Decolourization of recovered base oil from used lubricant oil: a study on the performance of composite adsorbents. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 548-552.

Ho, Chin Siong and Ali, Nor Eeda and Mohd. Akil, Azilah and Ab. Hamid, Ab. Ajib (2008) Ke Arah Kecekapan Tenaga Dalam Sektor Perumahan Bandar. Jurnal Alam Bina, 14 (5). pp. 1-31. ISSN 1511-1369

Ho, Jin How (2002) Life cycle cost analysis on corrosion remedial measures for concrete bridges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Holmes, C. and Ambran, S. and Cooper, P. A. and Webb, A. S. and Gates, J. S. and Gawith, C. B. E. and Sahu, J. K. and Smith, P. G. R. (2020) Bend monitoring and refractive index sensing using flat fibre and multicore bragg gratings. Measurement Science and Technology, 31 (8). ISSN 0957-0233

Hon, Vai Yee and How, Lian Lee and Yunan, Mat Hussin and Ismail, Ahmad Fauzi (2001) Separation of water-oil emulsion by using membrane. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 197-202.

Hong, C. and Tanaka, G. and Asako, Y. and Katanoda, H. (2018) Flow characteristics of gaseous flow through a microtube discharged into the atmosphere. International Journal of Heat and Mass Transfer, 121 . pp. 187-195. ISSN 0017-9310

Hong, Chungpyo and Asako, Yutaka and Mohammad Faghri, Mohammad Faghri and Morini, Gian Luca (2020) Average friction factor for laminar gas flow in microtubes. CFD Letters, 12 (3). pp. 22-30. ISSN 2180-1363

Hong, Chungpyo and Yutaka, Asako and Mohammad Faghri, Mohammad Faghri and Rehman, Danish and Morini, Gian Luca (2020) Experiments on measurement of heat transfer rate of gas flow through microchannel with constant wall temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (1). pp. 28-36. ISSN 2289-7879

Hong, Kai Sze and Shaikh Salleh, Sheikh Hussain (2004) Design of educational software for automatic speech recognition (asr) techniques. Jurnal Teknologi (40D). pp. 133-144. ISSN 2180-3722

Hong, W. X. and Sidik, N. A. C. and Saidur, R. (2020) Effect of surfactants on thermal conductivity of graphene based hybrid nanofluid. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Hong, Wei Xian and Che Sidik, Nor Azwadi and Aid, Siti Rahmah and Tan, Lit Ken and Asako, Yutaka (2018) Review on preparation techniques, properties and performance of hybrid nanofluid in recent engineering applications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 1-13. ISSN 2289-7879

Hong, Wei Xian and Che Sidik, Nor Azwadi and Najafi, G. (2019) Recent state of nanofluid in automobile cooling systems. Journal of Thermal Analysis and Calorimetry, 135 (2). pp. 981-1008. ISSN 1388-6150

Hordri, Nur Farhana and Ahmad, Noor Azurati and Siti Sophiayati Yuhaniz, Siti Sophiayati Yuhaniz and Sahibuddin, Shamsul and Mohd. Ariffin, Aswami Fadillah and Mohd. Saupi, Nur Afifah and Zamani, Nazri Ahmad and Jeffry, Yasmin and Md. Senan, Mohamad Firham Efendy (2018) Classification of malware mnalytics techniques: A systematic literature review. International Journal of Security and its Applications, 12 (2). pp. 9-18. ISSN 1738-9976

Hordri, Nur Farhana and Yuhaniz, Siti Sophiayati and Mohd. Azmi, Nurulhuda Firdaus and Shamsuddin, Siti Mariyam (2018) Handling class imbalance in credit card fraud using resampling methods. International Journal of Advanced Computer Science and Applications, 9 (11). pp. 390-396. ISSN 2158-107X

Hosseini, Mostafa (2012) The impact of economic recession on construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hua, D. W. and Mahmood, N. H. N. and Lin, L. C. (2017) A review on women leadership in China. Advanced Science Letters, 23 (9). ISSN 1936-6612

Huda, Miftachul and Maseleno, Andino and Mat Teh, Kamarul Shukri and Don, Abdul Ghafar and Basiron, Bushrah and Jasmi, Kamarul Azmi and Mustari, Mohd Ismail and Mohd Nasir, Badlihisham (2018) Understanding Modern Learning Environment (MLE) in Big Data Era. International Journal of Emerging Technologies in Learning (i-JET), 13 (5). pp. 71-85. ISSN 1863-0383

Huda, N. and Mohd., R. and Sultana, N. (2017) Dominant Influence of the Terminal Molecule of PNIPA Chain on Wettability. Sains Malaysiana, 46 (2). pp. 309-315. ISSN 0126-6039

Hudha, K. and Nuri, N. R. M. and Mazlan, S. A. (2019) Multi-objective optimization of vehicle speed control using gravitational search algorithm for electro-mechanical continuously variable transmission. In: International Conference on Recent Advances on Industrial Engineering and Manufacturing 2018, ICRAIEM 2018, 12-13 Dec 2018, Mercure Penang Beach Hotel Penang, Malaysia.

Hui, K. H. and Hee, Lim Meng and Leong, Mohd. Salman and Abdelrhman, Ahmed M. (2013) Time-frequency signal analysis in machinery fault diagnosis: review. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Hui, K. H. and Ooi, C. S. and Lim, M. H. and Leong, M. S. (2016) A hybrid artificial neural network with dempster-shafer theory for automated bearing fault diagnosis. Journal of Vibroengineering, 18 (7). pp. 4409-4418. ISSN 1392-8716

Hurriyati, Ratih and A., Ana and Minghat, Asnul Dahar and Sangswang, Thospon (2020) Model of purchase impulsive behavior of online consumers: case in Indonesia. International Journal of Advanced Science and Technology, 29 (7S). pp. 290-298. ISSN 2005-4238

Husain, Abdul Rashid and Ahmad, Mohamad Noh and Shah, M. B. N. (2011) Static sliding mode controller for permanent magnet stepper motor with disturbances. In: InECCE 2011 - International Conference on Electrical, Control and Computer Engineering. IEEE, Pahang, pp. 520-525. ISBN 978-161284229-5

Husain, M. K. A. and Zaki, N. I. M. and Husin, S. M. C. and Mukhlas, N. A. and Ahmad, S. Z. A.S. and Husain, N. A. and Rashidi, A. H. M. (2019) Integrated tidal marine turbine for power generation with coastal erosion breakwater. International Journal of Civil Engineering and Technology, 10 (28). pp. 1277-1293. ISSN 0976-6308

Husain, N. A. and Mohd. Rahim, N. S. and Kari, S. and Bade, A. and Chaudhry, H. (2021) The dynamic transmission map for dehazing method in single image with tropical atmospheric condition. Journal of Theoretical and Applied Information Technology, 99 (3). pp. 717-727. ISSN 1992-8645

Husaini, Muaaz Habib (2012) Throughput enhancement in long term evolution advanced through relaying strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Husin, Muhamad Rasyidi (2012) Hydroxyapatite and montmorillonite filled high density polyethylene hybrid composites for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Mustafa, Azeman (2005) Experimental and numerical studies of fluidization in a circulating fluidized bed. In: International Energy Conference 2005, 5-7 August 2005, Jakarta.

Hussain, Ahmad and Ani, Farid Nasir and Mustafa, Azeman and Mamat, Zainul Asri and Zardi, Zulfadhly and Abdul Aziz, Abdul Aziz (2005) Combustion studies of blended fuel oil as an alternative fuel for industrial gas turbines (AFTUR) and controlling NOx and soot emissions. In: 3rd Pakistan Oil, Gas & Energy Exhibition 2005, 19-20th May 2005, Karachi Expo Center, Pakistan.

Hussain, Ahmad and Ani, Farid Nasir and Sulaiman, Norzalia and Adnan, Mohammed Fadzil (2006) Combustion modelling of an industrial municipal waste combustor in Malaysia. International journal of environmental studies, 63 (3). pp. 313-329. ISSN 0020-7233

Hussain, Ahmad and Ani, Farid Nasir and Darus, Amer Nordin and Adnan, Mohammed Fadzil and Surjosatyo, Adi and Mustafa, Azeman and Salema, Arshad A. (2005) Combustion modeling of municipal waste combustor. In: 18th International Conference on Fluidized Bed Combustion (FBC 2005), May 22-25, 2005, Toronto, Ontario, Canada.

Hussain, Mohd. Nasir (2004) Rekabentuk Industri Dalam Menjana Kretiviti Jurutera. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Hussain, Noor Hamizah and Haron, Habibah @ Norehan (2018) Fun learning toy library as a passage to shape future scientists and enginners. In: Proceeding Of New Academia Learning Innovation NALI 2018 Exhibition & Competition.

Hussain, Noor Hamizah and Mohamed Nor, Norhayati and Mulop, Normah and Mohamed, Zainai and Mohd. Ismail, Kamsiah (2015) Knowledge expansion in engineering education: engineering technology as an alternative. The Asian Journal of Technology Management, 8 (1). pp. 37-46. ISSN 1978-6956

Hussain, Syed Aamer and Ahmad, Norulhusna and Shayea, Ibraheem and Mad Kaidi, Hazilah and Abdul Latiff, Liza and Mohamed, Norliza and Mohd. Sam, Suriani (2021) A review of codebook design methods for sparse code multiple access. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 927-935. ISSN 2502-4752

Hussein, Husham Idan (2012) Power system security analysis using grid computing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hussein, I. S. and Sahibuddin, S. and Nordin, M. J. and Sjarif, N. N. A. (2020) Multimodal recognition system based on high-resolution palmprints. IEEE Access, 8 . ISSN 2169-3536

Hussein, I. S. and Sahibuddin, S. B. and Nordin, M. J. and Sjarif, N. B. A. (2019) Multimodal palmprint technology: a review. Journal of Theoretical and Applied Information Technology, 97 (11). pp. 2882-2896. ISSN 19928645

Hussein, I. S. and Sahibuddin, S. B. and Nordin, M. J. and Sjarif, N. N. A. (2019) The extract region of interest in high-resolution palmprint using 2d image histogram entropy function. Journal of Computer Science, 15 (5). pp. 635-647. ISSN 1549-3636

Hussein, M. and Yoneda, K. and Zaki, Z. M. and Othman, N. A. and Amir, A. (2019) Leachate characterizations and pollution indices of active and closed unlined landfills in Malaysia. Environmental Nanotechnology, Monitoring and Management, 12 . ISSN 2215-1532

Hussein, Munirah and Yoneda, Kenichi and Mohd. Zaki, Zuhaida and Amir, Amnorzahira and Othman, Nor Ázizi (2021) Heavy metals in leachate, impacted soils and natural soils of different landfills in Malaysia: An alarming threat. Chemosphere, 267 . p. 128874. ISSN 0045-6535

Hussein, N. and Rashid, M. and Hashim, N. H. and Jamian, N. R. and Che Hassan, C. N. H. (2019) Theoretical performance of a multi-cyclone fine particulate emission control system. In: 3rd International Conference on Architecture and Civil Engineering 2019, ICACE 2019, 26-27 June 2019, Seri Pacific Hotel, Kuala Lumpur, Malaysia.

Hussein, S. F. M. and Sharifmuddin, N. B. and Al rabeei, A. O. and Faruq, A. and Noorazizi, M. S. and Zaki, S. A. and Abdullah, S. S. (2020) Black box modelling and simulating the dynamic indoor air temperature of a laboratory using autoregressive–moving-average (ARMA) model. Indonesian Journal of Electrical Engineering and Computer Science, 21 (2). pp. 791-800. ISSN 2502-4752

Hussein, S. S. and Mahrin, M. N. and Maarop, N. and Abu Bakar, N. A. (2019) Content validation of an enterprise architecture (ea) readiness assessment instrument. In: International Conference on Information System, Computer Science and Engineering, 26-27 Nov 2018, Palembang, Indonesia.

Hussein, Surya Sumarni and Mahrin, Mohd. Naz’ri and Maarop, Nurazean and Abu Bakar, Nur Azaliah (2020) Development and validation of enterprise architecture (EA) readiness assessment model. International Journal On Advanced Science, Engineering And Information Technology, 10 (1). pp. 157-163. ISSN 2088-5334

Hussin, Husnayati and Ismail, Zuraini and Suhaimi, Mohd. Adam and Abdul Karim, Noor Shahriza (2006) Examining factors influencing IT outsourcing success in Malaysian organizations. In: Australasian Conference on Information Systems (17th : 2006 : Adelaide, Australia), 6-8 Dec 2006, Adelaide.

Hussin, Mohd. Warid and Abdullah, Khairunnisa (2009) Properties of palm oil fuel ash cement based aerated concrete panel subjected to different curing regimes. Malaysia Journal of Civil Engineering, 21 (1). pp. 17-31. ISSN 1823-7843

Hussin, Nor Afina Eidura and Johari, Anwar and Kidam, Kamarizan and Hashim, Haslenda (2014) Major hazards of process equipment failures in the chemical process industry. In: 5th International Graduate Conference on Engineering, Science & Humanity (IGCESH 2014), 19-21 Aug, 2015, Johor Bahru, johor.

Hustak, Tomas and Krejcar, Ondrej and Selamat, Ali and Mashinchi, Reza and Kuca, Kamil (2015) Principles of usability in human-computer interaction driven by an evaluation framework of user actions. In: 12th International Conference on Mobile Web and Intelligent Information Systems, MobiWis 2015, 24 - 26 August 2015, Rome, Italy.

Huzaini, A. S. B. and Mohammad, R. and Othman, N. and A. Kadir, Z. (2020) Exploring of offshore medical emergency response system challenges in oil and gas environment. Journal of Environmental Treatment Techniques, 8 (1). ISSN 2309-1185

H’ng, Y. M. and Zaki, S. A. and Ahmad, N. H. and Yusup, Y. (2017) A short review on pedestrian wind assessment techniques in urban area. International Journal of Civil Engineering and Geo-Environmental, S. Pub . ISSN 2180-2742

I

Isa, N. M. and Irawati, N. and Harun, S. W. and Ahmad, F. and Rahman, H. A. and Yusoff, M. H. M. (2018) Multi-walled carbon nanotubes doped Poly(Methyl MethAcrylate) microfiber for relative humidity sensing. Sensors and Actuators, A: Physical, 272 . pp. 274-280. ISSN 0924-4247

Ismail, Mohd. Afiq and Abdul Razak, Mohd. Zulhakimi and Harun, Sulaiman Wadi and Hashim, Abdul Manaf (2021) Reduction‐controlled graphene oxide saturable absorbers and its effect on ultrashort Er‐doped fibre laser. IET Optoelectronics, 15 (1). pp. 61-68. ISSN 1751-8768

I Ali, Raja Normala (2004) The implication of e-commerce on indirect tax revenue : a case study. Masters thesis, Universiti Teknologi Malaysia.

I., Norhayati and M. Rashid, M. Rashid (2018) Adaptive neuro-fuzzy prediction of carbon monoxide emission from a clinical waste incineration plant. Neural Computing and Applications, 30 (10). pp. 3049-3061. ISSN 0941-0643

Ibrahim, Hanan Moawia and Wan Yusoff, Wan Mokhtar and Abdul Hamid, Aidil and Md. Illias, Rosli and Hassan, Othman and Omar, Othman (2005) Optimization of medium for the production of β-cyclodextrin glucanotransferase using Central Composite Design (CCD). Process Biochemistry, 40 . pp. 753-758. ISSN 0032-9592

Ibrahim, Zuwairie and Kurniawan, Tri Basuki and Khalid, Marzuki (2008) A DNA sequence design for molecular computation of HPP with output visualization based on real-time PCR. 2007 IEEE Congress on Evolutionary Computation, CEC 2007, 1-10 . pp. 1823-1828. ISSN 0128-4428

Ibrahim, Amgad Ahmed Ali and Md. Ibrahim, Nik Noor Nabilah and Centeno, Anthony and Hashim, Abdul Manaf (2018) A short review of architecture and computational analysis in the design of graphene-based bioelectronic devices. Sensors and Materials, 30 (6). pp. 1231-1252. ISSN 0914-4935

Ibrahim, Imanurfatiehah and Mohd. Khairuddin, Anis Salwa and Arof, Hamzah and Yusof, Rubiyah and Hanafi, Effariza (2018) Statistical feature extraction method for wood species recognition system. European Journal of Wood and Wood Products, 76 (1). pp. 345-356. ISSN 0018-3768

Ibrahim, Intisar and Ali, Rosmah and Mohamad Zulkefli, Mohamad Zulkefli and Elfadil, Nazar (2015) Embedded systems pedagogical issue: teaching approaches, students readiness, and design challenges. American Journal Of Embedded Systems And Applications, 3 (1). pp. 1-10. ISSN 2376-6085

Ibrahim, M. S. and Hassan, M. Z. and Ibrahim, I. and Ibrahim, M. H. and Daud, M. Y. and Bani, M. A. (2019) Life-cycle assessment on the highway street lantern using weibull probability approach. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16-17 July 2018, Johor Bahru, Johor, Malaysia.

Ibrahim, Mohamad Asri and Wahab, Mohammad Hussaini and Mohmad Shukri, Sharyzee (2018) Revealing urban marketplace identity: PUDU. Planning Malaysia, 16 (1). pp. 183-192. ISSN 1675-6215

Ibrahim, Mohd Halim Irwan and Muhamad, Norhamidi and Sulong, Abu Bakar and Jamaludin, Khairur Rijal and Mohamad Nor, Nor Hafiez and Ahmad, Sufizar and Harun, Mohd Ruzi and Zakaria, Hafizawati (2010) Parameter optimization towards highest micro MIM density by using Taguchi method. In: 9th Asia-Pacific Conference on Materials Processing, APCMP2010, 7 June 2010 through 10 June 2010, Sydney, NSW, Australia.

Ibrahim, N. A. and A. Rahman, S. A. S. and Ismail, S. H. and Abdullah, H. (2020) Musculoskeletal discomfort evaluation using quick exposure check (QEC) among tower crane operators. In: 6th International Conference on Advances in Mechanical Engineering 2019, ICAME 2019, 14 August 2019 - 16 August 2019, Pacific Sutera Harbour Kota Kinabalu, Sabah, Malaysia.

Ibrahim, Noraini and Wan Kadir, Wan Mohd. Nasir and Deris, Safaai (2008) Comparative evaluation of change propagation approaches towards resilient software evolution. In: Proceedings - The 3rd International Conference on Software Engineering Advances, ICSEA 2008, Includes ENTISY 2008: International Workshop on Enterprise Information Systems, 26-31 Oct. 2008.

Ibrahim, Norkhair (Penterjemah) and Majid, Zulkepli (Penterjemah) (2002) Prinsip sistem maklumat geografi. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0275-3

Ibrahim, Roslina and Abu Bakar, Nur Azaliah and Chuprat, Suriayati and Amron, Mohd. Talmizie (2018) Preliminary study on the implementation of 1GovCloud among public agencies in Malaysia. Open International Journal of Informatics (OIJI), 6 (4). pp. 93-103. ISSN 2289-2370

Ibrahim, Roslina and Ismail, Rozana (2018) Fun elements in educational game design to boost students learning experience. In: New Academia Learning Innovation (NALI) Symposium 2018.

Ibrahim, Roslina and R. Azami, Husna Hafiza (2018) A systematic literature review on acceptance of massive open online courses (MOOCS). In: New Academia Learning Innovation (NALI) Symposium 2018.

Ibrahim, Suhaimi (2006) A document-based software traceability to support change impact analysis of object-oriented software. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim, Suhaimi and Muhammad, Shahid (2011) An evaluation of test coverage tools in software testing. In: International Conference On Telecommunication Technology And Application (Ictta 2011).

Ibrahim, Thamir K. and Mohammed, Marwah N. and Mohammed, Mohammed Kamil and Najafi, G. and Che Sidik, Nor Azwadi and Basrawi, Firdaus and Abdalla, Ahmed N. and Hoseini, S. S. (2018) Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer, 118 . pp. 832-846. ISSN 0017-9310

Ibrahim H.a, Nawi A.M.b, Ali A., (2019) The depiction of metaphorical aspects in the selected literary work by the American dramatist Eugene O'Neill. UNSPECIFIED thesis, UNSPECIFIED.

Ibrahim, Kamarul 'Asri (1997) Application of partial correlation in active statistical process control. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Ibrahim, Kamarul 'Asri (1992) Development of direct digital control for ethanol fermentation process. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Ibrahim, Kamarul 'Asri (1990) Modelling a cell recycle fermenter using Zymomonas Mobilis: steady state analysis. Buletin FKKKSA, 4 (1). pp. 51-57. ISSN 0128-0740

Ibrahim, Kamarul Asri and Ali, Mohamad Wijayanuddin and Mohd. Ekhsan, Abdul Wahid (1992) Development of methyl ester using batch enzymatic reaction. Buletin FKKKSA, 6 (2). pp. 20-24. ISSN 0128-0740

Ichwan, B. and Mazlan, S. A. and Imaduddin, F. and Ubaidillah, Ubaidillah and Koga, T. and Idris, M. H. (2016) Development of a modular MR valve using meandering flow path structure. Smart Materials and Structures, 25 (3). ISSN 0964-1726

Ichwan, Burhanuddin and Mazlan, Saiful Amri and Imaduddin, Fitrian and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi (2015) Design and performance analysis of magnetorheological valve module with annular-radial concept. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7743-7748. ISSN 1819-6608

Idrees, M and Lim, Yan and Saidi, Hamdani (1995) Synthesis and characterization of ceramic (alumina) membrane sheet. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A2-1.

Idrees, M and Sathiavathy, D and Saidi, Hamdani (1995) Synthesis and characterization of alumina membranes by sol-gel technique. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . A1-1.

Idris, Ahmad Kamal and Ikhsan, Azman and Ismail, Issham (1997) Kejuruteraan petroleum : prinsip dan amalan. In: Petroleum engineering : principles and practice. Penerbit UTM, Skudai, Johor. ISBN 983-52-0091-2

Idris, Ani and Ahmad, Iqbal (2007) Cellulose acetate-polyethersulfone (CA-PS) blend ultrafiltration membranes for palm oil mill effluent treatment. In: International Conference on Environment: Survival and Sustainbility 2007, 19-24 February 2007, Nicosla-Northen Cyprus.

Idris, Ani and Ahmed, Iqbal and Ho, Wan Jye (2007) Performance of cellulose acetate-polyethersulfone blend membrane prepared using microwave heating for palm oil mill effluent treatment. In: International Conference on Water Management and Technology Applications in Developing Countries, 14-16 May 2007, Kuala Lumpur Convention Centre, Malaysia.

Idris, Ani and Lee, Kuan Yet (2005) Effect of solvent/additives ratio on cellulose acetate dialysis membrane formation and urea clearance. In: Advanced Technology Congress, 6-8 December 2005, Putrajaya Marriott Hotel, Putrajaya.

Idris, Ani and Mat Zain, Norashikin (2005) Concentration influence of different additives on performance of asymmetric polyethersulfone (PES) ultrafiltration flat sheet membranes. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Idris, Ani and Wahidin, Suzana (2005) Effect of Na-alginate and bead diameter on lactic acid production from pineapple waste using immobilized Lactobacillus delbrueckii ATCC 9646. In: The 4th Asia-Pasific Chemical Reaction Engineering Symposium APCRE 05, June 12-15, 2005, Gyeongju, Korea.

Idris, Ani and Wahidin, Suzana (2004) Effect of temperature and pH on lactic acid fermentation from liquid pineapple waste using immobilized lactobacillus delbrueckii ATCC 9649. In: Regional Symposium on Chemical Engineering 2004, December 1-3, 2004, The Grand Hotel, Bangkok, Thailand.

Idris, Ahmad Muzammil and Ho, Wai Shin and Hui, Liu Wen and Ramli, Ahmad Fakrul and Mohtar, Aminullah and Hashim, Haslenda and Muis, Zarina Ab and Lim, Jeng Shiun and Liew, Peng Yen (2018) Water-Energy Nexus Cascade Analysis (WENCA) for simultaneous water-energy system optimisation. Chemical Engineering Transactions, 63 . pp. 271-276. ISSN 2283-9216

Idris, Ani and Ahmed, Iqbal and Nihal Ah., Ansari Akhlaque Ah. and Mohd Noor, Nur Diana (2007) Influence of lithium flouride additive on polyethersulfone membranes. In: 14th Regional Symposium On Chemical Engineering 2007, December 4-5, 2007, Melia Purosani Hotel, Yogyakarta, Indonesia.

Idris, Ani and Chan, Mieow Kee and Ahmed, Iqbal (2007) Effect of monosodium glutamate additive on the performance of dialysis membrane. In: 21st Symposium of Malaysian Chemical Engineers SOMChE 2007, 12th-14th December 2007, Universiti Putra Malaysia.

Idris, Ani and Hassan, Nursia and Mohd. Ismail, Nur Suriani and Misran, Effaliza and Mohd. Yusof, Noordin and Ngomsik, Audrey-Flore and Bee, Agnes (2009) Photocatalytic magnetic separable beads for chromium (VI) reduction. Water Research, 44 (6). pp. 1683-1688. ISSN 0043-1354

Idris, M. H. and Imaduddin, F. and Ubaidillah, Ubaidillah and Mazlan, S. A. and Choi, S. B. (2020) A concentric design of a bypass magnetorheological fluid damper with serpentine flux valve. Actuators, 9 (1). ISSN 2076-0825

Idris, Ahmad Kamal and Ikhsan, Azman and Kasmungin, Sugiatmo and Siew, Wu Yow (2001) Kesan nisbah mobiliti terhadap kecekapan penempatan gel. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 203-210.

Idris, Ahmad Kamal and Ismail, Issham and Othman, Ariff and Ha, Kwong Tak (1994) The use of Malaysian ilmenite as weighting material in drilling mud. Proceedings of International Conference in Recent Advances in Materials and Mineral Resources '94 .

Idris, Ani and Ismail, Ahmad Fauzi and Shilton, S. J. (2001) A study of extrusion shear in the spinning of cellulose acetate hollow fiber membranes for reverse osmosis. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 127-132.

Idris, Ani and Lee, K. Y. (2004) Preparation of flat sheet cellulose acetate dialysis membrane, suitable for clearance of urea solution. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 2-28.

Idrus, S. M. and Rais, S. S. and Ramli, A. (2008) Bandwidth Analysis of Bootstrap Transimpedance Amplifier for Optical Free Space Receiver. Elektrika, 10 (1). pp. 13-19. ISSN 0128-4428

Idrus, Intan Izafina and Abdul Latef, Tarik and Aridas, Narendra Kumar and Abu Talip, Mohamad Sofian and Yamada, Yoshihide and Tengku Mohmed Noor Izam, Tengku Faiz and Abd. Rahman, Tharek (2020) Design and characterization of a compact single-layer multibeam array antenna using an 8×8 Butler matrix for 5G base station applications. Turkish Journal of Electrical Engineering and Computer Sciences, 28 (2). pp. 1121-1134. ISSN 1300-0632

Idrus Sutan Nameh, Sevia Mahdaliza and Hassin, Ahmad Farid (2008) Wireless internet connection in Malaysia. In: Communication Services In Malaysia. Penerbit UTM, Johor, pp. 25-29. ISBN 978-983-52-0657-3

Ihsan, Nurashikin (2012) Potential use of oil palm empty fruit bunch for bioethanol production by locally isolated yeast. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Ikhsan, Azman (1989) CAI dalam pembelajaran dan pengajaran kejuruteraan petroleum. Buletin FKKKSA, 3 (1). pp. 55-59. ISSN 0128-0740

Imaduddin, F. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Idris, M. H. and Bahiuddin, I. (2017) Characterization and modeling of a new magnetorheological damper with meandering type valve using neuro-fuzzy. Journal of King Saud University - Science, 29 (4). pp. 468-477. ISSN 1018-3647

Imaduddin, F. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Zamzuri, H. and Fatah, A. Y. A. (2016) Testing and parametric modeling of magnetorheological valve with meandering flow path. Nonlinear Dynamics, 85 (1). pp. 287-302. ISSN 0924-090X

Imaduddin, Fitrian (2015) A novel magnetorheological valve with meandering flow path structure. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Imaduddin, Fitrian and Mazlan, Saiful Amri and Zamzuri Hairi, Yazid and Mohd. Yazid, Izyan Iryani (2015) Design and performance analysis of a compact magnetorheological valve with multiple annular and radial gaps. Journal of Intelligent Material Systems and Structures, 26 (9). pp. 1038-1049. ISSN 1045-389X

Imtihan, Muhammad Rofi and Ngadiman, Mohd. Salihin and Haron, Habibollah (2008) An alternative model for ERP maintenance strategy. In: Proc. 9th ACIS Int. Conf. Software Engineering, Artificial Intelligence, Networking and Parallel/Distributed Computing, SNPD 2008 and 2nd Int. Workshop on Advanced Internet Technology and Applications , 6-8 Aug. 2008 .

Inagaki, A. and Kanda, M. and Ahmad, N. H. and Yagi, A. and Onodera, N. and Aoki, T. (2017) A Numerical Study of Turbulence Statistics and the Structure of a Spatially-Developing Boundary Layer Over a Realistic Urban Geometry. Boundary-Layer Meteorology, 164 (2). pp. 161-181. ISSN 0006-8314

Iqbal, T. and Rani, W. N. M. W. M. and Wahab, M. H. (2020) Regenerating the identity in historic waterfront: A case study of Central Market Waterfront, Kuala Lumpur. In: 10.1088/1755-1315/409/1/0120011st International Conference on Urban Design and Planning, ICUDEP 2019, 10September 2019, Semarang, Indonesia.

Irwan, M. A. M. and Nor Azwadi, C. S. and Asako, Y. (2020) Revisiting tin melting for phase change model verification. In: International Conference on Sustainable Energy and GreenTechnology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Irwan, M. A. M. and Nor Azwadi, C. S. and Asako, Y. and Ghaderian, J. (2020) Review on numerical simulations for nano-enhanced phase change material (NEPCM) phase change process. Journal of Thermal Analysis and Calorimetry, 141 (2). pp. 669-684. ISSN 1388-6150

Ishak, Fadzil Adly and Johari, Muhd. Khudri and Dolah, Rozzeta (2018) A case study of LEAN application for shortest lead time in composite repair shop. International Journal of Engineering & Technology, 7 (4.13). pp. 112-119. ISSN 2227-524X

Ishak, I. A. and Ali, M. S. M. and Shaikh Salim, S. A. Z. (2017) Mesh size refining for a simulation of flow around a generic train model. Wind and Structures, An International Journal, 24 (3). pp. 223-247. ISSN 1226-6116

Ishak, Iryatie and Muhammad, Ida Idayu (2007) The development of biodegradable plastic with natural colourant as packaging material. In: National Research And Innovation Competition (NRIC) 2007.

Ishak, Iskandar Shah (2012) Unsteady aerodynamic wake of helicopter main-rotor-hub assembly. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Izuan Amin and Mat Ali, Mohamed Sukri and Mohd. Yakub, Mohamad Fitri and Shaikh Salim, Sheikh Ahmad Zaki (2019) Effect of crosswinds on aerodynamic characteristics around a generic train model. International Journal of Rail Transportation, 7 (1). pp. 23-54. ISSN 2324-8378

Ishak, M. I. and Ahmad Shafi, A. and Abdul Kadir, M. R. and Sulaiman, E. (2017) Effect of ferrule height and post length on mechanical stress and displacement of endodontically treated maxillary central incisor: a finite element analysis. Journal of Medical and Biological Engineering, 37 (3). pp. 336-344. ISSN 1609-0985

Ishak, Mohd. Yunus (2012) Shear behaviour of reinforced concrete beams strengthened with carbon fibre reniforced polymer fabrics. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Norafeezah and Dziyauddin, Rudzidatul Akmam and Abdullah, Haslaile (2015) Supplier selection procedure in telecommunication industry. In: International Conference on Business, Management, Tourism and Hospitality 2015 (BIZMATOUR 2015), 12-14 May, 2015, Melaka, Malaysia.

Ishak, Norafeezah and Dziyauddin, Rudzidatul Akmam and Abdullah, Haslaile (2015) Supplier selection procedure in telecommunication industry. Advanced Science Letters, 21 (6). pp. 1658-1661. ISSN 1936-6612

Ishak, Nurul Arafah (2012) Lead time in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishaku, H. T. and Majid, M. Rafee and Johar, Foziah (2006) Urban tourism in developing countries: in the case of Melaka (Malacca) City, Malaysia. Anatolia, 17 . pp. 1-11. ISSN 13032917

Ishimatsu, Jun and Isobe, Hiromi (2016) Thermal effects of ultrasonically excited grinding fluid. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7794-7798. ISSN 1819-6608

Islam, A. K. M. Muzahidul (2012) A collision detection enabled dynamic cluster-based wireless sensor network. In: MJIIT-JUC Symposium 2012 (MJJS2012), 21-23/12/12.

Ismail, Abdul Razak and Lim, Felix Choong Hooi (1995) Water-based mud formulations in drilling Terengganu shale formation. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C16-1.

Ismail, Ahmad Fauzi and Khoo, T. C. and Kusworo, T. D. (2005) Performance of sealed lead acid battery enhanced by gas separation membrane technology. In: International Membrane Conference in Taiwan, 2005 (IMCT 2005), Aug. 18-19, Chung-Li, Taiwan.

Ismail, Ahmad Fauzi and Kusworo, T. D. (2005) Advanced materials for membrane-based gas separation technology. In: 3rd Regional Symposium On Membrane Science and Technology 2005 , 26-27 April.

Ismail, Ahmad Fauzi and Kusworo, Tutuk Djoko and Mustafa, Azeman and Hasbullah, Hasrinah (2005) Understanding the solution-diffusion mechanism in gas separation membrane for engineering students. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

Ismail, Ahmad Fauzi and Lai, Ping Yean (2001) Application of membrane separation in biotechnology. In: National Biotechnology Seminar 2001, 10-13 November 2001, Pulau Pinang. (Unpublished)

Ismail, Ahmad Fauzi and Rahman, M. A. and Mustafa, A. (2006) Effect of coagulation bath temperature and polymer composition on the fabrication and characteristics of PAN precursor fiber in the solvent-free coagulation process. In: 2nd National Carbon Fiber Conference 2006, 6th-9th June 2006, The City Bayview Hotel, Langkawi.

Ismail, Ahmad Fauzi and Rahman, M. A. and Mustafa, A. (2006) On the fabrication and characteristics of PAN precursor fiber in the solvent-free coagulation process. In: 2nd National Carbon Fiber Conference 2006, 6th-9th June 2006, The City Bayview Hotel, Langkawi.

Ismail, Ahmad Fauzi and Rahman, M. A. and Mustafa, A. and Ng, B. C. and Hasbullah, Hasrinah and Rahaman, M. S. A. and Abdullah, M. S. (2006) Effects of residence time on the characteristics of PAN-based fibers and its fabrication through solvent-free coagulation process. In: 2nd National Carbon Fiber Conference 2006, 6th-9th June 2006, The City Bayview Hotel, Langkawi.

Ismail, Issham (2008) Fakulti gemilang, graduat terbilang. Faculty of Chemical & Natural Resources Engineering, UTM Skudai.

Ismail, Issham (1995) Penggunaan injap keselamatan subpermukaan berpengawalan permukaan di dalam telaga di luar pesisir Terengganu untuk era 1980-an dan 1990-an. Buletin FKKKSA, 9 (1). pp. 7-16. ISSN 0128-0740

Ismail, Issham and Thanapala Singam, Murugesu (2005) A study of formation damage caused by oil-based mud in dynamic condition. Jurnal Teknologi F (43F). pp. 85-94. ISSN 0127-9696

Ismail, N. A and O'Brien, E. A (2008) Enabling multimodal interaction in web-based personal digital photo browsing. In: International Conference on Computer and Communication Engineering 2008, 13 to 15 May 2008 , Kuala Lumpur. (Unpublished)

Ismail, Zuraini (2006) Moderating Impact of IT Outsourcing Arrangements in a Muslim Country. In: International Conference on ICT for Islam (ICT4M) 2006 (2006 : Kuala Lumpur, Malaysia), 21-23 November 2006, Hilton Hotel Kuala Lumpur, Malaysia.

Ismail, A. and Dolah, R. and Miyagi, Z. (2016) Factors identification on optimization of ball placement tool for flip-chip- ball-grid-array product. Jurnal Teknologi, 78 (1). pp. 175-179. ISSN 0127-9696

Ismail, Abdul Samed and Shamsuddin, Siti Mariyam and Ali, Waleed (2011) Intelligent web proxy caching approaches based on support vector machine. In: The International Conference On Informatics Engineering & Information Science (Icieis 2011).

Ismail, Ahmad Fauzi and Aroon, M. A. and Montazer-Rahmatib, M. M. and Matsuuraa, T. (2010) Morphology and permeation properties of polysulfone membranes for gas separation: effects of non-solvent additives and co-solvent. Separation and Purification Technology, 72 (2). 194 - 202. ISSN 1383-5866

Ismail, Ahmad Fauzi and Saidi, Hamdani and Abdul Rahman, Ali (1993) Numerical solution of a mathematical model for hollow-fiber membrane gas separation system. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 3-1.

Ismail, Ahmad Fauzi and Salim, Mohd. Razman and Bolong, N. and Ranad, D. and Matsuurad, T. and Tabe-Mohammadi, A. (2010) Negatively charged polyethersulfone hollow fiber nanofiltration membrane for the removal of bisphenol A from wastewater. Separation and Purification Technology, 73 (2). 92 - 99. ISSN 1383-5866

Ismail, E. I. and Ahmad, F. and Shafie, S. and Yahaya, H. and Latif, A. A. and Muhammad, F. D. (2020) Copper nanowires based mode-locker for soliton nanosecond pulse generation in erbium-doped fiber laser. Results in Physics, 18 . p. 103228. ISSN 2211-3797

Ismail, Elsayeda and Zolkopli, S. Muhammad Ashraf and Lokman, Muhammad Quisar and Yahaya, Hafizal and Wadi Harun, Sulaiman and Ahmad, Fauzan (2018) Q-switched erbium doped fiber laser incorporating antimony (III) telluride in polyvinyl alcohol as saturable absorber. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 409-415. ISSN 2502-4752

Ismail, Faiz and Muhamad, Rahimah (2018) Risk assessment of tower crane operation in high rise construction. Journal Of Advanced Research In Occupational Safety And Health, 1 (1). pp. 32-38. ISSN 2637-0255

Ismail, Ima Rashidah and Daruis, Rusni and Abdul Manaf, Azizah and Mohd. Daud, Salwani (2012) An overview of digital preservation strategies for cultural heritages. In: Advanced Informatics 1. Issues in Advanced Informatics 1. (In Press)

Ismail, Issham and Othman, Ariff and Idris, Ahmad Kamal and Mohd. Johan, Zulkifli and Ha, Kwong Tak (1994) Penggunaan bahan asas besi tempatan sebagai bahan pemberat dalam lumpur penggerudian. Proceedings of Malaysian Science and Technology Congress '94 . pp. 161-166.

Ismail, Issham and Samsuri, Ariffin (2000) Petroleum geology. In: Asas petroleum. Penerbit UTM. ISBN 983-52-0193-5

Ismail, Kamarulafizam and Shaikh Salleh, Sheikh Hussain and Yahya, Zuraimi and Jamaludin, Mohd. Najeb and Ganesah, J. (2007) Wireless heart sound data acquisition using bluetooth. In: Recent Advancement In Biomedical Engineering. Penerbit UTM , Johor, pp. 63-71. ISBN 978-983-52-0559-0

Ismail, M. A. and Muhamad, P. and Abu, A. (2016) Modelling and design smart controller of magneto rheological using bouc-wen and sim model for motorcycle suspension system. Jurnal Teknologi, 78 (6-13). pp. 31-36. ISSN 0127-9696

Ismail, M. H. and Ali, M. S. M. and Shaikh, S. A. Z. and Shirakashi, M. and Muhamad, S. (2017) Flow induced vibration of a square cylinder with high scruton number. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3068-3075. ISSN 1819-6608

Ismail, M. I. M. and Dziyauddin, R. A. and Ahmad, N. A. and Ahmad, N. (2018) Vibration detection in water pipelines leakage using wireless three-axis accelerometer sensor. International Journal of Advanced Science and Technology, 112 . pp. 137-150. ISSN 2005-4238

Ismail, Mazlan (2005) The influence of intellectual capital on the performance of Telekom Malaysia. PhD thesis, Universiti Teknologi Malaysia, Business & Advanced Technology Centre.

Ismail, Mohd Shawal and Khor, Shaw Zhan and Mohamad, Ahmad Marzuki (2019) Media Sosial dan Impak Terhadap Psikologi Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Ismail, N. A. and Shameli, K. and Che Jusoh, N. W. and Rasit Ali, R. (2020) Effect of size and shape dependent of synthesized copper nanoparticle using natural honey. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Ismail, N. H. F. and Abu Husain, N. and Mansor, M. S. F and Baharuddin, M. M. and Mohd Zaki, N. I. and Abu Husain, M. K. and Ma’aram, A. and Wiyono, A. S. and Chaiyakul, T. and Ahmad, Y. (2019) Child presence detection system and technologies. Journal of the Society of Automotive Engineers Malaysia, 3 (3). pp. 290-297. ISSN 2550-2239

Ismail, R. and Ibrahim, R. and Yaacob, S. (2019) Participatory design method to unfold educational game design issues: a systematic review of trends and outcome. In: 5th International Conference on Information Management, ICIM 2019, 24-27 March 2019, Trinity Hall, University of Cambridge, Cambridge, United Kingdom.

Ismail, R. and Sudar, N. and Soupiansoupian, M. H. and Ibrahim, R. and Abd. Hamid, S. Z. and Md. Kamalullai, N. N. and Bahari, R. B. and Shahran, M. A. and Mohd. Nazli, N. A. A. (2020) Gamified your learning in the classroom: designing and developing and educational game prototype as a formative assessment for diploma students in UTMSPACE Malaysia. Journal of Advanced Research in Dynamical and Control Systems, 12 (3). pp. 540-546. ISSN 1943-023X

Ismail, S. and Mohd. Zaki, N. I. and Abu Husain, M. K. (2019) Managing health risk among shift workers in the oil and gas industry in Malaysia. International Journal of Civil Engineering and Technology, 10 (1). ISSN 0976-6308

Ismail, Syuhaida and Ismail, Syuhaida and Mohd. Arof, Khairul Zahreen (2018) Current practice, understanding and perception on contactors performance appraisal system in the Malaysian construction industry. In: 2nd International Conference on Architecture and Civil Engineering (ICACE 2018).

Ismail, Syuhaida and Saleh, Abd. Latif and Mohd. Arof, Khairul Zahreen (2018) Critical success factors of contractors performance appraisal system in Malaysian construction industry. In: The 5th International Conference on Quantitative Sciences and Its Applications (ICOQSIA 2018).

Ismail, Syuhaida and Wahab, Mohammad Hussaini and Che Amat, Rohayah and Wan Mohd. Rani, Wan Nurul Mardiah and Zakaria, Zaamuddin (2018) Fire hazard assessment during construction phase: case study of a mixed-use development project in Kuala Lumpur. In: 2nd International Conference on Architecture and Civil Engineering (ICACE 2018).

Ismail, Z. H. and Jalaludin, N. A. (2016) River flow and stage estimation with missing observation data using Multi Imputation Particle Filter (MIPF) method. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 145-150. ISSN 2180-1843

Ismail, Z. H. and Mokhar, M. B. M. and Putranti, V. W. E. and Dunnigan, M. W. (2016) A robust dynamic region-based control scheme for an autonomous underwater vehicle. Ocean Engineering, 111 . pp. 155-165. ISSN 0029-8018

Ismail, Z. H. and Muharram, I. A. M. (2016) Calibration of a drag tilt current velocimeter for an open channel application. Jurnal Teknologi, 78 (6-13). pp. 89-94. ISSN 0127-9696

Ismail, Zamri (2012) Accuracy assessment Of Digital Elevation Model (DEM) from airborne lidar over different land cover types in Malaysia. In: 11th International Symposium & Exhibition on Geoinformation (ISG2012), 2012.

Ismail, Zamri and Said, Mohamad Nor (2004) GIS application for school information and management system. Project Report. UTM. (Unpublished)

Ismail, Zool H. and Bukhori, Iksan (2021) Efficient detection of robot kidnapping in range finder-based indoor localization using quasi-standardized 2D dynamic time warping. Applied Sciences (Switzerland), 11 (4). pp. 1-18. ISSN 2076-3417

Ismail, Zool Hilmi and Chun, Alan Kh'ng Kean and Razak, Mohd. Ibrahim Shapiai (2019) Efficient herd – outlier detection in livestock monitoring system based on density – Based spatial clustering. IEEE Access, 7 . pp. 175062-175070. ISSN 2169-3536

Ismail, Zool Hilmi and Jalaludin, Nor Anija (2019) Robust data assimilation in river flow and stage estimation based on multiple imputation particle filter. IEEE Access, 7 . pp. 159226-159238. ISSN 2169-3536

Ismail, Zool Hilmi and Mohd. Hamami, Mohd. Ghazali (2021) Systematic literature review of swarm robotics strategies applied to target search problem with environment constraints. Applied Sciences (Switzerland), 11 (5). p. 2383. ISSN 2076-3417

Ismail, Zuraini and Hussin, Husnayati and Suhaimi, Mohd. Adam and Abdul Karim, Nor Shahriza (2005) Knowledge sharing role in IT outsourcing. In: International Conference on Knowledge Management (ICKM) 2005, 7 - 9th July 2005, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Ismail, Zuraini and Sabeil, Elfadil and Abdul Manaf, Azizah (2011) Analysing the quality assurance of trainee's competency assessment and acrediation of cyber forensic education/training programs. In: 2011 The 3rd International Conference On Machine Learning And Computing (ICMLC 2011).

Ismail, Abdul Razak and Hamid, Mohd. Fauzi and Abdul Manan, Muhammad (1998) Prestasi reservoir. In: Prinsip pengeluaran tenaga minyak. Penerbit UTM, Skudai, Johor Bahru, Malaysia, pp. 1-11. ISBN 983-52-0096-3

Ismail, Abdul Razak and Ng, Chong Yeow (2001) The effects of viscosifiers on Terengganu k-shale hydration. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 456-460.

Ismail, Issham (1998) Asas pelengkapan telaga. Asas pelengkapan telaga . pp. 1-139.

Ismail, Issham (1992) Multiphase flow correlations (Part 1): Development and applications. Buletin FKKKSA, 6 (1). pp. 26-31. ISSN 0128-0740

Ismail, Issham (2003) Operasi pelengkapan telaga. In: Operasi pelengkapan telaga (well completion operation). Penerbit UTM, Skudai, Johor Bahru, Malaysia. ISBN 983-52-0299-0

Ismail, Issham (1994) Penggunaan lumpur dasar minyak dalam industri penggerudian petroleum. Buletin FKKKSA, 8(2) . pp. 6-9. ISSN 0128-0740

Ismail, Issham (1993) Penggunaan penyendat pengeluaran dalam telaga minyak di luar pesisir Terengganu sekitar akhir tahun 1980-an. Buletin FKKKSA, 7(2) . pp. 1-7. ISSN 0128-0740

Ismail, Issham (1994) Pengujian penyelaku aliran berbilang fasa dalaman. Buletin FKKKSA, 8(1) . pp. 23-27. ISSN 0128-0740

Ismail, Issham (1991) The importance of infill drilling in a mature offshore field. Buletin FKKKSA, 5 (2). pp. 24-28. ISSN 0128-0740

Ismail, Issham and Abdul Kadir, Abdul Aziz (1997) Evaluating the performance of Malaysia Hematite and its mixtures with barite as weighting material in water-based mud. Proceedings of Regional Symposium on Chemical Engineering 1997, 1 . pp. 336-346.

Ismail, Issham and Abdul Karim, Mohd Ghazali and Abdul Manan, Muhammad and Abdul Razak, Mohd. Razif (1992) Kajian aliran dua fasa dalam sudut-sudut yang berlainan (Bahagian 1). Buletin FKKKSA, 6 (2). pp. 16-19. ISSN 0128-0740

Ismail, Issham and Hassan, Zulkafli (1989) Ciri keselamatan peralatan gas. Buletin FKKKSA, 3 (1). pp. 49-53. ISSN 0128-0740

Ismail, Issham and Idris, Ahmad Kamal and Samsuri, Ariffin (1993) Pembangunan projek perumahan dalam kawasan bekas lapangan minyak. Buletin FKKKSA (7(1)). ISSN 0128-0740

Ismail, Issham and Junin, Radzuan (2000) Kajian aliran pelbagai fasa dalam industri huluan petroleum. Seminar Kebangsaan Teknologi Makmal ke-4 . pp. 157-163.

Ismail, Issham and Teow, Keat Seang (2000) Kerosakan formasi: punca utama kepada pengurangan pengeluaran minyak. Prosiding Seminar Advances in Malaysian Energy Research .

Istadi, Istadi and Saidina Amin, Nor Aishah (2003) Catalyst screening for CO2 oxidative coupling of methane to C2 hydrocarbons. Proceedings of International Conference On Chemical and Bioprocess Engineering, 2 . pp. 1069-1076.

Ithnin, Ahmad Muhsin (2015) Real-time water-in-diesel emulsion fuel production system for diesel electric generator. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Iwamoto, K. and Shiraiwa, Y. (2016) Accumulation of cesium by aquatic plants and algae. In: Impact of Cesium on Plants and the Environment. Springer International Publishing, pp. 171-185. ISBN 978-331941524-6

Iwamoto, Koji and Saleh, Edziani Nabila and Hanawa, Yutaka and Suhaimi, Noraiza and Kaha, Marshila and Yahya, Nurul Ashyikin and Hara, Hirofumi and Sugiura, Norio and Goto, Masafumi and Mohamad, Shaza Eva and Mad Nordin, Mariam Firdaus and Shameli, Kamyar and Shiraiwa, Yoshihiro (2015) Biomass production and nutrient removal by spontaneous grown green algae oedogonium sp. from a pond in University of Tsukuba. In: International Conference on Sustainability Initiatives (ICSI 2015)in conjunction with 8th ASEAN Environmental Engineering Conference (AEEC), 24-25 August, 2015, Kuala Lumpur, Malaysia.

Iwasaki, T. and Moriyama, M. and Ahmad, N. and Komatsu, K. and Watanabe, K. and Taniguchi, T. and Wakayama, Y. and Hashim, A. M. and Morita, Y. and Nakaharai, S. (2021) Localization to delocalization probed by magnetotransport of hbn/graphene/hbn stacks in the ultra-clean regime. Scientific Reports, 11 (1). ISSN 2045-2322

Izadiyan, Z. and Basri, M. and Fard Masoumi, H. R. and Abedi Karjiban, R. and Salim, N. and Shameli, K. (2017) Modeling and optimization of nanoemulsion containing Sorafenib for cancer treatment by response surface methodology. Chemistry Central Journal, 11 (1). ISSN 1752-153X

Izadiyan, Z. and Shameli, K. and Teow, S. Y. and Yusefi, M. and Kia, P. and Rasouli, E. and Tareq, M. A. (2021) Anticancer activity of 5-fluorouracil-loaded nanoemulsions containing fe3o4/au core-shell nanoparticles. Journal of Molecular Structure, 1245 . ISSN 0022-2860

Izaiddin, M. A. S. and Mustaffa, A. F. and Padzillah, M. H. (2017) Investigation of torque generation capability of mixed flow turbine under steady state conditions. Jurnal Teknologi, 79 (7-3). pp. 105-112. ISSN 0127-9696

Izamshah, R. and Muhammad Akmal, Muhammad Akmal and Ibrahim, Mansor and Kasim, M. and Ding, Songlin and Nawi, M. and Noorazizi, M. (2020) Development of ultrasonic pulsation wire electrical discharge turning device for micro/nano medical part manufacturing. International Journal of Nanoelectronics and Materials, 13 (ISSTE). pp. 363-378. ISSN 1985-5761

Izwan Ismail, Ahmad Shamsul and Ismail, Issham and Zoveidavianpoor, Mansoor and Mohsin, Rahmat and Piroozian, Ali and Misnan, Mohd. Shahir and Sariman, Mior Zaiga (2015) Experimental investigation of oil-water two-phase flow in horizontal pipes: pressure losses, liquid holdup and flow patterns. Journal of Petroleum Science and Engineering, 127 . pp. 409-420. ISSN 0920-4105

J

Jamalus, M. S. K. and Yusoff, N. M. and Sulaiman, A. H. (2019) Simulation of dual stage thulium-doped fiber amplifier using pump power distribution technique. Indonesian Journal of Electrical Engineering and Computer Science, 15 (3). pp. 1203-1211. ISSN 2502-4752

Jasni, Nur Afiqah Husna and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan and Abdullah, Mundzir and Wan Nawawi, Wan Mohd. Fazli and Yahaya, Hafizal (2020) Graphene-based saturable absorber for passive Q-switching erbium doped fiber laser. In: 14th IEEE International Conference on Semiconductor Electronics, ICSE 2020, 28 - 29 July 2020, Kuala Lumpur, Malaysia.

Jasmi, Kamarul Azmi (2018) Membina Reputasi Pensyarah Pendidikan Islam Melalui Laman Web Researchgate. In: Bengkel Membina Reputasi Pensyarah Melalui ResearchGate, 16hb Ogos 2017, Makmal Komputer.

J., NorRuwaida and M., Dewika and S., Shahidana and M., Rashid and Md. Ali, Abd. Halim and M. P., Khairunnisa and Ammar, M. R. and Zahiruddin, S. and Y. Y., Sara (2020) Effect of additives on the ash element from combustion of palm fiber and shell. In: 2nd International Conference on Green Environmental Engineering and Technology 2020, IConGEET 2020, 23 - 24 July 2020, Seoul, Virtual.

Jaafar, Noraini (1992) Sustainable development in perspective, definition, concepts and policy issues. In: Conference On Development On Malaysian Natural Resources, 29-30 September, 1992, Bilik Jumaah, Universiti Teknologi Malaysia, Kuala Lumpur. (Unpublished)

Jaafar, G. A. and Abdullah, S. M. and Adli, S. (2019) Enhanced detection algorithms to detect http ddos. International Journal of Advanced Trends in Computer Science and Engineering, 8 (4). ISSN 2278-3091

Jaafar, G. A. and Abdullah, S. M. and Adli, S. (2019) A review of technique to self-generate DDoS dataset. International Journal of Advanced Trends in Computer Science and Engineering, 8 (4). pp. 1630-1638. ISSN 2278-3091

Jaafar, Ghafar A. and Abdullah, Shahidan M. and Ismail, Saifuladli (2019) Review of recent detection methods for HTTP DDoS attack. Journal of Computer Networks and Communications, 2019 . pp. 1-11. ISSN 2090-7141

Jaafar, Mohd. Zaidi and Vinogradov, J. and Jackson, M. D. (2010) Measurement of streaming potential coupling coefficient in sandstones saturated with natural and artificial brines at high selenity. Journal of Geophysical Research, 115 (812204). 1 - 18. ISSN 0148-0227

Jaafar, N. F. and Ahmad, Z. H. and Jusoh, N. W. C. and Nagao, Y. (2019) X-ray diffraction and spectroscopic studies of microwave synthesized mesoporous titania nanoparticles for photodegradation of 2-chlorophenol under visible light. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Jaafar, N. F. and Marfur, N. A. and Jusoh, N. W. C. and Nagao, Y. and Kamarudin, N. H. N. and Jusoh, R. and Iqbal, M. A. M. (2019) Synthesis of mesoporous nanoparticles via microwave-assisted method for photocatalytic degradation of phenol derivatives. Malaysian Journal of Analytical Sciences, 23 (3). pp. 462-471. ISSN 1394-2506

Jaafar, N. F. and Najman, A. M. M. and Marfur, A. and Jusoh, N. W. C. (2020) Strategies for the formation of oxygen vacancies in zinc oxide nanoparticles used for photocatalytic degradation of phenol under visible light irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 388 . ISSN 1010-6030

Jaffar, Khairi (2007) Practical Completion for Water Supply Projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jafri, Hasnora and Ali, Mohamad Wijayanuddin and Ahmad, Arshad and Kamsah, Mohd. Zaki (2005) Effective occupational health and safety performance measurements. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Jaganathan, Saravana Kumar and Balaji, Arunpandian and Vellayappan, Muthu Vignesh Ignesh and Subramanian, Aruna Priyadarshni and John, Agnes Aruna Runa and Asokan, Manjeesh Kumar Umar and Supriyanto, Eko (2015) Review: radiation-induced surface modification of polymers for biomaterial application. Journal of Materials Science, 50 (5). pp. 2007-2018. ISSN 0022-2461

Jahangirian, Hossein and Kalantari, Katayoon and Izadiyan, Zahra and Rafiee-Moghaddam, Roshanak and Shameli, Kamyar and Webster, Thomas J. (2019) A review of small molecules and drug delivery applications using gold and iron nanoparticles. International Journal of Nanomedicine, 14 . pp. 1633-1657. ISSN 1176-9114

Jainal, Siti Fatimah and Mohamed, Norliza and Hamzah, Azura (2019) Design of WLAN and WIMAX band rejection utilizing UWB planar antenna comprising a slit in the conductor planes. IIUM Engineering Journal, 20 (2). pp. 90-104. ISSN 1511-788X

Jalaliyoon, Neda and Abu Bakar, Nooh and Mohammadi, Hamed Taherdoost (2015) How to enhance performance of universities by implementing balanced scorecard with using FDM and ANP. International Science Index, Educational And Pedagogical Sciences, 5 (2). pp. 1-4. ISSN 1307-6892

Jalaliyoon, Neda and Abu Bakar, Nooh and Mohd. Mahdzir, Akbariah (2020) Enhanced balanced scorecard framework for performance evaluation of universities. International Journal of Society Systems Science, 12 (4). pp. 286-305. ISSN 1756-252X

Jalil, Suhana and Mohd. Yusof, Mohd. Rashid and A. S., Afidah (2015) Evaluation of external radiological hazard in bottom and fly ash from coal fired pilot plant. In: International Conference on Sustainability Initiatives, 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Jamaluddin, M. A. S. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramlee, F. and Munir, A. B. and Bani, N. A. and Muhtazaruddin, M. N. and Mas’ud, A. A. and Ardila Rey, J. A. and Ayub, A. S. and Sellami, N. (2019) Potential of floating solar technology in Malaysia. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1638-1644. ISSN 2088-8694

Jamaludin, Juliza and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Rahiman, Hafiz Fazalul and Mohd. Muji, Siti Zarina and Mohd. Fadzil, Naizatul Shima and Leow, Pei Ling and Jumaah, Fahjumi and Ahmad, Anita and Nor Ayob, Nor Muzakkir and Ling, En Hong (2015) Introducing an application of a charged coupled device (CCD) in an optical tomography system. Jurnal Teknologi, 73 (3). pp. 97-102. ISSN 2180-3722

Jamaludin, K. R. and Talib, H. H. A. and Shah, S. A. R. (2019) Integrated quality environmental management practices and its impact on operational and environmental performances in food processing SMEs. In: 9th International Conference on Industrial Engineering and Operations Management, IEOM 2019, 5-7 March 2019, JW Marriott Hotel Bangkok, Thailand.

Jamaludin, Madina and Mohammad, Nurul Farahain and Shafie, Sharidan and Ali, Anati (2012) Unsteady mixed convection flow over a cylinder of elliptic cross section near forward stagnation point. Matematika, 28 (2). pp. 109-125. ISSN 0127-8274

Jamaludin, Rosmahaida and Maarop, Nurazean and Siti Fatimah, Siti Fatimah and Mustafa, Zaharah and Maarof, Hasmerya and Usman, Bishir (2019) Density functional theory calculations of structure-antioxidant activity of selected phenolic acids and flavonoids found in Malaysian honey. Jurnal Kejuruteraan SI, 2 (1). pp. 77-83. ISSN 0012-80198

Jamaludin, Khairur Rijal and Adenan, Mohd. Shahriman and Md. Daud, Mohd. Yusof and Abd. Raman, Norazmein (2012) Delaminating control on drilling the medium density fiber board with robust optimization. Jurnal Teknologi, 59 . pp. 95-98. ISSN 0127–9696 (Print) ; 2180-3722 (Electronic)

Jambak, Muhammad Ikhwan and Haron, Habibollah and Nasien, Dewi (2008) Development of robot simulation software for five joints mitsubishi RV-2AJ robot using MATLAB/Simulink and V-Realm Builder. In: Fifth International Conference on Computer Graphics, Imaging and Visualization, 26-28 Aug. 2008.

Jamian, Nor Ruwaida (2017) The influence of moisture and ash content of palm fibre and shell towards particulate emission in palm oil mills. PhD thesis, Universiti Teknologi Malaysia.

Jamil, A. H. A. and Fathi, M. S. (2016) The integration of lean construction and sustainable construction: a stakeholder perspective in analyzing sustainable lean construction strategies in Malaysia. In: Conference on ENTERprise Information Systems / International Conference on Project MANagement / Conference on Health and Social Care Information Systems and Technologies, CENTERIS / ProjMAN / HCist 2016, 5-7 Oct 2016, Portugal.

Japar, W. M. A. A. and Sidik, N. A. C. and Asako, Y. (2019) Entropy generation minimization in sinusoidal cavities-ribs microchannel heat sink via secondary channel geometry. CFD Letters, 11 (7). pp. 1-10. ISSN 2180-1363

Japar, W. M. A. A. and Sidik, N. A. C. and Saidur, R. and Asako, Y. and Muhammad, N. M. (2020) Thermal performance analysis in sinusoidal-cavities-ribs microchannel heat sink with secondary channel geometry for low pumping power application. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Japar, Wan Mohd. Arif Aziz and Che Sidik, Nor Azwadi and Aid, Siti Rahmah and Asako, Yutaka and Tan, Lit Ken (2018) A comprehensive review on numerical and experimental study of nanofluid performance in microchannel heatsink (MCHS). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 165-176. ISSN 2289-7879

Jasimin, Tuti Haryati (2018) Mediation effect of social aspect in the relationship between environmental and economic aspects: Their influence on the value of green commercial office property. Planning Malaysia, 16 (1). pp. 251-264. ISSN 1675-6215

Jasmi, Kamarul Azmi (2016) Pendidikan sebagai medium penerapan Islam dalam sains dan teknologi. In: Persidangan Islam dalam Sains dan Teknologi 2016 (PIST’16), 13-15 Oktober 2016, Dewan Senat, Universiti Teknologi Malaysia, Skudai Johor. (Unpublished)

Jasmi, Kamarul Azmi (2016) Penghasilan buku penyelidikan daripada tesis Pengajian Islam dan Pendidikan Islam. In: Bengkel Penulisan dan Penerbitan Akademik, 29hb Ogos 2016, Bilik Mesyuarat, Fakulti Tamadun Islam, Kampus Kuala Lumpur City, Universiti Teknologi Malaysia.

Javadi, Ali and Abouzari-Lotf, Ebrahim and Mehdipour-Ataei, Shahram and Zakeri, Masoumeh and Nasef, Mohamed Mahmoud and Ahmad, Arshad and Ripin, Adnan (2015) High refractive index materials: a structural property comparison of sulfide- and sulfoxide-containing polyamides. Journal of Polymer Science, Part A: Polymer Chemistry, 53 (24). pp. 2867-2877. ISSN 0887-624X

Javadi, Ali and Najjar, Zahra and Bahadori, Saedeh and Vatanpour, Vahid and Malek, Ali and Abouzari-Lotf, Ebrahim and Shockravi, Abbas (2015) High refractive index and low-birefringence polyamides containing thiazole and naphthalene units. RSC Advances, 5 (111). pp. 91670-91682. ISSN 2046-2069

Jayaraman, Prebagaran (2009) Shipbuilding transfer of technology model from the recipient prospective. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Jazayeri, S. D. and Lim, H. X. and Shameli, K. and Yeap, S. K. and Poh, C. L. (2021) Nano and microparticles as potential oral vaccine carriers and adjuvants against infectious diseases. Frontiers in Pharmacology, 12 . ISSN 1663-9812

Jemale, Alia Sofie (2010) Mixed-mode silica monolith as an efficient separation medium for capillary electrochromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jensani, Muhammad Khairul Nizam and Eswaran, Kumanan and Mohd Noor, Sulaiman Shakib (2019) Media Sosial dan Pembentukan Budaya Menurut Islam. In: Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Jeremiah, P. and Samy, G. N. and Shanmugam, B. and Ponkoodalingam, K. and Perumal, S. (2019) Potential measures to enhance information security compliance in the healthcare internet of things. In: 3rd International Conference of Reliable Information and Communication Technology, IRICT 2018, 23-24 Jun 2018, Kuala Lumpur, Malaysia.

Jesbains, K. and Kuwano, Noriyuki and Jamaludin, Khairur Rijal and Miyake, Hideto and Hiramatsu, Kazumasa and Suzuki, Shuhei and Mitsuhara, Masatoshi and Hata, S. and Soejima, Youhei (2016) Reduction of dislocation density of aluminium nitride buffer layer grown on sapphire substrate. Journal of Mechanical Engineering and Sciences, 10 (1). pp. 1908-1916. ISSN 2289-4659

Jidin, Auzani (2011) Improved dynamic performance of direct torque control of induction machines. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jimbin, V. S. and Ahmad, N. A. (2017) Magnetic field measurement from 132/275 KV overhead power lines. Jurnal Teknologi, 79 (1). pp. 89-95. ISSN 0127-9696

Johar, Farhana (2003) Placement and routing in VLSI design problem using single row routing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Johari, Anwar and Hashim, H. and Rozainee, M. (2009) Geometrical design of stand pipe air distributors for the combustion of municipal solid waste in a fluidised bed. Jurnal Teknologi, 50 (F). pp. 79-88. ISSN 2180-3722

Johari, M. A. F. and Mazlan, S. A. and Nasef, M. M. and Ubaidillah, U. and Nordin, N. A. and Abdul Aziz, S. A. and Johari, N. and Nazmi, N. (2021) Microstructural behavior of magnetorheological elastomer undergoing durability evaluation by stress relaxation. Scientific Reports, 11 (1). ISSN 2045-2322

Johari, M. A. F. and Mazlan, S. A. and Nordin, N. A. and Ubaidillah, U. and Aziz, S. A. A. and Nazmi, N. and Johari, N. and Choi, S. B. (2021) The effect of microparticles on the storage modulus and durability behavior of magnetorheological elastomer. Micromachines, 12 (8). ISSN 2072-666X

Johari, M. A. F. and Sarman, A. M. and Mazlan, S. A. and Ubaidillah, U. and Nordin, N. A. and Abdul Aziz, S. A. and Johari, N. and Nazmi, N. and Yusuf, S. M. (2021) An insight into amorphous shear band in magnetorheological solid by atomic force microscope. Materials, 14 (16). ISSN 1996-1944

Johari, Muhammad Hazwan and Baharuddin, Amirul Syafiq and Ihwani, Siti Suhaila (2019) Media Sosial dan Kelestarian Penggunaan Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Johari, Nasrul Hadi (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jonet, Mohd Anuar and Md. Illias, Rosli (2007) Isolation of maltogenic amylase gene from bacillus licheniformis TH-1. In: The 32nd Annual Conference Of The Malaysian Society For Biochemistry And Molecular Biology, 5th-6th September 2007, Eastin Hotel, Petaling Jaya.

Joo Kok, Tan and Mohd. Ali, Nor Raihana and Abas, Norzaida (2020) Identification of deficiencies of electricity connection charges guidelines. Science International - Lahore, 32 (4). pp. 501-505. ISSN 1013-5316

Joshi, P. and Okada, T. and Miyabayashi, K. and Miyake, M. (2018) Evaluation of Alkylamine Modified Pt Nanoparticles as Oxygen Reduction Reaction Electrocatalyst for Fuel Cells via Electrochemical Impedance Spectroscopy. Analytical Chemistry, 90 (10). pp. 6116-6123. ISSN 0003-2700

Jumhur, A. A. and Mahmood, N. H. N. and Muchdie, M. (2017) Innovation strategy of small industry batik in competitive advantage. Advanced Science Letters, 23 (11). pp. 10871-10874. ISSN 1936-6612

Junaidi, N. A. and Suwa, T. (2016) Solar-powered adsorption refrigeration cycle optimization. Jurnal Teknologi, 78 (5-8). pp. 101-107. ISSN 0127-9696

Junin, Radzuan (1987) Bentonit: Minerologi, sifat-sifat dan kegunaannya. Buletin FKKKSA, 1 (1). p. 31. ISSN 0128-0740

Junin, Radzuan (1994) Disposal of oily cuttings by downhole fracturing injections: slurry product specifications issues. Buletin FKKKSA, 8(1) . pp. 1-6. ISSN 0128-0740

Junin, Radzuan and Abd. Karim, Khairuddin (1991) Kajian minerologi dan fiziko-kimia ke atas lempung bentonit tempatan (Lahad Datu) dan menilai kegunaannya sebagai lempung peluntur. In: Kertas Kerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima(1988-1990), 18 November 1991, UTM Kuala Lumpur.

Junin, Radzuan and Abdul Karim, Khairuddin (1992) Bentonit Lahad Datu, Sabah: mineralogi, sifat-sifat fiziko-kimia dan potensinya sebagai tanah peluntur. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . I-8.

Junin, Radzuan and Hall, S. T. and Waller, M. D. (1996) Transport properties of slurries in simulated fracture channels. Proceedings Swemp '96 . pp. 579-586.

Jusoh, Mohd. Zamri and Din, Nazli Che and Dimon, Mohamad Ngasri (2015) Comparison of normal incidence sound absorption coefficient of direct piercing carved wood panels with circular, geometry and floral motifs. In: 5th International Conference on Noise, Vibration and Comfort ( NVC 2015 ), 1-3 Dec, 2015, Melaka, Malaysia.

Jusoh, Samsiah and Zakaria, Zuriati and Ahmad, Fasihuddin and Din, Laily (2015) Isolation and characterization of styryllactone of goniothalamus ridleyi. Sains Malaysia, 44 (3). pp. 365-370. ISSN 1266-039

K

K., Omar and Jhonny, Jhonny (2009) Crustal deformation study in Peninsular Malaysia using global positioning system. In: Postgraduate Seminar Faculty of Geoinformation Science & Engineering, 2009, Institut Ibnu Sina UTM, Skudai.

K. H., Sharkawi and Ujang, Muhamad Uznir and Abdul Rahman, Alias (2008) 3D navigation system for virtual reality based on 3D game engine. In: International Society of Photogrammetry and Remote Sensing Congress 2008, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

K. J. MANLEY, K. J. MANLEY and J. MARCEAU, J. MARCEAU (2001) A REVIEW OF NEW BUSINESS EMERGENCE IN THE BUILDING AND CONSTRUCTION SECTOR AND RECENT AUSTRALIAN EXPERIENCE. Jurnal Teknologi B, 35 (B). pp. 13-22. ISSN 0127-9696

Ka Yik, Nin (2012) The assessment of reinforced concrete solid floor slabs subjected to combined actions of vertical and lateral load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kabirifar, Kamyar (2012) Time measurement for improvement for construction using deming theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kadir, N. A. A. and Saris, N. N. H. and Irawati, N. and Hamzah, A. (2020) Low-cost temperature sensing using d-shaped optical fiber. In: 8th IEEE International Conference on Photonics, ICP 2020, 16-18 May 2020, Kota Bharu, Kelantan.

Kadir, N. A. A. and Wahid, M. H. A. and Lokman, M. Q. and Irawati, N. and Hamzah, A. and Harun, S. W. (2020) Side-polished optical fiber structure for sodium nitrate sensor. IEEE Sensors Journal, 20 (11). pp. 5929-5934. ISSN 1530-437X

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2016) Investigation of electromagnetics radiation for stroke patients and non-stroke participants. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2017) Statistical analysis of electromagnetic radiation for stroke patients and non-stroke participants. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-4). pp. 55-59. ISSN 2180-1843

Kadir, Z. A. and Mohammad, R. (2017) Risk assessment of human risk factors in port accidents. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 535-551. ISSN 0976-6340

Kadir, Z. A. and Mohammad, R. and Othman, N. and Amrin, A. and Muhtazaruddin, M. N. and Abu Bakar, S. H. and Muham, F. (2020) Risk management framework for handling and storage of cargo at major ports in Malaysia towards port sustainability. Sustainability (Switzerland), 12 (2). ISSN 2071-1050

Kadir, Z. A. and Mohammad, R. and Othman, N. and Chelliapan, S. and Amrin, A. (2017) Review on risk, risk assessment techniques, guidelines and framework in port safety. International Journal of Mechanical Engineering and Technology (IJMET), 8 (11). pp. 812-838. ISSN 0976-6340

Kaha, Marshila and Iwamoto, Koji and Nurul Ashyikin, Yahya and Suhaimi, Noraiza and Sugiura, Norio and Hara, Hirofumi and Othman, Nor’Azizi and Zakaria, Zuriati and Suzuki, Kengo (2021) Enhancement of astaxanthin accumulation using black light in Coelastrum and Monoraphidium isolated from Malaysia. Scientific Reports, 11 (1). p. 11708. ISSN 2045-2322

Kahalian, Mohammad Saber (2012) The influence of project management methodology utilization (PPMU) on project success in IT-entrepreneur project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kaidi, H. M. and Ahmad, N. and Hashim, N. F. M. and Salim, F. and Muhtazaruddin, M. N. and Mohamed, N. and Musa, R. and Aris, S. A. M. and Jalil, S. Z. A. (2019) Engaging youths in skill development through network system wiring workshop in rural area. Indonesian Journal of Electrical Engineering and Computer Science, 16 (2). pp. 950-955. ISSN 2502-4752

Kalantari, K. and Afiffi, A. M. and Salleh, A. and Mohamad, E. N. and Izadiyan, Z. (2017) Evaluation of heavy metals removal by cross-linked (polyvinyl alcohol/ chitosan/magnetic) nano fibrous membrane prepared by electro spinning technique. Desalination and Water Treatment, 98 . pp. 266-275. ISSN 1944-3994

Kalantari, Katayoon and Afifi, Amalina Muhammad and Bayat, Saadi and Shameli, Kamyar and Yousefi, Samira and Mokhtar, Norrashidah and Kalantari, Alireza (2016) Heterogeneous catalysis in 4-nitrophenol degradation and antioxidant activities of silver nanoparticles embedded in tapioca starch. Arabian Journal of Chemistry . ISSN 1878-5352 (In Press)

Kalantari, Katayoon and Afiffi, Amalina M. and Salleh, Ariesman and Mohamad, Edzrol Niza and Izadiyan, Zahra (2017) Evaluation of heavy metals removal by cross-linked (polyvinyl alcohol/chitosan/magnetic) nano fibrous membrane prepared by electro spinning technique. Desalination and Water Treatment, 98 . pp. 266-275. ISSN 1944-3994

Kalash, Haydar Sabeeh (2010) Development of universal software radio peripheral amplifier for underwater acoustic platform using software defined radio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamaludin, K. N. and Abdullah, L. and Maslan, M. N. and Zamri, R. and Mat Ali, M. and Syed Mohamed, M. S. and Noorazizi, M. S. (2020) Utilization of analytical hierarchy process (AHP) for selecting the best design concept of conveyor system. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2019, 8 July 2019 through 8 July 2019, Melaka, Malaysia.

Kamaludin, R. and Othman, M. H. D. and Kadir, S. H. S. A. and Rahman, M. A. and Jaafar, J. (2017) The morphological properties study of photocatalytic TiO2/PVDF dual layer hollow fiber membrane for endocrine disrupting compounds degradation. Malaysian Journal of Analytical Sciences, 21 (2). pp. 426-434. ISSN 1394-2506

Kamalzaman, Siti Nor Asikin and Sulaiman, Shahida and Syed-Mohamad, Sharifah Mashita (2011) User-centered technique for managing and racking modification requests in prototype-based web applications. In: 2011 5th Malaysian Software Engineering Conference (MYSEC).

Kamardin, Kamilia and A. Rahim, Mohamad Kamal and Hall, Peter S. and Samsuri, Noor Asmawati and Abdul Latef, Tarik and Ullah, Mohammad Habib (2015) Planar textile antennas with artificial magnetic conductor for body centric communications. In: 6th International Conference on Metamaterials, Photonic Crystals and Plasmonics (META15), 4-7 August, 2015, USA.

Kamardin, Kamilia and Abdul Rahim, Mohamad Kamal and Samsuri, Noor Asmawati and Jalil, Mohd Ezwan and Ahmad, Noor Azurati (2015) Planar textile antennas performance under wearable and body centric measurements. In: International Conference on Applied Electromagnetics (APPEIC), 3-5 Dis, 2015, Thailand.

Kamardin, Kamilia and Azizan, Azizul and Olatoye, Taiwo Mustapha and Maidin, Siti Nurhafizza and Alnahari, Abdulqudos and Abd. Aziz, Nur Syazarin Natasha and Panatik, Kamarul Zaman (2018) The important role of system engineering for yacht engineering. Open International Journal of Informatics (OIJI), 6 (3). pp. 53-66. ISSN 2289-2370

Kamardin, Kamilia and Mad Kaidi, Hazilah and Mohd. Sam, Suriani and Rajandran, Deepa and Maidi, Siti Nurhafizza (2018) Development of remote monitoring system for hypertension/hypotension patients using AES algorithm. Open International Journal of Informatics (OIJI), 6 (3). pp. 43-52. ISSN 2289-2370

Kamaruddin, Kamarulzaman and Md. Illias, Rosli and Abdul Aziz, Suriani and Said, Mamot and Hassan, Osman (2005) Effects of buffer properties on cyclodextrin glucanotransferase reactions and cyclodextrin production from raw sago (cycas revoluta) starch. Biotechnology and Applied Biochemistry, 41 . pp. 117-125. ISSN 0885-4513

Kamaruddin, Samira Albati and Che Hasan, Rozaimi and Abd. Karim, Nurul Izzati (2018) Comparison of petrophysical relationship for soil water content estimation at peat soil using gpr common-offset measurements. In: 5th International Congress on Technology - Engineering & Science (ICONTES2018).

Kamaruddin, Samira Albati and Mat Noor, Mohd. Nazrul (2018) Risk assessment of excavation works in the vicinity of underground utilities at construction site. In: Proceedings of the 2nd Master Project Symposium.

Kamaruddin, Samira Albati and Mustafa, M. Bob and Wan Ishak, Wan Mohd Faizal and Ngien, Su Kong and Motasem, Alazaiza Y. D. (2017) Assessment of the behaviour of soil structure in double-porosity kaolin media using light transmission visualization (LTV) method. International Journal of Geotechnical Engineering, 11 (3). pp. 316-320. ISSN 1938-6362

Kamaruddin, Khairul Hisyam (2005) Rural sustainability: an examination of the practice of sustainable development principle among indigenous communities in interior rural Malaysia. Project Report. UTM. (Unpublished)

Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2005) Gas adsoprtion phenomenon in microporous zeolite adsorbent. In: MSA Golden Jubilee International Science Congress (ISC) 2005, August 3-6, 2005, Putra World Trade Centre, Kuala Lumpur.

Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2005) Gas adsorption on modified zeolite adsorbent. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Kamarudin, Khairul Hisyam and Abd. Wahid, Siti Nurhuda (2015) Using ICTs for rural development: an overview. In: Asean Forum on ICT for Sustainable Rural Development and Knowledge Cross-Fertilization 2015 (ASEAN-ICT4SRD2015), 25-27 May, 2015, Kuala Lumpur, Malaysia.

Kamarudin, Khairul Hisyam and Ngah, Ibrahim and Abd. Wahid, Siti Nurhuda and Razak, Khamarrul Azahari (2015) Readiness of Orang Asli communities in Royal Belum-Temengor forest complex, Perak towards sustainable Eco-culture tourism (ECT) programme. Journal Of Human Capital Development, 8 (1). pp. 59-72. ISSN 1985-7012

Kamarudin, M. S. and Zulkeflee, M. and Padzillah, M. H. (2017) Effect of tip clearance on the flow field of the mixed flow turbocharger turbine. Jurnal Teknologi, 79 (7-3). pp. 97-103. ISSN 0127-9696

Kamarudin, Md. Nor and Mat Amin, Zulkarnaini and Latef, Mohd. Zulkafle and Mohamad, Azrinda Hassan (2006) The integration of Global Positioning Systems (GPS) and surveying packages for near real-time flood monitoring system. Project Report. Faculty of Geoinformation Science and Engineering (FKSG), Skudai, Johor. (Unpublished)

Kamarudin, Md. Nor and Wan Mohd. Akib , Wan Abdul Aziz and Che Awang, Mohamad Saupi and Mohd. Zaki , Mohd. Zahlan and Subari, Mustafa Din (2006) The Integration of Global Positioning System (GPS) and meteorological observations for tropospheric model development in Malaysian region. Project Report. UTM. (Unpublished)

Kamarudin, Mohd. Hider and Ismail, Zool Hilmi and Saidi, Noor Baity (2021) Deep learning sensor fusion in plant water stress assessment: A comprehensive review. Applied Sciences (Switzerland), 11 (4). pp. 1-20. ISSN 2076-3417

Kamarudin, Muhamad Aiman and Mustafa Kamal, Muhamad Syakir and Safar, Ajmain @ Jimaain (2019) Media Sosial dan Dakwah Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Kamarzaman, Nazima and Mad Kaidi, Hazilah and Mohd. Noor, Norliza and Muhtazaruddin, Mohd. Nabil (2020) Analysis of network inventory issue in telco company. Journal of Advanced Research in Business and Management Studies, 18 (1). pp. 42-46. ISSN 2462-1935

Kamis, S. L. and Yee, T. M. and Akasaka, H. and Ohtake, N. (2020) Wear behavior of non-hydrogenated and hydrogenated dlc films under protein lubricated condition. Jurnal Tribologi, 25 . pp. 136-145. ISSN 2289-7232

Kamis, Azmi (1992) Cost of corrosion. Buletin FKKKSA, 6 (2). pp. 12-15. ISSN 0128-0740

Kamsah, Mohd Zaki (1993) Simulation and multimedia in chemical engineering. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-3.

Kamsah, Mohd Zaki (1990) Types of biochemical reactors. Buletin FKKKSA, 4 (1). pp. 29-35. ISSN 0128-0740

Kamsah, Mohd Zaki (1992) Computer aided process engineering (CAPE). Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . II-3.

Kamsani, Noratiqah and Kamsani, Noratiqah and Md. Salleh, Madihah and Basri, Siti Aisyah and Mohamad, Shaza Eva and Abd. Aziz, Suraini and Kamaruddin, Kamarulzaman (2018) Effects of Surfactant on the Enzymatic Degradation of Oil Palm Empty Fruit Bunch (OPEFB). Waste and Biomass Valorization, 9 (5). pp. 845-852. ISSN 1872641

Kamyab, H. and Lee, C. T. and Chelliapan, S. and Khademi, T. and Talaiekhozani, A. and Rezania, S. (2019) Role of microalgal biotechnology in environmental sustainability-a mini review. Chemical Engineering Transactions, 73 . pp. 451-456. ISSN 2283-9216

Kamyar, Mehranzamir (2012) MPP control with z-source inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kaneda, T. and Hamada, N. and Mitsukura, Y. (2016) Automatic alignment method for projection mapping on planes with depth. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Kaneda, Tomohiro and Hamada, Nozomu and Mitsukura, Yasue (2015) Automatic alignment system in simple planes for projection mapping. In: 2016 IEEE 12th International Colloquium on Signal Processing & its Applications (CSPA2016), 4 - 6 March 2016, Melaka, Malaysia.

Kaneshiro, S. and Mitsukura, Y. and Hamada, N. (2016) Respiratory sound analysis for continuous positive airway pressure machines. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Kang, D. and Hong, C. and Rehman, D. and Morini, G. L. and Asako, Y. and Faghri, M. (2020) Average friction factors of choked gas flow in microtubes. In: 37th UIT Heat Transfer Conference and Symposium Refrigerants: Heat Transfer and Applications, 24 - 26 June 2019, Padova, Italy.

Kang, Xiang Khor and Phei, Ming Chern and Che, Fai Yeong and Lee, Eileen Ming Su and Mustar, Muhammad Farhan and Abdullah, Najib and Kang, Xian Khor and Mohd. Latip, Hadafi Fitri (2018) Smart balance board to improve balance and reduce fall risk: pilot study. In: 2nd International Conference for Innovation in Biomedical Engineering and Life Sciences, ICIBEL 2017, 10 December 2017 through 13 December 2017, Penang, Malaysia.

Kanniah, S. L. and Mahrin, M. N. (2017) Influential factors affecting secure software development implementation at public service organization: an exploratory study. Advanced Science Letters, 23 (9). pp. 9157-9162. ISSN 1936-6612

Kapi, Azyan Yusra and Ibrahim, Subariah (2011) Fixed size encoding scheme for software watermarking. In: 7th International Conference On Information Assurance And Secuirity.

Karamizadeh, S. and Abdullah, S. M. and Shayan, J. and Mazdak, Z. and Nooralishahi, P. (2017) Taxonomy of filtering based illumination normalization for face recognition. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 135-139. ISSN 2180-1843

Karamizadeh, S. and Abdullah, S. M. and Shayan, J. and Nooralishahi, P. and Bagherian, B. (2017) Threshold based skin color classification. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-3). pp. 131-134. ISSN 2180-1843

Karim, M. E. and Munir, A. B. and Karim, M. A. and Muhammad-Sukki, F. and Abu-Bakar, S. H. and Sellami, N. and Bani, N. A. and Hassan, M. Z. (2018) Energy revolution for our common future: An evaluation of the emerging international renewable energy law. Energies, 11 (7). ISSN 1996-1073

Karim, Md. Ershadul and Munir, Abu Bakar and Reza, Ahmed Wasif and Muhammad-Sukki, Firdaus and Mohd. Yasin, Siti Hajar and Abu-Bakar, Siti Hawa and Rahim, Ruzairi Abdul (2015) Too enthusiastic to care for safety: Present status and recent developments of nanosafety in ASEAN countries. Technological Forecasting and Social Change, 92 . pp. 168-181. ISSN 0040-1625

Karim, Mohammad Ershadul and Karim, Ridoan and Islam, Md. Toriqul and Muhammad Sukki, Firdaus and Bani, Nurul Aini and Muhtazaruddin, Mohd. Nabil (2019) Renewable energy for sustainable growth and development: An evaluation of law and policy of Bangladesh. Sustainability (Switzerland), 11 (20). p. 5774. ISSN 2071-1050

Karim, N. A. and Ludin, N. A. and Mat-Teridi, M. A. and Sepeai, S. and Ibrahim, M. A. and Kouhnavard, M. and Sopian, K. and Arakawa, H. (2018) Effects of deposition time on of cobalt sulfide thin film electrode formation. Malaysian Journal of Analytical Sciences, 22 (1). pp. 80-86. ISSN 1394-2506

Karim, R. and Karim, M. E. and Muhammad Sukki, F. and Abu-Bakar, S. H. and Bani, N. A. and Munir, A. B. and Kabir, A. I. and Ardilam Rey, J. A. and Mas'Ud, A. A. (2018) Nuclear energy development in Bangladesh: A study of opportunities and challenges. Energies, 11 (7). ISSN 1996-1073

Karim, R. and Muhammad-Sukki, F. and Karim, M. E. and Munir, A. B. and Mohammad Sifat, I. and Abu-Bakar, S. H. and Bani, N. A. and Muhtazaruddin, M. N. (2018) Legal and regulatory development of nuclear energy in Bangladesh. Energies, 11 (10). ISSN 1996-1073

Karim, Ridoan and Muhammad Sukki, Firdaus and Hemmati, Mina and Md. ShahNewaz, Md. ShahNewaz and Farooq, Haroon and Muhtazaruddin, Mohd. Nabil and Muhammad Zulkipli, Muhammad Zulkipli and Ardila Rey, Jorge Alfredo (2020) Paving towards strategic investment decision: A SWOT analysis of renewable energy in Bangladesh. Sustainability (Switzerland), 12 (24). pp. 1-30. ISSN 2071-1050

Karimi, H. and Rahmani, R. and Ahmadi, M. T. and Ismail, R. (2016) Modelling effective charge density in graphene-gased DNA sensor. Science of Advanced Materials, 8 (6). pp. 1187-1194. ISSN 1947-2935

Karimi, Hediyeh and Rahmani, Rasoul and Othman, Mohd Fauzi and Zohoori, Bahareh and Mahrami, Mohsen and Kamyab, Hesam and Hosseini, Seyed Ebrahim (2016) An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks. Plasmonics, 11 (1). pp. 95-102.

Karimiyazdi, Rahman and Mokhber, Mozhdeh (2015) Improving viral marketing campaign via mobile instant messaging (MIM) applications. In: The 1st World Virtual Conference on Social and Behavioral Sciences, 28-30 Jun, 2015, Johor Bahru, Malaysia.

Kashani, Jamal and Arabshahi, Zohreh and Abdul Kadir, Mohamed Rafiq and Azari, Abbas (2012) Manufacturing of flexible surgical guide for fully edentulous patients. In: 2012 2nd International Conference on Key Engineering Materials (ICKEM 2012), 26-28 Feb 2012, Singapore.

Kashiwagi, R. and Hong, C. and Asako, Y. and Morini, G. L. and Faghri, M. (2020) Identification of gas flow regimes in adiabatic microtubes by means of wall temperature measurements. In: 7th UIT Heat Transfer Conference and Symposium Refrigerants: Heat Transferand Applications, 24 - 26 June 2019, Padova, Italy.

Kathiravale, Sivapalan and Ripin, Adnan (1997) Palm oil mill effluent treatment towards zero discharge. In: National Science And Technology Conference, July 15-16, 1997, Kuala Lumpur. (Unpublished)

Kathiravale, Sivapalan and Ripin, Adnan (1997) Treatment of palm oil mill effluent using evaporation and adsorption techniques. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Kaur, J. and Kuwano, N. and Jamaludin, K. R. and Mitsuhara, M. and Saito, H. and Hata, S. and Suzuki, S. and Miyake, H. and Hiramatsu, K. and Fukuyama, H. (2016) Electron microscopy analysis of microstructure of postannealed aluminum nitride template. Applied Physics Express, 9 (6). ISSN 1882-0778

Kaur, Jesbains (2017) The effects of annealing on microstructural changes for aluminium nitride epitaxial grown on sapphire by transmission electron microscopy. PhD thesis, Universiti Teknologi Malaysia.

Kaur, Manpreet and Mubarak, N. M. and Chin, Bridgid Lai Fui and Mohammad Khalid, Mohammad Khalid and Karri, Rama Rao and Walvekar, Rashmi and Abdullah, E. C. and Tanjung, Faisal Amri (2020) Extraction of reinforced epoxy nanocomposite using agricultural waste biomass. In: 2nd International Conference on Materials Technology and Energy, 6 - 8 November 2019, Sarawak, Malaysia.

Kavalela, Ester Ndaxuwelao Ndaimbwehafo and Chelliapan, Shreeshivadasan and Kamyab, Hesam (2019) Evaluation of awareness and safety among students and technicians in UTM research chemical laboratories. Journal of Advanced Research in Occupational Safety and Health, 5 (1). pp. 1-8. ISSN 2637-0255

Kavianpour, Sanaz and Shanmugam, Bharanidharan and Azam, Sami and Zamani, Mazdak and Samy, Ganthan Narayana and De Boer, Friso (2019) A systematic literature review of authentication in internet of things for heterogeneous devices. Journal of Computer Networks and Communications, 2019 . p. 5747136. ISSN 2090-7141

Kayed , Ahmad and Colomb, Robert M. (2005) Using BWW model to evaluate building ontologies in CGs formalism. Information Systems, 30 . pp. 379-398. ISSN 03064379

Kazilan, Kuzaida (2007) Implementation of collateral warranties in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kei, Saito and Michihiko, Shinozaki (2000) A study on communication tool for urban disaster prevention using multimedia. In: 8th International Conference on Computing in Civil and Building Engineering, 14 - 16 August 2000, Stanford, CA; United States.

Ken, T. L. and Ahmad, T. B. and Mohd., M. S. B. and Ngien, S. K. and Suwa, T. and Meng, O. S. (2016) Topological properties of flat electroencephalography's state space. In: 1st Progress in Applied Mathematics in Science and Engineering, PIAMSE 2015, 29 Sept - 1 Oct 2015, Bali, Indonesia.

KEVIN NEWHOUSE, KEVIN NEWHOUSE (2001) A PERFORMANCE-BASED BUILDING CODE IN USE. Jurnal Teknologi B, 35 (B). pp. 1-12. ISSN 0127-9696

Khadijah, S. M. P. and S. Liza, S. Liza and Shahemi, N. and Merican, A. M. and Abbas, A. A. and Ayob, K. A. (2020) Surface analysis of retrieved bilateral UHMWPE tibial inserts under varus malalignment condition. Engineering Failure Analysis, 118 . p. 104850. ISSN 1350-6307

Khair, Khalid and Mohamed, Zainai and Mohammad, Roslina and Farouk, Hazir and Ahmed, Mohammed E. (2018) A management framework to reduce delays in road construction projects in Sudan. Arabian Journal for Science and Engineering, 43 (4). pp. 1925-1940. ISSN 2193-567X

Khairi, M. H. A. and Abdul Aziz, S. A. and Hapipi, N. M. and Mazlan, S. A. and Nordin, N. A. and Ubaidillah, Ubaidillah and Ismail, N. I. N. (2020) Enhancement of isotropic magnetorheological elastomer properties by silicone oil. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16-17 Oct 2019, Jakarta, Indonesia.

Khairi, M. H. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Ahmad, K. Z. K. and Aziz, S. A. A. and Yunus, N. A. (2016) Effect of sucrose acetate isobutyrate ester on the epoxidised natural rubber based magnetorheological elastomers. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Khairuddin, Nozieana and Muhamad, Ida Idayu (2007) Antimicrobial effects on starch-based films incorporated with lysozymes. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Khairuddin, Nozieana and Mohd. Razi, Aishahtur Radhiah and Muhamad, Ida Idayu (2005) Antimicrobial (AM) effects of strach-based film incorporated with lysozymes and lauric acid. In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Khairuddin, Nozieana and Mohd. Razi, Aishahtur Radhiah and Muhamad, Ida Idayu (2005) Study of an antimicrobial starch-based active packaging system. In: KUSTEM 4th Annual Seminar On Sustainbility Science And Management 2005, 2-3 May 2005, Primula Beach Resort, Kuala Terengganu.

Khairuddin, Nozieana and Mohd. Razi, Aishahtur Radhiah and Muhamad, Ida Idayu (2005) Study of an antimicrobial starch-based active packaging system. In: 4th Food Science and Technology Seminar 2005, 23 July 2005, USM Penang.

Khairuddin, Nozieana and Muhamad, Ida Idayu (2005) Preliminary study of antimicrobial (AM) effects of starch-based film incorporated with nisin, lysozymes and lauric acid. In: Simposium Kimia Analisis Malaysia SKAM 18, 12-14 September 2005, Hotel Hyatt RegencyJohor Bahru, Johor.

Khairunnisa, M. P. and Faizal, F. and Miyazawa, E. and Masuda, K. and Tsukada, M. and Lenggoro, I. W. (2021) Detachment of submicron particles from substrates using the suspension-assisted ultrasonic method. Journal of Chemical Engineering of Japan, 54 (4). ISSN 0021-9592

Khalajabadi, S. Z. and Abu, A. B. H. and Ahmad, N. and Yajid, M. A. M. and Redzuan, N. B. and Nasiri, R. and Haider, W. and Noshadi, I. (2018) Bio-corrosion behavior and mechanical characteristics of magnesium-titania-hydroxyapatite nanocomposites coated by magnesium-oxide flakes and silicon for use as resorbable bone fixation material. Journal of the Mechanical Behavior of Biomedical Materials, 77 . pp. 360-374. ISSN 1751-6161

Khalajabadi, Shahrouz Zamani and Abu, Aminudin and Ahmad, Norhayati and Kadir, Mohammed Rafiq Abdul and Ismail, Ahmad Fauzi and Nasiri, Rozita and Haider, Waseem and Redzuan, Norizah (2017) Biodegradable Mg/HA/TiO2 Nanocomposites Coated with MgO and Si/MgO for Orthopedic Applications: A Study on the Corrosion, Surface Characterization, and Biocompatability. COATINGS, 7 (10).

Khalid, Abd. Ghani (2008) Cost forecasting model for building projects. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Khalid, A. S. and Hassan, N. S. and Abu Bakar Razak, N. A. and Baharuden, A. F. (2020) Business intelligence dashboard for driver performance in fleet management. In: 11th International Conference on E-Education, E-Business, E-Management, and E-Learning, IC4E 2020, 10-12 Jan 2020, Osaka, Japan.

Khalid, Che Mohd. Lukman and Fathi, Mohamad Syazli and Mohamed, Zainai (2015) The system architecture of cyber-physical systems integration for underground utility networks visualisation. In: The 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Khalid, M. S. and Songip, A. R. and Abu Bakar, N. and Chua, M. and Musri, M. (2017) An alternative approach of leakage detection in Underground Storage Tank. Journal of Engineering and Applied Sciences, 12 (9). pp. 2347-2351. ISSN 1816-949X (In Press)

Khalid, M. S. and Songip, A. R. and Abu Bakar, N. and Chua, M. and Musri, M. (2017) Understanding perception of fire risk from petrol station's workers. Journal of Engineering and Applied Sciences, 12 (9). pp. 2352-2360. ISSN 1816-949X

Khalid, Marzuki and R., Yusof and R., Abdul Rahman (2010) Fault detection and diagnosis for process control rig using artificial intelligent. ICIC Express Letters, 4 (5 B). 1811 -1812. ISSN 1881-803X

Khalid, Mohd. Shamsuri and Songip, Ahmad Rahman and Abu Bakar, Nooh and Musri, Mohtar (2015) An evolution of risk assessment tools in petrol station: a review. Asian Journal Of Applied Sciences, 3 (4). pp. 814-821. ISSN 2321-0893

Khalid, Waqas and Ahmad Zaki, Sheikh and Rijal, Hom Bahadur and Yakub, Fitri (2018) Thermal comfort requirements for different occupants in Malaysian hospital in-patient wards. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 43 (1). pp. 128-140. ISSN 2289-7879 (In Press)

Khalil, Mohammed S. and Muhammad, Dzulkifli and Khan, Muhammad Khurram and Alghathbar, Khaled (2010) Fingerprint verification based on statistical analysis. In: 2010 5th International Conference on Future Information Technology. Institute of Electrical and Electronics Engineers, New York, pp. 1-5. ISBN 978-142446950-5

Khamis, N. and Selamat, H. and Ismail, F. S. and Lutfy, O. F. (2019) Optimal exit configuration of factory layout for a safer emergency evacuation using crowd simulation model and multi-objective artificial bee colony optimization. International Journal of Integrated Engineering, 11 (4). pp. 183-191. ISSN 2229-838X

Khamis, N. and Selamat, H. and Ismail, F. S. and Lutfy, O. F. and Haniff, M. F. and Nordin, I. N. A. M. (2020) Optimized exit door locations for a safer emergency evacuation using crowd evacuation model and artificial bee colony optimization. Chaos, Solitons and Fractals, 131 . ISSN 0960-0779

Khan, Mohammad Ilyas and Hassan, Azman (2007) Wetting characteristics of photographic base solid polymeric substrates. In: VIIth National Symposium On Polymeric Materials 2007, November 27-28, 2007, Universiti Kuala Lumpur.

Khan, A. K. and Mubarak, N. M. and Abdullah, E. C. and Khalid, M. and Nizamuddin, S. and Baloch, H. A. and Siddiqui, M. T. H. (2019) Immobilization of lipase enzyme carbon nanotubes via adsorption. In: 11th Curtin University Technology, Science and Engineering International Conference, CUTSE 2018, 26-28 Nov 2018, Curtin University Malaysia Miri, Sarawak, Malaysia.

Khan, Faisal (2014) Economic exposure, pricing of risk and various volatility dynamics of stock returns on an emerging stock market. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Khan, Muhammad Jamshed and Kumari, Suriya and Shameli, Kamyar and Selamat, Jinap and Sazili, Awis Qurni (2019) Green synthesis and characterization of pullulan mediated silver nanoparticles through ultraviolet irradiation. Materials, 12 (15). p. 2382. ISSN 1996-1944

Khan, Muhammad Jamshed and Shameli, Kamyar and Sazili, Awis Qurni and Selamat, Jinap and Kumari, Suriya (2019) Rapid green synthesis and characterization of silver nanoparticles arbitrated by curcumin in an alkaline medium. Molecules, 24 (4). p. 719. ISSN 1420-3049

Khan, S. R. M. and Noozaei, J. and Kadir, M. R. A. and Waleed, A. M. T. and Jaafar, M. S. (2007) UPV method for strength detection of high performance concrete. Structural Survey, 25 (1). pp. 61-73. ISSN 0263-080X

Khan, Shawal and Khan, Shahzad and Zareei, Mahdi and Alanazi, Faisal and Kama, Nazri and Anjum, Adeel (2021) ABKS-PBM: Attribute-based keyword search with partial bilinear map. IEEE Access, 9 . pp. 46313-46324. ISSN 2169-3536

Khan, Sohrab and Ab. Rahim, Nor Zairah and Maarop, Nurazean (2019) A review on antecedents of citizen’s trust in government social media services. 3C Tecnologia (Si). pp. 109-120. ISSN 2254-4143

Khandanlou, R. and Fard Masoumi, H. R. and Ahmad, M. B. and Shameli, K. and Basri, M. and Kalantari, K. (2016) Enhancement of heavy metals sorption via nanocomposites of rice straw and Fe3O4 nanoparticles using artificial neural network (ANN). Ecological Engineering, 91 . pp. 249-256. ISSN 0925-8574

Khandanlou, Roshanak and Ahmad, Mansor and Masoumi, Hamid Reza Fard and Shameli, Kamyar and Basri, Mahiran and Kalantari, Katayoon (2015) Rapid adsorption of copper(ii) and lead(ii) by rice straw/fe3o4 nanocomposite: optimization, equilibrium isotherms, and adsorption kinetics study. Plos One, 10 (3). ISSN 1932-6203

Khandelwal, Manoj and Marto, Aminaton and Fatemi, Seyed Alireza and Ghoroqi, Mahyar and Armaghani, Danial Jahed and Singh, T. N. and Tabrizi, Omid (2018) Implementing an ANN model optimized by genetic algorithm for estimating cohesion of limestone samples. Engineering with Computers, 34 (2). pp. 307-317. ISSN 0177-0667

Khasri, Azduwin (2012) Slow pyrolysis of imperata cylindrica in a fixed bed reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Kheirkhah, Atabak and Mohd. Daud, Salwani and Ahmad @ Salleh, Noor Azurati and Mohd. Sam, Suriani and Abas, Hafiza and Shariff, Sya Azmeela and Md. Yusof, Yusnaidi (2016) Some intriguing high-throughput DNA sequence variants prediction over protein functionality. Jurnal Teknologi, 78 (42525). pp. 1-6. ISSN 0127-9696

Khiabani, H. and Idris, Norbik Bashah and Ab. Manan, J. L. (2012) Leveraging remote attestation to enhance the unified trust model for WSNs. In: Proceedings 2012 International Conference on Cyber Security, Cyber Warfare and Digital Forensic, CyberSec 2012. IEEE, New York, USA, pp. 139-143. ISBN 978-146731425-1

Khieng, C. and Triyono, M. B. and Minghat, A. D. (2019) How to survive selling scoreboard. International Journal of Recent Technology and Engineering, 8 (2). pp. 669-673. ISSN 2277-3878

Khoo, V. Ching and Dolah, Rozzeta and Haron, Habibah @ Norehan and Ramlie, Faizir and Hassan, Mohamad Z. (2020) Comprehensive multisite efficiency equation for semiconductor test equipment. Journal of Engineering Science and Technology, 15 (6). pp. 3971-3982. ISSN 1823-4690

Khor, K. X. and Chin, P. J. H. and Yeong, C. F. and Su, E. L. M. and Narayanan, A. L. T. and Abdul Rahman, H. and Khan, Q. I. (2017) Portable and reconfigurable wrist robot improves hand function for post-stroke subjects. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 25 (10). pp. 1864-1873. ISSN 1534-4320

Khoshnoodi, Mohammad (1995) Application of ASPEN PLUS in combustion modeling. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . C4-1.

Khudzari, Zahran and Richens, D. and Tansley, G. D. (2010) CIMS balloon pump : A Novel Left Ventricle Assist Device (LVAD). International Journal of Artificial Organs, 33 (7). 473 - 473.

Kim, Soyeon and Mori, Izumi and Abdul Rahim, Abd. Rahman (2018) Cultural values matter: Attractiveness of Japanese companies in Malaysia. International Journal of Cross Cultural Management, 18 (1). pp. 87-103. ISSN 1470-5958

Kirimtat, Ayca and Krejcar, Ondrej and Dolezal, Rafael and Selamat, Ali (2020) A mini review on parallel processing of brain magnetic resonance imaging. In: 8th International Work-Conference on Bioinformatics and Biomedical Engineering, IWBBIO 2020, 6 - 8 May 2020, Granada, Spain.

Kobayashi, Akira (2015) Application of advanced plasma technology to energy materials and environmental problems. NATIONAL PHYSICS CONFERENCE 2014 (PERFIK 2014), 1657 . ISSN 0094-243X

Kobayashi, Akira and Afrasiabi, Abbas (2015) A survey of microstructure and phase analysis from metal oxides at the bond coat/ysz interface after thermal shocks. Frontier Of Applied Plasma Technology, 8 (1). pp. 37-40. ISSN 1883-5589

Kobayashi, Akira and Yugeswaran, S. and Lusvarghi, L. and Mostaghimi, J. (2015) Preparation of glass ceramic by transferred arc plasma torch. Frontier Of Applied Plasma Technology, 8 (2). pp. 69-74. ISSN 1183-5589

Koesoemadinata, V. C. and Chou, K. and Baharin, N. S. K. and Yahya, W. J. and Yuzir, M. A. M. and Md. Akhir, F. M. and Iwamoto, K. and Hata, S. and Aid, S. R. and Othman, N. and Ida, T. and Murakami, Y. and Hara, H. (2021) The effectiveness of biological pretreatment of oil palm empty fruit bunch on its conversion into bio-coke. Bioresource Technology Reports, 15 . ISSN 2589-014X

Komaki, Shozo (2015) Wireless Communication and Their Mathematics. In: International Conference on Mathematics, Engineering and Industrial Applications 2014 (ICoMEIA 2014), 28-30 May 2014, Penang, Malaysia.

Komaro, M. and Suherman, A. and Ariyano, Ariyano and Pangestu, R. and Minghat, A. D. (2020) Development of interactive multimedia to overcome difficulties in isomorphous binary phase diagram learning materials. International Journal of Advanced Science and Technology, 29 (7). pp. 284-289. ISSN 2005-4238

Kon, Suh Kee and Kamarudin, Khairul Sozana Nor and Mat, Hanapi (2005) Activated carbon based adsorptive natural gas storage. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Kong, Wan Looi (2010) Mutation of cyclodextrin glycosyltransferase by domain swapping and site-directed mutagenesis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Koopialipoor, Mohammadreza and Armaghani, Danial Jahed and Hedayat, Ahmadreza and Marto, Aminaton and Gordan, Behrouz (2019) Applying various hybrid intelligent systems to evaluate and predict slope stability under static and dynamic conditions. Soft Computing, 23 (14). pp. 5913-5929. ISSN 1432-7643

Koopialipoor, Mohammadreza and Tootoonchi, Hossein and Marto, Aminaton and Faizi, Koohyar and Armaghani, Danial Jahed (2020) Various effective factors on peak uplift resistance of pipelines in sand: a comparative study. International Journal of Geotechnical Engineering, 14 (7). pp. 820-827. ISSN 1938-6362

Koshiba, Y. and Hoshina, T. A. and Okada, M. and Tsuji, T. and Hiaki, T. (2018) Bubble point pressure and some dielectric properties of propane + ethanol liquid mixture at 303.2 K. Kagaku Kogaku Ronbunshu, 44 (4). pp. 223-238. ISSN 0386-216X

Koshiba, Y. and Hoshina, T. A. and Okada, M. and Tsuji, T. and Hiaki, T. (2018) Bubble Point Pressure and Some Dielectric Properties of Propane plus Ethanol Liquid Mixture at 303.2 K. Kagaku Kogaku Ronbunshu, 44 (4). pp. 223-238. ISSN 0386-216X

Kouhnavard, M. and Ahmad Ludin, N. and Vazifehkhah Ghaffari, B. and Sopian, K. and Abdul Karim, N. and Miyake, M. (2016) An efficient metal-free hydrophilic carbon as a counter electrode for dye-sensitized solar cells. International Journal of Photoenergy, 2016 . ISSN 1110-662X

Kouhnavard, M. and Ludin, N. A. and Ghaffari, B.V. and Ikeda, S. and Sopian, K. and Miyake, M. (2016) Hydrophilic carbon/TiO2 colloid composite: a potential counter electrode for dye-sensitized solar cells. Journal of Applied Electrochemistry, 46 (2). pp. 259-266. ISSN 0021-891X

Kouhnavard, Mojgan and Ludin, Norasikin Ahmad and Ghaffari, Babak V. and Sopian, Kamarozzaman and Ikeda, Shoichiro (2015) Carbonaceous Materials and Their Advances as a Counter Electrode in Dye-Sensitized Solar Cells: Challenges and Prospects. Chemsuschem, 8 (9). pp. 1510-1533. ISSN 1860-949X

Kow, Mee Yee and Lim, Teck Loon and Abu Bakar, Nooh and Yip, M. W. (2015) A case study: maturity assessment of product lifecycle management (PLM) implementation in Malaysia automotive components manufacturing company. International Journal Of Innovative Computing, 5 . pp. 1-4. ISSN 2180-4370

Kow, Mee Yee and Lim, Teck Loon and Abu Bakar, Nooh and Yip, M. W. (2014) A case study: maturity assessment of product lifecycle management (PLM) implementation in Malaysia automotive components manufacturing company. In: International Graduate Conference on Engineering, Science & Humanities 2014 (IGCESH 2014), 19-21 August, 2014, Skudai, Johor.

Krishna, L. S. and Yuzir, A. and Yuvaraja, G. and Ashokkumar, V. (2017) Removal of Acid Blue25 from aqueous solutions using Bengal gram fruit shell (BGFS) biomass. International Journal of Phytoremediation, 19 (5). pp. 431-438. ISSN 1522-6514

Krishnan, S. and Magalingam, P. and Ibrahim, R. (2021) Hybrid deep learning model using recurrent neural network and gated recurrent unit for heart disease prediction. International Journal of Electrical and Computer Engineering, 1 (6). ISSN 2088-8708

Kumaresan, Sivakumar and Foo, Dominic Chwan Yee and Abdul Aziz, Ramlan and Sarmidi, Mohamad Roji (2005) The use of computer-aided process design and simulation tools in undergraduate research projects. In: Regional Conference on Engineering Education RCEE 2005, 12-13 Dec 2005, Johor, Malaysia.

Kumaresan, Sivakumar and Sarmidi, Mohamad Roji (2003) A preliminary study into the effect of processing on Eurycoma longifolia water extract yield. Proceedings of International Conference on Chemical and Bioprocess Enginering, 2 . pp. 750-754.

Kuppusamy, P. and Samy, G. N. and Maarop, N. and Magalingam, P. and Kamaruddin, N. and Shanmugam, B. and Perumal, S. (2020) Systematic literature review of information security compliance behaviour theories. In: 2nd International Conference on Recent Advancements in Science and Technology, ICoRAST 2019, 28-30 Oct 2019, Putrajaya, Malaysia.

Kurniasih, Dwi and Jasmi, Kamarul Azmi and Basiron, Bushrah and Huda, Miftachul and Maseleno, Andino (2018) The Uses of Fuzzy Logic Method for Finding Agriculture and Livestock Value of Potential Village. International Journal of Engineering & Technology, 7 (3). pp. 1091-1095. ISSN 2227-524X

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Dual effects of supported W catalysts for dehydroaromatization of methane in the absence of oxygen. Catalysis Letters, 102 (1-2). pp. 69-78. ISSN 1011-372X

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Production of gasoline range hydrocarbons from catalytic reaction of methane in the presence of ethylene over W/HZSM-5. Catalysis Today, 106 . pp. 271-274. ISSN 0920-5861

Kusmiyati, Kusmiyati (2006) A single-step catalytic process for the conversion of methane to gasoline over tungsten zeolite catalysts. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Bifunctional catalysis of W/HZSM-5 for dehydroaromatization of methane in the absence of oxygen. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2007) Conversion of methane to gasoline range hydrocarbons over W/HZSM-5 catalyst: effect of co-feeding. In: The 2nd International Conference on Advances in Petrochemicals and Polymers ICAPP 2007, June 25-28, 2007, Bangkok, Thailand. (Unpublished)

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Dehydroaromatization of methane in the absence of oxygen over modified W/HZSM-5 catalyst. In: Annual Fundamental Science Seminar 2005, July 4-5, 2005, Ibnu Sina Institute for Fundamental Science Studies, UTM.

Kusmiyati, Kusmiyati and Saidina Amin, Nor Aishah (2005) Production of gasoline range hydrocarbons from catalytic reaction of methane in the presence of ethylene over W/HZSM-5. In: Gas-Fuel 05, November 14-15, 2005, Brugge, Belgium.

Kuwano, N. and Horikami, S. and Linas, M. (2015) Electron microscopy study of grain boundary behavior in Pb-free solder materials for mitigation of whiskers. Materials Science Forum, 827 . pp. 341-346. ISSN 0255-5476

Kuwano, Noriyuki and Kaur, Jesbains and Siti Rahmah, Siti Rahmah (2019) Electron microscopy determination of crystallographic polarity of aluminum nitride thin films. Micron, 116 . pp. 80-83. ISSN 0968-4328

L

Lokman, Nur Aleya and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Yuzir, Muhammad Ali (2021) A brief review on biochemical oxygen demand (BOD) treatment methods for palm oil mill effluents (POME). Environmental Technology and Innovation, 21 . p. 101258. ISSN 2352-1864

Lai, Ping Yean and Ismail, Ahmad Fauzi (2001) Optimization of formation process in development of high performance of asymmetric membranes. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 133-137.

Lam, Hon Loong and Ibrahim, Kamarul Asri (2002) Improved multivariable statistical process control (MSPSC) for chemical process fault detection and diagnosis (PFDD) - Cross-variable correlation approach. In: Regional Symposium on Chemical Engineering (RSCE) in conjunction with 16th Symposium of Malaysian Chemical Engineers, 27-30 October 2002, Petaling Jaya, Malaysia. (Submitted)

Lashkari, Arash Habibi and Abdul Manaf, Azizah and Masrom, Maslin and Mohd. Daud, Salwani (2011) A survey on image steganography algorithms and evaluation. In: The International Conference on Digital Information Processing and Communications (ICDIPC), 7-9 July 2011, VSB-Technical University of Ostrava, Ostrava, Czech.

Latif, K. A. and Mahmood, N. H. N. and Ali, N. R. M. (2020) Exploring sustainable human resource management change in the context of digital banking banking. Journal of Environmental Treatment Techniques, 8 (2). ISSN 2309-1185

Latiff, M. H. A. and Songip, Ahmad Rahman and Nasri, N. S. and Tutuk, D. K. (2004) The characterization of Ni-based catalysts for autothermal reforming process. Proceedings of 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-79.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Roles and responsibilities of construction players in projects using building information modeling (BIM). In: 12th IFIP WG 5.1 International Conference on Product Lifecycle Management in the Era of Internet of Things, PLM 2015, 19-21 Oct 2015, Doha, Qatar.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Transformation of Malaysian construction industry with Building Information Modelling (BIM). In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Latifi, N. and Eisazadeh, A. and Marto, A. and Meehan, C. L. (2017) Tropical residual soil stabilization: A powder form material for increasing soil strength. Construction and Building Materials, 147 . pp. 827-836. ISSN 0950-0618

Latifi, N. and Vahedifard, F. and Ghazanfari, E. (2018) Sustainable improvement of clays using low-carbon nontraditional additive. International Journal of Geomechanics, 18 (3). ISSN 1532-3641

Lau, Alvin Meng Shin and Mohd. Yusoff, Abd. Razak and Abdul Rahman, Muhammad Zulkarnain and Rasib, Abd. Wahid and Wan Kadir, Wan Hazli and Abu Sari, Mohd. Yazid and Darwin, Norhadija and Aziz, Muhammad Afiq (2015) Terrain analysis using unmanned aerial vehicle platform images. In: IEEE Workshop on Geoscience and Remote Sensing (IWGRS 2015), 16-17 Nov, 2015, Kuala Lumpur, Malaysia.

Lau, Woei Jye and Ismail, Ahmad Fauzi and Misdan, Nurasyikin and Kassim, Mohd. Azraai (2012) A recent progress in thin film composite membrane: a review. Desalination, 287 . pp. 190-199. ISSN 0011-9164

Law, Poh Liyn and Ab. Ghani, Hadhrami and Roslim, Farah Najwa and Amir Hamzah, Nur Asyiqin and Mohammed, Saeed Mohammed Abdulghani and Abdul Aziz, Nor Hidayati and Abd. Aziz, Azlan and Tan, Kim Geok and Azizan, Azizul (2020) Ant-colony and nature-inspired heuristic models for noma systems: a review. Telkomnika (Telecommunication Computing Electronics and Control), 18 (4). pp. 1754-1761. ISSN 1693-6930

Lee, David Ik Bing and Ismail, Ahmad Fauzi (2000) Latest development of carbon hollow fiber membranes for gas separation. In: Malaysian Science & Technology Congress (MSTC) 2000, 7-9 November 2000, Genting Highlands. (Unpublished)

Lee, K. X. and Shameli, K. and Miyake, M. and Ahmad Khairudin, N. B. B. and Mohamad, S. E. B. and Hara, H. and Mad Nordin, M. F. B. and Yew, Y. P. (2017) Gold nanoparticles biosynthesis: a simple route for control size using waste peel extract. IEEE Transactions on Nanotechnology, 16 (6). pp. 954-957. ISSN 1536-125X

Lee, K. X. and Shameli, K. and Yew, Y. P. and Teow, S. Y. and Jahangirian, H. and Rafiee Moghaddam, R. and Webster, T. J. (2020) Recent developments in the facile bio-synthesis of gold nanoparticles (AuNPs) and their biomedical applications. International Journal of Nanomedicine, 15 . pp. 275-300. ISSN 1176-9114

Lee, L. B. and Omar, J. and Simmathiri, R. and Mat, Hanapi and Idris, Ani and Emby, F. and Norbib, Normah (1997) Biodegradation of oily wastes and sludges. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Lee, Muhammad Hisyam and Mohamed, Hazura and Sarahintu, Mazalan and Salleh, Shaharuddin and Sanugi, Bahrom (2009) Application of taguchi's design of experiment in performance analysis of destination sequence distance vector (DSDV) routing protocol in mobile ad hoc networks. Sains Malaysiana, 38 (3). pp. 423-428. ISSN 0126-6039

Lee, P. Y. and Liew, P. Y. and Walmsley, T. G. and Wan Alwi, S. R. and Klemeš, J. J. (2020) Total site heat and power integration for locally integrated energy sectors. Energy, 204 . ISSN 0360-5442

Lee, Si Long (2012) Parallel image resizing in DCT domain using multi-core processor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Ya Ling (2001) The machine efficiency of (M/M/1) machine interference problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Yee Khai (2012) Mechanical properties of glass fibre reinforced concrete with palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Yen Soo (2002) Development of a prototype for Johore tourism information system in web environment. Masters thesis, Universiti Teknologi Malaysia, Computer Science and Information System.

Lee, Ting Hun and Mat, Hanapi (1997) The potential of citric acid production using pineapple waste. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Leong, Mohd. Salman and Lim, Meng Hee (2013) Blades rubs and looseness detection in gas turbines - operational field experience and laboratory study. Journal of Vibroengineering, 15 (3). pp. 1311-1321. ISSN 1392-8716

Leong, Shiang Chin (2003) Procurement method as conflict and dispute reduction mechanism for construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Leong, Wah Heng and Ahmad, Arshad (1997) Model based fault detection in process plant. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Li, Bing and Huang, Wen Li and Zhang, Chao and Feng, Sisi and Zhang, Zhenya and Lei, Zhong Fang and Sugiura, Norio (2015) Effect of TiO2 nanoparticles on aerobic granulation of algal-bacterial symbiosis system and nutrients removal from synthetic wastewater. Bioresource Technology, 187 . pp. 214-220. ISSN 0960-8524

Li, Jia Wei (2012) The system identification of HVAC artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Li, Jieming and Shimizu, Kazuya and Akasako, Haruna and Lu, Zhijiang and Akiyama, Shohei and Goto, Masafumi and Utsumi, Motoo and Sugiura, Norio (2015) Assessment of the factors contributing to the variations in microcystins biodegradability of the biofilms on a practical biological treatment facility. Bioresource Technology, 175 . pp. 463-472. ISSN 0960-8524

Li, X. and Nia, A. B. and Ma, X. and Yahya, M. Y. and Wang, Z. (2017) Dynamic response of Kevlar®29/epoxy laminates under projectile impact-experimental investigation. Mechanics of Advanced Materials and Structures, 24 (2). pp. 114-121. ISSN 1537-6494

Liat Choon, Tan and Hussin, Khadijah (2012) Towards e-government’s 3D property. International Journal of Scientific And Engineering Research, 3 (3). pp. 106-114. ISSN 2229-5518

Liew, Chong Wai and Md. Illias, Rosli and Hassan, Osman and Mahadi, Nor Muhammad and Najimuddin, Nazalan (2005) Genome sequence survey of local isolated alkaliphilic bacillus sp. GI. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Liew, C. L. and Talib, A. R. A. and Jacobs, R. L. (2016) Malaysian aviation technologist promotion to managerial role: an empirical overview. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Liew, P. Y. and Walmsley, T. G. and Wan Alwi, S. R. and Abdul Manan, Z. and Kleme\x9A, J. J. and Varbanov, P. S. (2016) Integrating district cooling systems in Locally Integrated Energy Sectors through Total Site Heat Integration. Applied Energy, 184 . pp. 1350-1363. ISSN 0306-2619

Liew, Syh Yeh and Kamsah, Mohd Zaki (2001) Web-based data exchange system in chemical process engineering. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 492-497.

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-474. ISSN 1992-8645

Lilo, Moneer Ali and Latiff, L. A. and Abu, Aminudin and Al Mashhadany, Yousif I. (2016) Vibration fault detection and classifaction based on the fft and fuzzy logic. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4633-4637. ISSN 1819-6608

Lim, Chee Siang and Abdul Manan, Zainuddin and Sarmidi, Mohamad Roji (2003) Simulation modelling of the phase behaviour of palm oil with supercritical carbon dioxide. Proceeding of International Conference On Chemical and Bioprocess Engineering . pp. 427-434.

Lim, Ai Ling (2015) The influence of e-participation as antecedent on behavioural intention to use among Sarawak e-filers. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Lim, Chee Siang and Abdul Manan, Zainuddin and Mustapa, Ana Najwa (2005) Separation performance of supercritical carbon dioxide extraction column for crude palm oil processing: observation using process simulator. In: Symposium Of Malaysian Chemical Engineers SOMChE 2005, 8-10 Dec 2005, Universiti Malaysia Sabah. (Submitted)

Lim, K. M. and Ghazali, N. F. (2020) Estimation of solute transport parameter and mass transfer coefficient in nanofiltration for solvent diluted palm oil. In: Energy Security and Chemical Engineering Congress 2019, ESChE 2019, 17 July - 19 July 2019, Kuala Lumpur, Malaysia.

Lim, Ki Min and Ghazali, Nazlee Faisal (2021) Nanofiltration of binary palm oil/solvent mixtures: Experimental and modeling. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Lim, Kok Cheng and Selamat, Ali and Mohamed Zabil, Mohd. Hazli and Selamat, Md. Hafiz and Alias, Rose Alinda and Mohamed, Farhan and Krejcar, Ondrej (2020) A comparative study of major clustering techniques for MAR learning usability prioritization processes. In: 19th International Conference on New Trends in Intelligent Software Methodologies, Tools and Techniques, SoMeT 2020, 22 - 24 September 2020, Virtual, Online.

Lim, Meng Hee and Leong, Mohd Salman @ Yew Mun and Kar, Hoou Hui and Ooi, Ching Sheng and Wai, Keng Ngui (2018) An improved image processing approach for machinery fault diagnosis. In: Proceedings of Montreal 2018 Global Power and Propulsion Forum, 7 May 2018 through 9 May 2018, Montreal.

Lim, Meng Hee and Leong, Mohd. Salman @ Yew Mun and Hui, Kar Hoou and Ooi, Ching Sheng (2018) Diagnosis of reduction gear failures of a power generation gas turbine due to excessive pipe strain. In: Proceedings of Montreal 2018 Global Power and Propulsion Forum, 7 May 2018 through 9 May 2018, Montreal.

Lim, See Leng (2012) VLSI design of sorting algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Soon Huat and Mohd. Noor, Norliza (2020) Machine learning application in predictive maintenance on an automation line. ARPN Journal of Engineering and Applied Sciences, 15 (23). pp. 2830-2838. ISSN 1819-6608

Lim, Teck Loon and Kow, Mee Yee and Abu Bakar, Nooh and Yip, M. W. (2015) Case studies in implementing dynamic production planning and scheduling system in make-to-order high-mix-low-volume small and medium-scaled industries for production efficiency. International Journal Of Innovative Computing Journal, 5 (1). pp. 5-8. ISSN 2180-4370

Lim, Teck Loon and Kow, Mee Yee and Abu Bakar, Nooh and Yip, M. W. (2014) Case studies in implementing dynamic production planning and scheduling system in make-to-order high-mix-low-volume small and medium-scaled industries for production efficiency. In: International Graduate Conference on Engineering, Science and Humanities (IGCESH2014)International Graduate Conference on Engineering, Science and Humanities (IGCESH2014), 19-21 August, 2014, Johor Bahru, Malaysia.

Lim, W. Y. and Abu Bakar, N. A. and Hassan, N. H. and Mohd. Zainuddin, N. M. and Mohd. Yusoff, R. C. and Ab. Rahim, N. Z. (2021) Using machine learning to forecast residential property prices in overcoming the property overhang issue. In: 3rd IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2021, 13 September 2021 - 15 September 2021, Kota Kinabalu, Sabah.

Lim, W. Y. and Abu Bakar, N. A. and Hassan, N. H. and Zainuddin, N. M. M. and Yusoff, R. C. M. and Ab. Rahim, N. Z. (2021) Unmanned aerial vehicle (UAV) gps jamming test by using software defined radio (SDR) platform. In: 3rd IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2021, 13 September 2021 - 15 September 2021, Kota Kinabalu, Sabah.

Lim, Wen Hong (2008) Interpolation and mapping of the total electron content over the Malaysian region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lim, Y. K. and Sarip, S. and Kaidi, H. M. and Rey, J. A. A. and Samsuddin, N. M. and Muhtazaruddin, M. N. and Sukki, F. M. and Aziz, S. A. (2021) Current status and possible future applications of marine current energy devices in Malaysia: a review. IEEE Access, 9 . ISSN 2169-3536

Lim, Yee Fang and Mohd. Azmi, Nurulhuda Firdaus and Yahya, Yazriwati and Sarkan, Haslina and Amir Sjarif, Nilam Nur and Chuprat, Suriayati (2018) Mobile business intelligence acceptance model for organisational decision making. Bulletin of Electrical Engineering and Informatics, 7 (4). pp. 650-656. ISSN 2089-3191

Lim, You Rang and Ariffin, Aini Suzana and Ali, Mazlan and Chang, Kuei Lun (2021) A hybrid MCDM model for live-streamer selection via the fuzzy Delphi method, ahp, and topsis. Applied Sciences (Switzerland), 11 (19). pp. 1-15. ISSN 2076-3417

Lim, Fang Yee and Abdul Manan, Zainuddin (2001) Development of a systematic technique for simultaneous reduction of energy and water in chemical process plants. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 477-483.

Lim, Kai Shin and Kamarudin, Khairul Sozana Nor and Chieng, Yu Yuan and Hamdan, Halimaton and Mat, Hanapi (2004) Structural and gas adsorption properties of cation exchanged zeolites. Proceedings of The 18th Symposium of Malaysian Chemical Engineers SOMChE 2004, 1 . pp. 1-86.

Lit, Asrani (2012) Network partitioning and IP placement in network on chip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liu, W. H. and Wan Alwi, S. R. and Hashim, H. and Lim, J. S. and Mohammad Rozali, N. E. and Ho, W. S. (2016) Sizing of Hybrid Power System with varying current type using numerical probabilistic approach. Applied Energy, 184 . pp. 1364-1373. ISSN 0306-2619

Lo, Po Kim and Md. Illias, Rosli and Hassan, Osman and Mahadi, Nor Muhammad and Ahmad, Arshad (2005) Secretory overexpression of CGTase gene from bacillus sp. G1 in escherichia coli. In: 27th Symposium of Malaysian Society for Microbiology, 24-27th November 2005, Grand Plaza Park Royal Penang.

Loh, Melissa Pei Shian and Syamsul Baharil, Nur Aishah and Ting, Lee Yu and M., Taher and Abdul Majid, Fadzilah Adibah (2005) Pilot scale extraction of proteolytic enzyme bromelain from pineapple (ananas comosus). In: 2nd International Conference on Chemical and Bioprocess Engineering in conjunction with 19th Symposium of Malaysian Chemical Engineers (SOMChE 2005), 8-10 December 2005, Kota Kinabalu, Sabah.

Lokman, N. A. and Ithnin, A. M. and Ramli, M. N. and Bahar, N. D. and Yahya, W. J. (2019) Effect of filtered palm oil mill effluent (pome) via close loop in-line microbubbles treatment chamber for biochemical oxygen demand (bod) treatment. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 10-19. ISSN 2289-7879

Looi, Yat Seong and Abd. Latif, Fazilah and Norbib, Normah and Mohd. Said, Nazlan (1997) Antithrombin protein from hirudinaria manillensis: Preliminary studies on isolation, sequencing of the antithrombin protein and cloning of the desired gene. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Lotf, E. A. and Jacob, M. V. and Ghassemi, H. and Zakeri, M. and Nasef, M. M. (2021) Highly conductive anion exchange membranes based on polymer networks containing imidazolium functionalised side chains. Scientific Reports20452322, 11 (1). ISSN 2045-2322

Lotfy, Eslam Reda and Zaki, Sheikh Ahmad and Harun, Zambri (2018) Modulation of the atmospheric turbulence coherent structures by mesoscale motions. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (4). p. 178. ISSN 1678-5878

M

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaluddin, Khairur Rijal and Mat Nor, F. (2014) The influence of SS316l foam fabrication parameter using powder metallurgy route. In: 5th International Conference on Material and Manufacturing Technology, ICMMT 2014, 8-9 May, 2014, Kuala Lumpur, Malaysia.

Muhalim, Nur Amanina Damira and Hassan, Mohamad Zaki and Md. Daud, Mohd Yusof (2017) Studies on the quasi-static and ultrasonic compression of copper tube filled with polyvinyl chloride (PVC) foam. Journal of Advanced Research in Applied Mechanics, 32 (1). pp. 1-8. ISSN 2289-7895

Mohebbi, R. and Lakzayi, H. and Sidik, N. A. C. and Japar, W. M. A. A. (2018) Lattice Boltzmann method based study of the heat transfer augmentation associated with Cu/water nanofluid in a channel with surface mounted blocks. International Journal of Heat and Mass Transfer, 117 . pp. 425-435. ISSN 0017-9310

Mohd. Sakri, Fadhilah and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Azizan, Mohd. Amzar (2018) Numerical study on air-core vortex inside draining tank using different computational modelling approaches. Jurnal Teknologi, 8 (1). pp. 101-109. ISSN 2180-3722

Mohd. Maruai, Nurshafinaz and Mat Ali, Mohamed Sukri and Ismail, Mohamad Hafiz and Zaki, Sheikh Ahmad (2018) Flow-induced vibration of a square cylinder and downstream flat plate associated with micro-scale energy harvester. Journal of Wind Engineering and Industrial Aerodynamics, 175 . pp. 264-282. ISSN 0167-6105

Maeda, K. and Hong, C. and Asako, Y. (2019) Flow characteristics of transition region between laminar and turbulent gas flows through micro-tubes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (1). pp. 10-19. ISSN 2289-7879

Mohd. Hapipi, Norhiwani and Mazlan, Saiful Amri and Ubaidillah, U. and Homma, Koji and Abdul Aziz, Siti Aishah and Nordin, Nur Azmah and Bahiuddin, Irfan and Nazmi, Nurhazimah (2020) The rheological studies on poly(vinyl) alcohol-based hydrogel magnetorheological plastomer. Polymers, 12 (10). pp. 1-15. ISSN 2073-4360

Mehmood, Ahsan and Mubarak, N. M. and Khalid, Mohammad and Jagadish, Priyanka and Walvekar, Rashmi and Abdullah, E. C. (2020) Graphene/PVA buckypaper for strain sensing application. Scientific Reports, 10 (1). p. 20106. ISSN 2045-2322

Mohamad, Syazwani and Shahira Liza, Shahira Liza and Yaakob, Yazid (2020) Strengthening of the mechanical and tribological properties of composite oxide film formed on aluminum alloy with the addition of graphite. Surface and Coatings Technology, 403 . p. 126435. ISSN 0257-8972

Mohd. Nizam, Nurul Najwa and Kamardin, Kamilia and Yamada, Yoshihide and Idris, Izni Husna and Abd. Rahman, Nurul Huda and Mad Kaidi, Hazilah (2020) Fabrication of human body phantom for body centric communication systems at 2.4 GHz. International Journal of Integrated Engineering, 12 (6). pp. 20-26. ISSN 2229-838X

Muhammad Azrin, Muhammad Fiqri and Moorthy, Vishnukumar Krishna and Jasmi, Kamarul Azmi (2019) Media Sosial dan Perhubungan Sesama Manusia Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Moktar, Noor Athirah and Abdul Halim, Areen Sherryna and Jasmi, Kamarul Azmi (2019) Media Sosial dan Kaedah Pengajaran Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

M., Taher and Abdul Majid, Fadzilah Adibah and Sarmidi, Mohamad Roji (2003) Insulin potentiating activity of cinnamomum extract on 3T3-L1 adipocytes. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 270-273.

M. Ariff, M. Farid and Setan, Halim and Majid, Zulkepli and Albert, K. Chong (2008) A stereophotogrammetric technique for forensic measurement of surveillance images. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

M. Idris, Khairulnizam and Setan, Halim (2009) Communication and database modules for automatic data acqusition. Geoinformation Science Journal , 9 (1). pp. 1-10. ISSN 1511-9491

M. Idris, Khairulnizam and Setan, Halim (2008) Precise Dimensional Measurement of A Helicopter model using Geodetic and Non-Contact Measurement Techniques. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

M. Krishnasamy, K. T. and Mustakim, S. S. and Tham, J. H. and Minghat, A. D. and Sulaiman, T. (2020) An evaluation on the implementation of International General Certificate in Secondary Education (IGCSE) curriculum towards international assessment benchmark. International Journal of Advanced Science and Technology, 29 (9). pp. 981-991. ISSN 2005 - 4238

M. L., Nurul Hanira and Che Man, H. and Rashid, M. and Chuah, A. L. and Abdullah, A. M. (2017) Pre-treatment of ammonia-nitrogen (NH3 –N) removal from scheduled waste leachate by air stripping. Page 1 Desalination and Water Treatment, 68 . pp. 330-337. ISSN 1944-3994

M. Lehan, N. F. A. and Azahari, R. K. and Hisyam, K. K. (2020) Business continuity and resiliency planning in disaster prone area of Sabah, Malaysia. Disaster Advances, 13 (7). pp. 25-32. ISSN 0974-262X

M. Noor, N. and Roseli, A. F. and Dahlan, Z. and M. Kassim, R. and Yunus, A. and M. Rijal, O. (2019) Logistic regression scoring index for detection of interstitial lung disease. ARPN Journal of Engineering and Applied Sciences, 14 (5). ISSN 1819-6608

M. Noor, Norliza and Than, Joel C. M. and Rijal, Omar M. and M. Kassim, Rosminah and Yunus, Ashari and Zeki, Amir A. and Anzidei, Michele and Saba, Luca and Suri, Jasjit S. (2015) Automatic Lung Segmentation Using Control Feedback System: morphology and Texture Paradigm. Journal Of Medical Systems, 39 (3). p. 22. ISSN 0148-5598

M. Ongkudon, Clarence and Abdul Rahman, Badarulhisam and Abdul Aziz, Azila (2005) Screening of the Sf900-II SFM insect cell culture medium and recombinant baculovirus for the expression of recombinant human transferrin. In: 15th MSMBB Annual Scientific Meeting, 4-5 April 2005, Kuala Lumpur.

M. Sanip, Suhaila and Ismail, Ahmad Fauzi and Buang, Nor Aziah and A. Majid, Zaiton and Saidin, Mohd. Abdul Razis (2005) Hydrogen sorption capacity of as-grown multiwalled nanotubes (MWNTs). In: The XXII Regional Conference on Solid State Science & Technology (RCSST' 05), 18-21 Dec 2005, Kuantan, Pahang.

M. Saqr, Khalid and S. Aly, Hossam and A. Wahid, Mazlan and M. Sies, Mohsin (2009) Numerical simulation of confined vortex flow using a modified k-£ turbulence model. CFD Letters, 1 (2). pp. 87-94. ISSN 2180-1363

M. Shahrulnizam, M. R. and Adzim, S. K. and Kamaruddin, Samira Albati (2020) Flood mitigation measures in urban areas of Malaysia using the integrated catchment modelling approach. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 November 2019 - 26 November 2019, Putrajaya, Malaysia.

M. Yassin, Abu Azam and Ismail, Abdul Razak and Othman, Ariff and Hashim, Ayob and Kamis, Azmi and Hamid, M. Fauzi and Abdul Manan, Muhammad and Shahrudin, Shahrin and Hassan, Zulkafli (1988) Oil well: brief description. In: Oilwell Drilling Engineering: Principles and Practice. Penerbit UTM, Skudai, Johor Bahru, Malaysia.

M. Yunus, M. Y. and Ali, Mohamad Wijayanuddin and Kamsah, Mohd. Zaki (2003) Development of rule-based advisory system from modified hazard and operability study on fatty acid fractionation column. In: International Conference on Chemical and Bioprocess Engineering ICCBPE 2003 , 27-29 August 2003, Kota Kinabalu. (Submitted)

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2018) Eccentricity-based design procedure of confined columns under compression and in-plane bending moment. Measurement: Journal of the International Measurement Confederation, 129 . pp. 11-19. ISSN 0263-2241

Maarop, Nurazean and Thamadharan, Kavitha (2015) The acceptance of e-assessment considering security perspective: work in progress. International Science Index: Computer And Science Engineering, 9 (3). pp. 874-879. ISSN 1307-6892

Machmud, A. and Minghat, A. D. B. (2020) The price dynamics of hand sanitizers for covid-19 in Indonesia: exponential and cobweb forms. Indonesian Journal of Science and Technology, 5 (2). pp. 176-184. ISSN 2528-1410

Mad Kaidi, H. and Ahmad, N. and Mohd. Izhar, M. A. and Mohd. Sam, S. and Fisal, N. (2016) Irregular repetition code hybrid ARQ in wireless system. Jurnal Teknologi, 78 (6-2). pp. 1-6. ISSN 0127-9696

Mad Kaidi, Hazilah and Ahmad, Norulhusna and Dziyauddin, Rudzidatul Akmam and Mohamed, Norliza and Abdul Latiff, Liza and Usman, Sahnius and Ahmad, Robiah and Sarip, Shamsul (2020) Internet of things: a monitoring and control system for rockmelon farming. International Journal of Integrated Engineering, 12 (6). pp. 55-61. ISSN 2229-838X

Madadi Ardekani, Sara (2012) Mechanical and thermal properties of Montmorillonite filled newspaper fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Madam, A. and Yusof, R. (2016) Malaysian traffic sign dataset for traffic sign detection and recognition systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 137-143. ISSN 2180-1843

Madani, A. and Yusof, R. (2016) Traffic sign detection based on simple XOR and discriminative features. Jurnal Teknologi, 78 (6-2). pp. 97-102. ISSN 0127-9696

Madani, A. and Yusof, R. (2018) Traffic sign recognition based on color, shape, and pictogram classification using support vector machines. Neural Computing and Applications, 30 (9). pp. 2807-2817. ISSN 0941-0643

Madar, Mohamed and Subari, Mustafa Din and Baqutayan, Shadiya M. S. (2017) Inter-institutional Framework towards Improvising SDGs in Somaliland: The Transformative Paradigm. International And Multidisciplinary Journal Of Social Sciences-Rimcis, 6 (3). pp. 307-329. ISSN 2014-3680

Madhanagopal, J. and Singh, O. P. and Sornambikai, S. and Omar, A. H. and Sathasivam, K. V. and Fatihhi, S. J. and Abdul Kadir, M. R. (2017) Enhanced wide-range monotonic piezoresistivity, reliability of Ketjenblack/deproteinized natural rubber nanocomposite, and its biomedical application. Journal of Applied Polymer Science, 134 (25). ISSN 0021-8995

Maetouq, Ali and Mohd. Daud, Salwani and Ahmad, Noor Azurati and Maarop, Nurazean and Sjarif, Nilam Nur Amir and Abas, Hafiza (2018) Comparison of hash function algorithms against attacks: a review. International Journal of Advanced Computer Science and Applications, 9 (8). pp. 98-103. ISSN 2158-107X

Magalingam, Pritheega and Ibrahim, Roslina and Krishnan, Surenthiran (2018) Review on data analytics framework in heart disease. Open International Journal of Informatics (OIJI), 6 (4). pp. 42-53. ISSN 2289-2370

Magendran, S. S. and Khan, F. S. A. and Mubarak, N. M. and Khalid, M. and Walvekar, R. and Abdullah, E. C. and Nizamuddin, S. and Karri, R. S. (2019) Synthesis of organic phase change materials by using carbon nanotubes as filler material. Nano-Structures and Nano-Objects, 19 . ISSN 2352-507X

Mahamud, Rosadah and Hussein, Khadijah (2001) Kajian ke atas keupayaan membeli rumah bagi golongan sederhana di kawasan Johor Bahru. Project Report. UTM. (Unpublished)

Mahandran, C. J. and Fatah, A. Y. A. and Bani, N. A. and Kaidi, H. M. and Muhtazaruddin, M. N,. and Amran, N. B. (2019) Thermal oxidation improvement in semiconductor wafer fabrication. International Journal of Power Electronics and Drive Systems, 10 (3). pp. 1141-1147. ISSN 2088-8694

Mahardika, Destrian Adi (2012) Risk management of bridge construction project in Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mahat, S. B. and Man, H. C. and Idris, A. M. and Kamal, A. M. M. and Abdullah, L. C. and Shreeshivadasan, C. (2021) Dynamic anaerobic membrane bioreactor DAnMBR) with phase separation for food processing wastewater treatment at mesophilic temperature: characterization of cake layer. Journal of Environmental Chemical Engineering, 9 (4). ISSN 2213-3437

Mahat, Siti Baizurah and Omar, R. and Che Man, H. and Mohamad Idris, A. I. and Mustapa Kamal, S. M. and Idris, A. and Shreeshivadasan, C. and Jamali, N. S. and Abdullah, L. C. (2021) Performance of dynamic anaerobic membrane bioreactor (DAnMBR) with phase separation in treating high strength food processing wastewater. Journal of Environmental Chemical Engineering, 9 (3). p. 105245. ISSN 2213-3437

Mahdi, Taha H. and Ahmad, Arshad and Nasef, Mohamed Mahmoud and Ripin, Adnan (2015) State-of-the-art technologies for separation of azeotropic mixtures. Separation and Purification Reviews, 44 (4). pp. 308-330. ISSN 1542-2119

Mahdi, Nor Haslinda (2004) The Effectiveness of Lead Time Subsystem in Kenwood Electronic Technology (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Mahdiyar, Amir and Armaghani, Danial Jahed and Marto, Aminaton and Nilashi, Mehrbakhsh and Ismail, Syuhaida (2019) Rock tensile strength prediction using empirical and soft computing approaches. Bulletin of Engineering Geology and the Environment, 78 (6). pp. 4519-4531. ISSN 1435-9529

Mahdiyar, Amir and Marto, Aminaton and Mirhosseinei, Seyed Abolghasem (2018) Probabilistic air-overpressure simulation resulting from blasting operations. Environmental Earth Sciences, 77 (4). p. 123. ISSN 1866-6280

Mahdiyar, Amir and Tabatabaee, Sanaz and Abdullah, Arham and Marto, Aminaton (2018) Identifying and assessing the critical criteria affecting decision-making for green roof type selection. Sustainable Cities and Society, 39 . pp. 772-783. ISSN 2210-6707

Mahmod, S. M. and Daud, S. M. and Yuhaniz, S. S. and Azizan, A. and Sjarif, N. N. A. (2017) Improving accuracy of decoding process with pore-based fingerprint fuzzy vault in biometric cryptosystem. Advanced Science Letters, 23 (5). pp. 4068-4073. ISSN 1936-6612

Mahmood, Muhammad Syarafi and Khairuddin, Uswah and Mohd. Khairuddin, Anis Salwa (2021) Vehicles trajectories analysis using piecewise-segment dynamic time warping (PSDTW). In: 2nd International Conference on Innovative Technology, Engineering and Sciences, iCITES 2020, 22 - 22 December 2020, Pekan, Pahang.

Mahmood, Noor Shakir and Ajmi, Ahmed Ali and Sarip, Shamsul and Jamaludin, Khairur Rijal and Mad Kaidi, Hazilah and Abdul Talib, Hayati (2021) Implications COVID-19 on performance and energy management in the production electricity. Computers, Materials and Continua, 69 (1). pp. 895-911. ISSN 1546-2218

Mahmood, Noor Shakir and Ajmi, Ahmed Ali and Sarip, Shamsul and Mad Kaidi, Hazilah and Jamaludin, Khairur Rijal and Abdul Talib, Hayati Habibah (2020) Energy management cultures assessment and its impact on the quality of service in power plants a research gap for future studies. Palarchs Journal of Archaeology of Egypt/Egyptolog, 17 (7). pp. 11398-11412. ISSN 1567-214X

Mahmood, Y. and Kama, N. and Azmi, A. (2020) A systematic review of studies on use case points and expert-based estimation of software development effort. Journal of Software: Evolution and Process, 32 (7). ISSN 2047-7481

Mahmood, Y. and Kama, N. and Azmi, A. and Ya'acob, S. (2020) An IoT based home automation integrated approach: impact on society in sustainable development perspective. International Journal of Advanced Computer Science and Applications, 11 (1). pp. 240-250. ISSN 2158-107X

Mahmood, Yasir and Kama, Nazri and Azmi, Azri and Khan, Ahmad Salman and Ali, Mazlan (2021) Software effort estimation accuracy prediction of machine learning techniques: A systematic performance evaluation. Software - Practice and Experience, 52 (1). pp. 39-65. ISSN 0038-0644

Mahmoud, Abdelgadir M. and Osman, Omer M. (2020) Integrated framework to mitigate risks during strategy implementation. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences . pp. 36-42. ISSN 2349-7300

Mahmoud Nasef, Eithar Mohamed and Abu Bakar, Nur Azaliah (2020) Enterprise architecture “As-Is” analysis for competitive advantage. International Journal of Advanced Computer Science and Applications, 11 (7). pp. 102-107. ISSN 2158-107X

Mahmoudian, S. and Reza Sazegar, M. and Afshari, N. and Uzir Wahit, M. (2017) Graphene reinforced regenerated cellulose nanocomposite fibers prepared by lyocell process. Polymer Composites, 38 . E81-E88. ISSN 0272-8397

Mahmud, M. and Yusof, S. M. (2018) The influence of religiosity on safety behavior of workers: A Proposed Framework. Pertanika Journal of Social Sciences and Humanities, 26 (1). pp. 1-20. ISSN 0128-7702

Mahmud, Mohd. Razali (2010) Competency of hydrographic services. Hydro International, 14 (5). ISSN 1385-4569

Mahmud, Mohd. Razali and Gunathilaka, M. D. E. K. (2008) Inadequate sound velocity profile measurement’s artifacts in multibeam echosounder system data. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mahmud, Mohd. Razali and Juwit, Mohamad Kelana (2008) Classification of seafloor habitats using acoustic backscattering of multibeam echosounder systems. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mahmud, Mohd. Razali and Zainal, Norfariza (2008) Development of web-based GIS for marine data information. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mahmud, Shahril Anwar and Ahmad, Abdullah Sani and Megat Abdullah, Aminatuzuhariah (2012) Domestic possessions and space adequacy in urban homes. International Transaction Journal of Engineering, Management and Applied Sciences and Technologies, 3 (4). pp. 439-454. ISSN 1906-9642 (Electronic) ; 2228-9860 (Online)

Mahmud, Saimi @ Saini and Idris, Abdul Wahid (1994) Perkembangan Pengukuran Kadester di Sarawak. Buletin Ukur, 5 (1). pp. 15-35. ISSN 0128-4274

Mahrin, Mohd. Naz'ri and Che Mohd. Yusoff, Rasimah and Sulaiman, Nur Liyana (2015) Investigating factors contributing to the awareness of agile practices. In: The 7th International Conference on Internet (ICONI 2015), 13-16 Dec, 2015, Kuala Lumpur, Malaysia.

Mahrin, Mohd. Naz’Ri and Chuprat, Suriayati and Subbarao, Anusuyah and Mohd. Ariffin, Aswami Fadillah and Talib, Mohd. Zabri Adil and Ahmad Darus, Mohammad Zaharudin and Abd. Aziz, Fakhrul Afiq (2018) Malware prediction algorithm: Systematic review. Journal of Theoretical and Applied Information Technology, 96 (16). pp. 5438-5457. ISSN 1992-8645

Mahrous, Samar A. and Che Sidik, Nor Azwadi and Saqr, Khalid M. (2020) Newtonian and non-newtonian CFD models of intracranial aneurysm: A review. CFD Letters, 12 (1). pp. 62-86. ISSN 2180-1363

Maidin, Siti Nurhafizza and Azizan, Azizul and Abas, Hafiza and Mohd. Sam, Suriani and Abd. Ghani, Hadhrami and Abdul Hamid, Mohd. Johaary (2018) Review on implementation of IoT for environmental condition monitoring of crop or farm in agriculture sector. Open International Journal Of Informatics (OIJI), 6 (3). ISSN 2289-2370

Maindy, Uthayakumar (2011) Performance studies between wimax (802.16m) and lte advanced for 4g. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Majid, M. L. A. and Chuprat, S. (2020) Adapting market-oriented policies for scheduling divisible loads on clouds. International Journal of Distributed Systems and Technologies, 11 (2). pp. 45-55.

Majid, Zulkepli and Setan, Halim and Chong, Albert and Mohd. Said, Shaharuddin (2007) Three-dimensional modeling of tradisional Malaysian wooden engraving arts using close-range laser scanning technology. In: The 28th Asian Conference on Remote Sensing (ACRS) 2007, 2007, PWTC, Kuala Lumpur.

Majlan, Kamyar Ahmadi (2011) Synthesis and characterization of ni-cnt composite coating produced by direct electro plating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mak, Weng Yee and Asri Ibrahim, Kamarul (2009) Fault detection and diagnosis using correlation coefficients between variables. Jurnal Teknologi Siri, 50 (F). pp. 1-13. ISSN 2180-3722

Mak, Weng Yee and Ibrahim, Kamarul Asri (2003) Fault detection for distillation column using multivariate stastistical process control (MSPC). In: Symposium of Malaysian Chemical Engineers (SOMChE) 2003, 29-30 December 2003, Penang, Malaysia. (Submitted)

Makarim, D. A. and Tjahjana, D. D. D. P. and Cahyono, S. I. and Mazlan, S. A. (2019) Performance investigation of the crossflow water turbine by using CFD. In: 4th International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2018, 9-11 Okt 2018, Alana Hotel and Convention Center Surakarta, Indonesia.

Malakouti, M. and Rezaei, S. and Shahijan, M. K. (2017) Agile supply chain management (ASCM): a management decision-making approach. Asia Pacific Journal of Marketing and Logistics, 29 (1). pp. 171-182. ISSN 1355-5855

Malek, Afagh (2012) Assessment of ketchup companies performance in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Maliha, Ayman and Yusof, Rubiyah and Shapiai, Mohd. Ibrahim (2016) Extreme learning machine for structured output spaces. Neural Computing and Applications . pp. 1-14. ISSN 0941-0643 (In Press)

Malik, A. and Razak, A. A. and Nawi, M. R. M. and Saharuddin, R. and Zaki, S. A. (2016) Analysis of ventilation system on respiratory symptoms at child care centers. In: 8th Asian Conference on Refrigeration and Air-Conditioning, ACRA 2016, 15-17 May 2016, Taipei, Taiwan.

Malik, Muhammad Noman (2015) Human values identification and assessment tool development for TQM context. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Mamat, N. and Yakub, F. and Salim, S. A. Z. S. and Ali, M. S. M. and Putra, S. M. S. M. (2019) Analysis of implementation control device in hybrid mass damper system. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems, I2 CACIS 2018, 20 October 2018, Grand Blue Wave Hotel Shah Alam, Malaysia.

Mamat, Normaisharah and Yakub, Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri (2018) Performance comparison of controllers for suppressing the structural building vibration. Indonesian Journal of Electrical Engineering and Computer Science, 10 (2). pp. 537-544. ISSN 2502-4752

Mamat, Rizalman and Mohd. Ja'afar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2001) Pengaruh kaedah penyediaan fabrikasi/propelan ke atas kadar pembakaran. In: Proceding of National Seminar on Advance Material Development in Malaysia, 2001.

Mambou, S. and Krejcar, O. and Selamat, A. (2019) Approximate outputs of accelerated turing machines closest to their halting point. In: 11th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2019, 8-11 Apr 2019, Yogyakarta, Indonesia.

Mambou, Sebastien and Krejcar, Ondrej and Kuca, Kamil and Selamat, Ali (2018) Novel cross-view human action model recognition based on the powerful view-invariant features technique. Future Internet, 10 (89). pp. 1-17. ISSN 1999-5903

Mamoon, I. A. and Islam, A. K. M. M. and Baharun, S. and Ahmed, A. and Komaki, S. (2016) Cluster based architecture and network maintenance protocol for medical priority aware cognitive radio based hospital. In: 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016, 16 August 2016 through 20 August 2016, United States.

Manan, Muhammad Abdul and Mat, Hanapi and L., J. Ming (1997) Rheological properties of crude oil emulsion. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Mandala, Satria (2012) New framework for securing mobile adhoc network using lightweight authentication and signature-based intrusion detection system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mangruwa, Rajiv Dharma and Shaikh Salim, Sheikh Ahmad Zaki and Mohd. Mahdzir, Akbariah and Khalid, Waqas (2015) A review of cross-cultural analysis on energy behaviour consumption in residential building between Malaysia and Japan. In: Malaysia-Japan Joint International Conference 2015 (MJJIC 2015), 13-15 Nov, 2015, Japan.

Manickam, Yamuna and Mad Nordin, Mariam Firdhaus and Shameli, Kamyar and Wannahari, Rizki and Iqbal, Nida and Mohd. Shariff, Amir Husni (2015) Comparative studies on different kind of durian husks as microstructure activated carbon. Journal of Optoelectronics and Biomedical Materials, 7 (3). pp. 53-58. ISSN 2066-0049

Manikandan, Ayyar and Mani, Mohan P. and Jaganathan, Saravana Kumar and Rajasekar, Rathanasamy (2018) Morphological, thermal, and blood-compatible properties of electrospun nanocomposites for tissue engineering application. Polymer Composites, 39 . E132-E139. ISSN 0272-8397

Manoharan, E. and Othman, N. and Mohammad, R. and Chelliapan, S. and Tobi, S. U. M. (2020) Integrated approach as sustainable environment technique for managing construction waste : a review. Journal of Environmental Treatment Techniques, 8 (2). pp. 560-566. ISSN 2309-1185

Manshor, H. and Abdullah, E. C. and Azhar, A. Z. A. and Sing, Y. W. and Ahmad, Z. A. (2017) Microwave sintering of zirconia-toughened alumina (ZTA)-TiO2-Cr2O3 ceramic composite: the effects on microstructure and properties. Journal of Alloys and Compounds, 722 . pp. 458-466. ISSN 0925-8388

Manshor, H. and Ramli, A. W. and Ahmad Azhar, A. Z. and Abdullah, E. C. and Ahmad, Z. A. (2016) Effect of Cr2O3-TiO2 addition on the physical properties of zirconia toughened alumina. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Manshor, H. and Wan Sabri, W. M. I. and Ramli, A. W. and Ahmad Azhar, A. Z. and Abdullah, E. C. and Ahmad, Z. A. (2016) Effect of titania and magnesia on the physical properties of zirconia toughened alumina. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Manshor, Hanisah and Md. Aris, Suriyana and Ahmad Azhar, Ahmad Zahirani and Chan Abdullah, Ezzat and Ahmad, Zainal Arifin (2015) Effects of TiO2 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina ceramic composite. Ceramics Intertiol, 41 (3). pp. 3961-3967. ISSN 2728-842

Mansoor, N. and Baharun, S. and Islam, A. K. M. M. and Komaki, S. and Zareei, M. (2015) Cluster modelling for cognitive radio ad-hoc networks using graph theory. In: International Conference on Electrical, Automation and Mechanical Engineering (EAME 2015), May 2015, Xiamen, China.

Mansoor, N. and Islam, A. K. M. M. and Zareei, M. and Baharun, S. and Komaki, S. (2015) A stable cluster-based architecture for cognitive radio ad-hoc networks. In: 2014 IEEE Region 10 Conference, TENCON 2014, 22-25 Oct 2014, Bangkok, Thailand.

Mansoor, Nafees and Islam, A. K. M. Muzahidul and Zareei, Mahdi and Baharun, Sabariah and Wakabayashi, Toshio and Komaki, Shozo (2015) Cognitive Radio Ad-Hoc Network Architectures: a Survey. Wireless Personal Communications, 81 (3). pp. 1117-1142. ISSN 9284-9311

Mansor, M. S. F. and Zamzuri, H. and Jahari, A. N. M. and Puad, A. A. and Ahmad, F. and Mazlan, S. A. (2018) Modelling and force tracking control for newly type configuration of magneto-rheological damper. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-5). pp. 135-140. ISSN 2180-1843

Mansor, Muhammad Saiful Badri and Zakaria, Zulkarnay and Balkhis, Ibrahim and Abdul Rahim, Ruzairi and Abdul Sahib, Mohd. Fadzli and Md. Yunos, Yusri and Sahlan, Shafishuhaza and Bunyamin, Salinda and Abas, Khairul Hamimah and Ishak, Mohd. Hafis Izran and Danapalasingam, Kumeresan A. (2015) Magnetic induction tomography: a brief review. Jurnal Teknologi, 73 (3). pp. 91-95. ISSN 2180-3722

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2011) A developed asymmetric PVDF hollow fiber membrane structure for CO2 absorption. International Journal of Greenhouse Gas Control, 5 (2). pp. 374-380. ISSN 1750-5836

Mansur, Shaiful Amri and Mohamed, Miswan @ Abd. Hakim (2006) An assessment tool for monitoring project performance. Malaysian Journal of Civil Engineering, 18 (1). pp. 14-28. ISSN 1823-7843

Manteghi, Golnoosh and Limit, Hasanuddin and Remaz, Dilshan (2015) Water bodies an urban microclimate: a review. Modern Applied Science, 9 (6). pp. 1-12. ISSN 1913-1844

Manzo, K. and Padfield, R. (2016) Neoliberal colonialism?: A postcolonial reading of "land grabbing" in Africa. In: The Postcolonial World. Taylor and Francis Inc., pp. 509-525. ISBN 978-131529769-9

Mardhiah, T. A. and Akmal, T. Z. and Talib, A. H. Q. A. and Jalil, S. Z. A. and Aris, S. A. M. (2021) Stress classification based on human electromagnetic radiation analysis. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 218-226. ISSN 2502-4752

Mardi, Ahmad Shahlan and Fadzil @ Zulkifli, Abu Bakar (2000) Pengenalan kepada Oseanografi (Bahagian 1). Documentation. Fakulti Kejuruteraan Sains Dan Geoinformasi, Fakulti Kejuruteraan Sains Dan Geoinformasi.

Maresova, Petra and Soukal, Ivan and Svobodova, Libuse and Hedvicakova, Martina and Javanmardi, Ehsan and Selamat, Ali and Krejcar, Ondrej (2018) Consequences of industry 4.0 in business and economics. Economies, 6 (3). 46-1-46-14. ISSN 2227-7099

Marghany, Maged (2009) 3D coastal bathymetry reconstruction using topsar data. In: IEEE International Geoscience & Remote Sensing Symposium (IGARSS 2009), 2009, Cape Town, South Africa.

Marghany, Maged and Hashim, Mazlan (2009) Differential synthetic aperture radar interferometry (DINSAR) for 3D coastal geomorphology reconstruction. International Journal of Computer Science and Network Security, 9 (5). pp. 59-63. ISSN 1738-7906

Marghany, Maged and Hashim, Mazlan (2009) Frequency domain analysis of Fuzzy B-Spline for 3D tsunami visualization from remote sensing data. International Journal of Computer Science and Network Security, 9 (5). pp. 149-154. ISSN 1738-7906

Marghany, Maged and Hashim, Mazlan (2007) Fuzzy algorithm for 3D coastal geomorphology mapping by DInSAR. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium on GPS/GNS 2007, 2007, Johor Bahru.

Marghany, Maged and Hashim, Mazlan (2008) Utilization of fuzzy b-pline for three-dimensional tsunami wave reconstruction from quickbird satellite data. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre (PWTC), Kuala Lumpur, Malaysia.

Mariappan, Gengatharan (2006) Isu-isu pengintegrasian pangkalan data ukur kadaster dan sistem pendaftaran tanah berkomputer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Marlan, Z. M. and Jamaludin, K. R. and Harudin, N. and Jaafar, N. N. (2019) Determination of optimal unit space data for taguchi’s t-method based on homogeneity of output. Open International Journal of Informatics, 7 . pp. 167-179. ISSN 2289-2370

Marto, Aminaton and Othman, Bakhtiar Affandy (2018) Effects of sand sizes on engineering properties of tropical sand matrix soil. In: 2nd Geomeast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 ,The Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE), 24 November 2018 through 28 November 2018, Cairo.

Marto, Aminaton and Othman, Bakhtiar Affandy (2018) Liquefaction resistance of sand-fine mixtures: a review with current research on factors influencing liquefaction resistance. In: 5th Malaysia-Japan Joint International Conference (MJJIC 2018).

Maruai, N. M. and Ali, M. S. M. and Ismail, M. H. and Ihsan, N. A. M. and Sadzli, F. N. H. and Salim, S. A. Z. S. (2017) Wind energy harvesting from wind-induced vibration. Chemical Engineering Transactions, 56 . pp. 451-456. ISSN 2283-9216

Maruai, N. M. and Ali, M. S. M. and Ismail, M. H. and Shaikh, S. A. Z. and Shirakashi, M. and Muhamad, S. (2017) Comparative study on energy extraction from vibrating square cylinder. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2581-2587. ISSN 1819-6608

Maruai, N. M. and Mat Ali, M. S. and Ismail, M. H. and Shaikh Salim, S. A. Z. (2017) Downstream flat plate as the flow-induced vibration enhancer for energy harvesting. JVC/Journal of Vibration and Control . ISSN 1077-5463 (In Press)

Marwoto, Putut (2004) Pembangunan reaktor DC PECVD dan kajian struktur filem tipis karbon amorfus terhidrogen (a-C:H). PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Maseleno, Andino and Sabani, Noraisikin and Huda, Miftachul and Ahmad, Roslee and Jasmi, Kamarul Azmi and Basiron, Bushrah (2018) Demystifying Learning Analytics in Personalised Learning. International Journal of Engineering & Technology, 7 (3). pp. 1124-1129. ISSN 2227-524X

Mashhuri, Ahmad Mujib and Ahmad, Anuar (2008) Development of camera calibration software using bundle adjustment method. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13-15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mashinchi, M. Hadi and Shamsuddin, Siti Mariyam (2009) Three-term fuzzy back-propagation. In: Foundations of Computational Intelligence Volume 1: Learning and Approximation. Studies in Computational Intelligence . Springer, Berlin/ Heidelberg, pp. 143-158. ISBN 978-3-642-01081-1

Mashudi, N. A. and Rossli, S. A. and Ahmad, N. and Mohd. Noor, N. (2021) Comparison on some machine learning techniques in breast cancer classification. In: 2020 IEEE EMBS Conference on Biomedical Engineering and Sciences, IECBES 2020, 1 - 3 March 2021, Virtual, Langkawi Island.

Mashudi, Nurul Amirah and Mad Kaidi, Hazilah and Sarip, Shamsul and Abdul Latiff, Liza (2021) The modelling and simulation of IoT system in healthcare applications. International Journal of Advanced Technology and Engineering Exploration, 8 (74). pp. 167-177. ISSN 2394-5443

Maskor, N. A. and Muhamad, M. and Krauss, S. E. and Mahmood, N. M. N. (2021) Relationship between personal values, work experience and nursing competencies among cancer care nurses in Malaysia. Asian Pacific Journal of Cancer Prevention, 22 (1). ISSN 1513-7368

Maskuriy, R. and Selamat, A. and Ali, K. N. and Maresova, P. and Krejcar, O. and Kuca, K. and Mohd., S. (2020) Man-made disaster prevention using waste management hierarchy and disaster management cycle. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 - 26 November 2019, Putrajaya, Malaysia.

Maskuriy, Raihan and Selamat, Ali and Ali, Kherun Nita and Mahdzir, Akbariah and Maresova, Petra and Krejcar, Ondrej (2021) University spin-off: effective solution on technology transfer in AEC industry for intelligent city transformation. In: 19th International Scientific Conference on Hradec Economic Days, 25 March 2021 - 26 March 2021, Hradec Kralove, Czech Republic.

Maslan, Mohd. Nazmin and Syed Mohamed, Mohd. Syafiq and Zamri, Ruzaidi and Abdullah, Lokman and Mat Ali, Mahasan and Ab. Rashid, Mohd. Zamzuri and Noorazizi, Mohd, Samsuddin (2020) Identification of a piezoelectric compact actuator. In: 2nd Symposium on Intelligent Manufacturing and Mechatronics, Sympo SIMM 2019, 8 July 2019 through 8 July 2019, Melaka, Malaysia.

Masoomzadeh, A. and Zakaria, W. N. W. and Masrom, M. and Khademi, T (2020) Intellectual capital as key asset in iranian automotive industry. Journal of Environmental Treatment Techniques, 8 (1). pp. 429-439. ISSN 2309-1185

Masoomzadeh, A. and Zakaria, W. N. W. and Masrom, M. and Streimikiene, D. and Tavakoli, R. (2019) Organizational innovation factors, capabilities and organizational performance in automotive industry. Montenegrin Journal of Economics, 15 (3). pp. 83-100. ISSN 1800-5845

Masrom, Maslin and Ismail, Zuraini (2008) Evaluation of computer ethics: confirmatory factor models using PROC CALIS. In: SAS Forum 2008 Malaysia, 15 & 16 July 2008, KL Convention Centre, Malaysia.

Masrom, Maslin and Ismail, Zuraini and Hussein, Ramlah (2008) Computer ethics awareness among undergraduate students in Malaysian higher education institutions. Working Paper. University of Canterbury, The Rydges Christchurch, New Zealand. (Submitted)

Masrom, Maslin and Zainon, Othman and Rahiman, Rosdina (2008) Critical success in e-learning : an examination of technological and institutional support factors. International Journal of Cyber Society and Education, 1 (2). pp. 131-142. ISSN 1995-6649

Masrom, M. (2016) E-government, e-surveillance, and ethical issues from Malaysian perspective. In: Ethical Issues and Citizen Rights in the Era of Digital Government Surveillance. IGI Global, pp. 249-263. ISBN 978-146669906-9

Masrom, Maslin and Abdulhussean, Sanaa Abdulkarim (2015) A model for e-healthcare adoption and patient safety. Electronic Journal of Computer Science and Information Technology (EJCSIT), 5 (1). pp. 1-6. ISSN 1985-7721

Masrom, Maslin and Busalim, Abdelsalam H. and Abuhassna, Hassan and Nik Mahmood, Nik Hasnaa (2021) Understanding students’ behavior in online social networks: a systematic literature review. International Journal of Educational Technology in Higher Education, 18 (1). p. 6. ISSN 2365-9440

Masrom, Maslin and Hakemi, Aida (2019) Technical and infrastructural aspects of mobile learning adoption in Iran higher education. International Journal of Internet, Broadcasting and Communication, 11 (1). pp. 1-7. ISSN 2288-4920

Masrom, Maslin and Moomal, Asma (2015) Ict development and its impact on e-business and hrm strategies in the organizations of Pakistan. Journal Of Advanced Management Science, 3 (4). pp. 344-349. ISSN 2168-0787

Masrom, Maslin and Nik Mahmood, Nik Hasnaa and Zainon, Othman and Hooi, Lai Wan and Jamal, Nadia (2012) Information and communication technology issues: a case of Malaysian primary school. ARPN Journal of Science and Technology, 2 (5). pp. 504-511. ISSN 2225-7217

Masrom, Maslin and Saiful Bahry, Farrah Diana and Mohd. Tobi, Siti Noraini and Hamsi, Ahmad Safwan (2015) Cybercrime over internet love scams in Malaysia: a discussion on the theoretical perspectives, connecting factors and keys to the problem. Journal Of Management Research, 7 (2). pp. 169-181. ISSN 1941-899X

Masudi, A. and Harimisa, G. E. and Ghafar, N. A. and Jusoh, N. W. C. (2020) Magnetite-based catalysts for wastewater treatment. Environmental Science and Pollution Research, 27 (5). pp. 4664-4682. ISSN 0944-1344

Masudi, A. and Jusoh, N. W. C. and Jusoh, R. and Jaafar, N. F. and Jalil, A. A. and Firdausi, A. and Hartanto, D. (2020) Equidistant crystal distortion arrangement of copper doped magnetite for paracetamol degradation and optimization with response surface methodology (RSM). Materials Chemistry and Physics, 250 .

Masudi, A. and Jusoh, N. W. C. and Muraza, O. (2020) Opportunities for less-explored zeolitic materials in the syngas-to-olefins pathway over nanoarchitectured catalysts: a mini review. Catalysis Science and Technology, 10 (6). pp. 1582-1596. ISSN 2044-4753

Mat, Ramli (1993) Comparative study of zeolite A synthesis in batch and semibatch reactors. Buletin FKKKSA, 7 (2). pp. 27-33. ISSN 0128-0740

Mat, Ramli (1993) Synthesis and crystallization of zeolite A. Buletin FKKKSA, 7 (1). pp. 50-54. ISSN 0128-0740

Mat, Norizan (2012) Surge arrester condition monitoring using leakage current and thermography techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat, Ramli and Tavare, N. S. (1997) Synthesis of zeolite A in batch and semi-batch reactors. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Mat Ali, Mohamed Sukri and Jalasabri, Jafirdaus and Mohd. Sood, Anwar and Mansor, Shuhaimi and Shaharuddin, Haziqah and Muhamad, Sallehuddin (2018) Wind noise from A-pillar and side view mirror of a realistic generic car model, DriAver. International Journal of Vehicle Noise and Vibration, 14 (1). pp. 38-61. ISSN 1479-1471

Mat Amin, Ismail (2006) Pengecaman wajah menggunakan kaedah graf terhubung. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Ariff, Shahidah (2007) Pengaturcaraan Fortran untuk jurukur. Documentation. FKSG, UTM Skudai, FKSG.

Mat Daud, Azra Munirah (2003) Pengolahan airsisa industri menggunakan mangkin TiO2 dengan tenaga elektrik voltan rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Dzahir, Mohd. Azuwan and Yamamoto, Shin-ichiroh (2020) Inverse modeling of nonlinear artificial muscle using polynomial parameterization and particle swarm optimization. Advances in Materials Science and Engineering, 2020 . pp. 1-15. ISSN 1687-8442

Mat Jusoh @ Hussain, Afifuddin Husairi (2017) A Framework for the diffusion of building information modeling (BIM) adoption strategy for the private client organisation. PhD thesis, Universiti Teknologi Malaysia, UTM Razak School of Engineering and Advance Technology.

Mat Noor, Fazimah (2018) Foam replicated porous 316l stainless steel based on Taguchi method for biomedical applications. PhD thesis, Universiti Teknologi Malaysia.

Mat Rejab, Mazidah and Md. Sarkan, Haslina and Firdaus Azmi, Nurulhuda and Chuprat, Suriayati and Yahya, Yazriwati and Yusop, Othman and Azmi, Azri (2015) Application of product data management at Mimos Bhd. Open International Journal of Informatics (OIJI), 3 (1). pp. 28-40. ISSN 2289-2370

Mat Safri, Norlaili and Tanaka, Masaomi and Murayama, Nobuki and Igasaki, Tomohiko (2003) Effects of visual feedback on coherence between human brain and muscle. In: IEEE EMBS Asian-Pacific Conference on Biomedical Engineering , 20-22 Oct. 2003, Kyoto, Japan.

Mat Saman, Muhamad Zameri and Cheong, Wee Tat (1999) Development and implementation of computer integrated production planning system for job shop company. Jurnal Mekanikal, 1 (7). pp. 1-16. ISSN 0127-3396

Mat Sidek, Abd. Rahim and Sha'ameri, Ahmad Zuri (2007) Comparison analysis of stream cipher algorithms for digital communication. Jurnal Teknologi, 46 (D). pp. 1-16. ISSN 2180-3722

Mat Soom, E. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Mohd. Nor, M. N. K. and Ayob, M. S. and Najafian, G. (2015) Global ultimate strength assessment (GUSA) for lifetime extension of ageing offshore structures. In: Proceedings of the Twenty-fifth (2015) International Ocean and Polar Engineering Conference, 21-26 June 2015, Kona, Big Island, Hawaii, USA.

Mat Sooma, E. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Azman, N. U. and Najafian, G. (2016) Reliability-based design and assessment for lifetime extension of ageing offshore structures. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Mat Yahya, Siti Hafiza and Ismail, Syuhaida (2014) Performance appraisal amongst contractors in construction project in Malaysia. In: Third International Conference on Engineering Business Management (ICEBM 2014), 25-26 August, 2014, Kuala Lumpur, Malaysia.

Mat Zaini, Y. M. and Yuzir, A. (2020) Effects of pharmaceutical load on the effluent quality using sequencing batch reactor. In: 7th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25-26 Nov 2019, Putrajaya, Malaysia.

Mat, Hanapi and Stitt, E.H. and Abdul Mutalib, Mohamed Ibrahim (1989) Large scale preparative electrophoresis equipment: the current state-of-the-art. Proceedings of The Fifth Symposium Of Malaysian Chemical Engineers . pp. 443-458.

Mataram, Agung and Ismail, Ahmad Fauzi and Yuliwati, Erna and Matsuura, Takeshi and Rizal, Setria and Zamheri, A. (2016) Stand-alone water treatment : performance of electrospun nanofibers. Jurnal Teknologi, 78 (12). pp. 103-107. ISSN 0127-9696

Mathew, Sindhu and Zakaria, Zainul Akmar (2015) Pyroligneous acid-the smoky acidic liquid from plant biomass. Applied Microbiology and Biotechnology, 99 (2). pp. 611-622. ISSN 0175-7598

Matsukawa, H. and Kuwabara, K. and Shimada, Y. and Tsuji, T. and Otake, K. (2020) Densities for carbon dioxide/cyclohexane, methylcyclohexane, and ethylbenzene systems. Journal of Chemical Thermodynamics, 142 . ISSN 0021-9614

Matsumoto, Mitsutaka and Chinen, Kenichiro and Jamaludin, Khairur Rijal and Mohd. Yusoff, Badli Shah (2021) Barriers for remanufacturing business in Southeast Asia: The role of governments in circular economy. In: Sustainable Production, Life Cycle Engineering and Management. Springer Science and Business Media Deutschland GmbH, pp. 151-161. ISBN 978-981-15-6778-0

Matsuura, Shohei and Razak, Khamarrul Azahari (2019) Exploring transdisciplinary approaches to facilitate disaster risk reduction. Disaster Prevention and Management: An International Journal, 28 (6). pp. 809-822. ISSN 0965-3562

Matsuzaki, T. and Elfadil, O. and Horiuchi, K. and Shiratsuchi, H. and Mashiko, K. (2019) Embedded controller based learning system for dc motor control. International Journal of Innovative Computing, Information and Control, 15 (3). pp. 997-1007. ISSN 1349-4198

Maxwell, O. and Sunday, J. E. and Oladotun, A. O. and Akinloye, A. S. and Emenike, P. C. and Tenebei, I. T. and Ofuyatan, O. and Sociis, O. T. and Wagira, H. and Mouri, H. (2017) Assessment of dose intake of toxic elements in groundwater samples from Abuja, North Central Nigeria. WIT Transactions on Ecology and the Environment, 216 . pp. 267-275. ISSN 1746-448X

Mazlan, A. A. and Daud, S. M. and Sam, S. M. and Abas, H. and Rasid, S. Z. A. and Yusof, M. F. (2020) Scalability challenges in healthcare blockchain system - a systematic review. IEEE Access, 8 . pp. 23663-23673. ISSN 2169-3536

Mazlan, N. A. and Yahya, W. J. and Ithnin, A. M. and Ahmad, M. A. (2016) The effect of tap water emulsified fuel on exhaust emission of single cylinder compression ignition engine. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Mazlan, N. S. F. and Ahmad Khairudin, N. B. (2016) A molecular dynamics study of Beta-Glucosidase B upon small substrate binding. Journal of Biomolecular Structure and Dynamics, 34 (7). pp. 1486-1494. ISSN 0739-1102

Mazlan, Nurul Aiyshah and Yahya, Wira Jazair and Ithnin, Ahmad Muhsin and Hasannuddin, A. K. and Ramlan, Nur Atiqah and Sugeng, Dhani Avianto and Muhammad Adib, A. R. and Koga, Tsuyoshi and Mamat, Rizalman and Che Sidik, Nor Azwadi (2018) Effects of different water percentages in non-surfactant emulsion fuel on performance and exhaust emissions of a light-duty truck. Journal of Cleaner Production, 179 . pp. 559-566. ISSN 0959-6526

Mazlan, Sulaiman and Abdul Rahman, Hisyam and Yeong, Che Fai and Kader Ibrahim, Babul Salam Ksm and Huq, Muhamad Saif (2020) Kinematic variables for upper limb rehabilitation robot and correlations with clinical scales: A review. Bulletin of Electrical Engineering and Informatics, 9 (1). pp. 75-82. ISSN 2302-9285

Md Piah, Md Afendi and Darus, Ahmad and Hassan, Azman (2004) Effect of ATH filler on the electrical tracking and erosion properties of natural rubber-LLDPE blends under wet contaminated conditions. Journal of Industrial Technology, 13 (1). pp. 27-40. ISSN 0882-6404

Md. Sarip, M. S. and Yamashita, Y. and Morad, N. A. and Che Yunus, M. A. and Abdul Aziz, M. K. (2016) Modeling and optimization of the hot compressed water extraction of palm oil using artificial neural network. Journal of Chemical Engineering of Japan, 49 (7). pp. 614-621. ISSN 0021-9592

Md Yassin, Abu Azam and Ismail, Abdul Razak and Mohammad, Abd. Halim (1993) Evaluation of formation damage caused by drilling fluid in deviated wellbore. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 4-2.

Md Zaki, Nurul Asyikin and Muhammad, Ida Idayu and Md. Salleh, Liza and Khairuddin, Noziena (2007) Drying characteristics of papaya (carica papaya L.) during microwave vacuum treatment. International Journal of Engineering and Technology, 4 (1). pp. 15-21. ISSN 1823-1039

Md. Akhir, Fazrena Nadia and Mohd. Noor, Mohd. Hezmee and Leong, Keith Weng Kit and Nabizadeh, Jamileh A. and Manthey, Helga D. and Sonderegger, Stefan E. and Fung, Jenny Nga Ting and McGirr, Crystal E. and Shiels, Ian A. and Mills, Paul C. and Woodruff, Trent M. and Rolfe, Barbara E. (2021) An immunoregulatory role for complement receptors in Murine Models of breast cancer. Antibodies, 10 (1). pp. 1-12. ISSN 2073-4468

Md. Ariff, Mohd. Shoki and Khalifah, Zainab and Mohamad Sirin, Rosnah and Sulong, Norzarina and Ali, Maimunah and Omar, Noor Abidah and Abdul Rahman, Hamidah (2006) Pembangunan dan pelaksanaan sistem pengurusan kualiti menggunakan model proses untuk Universiti Pendidikan Sultan Idris. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Daud, Ab. Hamid (2010) Response time on traffic signal complaints in the state of Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Md. Ibrahim, N. N. N. and Hashim, A. M. (2021) High sensitivity of deoxyribonucleic acid detection via graphene nanohole/si micro-nanopore structure fabricated by focused ion beam. Materials Letters, 305 . ISSN 0167-577X

Md. Ibrahim, Nik Noor Nabilah and Hashim, Abdul Manaf (2020) Fabrication of si micropore and graphene nanohole structures by focused ion beam. Sensors, 20 (6). p. 1572. ISSN 1424-8220

Md. Noor, Norhazilan and Smith, George H. and Yahaya, Nordin (2007) The weibull time-dependent growth model of marine corrosion in seawater ballast tank. In: Prosiding Kebangsaan Awam'07, 29th - 31st May 2007, Langkawi, Malaysia.

Md. Noor, Norhazilan and Yahaya, Nordin and Mat Din, Mazura and Nor Ozman, Nor Apaziah (2009) Prediction of corroding pipeline remaining life-time using semi-probabilistic approach. Malaysian Journal of Civil Engineering, 21 (2). pp. 204-218. ISSN 1823-7843

Md. Nor, Khalil and Wan Ismail, Wan Khairuzzaman and Bahari, Ahamad Zaidi (2011) A linkage between organizational culture and knowledge management. A model development. Project Report. Faculty of Management and Human Resource Development, Skudai, Johor. (Unpublished)

Md. Nor, Norzaliza and Sheikh Hussain, Siti Hadrina and Ismail, Kamarulafizam and A. Harris, Arief Ruhullah and Wan Abdul Aziz, Wan Siti Nur Aminah and Shaikh Salleh, Sheikh Hussain and Samdin, Siti Balqis and Mohd. Noor, Alias (2015) A development of education technology for smart learning program. In: 9th International Technology, Education and Development Conference, 2-4 March, 2015, Spain.

Md. Sarip, Mohd. Sharizan and Morad, Noor Azian and Yamashita, Yoshiyuki and Ahmad Razali, Muhamad Nur Iman (2015) Design and modeling of hot compressed water extraction process for palm oil. In: 10th Asian Control Conference: Emerging Control Techniques for a Sustainable World, ASCC 2015, 31 May-3 Julai, 2015, Kota Kinabalu, Malaysia.

Md. Sarkan, Haslina (2011) Epidemiologic approach in computer viruses : research survey. In: 15th International Symposium On Health Information Management Research (ISHIMR 2011).

Md. Sarkan, Haslina and Kama, Nazri and Mohd. Yusop, Othman and Azmi, Azri (2018) A methodology for improving the accuracy of ongoing software development effort prediction. Open International Journal Of Informatics (OIJI), 6 (3). pp. 32-42. ISSN 2289-2370

Md. Shamsudin, Nurshamshida (2018) Training design, development and evaluation for occupational safety and health hazard identification using virtual reality. PhD thesis, Universiti Teknologi Malaysia.

Md. Som, Zainal Abidin (2001) The adoption and modelling of non-geodetic observation data for the purpose of deformation analysis. Project Report. UTM. (Unpublished)

Md. Som, Zainal Abidin (2005) Software development for deformation detection using geodetic methods. Project Report. UTM. (Unpublished)

Md. Yassin, Abu Azam (1987) Drilling cutting removal in inclined anuli - A review. Buletin FKKKSA . pp. 22-30. ISSN 0128-0740

Md. Yassin, Abu Azam (1988) Legislation on oil pollution prevention and control during petroleum production. Buletin FKKKSA, 2 (1). pp. 29-35. ISSN 0128-0740

Md. Yassin, Abu Azam (1988) Formation damage during drilling and completion practices - a review. Buletin FKKKSA, 1 (2). pp. 41-50. ISSN 0128-0740

Md. Yassin, Abu Azam (1988) Skop penyelidikan di Jabatan Kejuruteraan Petroleum. Buletin FKKKSA, 1 (2). pp. 9-17. ISSN 0128-0740

Md. Yassin, Abu Azam and Kamis, Azmi and Abdullah, Mohammad Omar (1991) Palm oil diesel as a base fluid in formulating oil based drilling fluid. In: Kertas Kerja Sempena Seminar Penilaian Projek Pennyelidikan Di Bawah Mekanisma IRPA Dalam Rancangan Malaysia Kelima(1988-1990), UTM Johor Bahru.

Md. Yassin, Abu Azam and Mohd. Arshad, Azmi and Ismail, Issham (1997) Well completion practices. In: Well completion practices. UTM Publisher, Skudai, Johor Bahru, Malaysia, pp. 1-31.

Md. Yusoff, Nelidya and Yao, Lau Kuen and Sulaiman, Abdul Hadi and Mohd. Yusoff, Norita and Mahdi, Mohd. Adzir (2021) Stable dual-wavelength laser incorporating polarization-maintaining erbium-doped fiber. Optics and Laser Technology, 135 . p. 106707. ISSN 0030-3992

Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and Soad, Muhammad Hafiz (2015) Aetiological classification of tremor. In: ICRIL International Conference of Innovation in Science and Technology, 20 Apr, 2015, Kuala Lumpur, Malaysia.

Md. Zain, M. Z. and Tokhi, M. O. and Mohamed, Z. (2006) Performance of hybrid learning control with input shaping for input tracking and vibration suppression of a flexible manipulator. Jurnal Teknologi A (44A). pp. 41-64. ISSN 0127-9696

Md. Zainudin, Noorfaizah and Tasnim, Rahayu (2020) Business practices to minimize safety risks: A case study of two adventure tourism businesses in Malaysia. Business Management And Strategy, 11 (1). pp. 40-54. ISSN 2157-6068

Md. Zaki, Nurul Asyikin and Md. Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of microwave treatment on moisture content and vitamin C retention of papaya. In: First International Symposium on Papaya, 22-24 November 2005, Genting Highlands, Malaysia.

Md. Zaki, Nurul Asyikin and Mohd. Darwi, Lizawati and Md. Salleh, Liza and Muhamad, Ida Idayu (2005) Effect of drying parameters and geometry on papaya quality. In: KUSTEM 4th Annual Seminar On Sustainbility Science And Management 2005, 2-3 May 2005, Primula Beach Resort, Kuala Terengganu.

Md. Zubir, Ainaa Amirah and M. P., Khairunnisa and Surib, Nur Atiqah and J., Nor Ruwaida and Md. Ali, Abd. Halim and Rashid, M. (2020) Electrospinning of PLA with DMF: Effect of polymer concentration on the bead diameter of the electrospun fibre. In: 26th Regional Symposium on Chemical Engineering, RSCE 2019, 30 - 1 November 2019, Kuala Lumpur, Malaysia.

Mehmood, Ahsan and Ahmed Khan, Fahad Saleem and Mubarak, Nabisab Mujawar and Tan, Yie Hua and Karri, Rama Rao and Mohammad Khalid, Mohammad Khalid and Walvekar, Rashmi and Abdullah, Ezzat Chan and Nizamuddin, Sabzoi and Mazari, Shaukat Ali (2021) Magnetic nanocomposites for sustainable water purification—a comprehensive review. Environmental Science and Pollution Research, 28 (16). pp. 19563-19588. ISSN 0944-1344

Mehmood, Gulzar and Khan, Muhammad Sohail and Abdul Waheed, Abdul Waheed and Zareei, Mahdi and Muhammad Fayaz, Muhammad Fayaz and Sadad, Tariq and Kama, Nazri and Azmi, Azri (2021) An efficient and secure session key management scheme in wireless sensor network. Complexity, 2021 . p. 6577492. ISSN 1076-2787

Memari, A. and Ahmad, R. and Rahim, A. R. A. and Hassan, A. (2018) Optimizing a Just-In-Time logistics network problem under fuzzy supply and demand: two parameter-tuned metaheuristics algorithms. Neural Computing and Applications, 30 (10). pp. 3221-3233. ISSN 0941-0643

Memari, Ashkan and Ahmad, Robiah and Abdul Rahim, Abd. Rahman and Jokar, Mohammad Reza Akbari (2018) An optimization study of a palm oil-based regional bio-energy supply chain under carbon pricing and trading policies. Clean Technologies And Environmental Policy, 20 (1). pp. 113-125. ISSN 1618-954X

Memon, M. and Rahim, A. and Eteng, A. (2016) Wireless power transfer in near-field communication using a current-controlled multi loops with a loaded capacitance. Microwave and Optical Technology Letters, 58 (10). pp. 2472-2476. ISSN 0895-2477

Memon, Ruhal Pervez and Achekzai, Lemar and Mohd. Sam, Abdul Rahman and Abdul Awal, A. S. M. and Memon, Uroosa (2018) Performance of sawdust concrete at elevated temperature. Jurnal Teknologi, 80 (1). pp. 165-171. ISSN 0127-9696

Merdhah, Amer Badr and Mohd Yassin, Abu Azam (2008) Low-sulfate seawater injection into oil reservoir to avoid scaling problem. Journal of Applied Sciences, 8 (7). pp. 1169-1178. ISSN 1812-5654

Merdhah, Amer Badr and Mohd Yassin, Abu Azam (2007) Study of scale formation in oil reservoir during water injection-A review. In: Marine Science & Technology Seminar 2007, 22nd-23rd Februrary 2007, Istana Hotel, Kuala Lumpur.

Merdhah, Amer Badr and Mohd. Yassin, Abu Azam and Ahmed Muherei, Mazen (2010) Laboratory and prediction of barium sulfate scaling at high-barium formation water. Journal of Petroleum Science and Engineering, 70 (1-2). 79 - 88. ISSN 0920-4105

Meshginqalam, B. and Toloue, H. and Ahmadi, M. T. and Sabatyan, A. and Centeno, A. and Ismail, R. (2016) Graphene embedded surface plasmon resonance based sensor prediction model. Optical and Quantum Electronics, 48 (6). ISSN 0306-8919

Meynagh, Mahdi Moharrami (2012) The effect of atticventilation on energy optimization in an existing green building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mikami, O. and Fujikawa, C. (2016) 3-Beam laser Doppler velocimeter for 3-D velocity measurement. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Kuching, Sarawak; Malaysia.

Mikami, O. and Fujikawa, C. (2016) Laser diode Doppler velocimeter with 3-beams and self-mixing effect enabling 3-dimensional velocity measurement. In: Optical Sensing and Detection IV, 3-7 April 2016, Brussels, Belgium.

Mikami, Osamu and Ambran, Sumiaty and Fujikawa, Chiemi and Ahmad, Fauzan and Ibrahim, Amalina Athira (2018) Uv-curable resin microlens on patterned substrate for optical interconnect. Plasma Application and Hybrid Functionally Materials, 27 . pp. 41-42. ISSN 1340-9557

Ming, J. T. C. and Noor, N. M. and Rue, N. C. and Rijal, O. M. and Kassim, R. M. and Yunus, A. (2016) Performance evaluation system for automated lung segmentation system using HRCT thorax images. In: IEEE Student Symposium in Biomedical Engineering and Sciences, ISSBES 2015, 4 Nov 2015, Selangor, Malaysia.

Minghat, Asnul Dahar and Kok, Wee Yunn and Mustakim, Siti Salina and Subari, Kamalularifin (2019) The infusion of creativity among science students’ learner at Lestari Kemajuan Education. Journal Online Jaringan Pengajian Seni Bina (JOJAPS), 14 . pp. 103-108. ISSN 2504-8457

Minghat, Asnul Dahar and Mustakim, Siti Salina and Ana A., Ana A. and Kassymova, G. K. and Suparman, S. (2020) Measuring technical and vocational education and training (TVET) teacher’s technical competency and the development of programme-specific-directory. International Journal of Psychosocial Rehabilitation, 24 (8). pp. 3730-3735. ISSN 1475-7192

Minoru, Yamada and Ambran, Sumiaty and Kazuki, Makinoahima and Alexander William, Setiawan Putra (2015) An improved model for noise analysis in semiconductor optical amplifier. In: Malaysia-Japan Joint International Conference 2015, 13-15 Nov, 2015, Japan.

Miskon, Shahrul Affendi and Hairudin, Norhazah and Safar, Jimaain @Ajmain (2018) Sains Teknologi Islam dalam Pembelajaran. In: Seminar Tamadun Islam 2018, 17 Ogos 2018, Bilik Kuliah 6, Blok N28, UTM. (Unpublished)

Misni, F. and Nik Mahmood, N. H. and Jamil, R. (2019) The effect of curriculum design on the employability competency of Malaysian graduates. Management Science Letters, 10 (4). pp. 909-914. ISSN 1923-9335

Misran, Aishah (2012) Performance of free water surface constructed wetland pretreated with magnetic field exposure in sewage treatment. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Miyabayashi, K. and Miyake, M. (2017) Metal-Support Interactions of Platinum Nanoparticles Modified with Pyrene-functionalized Alkylamine and Improved Electrocatalytic Activity of Oxygen Reduction Reaction. CHEMISTRY LETTERS, 46 (5). pp. 707-710. ISSN 0366-7022

Miyabayashi, Keiko and Ishihara, Kenta and Joshi, Prerna and Shen, Zhongrong and Miyake, Mikio (2018) Aromatic Ring Size Effect of a Surface Modification Agent on Platinum Nanoparticle Electrocatalysts for Oxygen Reduction Reaction. Electrocatalysis, 9 (4). pp. 486-494. ISSN 1868-2529

Mizutani, A. and Hamano, F. and Nakamura, D. and Goto, T. and Aid, S. R. and Ikenoue, H. (2021) Size effects of poly-si formed by laser annealing with periodic intensity distribution on the tft characteristics. IEEE Journal of the Electron Devices Society, 9 . ISSN 2168-6734

Mobark, M. and Chuprat, S. and Mantoro, T. and Azizan, A. (2017) Utilization of mobile phone sensors for complex human activity recognition. Advanced Science Letters, 23 (6). pp. 5466-5471. ISSN 1936-6612

Moghadam, Ali Mokhtari (2013) Optimization of pipe spool fabrication shop scheduling using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moghaddam, F. F. and Majd, A. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) A dynamic classification index to enhance data protection procedures in cloud-based environments. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Moghaddam, F. F. and Vala, M. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) A reliable data protection model based on re-encryption concepts in cloud environments. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Moghbel, Mehrdad and Ooi, Chia Yee and Ismail, Nordinah and Hau, Yuan Wen and Memari, Nogol (2020) A review of breast boundary and pectoral muscle segmentation methods in computer-aided detection/diagnosis of breast mammography. Artificial Intelligence Review, 53 (3). pp. 1873-1918. ISSN 0269-2821

Mohamad, Noor Azmi and Wan Ismail, Wan Faridah Akmal and Omain, Siti Zaleha (2001) Ciri Kerja Dan Prestasi Profesional Teknologi Maklumat Sektor Awam Malaysia. Jurnal Teknologi E (35E). pp. 11-20. ISSN 0127-9696

Mohamad, Radziah and Abang Jawawi, Dayang Norhayati and Deris, Safaai and Mamat, Rosbi (2001) Formal specification of a wall-climbing robot using Z-A case study of small-scale embedded hard real-time system. Jurnal Teknologi D (34D). pp. 25-40. ISSN 0127-9696

Mohamad, Ahmad Tajuddin and Jesbains, Kaur and Che Sidik, Nor Azwadi and Rahman, Saidur (2018) Nanoparticles: A review on their synthesis, characterization and physicochemical properties for energy technology industry. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 1-10. ISSN 2289-7879

Mohamad, Alias and A. Rahman, Khairul Azlan (2008) WiMAX coverage in Malaysia. In: Wireless Communication Technology In Malaysia. Penerbit UTM, Johor, pp. 102-116. ISBN 978-983-52-0656-6

Mohamad, Alias and Mawari, Hamzah (2008) WCDMA in Malaysia. In: Wireless Communication Technology In Malaysia. Penerbit UTM, Johor, pp. 96-101. ISBN 978-983-52-0656-6

Mohamad, Khairul Azmi and Othman, Nooraini and Jaapar, Ghazali (2020) Preface to Islamic political psychology: Siyasah syariyyah meets psychology. Journal Of Politics And Law, 13 (3). pp. 38-42. ISSN 1913-9055

Mohamad, Mohamad Ibrahim and Zawawi, Mardhiah and Nekooie, M. A. (2009) Implementing industrialised building system (IBS) in Malaysia: acceptance and awareness level, problems and strategies. Malaysian Journal of Civil Engineering, 21 (2). pp. 219-234. ISSN 1823-7843

Mohamad, N. and Mazlan, S. A. and Ubaidillah, Ubaidillah (2016) Effect of carbonyl iron particles composition on the physical characteristics of MR grease. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Mohamad, N. and Ooi, C. Y. and Ismail, N. and Teh, J. (2016) SVA checker generator for FPGA-based verification platform. In: 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, 22 May 2016 through 25 May 2016, Canada.

Mohamad, N. A. and Nasef, M. M. and Nia, P. M. and Zubair, N. A. and Ahmad, A. and Abdullah, T. A. T. and Ali, R. R. (2021) Tetraethylenepentamine-containing adsorbent with optimized amination efficiency based on grafted polyolefin microfibrous substrate for co2 adsorption. Arabian Journal of Chemistry, 14 (4). ISSN 1878-5352

Mohamad, N. A. and Zubair, N. A. and Lotf, E. A. and Nasef, M. M. and Ahmad, A. and Ali, R. R. and Abdullah, T. A. T. and Ting, T. M. (2020) Effect of monoethanolamine concentration on CO2 capture by poly (chloromethyl styrene) grafted fibrous adsorbent. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Mohamad, Norhidayah (2006) Amalan dan prestasi dalam perolehan elektronik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohamad, Nurhana (2012) Numerical simulation of fluid-structure interaction in stenotic artery disease considering mass transfer using adina CFD package. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad, Nurita and Ooi, Chia Yee and Teh, Jwing and Paraman, Norlina and Hassan, Hasliza and Ismail, Nordinah (2020) FPGA-Assisted assertion-based verification platform. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 12 (1). pp. 15-24. ISSN 2180-1843

Mohamad , Nazatul Shima (2004) Faktor-faktor yang mempengaruhi keberkesanan sistem Job Management System (JMS) di pusat Operasi SAJ Holdings. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Abdullah, Nazirah and Rambat, Shuib and Mohd. Yatim, Mohammad Hafiz and Omar, Abdullah Hisam and Muhamad Yatim, Muhamad Nur (2020) Systematic literature review of role of applied geomatics in mapping and tracking Corona Virus. International Journal Of Integrated Engineering, 12 (8). pp. 251-256. ISSN 2229-838X

Mohamad Fuzi, Siti Fatimah Zaharah and Md. Illias, Rosli (2007) Cloning of xylanase gene from Trichoderma reesei ATCC 58350. In: The 32nd Annual Conference Of The Malaysian Society For Biochemistry And Molecular Biology, 5th-6th September 2007, Eastin Hotel, Petaling Jaya.

Mohamad Lazim, Mazidatul Ashiqeen Balqiah (2012) Treatment of final discharge palm oil mill effluent (POME) using Biofilm-Coated macrocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mohamad Nor, M. H. and Ismail, Z. H. and Ahmad, M. A. (2016) Broadcast control of multi-agent systems for assembling at unspecified point with collision avoidance. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 75-79. ISSN 2180-1843

Mohamad Rashid, N. N. and Ahmad Junaidi, N. H. and Rahmah Aid, S. (2019) Interface damage of protective layer in TEM lamella preparation for highly doped ge substrate. In: 2018 4th International Conference on Smart Material Research, ICSMR 2018, 16-18 Nov 2018, Sydney, Australia.

Mohamad Rozi, Rusesaliza (2003) Space time block coding using phase shift keying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Yatim, Norfadzliah (2012) Predictioin of fruit quality using near-infrared VIA NARX model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Yusoff, Izham and Abdul Rahman, Alias and Katimon, Ayob and Ismail, Wan Ruslan (2008) Data modelling for GIS based saturation excess overland flow. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13 - 15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mohamad Yusoff, Izham and Abdul Rahman, Alias and Katimon, Ayob and Ismail, Wan Ruslan (2008) Influence of georeference for GIS based saturation excess overland flow modelling. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 313-334. ISBN 978-983-52-0584-22

Mohamad Zulkifli, Siti Nur Awanis and Abdul Rahman, Alias (2008) Managing 3D spatial objects using geo DBMS and microstation geographics. In: Advances toward 3D GIS. Penerbit UTM, Skudai, Johor Bahru, pp. 55-64. ISBN 978-983-52-0584-5

Mohamad Zulkifli, Siti Nur Awanis and Abdul Rahman, Alias (2008) Modelling and managing 3D spatial objects. In: 7th International Symposium & Exhibition on Geoinformation (ISG 2008), 13 - 15 October 2008, Putra World Trade Centre(PWTC), Kuala Lumpur, Malaysia.

Mohamad, Mazura (2004) Kajian terhadap keberkesanan sistem pengesanan imej cek dan hubungannya dengan kualiti kerja : Satu Kajian kes keatas pekerja SPICK KL, RHB Bank Berhad. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Mohamed, Maketab (2003) Measurements of sediment oxygen demand (SOD)"in-situ" measuring chamber and its application for the stream water quality modeling and aquaculture management. In: Simposium Kimia Analisis Kebangsaan Ke-16 (SKAM-16), 9-11 Sept 2003, Holiday Inn Resort, Damai Lagoon. Kuching. (Submitted)

Mohamed, Maketab and Yusop, Zulkifli (2001) Design of sediment oxygen demand (SOD) 'in-situ' measuring chamber and its application in several rivers. In: National Seminar on Environmental Management 2001 Current Development and Future Planning, 14-15 August 2001 , Universiti Kebangsaan Malaysia, Bangi, Selangor. (Submitted)

Mohamed, A. and Zaki, S. A. and Shirakashi, M. and Ali, M. S. M. and Samsudin, M. Z. and Mohammad, A. F. (2020) Experimental investigation of the effect of a downstream square plate on vortex-induced vibration and galloping of a square cylinder. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (1). pp. 98-113. ISSN 2289-7879

Mohamed, A. M. and Osman, M. H. and Smaoui, H. and Mohd. Ariffin, M. A. (2017) Permeability and tensile strength of concrete with Arabic gum biopolymer. Advances in Civil Engineering, 2017 . ISSN 1687-8086

Mohamed, Azhar and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Shirakashi, Masataka and Mat Ali, Mohamed Sukri and Samsudin, Muhammad Zulfahmi (2021) Experimental investigation on vortex-induced vibration and galloping of rectangular cylinders of varying side ratios with a downstream square plate. Journal of Wind Engineering and Industrial Aerodynamics, 211 . p. 104563. ISSN 0167-6105

Mohamed, H. and Irawati, N. and Ahmad, F. and Ibrahim, M. H. and Ambran, S. and Rahman, M. A. A. and Harun, S. W. (2017) Optical humidity sensor based on tapered fiber with multi-walled carbon nanotubes slurry. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 97-103. ISSN 2502-4752

Mohamed, Maketab (1992) Conflict between industrial growth and water supply preservation: case studies in Malaysia. Prosiding Simposium Sumber Alam Kebangsaan Pertama, 2 . pp. 137-166.

Mohamed, Maketab and Jab, Ahmad Tajudin (1993) Penilaian tahap trihalometana dalam air minum: keupayaan menyingkirkannya melalui kaedah rawatan biasa. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . pp. 1-5.

Mohamed, Mohamad Azuwa Zuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd. Mutalib, Muhazri and Jamil, Siti Munira Unira (2015) Feasibility of recycled newspaper as cellulose source for regenerated cellulose membrane fabrication. Journal of Applied Polymer Science, 132 (43). ISSN 0021-8995

Mohamed, Muna (2003) Pengolahan air larut lesap melalui tanah bencah buatan aliran subpermukaan dengan "Scirpus globulosus" dan "Ericaulon sexangulare" bagi penyingkiran logam berat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, N. and Sam, S. M. and Ngajikin, N. H. (2016) Power fading effects in millimeter-wave radio over fiber (RoF) link. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Mohamed, Zaharuddin and A, Saeed (2007) Modelling of a two link flexible manipulator. In: Australasian univ. power engineering conference, Perth, Australia.

Mohamed, Zainai and Radin Salim, Kamilah and Haron, Habibah @ Norehan and Ali, Rosmah and Abdullah, Morina (2015) Challenges in implementing engineering technology education in Malaysia. The Asian Journal Of Technology Management, 8 (1). pp. 1-8. ISSN 1978-6956

Mohamed Abdul Ghani, N. Afeefah (2011) The effectiveness of RFID in managing logistics activities : case study : Johor Port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed Amin, Amli and Ismail, Syuhaida and Mohd Arof, Khairul Zahreen (2019) Current practice of coal discharging operation in Malaysian port. Journal of Management, Economics, and Industrial Organization, 3 (1). pp. 18-24. ISSN 2521-7054

Mohamed Aris, N. A. and Fathi, M. S. and Harun, A. N. and Mohamed, Z. (2020) High potential of affordable housing supply by using industrialised building system in Selangor. In: 2nd International Conference on Civil and Environmental Engineering, CENVIRON 2019, 20 November 2019 - 21 November 2019, Langkawi, Kedah, Malaysia.

Mohamed Aris, Nur Arzwin and Fathi, Mohamad Syazli and Harun, Aizul Nahar and Mohamed, Zainai (2020) Spatial pattern of affordability and overhang in Selangor. In: 10th IGRSM International Conference and Exhibition on Geospatial and Remote, IGRSM 2020, 20 - 21 October 2020, Kuala Lumpur, Virtual.

Mohamed Baqutayan, Shadiya and Mohammed Bagotayan, Sumaya and Hussin, Hafiz and Nyirob, Boniface Basin and Al Balushi, Faisal Ali (2020) Is child labor an issue today? Factors and policy-related. The Journal of Social Sciences Research, 6 (9). pp. 826-837. ISSN 2411-9458

Mohamed Ibrahim, Mahir Hassan and Mahmoud, Abdelgadir and Mat Ali, Roslizar (2020) Factors affecting systems engineering complexity during developmental phase: systems practitioners, developers, and researchers' perspectives. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences, 8 (6). pp. 43-58. ISSN 2349-7300

Mohamed Isa, E. D. and Che Jusoh, N. W. and Hazan, R. and Shameli, K. (2020) Pullulan mediated zinc oxide microparticles: Effect of synthesis temperature. In: 8th Conference on Emerging Energy and Process Technology 2019, CONCEPT 2019, 27 - 28 November 2019, Kuala Lumpur, Malaysia.

Mohamed Isa, E. D. and Shameli, K. and Ch'ng, H. J. and Che Jusoh, N. W. and Hazan, R. (2021) Photocatalytic degradation of selected pharmaceuticals using green fabricated zinc oxide nanoparticles. Advanced Powder Technology, 32 (7). pp. 2398-2409. ISSN 0921-8831

Mohamed Mahmoud, Abdelgadir and Ahmed, Omer Mohammed Osman Said (2018) Managing risks during strategy implementation, literature review. International Journal of Innovative Research in Engineering & Multidisciplinary Physical Sciences (IJIRMPS), 6 (6). pp. 1-13. ISSN 2349 - 7300

Mohamed Nasir, Mohamed Nuruddin and Buang, Nor Aziah and Ismail, Ahmad Fauzi (2005) CCVD synthesis of carbon nanotubes (CNTs) using MgO and CaCO3 supports. In: The XXII Regional Conference on Solid State Science & Technology (RCSST' 05), 18-21 Dec 2005, Kuantan, Pahang.

Mohamed Saaid, Muhammad Faiz and Ibrahim, Ismail and Sudin, Shahdan and Mohamad, Mohd. Saberi and Md. Yusof, Zulkifli and Ahmed Mukred, Jameel Abdulla and Khalil, Kamal and Ibrahim, Zuwairie and Watada, Junzo (2012) Automation of DNA computing readout method based on real-time PCR implemented on DNA engine opticon 2 system. International Journal of Innovative Computing, Information and Control, 8 (3 A). pp. 1907-1916. ISSN 1349-4198

Mohamed Saeed, Somia Alfatih and Leong, Mohd. Salman @ Yew Mun and Lim, Meng Hee (2015) Definition of engineering asset management: a review. In: Applied Mechanics and Materials, 1-4 Dec, 2015, Batu Pahat, Johor.

Mohamed Saleh Ba Qutayan, Shadiya and Ariffin, Aini Suzana and Raji, Fauziah (2018) Affordable housing policy: issues and challenges among middle income groups. Journal of Consumer Research and Resource Center (CRRC CONSUMER REVIEW), 6 (6). pp. 21-28. ISSN 2180-2815

Mohamed Saleh Ba Qutayan, Shadiya and Mohd. Mahdzir, Akbariah and Ariffin, Aini Suzana and Ismail A. Mohsin, Magda (2018) The psychology of giving behavior in Islam. Sociology International Journal, 2 (2). pp. 88-92. ISSN 2576-4470

Mohamed Saleh Baqutayan, Shadiya (2014) The psychological distress and coping mechanisms among intersexed individuals. Annual Research & Review in Biology, 4 (19). pp. 2910-2919. ISSN 2231-4776

Mohamed Yusof, Nor Ashikin (2015) Legal policy implication in industrial application terminology as second patentability requirement on biotechnological inventions. Journal Of Science, Technology And Innovation Policy, 1 (1). pp. 94-121.

Mohamed, Maketab (2001) QUAL2E water quality model calibration and validation methods for Sungai Selangor. In: National Workshop on Ecological and Environment Modeling (ECOMOD 2001), September 3-4, 2001, Universiti Sains Malaysia. (Submitted)

Mohamed, Maketab and Jab, Ahmad Tajudin (1992) The assesment of trihalomethane levels in drinking water. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli . I-9.

Mohammad, Abu Bakar (2011) Performance analysis of DCO OFDM and DCO WOFDM systems in MMF optical links. In: Proceedings of 2011 IEEE Pacific Rim Conference on Communications, Computers and Signal Processing, 23-26 Aug. 2011, Victoria, BC, Canada.

Mohammad, Ahmad Faiz (2015) Numerical simulation of wind pressure distribution in urban buildings of random staggered arrays. Masters thesis, Malaysia-Japan International Institute of Technology.

Mohammad, Ahmad Faiz and Ikegaya, Naoki and Hikizu, Ryo and Sheikh Ahmad Zaki, Sheikh Ahmad Zaki (2021) Turbulence effect of urban-canopy flow on indoor velocity fields under sheltered and cross-ventilation conditions. Sustainability (Switzerland), 13 (2). pp. 1-11. ISSN 2071-1050

Mohammad, Ahmad Khir (2014) Measurement and improvement of organisational performance using model of performance analysis. PhD thesis, Universiti Teknologi Malaysia, Razak School in Engineering and Advanced Technology.

Mohammad, M. and Muhamad Said, M. F. and Khairuddin, M. H. and A. Kadir, M. K. and Dahlan, M. A. A. and Zaw, T. (2020) Complex geometry automotive muffler sound transmission loss measurement by experimental method and 1D simulation correlation. In: Sustainable and Integrated Engineering International Conference 2019 (SIE 2019), 8 - 9 December 2019, Putrajaya, Malaysia.

Mohammad, Mohammad Tahir Sabit and Mar Iman, Abdul Hamid and Omar, Ismail (2005) An ideal financial mechanism for the development of Waqf properties in Malaysia. Project Report. UTM. (Unpublished)

Mohammad, Roslina and Amrin, Astuty and Muhamad, Sallehuddin (2015) Theoretical of dynamic loading against water-filled simply supported pipes. Jurnal Teknologi, 75 (11). pp. 143-150. ISSN 0127-9696

Mohammad, T. A. and Mohd Noor, M. J. M. and Ghazali, A. H. (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317.

Mohammad Ghanbari, Mohammad Ghanbari (2015) Exploring the potential of nanofillers for advanced thin film nanocomposite forward osmosis membranes fabrication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Mohammad Haniff, Muhammad Aniq Shazni and Zainal Ariffin, Nur Hamizah and Ooi, Poh Choon and Mohd. Razip Wee, Mohd. Farhanulhakim and Mohamed, Mohd. Ambri and Hamzah, Azrul Azlan and Syono, Mohd. Ismahadi and Hashim, Abdul Manaf (2021) Practical route for the low-temperature growth of large-area bilayer graphene on polycrystalline nickel by cold-wall chemical vapor deposition. ACS Omega, 6 (18). pp. 12143-12154. ISSN 2470-1343

Mohammad Pourtousi, Mohammad Pourtousi (2012) Simulation of particle motion in incompressible fluid by lattice boltzmann MRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Razi, Mohd. Adib (2003) Pengurusan dan penentuan tahap kebocoran di dalam sistem bekalan air : kajian kes : Batu Pahat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad, A. F. and Zaki, S. A. and Hagishima, A. and Ali, M. S. M. (2015) Determination of aerodynamic parameters of urban surfaces: methods and results revisited. Theoretical And Applied Climatology, 122 (42067). pp. 635-649. ISSN 0177-798X

Mohammadi, Kasra and Shamshirband, Shahaboddin and Por, LipYee and Petkovic, Dalibor and Zamani, Mazdak and Ch., Sudheer (2015) Predicting the wind power density based upon extreme learning machine. Eenergy, 86 . pp. 232-239. ISSN 0360-5442

Mohammed, Badiea Abdulkarem and Mohammed Senan, Ebrahim and Rassem, Taha H. and Makbol, Nasrin M. and Alanazi, Adwan Alownie and Al-Mekhlafi, Zeyad Ghaleb and Almurayziq, Tariq S. and A. Ghaleb, Fuad (2021) Multi-method analysis of medical records and MRI images for early diagnosis of dementia and alzheimer’s disease based on deep learning and hybrid methods. Electronics (Switzerland), 10 (22). pp. 1-20. ISSN 2079-9292

Mohammed, Nurfathiah (2013) Mass transfer to blood flowing through arterial stenosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohammed Al-Bared, Mohammed Ali and Marto, Aminaton and Latifi, Nima (2018) Utilization of recycled tiles and tyres in stabilization of soils and production of construction materials – a state-of-the-art review. KSCE Journal of Civil Engineering, 22 (10). pp. 3860-3874. ISSN 1226-7988

Mohammed Al-Bared, Mohammed Ali and Marto, Aminaton and Latifi, Nima and Horpibulsuk, Suksun (2018) Sustainable improvement of marine clay using recycled blended tiles. Geotechnical and Geological Engineering, 36 (5). pp. 3135-3147. ISSN 0960-3182

Mohammed Al-Haimi, Basheer Mohammed (2013) E-government service model in improving e-services for Ministry of Higher Education and Scientific Research in Yemen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohammed Humaid Alwaili, Salim (2007) Image-based object detection and identification. Masters thesis, Universiti Teknologi Malaysia, Faculty Geoinformation Science and Engineering.

Mohammed Shuaib, Mohammed Shuaib and Alam, Shadab and Mohd. Daud, Salwani (2021) Improving the authenticity of real estate land transaction data using blockchain-based security scheme. In: 2nd International Conference on Advances in Cyber Security, ACeS 2020, 8 - 9 December 2020, Penang, Malaysia.

Mohammed Shuaib, Mohammed Shuaib and Mohd. Daud, Salwani and Alam, Shadab and Khan, Wazir Zada (2020) Blockchain-based framework for secure and reliable land registry system. Telkomnika (Telecommunication Computing Electronics and Control), 18 (5). pp. 2560-2571. ISSN 1693-6930

Mohammed Yasin, Norazlina and Mohd. Osman, Mohd. Hassan (2015) University spin-off for economic development in Malaysian universities. International Journal of Economics and Financial Issues, 5 . pp. 135-138. ISSN 2164-4138

Mohammed, Miswan @ Abdul Hakim (2005) Pembentukan kerangka kerja amalan terbaik bagi pengurusan harta tanah pihak berkuasa tempatan (PBT). Project Report. UTM. (Unpublished)

Mohd Azmi, Mohamad Rafiuddin and Kamalanathan, Sasikumar and Safar,, Ajmain @ Jimaain (2019) Media Sosial dan Generasi Muda Menurut Islam. In: Seminar Sains Teknologi dan Manusia 2019 (SSTM’19), 15hb. Disember 2019, DP3, N29, Fakulti Kejuteraan Kimia dan Tenaga, UTM. (Unpublished)

Mohd Azoddein, Abd Aziz and Saidi, Hamdani (1994) Penentuan parameter teori erapan mod duaan (dual sorption theory) untuk gas N2. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Mohd Hasbullah, Mohd Hasbullah and Hassan, Azman (2005) Enhancing the toughness of talc filled polypropylene - the application of ethylene propylene rubber as impact modifier. Buletin Kimia, 21 (1&2). pp. 11-17. ISSN 0127-8711

Mohd Izhar, M. A. and Babar, Z. and Nguyen, H. V. and Botsinis, P. and Alanis, D. and Chandra, D. and Ng, S. X. and Hanzo, L. (2018) Quantum turbo decoding for quantum channels exhibiting memory. IEEE Access, 6 . pp. 12369-12381. ISSN 2169-3536

Mohd Nawawi, Mohd Ghazali and Hassan, Hashim and Jalil , Abdul Rahim (2003) Modification of chitosan-based membranes using zeolite for pervaporation separation of isopropanol-water mixtures. Proceedings of International Conference On Chemical and Bioprocess Engineering . pp. 87-91.

Mohd Nawawi, Mohd Ghazali and Hassan, Hashim and Tan, Soon Huat (2001) Azeotropic separation of isopropanol-water mixtures by pervaporation using a locally-produced chitosan-based membrane. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 553-560.

Mohd Nawawi, Mohd Ghazali and Tan, Soon Huat and Hassan, Hashim (2001) Pervaporation separation of isopropanol-water mixtures using chitosan based membranes. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 115-120.

Mohd Yunus, Mohd Yusri and Ali, Mohamad Wijayanuddin (2001) Hazard identification on fractionation column using rule based expert system. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 504-509.

Mohd Yunus, Rosli and Junin, Radzuan and Sulaiman, Ahmad Ziad and Abdul Aziz, Ramlan and Ngah, Mokhtar and Nasir, Abu Samah and Sethpa, Mohd Sabri (2001) Intensified Niagara leaf filtration via in-situ ultrasonic wave fields. Proceedings of The 15th Symposium of Malaysian Chemical Engineers SOMChE 2001 . pp. 531-535.

Mohd Yusof, Zainal Abidin and Hashim, Shahrir and Rahmat, Abdul Razak (1994) The mechanical properties of toughened poly(methyl methacrylate) sheet materials (part 1). Buletin FKKKSA, 8 (1). pp. 7-12. ISSN 0128-0740

Mohd Yusof, Khairiyah and Kamsah, Mohd Zaki and Abdul Aziz, Badhrulhisham (1994) Computer-aided process engineering (CAPE): education and practice. Seminar Penyelidikan Fakulti Kej. Kimia & Kej. Sumber Asli .

Mohd Yusof, Khairiyah and Yunus, Robiah and Yong, Fo Sin and Tan, Boon Seong and Ripin, Adnan and Abdul Aziz, Badhrulhisham (1995) Multimedia in chemical engineering education: Universiti Teknologi Malaysia Experience. Proceedings of The Eleventh Symposium of Malaysia Chemical Engineers . B1-1.

Mohd Yusof, Mohd Rashid and I., Salmah and R.S., Ahmad (1991) Kesan suhu terhadap kandungan lembapan dan asid lemak bebas isirong kelapa sawit. Buletin FKKKSA, 5 (1). pp. 14-20. ISSN 0128-0740

Mohd Zaki, Mohd Zulkifli and Ibrahim, Noraini and Deris, Safaai and Abd. Halim, Shahliza (2011) Mapping Architectural Concepts to SysML Profile for Product Line Architecture Modeling. In: ICSEA 2011 : The Sixth International Conference On Sofware Engineering Advances.

Mohd., Mohd. Safie and Alias, Buang and Daud, Dzurllkanian (2006) GIS analysis for flood hazard mapping: Case study Segamat, Johor, West Malaysia. In: Seminar Nasional GIS 2006: Geographic Information System Application for Mitigation in Natural Disaster, 29 November 2006 , Universiti Indonesia, Jakarta . (Unpublished)

Mohd., Norhazren Izatie and Tajul Ariffin, Hamizah Liyana and Nordin, Muhammad Yusuf and Mohamad Ramly, Zuhaili and Mat Dzahir, Mohd. Azwarie and Omar, Siti Rahmah and Asmawii, Mohammad Fahrulradzi (2020) Mini-review on technology in safety training delivery. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Putrajaya, Putrajaya, Malaysia.

Mohd., S. and Syazli Fathi, M. and Nahar Harun, A. (2019) Information management for humanitarian aid distribution system in Malaysia. In: 10th Asia Pacific Structural Engineering and Construction Conference 2018, 13-15 Nov 2018, Adya Hotel Malawi, Langkawi, Kedah, Malaysia.

Mohd., Suzila and Fathi, Mohamad Syazli and Harun, Aizul Nahar and Omar Chong, Noraini (2018) Key issues in the management of the humanitarian aid distribution process during and post-disaster in Malaysia. Planning Malaysia, 16 (1). pp. 211-221. ISSN 1675-6215

Mohd. Ali, Hishamuddin and Alias, Buang and Daud, Dzulkarnian @ Dzulkarnain (2004) Determination of fair rental value of higher learning institution (HLI) properties : a case study of Universiti Teknologi Malaysia. Project Report. UTM. (Unpublished)

Mohd. Ali, Nor Raihana and Ibrahim, Muhammad Asyraf (2018) Factors affecting the decision in providing training and development in small medium sized engineering companies. In: 2nd Master Project Symposium.

Mohd. Ali, R. and Benk, S. and Budak, T. and Mohd. Isa, K. and Yussof, S. H. (2017) A cross-cultural study of religiosity and tax compliance attitudes in Malaysia and Turkey. eJournal of Tax Research, 15 (3). pp. 490-505. ISSN 1448-2398

Mohd. Aliff, Mohd. Aliff and Fitri Danieal, Fitri Danieal and Mohamed, Mohd. Firdaus and Ahmad 'Athif, Ahmad 'Athif and Tetsuya, Akagi and Nor Samsiah, Nor Samsiah (2020) Development of flexible pneumatic rehabilitation actuator for knee injury. Test Engineering And Management, 83 . pp. 12849-12855. ISSN 0193-4120

Mohd. Aman, Azana Hafizah and Hassan, Wan Haslina and Sameen, Shilan and Attarbashi, Zainab Senan and Alizadeh, Mojtaba and Abdul Latiff, Liza (2021) IoMT amid COVID-19 pandemic: Application, architecture, technology, and security. Journal of Network and Computer Applications, 174 . p. 102886. ISSN 1084-8045

Mohd. Amin, Mohd. For and Chan, Sook Huei and Md Rafik, Abdul Ghani (2009) Rippability classification for quartzite based on specific energy and field production rate. Malaysian Journal of Civil Engineering, 21 (1). pp. 42-54.

Mohd. Amin, Shamsudin and Abdul Rashid, Husain and Sanhoury, I. M. H. (2011) Trajectory tracking of steering system mobile robot. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11 - Conference Proceedings. IEEE, Kuala Lumpur, pp. 1-5. ISBN 978-161284435-0

Mohd. Amir, Siti Nur Khairunisa and Mad Nordin, Mariam Firdhaus and Shameli, Kamyar and Mohamad Abdul Wahab, Izzati and Abdul Hamid, Mariani (2020) Modeling and optimization of pilot-scale subcritical water extraction on Zingiber zerumbet by central composite design. In: 26th Regional Symposium on Chemical Engineering, RSCE 2019, 30 - 1 November 2019, Kuala Lumpur, Malaysia.

Mohd. Aras, Mohd. Shahrieel and Abdullah, Shahrum Shah and Abdul Rahman, Ahmad Fadzli Nizam and Hasim, Norhaslinda and Abdul Azis, Fadilah and Lim, Wee Teck and Mohd. Nor, Arfah Syahida (2015) Depth control of an underwater remotely operated vehicle using neural network predictive control. Jurnal Teknologi, 74 (9). pp. 85-93. ISSN 0127-9696

Mohd. Ariff, Mohd. Farid (2005) Pembangunan sistem perolehan imej fotogrametri digital jarak dekat bagi pengukuran craniofacial. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Ariff, Mohd. Farid and Majid, Zulkepli and Chong, Albert K. and Setan, Halim (2009) Photogrammetric-based security system. Geoinformation Science Journal, 9 (1). pp. 62-69. ISSN 1511-9491

Mohd. Arof, Khairul Zahreen and Awang, Mohd. Daud and Abd. Rashid, Mohd. Hambali and Ismail, Syuhaida (2021) Coronavirus 2019 (COVID-19) outbreak lockdown: the effect on spiritual, physical, emotional, intellectual and financial states of the Muslim believers. Islamic Thought and Civilization (JITC), 11 (2). pp. 389-399. ISSN 2075-0943

Mohd. Arof, Khairul Zahreen and Ismail, Syuhaida and Saleh, Abd. Latif (2018) Critical success factors of contractor’s performance appraisal system in Malaysian construction industry. Indian Journal of Public Health Research and Development, 9 (11). pp. 1197-1206. ISSN 0976-0245

Mohd. Azmi, Nurulhuda Firdaus and Ab. Rahim, Nor Zairah and Ali, Rosmah and Mahmoud Al-Raheem, Yousif Osama (2018) A systematic literature review of software help systems limitations. Indian Journal of Science and Technology, 11 (4). pp. 1-8. ISSN 0974-6846

Mohd. Baharin, Rasyidah Hanan and Yamada, Yoshihide and Kamardin, Kamilia and Nguyen, Quoc Dinh and Michishita, Naobumi (2018) Input resistances of small normal-mode helical antennas in dielectric materials. In: 2017 IEEE Asia Pacific Microwave Conference, APMC 2017, 13 November 2017 through 16 November 2017, Renaissance Kuala Lumpur Hotel Kuala Lumpur, Malaysia.

Mohd. Bakhori, Siti Nadia and Hassan, Mohamad Zaki and Abdul Aziz, Sa’ardin and Sheikh Md. Fadzulah, Siti Hajar and Ahmad, Fauzan (2018) Tensile properties of jute-polypropylene composites. Chemical Engineering Transactions, 63 . pp. 727-732. ISSN 2283-9216

Mohd. Bakhori, Siti Nadia and Zuikafly, Siti Nur Fatin and Ahmad, Fauzan and Hassan, Mohamad Zaki (2017) Tensile properties for MWCNT filled jute-epoxy composites. Journal of Advanced Research in Applied Mechanics, 31 (1). pp. 16-21. ISSN 2289-7895

Mohd. Buang, Mohd. Farid and Mohd. Daud, Salwani (2012) A web-based KM system for digital forensics – knowledge sharing capability. In: 2012 International Conference on Multimedia Computing and Systems (ICMCS). IEEE Explorer, pp. 528-533. ISBN 978-1-4673-1518-0

Mohd. Danuri, Mohd. Suhaimi and Mohd. Ishan, Zahira and Mustaffa, Nur Emma and Abd. Karim, Saipol Bari and Mohamed, Othman and Hanid, Mahanim (2016) Dispute avoidance procedure: formulating a workable legal system in the Malaysian construction industry. Journal of Design and Built Environment, 16 (1). pp. 37-46. ISSN 1823-4208

Mohd. Daud, Salwani (2010) Indeks bi’ah salihah and komunikasi maya. In: Kelestarian Sistem Pendidikan Bersepadu: Model Pusat Pendidikan Al-Amin, JIMedia. n/a. ISBN 970-983-9782-76-9

Mohd. Daud, Salwani (2011) Sustainable human development: bi’ah salihah index in Al-Amin education system. PERINTIS e-Journal, 1 . pp. 36-43. ISSN 2232-0725

Mohd. Ghani, Nuritaasma and Selamat, Hazlina and Khamis, Nurulaqilla and Ghazalli, Shuwaibatul Aslamiah (2020) Crowd modelling validation for modified social force model. International Journal of Integrated Engineering, 12 (2). pp. 10-18. ISSN 2229-838X

Mohd. Ghazalee, Nor Husna (2012) Electronic field data collection system for highway inspection maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Halim, Siti Nabilah and Jasni, Nur Afiqah Husna and Mohamad Taib, Mohamad Fariz and Wan Nawawi, Wan Mohd. Fazli and Ahmad, Fauzan (2021) Liquid-phase exfoliated graphene-MoS2 based saturable absorber for Q-switched erbium doped fiber laser. In: 4th Photonics Meeting 2021, PM 2021, 15 - 16 September 2021, Terengganu, Virtual.

Mohd. Hamzah, Mohd. Faizal and Mohd. Rijal, Omar and Kimura, Kozo and Mohd. Noor, Norliza (2019) Malaysian women shoe sizing system using multivariate normal probability distribution. IEEE Access, 7 . pp. 142726-142737. ISSN 2169-3536

Mohd. Hanafi@Hanafiah, Mohd. Mukrish (2012) The photoprotective and collagen stimulatory effects of labisia pumila var pumila extract on UVB irradiated human skin fibroblast (HSF1184) cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Hashim, Siti Zaiton and Mardiyono, Mardiyono and Anuar, Nurulhaini and Wan Kadir, Wan Mohd. Nasir (2008) Comparative analysis on adaptive features for RFID middleware. In: Proceedings of the International Conference on Computer and Communication Engineering 2008, 13-15 May 2008, Kuala Lumpur, Malaysia.

Mohd. Hosnan, Mohd. Husaini (2012) The development of wetland conservation and management plan for Sungai Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ideris, Ahmad Tarmidzi and Mohd. Aris, Siti Armiza and A. Jalil, Siti Zura and Bani, Nurul Aini and Mad Kaidi, Hazilah and Muhtazaruddin, Mohd. Nabil (2018) Heat exposure assessment among warship technicians in machinery room. Journal Of Advanced Research In Occuptional Safety And Health, 1 (1). pp. 19-23. ISSN 2637-0255

Mohd. Idrus, N. H. and Musa, M. N. and Yahya, W. J. and Ithnin, A. M. (2017) Geo-Ocean Thermal Energy Conversion (GeOTEC) power cycle/plant. Renewable Energy, 111 . pp. 372-380. ISSN 0960-1481

Mohd. Ishak, Noriah and Ariffin, Siti Rahayah and Din, Rosseni and Abd. Karim, Aidah (2002) Expanding the traditional classroom through computer technology : collaborative learning in graduate social science courses. Jurnal Teknologi 37 (E), 37 . pp. 17-28.

Mohd. Ismail, Kamsiah and Radin Salim, Kamilah and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ali, Rosmah and Abdullah, Morina and Mohamed, Zainai (2018) Evaluation of laboratory facilities for engineering technology programs in Malaysian technical universities. International Journal Of Social Science Studies, 6 (5). pp. 65-73. ISSN 2324-8033

Mohd. Ismail, Mohd. Ismifaizul and Dziyauddin, Rudzidatul Akmam and Ahmad, Robiah and Ahmad, Norulhusna and Ahmad, Noor Azurati and Abdul Hamid, Afifah Maheran (2021) A review of energy harvesting in localization for wireless sensor node tracking. IEEE Access, 9 . pp. 60108-60122. ISSN 2169-3536

Mohd. Izhar, M. A. and Aljohani, A. and Ng, S. X. and Hanzo, L. (2017) Distributed joint source coding and trellis coded modulation for symbol-based Markov sources. IEEE Transactions on Vehicular Technology . ISSN 0018-9545 (In Press)

Mohd. Izhar, M. A. and Babar, Z. and Ng, S. X. and Hanzo, L. (2017) Entanglement-assisted classical communication over quantum channels for binary Markov sources. IEEE Transactions on Vehicular Technology . ISSN 0018-9545 (In Press)

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mamat, Rizalman (2009) Propelan pepejal kalium nitrat difabrikasi kaedah pengacuanan mampat. Jurnal Teknologi, 50 (F). pp. 41-51. ISSN 2180-3722

Mohd. Jamari, S. K. and Ubaidillah, U. and Abdul Aziz, Siti Aishah and Nordin, Nur Azmah and Fajrin, A. and Mazlan, Saiful Amri (2020) Mini review on effect of coatings on the performance of magnetorheological materials. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 - 17 October 2019, Surakarta, Indonesia.

Mohd. Jamari, Siti Khumaira and Nordin, Nur Azmah and Ubaidillah, U. and Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Nazmi, Nurhazimah (2021) Enhancement of the rheological properties of magnetorheological elastomer via polystyrene-grafted carbonyl iron particles. Journal of Applied Polymer Science, 138 (34). p. 50860. ISSN 0021-8995

Mohd. Jamari, Siti Khumaira and Nordin, Nur Azmah and Ubaidillah, Ubaidillah and Abdul Aziz, Siti Aishah and Nazmi, Nurhazimah and Mazlan, Saiful Amri (2020) Systematic review on the effects, roles and methods of magnetic particle coatings in magnetorheological materials. Materials, 13 (23). pp. 1-21. ISSN 1996-1944

Mohd. Johari, Nory Afzan and Haron, Habibollah and Mohamad Jaya, Abdul Syukor (2007) Robotic modeling and simulation of palletizer robot using Workspace5. In: Computer Graphics, Imaging and Visualisation: New Advances, CGIV 2007 .

Mohd. Kamal, N. A. and Razak, K. A. and Rambat, S. (2019) Land use/land cover assessment in a seismically active region in Kundasang, Sabah. In: 6th International Conference on Geomatics and Geospatial Technology, GGT 2019, 1-3 Oct 2019, Kuala Lumpur, Malaysia.

Mohd. Mokhtar, Nadzirah (2015) Membrane distillation for textile wastewater treatment using polyvinylidene fluoride cloisite 15A hollow fiber composite membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohd. Mokhtar, Nurul Farhanah and Nordin, Mariam Firdhaus Mad and Morad, Noor Azian (2018) Total phenolic content, total flavonoid content and radical scavenging activity from zingiber zerumbet rhizome using subcritical water extraction. International Journal of Engineering, Transactions B: Applications, 31 (8). pp. 1421-1429. ISSN 1728-144X

Mohd. Nani, S. Z. and Jaafar, A. and Majid, A. A. A. and Mahdzir, A. and Musa, M. N. (2019) Effects of deep sea water on anti-obesity properties in induction of beige adipocytes. Current Chemical Biology, 13 (1). pp. 38-48. ISSN 2212-7968

Mohd. Nasir, N. A. and Nazmi, N. and Mohamad, N. and Ubaidillah, U. and Nordin, N. A. and Mazlan, S. A. and Abdul Aziz, S. A. (2021) Rheological performance of magnetorheological grease with embedded graphite additives. Materials, 14 (17). ISSN 1996-1944

Mohd. Nawi, M. N. and Roslan, S. and Salleh, N. A. and Zulhumadi, F. and Harun, A. N. (2016) The benefits and challenges of E-procurement implementation: A case study of Malaysian company. International Journal of Economics and Financial Issues, 6 (7Speci). pp. 329-332. ISSN 2146-4138

Mohd. Noor, Alias and Che Puteh, Rosnizam and Rajoo, Srithar and Basheer, Uday M. and Md. Sah, Muhammad Hanafi and Shaikh Salleh, Sheikh Hussain (2015) Simulation study on electric turbo-compound (ETC) for thermal energy recovery in turbocharged internal combustion engine. In: Applied Mechanics and Materials, 2015.

Mohd. Noor, Noorliza and Mohd. Rijal, Omar and Yunus, Ashari and Syed Abu Bakar, Syed Abdul Rahman (2010) A discrimination method for the detection of pneumonia using chest radiograph. Computerized Medical Imaging and Graphics, 34 (2). 160 - 166. ISSN 0895-6111

Mohd. Noor, Nor Farid and Yusoff, Mohamad Ezany and Abdul Rahman, Mohd. Azizi and Alam, Mohammad Khursheed and Harun, Ahmad Mukifza (2021) The disinfectant effect of modified hydrothermal nanotitania extract on candida albicans. BioMed Research International, 2021 . p. 6617645. ISSN 2314-6133

Mohd. Noor, Norhayati and Mohd. Mahdzir, Akbariah and Malek, Zulkifle and Abdul Karim, Aidah (2020) Adaptation of family counseling implementation in school setting to meet student wellbeing need: A qualitative research. Universal Journal Of Educational Research, 8 (12A). pp. 7792-7801. ISSN 2332-3213

Mohd. Noor, Norliza and Yunus, Ashari and Syed Abu Bakar, Syed Abdul Rahman and Hussin, Amran and Mohd. Rijal, Omar (2010) Applying a statistical PTB detection procedure to complement the gold standard. Computerized Medical Imaging and Graphics, 35 (3). 186 - 194. ISSN 0895-6111

Mohd. Noor, Nur Qamarina and Jamaludin, Azi Azwady and Azizan, Azizul and Abas, Hafiza and Kamardin, Kamilia and Mohd. Yakub, Mohd. Fitri (2018) Arduino vs raspberry Pi vs micro bit: platforms for fast IoT systems prototyping. Open International Journal of Informatics (OIJI), 6 (1). pp. 1-12. ISSN 2289-2370

Mohd. Noor, Siti Nur Aishah and Mohd. Tobi, Siti Uzairiah and Radin Salim, Kamilah (2020) Competencies of quantity surveyors in construction industry: Document reviews from different quantity surveyor professional bodies. In: 2nd Joint Conference on Green Engineering Technology and Applied Computing 2020, IConGETech 2020 and International Conference on Applied Computing 2020, ICAC 2020, 4 - 5 February 2020, Bangkok, Thailand.

Mohd. Nor, Ariff Farhan and Hassan, Mohamad Zaki and A. Rasid, Zainudin and Abdul Aziz, Sa’ardin and Sarip, Shamsul and Md. Daud, Mohd. Yusof (2021) Optimization on Tensile Properties of Kenaf/Multi-walled CNT Hybrid Composites with Box-Behnken Design. Applied Composite Materials, 28 (3). pp. 607-632. ISSN 0929-189X

Mohd. Nor, Muhamamd Izzat Amir and Mohd. Izhar, Mohd. Azri and Ahmad, Norulhusna and Mad Kaidi, Hazilah (2018) Joint Source Channel Decoding exploiting 2D source correlation with parameter estimation for image transmission over Rayleigh fading channels. International Journal of Integrated Engineering, 10 (7). pp. 332-344. ISSN 2229-838X

Mohd. Nor, Muhammad Izzat Amir and Mohd. Izhar, Mohd. Azri and Ahmad, Norulhusna and Md. Kaidi, Hazilah (2018) Exploiting 2-dimensional source correlation in channel decoding with parameter estimation. International Journal of Electrical and Computer Engineering, 8 (4). pp. 2633-2642. ISSN 2088-8708

Mohd. Omar, Kamaludin and Ses, Shahrum and Mohamed, Azhari (2004) Rapid monitoring system for the National Geodetic Vertical Datum (NGVD). Project Report. UTM. (Unpublished)

Mohd. Omar, Kamaludin and Subari, Mustafa Din (2004) Study towards real time precise point positioning systems using GPS engine receiver. Project Report. UTM. (Unpublished)

Mohd. Omar, Kamaludin and Ses, Shahrum and Mohamed, Azhari (2003) Enhancement of height system for Malaysia using space technology: the study of the datum bias inconsistencies in Peninsular Malaysia. Project Report. Faculty of Geoinformation Science and Engineering (FKSG). (Unpublished)

Mohd. Osman, Mohd. Hassan and Boocock, Grahame (2008) Business strategy as determinant of growth among high technology small medium enterprises. In: Technology Management: Theory And Practice. Penerbit UTM , Johor, pp. 189-212. ISBN 978-983-52-0688-7

Mohd. Rasidek, N. A. and Mad Nordin, M. F. and Shameli, K. (2016) Formulation and evaluation of semisolid jelly produced by Musa acuminata Colla (AAA Group) peels. Asian Pacific Journal of Tropical Biomedicine, 6 (1). pp. 55-59. ISSN 2221-1691

Mohd. Rasidek, Noor Azwani and Mad Nordin, Mariam Firdhaus and Iwamoto, Koji and Abd. Rahman, Norazah and Nagatsu, Yuichiro and Tokuyama, Hideaki (2018) Rheological flow models of banana peel pectin jellies as affected by sugar concentration. International Journal of Food Properties, 21 (1). pp. 2087-2099. ISSN 1094-2912

Mohd. Rasidek, Noor Azwani and Mad Nordin, Mariam Firdhaus and Tokuyama, Hideaki and Nagatsu, Yuichiro and Mili, Norlisa and Zaini, Ahmad Syahmi and Idham, Zuhaili and Che Yunus, Mohd. Azizi (2021) Subcritical water-based pectin from banana peels (Musa Paradisiaca Cv.Tanduk) as a natural gelation agent. In: 3rd International Conference on Separation Technology, ICoST 2020, 15 - 16 August 2020, Johor, Malaysia.

Mohd. Rijal, Omar and Mohd. Noor, Norliza and Chang, Yun Fah (2001) Critical remarks on some applications of digital image analysis with emphasis on statistical methodology. Jurnal Teknologi D (35D). pp. 1-14. ISSN 0127-9696

Mohd. Rijal, Omar and Mohd. Hamzah, Mohd. Faizal and Sankaraiah, S. and Mohd. Noor, Norliza (2018) A three dimensional foot fourier descriptors model. ARPN Journal of Engineering and Applied Sciences, 13 (13). pp. 4042-4056. ISSN 1819-6608

Mohd. Rohani, Jafri and Abdul Kadir, Aini Zuhra and Abdul Rani, Mat Rebi and Md. Zein, Raemy and Abdul Aziz, Roseni and Adeyemi, Ademola James (2015) Musculoskeletal disorders in body regions and its associated risk factors among electronics workers in Malaysia. In: Proceedings 19th Triennial Congress of the IEA, 9-14 Aug, 2015, Australia.

Mohd. Saat, Sa'adiah (2006) Analisis untuk mengenalpasti risiko kejadian lubang benam menggunakan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Sahri, Dzulkarnain and Zaini, Nabilah and Nasri, Noor Shawal and Mohd. Zain, Husna and Mohamed Rashid, Norhana and Noor Shawal, Anis Shahirah (2020) Carbon dioxide adsorption equilibrium rates comparative temperature study using palm kernel shell sorbent. In: The 7th AUN/SEED-Net Regional Conference on Natural Disaster, 25 - 26 November 2019, Kuala Lumpur, Malaysia.

Mohd. Sakri, Fadhilah and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Muhamad, Sallehuddin (2015) Numerical simulation of liquids draining from a tank using openFOAM. In: The International Conference on Computational Fluid Dynamics in Research and Industry 2015, 17-19 August, 2015, Kuala Lumpur, Malaysia.

Mohd. Sam, Suriani and Kamardin, Kamilia and Azizan, Azizul and Mohamed, Norliza and Ahmed, Irfanuddin Shafi and Taj R., Noureen (2018) System for improving sleep quality by using internet of things. Open International Journal of Informatics (OIJI), 6 (3). pp. 21-31. ISSN 2289-2370

Mohd. Sanip, Suhaila and Saidin, Mohd. Abdul Razis and Ismail, Ahmad Fauzi (2007) Hydrogen adsorption on activated carbon and carbon nanotubes using volumetric differential pressure technique. In: International Conference on Advancement of Materials and Nanotechnology 2007, 29th May-1st June 2007, The City Bayview Hotel, Langkawi, Kedah.

Mohd. Sanip, Suhaila and Tee, Jia Chee and Saidin, Mohd. Abdul Razis and Aziz, Madzlan and Ismail, Ahmad Fauzi (2007) Hydrogen adsorption capacity of multiwalled carbon nanotubes grown over different catalyst supports. In: The 23rd Regional Conference On Solid State Science and Technology 2007, 27-29 November 2007, Hyatt Regency Hotel, Johor Bahru, Malaysia.

Mohd. Saufi, Badariah (2010) Penyediaan dan pengurusan inventori jalan dan aset jalan dari lukisan siap bina menggunakan GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Shaari Azyze, Nur Latif Azyze (2012) Stable walking gaits for humanoid robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering .

Mohd. Sharif, N. and Md. Yusoff, N. and Zaki, S. A. (2016) Q-switched Thulium-doped fiber laser using nitrogen-doped graphene in linear and ring cavity. In: 6th IEEE International Conference on Photonics, ICP 2016; Kuching, Sarawak; Malaysia, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Mohd. Shariff, Normawati and Wong, Boon Wei (2018) Evaluation of occupational stress of royal Malaysian navy radar plotters. In: Proceedings of the 2nd Master Project Symposium.

Mohd. Shariff, Normawati and Yahya, Izzah (2018) The impact of transactional uncertainties in supply chain on sales performance. In: 2nd Proceedings of Master Project Symposium.

Mohd. Shatar, Nursyahirah and Abdul Rahman, Mohd. Azizi and Muhtazaruddin, Mohd. Nabil and Shaikh Salim, Sheikh Ahmad Zaki and Singh, Baljit and Muhammad Sukki, Firdaus and Bani, Nurul Aini and Mohd. Saudi, Ahmad Shakir and Ardila Rey, Jorge Alfredo (2019) Performance evaluation of unconcentrated photovoltaic-thermoelectric generator hybrid system under tropical climate. Sustainability (Switzerland), 11 (22). p. 6192. ISSN 2071-1050

Mohd. Supa'at, Abu Sahmah and Chan, Poh Kam (2008) Wireless optical communication in Malaysia. In: Communication Services In Malaysia. Penerbit UTM, Johor, pp. 44-52. ISBN 978-983-52-0657-3

Mohd. Taib, Jamaludin (2002) Feature research : review and future direction. Jurnal Mekanikal (13). pp. 1-10. ISSN 0127-3396

Mohd. Tobi, Siti Noraini and Masrom, Maslin and Mohammed, Azman and Abdullah, Mohd. Nasir (2015) The moderating effect of psychological factors towards the diffusion of a web-based health information service (WBHIS). In: 3rd International Conference on Social Sciences Research 2015 (ICSSR 2015), 8-9 Jun, 2015, Kuala Lumpur, Malaysia.

Mohd. Tobi, Siti Uzairiah and Fathi, Mohamad Syazli and Amaratunga, Dilanthi (2018) Ageing in place framework as reference guide for housing in Malaysia: Landed property. Planning Malaysia, 16 (1). pp. 130-143. ISSN 1675-6215

Mohd. Yakub, Mohd. Fitri and Che Daud, Zul-Hilmi and A. Rasid, Zainudin and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Syed Mohd. Putra, Sharifah Munawwarah (2018) Linear quadratic regulator based control device for active suspension system with enhanced vehicle ride comfort. Journal of the Society of Automotive Engineers Malaysia, 2 (3). pp. 289-305. ISSN 2550-2239

Mohd. Yazid, Izyan Iryani (2016) Design and investigation of a new mixed-mode magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology (MJIIT).

Mohd. Yunus, Masliza and Megat Mohd. Zainuddin, Norziha and Maarop, Nurazean and Ibrahim, Roslina and Che Mohd. Yusoff, Rasimah and Narayana Samy, Ganthan and Wan Hassan, Wan Azlan (2015) The heuristic evaluation on the internet safety guideline for primary school students. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 230-240. ISSN 1819-6608

Mohd. Yusof, Khairiyah (1992) Overview of single-input single-output distillation control. Buletin FKKKSA, 6 (2). pp. 34-39. ISSN 0128-0740

Mohd. Yusof, Khairul Nizar (2002) Mineralogi, mikrosstruktur dan komposisi kimia tanah baki granit di Semenanjung Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yusof, Mohd. Rashid and Abd. Rahim, Siti Hajar and Ammar, M. R. and Andenan, Nurnadia (2015) The effect of prekotAC on particle penetration through a PTFE filter media. Perintis E-Journal, 5 (1). pp. 22-23.

Mohd. Yusof, Mohd. Rashid and Hasrizam, C. M. and Hussein, Norelyza and Hashim, Nur Hasyimah (2015) Experimental and theoretical performance of Mr-Deduster as a fine particle emission control system. In: International Conference on Fluids & Chemical Engineering, 25-27 Nov, 2015, Langkawi, Malaysia.

Mohd. Yusof, Mohd. Rashid and Lim, S. F. and A., Rahmalan (1997) Size segregated of atmospheric sulphate aerosols in Johor Bahru. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October 1997, Hyatt Regency, Johor, Malaysia.

Mohd. Yusoff, Mohd. Rashid and K., Sathiasilan and Mat, Ramli (1997) Point source SO2 dispersion modeling under various stack heights and meteorological conditions. In: Regional Symposium on Chemical Engineering 1997 in conjunction with 13th Symposium of Malaysian Chemical Engineers, 13-15 October, 1997, Hyatt Regency, Johor, Malaysia.

Mohd. Yusoff, Mohd. Rashid and Nasri, Noor Shawal and Abdullah, Abdul Hamid and Abdul Rahman, Mohd. Yaccob Khan (1990) Tragedi kebocoran gas ammonia di Melaka - satu tinjauan. Buletin FKKKSA, 4 (1). pp. 19-24. ISSN 0128-0740

Mohd. Yusop, Yuzlina and Othman, Nooraini (2019) Linking the Malaysia’s solid waste management policy instruments with household recycling behavior. International Journal of Academic Research in Progressive Education and Development, 8 (4). pp. 474-488. ISSN 2226-6348

Mohd. Zain, N. A. and Suhaimi, M. S. and Idris, Ani (2007) Determination of effective diffusion coefficient of immobilized Baker's yeast invertase in various concentration of PVA-alginate matrix. Proceedings of the International Conference on Biotechnology Engineering ICBioE'07 . pp. 248-255.

Mohd. Zaki, Mohd. Zahlan and Kamarudin, Md. Nor (2005) Tropospheric delay effects on relative GPS height determination. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27-29 September 2005, Pulau Pinang.

Mohd. Zaki, N. I. and Abu Husain, M. K. and