Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Civil Engineering" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y
Number of items: 82.

A

Abdul Hassan, Norhidayah and Ruzi, Nur Azni and Mohd. Shukry, Nurul Athma and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Mohd. Kamaruddin, Nurul Hidayah and Abdullah, Mohd. Ezree (2019) Physical properties of bitumen containing diatomite and waste engine oil. Malaysian Journal of Fundamental and Applied Sciences, 15 (4). pp. 528-531. ISSN 2289-5981

Abdul Rahim, Abdul Rafie (2019) Consequences of non-value adding activities on construction project performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rashid, Ahmad Fadzli Reza (2019) Keberkesanan pusat setempat (OSC) di pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Abdul Rashid, Idris (2019) Isu etika di kalangan profesional dalam industri pembinaan Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Adamu, Ibrahim Aliyu (2019) Microwave properties of bitumen modified with waste cooking oil (WCO). Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Aie, Nyemas Dewi Pramita (2019) Preliminary assessment on land surface temperature map and slope stability at Jelutong landfill. Masters thesis, Universiti Teknologi Malaysia.

Aldulaimi, Musaab Adil Abdullah (2019) Best value procurement for contractor selection in the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alwee, Amir Akmal (2019) Issues and challenges of maintenances works for Universiti Teknikal Malaysia Melaka (UTeM) student accommodation under private finance initiative. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Alwjim, Kotaiba (2019) Seismic fragility curves for tall wall concrete buildings in Malaysia under near-field earthquakes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Amat Bakri, Nurul Khalida (2019) Risk management of design and build project. Masters thesis, Universiti Teknologi Malaysia.

Arifin, Hanis Hazirah and Zainal, Nurfarahin and Zardasti, Libriati and Yahaya, Nordin and Lim, Kar Sing and Md Noor, Norhazilan (2019) Mechanical properties of carbon nanotubes-modified epoxy grout for pipeline repair system. Jurnal Teknologi, 31 (8). pp. 169-177. ISSN 2180-3722

Azili, Norshahida (2019) Implication of liability transfer towards architect in the issuance of certificate of completion and compliance (ccc) in building industry. Masters thesis, Universiti Teknologi Malaysia.

Azman, Nadiah (2019) Building condition assessment on a heritage building : Dato Abdullah Jaafar building. Masters thesis, Universiti Teknologi Malaysia.

Azmi, Nurshazriena (2019) The implementation of building information modeling in MACalaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

Azmi, Nurshazriena (2019) The implementation of building information modeling in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia.

B

Babatunde, Ogunbode Ezekiel and Mohamad Yatim, Jamaludin and Affendi, Hazim and Abdul Aziz, Azmahani and Mohd. Yunus, Ishak and Abdul Hamid, Hazlan (2019) An evaluation of the interfacial bond strength of kenaf fibrous concrete and plain concrete composite. International Journal of Built Environment and Sustainability, 6 (1). pp. 1-6. ISSN 2289-8948

Baharudin, Nur Azlin (2019) Settlement assessment of soft soil reinforced by partially penetrated by soil cement column. Masters thesis, Universiti Teknologi Malaysia.

Basius, Mohd. Syafiq (2019) Energy dissipation and ductility of steel plate shear wall with perforation. Masters thesis, Universiti Teknologi Malaysia.

Basri, Hazlami Fikri and Anuar, Aznah Nor and Ab. Halim, Mohd. Hakim (2019) Wastewater characterization and sequencing batch reactor operation for Aerobic Granular Sludge cultivation. Malaysian Journal Of Civil Engineering, 31 (1). pp. 9-16. ISSN 1823-7843

C

Chang, Teck Leong (2019) Soil slope remediation works using soil nail. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Chong, Jia Wen (2019) Construction waste management practice towards sustainable development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

E

Einab, Abdirahman Abshir (2019) Elements that will improve driver’s safety during poor weather conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

F

Fakhruddin, Khalid Ahmed (2019) Reliability assessment and calibration of ISO-LRFD factors for minimum facility offshore platfrom in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Fathol Karib, Siti Aisyah (2019) Seismic fragility of tall concrete wall structures in Malaysia under far-field earthquakes. Masters thesis, Universiti Teknologi Malaysia.

G

Gan, Zhi Han (2019) Non-linear analysis of RC bridge slab on prestressed beams in transverse direction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Gyeyok, Ashio Gillian (2019) Implementation of green materials as supplementary cement replacement in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

H

Hamdi, Noor Faezah (2019) The effect of thermal ageing on low voltage cross-linked polyethylene insulated cable. Masters thesis, Universiti Teknologi Malaysia.

Hamzani, Intan Nurfauzirah Shafiqah (2019) Bus rapid transit at isolated vehicle actuated junction using recall and green extension bus priority strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Harun, Mazlan (2019) Stability analysis for slope rehabilitation works at km424.80 South bound, North South expressway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Harun, Mohd. Safwan (2019) Mechanical properties and short-term performance of sulphate resistance of effective microorganisms–fly ash geopolymer concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Hossain, Md. Awlad (2019) Effect of effective micro-organism on temperature variation and properties of concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

I

Ibrahim, Izzuain (2019) Building condition assessment on Datin Seri Endon residential college. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ismail, Afiqah (2019) Crack detection on retaining wall by using thermal camera and image processing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ismail, Norazila (2019) Improvement to constructor quality delivery by qlassic intergration into iso 9001 work process. Masters thesis, Universiti Teknologi Malaysia.

J

Jamal, Muhammad Adib (2019) The management of industrialized building systems (ibs) projects using radio-frequency identification (rfid) technology. Masters thesis, Universiti Teknologi Malaysia.

Jamri, Heirlina Mawarni (2019) Estimation of debris flow sedimentation volume through numerical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Jasman, Nursyiqah (2019) Correlation between uniaxial compressive strength and point load strength index of granite sample. Masters thesis, Universiti Teknologi Malaysia.

K

Kamarrudin, Alia (2019) Critical success factors and barriers of implementing lean manufacturing in precast industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Khairul Anuar, Mohamad Amir Syafiq (2019) Selection factor to bid or not to bid for extra low voltage system (ELV) project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Khairul Anuar, Safinaz (2019) Fibre optic sensing monitoring system for pile on slope. Masters thesis, Universiti Teknologi Malaysia.

Khan, Adil (2019) Ground improvement for ring beam tank foundation compared between vibro replacement against combination of dynamic techniques with numerical models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

L

Loh, Seng Yap (2019) Key factors affecting the adaptation of prefabricated prefinished volumetric construction (PPVC) in Malaysia industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

M

M. Saeed, Aseel Abdulhaleem (2019) Condition assessment of reinforced concrete : bridge structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Maha, Raihana Rozan (2019) Microplastic contamination in green mussel aquaculture at straits of Johor. Masters thesis, Universiti Teknologi Malaysia.

Mahmad Raseh, Nur Balqis Idayu (2019) Mechanical properties of concrete incorporating spent abrasive waste. Masters thesis, Universiti Teknologi Malaysia.

Mahmood @ Mohd. Zawawi, Aidil (2019) A comparative study of Malaysian expressway traffic management with selected countries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamad Noor, Athirah Afiqah (2019) Keupayaan pengurangan kebisingan konkrit berliang menggunakan cangkerang kelapa sawit sebagai gantian agregat bagi pembinaan penghalang kebisingan lebuh raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohamed Abdeen, Abdullah Adelhttp://dms.library.utm.my:8080/vital/access/manager (2019) On-line recognition of developing control chart patterns performance of concrete pavement containing coal bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohammad, Toaha (2019) Development of an image processing model for the measurement of vibrations in structural elements by matlab and smartphone digital camera. Masters thesis, Universiti Teknologi Malaysia.

Mohammed Younis, Ibrahim (2019) Cost benefit analysis of photovoltaic technology adoption at rest and service area for Malaysia Highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Apandi, Nazirah (2019) Structural performance of repaired circular reinforced concrete columns using steel strapping tensioning technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Mohd. Azahar, Norfazira and Abdul Hassan, Norhidayah and Putra Jaya, Ramadhansyah and Md. Nor, Hasanan and Mohd. Satar, Mohd. Khairul Idham and Mashros, Nordiana and Mohamed, Azman (2019) Mechanical performance of asphalt mixture containing cup lump rubber. Jurnal Teknologi, 81 (6). pp. 179-185. ISSN 2180-3722

Mst. Kaniz Fatema, Mst. Kaniz Fatema (2019) Water quality assessment and trophic state classification of Tasik Ilmu, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Muhammad Arfat, Muhammad Arfat (2019) Reversible moisture damage in asphalt mixture. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Bilal, Muhammad Bilal (2019) Finite element modelling of crumb rubber concrete column subjected to earthquakes. Masters thesis, Universiti Teknologi Malaysia.

N

Nagarajan, Logeswaren (2019) Risk assessment practices in project scheduling to reduce potential delays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ng, Su Fen (2019) Distance insensitive concrete crack detection using convolutional neural network with controlled blurriness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Noruzman, Ainul Haezah (2019) Performance of polymer modified concrete incorporating polyvinyl acetate waste. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

O

Ong, Zhen Ling (2019) Capacity determination of intermodal container frame in resisting housing load. Masters thesis, Universiti Teknologi Malaysia.

P

Pui, Yvonne (2019) Slope stability assesment of remedial measures adjacent to transmission tower. Masters thesis, Universiti Teknologi Malaysia.

R

Ramanathan, Karthigeyan (2019) Effects of quarry blasting towards the residential area at Kangkar Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rosli, Mas Iliani (2019) Influence of considering Malaysia National Annex for seismic design of reinforced concrete building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Rusbintardjo, Gatot and Chin, Meei Jiun and Ibrahim, Ahmad Nazrul Hakimi and Babashamsi, Peyman and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2019) A comparative study of monitoring methods in sustainable pavement system development. Jurnal Teknologi, 81 (5). pp. 41-51. ISSN 2180-3722

S

Sabli, Abd. Ramzi (2019) Bus rapid transit using compensation method as bus priority system at isolated three-arm junction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Said, Aminu Saad (2019) Impact of climate change, variability and adaptation strategies on agriculture in semi-arid region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Samsuri, Mohd. Fadzilah (2019) Pengurusan perubahan kerja bagi kontrak pembinaan projek kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sediqi, Mohammad Naser (2019) Spatio temporal pattern in the changes in availability and sustainability of water resources in Afghanistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Shiraz, Hassan (2019) Hydrodynamic modelling of a sea-crossing bridge in the Maldives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Sohaili, Johan and Muniyandi, Shantha Kumari and Mohamad, Siti Suhaila and Ariffin, Azreen (2019) Effect of particle size and amount of nonmetallic PCB materials on the mechanical properties of rHDPE/PCB composites. Malaysian Journal of Fundamental and Applied Sciences, 15 (2). pp. 260-267. ISSN 2289-5981

Sulaiman, Suryati and Aris, Azmi and Abd. Razak, Abdul Syukor and Muda, Khalida and Nor Anuar, Aznah (2019) Influence of static mixer on the formation of biogranules. Jurnal Teknologi, 81 (1). pp. 23-30. ISSN 2180-3722

Syed Mokhtar, Syarifah Nur Husna Aiman (2019) The evaluation on risk factors for public- private partnering project in perak construction industry. Masters thesis, Universiti Teknologi Malaysia.

Syed Mokhtar, Syarifah Nur Husna Aiman (2019) The evaluation on risk factors for public-private partnering project in Perak construction industry. Masters thesis, Universiti Teknologi Malaysia.

T

Taherkhani, Roohollah and Saleh, A. L. (2019) Awareness and prevalence of industrialized building system (IBS) in Iran. Jurnal Teknologi, 81 (6). pp. 13-23. ISSN 2180-3722

Tan, May Ling (2019) Instructional scaffolding in online social collaborative learning environment for nurturing engineering students' knowledge construction level. Masters thesis, Universiti Teknologi Malaysia.

Teh, Kun Jie (2019) Efficiency of tuned liquid dampers in mitigating vibration of a plan-irregular structure. Masters thesis, Universiti Teknologi Malaysia.

W

Wahab, Wahyuni (2019) Physical and chemical properties of recycled bitumen incorporating rejuvenator. Masters thesis, Universiti Teknologi Malaysia.

Wong, Jing Siong (2019) Effects on loading calculation of reinforced concrete structural design subjected to fire: review on building codes and standards. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Wong, Lydia Lee (2019) The challenges of facility manager involvement at design stage using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Wong, Meng Siang (2019) Similitude relationship for circular concrete filled steel tube. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Y

Yahaya, Nor Ashikin (2019) Soft ground improvement using pile embankment. Masters thesis, Universiti Teknologi Malaysia.

Yong, Hua Song (2019) Building information modelling integration into Public-Private Partnership (PPP) risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Yvonne, Pui (2019) Slope stability assessment of remedial measures adjacent to transmission tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

This list was generated on Mon Sep 21 03:44:24 2020 +08.