Universiti Teknologi Malaysia Institutional Repository

Water permeability study of Nafion® 117 membrane after undergoing hot press

Kadhum, Abdul Amir H. and Mohamad, Abu Bakar and Wan Daud, Wan Ramli and Harahap, Navriani and Sitanggang, Ramli (2004) Water permeability study of Nafion® 117 membrane after undergoing hot press. In: Regional Symposium on Membrane Science and Technology 2004, 21-25 April 2004, Puteri Pan Pacific Hotel, Johor Bahru, Johor, Malaysia.

PDF (Full Text)


Influence of various hot press treatment on Electrode Assembly (MEA) fabrication was investigated. The correlation between press and water permeability through both side of electrode was observed also. The hot press with temperature at 130oC was found to be more relevant to produce a more pore sizes in the catalyst layer and supporting higher surface area. The hot press temperature of 130°C was observed to develop a better pores spaces. The MEA produced was analyzed for water flux test and porosity of membrane at various of temperature was investigated also. The balance between the hot press temperature and the pressure will allow the right amount of water to exit the electrode thus making the electrode more resistant, with better efficiently and long lasting.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:water permeability, humidifier, hot press, PEM fuel cell
Subjects:T Technology > TP Chemical technology
Divisions:Chemical and Natural Resources Engineering
ID Code:989
Deposited By: Pn Norazana Ibrahim
Deposited On:23 Feb 2007 07:33
Last Modified:30 Aug 2017 08:13

Repository Staff Only: item control page