Design and implementation of dp-dqpsk dwdm transmission system by using direct detection

Abstract

Designing a system that guarantees both the lower cost implantation, lower complexity on the receiver station side and higher data rate was an essential topic for several researchers recently, in which several methods and approaches were proposed to handle these problems individually and with the best overall outcome. In this work, these problems would be considered by designing and analyzing a novel system based on the combination of Dual Polarization Differential Quadrature Phase Shift Keying (DP-DQPSK) and Dense Wavelength Division Multiplexing (DWDM) technique and by using the Direct Detection (DD) technique. The system was designed with Optisystem software 18 and consist of 64 channels and each channel could transmit 14 Gbps of data rate. The channels 1,6,12,18,24,30,36,42,48,54,60 and 64 were selected as samples among all channels to be investigated and analyzed. Additionally, the proposed system was investigated based on different distances and different parameters of Quality Factor (QF) and Bit Error Rate (BER). The significant contribution of the proposed system is that using the DD would result in a norequired for reference wave and that will result in a less complex system and easier to implement. Results obtained indicate higher quality QF for the sampled channel and lower BER values. For instance, the average QF obtained were in the range of 6.75-8.36 dBm and 6.77-8.35 dBm for data 1 and 2 respectively, which indicates the reliability and efficiency of the proposed system by considering all results obtained from distance variation were above the minimum threshold