Universiti Teknologi Malaysia Institutional Repository

Study of 5.8 GHz band-stop frequency selective surface (FSS)

Hong, T. Y. and Lee, Y. S. and Wee, F. H. and You, Y. K. and A. Karim, M. N. and Ramli, N. H. and Gan, Hong Seng and Jamlos, M. A. (2019) Study of 5.8 GHz band-stop frequency selective surface (FSS). International Journal of Integrated Engineering, 11 (4). pp. 244-251. ISSN 2229-838X


Official URL: http://dx.doi.org/10.30880/ijie.2019.11.04.028


This paper presents the study of 5.8 GHz frequency selective surface (FSS) acts as a band stop to eliminate unwanted radiation signal at 5.8GHz. The FSS was designed using computer simulation technology (CST) Microwave Studio software. The paper shows the comparison of square loop, octagon loop and hexagon loop of Band stop FSS (BSFSS) performance at 5.8 GHz. Besides, the BSFSS design using four different type of dielectric substrate such as FR-4, TLY-5, Roger RT5870 and Roger RT5880 were compared. The results obviously show that the Rogers RY5880 has the attenuation -44.72 dB. The fabricated FSS were measured by using free space technique with two horn antennas connected to performance network analyzer (PNA). The measured and simulated results were compared. The results show that the square loop FSS structure have the better attenuation -26.76 dB (simulated) and -38.34 dB (measured) at 5.8 GHz.

Item Type:Article
Uncontrolled Keywords:attenuation, bandstop, FSS
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Electrical Engineering
ID Code:89343
Deposited By: Yanti Mohd Shah
Deposited On:22 Feb 2021 14:04
Last Modified:22 Feb 2021 14:04

Repository Staff Only: item control page