Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Gupta, Rajeev Kumar and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Ghandvar, Hamidreza (2018) Investigation of Corrosion Protection Performance of Multiphase PEO (Mg2SiO4, MgO, MgAl2O4) Coatings on Mg Alloy Formed in Aluminate-Silicate- based Mixture Electrolyte. Protection of Metals and Physical Chemistry of Surfaces, 54 (3). ISSN 2070-2051
Full text not available from this repository.
Official URL: https://doi.org/10.1134/S2070205118030231
Abstract
Plasma electrolytic oxidation (PEO) coatings in the aluminate-silicate-based mixture electrolyte solution with different duty cycles were successfully applied on Mg alloy. The corrosion behavior of the samples was evaluated by water contact angle test, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and immersion tests. Hydrophobic PEO coating could be obtained by adjusting the duty cycle of the applied electric signal. This coating considerably diminished the Mg dissolution and could enhance the impedance values of Mg alloy in 3.5 wt % NaCl solution. However, the surface of other PEO coated samples showed more hydrophilic properties compared to that of the uncoated sample. Dense structure of the modified PEO multiphase (including Mg2SiO4, MgO and MgAl2O4 phases) coating and also its appropriate thickness provided an effective barrier to remarkably delay corrosive solution penetration into the PEO coating. This phenomenon led to major decrease in anodic current density of alloy in chloride solution.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | multiphase ceramic coatings, corrosion |
| Subjects: | T Technology > TJ Mechanical engineering and machinery |
| Divisions: | Mechanical Engineering |
| ID Code: | 84113 |
| Deposited By: | Siti Nor Hashidah Zakaria |
| Deposited On: | 16 Dec 2019 03:22 |
| Last Modified: | 16 Dec 2019 03:22 |
Repository Staff Only: item control page
