Universiti Teknologi Malaysia Institutional Repository

The use of TiAIN coated carbide tool when finish machining hardened stainless steel

Noordin, M. Y. and Tang, Y. C. and Kurniawan, D. (2007) The use of TiAIN coated carbide tool when finish machining hardened stainless steel. International Journal Precision Technology, 1 (1). pp. 21-29. ISSN 1755-2060

[img] PDF - Published Version
Restricted to Repository staff only


Official URL: http://dx.doi.org/10.1504/IJPTECH.2007.015341


The introduction of hard turning has provided an alternative to the conventional processing technology used to manufacture parts made from hardened steels. Shorter product development time along with being more environmentally friendly are among the benefits offered by hard turning, which potentially results in lower manufacturing cost per part. However, common tool materials for hard turning applications are expensive. Due to the continuous developments in cutting tool materials and coating technology, inexpensive coated carbide cutting tools are being investigated to determine the potential of using them for use in extreme conditions as in hard turning. TiAlN coated carbide tool was selected to finish machine hardened steel. Performing hard turning dry at various cutting conditions, that is, cutting speed and feed rate, revealed that satisfactory tool life values and surface finish values that meet the strict range of finish machining were obtained when finish machining hardened steel of 47?48 HRC hardness

Item Type:Article
Uncontrolled Keywords:hard turning, coated carbide, tool life, surface roughness, wear mechanisms, finish machining, hardened stainless steel, cutting tool materials, tool coatings, cutting speed, feed rate
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:8121
Deposited By: Norshiela Buyamin
Deposited On:27 Mar 2009 08:37
Last Modified:12 Oct 2017 00:55

Repository Staff Only: item control page