Universiti Teknologi Malaysia Institutional Repository

Investigation of the application of Nd:YAG laser welding to couple photonic devices and packaging

Fadhali, Mohamed M. and Zainal, Jasman and Munajat, Yusuf B and Ali, Jalil B and Rahman, R (2007) Investigation of the application of Nd:YAG laser welding to couple photonic devices and packaging. Lasers in Engineering, 17 (5-6). pp. 273-286.

Full text not available from this repository.

Abstract

In this paper we discuss some investigations and analyses of the various parameters, which contribute to increase the coupling efficiency of a laser diode to a single mode fibre-coupling using the lens coupling, which provides a coupling efficiency of about 75% at the optimum working distance. The separation between the coupling optics and the single mode fibre is in the range of 5-10 μm. The alignment during the coupling process and welding of the lens holder, fibre ferrule, and welding clips was carried out using the automated laser welding system, LW4000S from Newport. The results of optimising the laser beam parameters to produce sound welds with small heat affected zones (HAZ) when changes occur in the weld dimensions, as a result of a change in the laser beam parameters, are also discussed. The weldability of various metals was checked to determine the suitability for the base material and welding tools for packaging of photonic devices.

Item Type:Article
Uncontrolled Keywords:Coupling, laser welding. lens coupling, packing,tapered fibre
Subjects:Q Science > QC Physics
Divisions:Science
ID Code:7508
Deposited By: Maznira Sylvia Azra Mansor
Deposited On:07 Jan 2009 09:12
Last Modified:07 Jan 2009 09:12

Repository Staff Only: item control page