Universiti Teknologi Malaysia Institutional Repository

Simulation studies of gas-solid in the riser of a Circulating Fluidized Bed

Hussain, A. and Ani, F. N. and Darus, A. N. and Mustafa, A. and Salema, A. A. (2005) Simulation studies of gas-solid in the riser of a Circulating Fluidized Bed. In: Proceedings of the 18th International Conference on Fluidized Bed Combustion.

Full text not available from this repository.

Official URL: http://www.scopus.com


A numerical parametric study was performed on the influence of various riser exit geometries on the hydrodynamics of gas-solid two-phase flow in the riser of a Circulating Fluidized Bed (CFB). A Eulerian continuum formulation was applied to both phases. A two fluid framework has been used to simulate fully developed gas-solid flows in vertical riser. A two dimensional Computational Fluid Dynamics (CFD) model of gas-particle flow in the CFB has been investigated using the code FLUENT. The turbulence was modeled by a k-ε turbulence model in the gas phase. The simulations were done using the geometrical configuration of a CFB test rig at the Universiti Teknologi Malaysia (UTM). The CFB riser column has 265 mm (width), 72 mm (depth) and 2.7 m height The riser is made up of interchangeable Plexiglas columns. The computational model was used to simulate the riser over a wide range of operating and design parameters. In addition, several numerical experiments were carried out to understand the influence of riser end effects, particle size, gas solid velocity and solid volume fraction on the simulated flow characteristics. The CFD model with a k-ε turbulence model for the gas phase and a fixed particle viscosity in the solids phase showed good mixing behaviour. These results were found to be useful in further development of modeling of gas solid flow in the riser.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:CFD; Eulerian; Hydrodynamics; Riser; Turbulence model
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:7252
Deposited By: Mohamad Ali Duki
Deposited On:07 Jan 2009 01:51
Last Modified:28 Aug 2017 08:41

Repository Staff Only: item control page