Universiti Teknologi Malaysia Institutional Repository

Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys

Bahador, A. and Saud, S. N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M. K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding in the World, 60 (6). pp. 1133-1139. ISSN 0043-2288

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

A Nd:YAG laser welding technique with varying pulse widths was employed to weld Ti-27 at.% Nb shape memory alloy plates, and subsequent phase transformation characteristics and microhardness of welds were systematically investigated. From microstructure observation, it is apparent that weld seams contain a columnar growth with the low pulse and transferred into a combined growth of columnar and planar with the high pulse width. Moreover, grains in the weld zone exhibited a finer size when compared to the unwelded zone. A small amount of NbTi4 was also found in the welds. In the forward transformation, transformation temperatures did not exhibit peaks, indicating the same behaviour as the original TiNb alloy. Microhardness of the TiNb welds increased as the pulse width increased when compared to the original TiNb alloy. However, little reduction in hardness occurred after a pulse width of 5 ms.

Item Type:Article
Uncontrolled Keywords:Hardness, Intermetallics, Laser beam welding, Microhardness, Neodymium lasers, Niobium, Shape memory effect, Welding, Welds, Columnar growth, Forward transformations, Microstructure observation, Nd:YAG laser welding, Pulsewidths, Shape memory, Ti-Nb alloy, Transformation temperatures, Titanium alloys
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:71966
Deposited By: Fazli Masari
Deposited On:23 Nov 2017 06:19
Last Modified:23 Nov 2017 06:19

Repository Staff Only: item control page