Nabgan, B. and Abdullah, T. A. T. and Nabgan, W. and Ahmad, A. and Saeh, I. and Moghadamian, K. (2016) Process simulation for removing impurities from wastewater using sour water 2-strippers system via Aspen Hysys. Chemical Product and Process Modeling, 11 (4). pp. 315-321. ISSN 2194-6159
Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....
Abstract
In this paper, Aspen Hysys v8.8 was used to simulate two strippers for sour water stripping process as the aim for removal of chemical impurities such as hydrogen sulfide, carbon dioxide and ammonia in wastewater. As a result of elimination of these impurities, the water can be reused. Comparison between single and two strippers and elevating the stripping efficiency was the objectives of the present study. The feed flow rate and compositions were specified according to the typical Chevron WWT process conditions. The simulation result shows that 100% ammonia was stripped into the two stripper system but only 24% stripped in the single stripper system. The result of H2O was almost same in both systems. The stripped water collected via the bottom of the Ammonia Stripper contains less than 10 ppm of hydrogen sulphide and less than 50 ppm of ammonia.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | Ammonia, Carbon, Carbon dioxide, Desulfurization, Hydrogen sulfide, Impurities, Removal, Stripping (removal), Ammonia stripper, Chemical impurities, Feed flow rate, Process condition, Process simulations, Sour water, Sour water strippers, Stripping efficiency, Hydrogen sulfide removal (water treatment) |
| Subjects: | T Technology > TP Chemical technology |
| Divisions: | Chemical Engineering |
| ID Code: | 71847 |
| Deposited By: | Fazli Masari |
| Deposited On: | 21 Nov 2017 08:17 |
| Last Modified: | 21 Nov 2017 08:17 |
Repository Staff Only: item control page
