Universiti Teknologi Malaysia Institutional Repository

Hard Turning of Stainless Steel using Wiper Coated Carbide Tool

Noordin, M.Y. and Kurniawan, D. and Sharif, S. (2007) Hard Turning of Stainless Steel using Wiper Coated Carbide Tool. International Journal of Precision Technology, 1 (1). pp. 75-84. ISSN 1755-2060

Full text not available from this repository.

Official URL: http://dx.doi.org/10.1504/IJPTECH.2007.015346


In recent years, tool manufacturers provide wiper geometry on cutting tools for turning applications with the purpose of increasing productivity and improving surface finish. Despite the potential added values, the use and study on wiper inserts are still lacking in quantity. This current study focuses on the performance of wiper coated carbide insert in hard turning with respect to tool life and surface finish. AISI 420 stainless steel hardened to 47–48 HRC was hard turned at various speeds and feeds ranging in finish turning parameters. Results showed that the maximum tool life of 18 min was achieved and the tool life decreased at higher cutting speeds and feeds. Wear occurred at both the rake and flank faces with crater formation exposing the carbide substrate indicating more severe wear on the rake face. The wiper coated carbide tool resulted in very fine surface finish, much better than the theoretical values.

Item Type:Article
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:6571
Deposited By: Mohamad Ali Duki
Deposited On:26 Sep 2008 02:33
Last Modified:22 Oct 2017 01:51

Repository Staff Only: item control page