Universiti Teknologi Malaysia Institutional Repository

Direct torque control of induction motor drives using space vector modulation (DTC-SVM)

Ismail, Zool Hilmi (2005) Direct torque control of induction motor drives using space vector modulation (DTC-SVM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.



Direct Torque Control is a control technique used in AC drive systems to obtain high performance torque control. The conventional DTC drive contains a pair of hysteresis comparators, a flux and torque estimator and a voltage vector selection table. The torque and flux are controlled simultaneously by applying suitable voltage vectors, and by limiting these quantities within their hysteresis bands, de-coupled control of torque and flux can be achieved. However, as with other hysteresis-bases systems, DTC drives utilizing hysteresis comparators suffer from high torque ripple and variable switching frequency. The most common solution to this problem is to use the space vector depends on the reference torque and flux. The reference voltage vector is then realized using a voltage vector modulator. Several variations of DTC-SVM have been proposed and discussed in the literature. The work of this project is to study, evaluate and compare the various techniques of the DTC-SVM applied to the induction machines through simulations. The simulations were carried out using MATLAB/SIMULINK simulation package. Evaluation was made based on the drive performance, which includes dynamic torque and flux responses, feasibility and the complexity of the systems.

Item Type:Thesis (Masters)
Additional Information:Thesis (Master of Engineering (Electrical - Mechatronics & Automatic Control)) - Universiti Teknologi Malaysia, 2005; Supervisor: Dr. Nik Rumzi Nik Idris.
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Electrical Engineering
ID Code:3605
Deposited By: Widya Wahid
Deposited On:13 Jun 2007 08:51
Last Modified:07 Jan 2018 08:17

Repository Staff Only: item control page