Universiti Teknologi Malaysia Institutional Repository

Cheaper cement formulation for lost circulation control

Samsuri, Ariffin and Phuong, B. T. N. (2002) Cheaper cement formulation for lost circulation control. In: Fourth Biennial Asia Pacific Drilling Technology Conference (APDT 2002), 9-11 September 2002, Jakarta, Indonesia., 9 - 11 September 2002, Jakarta, Indonesia.

[img] PDF


Laboratory experiments had been carried out by using G and special blended cement with various amount and types of standard cement additives and various amount of local bentonite and sugar cane fiber. The ASTM-C 114 and AAS procedures were used for the chemical analysis and API Spec. 10 procedures under atmospheric and reservoir conditions for the cement performance. One of the serious cementing problems is a lost circulation whoch may occur in high permeability, formation, vugs or naturally fractured formation. Therefore this study focused on development of a cement mixture to overcome lost circulation problem and also strong enough to hold casing with minimize damage to potential producing formation. The results shown that optimum size of local bentonite ranging from 150-250μm and sugar cane fiber ranging from 2000-2800μm. A suitable cement system formulation for optimum lost circulation control is 9% local bentonite, 2% calcium chloride and 0.5 sugar cane fiber with adequate shear bonding strength and formation permeability reduction is about 10%. Generally, special blended cement has less free water and fluid loss, better strength development but shorter thickening time than G cement. The cost of blended cement is cheap, bentonite is a local material and sugar cane fiber is a waste material, therefore there will be about 48% of the cement material cost saving if this cement formulation is used for an average oil well at 8000ft depth. This formulation also proves to be the cheaper choice for cementing job, particularly the shallow well due to the shorter thickening time.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:cement, lost circulation control, free water, fluid loss, thickening time, bonding, formation damage
Subjects:T Technology > TP Chemical technology
T Technology > TN Mining engineering. Metallurgy
Divisions:Chemical and Natural Resources Engineering
ID Code:3500
Deposited By: Prof Dr Ariffin Samsuri
Deposited On:22 Jul 2017 08:15
Last Modified:27 Aug 2017 06:39

Repository Staff Only: item control page