Universiti Teknologi Malaysia Institutional Repository

Mechanical properties of unplasticised PVC (PVC-U) containing rice husk and an impact modifier

Rahmat, Abdul Razak and Hassan, Azman and Ahmad, Mazatusziha (2010) Mechanical properties of unplasticised PVC (PVC-U) containing rice husk and an impact modifier. Polymers & Polymer Composites, 18 (9). 527 - 536. ISSN 0967-3911

Full text not available from this repository.

Official URL: http://www.polymerjournals.com/pdfdownload/1081685...

Abstract

The objective of this study was to investigate the effects of rice husk and acrylic impact modifiers on the mechanical properties of unplasticised poly(vinyl chloride) (PVC-U) composites. The composites were prepared using a two-roll mill at temperature 165 °C before being hot pressed at 185 °C. The incorporation of rice husk (RH) fillers from 10 to 40 per hundred resin (phr) has increased the flexural and tensile modulus of the unmodified and modified (8 phr impact modifier) PVC-U composite. The flexural strength for both unmodified and modified PVC-U composite was observed to increase until RH loading of 20 phr. However, the tensile and impact strength of PVC-U composite decreased with RH loading. The scanning electron microscopy (SEM) showed that the rice husk fillers agglomerated and unevenly distributed throughout the matrix. The result showed that the impact strength of the filled PVC-U composites (20 phr filler) increased but the tensile and flexural properties decreased with increasing impact modifier content. The formulation containing 8 phr of acrylic impact modifier and 20 phr of RH loading showed the best balance of stiffness and toughness properties.

Item Type:Article
Uncontrolled Keywords:unplasticised PVC, rice husk, acrylic impact
Subjects:Q Science > QD Chemistry
Divisions:Chemical Engineering
ID Code:26272
Deposited By: Narimah Nawil
Deposited On:29 Jun 2012 11:38
Last Modified:30 Nov 2018 14:24

Repository Staff Only: item control page