Universiti Teknologi Malaysia Institutional Repository

Analisa terhadap rekabentuk bingkai kalibrasi bagi kamera digital untuk fotogrametri jarak dekat

Abdul Rahman, Fazli (2006) Analisa terhadap rekabentuk bingkai kalibrasi bagi kamera digital untuk fotogrametri jarak dekat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering; Department of Geomatic Engineering.



Close range photogrammetry is an easy and swift method to obtain the dimensions of objects from images captured by cameras. The types of cameras used in photogrammetry can be classified into two, namely, metric and non-metric. The difference between these two types of cameras is the stability of their inner orientation parameters. Metric cameras have very stable inner orientation parameters compared to non-metric cameras. This research employed the use of non-metric cameras to analyse the design of a calibration frame in order to determine their inner orientation parameters. The designed of the frame is based on the optimum number of points and target sizes. In total, three camera calibration frames have been used in this study. The inner orientation parameters of a kodak dc290 and canon ixus s400 were determined. The software used to perform the calibration was australis 5.0. Results have shown that an optimum number of points required to produce accuracy 1:15,000 is 53 with 3 mm target sizes. Validation of the results was done using independent systems and the difference, 0.05mm. It is therefore can be concluded that the calibration frame designed in this study is suitable to be used for calibrating non-metric cameras with high accuracy

Item Type:Thesis (Masters)
Additional Information:Thesis (Sarjana Sains (Kejuruteraan Geomatik)) - Universiti Teknologi Malaysia, 2006
Uncontrolled Keywords:cameras, images
Subjects:H Social Sciences > HD Industries. Land use. Labor
T Technology > TR Photography
Divisions:Geoinformation Science And Engineering (Formerly known)
ID Code:2129
Deposited By: Dina Amalia Nordin
Deposited On:28 Mar 2007 14:57
Last Modified:13 Jun 2018 15:05

Repository Staff Only: item control page