Universiti Teknologi Malaysia Institutional Repository

Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V

Rahim, Erween A. and Sharif, Safian (2009) Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V. International Journal of Manufacturing Technology and Management, 17 (4). p. 327. ISSN 1368-2148

Full text not available from this repository.

Official URL: http://dx.doi.org/10.1504/IJMTM.2009.023950

Abstract

Drilling of Ti-6A1-4V with Supernitride coated carbide tool gave better performance in term of tool life compared to TiAlN coated carbide tool. The use of 25 m/min cutting speed shows improvement in tool life performance. Non-uniform, flank wear, excessive chipping and micro-cracking were the dominant tool failure modes under most tested conditions. Adhesion, attrition and diffusion were the operating wear mechanism on both tools when drilling Ti-6A1-4V.

Item Type:Article
Uncontrolled Keywords:drilling, supemitride, TiAlN, tool life, tool wear, wear mechanism
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:14181
Deposited By: Zalinda Shuratman
Deposited On:26 Aug 2011 05:06
Last Modified:07 May 2017 07:05

Repository Staff Only: item control page