Effect of chitin source on properties of chitin nanowhiskers filled polylactic acid composites

Abstract

This study investigates the use of chitin nanowhiskers (CHW) from different chitin sources to develop CHW reinforced polylactic acid (PLA) nanocomposite. Chitin sources used in this study were commercial chitin (CC), fermented chitin (FC) and treated fermented chitin (TFC) whereby FC and TFC were obtained from fermentation of prawn waste. The chitin was then undergoes acid hydrolysis to produce commercial chitin nanowhiskers (CCHW), fermented chitin nanowhiskers (FCHW) and treated fermented chitin nanowhiskers (TFCHW). PLA was chosen due to several advantages such as biodegradability, good mechanical strength and in line with global pressure to improve environmental pollution aspects. Tensile strength for PLA/FCHW, PLA/TFCHW and PLA/CCHW increased with increasing filler content until it reached optimum value at 1 phr, 2 phr and 3 phr, respectively. Young's modulus for the nanocomposites increased with increasing filler content but elongation at break decreased significantly with increasing filler content for all types of nanocomposites. TGA results indicated that PLA/CHW nanocomposites displayed better thermal stability as compared to pure PLA. The biodegradability and water absorption of nanocomposites increased with increasing filler content. The overall results confirm that PLA nanocomposites from FC are not inferior than PLA nanocomposites from CC and therefore has similar potential to be used in packaging applications.