Enhanced performance of Mindel membranes by incorporating conductive polymer and inorganic modifier for application in direct methanol fuel cells

Abstract

Sulfonated polyethersulfone (SPES), polyaniline (PANI), and Cloisite 15 A® were used as modifiers for the fabrication of Mindel composite polymer electrolyte membranes (PEMs). Pristine Mindel and Mindel composite PEMs were fabricated by the solution intercalation technique. The presence of modifiers in the Mindel membrane matrix was confirmed by Fourier transform infrared (FTIR) studies. The primary characteristics of pristine Mindel and Mindel PEMs such as water uptake, methanol uptake, proton conductivity ion-exchange capacity (IEC), and chemical and mechanical stability were evaluated. The pore size of Mindel/SPES/Cloisite 15 composite PEM was increased owing to the addition of SPES and Cloisite 15. The higher proton conductivity of 4.323 × 10−4 S cm−1, enhanced IEC of 0.482 mequiv. g−1, and maximum water uptake (%) of 38.12 were noted for Mindel/SPES/Cloisite membrane. Membrane selectivity of all Mindel PEMs was enhanced by the addition of modifiers. The results of this study indicate that Mindel composite membranes could be utilized as PEMs for direct methanol fuel cell (DMFC).