Ayob, O. and Rahim, M. K. A. and Masri, Thelaha and Karim, M. N. A. and Aziz, M. Z. A. Abd. (2007) Modified slotted patch electromagnetic band gap for antenna array application. In: Proceedings of Asia-Pacific Microwave Conference 2007, 11-14 Dec. 2007, Bangkok, Thailand.
Restricted to Repository staff only
Official URL: http://dx.doi.org/10.1109/APMC.2007.4554718
A modified slotted patch EBG structure has been investigated by measuring the forward transmission coefficient, S21. The thickness and dielectric constant of the substrate, the size and the gap of the elements in EBG structure has been modified and simulated to see the S21 value and followed by a discussion of the design and the evaluation of the structure itself. The simulation process was carried out using microwave office 2006 software. The 3 by 3 Modified Slotted patch EBG structures which has 11 mm Ã— 11 mm elements size was fabricated using inexpensive Fire Retardant-4 (FR4) board, using wet etching techniques. The stimulated and measured S21 result shows the band gap of the structure, which are found to be between 2.24 GHz and 2.6 GHz at -20 dB. This structure is then incorporated into a 2 by 2 rectangular microstrip antenna array, operating at 2.4. The result shows that the radiation pattern improved with reducing side and back lobe with an extra gain of 1 dB compared with the antenna without the EBG structure.
|Item Type:||Conference or Workshop Item (Paper)|
|Additional Information:||Microwave Conference, 2007. APMC 2007. Asia-Pacific|
|Uncontrolled Keywords:||Electromagnetic Band Gap (EBG), microstrip antenna array, periodic structure, slotted patch|
|Subjects:||T Technology > TK Electrical engineering. Electronics Nuclear engineering|
|Deposited By:||Maznira Sylvia Azra Mansor|
|Deposited On:||02 Jan 2009 03:26|
|Last Modified:||12 Oct 2010 09:19|
Repository Staff Only: item control page