Universiti Teknologi Malaysia Institutional Repository

Ultimate strength prediction of DRM timber beams by plastic approach: experimental results and discussions

Saleh, Abd. Latif and Abu Bakar, Suhaimi and Mohamed, Zainai and Khin, Maung Zaw (2006) Ultimate strength prediction of DRM timber beams by plastic approach: experimental results and discussions. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

[img]
Preview
PDF (Full text)
177Kb

Abstract

A new stress model is developed to predict the ultimate bending strength of solid timber beams by using the principle of plasticity. The model predicts the actual bending strength of timber beams from the ratio of ultimate tensile and compressive strengths of the beam material. Standard bending, tension and compression tests are conducted on structural sized specimens to verify the proposed stress model using a local hardwood timber, Dark Red Meranti (DRM). The experimental results of 12 beams, 10 tension specimens and 15 compression specimens are used to verify the proposed model. Test results showed that there is a significant non-linear relationship of the load and the deformation for timber in bending and in compression, but the stress-strain relationship is linear in tension. The strain is linearly distributed across the beam section throughout the test, and the neutral axis shifts towards the tension side when the beam is loaded beyond the proportional limit. Although the tensile strength of timber is larger than its compressive strength, modulus of elasticity (MOE) in tension and compression is approximately the same.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:Timber beams; ultimate strength prediction; mathematical stress model; bending
Subjects:T Technology > TA Engineering (General). Civil engineering (General)
Divisions:Civil Engineering
ID Code:609
Deposited By: Pn Khairulbahiyah Yaakub
Deposited On:21 Feb 2007 02:15
Last Modified:01 Jun 2010 02:46

Repository Staff Only: item control page