Universiti Teknologi Malaysia Institutional Repository

Evaluation of the equivalent lumped element parameters of modified microstrip ring resonator

Yi, Lung Then and Kok, Yeow You and Dimon, Mohamad Ngasri and Wei, Ying Lai (2015) Evaluation of the equivalent lumped element parameters of modified microstrip ring resonator. In: Applied Mechanics and Materials, 2015.

Full text not available from this repository.

Official URL: https://www.scientific.net/AMM.735.278

Abstract

Microstrip ring resonator (MRR) sensor was modeled by simple equivalent lumped element circuits in free space based on simulation data obtained from Microwave Office (AWR) simulator and comparison was made with the measurements using the E5071C Network Analyzer. The calculated reflection coefficient, |G| and complex input impedance Zin using lumped element model were compared with the measurements results. Both results showed well agreement with a little discrepancy, basically due to imperfect soldering. The MRR was designed to have operating frequencies between 0.5 GHz and 4.5 GHz. The maximum surrounding of magnetic field, H? is within 15 A/m in free space.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:microstrip, reflection coefficient
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Electrical Engineering
ID Code:60648
Deposited By: Widya Wahid
Deposited On:21 Feb 2017 08:06
Last Modified:06 Aug 2017 03:02

Repository Staff Only: item control page