Universiti Teknologi Malaysia Institutional Repository

Labview based driver for charge-coupled device linear image sensor

Ramli, N. and Ibrahim, M. N. and Idroas, M. and Che Harun, F. K. and Mahmood, N. H. (2011) Labview based driver for charge-coupled device linear image sensor. Jurnal Teknologi (Sciences and Engineering), 55 (1). pp. 129-140. ISSN 0127-9696

Full text not available from this repository.

Abstract

This paper describes the development of LabVIEW based driver for charge-coupled device (CCD) linear image sensor in optical tomography system. The Sony ILX551A CCD linear image sensor contains 2048 effective pixels, each pixel approximately 14 microns in size. The sensor requires suitable clocking signals (FROG and FCLK) before the pixel values that represent the attenuated optical intensity can be serially read. The output from the CCD is the optical intensity measured in voltage or shadow of the object intercepting the optical beam, pathlength between light source and the CCD linear image sensor. When solid particles blocking certain area of the optical path length, the shadow of the object will be casted on several affected pixels of the linear image sensor, and value on the output signal will be obtained. The exact location of objects on output signal produced for various conditions is important in order to verify the proper clocking signals generated for Sony ILX551A. The results demonstrate that the clocking signal at 1MHz frequency for the CCD Sony ILX551A is successfully generated and capable of acquiring tomographic data.

Item Type:Article
Uncontrolled Keywords:linear image sensor
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Electrical Engineering
ID Code:45012
Deposited By: Haliza Zainal
Deposited On:27 Apr 2015 04:50
Last Modified:01 Nov 2017 04:17

Repository Staff Only: item control page