Universiti Teknologi Malaysia Institutional Repository

Locally produced cement as a possible alternative for the oilwell cement

Samsuri, Ariffin and Shahrudin, Shahrin (1993) Locally produced cement as a possible alternative for the oilwell cement. In: Conference, 1993.

[img] PDF
544kB

Abstract

Calcareous and argillaceous materials are raw materials used in making ordinary portland cement and portland cement class G with their main chemical compound consist of tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetracalcium aluminoferrite. Currently, the class G cement used for the oil and gas wells cementing operations is imported from other countries. Therefore, suitability studies of our locally produced ordinary portland cement and blended cement were carried out to overcome this matter. To justify their ability to be used in the oil and gas wells cementing operations, they must comply with the standards set by the American Petroleum Institute (API) interms of their chemistry and physical properties requirements. Chemical analysis according to ASTM C115 were carried out to determine the composition. Compressive strength, free water, thickening time and fluid loss were carried out according to API Specification 10 and were conducted at simulated reservoir condition. Generally, locally produced cement proved chemically and physically to comply within the API Specification and has the possibility to be used for the oil and gas wells cementing operations.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:Portland cement, class G cement, wells cementing
Subjects:T Technology > TP Chemical technology
Divisions:Chemical and Natural Resources Engineering
ID Code:3551
Deposited By: Prof Dr Ariffin Samsuri
Deposited On:20 Jun 2017 06:56
Last Modified:27 Aug 2017 03:02

Repository Staff Only: item control page