Universiti Teknologi Malaysia Institutional Repository

Promoted selection non-catalytic reduction: prospective technology for nitrogen oxide reduction

Abu Hossain, Khandoker and Mohd. Jaajar, Mohammad Nazri and Ani, Farid Nasir (2004) Promoted selection non-catalytic reduction: prospective technology for nitrogen oxide reduction. Asean Journal of Chemical Engineering, 4 (1). pp. 19-24. ISSN 1655-4418

Full text not available from this repository.

Official URL: https://jurnal.ugm.ac.id/AJChE/article/view/50845

Abstract

Promoted selective non-catalytic reduction (SNCR) of nitric oxide (No) has been studied experimentally by injecting aqueous urea solution with and without additive in a pilot-scale diesel-fired tunnel furnace at 3-4 %excess oxygen level and with low ppm of baseline NO~ ranging from 65 to 75 ppm within the investigated temperature range. The tests were carried out using commercial grade urea as NOx-reducing agent and commercial grade sodium carbonate (NaZC03 ) as additive. The furnace simulated the small-scale combustion systems where (a) operating temperatures are usually within 973-1,323 K and [b] NO,-emission level remains below 100 ppm. In the SNCR process with 5% urea solution, at normalized stoichiometric ratio (NSR) of 4, as much as 54% reduction was achieved at 1.128 K; while in the promoted SNCR process using Na2CO:;additive, NO~ reduction improved to as much as 69% at 1,093 K In addition, the effective temperature window as well as peak temperature of NO reduction shifted towards lower temperatures in promoted SNCR. These results were significant especially for the investigated level of baseline NO". The ammonia slip measurements showed that in both cases the slip was below 16 ppm at an NSR of 4 and an optimum temperature of NO", reduction. The investigations demonstrated that urea-based promoted SNCR may be used for small-scale combustion applications and that commercial grade Na"C03 is a potential additive.

Item Type:Article
Uncontrolled Keywords:optimum temperature, selective non-catalytic reduction (SNCR), temperature window, and urea additive
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:28195
Deposited By: Yanti Mohd Shah
Deposited On:18 Sep 2012 06:08
Last Modified:31 Jan 2022 08:37

Repository Staff Only: item control page