Saidina Amin, Nor Aishah and Anggoro, Didi Dwi (2004) Optimization of direct conversion of methane to liquid fuels over Cu loaded W/ZSM-5 catalyst. Fuel , 83 (4-5). pp. 487-494. ISSN 00162361
Full text not available from this repository.
Official URL: http://dx.doi.org/10.1016/j.fuel.2003.09.013
Abstract
The optimization of methane conversion to liquid fuels over copper loaded W/ZSM-5 catalyst was studied by utilizing experimental design from 'Statsoft Statistica' version 6.0 software. Response surface methodology was employed to determine the optimum methane conversion and C5+ selectivity. Numerical results indicated the optimum methane conversion of 29. 4% with the corresponding C5+ selectivity of 57.2% were achieved at 12.3vol% of O2, 203.9 ml/min of total feed flow rate, and %W doped of 3.2wt%. The optimum C5+ selectivity of 70.2% was attained at 7.6vol% of O2, 208.9 ml/min of total feed flow rate, and 3.2wt% of W content with the corresponding methane conversion of 26.7%. By means of variance analysis and additional experiments, the adequacy of this model is confirmed.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | optimization, direct conversion, methane, liquid fuels |
| Subjects: | Q Science > QD Chemistry |
| Divisions: | Chemical Engineering |
| ID Code: | 12334 |
| Deposited By: | Liza Porijo |
| Deposited On: | 19 May 2011 06:53 |
| Last Modified: | 22 Jul 2011 08:31 |
Repository Staff Only: item control page
