Universiti Teknologi Malaysia Institutional Repository

Optimization of a boron nitride nanotubes nanofluid-cooled microchannel heat sink at different concentrations

Yusof, Nur Liyana Nabihah and Shamsuddin, Hielfarith Suffri and Estelle, Patrice and Mohd. Ghazali, Normah (2023) Optimization of a boron nitride nanotubes nanofluid-cooled microchannel heat sink at different concentrations. Journal of Thermal Analysis and Calorimetry, 148 (8). pp. 3117-3127. ISSN 1388-6150

Full text not available from this repository.

Official URL: http://dx.doi.org/10.1007/s10973-022-11545-8

Abstract

The microchannel heat sink (MCHS) has become the most relevant micro-heat exchanger for a small area in need of an effective high heat removal system. However, heat dissipation from the microchips where the MCHS is utilized—the microprocessor and microcontroller—is getting higher with the sizes getting smaller. A more effective coolant is needed to address the increasing heat load from the microchip and nanofluid, nanosized particles dispersed in a base fluid, is among those explored. This paper reports a new potential use of non-metallic nanofluid, boron nitride nanotube (BNN), that is capable of improving the overall performance of a rectangular MCHS. A heuristic method, multi-objective genetic algorithm (MOGA), is employed to simultaneously minimize the thermal resistance and pressured drop of a boron nitride nanotubes (BNN) nanofluid-cooled MCHS to obtain optimized dimensions at various mass concentrations. The method is capable in achieving conflicting objectives, minimization of the thermal resistance and the pressure drop; an increase in the former decreases the latter and vice versa. In addition, experimental thermophysical properties of the BNN nanofluid are used to provide reliability to the optimization outcomes in identifying the best BNN concentration for cooling of a MCHS at 50 °C. The optimization results showed that as the thermal resistance decreases, the pressure drop decreases. For mass concentrations of 0.001, 0.003, 0.005, 0.01 and 0.03% the thermal resistance is the lowest, 0.0711 K/W at 0.01 mass.%. at 0.0115 W. The thermal resistance is lowered by 5.34% compared to water for the same operating conditions. These results indicate the great potential of BNN nanofluid as a coolant in the electronics cooling system. Optimization with the MOGA provides a fast analysis into the potentials of any coolants for MCHS applications as shown here, reliability being provided by experimentally obtained thermophysical properties.

Item Type:Article
Uncontrolled Keywords:boron nitride nanotubes nanofluid, microchannel heat sink, multi-objective genetic algorithm, optimization
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:104850
Deposited By: Yanti Mohd Shah
Deposited On:25 Mar 2024 09:01
Last Modified:30 Jun 2024 06:37

Repository Staff Only: item control page